Browse:  Machinery Electrical
RSS Linkedin Instagram Blog Surplus Record

ROLLS, PLATE BENDING, INITIAL & DOUBLE PINCH TYPE

Westbrook Engineering, Co.
There are 212 listings in this category
Update: Thur, Dec 5, 2019 12:03:22
Advanced Search
Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added
 
 
Original Sort

2' x 18 ga. Acrotech, 6" urethane roll, 3-1/2" upper steel roll, air drop end, '01, #25216

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

3' x 22 ga. Niagara powered slip rolls, 2" roll diameter, manual drop end, #13861T

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

3' x 16 ga. Akyapak #A-1050X56, IP roll, 2004

  Photo Spec Sheet
 RFQ
Action Machinery Inc, Louisville, KY 502-459-1313 (Email: actionky@bellsouth.net) Thomas Cheney

3' x 16 ga. Niagara, initial pinch roll, (3) 37" rolls, grooves machined for rolling rod 5/8", 1/2", 3/8"

 
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

3' x 13 ga. Carando #R5603, pneumatic feed table., 5 HP, 6" diameter rolls, 1956, #12450

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

3.4' x 20 ga. Slip Roll, 2" roll diamter, hand crank, wire grooves, #27470

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

3.5' x 22 ga. Hendley #2-42-Niagara/416E-Pexto, initial pinch plate roll, (2) machines on one base

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

4' x 18 ga. Pexto #418E, initial pinch power roll, 3" roll diameter, 15 FPM, 3/4 HP, manual drop end, #7359

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

4' x 16 ga. Birmingham #X-5016C, manual slip roll, 3:1 gear ratio, (3)wire grooves, new, #SMX5016C

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

4' x 16 ga. Lown #B300, initial pinch power roll, serial #B-3342, #6159

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

4' x 16 ga. National #NR4816, forward & reverse drum switch, front gear, foot switch, stand, 7.5 HP, new, #SMNR4816

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

4' x 16 ga. Peck Stow & Wilcox #3418, plate rolls, initial pinch, 3" roll

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

4' x 16 ga. Pexto #418E, hand slip roll, 3" roll diameter, with stand, #5783

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

4' x 16 ga. Pexto #418E, power, 3" diameter rolls, initial, stand, 26 RPM, 2 HP, 1954, #30466

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

4' x 16 ga. Pexto #418E, 3-rolls, 3" diameter rolls, mechanical, powered steel metal roll, foot switch, #10448

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

4' x 16 ga. Pexto #3418, plate bending rolls, 3" diameter rolls, initial pinch, drop end

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

4' x 16 ga. Roper Whitney #3418-H, 3" top roll, 3-roll dr., rod grooves, 1988

  Photo Spec Sheet
 RFQ
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

4' x 14 ga. New Dimension #MP4-075, initial pinch power roll, serial #8871043, #5577

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

4' x 12-14 ga. Wysong & Miles #B48, plate bending roll, 4" roll diameter, 50" roll length, S40001

 
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

4' x 12 ga. Niagara #351, Initial Pinch Power Roll, #4992

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

4' x 12 ga. WDM, initial pinch, 4" diameter roll, variable speed, 3rd roll driven, new

 
 RFQ
Chrisgo Equipment Co., Inc., Milford, OH 513-575-1152 (Email: chrisgoeq@aol.com) Chris Wilson

4' x 10 ga. Davi #MCB-1219ZS, hydraulic, 4-roll initial pinch w/vert.support system, s/n #20140046, used, 2001, #A4642

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

4' x 10 ga. New Dimension, initial pinch, air drop end, for/rev foot pedal, man.adj.

