Browse: Machinery Electrical

Machinery & Equipment >

Rollformers >

Rollformers

ROLLFORMERS (Also See Sheet Metal Machinery)

There are 309 listings in this category
Update: Tue, Oct 20, 2020 00:34:34

Advanced Search

Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added

Original Sort

3 Stand, Yoder #M-2-1/2, rollformer, 2-1/2" shaft diameter, 14" roll space, 60 HP, #71510

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

4 Stand, Dexter rollformer, 5"roll space, 2.125"shaft dia., 3 HP, 9"horiz.centers

Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp

4 Stand, Tishken #4HW-AS-3, geared rollformer, 22"-36"roll space, 2"shaft, 40 HP, 2003, #7575BHP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

4 Stand, Tishken #10-MW-2, rollformer,2"spindle dia.,12"roll space,12"horizontal center,5" & 7"vertical adj.,#13735T

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

4 Stand, Tishken #4-MW-2, 2" arbor diameter, 14" roll space, 3" vertical adj., #72951

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

4 Stand, Yoder #M2 C-31-33-16, rollformer, #72138

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

4 Stand, Yoder #M2, 4 stand on 14 head base rollformer, 14" roll space, 2" shaft, #62019

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

5 Stand, Tin Knocker #TK-20, 20-26 ga., 5/16" depth of pocket, 25 FPM, Pittsburg lock

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

5 Stand, Yoder #M-3, 3" shafts, 16" roll space

Roll Form Solutions Inc., Grand Haven, MI 616-638-0407 (Email: steveebel@rollformsolutionsinc.com) Steve Ebel

5 Stand, Rollformer, 1"spindle dia, 8.5"roll space, 4"horizontal centers, 2"vertical

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

5 Stand, Rollformer, 1"dia. spdl., 8-1/2"roll space, 4"horizontal centers, #8616

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

6 Stand, Ardcor #5F, geared rollformer,5-1/2"roll space,1-1/2"shaft,7-1/2 HP,#7539P

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

6 Stand, Ardcor #5F, geared rollformer,5-1/2"roll space x 1-1/2"shaft,7-1/2 HP,#7540P

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

6 Stand, Bradbury #130RP, duplex rollformer, 36"wide, 2"arbors, 5 HP, #65252

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

6 Stand, Dalhstrom #350-6-OF, 1.25" spdl dia., 3.5"-4.5" roll dia., 4" roll space, 6.5" horiz cc, 30-90 FPM, #9534

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

6 Stand, Maplewood, with CO Press, out of stock sensor, excellent machine from service, tag #13581

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

6 Stand, Yoder #2"-6, rollformer,31"roll space,2"shaft,Leeson V/S ctrl,5 HP,#7580P

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

6 Stand, Yoder #M1-1/2, 1.5"rollformer,equal gearing,coolant,R to L,#67744 (2)

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

6 Stand, Yoder #M1-1/2", rollformer, 6 heads, 8"roll space, R to L, 5 HP, #72534

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

6 Stand, Yoder, 1.5"shafts, 12"roll space

Roll Form Solutions Inc., Grand Haven, MI 616-638-0407 (Email: steveebel@rollformsolutionsinc.com) Steve Ebel

7 Stand, B & K #RFC-04, rollformer, 1.5" spindle diameter, 6" rollspace, 15 HP, 1978, #11885

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

7 Stand, Dahlstrom #450-7OB, rollformer, 2" shaft diameter, 14" roll space, 10" horizontal center, 15 HP,50-180 FPM, #27831

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

7/11 Stand, Dahlstrom, 3"arbor dia.,28"roll space,22"horiz.,8"-12"vert.,60 HP,#102814

Strong Machinery Corp, Rockford, IL 815-986-8178 (Email: strongmachinery@gmail.com) Starker White

7 Stand, Maplewood, 1-1/4"rollformer & cutoff, 6"roll space, #67742

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

7 Stand, Maplewood opposed model rollformer, 1.25"shaft dia.,6"-36"roll space,#26511

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

7 Stand, Yoder #2-2-1/2, rollformer,3-1/2" x .165"cap.,7 passes,side pass rolls,#71511

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

7 Stand, Yoder #M1.5, 12" W, 16"-20" ID, 4" str, 2"adj., rollforming line, A/C,#156253

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

8 Stand, American Electric Fusion, rollformer / tube mill, #11950

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

8/10 Stand, Ardcor #F10-2-10, rollformer, 2"arbor, 10"roll space, 1984, #71073

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

8 Stand, Ardcor #F10-2-12, 2"arbor,12"roll space,4"-7.25"vert adj.,14"horiz cc, 1980

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

8 Stand, B & K rollformer, 4.5"arbor,24"roll space,9"-14"vertical adjustment,#68927

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

8 Stand, Contour #100-8-6, rollformer & cutoff press, 1" arbor diameter, 2-Axis entry guides, #66536

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

8 Stand, Contour Roll Former, 2" shafts, 12" roll space, 5.5"-8" verticals, 12" horizontals

Roll Form Solutions Inc., Grand Haven, MI 616-638-0407 (Email: steveebel@rollformsolutionsinc.com) Steve Ebel

8 Stand, Dahlstrom #400-8-OB, 1.5" shafts, 10" roll space, 30-125 FPM, #7679

D & H Machinery Inc, Toledo, OH 419-841-3586 (Email: sales@dnhmachinery.com) Sales

8/10 Stand, Dahlstrom #400-8-S-OB, geared head rollformer,1-1/2"arbor,10"roll space

Strong Machinery Corp, Rockford, IL 815-986-8178 (Email: strongmachinery@gmail.com) Starker White