 
 RFQ
Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Email: How@tznet.com) Fred Parker

4' x 8 ga. WDM, #B-5-48, 5" diameter roll, initial, hydraulic, power bending roll adjust., 3 HP, #20245

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

4' x 8 ga. Wysong & Miles #C-48, power plate roll, s/n #65067

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

4' x 1/4" Webb #R-3-L-R, slip roll, 6-1/2" roll diameter, 34" pass line, 12 FPM, air drop end, #27971

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

4' x 1/4" Wysong & Miles #Perfect-Circle, initial type bending roll, 6" roll diameter, power adjust., air drop end, Tag #15440

  Photo
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

4' x 5/16" Webb #R3LR-650, 6" diameter rolls, skid mounted, groved rolls for bending rounds

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

4' x 3/8" Pope #2-1/2 Pinch type plate rolling machine, 6" roll diameter, 10 HP, air drop end, 1953, #18774

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

4' x 5/8" Webb #6L, 8-16 FPM, manual drop end, power.rear roll adj., 10 HP, #7262P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

4' x 1-11/16" Bertsch #18, heavy duty, 50" rolls, 17" roll diameter, hydraulic drop end, 50 HP, #62696

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

4.16' x 24 ga. Tin Knocker #TK-2450, manual slip roll, 2" roll diameter, lifting split roll

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

4.2' x 10 ga. Hendley & Whittemore, initial pinch plate roll, 4.75" rolls

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

4.3' x 14 ga. Waldemar, 3-roll, 1.5 HP, 54" roll, 4-3/8" roll diameter, initial pinch plate roll

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

4.3' x 16 ga. Birmingham #X-5016E-C, light duty power slip roll, standard 3-wire grooves, foot pedestal stand, new, #SMX5016EC

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

4.3' x 8 ga. Saber #R0440H, Initial Pinch, hydraulic, 4-3/4" roll diameter, hardened, 2 HP

  Photo Spec Sheet
 RFQ
A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff

5' x 14 ga. Metalform #504R-HDP-6014, 4-roll hydraulic double pinch power roll, 2002, #6113

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5' x 14 ga. Niagara #353, initial pinch, 4" roll diameter, 15 FPM, manual drop end, #4548

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5' x 14 ga. Wysong & Miles #B-60, initial pinch, 4" roll diameter, 18 FPM, manua drop end, #4998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

5' x 13 ga. Chicago #IPR-5090, Initial Pinch Hydraulic Plate Roll, 3.9" roll diameter, Hydraulic drop end

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

5' x 12 ga. Americor #3RSP-100/5, 4-roll double pinch type plate roll, 3.93" rolls, DRO, new

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

5' x 12 ga. Brown & Boggs #4561, initial pinch power roll, #4808

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5' x 12 ga. Luna #8344-15120, CNC bending rolls, 3.54" roll diameter, 1996, #13593J

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

5' x 10 ga. Americor #4RDP-130/5, 4-roll double pinch type plate roll, 5.12" rolls, DRO, new

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

5' x 10 ga. Hendley & Whittemore #510, 5" roll diameter, 16 FPM, manual drop end, #4757

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5' x 10 ga. New Dimension #MP5.135, initial pinch power roll, 2 rolls, very low hours

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

5' x 10 ga. New Dimension #MP5-135 initial, 18 FPM, elec foot control forward-reverse

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Adams Machinery Co, Lake Bluff, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn

5' x 10 ga. New Dimension, 18 SFPM, 34" height, 3 HP, electric foot control, 2003

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Adams Machinery Co, Lake Bluff, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn

5' x 10 ga. WDM, initial pinch, V/S, 3rd roll driven, electric DRO, power rear roll adj., new

 
 RFQ
Chrisgo Equipment Co., Inc., Milford, OH 513-575-1152 (Email: chrisgoeq@aol.com) Chris Wilson

5' x 10 ga. WDM #B-5-60, initial pinch, 3-roll hydraulic, 5" diameter rolls, v-speed, DRO, 3 HP, '19, #30431

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

5' x 10 ga. WDM #403-5-5, pyramid type, 4-roll design, drop end, 2012

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Adams Machinery Co, Lake Bluff, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn

5' x 3/16" Akyapak #ASM-S140-15/5, plate roll, 5.5" roll diameter, separate moving control panel, induction hardened rolls

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

5' x 3/16" New Dimension #5.250, bending roll, 5 HP, 16 FPM, hydraulic drop end, forward/reverse, foot pedal, #157217

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

5' x 3/16" Waldemar #400-5.6-5.4, hyd 4-roll double pinch, power roll position & tilt, V/S, '99, #9480

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

5' x .250" Rowe pinch roll, 7" dia rolls, 62.5" btwn housings, 43" pass line, 25 HP DC

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

5' x 1/4" Saber #R-0570H, initial pinch, 7" roll diameter, coning, DRO, hyd bending roll

  Photo Spec Sheet
 RFQ
A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff

5' x 5/16" Akyapak #ASM-S170-15/7, Plate Roll, Separate Moving Control Panel, Induction Hardened Rolls, Motorized Back Roll

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

5' x 5/16" Americor, 7" roll diameter, hydraulic, drop end, Conical bending, console w/digital display, #30455

  Photo Spec Sheet Video icon
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

5' x 1-1/4" Herkules #UB12, IP, power drop end, cone rolling, remote ped.control, #5139

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5' x 1-1/2" Bertsch #14, initial type, air drop end, power rear roll adj, power front roll adj, 50 HP, #28776

  Photo
 Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

5' x 5.5" Cincinnati pinch roll, pneumatic roll hold down, 75" x 5.5" rolls, #69154

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

6' x 16 ga. Milton #M400, initial pinch power roll, #6201

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

6' x 16 ga. National #NR7216, hydraulic, forward & reverse drum switch, front gear, 1 HP, new, #SMNR7216

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

6' x 14 ga. Famar Carell #A-312-202, initial pinch plate bending roll

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

6' x 14 ga. Roundo, 4-roll, hydraulic, 4.3" roll diameter, hydraulic drop end, #27399

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

6' x 12 ga. Built Rite #P6.105, plate roll, #11468

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

6' x 12 ga. Webb #2L, slip roll, intital type, 5" roll diameter, 34" pass line, 3 HP, #27866

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

6' x .154" Hoston, new

  Photo
 RFQ
Plant Machinery & Equipment, Excelsior, MN 612-759-4866 (Email: pmempls@msn.com) Jerry Brokaw

6' x 3/16" Akyapak #ASM-S140-20/4, Plate Roll, Separate Moving Control Panel, Induction Hardened Rolls, Motorized Back Roll

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

6' x 3/16" Niagara #6-72, initial pinch plate bending roll, 6" roll diameter, 1972, #72594

 
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

6' x 3/16" Webb #R3L, 50" mech. working length, 3" roll diameter, 2 HP motor, 20 FPM

  Photo Spec Sheet
 RFQ
Cities Advanced Machinery, Eden Prairie, MN 952-944-6060 (Email: harry@cam-cnc.com) Harry Youtsos

6' x 7/32" WDM initial pinch, 6" diameter roll, cone attachment, DRO, new

 
 RFQ
Chrisgo Equipment Co., Inc., Milford, OH 513-575-1152 (Email: chrisgoeq@aol.com) Chris Wilson

6' x 1/4" Akyapak #ASM-S170-20/5, Plate Roll, Separate Moving Control Panel, Induction Hardened Rolls, Motorized Back Roll

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

6' x 1/4" Akypak, 3-roll initial pinch, DROs, drop end, cone rolling attach., exc., 2016

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Worldwide Machine Tool, Lewis Center, OH 614-496-9414 (Email: bill@worldwidemachinetool.com) Bill Garbe

6' x 1/4" U.S. Industrial, well equipped, inexpensive, new

 
 RFQ
Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams

6' x 1/2" Webb #7L-9006, initial pinch power roll, serial #6541, #5509

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

6' x 5/8" WDM #100-10-6, initial pinch, 10" roll diameter, cone attach, hydraulic dropend, 10 HP, 1998

 
 RFQ
Hoff Machinery, Inc, Minneapolis, MN 612-521-5700 (Email: nikki.greenwaldt@hoffmachinery.com) Sales Dept.