8 Stand, Dahlstrom, 3"arbor diameter x 48"roll space, no drive or controls, Tag #12667

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

8 Stand, Lockformer #L400, AMS MP300 control, Tag #15713

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

8 Stand, Lockformer Triplex rollformer, 1-1/8" arbors, 5 HP, vari-speed, 20 gauge capacity

Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

8 Stand, Michigan, 3.25" shafts, 40" roll space, 15 HP DC motor, #10156

D & H Machinery Inc, Toledo, OH 419-841-3586 (Email: sales@dnhmachinery.com) Sales

8 Stand, PM #PM2.5, rollformer, 2.5" spindle diameter, 18" roll space, 40 HP, entry guide, #65033

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

8 Stand, Rafter, 2-1/2"arbors,16"RS,6-1/2"base to centre of lower spdl arbor,#16055

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

8 Stand, Tishken #8-HW-3S, geared rollformer, 40"roll space, 3"shaft, L ro R, 50 HP, 1983, #7475BHP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

8 Stand, Tishken #8-HW-AS-3, geared rollformer, 22"-36"roll space, 2"shaft, 2003, #7575CHP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

8 Stand, Tishken #8-HW-AS-3, geared rollformer, 30"-40"roll space, 3"shaft, 75 HP, 1993, #7474BHP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

8 Stand, Tishken #8-MHW, 1.5"dia. spdl., 6"roll space, 9"horiz. cc, 7.5 HP, A/C,#10483

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

8 Stand, Tishken #10-HW2-1/2, 2.5"dia. arbor, 10"roll space, 14"horiz. cc,30 HP,#10427

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

8 Stand, Tishken #SHMW1-1/2, rollformer,1-1/2"spdl dia,6"roll space,air clutch,7.5 HP

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

8 Stand, Voest Alpine, heavy duty rollformer, 4.3" spindle diameter, 8 stand profiloe mill, 8 side idler rolls, double turks heads, 130 KW DC drive, 1986 used only 4 yrs

Galaxie Corporation, Wayne, MI 734-727-0600 (Email: machking@galcorp.com) Sales Dept.

8 Stand, Yoder #M1-1/2, rollformer,R-L,1.5"arbor,8"R/S,15 HP,equal geared,#67279

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

8 Stand, Yoder #M-2, rollformer,2"arbor,13"roll space,15 HP,Turkshead,s/n #35122

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

8 Stand, Yoder #M-2, rollformer, 2" arbor diameter, 13" roll space, 15" horizontal centers, entry guide, 15 HP, good

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

8 Stand, Yoder #M-2, rollformer, 2" spindle diameter, 13" roll space, 4"-8" vertical center, 15" horizontal center, variable speed, 15 HP, 1990

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

9 Stand, Dahlstrom rollformer, 30" roll space, 4"adj, 2"diameter rollers, AMS Control, air clutch & brake, #3266

Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

9 Stand, Dahlstrom, 2"dia.spindle, 30"roll space, air clutch, 30 HP, used, #7840

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

9 Stand, Dahlstrom rollformer, 2" arbors, 30" roll space, 24" horizontal center, 4" vertical adjustment, #8173

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

9 Stand, Lockformer Duplex, 9D, 52"W max., motor adj., tooling (3)

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

9 Stand, Maplewood Roll Former, 2-1/2"arbors, U Channel tooling, Tag #15808

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

9 Stand, Pearson gear driven rollformer, 3"shaft,32"roll space,gear box,40 HP,#52767

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

9 Stand, Tishken #9HW-AS-3, geared rollformer, 22"-36"roll space, 2"shaft, 40 HP, 2003, #7575AHP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

9 Stand, Yoder #M-1.5, stations no base, 4 new style & 5 old style unequal geared, 12" roll space

Roll Form Solutions Inc., Grand Haven, MI 616-638-0407 (Email: steveebel@rollformsolutionsinc.com) Steve Ebel

10 Stand, Ardcor #F-15, rollformer, 2"shaft dia.,12"roll space,30 HP,coolant,#71976

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10 Stand, Ardcor #US10RAFT, rollformer,1.5"spdl.dia.,8"roll space,01/1988,#67952

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10 Stand, Ardcor, 1.5"shafts, 10"roll space

Roll Form Solutions Inc., Grand Haven, MI 616-638-0407 (Email: steveebel@rollformsolutionsinc.com) Steve Ebel

10 Stand, Bradbury #130RS, Duplex rollformer,1-1/2"shaft,36"adj.roll space,'90,#65253

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10 Stand, Bradbury #M3, 54"roll space, 3"spindle, 16"horiz centers, 25 HP, #26743

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

10 Stand, Bradbury / Proma #MPU-02, 2"arbors, 8"roll space, 1989, Tag #15841

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

10 Stand, Bradbury Duplex complete rollform line, 20000 lb., 20"-24" ID, 72" OD, L to R, 150 FPM, entry L type coil car, uncoiler with hold down roll, entry pinch rolls, 5 roll straightener, downlayer, exit conveyor

Galaxie Corporation, Wayne, MI 734-727-0600 (Email: machking@galcorp.com) Sales Dept.

10 Stand, Dahlstrom #360-10-OB, 8"RS,1.49"spd,8"horiz,150 FPM VS,w/strghtnr & cut-off

Century Machinery Co, Los Angeles, CA 213-627-2847 (Email: sales@centurymachinery.com) Leon Dietch

10 Stand, Dahlstrom #360/2/10, 1-1/2"shaft dia,5"roll space,100 FPM,s/n #1323,#51467

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10 Stand, Dahlstrom, 1.5"shafts, 8"roll space

Roll Form Solutions Inc., Grand Haven, MI 616-638-0407 (Email: steveebel@rollformsolutionsinc.com) Steve Ebel

10 Stand, Engel, 1.5"spindle diameter, 3.5"roll space, 10"horiz.centers, #3151

Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Email: sales@utubeonline.com) Sales Dept.