6.2' x 16-18 ga. Roper Whitney #PF4-74, initial pinch power roll, #9433

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

6.5' x 1/4" Akyapak #ASM-S190-20/6.0, 3-Roll Asymmetrical plate bend, digital display

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

6.6' x 1/4" Biko #2021 type B3, hydraulic bending roll, 8.46" top roll diameter, 7.57" lower roll diameter, 81" roll length, 2015, #28264

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

6.6' x 1/4" Birmingham #RH-0606, hydraulic plate bending double pinch roll, LED position indicator, new, #SMRH0606

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

6.6' x 1/2" Biko #B3-2021, double initial pinch plate bending machine, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sanson Machinery Group, Kirkland, WA 425-513-8263 (Email: aduenas@sansonmachinery.com) Ryan Ross

6.7' x .6" Waldemar #WDM403-11-6.58, hyd plate, double pinch, 11" top roll, 15 HP, #088477

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

6.8' x 3/16" Saber #R-0650H, initial pinch, 7" roll diameter, coning, DRO, hyd bending roll

  Spec Sheet
 RFQ
A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff

7' x 14 ga. Surianos, 4-3/4" roll diameter, power rear & top roll adjustment, drop end, #25495

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

7.33' x 2.36" Davi #MCB-2248/S, 4 roll, hyd plate roll bender, 10' x8' roller table., 1997

  Photo
 Visit Dealer's Equipment Listings  RFQ
Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

8' x 10 ga. Milton #21, air drop end, manual rear-roll adjustment, forward & reversing controls, 5 HP, 28803

  Photo
 Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

8' x 10 ga. Webb #R3LR-7008, initial pinch, 7" top roll, air drop, power roll adj.

  Photo Spec Sheet
 RFQ
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

8' x 3/16" Akyapak #ASM-S170-25/4, Plate Roll with Separate Moving Control Panel, Induction Hardened Rolls

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

8' x 1/4" Lown #B-600, initial pinch power roll, air drop end, power rear roll adj., #A3142

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

8' x 1/4" Webb #R2LR8008, initial bending roll, 7-1/2" roll diameter, air drop end, #72469

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

8' x 5/16" Bertsch Century II #7, initial pinch hydraulic roll, #12057

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

8' x 5/16" Durma #MRB-S-2508, initial pinch, manual drop end, 2-rolls driven, 15 FPM, '09

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

8' x 5/16" Hoston #W12-8X2500, 4 rolls, CNC Touchscreen prog.control on pedestal, new, 01/2015

  Photo
 RFQ
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

8' x 5/16" WDM #K-9-8, initial, hydraulic, 9" rolls, 2-roll driven, 22 FPM, 10 HP, 2016, #29488

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

8' x 5/16" Webb #R3L, initial pinch plate bending roll, 8" roll diameter, 15 FPM, drop end, forward/reverse, pendant control, 7.5 HP, #10796

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

8' x 3/8" Bertsch #8, bending roll, power rear roll adj., 9" diameter roll, 10 HP, 1947, #157563

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

8' x 3/8" Bertsch #8, plate roll, 8-1/2" roll diameter, 98" roll length, 44" pass line, 20 FPM, manual bottom roll adjustment, #28218

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

8' x 3/8" JMT Durma #HRB4-2510, 9.06" roll diameter, 10 HP, 4-roll, NC control, 2016, #29481

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

8' x 3/8" Lown #G900, initial pinch power roll, 9" top roll/8-5/8" bottom roll diameter, #7305HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

8' x 3/8" Webb #7L-9008, single pinch mechanical, very good condition, power. bending roll

 
 RFQ
Action Machinery Inc, Louisville, KY 502-459-1313 (Email: actionky@bellsouth.net) Thomas Cheney

8' x 1/2" Bertsch, plate roll, 15 HP, 1958

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

8' x 1/2" Montgomery #9650H, hydraulic plate roll, 20 HP, 17 FPM, hydraulic drop end, auto lube, pendant controls, 1977

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

8' x 1/2" Pullmax Kulma #PV5S, 3-rolls, initial pinch, hydraulic plate roll, 1968, #10552

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

8' x 1/2" Webb #7L-1108, initital pinch power roll, 11" roll diameter, 8-15 FPM, 2003, #7697HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

8' x 1/2" Webb #7L-1108, initial pinch rolls, 15 HP, 230 /460 V.

  Photo
 RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

8' x 9/16" IMCAR #S1HR12/4, 3-roll plate bending, 1/2" prebending, 15 HP, control, 2007

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sanson Machinery Group, Kirkland, WA 425-513-8263 (Email: aduenas@sansonmachinery.com) Ryan Ross

8' x 5/8" Webb #9L, initial pinch plate bending rolls, vari-speed, rebuilt 1999, #69938

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

8' x 5/8" Webb #9L, initial pinch, 12" diameter roll, power rear/front roll adj., rebuilt 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

8' x 5/8" Webb #9-L, initial pinch plate roll, serial #5175, #5493

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

8' x 5/8" Webb #9L-1208, initial pinch power roll, #4965

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

8' x 1" Bertsch #14, initial pinch roll, 14" roll diameter, air drop end, vari-roll speed, power front & rear roll adjustment, #13858T

  Photo
 RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

8' x 1" IMCAR #S1HR12/4, 3-roll plate bending, 1/8" -1" capacity, Fully hydraulic, DRO, 2009

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

8' x 1-1/4" Roundo #PS-420, plate bending roll, #18088

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

8' x 1-1/2" Bertsch #20, hydraulic, initial pinch, 3-roll, 20" top roll, 75 HP, 1980, #25791

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

8.2' x 3/8" Webb #6L, bending roll, #8383

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

8.33' x 3/16" Carell #A316-25/5, initial pinch, 7.5" rolls, 10.5 HP, pedestal control, 2004

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Equilibrium Machinery, Waukesha, WI 414-534-7512 (Email: anthony@equilibriummachinery.com) Anthony Zenobia

9.10' x 1.18" Malco #CLI-HY3R30/25-30, 3-roll, 18.8" diameter top, 17.7" diameter bottom rolls, 1996

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

10' x 20 ga. Rolshear #2-H, initial pinch, 4.5" top roll, 3-roll drive

  Photo Spec Sheet
 RFQ
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

10' x 12 ga. Wysong & Miles #D-120, initial pinch type bending roll, 6" rolls, plate rolls

  Photo Spec Sheet
 RFQ
Fram Fram LLC, New Hope, MN 612-940-8945 (Email: info@framfram.com) Russ Hilk

10' x 12 ga. Initial type plate roll, 5" diameter rolls, manual adjust, tag #14900

  Photo
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

10' x 10 ga. Hendley & Whittemore, 7" roll diameter, drop end, rear & bottom roll adj, #27622

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

10' x 10 ga. Hendley & Whittemore #4-H, 7" Roll diameter, manual drop end, #4985

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

10' x 10 ga. Webb #R3L, 7.5" diameter roll, 14 FPM, air drop end, power.roll adj., 7.5HP, #7331P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10' x 8 ga. Webb #R3L, Initial Pinch, #13117

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

10' x 1/4" Bertsch #8, 8.5" dia rolls, 3 rolls, 10 HP, air drop end, joy stick control

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

10' x 1/4" Birmingham #RH-1006, heavy duty hydraulic bending roll double pinch, LED position indicator, new, #SMRH1006

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

10' x 1/4" Grenen #HPV250/180X300, initial plate rolls, angle roll attach., 1987, #72516

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10' x 1/4" U.S. Industrial, well equipped, inexpensive, new

 
 RFQ
Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams

10' x 1/4" Webb #6L, initial pinch plate roll, 9" roll diameter, 15 FPM, air drop end, #70511

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10' x 3/8" Bertsch #8, initial pinch plate roll, 1947, #11201

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

10' x 3/8" Bertsch #9, 10" roll diameter, 15 HP, air drop end, forward & reverse, #10739

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

10' x 7/16" Faccin #3HCD, hydraulic, double initial pinch, 20 HP, 2001

  Photo Spec Sheet
 RFQ
FMI Trading LLC, Vinton, TX 915-207-5844 (Email: equipmentbuyers@hotmail.com) Frank Friesen

10' x 1/2" Bertsch #9, plate roll, 5CR Relay control panel, air drop end, gear guards, #A4924

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

10' x 1/2" Bertsch #11, plate roll, 11-1/2" roll diameter, 48" pass line, air drop end, w/control & automatic balance bar, #27678

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

10' x 1/2" Bertsch #11, initial plate bending roll, air drop end, lube system, #69138

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10' x 1/2" Faccin #4HEL3134, 4-roll, 13.4" top roll, hyd drop end, Siemens control, 2013