10 Stand, Flagler #H-2510, rollformer, excellent

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

10 Stand, Flagler #H-2510 (#20-000), universal roll former, dual sided, 100 FPM, 180 degree HEM tooling, 5 HP, 2015, #10618

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

10 Stand, Flagler, rollformer,5"roll space,1.5"shaft,AB 1336 prog.ctrl,7.5 HP,#7298P

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 Stand, Knudson #J Chanel Rollformer, 12" roll space, 1.5" shaft diameter, #9090HP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 Stand, Lockformer Duplex panel former, 1-1/8"arbor dia.,panel width 8"-72",#102953

Strong Machinery Corp, Rockford, IL 815-986-8178 (Email: strongmachinery@gmail.com) Starker White

10 Stand, Lockformer, 1.25" shafts, #9638

D & H Machinery Inc, Toledo, OH 419-841-3586 (Email: sales@dnhmachinery.com) Sales

10 Stand, Proma #2-1/2MPU-02, rollformer,2.5"shaft dia.,8"roll space,25 HP,1989

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

10 Stand, Rafter #WA4-10, rollformer,2"shaft dia.,5"roll space,11"horizontal center

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

10 Stand, Rafter #WA4-10, 2"arbors, 12"roll space, 1970's, Tag #15842

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

10 Stand, Rafter, rollformer, 2"arbors, 11"horizontal CC, 12"roll space, 20 HP VS drive, Tag #15810

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

10 Stand, Rafter Equipment, Lockformer, #10865

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

10 Stand, Tishken #10-4-1-1, rollformer,5 ton punch press,5 ton cutoff,3.5"RS,#26358

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

10 Stand, Tishken #10-HW-3S, geared rollformer, 40"roll space, 3"shaft, L to R, 50 HP, 1983, #7475AHP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 Stand, Tishken #10-HW-AS-3, geared rollformer, 30"-40"roll space, 3"shaft, R to L, 75 HP, 1993, #7474CHP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 Stand, Tishken #10-HW2-1/2, rollformer, 2.5"spindle dia., 10"roll space, 1969, #69301 (2)

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10 Stand, Tishken #10MW2, 2" spdl dia., 10" roll space, 12" horiz. cc, #10671

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

10 Stand, Tishken #10MW2, 2"dia.shaft, 15"roll space, 12"horiz.cntrs, coolant pump

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

10 Stand, Tishken #110MLW12, 1.5"spindle dia., 6"roll space, 8"horiz.cntrs, #2953

Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Email: sales@utubeonline.com) Sales Dept.

10 stand, Tishken #HMW1.5, rollformer, 1.5" arbor diameter, 10" roll space, #10643

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

10 Stand, Tishken Rollformer, 12" roll space, 2" shaft diameter, 5"-9" vertical & 16" horizontal center

Peterson Machinery Sales, Casa Grande, AZ 231-944-4927 (Email: machine@petersonmachinery.com) Andrew Peterson

10 Stand, Tru-Cut, rollformer, 1-1/2"spindle dia., 8"roll space, L to R, 10 HP

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

10 Stand, Yoder #M-1-1/2, 1.5"arbor dia, 8"roll space, 11"horiz cc, 4"-7"vert adj,'84

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

10 Stand, Yoder #M-2, rollformer,2"spdl dia.,18"roll space,50 HP,entry guides,#71974

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

11 Stand, Knudson #KS-246A, for 3.5" & 5.5" x 16 gauge stud, (2) lines available

CJE Machine, Alpharetta, GA 770-886-6827 (Email: bigern@cjemachine.com) Chris Ernest

11 Stand, Tishken #1-HW-3S, geared rollformer, 40"roll space, 3"shaft, L to R, 50 HP, 1983, #7475CHP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

11 Stand, Turek & Heller, 4.5"shafts,.125"-.375"th,20"roll face & 50"widened,150 HP DC

American Steel Products Co, Toledo, OH 419-843-6051 (Email: ford@americansteel.com) Ford Cauffiel

11 Stand, Yoder, rollformer, 44.5"W x 209.5"L x 63"H, 15 HP, Frame 284T, 1990

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

12 Stand, Ardcor #SF, rollformer,1-1/2"shaft,5-1/2"roll space,right hand,15 HP,#59817

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

12 Stand, Artos #PR-2874, 2.8"shaft dia., 16" horiz cc., 18' lgth, 15 HP, #11396

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

12/18 Stand, B & K #2-1/2B, rollformer,3-1/4"arbor,38"roll space,16:1 ratio,20 HP,#18541

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

12 Stand, B & K, 4.0" shafts, 25" roll space, 100 HP motor, #10478

D & H Machinery Inc, Toledo, OH 419-841-3586 (Email: sales@dnhmachinery.com) Sales

12 Stand, B & K rollformer, 4" spindle diameter, 25" roll space, 40" passline, 100 HP, 1976

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

12 Stand, Bradbury #D-2.5, rollformer, 24" roll space, R-L, 50 HP VFD drive, 1979, #64205

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

12 Stand, Bradbury #RS-35-6-48, rollformer, #5213JVHP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

12 Stand, Clinton #12ST-PKT & Man, rollformer, 1-1/4" spindle diameter, 10-1/2" between centers, 1-1/2" vertical adjustment, #11037