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

10' x 1/2" Haeusler #VRM-HY-3000x12, 4-roll, hydraulic drop end, 1968

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

10' x 1/2" Quantum #G3014-C, double pinch hydraulic 3-Roll, plate bender, digital display, permanent lube sys., new, #SMG3014C

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

10' x 1/2" Roundo #PS255/10, hyd plate roll, 10" roll diameter, 10 HP, hyd drop end, '13, #10730

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

10' x 1/2" Webb #9L-1210, 12" roll diameter, 6-12 FPM, air drop end, power rear roll adj, #8785P

  Photo
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10' x 5/8" Bertsch #11, 3-rolls, initial pinch plate roll, mechanical, power rear roll

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

10' x 1" Bertsch #20, Initial Pinch Type Plate Roll, all manuals & documentation, updated electrics, transformer included, 1962

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

10' x 1" Faccin Biko #B3-3138, Hyd 3-Roll plate roll, 16 FPM, 25 HP, hyd drop arm, #088472

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

10' x 1" Faccin Biko #B3-3138 hydraulic 3 roll plate bending rolls, 2012

  Photo Spec Sheet
 RFQ
Centra Corporation, Perry Hall, MD 410-945-0040 (Email: ed@centracorp.com) Ed/Mike/Thomas

10' x 1" Kumla #PV7H, hyd initial pinch plate roll, 14-49/64" roll diameter, 1975, #67336

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10' x 1" M.G. #M3028, hyd 4-roll initial pinch, 122" roll length, overhead support, #11160

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

10' x 1" Montgomery #4R-120100, 4-roll hydraulic ., drop end, cone bending attach., #C5128

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

10' x 1.378" Pullmax / Kumla #PV7H, double pinch power plate roll, hydraulic, 1976

 
 Visit Dealer's Equipment Listings  RFQ
Revolution Machine Tools Inc, North Salt Lake, UT 385-321-3934 (Email: kyle@rmtus.com) Kyle Jorgenson

10' x 1.5" Faccin #3HCI-3-45/38, 3-roll vari-Geometry plate roll, hyd drop end, '87/'06

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

10' x 1.5" Roundo #PS460/10, hyd double pinch roll, 60 HP, pendant control, 1980, #67277

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10' x 1-1/2" Webb #22L, 22" diameter roll, 60 HP, 10-18 FPM, Air Drop End Yolk, #5209

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

10' x 1-5/8" Bertsch #20, 28.5" diameter rolls, 6.5" opening, 75 HP, initial pinch, 1974, #10555

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

10' x 1.75" Biko #3HCD, double iniitial pinch, 20.9" top roll, hyd drop end, reconditioned'02

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

10' x 1.77" Faccin, 3-roll double pinch, Siemens PLC, cone bending attachment, rebuilt '08, #30352

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

10' x 1.969" M.G. #AK-350, 3 roll initial pinch hydraulic plate bending machine, 2008

  Photo Spec Sheet
 RFQ
Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Email: sales@escohou.com) R.G. Escandon

10' x 2" Bertsch #24, initial pinch plate roll, serial #M-9267, #6659

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10' x 2" Bertsch #24, IP plate roll, 22-1/2" top roll diameter, 23-1/2" lower roll diameter, #63395

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10' x 2" Bertsch #24, initial pinch plate roll, 100 HP main motor, GE controls new'11, #67380

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10' x 2" Bertsch #24, initial pinch plate roll, 100 HP main drive, 22.5" roll diameter, #10896

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

10' x 2.25" Davi, 4-roll, pyramid, Siemens Simatic multi-panel CNC Operator Terminal, Auto Balancing sys., '05, #CD5145

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

10' x 2.25" Davi Promau #MCB3060, hyd 4-roll initial pinch plate rolling machine, 2013

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

10' x 2.36" Faccin Biko #B3-3158, 3-roll double pinch, 22.83" top roll diameter, 75 HP, '14, #29111

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

10' x 2-3/8" Bertsch #30, mech, initial pinch, extra top roll, updated controls, under power

  Photo Spec Sheet
 RFQ
SMF & Machine Tools Inc, Little Rock, AR 800-643-5839 (Email: roger@smfmachine.com) Roger Huntsman