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

12 Stand, Contour #CR-AH-2-12R, 2" rollformer, 20 HP, s/n #85036, 1985, #69320

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

12 Stand, Custom Rollform 4800-12, 1-1/4" arbor, MP300 control, 8" horiz. centers, 11.5" DS, LFV fly cutoff, 7-1/2 HP, 3 over 3 straightener, pneumatic pinch rolls, 1999

Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

12 Stand, Custom Rollform #FS1-6412-18, 1-1/4" arbor, MP300 Control, 8" horiz. centers, 4' vertical centers, 3 over 3 driven straightener, 11.5" DS, LFV fly cutoff, 1993

Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

12 Stand, Dahlstrom #250-12-08, rollformer,1"arbor,8"roll space,5 HP,R to L,#67700

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

12 Stand, Dahlstrom #300-12 OB, 1-1/2" shafts, 4-6" roll diameter, 10" roll space, 11" CC, 40-120 FPM, air clutch

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

12 Stand, Dahlstrom #300-12, 11" centers, 3.87"-6" roll diameter, 1.25" arbor, 8" width, #121082

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

12 Stand, Dahlstrom #300-22OB rollformer, 2" spdl diameter, 24" roll space, R to L, chain driven

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

12 Stand, Dahlstrom #360-12OB, rollformer, 1-1/2"spindle dia., 10"roll space, 8"horizontal center, 4"-5"vertical adj.,#13854J

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

12 Stand, Dahlstrom #360-12OB, rollformer, 1-1/2" spindle diameter, 10" roll space, 10 HP, start/stop, run/jog buttons

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

12 Stand, Dalhstrom #350-12-OB, rollformer, 1.5" spdl dia.,3.5"-4.5" roll dia.,8" roll space,6.5" horiz cc, Airam cutoff

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

12 Stand, Engel Duplex " C" profile, 1-1/4" arbors, 60" max width, 7-1/2 HP, pendant Control

Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

12 Stand, Flagler, (24-stn)1.5"shfts, 9"btwn,oppos.stnds.adj. 0-26"apart

Martin Machine Tool Inc, South Fulton, TN 800-346-3669 (Email: martinmachine@myexcel.com) Christi/Greg

12 Stand, Lockformer duplex panel rollformer, 22 gauge,1-1/4"shaft dia.,6"-36"adjustable roll space,80 FPM,10 HP,1994,#13324J

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

12 Stand, Pearson metal roofing wall panel rollform line, 42" wide, 3" arbors, 100 HP

Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

12 Stand, Rafter, gutter roll former with tooling & pendant control, #13037

N S Machine Corp., Granger, IA 515-999-2999 (Email: sales@nsmachine.com) David Bryan

12 Stand, Roll Form machine Co., 1.500" shafts, 6" roll space, 8" horizontals, 4" verticals

Roll Form Solutions Inc., Grand Haven, MI 616-638-0407 (Email: steveebel@rollformsolutionsinc.com) Steve Ebel

12 Stand, Tishken #12-HW-2-1/2, rollformer, 2-1/2" spdl, 12" roll space, 30HP, R to L, #70948

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

12 Stand, Tishken #12-HW-2-1/2, rollformer,14"roll space,30 HP,equal gearing,#70952

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

12 Stand, Tishken #12-HW-AS-3, geared rollformer, 30"-40"roll space, 3"shaft, R to L, 75 HP, 1993, #7474AHP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

12 Stand, Tishken #12-MW-2, 12" rollspace, 2" arbors, 12" horizontal centers, 7" vertical centers, 30 HP, #12047

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

12 Stand, Tishken #12-MW2, 17" roll space, 2" diameter shafts, coolant pump

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

12 Stand, Tishken #12-MW2, 17"roll space, 2"spindles, 12"horizontal centers

Planet Machinery Co, Livonia, MI 248-957-6439 (Email: planetmachinery@live.com) Ken

12 Stand, Tishken #12-RLW-1, 1"spindle dia., 3.5"roll space, 5"horiz.cntrs, #2955

Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Email: sales@utubeonline.com) Sales Dept.

12 Stand, Tishken #MW-2, 2"dia.shaft, 17"roll space, coolant pump, good,s/n #1058J

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

12 Stand, Tru Cut #1-1/2, 1.5" spdl dia., 12" roll space, 8" horiz cc, 15 HP, #10669

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

12 Stand, Tru Tech rollformer, 1-1/2"spindle,8"roll space,8"horiz cc,3"-5"vert,15 HP

Bass Machinery LLC, Toledo, OH 419-243-2277 (Email: sales@bassmachinery.com) Sales

12 Stand, Yoder #M1-1-Y2-HS, 1-1/2"dia. spdl.,16"roll space,high vertical,30 HP,#67987

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

12 Stand, Yoder #M1-1/2, 1.5" arbor, 8"roll space, 15 HP, rollformer, V/S, #10545

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

12 Stand, Yoder #M1-1/2", rollformer, 1.5" shaft diameter, 15" horiz centers, 4"-7" vert centers

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

12 Stand, Yoder #M2, 2"spdl. dia., 14"roll space, 20 HP, V/S, rollformer, #10527

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

12 Stand, Yoder #M2, 2" spindle diameter, 14" roll space, 4"-8" vertical adj, 15" horizontal centers

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

12 Stand, Yoder #W35, rafted rolllformer line, 4.5"shaft dia., 26"roll space, 32"roll face, 1983, #10523

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

12 Stand, Yoder #W35, rafted rollformer,4-1/2"shaft,26"roll space,R to L,1983,#69879

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

12 Stand, Yoder #W35, rafted rollform line,4-1/2"shaft,26"roll space,R to L,'83,#69878

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

13 Stand, Ardcor #S-F, rollformer, 5-1/2" roll space, 1-1/2" spindle diameter, 15 HP, 1962, #65705

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

13 Stand, Bradbury, 3"arbor dia.,6.5"vert.spacing,18"-24"horiz.spacing,1990,#69558

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

13 Stand, Lockformer, double sided, 6" between stands, V/S, .035 ga. capacity

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Email: Jbrand@mckeanmachinery.com) John Brand

13 Stand, Yoder #CO-3397-1, rollformer with coil line, including reel, straightener/feeder, cut off, S41378

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

14 Stand, ACL #LZJ-HCB, rollforming line,1.5"shaft dia,13.75"roll space,2016,#8448P

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

14 Stand, Ardcor #1F, rollformer, 10" roll space, 1-1/2" spindle diameter, 3/8"-3/16" spindle keyway, 20 HP, 1200 RPM, #10684

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

14 Stand, ASC #Mark-1 Cee / Zee rollformer with 2009 Eave strut rollformer, 9.5"-24"roll width, 2007

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

14 Stand, B & K, complete AG panel line, 38" to 39"finished width

Bass Machinery LLC, Toledo, OH 419-243-2277 (Email: sales@bassmachinery.com) Sales

14 Stand, Bradbury #420, rollforming punching & notching, 12"-36" width, 100 FPM, #9066HP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

14 Stand, Bradbury #QTR42S-22" CEE ZEE, 10 gauge, 4"-24" width, 200 FPM, L to R, 2003

Don Lewis Machinery & Equip, Thousand Oaks, CA 805-427-4287 (Email: don@donlewis.com) Don Lewis

14 Stand, Bradbury, telescoping shaft rollformer, 48 roll space,25 HP,rafted,#64620

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

14 Stand, Bradbury rollformer, 3-1/2" shaft, 48" roll space, 20" horiz space, 200 FPM, 25 HP

Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp

14 Stand, Bradbury rollform line, 3-1/2" shafts, 48" roll space, 18" horizontal centers, 11" vertical adjustment, universal drive mill, mandrel uncoiler, Memco embosser, 4-post flying cut-off, stacker, central hydraulic unit

Galaxie Corporation, Wayne, MI 734-727-0600 (Email: machking@galcorp.com) Sales Dept.

14 Stand, Dahlstrom #360/2-14 Duplex rollformer, 1-1/2" diameter shaft, 12"-30" adjustable \roll space, 15 HP, 1985, #9322

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

14 Stand, Dreistern #P1216-PE101, cantilivered rollformer,2"shafts,8-1/2"R/S,#61607

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

14 Stand, Engel #610-14, rollformer, 2"shaft dia.,10"shaft centers,10 HP,#68996

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

14 Stand, Lockformer Duplex, 72"roll space, 1-1/2"shaft diameter, #25680

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

14 Stand, Lockformer Duplex, 1.25"shaft, 4"roll space, 24 ga.cap., s/n #1401834

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

14 Stand, Lockformer Duplex, 1.25" shafts, 4" roll space, 220/460 V., serial #1401834

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

14 Stand, Lockformer " S" cleat former, 22 gauge, duct connector, 1-1/8" shaft diameter, #27454

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

14 Stand, Lockformer rollformer, 1-1/4"arbor dia., 12"roll space, 5 HP, #68870

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

14 Stand, Lockformer, rollform line,12"roll space,1.5"shaft,AMS ctrl.,3000 lb.uncoiler

Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp

14 Stand, Lockformer / Capacity rollformer mill, 3" shaft diameter, 22" roll space, 200 FPM, 50 HP

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

14 Stand, Pro-Eco #3-1.5-30, rollformer,30"roll,14"horiz.centers,1.5"spdl,50 HP,#10935

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

14/16 Stand, Pro-Eco #3-1.5-30, rollformer,30"roll space,equal geared,50 HP,#58749

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

14 Stand, Pro-Eco #3-15-30, rollformer, serial #2519-2-76, #5460JVHOLLAND

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

14 Stand, Rafter #WA-14HD, rollformer,2-1/8"spindle diameter,12"roll space,start/stop,run/jog buttons,#13739T

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

14 Stand, Rafter, 2.5"spindle diameter, 30"roll space, 13"horizontal cntrs, #3174

Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Email: sales@utubeonline.com) Sales Dept.

14 Stand, Rafter, 2-1/2"arbors,16"RS,6-1/2"base to centre of lower spdl arbor,#16056

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

14 Stand, Tishken, 1-1/2"dia. spdl, 7-1/2"roll space, 8"horizontal centers, #8613

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

14 Stand, Tishken, 1-1/2" spindle, 7.5" roll space, 8" horiz., 4" to 5-5/16" vert.

Bass Machinery LLC, Toledo, OH 419-243-2277 (Email: sales@bassmachinery.com) Sales

14 Stand, Yoder / Lockformer, rollforming line, 4000 lb., 18" width, 72" outside dimension, 3" stroke, 13.5" die space, #BL7885

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Email: Jbrand@mckeanmachinery.com) John Brand

14 Stand, Yoder rollformer, 20 stands,11"roll space,6"horiz. center,4"vert. center,#68376

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

15 Stand, Bradbury #MCE2.5-60-16, 3"arbor dia.,5.5"vert.4"horiz.spacing,1991,#69559

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

15 Stand, Hayes / Bradbury #SLR, rollformer, uncoil,leveler/cutoff, 2003, #47942

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

15 Stand, Marion, 26 ga.,43"R/S,2.5"arbor dia,tooling for (2) profiles,VFD,#13044

N S Machine Corp., Granger, IA 515-999-2999 (Email: sales@nsmachine.com) David Bryan