10' x 2-1/2" Bertsch #30, initial plate bending roll, drop end, 3 roll, mech., power rear roll, #10500

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

10' x 2-5/8" Bertsch #30, hydraulic, 0-16 FPM, hyd drop end, ind.hyd motors, 3 driven rolls, '81

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

10' x 2-3/4" M.G. #AK370, 3-Roll Pre-Pinch Plate Bending Roll

  Photo Spec Sheet
 RFQ
Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Email: sales@escohou.com) R.G. Escandon

10' x 5-1/8" M.G., 130mm x 3100mm 3-roll hydraulic double initial pinch

  Photo Spec Sheet
 RFQ
Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Email: sales@escohou.com) R.G. Escandon

10' x 8" Davi #MAV3010, 50" top roll diameter, Davi CNC, cone rolling, brand new, #18470

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

10.2' x 1/2" Webb #9L-1210, initial pinch plate bending roll, #6165

  Photo Spec Sheet
 RFQ
Steelcon LLC, New Waterford, OH 330-457-2419 (Email: allen@steelcon.co) Allen Hodge

10'2" x 5/8" Webb #9L, plate bending roll, s/n 55131, #S38913

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

12' x 16 ga. JM Montgomery Mfg. #14416H, #13624

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

12' x 11 ga. Eagle (Imcar), 3 roll double pinch, 7.8" top roll diameter, pedestal control, 1997

  Photo Spec Sheet PDF icon
 RFQ
Zimmerman-McDonald Machinery Inc, Saint Louis, MO 314-291-9360 (Email: brad@zimmermanmcdonald.com) Brad Zimmerman

12' x 11 ga. Eagle (Imcar) #SIHR-6/7, hydraulic 3 roll double pinch, 7.8" top roll diameter, 1997

  Photo
 Visit Dealer's Equipment Listings  RFQ
Diamond Jack Machinery Inc, Fort Smith, AR 479-785-2554 (Email: djm@diamondjackmachinery.com) Jack Yancey

12' x 3/16" Bertsch #7, initial pinch power roll, 9" roll diameter, 8-15 FPM, air drop end, #6471P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

12' x 3/16" Webb #6L, mechanical powered plate roll, 9" roll diameter, 8-16 FPM, 10 HP, start/stop push button

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

12' x 9/16" Bertsch #11, 14" top diameter, 20 HP, air drop end, pedestal control, vari-speed, #A5164

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

12' x 1/4" Bertsch initial pinch power roll, serial #8640, #5723

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

12' x 1/4" Webb #501, plate roll, 5" shaft diameter, pendant control, manual drop end, #3436

  Photo
 RFQ
Universal Metalworking Equip., Houston, TX 713-675-4145 (Email: sales@ume-inc.com) M. Feinstein

12' x 1/4" Lenco #H1212, 2 roll style, 12' length, 1/4" thick., 12" diameter top/bottom rolls, 1989

  Photo Spec Sheet
 RFQ
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

12' x 1/2" Bertsch #11, initial pinch rolls, 12-1/2" roll diameter, air drop end, #69569

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

12' x 1/2" Bertsch #11, 12.5" diameter rolls, 20 HP, V/S, power rear roll, air drop end

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

12' x 1/2" Webb #9L, plate roll, 25 HP motor with Westinghouse Max SE

 
 RFQ
Used Solutions Inc, Algonquin, IL 815-759-5000 (Email: markm@usedsolutions.com) Mark Mammen

12' x 1/2" Webb #9L, 12' plate roll, 25 HP motor with Westinghouse Max SE

  Photo
 RFQ
Used Solutions Inc, Algonquin, IL 815-759-5000 (Email: markm@usedsolutions.com) Mark Mammen

12' x 1/2" Webb #9L-1312 LH, air drop end, power front/rear roll adj, cone cap, '75, #7240P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

12' x 5/8" Bertsch #11, initial pinch, power roll adjustment, drop end, 1975

  Photo
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

12' x 5/8" Bertsch #11, initial pinch, 14" roll diameter, 20 HP, V/S, air drop end, no pit, #27210

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

12' x 5/8" Bertsch #11, initial pinch, 14" roll diameter, 20 HP, power roll adj, pneumatic drop end, 1975