15 Stand, Samco rollformer, 2.5"shaft,10"roll space,center drive,40 HP,1997,#63669

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

15 Stand, Vargus #1-1/2-30, rollformer, #5464JVHOLLAND

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

15 Stand, Vargus, rollformer,30"roll space,1-1/2"arbor,14"horiz.centers,20 HP,#10933

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

15 Stand, Vargus rollformer, 30"roll space,1-1/2"arbor,14"horiz.centers,20 HP,#58754

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

15 Stand, Yoder #M1-1/2, rollformer, #59332

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

15 Stand, Yoder, 1.5" spindle diameter, 18" rollspace, 18" horizontal centers, 4"-9" vertical adj., 1960, #10867

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

16 Stand, Ardcor rollformer, 2"spdl,20"roll space,10"horiz cc,3-3/4"-5-5/8"vert,20 HP

Bass Machinery LLC, Toledo, OH 419-243-2277 (Email: sales@bassmachinery.com) Sales

16 Stand, B & K #11/2B, 2"dia.spindle, 20"roll space, air clutch, 25 HP, 1970

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

16 Stand (2-8 Stand), Bradbury, retrofit R/F,3"spdl dia.,36"roll space,'99,#72130

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

16 Stand, Bradbury, 2.5" arbor, 2.5"roll dia., rafted rollformer, 12" horiz. cc, 8.875"vert. cc, #10542

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

16 Stand, Bradbury, 37" roll space, gear driven, 3" shafts, 50 HP variable speed, coil reel, complete, 1980' s

Peterson Machinery Sales, Casa Grande, AZ 231-944-4927 (Email: machine@petersonmachinery.com) Andrew Peterson

16 Stand, Bradbury, 18 rafted stands, 1.5"shafts, 18"roll space, 4"-5.5"vertical,1991

Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

16 Stand, Bradbury rollform line,1.5 rafted,16 passes,18"RS,extra rafts,4"-5.5"vrt.adj.,1991

Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp

16 Stand, Lockformer #L-16 Duplex, 16 stands, 1.75"arbors, 55"panel width, 1987, #102319

Strong Machinery Corp, Rockford, IL 815-986-8178 (Email: strongmachinery@gmail.com) Starker White

16 Stand, Metalform, 3" roll shaft diameter, 36" roll space, 30" horizontal centers, 40HP, #53285

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

16 Stand, Pro-Eco #1-1/2-24, rollformer, serial #1267-9, #5481JVHOLLAND

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

16 Stand, Pro-Eco, rollformer,30"roll,1-1/2"arbor,14"horiz.centers,6"spdl,75 HP,#10932

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

16 Stand, Pro-Eco rollformer, 30" roll space, equal geared, top roller driven, #58773

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

16 Stand, RLM rollform mill, 2 sections, 8 stands each, 3" spindle diameter, 20" roll space, 24" horizontal center, 6"-12" vertical adjustment, 150 HP, S38630

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

16 Stand, SK 48" x4" arbors, 30 HP, AMS controls, Flying cut-off, tooled for panels or siding

Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

16 Stand, Tishken #16-HMW-1-3/4, geared rollformer,1.75"shaft,12"roll space,'72,#7845P

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

16 Stand, Tishken #16-HW-2-1/2, rollformer, 16" roll space, 2.5" spindle diameter, 14" horizontal centers, 6.5"- 8.375" vertical adj., 1982, #10874

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

16 Stand, Tishken #16-MW-2, rollformer, 14" rollspace, 2" spdl diameter, air cooled, 1956, #10576

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

16 Stand, Tishken #16HMW, 1.75"spindle dia., 10"roll space, 9"horiz.cntr, #2860

Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Email: sales@utubeonline.com) Sales Dept.

16 Stand, Tishken #16MLW1-1/2, rollformer, 1-1/2" spindle diameter, 8" roll space, variable speed, #65878

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

16 Stand, Tru Tech, double sided rollformer, 1-1/2" spdl, 8" roll space, 8" horizontal, 4" to 6" vertical

Bass Machinery LLC, Toledo, OH 419-243-2277 (Email: sales@bassmachinery.com) Sales

16 Stand, Van Huffel, 1.5"dia arbor, 30 HP, 210 FPM, rollformer, 6"dia arbor roll space, #10499

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

16 Stand, Yoder #M-1-1/2, rollformer,1.75"shaft dia.,8"roll space,coolant,#63920

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

16 Stand, Yoder, 54" building panel rollforming line w/embosser, complete re-install included

Peterson Machinery Sales, Casa Grande, AZ 231-944-4927 (Email: machine@petersonmachinery.com) Andrew Peterson

17 Stand, McKay /Bradbury, 5-1/2"arbor dia, 42"roll space, 125 HP DC, #64621

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

17 Stand, Samco Truss Rollforming Line,16"roll space,2.5"shaft dia,40 HP,250 FPM,2005

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

18 Stand, ASC #A.S., rollformer,2-3/4"shaft,36"roll space,vari-speed drive,'71,#57507

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

18 Stand, ASC #A.S., rollformer, 2.75" shaft diameter, 36" roll space, 1.75" vertical, 10.5" horizontal center, wet gear drive, variable speed drive, remote hand control

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

18 Stand, ASC #A.S., rollformer,2-3/4"shaft,36"roll space,vari-speed drive,'71,#10945

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

18 Stand, ASC #DUP-4-8-18, duplex, 18-1/8" to 44'wide pwr adj.,2"shafts,10 HP,#4481

Diamond Jack Machinery Inc, Fort Smith, AR 479-785-2554 (Email: djm@diamondjackmachinery.com) Jack Yancey

18 Stand, ASC, 36"roll space, 2-3/4"shaft, 10-1/2"horizontal center, 1971, #4696JVHP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

18 Stand, B & K #2-1/2B, 3.25"spdl dia., 6.5"-9.75"vert. adj., rollformer,1965,#10043

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

18 Stand, B & K #2B-1A-71, rollformer,51"roll space,3.25"shaft @ 16"spacing,50 HP,no tlg.

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

18 Stand, Bradbury #130-3.1/4-18, duplex,dual hd,1.5"arbor,14.5-48"space,1987,#13380

N S Machine Corp., Granger, IA 515-999-2999 (Email: sales@nsmachine.com) David Bryan

18 Stand, Bradbury #D2-RF, 36"roll space, 2.5"dia.shafts, good condition, s/n #9860

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

18 Stand, Bradbury #D2-RF, 2.5" spdl. dia., 36" roll space, 5.5"-9" vert adj.,#10427

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

18 Stand, Bradbury, dual head roll forming line, 1-1/2" x 40"

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

18 Stand, CMC, rollformer,32"roll space,2"dia.shafts,18"horiz. centers,40 HP,good

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

18 Stand, Dahlstrom #360-18-OB, 1-3/4"arbors, 26"roll space, 1998, tag #15059

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

18 Stand, Dahlstrom #360-18-OB, 26"roll space,1.75"shaft,Pendant ctrl,1998,#1490

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

18 Stand, Tru-Tech #T-200, 2"spdl dia.,12"roll space, 10"horz. center, A-B ctrl.,2007

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

18 Stand, Yoder #M1-1/2, rollformer, 10"roll space, 4"-7"vert center, R to L, #72174

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

19 Stand, Maplewood Duplex, rollformer, 20"-46"x 1 3/4",exit guides,20 HP,#5893JVP

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

19 Stand, Tishken #20-MW-2, rollofmer with coil reel, welder & cut off press, 2" spindle diameter, 17.5" roll spacing, 12" horizontal centers, 2.5" vertical adjustment, 50 HP, S41384

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

20 Stand, ASC #20HM-3-1/2, rollformer, 3.5" shaft diameter, 42" roll space, L to R, 40 HP, enctry guide

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

20 Stand, Bradbury #DW3.5-12-20, rollformer, 1988, #7661

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

20 Stand, Contour #CR-A-H-2-20R, 2" spindle diameter, 12" roll space, 20-150 RPM, 40 HP, 5"- 7-7/8" vertical, 12" horizontal center

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

20 Stand, Max-Roll, 1-1/2"spdl,11"roll space,9"horz.center,2-1/2"vert.adj.,#2996

Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Email: sales@utubeonline.com) Sales Dept.

20 Stand, Pro-Eco #FGL5-6, Duplex panel forming machine,30" x 26 ga.cap,25 HP,#52718

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

20 Stand, Tishken #10-MW-2, rollformer,(2) 10 stand bases,2"spindle dia.,8.5"roll space,12"horizontal center,#13870T

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

20 Stand, Tishken #12-HMW-1-1/2, rollformer, 1.5" spindle diameter, 7.9" roll space, 9" horizontal center, 1.75" vertical adjustment, R to L, S39327

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

20 Stand, Tishken #20HW-AS-3, 22"-36"RS, 2"spindle, heavy wall, 2003, #7575HP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

20 Stand, Tru Tech rollformer, approx 13" roll space, 8" horiz.centers, 5" vert.centers, #68375

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

21 Stand, Omega Design Rollformer, 26" roll space, 2-7/8" shaft diameter, 6" vertical & 12"/24" horizontal center

Peterson Machinery Sales, Casa Grande, AZ 231-944-4927 (Email: machine@petersonmachinery.com) Andrew Peterson

21 Stand, PM Machine Tool rollformer, 4-1/2"arbor,60"roll space,egual gearing,#70354

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

21 Stand, Yoder #C05231, rollformer, 2" roll diameter, 13" roll space, 50 HP, R to L, S38634

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

22 Stand, Ardcor #F-15-4-57, rollformer,4"arbor,57"roll space,equal gearing,#59900

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

22 Stand, Bradbury #425DW-22-12, 24"roll space, 6.25"vert. cc, 24"horiz cc, #53462

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

22 Stand, Proma #RF-1-1/2-22, rollformer,2"spdl dia.,36"roll space,1986,#55510

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

22 Stand, Tru-Tech #2002R, 24"roll space, 2"spindles, R to L, 1989

Planet Machinery Co, Livonia, MI 248-957-6439 (Email: planetmachinery@live.com) Ken

22 Stand, Tru-Tech rollformer, 2"spdl,24"roll space,5"to 7" +1 vert,15"horiz,40 HP

Bass Machinery LLC, Toledo, OH 419-243-2277 (Email: sales@bassmachinery.com) Sales

23 Stand, Ardcor rollformer, 2-1/2"spdl dia,33"R/S,4"- 5-1/2"vert,10"horiz,40 HP

Bass Machinery LLC, Toledo, OH 419-243-2277 (Email: sales@bassmachinery.com) Sales

23 Stand, Yoder rollformer, 2" roll diameter, 13" roll space, R to L, 50 HP, 1980, S38635

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

24 Stand, Ardcor #S10-2-1/2-33, 2.5"shaft, 33"roll space, 10"centers

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

24 Stand, Ardcor, rollformer, 75 HP, 1800 RPM, 62" roll space, 4" spindle diameter

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

24 Stand, ASC, rollformer,4"arbor,60"roll,14"hoirz.centers,7-1/2"spindle,#10937

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

24 Stand, ASC, rollforming line,4"shaft dia.,60"roll space,20'conveyor run-out,#6046JV

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

24 Stand, ASC rollforming line, 4"shaft,60"roll space,14"horizontal centers,#58566

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

24 Stand, B & K #2B-1A-71, rollformer,51"roll space,3.25"shaft @ 16"spacing,50 HP,tlg.

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

24 Stand, Bradbury #MCE21/2-24-48, rollformer,3.25"shaft,52"mandrel,50 HP,no tlg,1996

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

24 Stand, Dahlstrom #400-24UD, 2"arbor,18"W roll,15.75"horiz. cc, 4"-9"roll pitch dia.

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

24 Stand, Dahlstrom #400-24UD, rafted U-joint drive rollformer with 24 additional rafted heads, 2" arbor diameter, 18" roll width, 15-3/4" horizontal centers, 4"-9" vertical adjustment, 10-40 FPM, 20 HP

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

24 Stand, Tishken #12HW-2-1/2, rollformer, 14" rollspace, 2.5" spdl diameter, 1991, #10872

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

24 Stand, Tishken #24-HWAS-3, 3" spdl dia., 30"-40" roll space, 6.5"-8.75" vert. adj, 14" horiz cc, rollformer, 1991, #7267

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

24 Stand, Tishken #24-MW-2, rollformer,2"arbor,18"roll,12"horiz.centers,2000,#10879

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

24 Stand, Tishken #24-MW-2, 18"RS, 2"shaft dia., Equal Gearing, 40 HP, 2000, #7484P

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

24 Stand, Tishken #24-MW-3, rollformer,3"spdl dia.,36"roll space,50 HP,1984,#67538

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

24 Stand, Tishken #MW2-1/2, rollformer,2.5"spdl dia,28"roll space,30 HP,A/C,#66886

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

26 Stand, Ardcor #1-1/2-FU, 75 HP, 1:1 gear ratio, 62" roll space, 4" spindle diameter, 1963

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

26 Stand, Tishken #26HW-3, rollformer, 3" arbor diameter, 14" roll space, 14" horiz centers, #72239

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

28/26 Stand, Bradbury, rafted rollformer,2"spindle,18"roll space,18"horiz.cc,#66502

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

28/30 Stand, Dreistern #P915-P1815, rafted type U joint drive rollformer, 1986, #61598

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

28 Stand, Tishken #28-HW-3S, geared rollformer,3"shaft dia.,40"roll space,1986,#7476HP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

28 Stand, Tishken #28-HW-3S, 40"RS,3"spdl,unequaled gearing,heavy wall,1983,#7475HP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

28 Stand, Tishken #28-HW-AS-3, duplex,3"dia. spindle,30"-40"roll space, vari-speed,75 HP,1996

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

28 Stand, Tishken #28HW-AS-3 Duplex Roll Form, 28 pairs spindles, 3"dia, 1996

520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

28 Stand, Tishken duplex rollformer, 3"spindle dia.,30"-40"roll space,75 HP,1996

Midwest Machinery LLC, W Bloomfield, MI 248-626-0200 (Email: sales@midwestmachy.com) Mike Rybak

30 Stand, Tishken #32-HW-AS-3, 30"-40" roll space, 3" spindle, heavy wall, rebuilt 2003, #7474HP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

30 Stand, Yoder, rollform line, 20000 lb., 36" W, 60" OD, 2014, #10877

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

32 Stand, Contour #1532AOSLCE, rafted rollformer,2.5"arbor dia.,40"R/S,1996,#69083

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

32 Stand, Pearson / Tru Cut rollformer, 2" spindle diameter, 20" roll space, R to L, S39318

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

32 Stand, Tishken #32-XHW-4, 4-1/2"spdl,70"RS,Quantum III digital DC dr,'97,#55271

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

32 Stand, Tishken #32-XHW-4, 4.5"spdl.,70"roll space,18"horiz cc, 8"-11"vert cc,1997

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

32 Stand, Tishken #32-XHW-4, 70"roll space,4-1/2"shaft,100 HP,1997,#4230JVToledo

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

32 Stand, Tishken #32-XHW-4-1/2, 70"roll space, 4-1/2"spindles, Qunatum III, 1997

Planet Machinery Co, Livonia, MI 248-957-6439 (Email: planetmachinery@live.com) Ken

72 Stand, Dreistern #PPROF.125.20, 2"dia.shaft, 14"roll space, s/n #01-006, 2001

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

Ardcor, 1.500" shafts, 20 station

Roll Form Solutions Inc., Grand Haven, MI 616-638-0407 (Email: steveebel@rollformsolutionsinc.com) Steve Ebel

Bradbury rollformer stands

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Bradbury rafted rollformer, 16 pass, 2-1/4" spindle, 12" roll space, 18" horizontal center, 4-7/8" - 8-7/8" vertical adjustment

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Rutland #PBR-Panel roofing rollformer, 26 gauge, 20 stations, programmable control, computer batching oin inches, hydraulic shear, E-stops on both sides, low hours

Bud's Machine Tools, Murray, UT 385-271-6718 (Email: megan@budsequipment.com) Megan Poulsen

Yoder #M-2-1/2, (6) gear boxes, spindles & outboards, 2.5" spindle diameter, 15" roll space, 5"-10" vertical adj., #10952

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

Floor Joist roll forming system, 48" x 14 gauge, 42' conveyor, straightener, shear, control system, 4"-14" joist, 1-5/8" leg, 3/8" return

Galaxie Corporation, Wayne, MI 734-727-0600 (Email: machking@galcorp.com) Sales Dept.

Back to Machinery & Machine Tool listings.

= photo available Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller Video

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search