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

12' x .625" Bertsch, serial #M10279

  Photo
 RFQ
Plant Machinery & Equipment, Excelsior, MN 612-759-4866 (Email: pmempls@msn.com) Jerry Brokaw

12' x 5.87" Voest Alpine, hydraulic (hot rolling) plate roll, used, #C5029

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

13' x 3/4" Bertsch #14, initial pinch plate roll, 13.2" roll space, 30 HP, 1960' s

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ Auction item
Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp

13' x 3/4" Bertsch #14, initial pinch plate roll, 16" top roll diameter, 13.2" roll space, 1957

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

13' x 2.5" Bertsch #30A, 3-roll IP, 19", 24" & 29" top/30" bottom rolls, hydraulic drop end, #30121

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

14' x 12 ga. Webb #6L, IP, 3-rolls, 7" roll diameter, 10 HP, power rear roll adjustment, #25280

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

14' x 1/4" Montgomery #16825H, 3-roll, hyd drop end, cone cap, 20 HP, S/N 091067, #15385

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Strand Industrial Machinery, Hamel, MN 763-478-0306 (Email: info@strandindustrialauctions.com) Dan Strand

14' x 1/4" Montgomery #16825K, hydraulic plate rolls, power roll adjust., 20 HP, #72183

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

14' x 5/8" Bertsch #75-14, 4-roll hydraulic plate roll, DRO, 30 HP, 0-14 FPM, 1994, #7996P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

15' x 1/4" Bertsch #11, initial pinch power roll, air drop end, powered rear roll adj., #5986P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

15' x 1/2" Bertsch #11, hyd plate roll, 15" roll diameter, 14 FPM, auto.tilt control, 1992, #71223

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

16' x 1" Bertsch #20, initial pinch bending roll, 3-roll design, 20" top roll diameter

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales

16' x 1" Hilles & Jones, 3 roll, 21" top roll, 60 HP V/S, hydraulic drop, PLC, no pit, reconditioned

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Charlie Peterson

18' x 7/8" M.G. / Heller #455/22, 4 Roll CNC plate bending roll, 40 HP, 2003, #10918

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

18.5' x 1-1/8" Bertsch #18, initial plate bending rolls plate roller former, 1957

  Photo
 Visit Dealer's Equipment Listings  RFQ
Bullseye Industrial Sales LLC, Middlebury, IN 574-825-4990 (Email: jeremy@bullseyeindustrialsales.com) Jeremy Wingard

20' x 1/4" Roundo #PS-320, hardended rolls, digital positioning readouts, remote operator control, late model

  Photo
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

20' x 1/4" Roundo #PS-320, hydraulic, hard rolls, digital positioning readouts, late mdl, #29109

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

24' x 1/4" Bertsch, mechanical plate roll, 15-1/2" roll diameter, initial rolling

  Photo
 Visit Dealer's Equipment Listings  RFQ
FMI Trading LLC, Vinton, TX 915-207-5844 (Email: equipmentbuyers@hotmail.com) Frank Friesen

24' x 1/4" Bertsch #M-9639, mechanical initial pinch plate roll, 15.5" diameter roll, #C5156

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

36' x 1/2" Bertsch #1, hydraulic plate roll, #C5103

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Bertsch #CNC400, bending rolls, 3-roll dsgn, infeed table for material, outfeed conveyor

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
AM Industrial, Brook Park, OH 216-433-7171 (Email: sales@amindust.com) Curt Wyman

MG #F03A. 2-rolls plate bending, pneumatic tilting sys., stock box & end pieces, 2015 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Silverlight CNC, Barrington, IL 847-450-1099 (Email: jeff@silverlightcnc.com) Jeff Katzbeck

Sampson #HPK-65, vertical angle bending rolls, double pinch, 2.5" capacity, 2010

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

Vibro-Shear #MM8 (Pullmax type), universal plate cutting/working/nibbler

  Photo
 RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

Back to Machinery & Machine Tool listings.


Photo = photo available    Spec Sheet icon = spec sheet available    PDF icon = PDF available    RFQ icon = request quote from seller    Video = video available    web site icon = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise