Browse:  Machinery Electrical
RSS Twitter Facebook Linkedin Instagram Blog Surplus Record

PUMPS:
VACUUM PUMPS

, Airvac Technical Services, Nash Vaccum Pumps
There are 248 listings in this category
Update: Sat, Oct 24, 2020 00:37:46
Advanced Search
Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added
 
 
Original Sort

1 CFM @ .1 micron, Welch #1400, vacuum pump, 2 stage, with motor (4 available)

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

1 CFM, Leybold #MDLD16A, vacuum pump, 1" inlet & outlet, 1 HP, 115/200/230 V.

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

1.5 CFM @ 20" Hg., Gast #0740-V3, vacuum pump, driven by air motor, on base

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

3.2 CFM @ .1 micron, Welch #1405, vacuum pump, 2 stage, on base, with motor

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

4 CFM, Robinair #Vacumaster-15400, High Performance Vacuum Pump, ISO-Vane, #8344HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

7 CFM @ 10" micron, Alcatel #2008-A, vacuum pump, 2 stage oil seal, 1/2 HP, 1725 RPM

 
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

15 CFM, Graham, #1V52200 XXX, liquid ring, 22 BHP, 25 HP, 1750 RPM, skid mounted, (2) 2" inlet/outlet

  Photo Spec Sheet
 RFQ
Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

20 SCFM, 25.4-63mm HGA, Graham #1PV8255/FNZ, liquid ring gas high vacuum pump, 2 stage, 65 GPM (3)

  Photo
 RFQ
Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

20 CFM, Graham #1PV8255/FNZ, Liquid Ring Gas High Vacuum Pump, 2 Stage

  Photo
 RFQ
Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

30 CFM @ 10" micron, Stokes #146-13 Microvac vacuum pump, 1.5 HP, belt guards

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

30 CFM @ 26" Hg., Nash #AT-34, 2-stage liquid ring vacuum pump, 3 HP, mounted on base (2 available)

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

33 CFM, Leybold Hereaus Trivac Type #D40-BCS, vacuum pump with Ruvac blower, skid mounted

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

40 CFM @ 27" Hg., Kinney #KLRC-40KFA, liquid ring vacuum pump, Cast iron, 316L Stainless Steel

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

40 CFM @ 27" Hg., Kinney #KLRC-40S, liquid ring vacuum pump, Cast iron, Stainless Steel, 5 HP (4 available)

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

53 CFM @ 27" Hg., Shinko #SW-100AS,liquid ring,stainless,7.5hp,208-240 V/3,tank

  Photo
 RFQ
Quintronix, Hayward, CA 510-786-0439 (Email: dale@quintronix.com) Dale Quinn

56 CFM @ 28" Hg., Rietschle #CLFE-81-10, rotary vane oil seal vacuum pump, air cooled

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

58 CFM @ .075" Torr, Busch #NC0070A, Carbon Steel single stage cobra dry screw vacuum pump, air cooled, 5 HP, 3505 RPM, 460 V.

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

60 CFM @ 29" Hg., Ingersoll-Rand #30T-V255, portable vacuum sump pump, 5 HP, #9058JVHP

  Photo
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

63 CFM @ 29.3" Hg., Busch #RCO-100, rotary vane oil seal vacuum pump, tank mounted, air cooled

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

63 CFM, Busch w/(2) #RCO100-E50-6-1003,120 gal.receiver,Natl.brd,1997

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
LR Environmental Equip Co, Los Angeles, CA 323-770-0634 (Email: sales@lre.com) Gary Fleck

66.6 CFM, Dekker #DVW0453KF1-20, 316 Stainless Steel vacuum system package, 25 HP, 1750 RPM, 460 V.

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

75 cfm @ 80 psi, Nash AD-73, vacuum pump / compressor, 3550 RPM

  Photo
 Visit Dealer's Equipment Listings  RFQ
U S Combustion Products Inc, Ketchum, ID 208-725-5781 (Email: s.backstatter@uscombustion.com) S.Backstatter

80 CFM, Stokes #149-H-11 Microvac vacuum pump with motor

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

100-1400 CFM, Leybold #WA/WSU, roots type blower, 208-240 V/3, Used

 
 RFQ
Quintronix, Hayward, CA 510-786-0439 (Email: dale@quintronix.com) Dale Quinn

110 CFM @ 28.8" Hg., Kinney #KLRC-200-KFA, liquid ring vacuum pump, bare pump, for parts

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

110 CFM, Rietschle, vacuum pump, 10 HP, 230/460 V.

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

113 CFM @ .5" Hg., Rietschle #BWZ162-15, rotary vane vacuum pump, 10 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

113 CFM, Rietschle #VWZ162(15), vacuum pump, 10 HP, 1800 RPM, 2" x 2.5" flanged connections

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

113 CFM, Rietschle #VWZ162, vacuum pump, 3/10 HP, 1800 RPM

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

117 CFM, Busch Huckepack #433014, dry running vacuum pump, 15 HP, 1170 RPM, 230/460 V., 1993

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

117 CFM @ .5 Torr, Busch, vacuum pump, 7.5 HP, 1500 RPM

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

120 CFM, Leybold #DK-180, vacuum pump, 2-stage, 3 ph.,220/440 V.

  Photo
 RFQ
Quintronix, Hayward, CA 510-786-0439 (Email: dale@quintronix.com) Dale Quinn

124 CFM, Busch #AC0200AD21XXZZC Cobra vacuum pump, 7.5 HP925-2890 RPM, 415 V.

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

130 CFM, Kinney #KDH-130, vacuum pump with motor base & separator (2- Units in stock)

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

150 CFM @ 10" microns, Stokes #212-H-11 Microvac vacuum pump, 7.5 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

150 CFM @ 26" Hg., Nash #SC2/7, single stage liquid ring vacuum pump, 10 HP, never used

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

150 CFM, 29" Hg, Travaini #EVO-10, sgl stage oil sealed air cooled vacuum pump,10 HP

  Photo
 Visit Dealer's Equipment Listings  RFQ
Plastimach Corp., Valley Cottage, NY 800-394-1128 (Email: plastimach@plastimach.com) Robert Rosen

150 CFM, Kinney #KDH-150, vacuum pump with motor base & separator (2- Units in stock)

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

150 cfm, Stokes #212-11, Ser.#83510

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Furnace Brokers International, Tolland, CT 860-875-3712 (Email: jtbouley@aol.com) John Bouley

160 CFM @ 18" Hg., Vooner #LR2-2, Liquid Ring Vacuum Pump, 1750 RPM, #34655

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

160 CFM, 24" Hg, Becker #VTLF 2.250, vacuum pump, 9 HP, factory new with warranty, #16428

  Photo
 Visit Dealer's Equipment Listings  RFQ
Plastimach Corp., Valley Cottage, NY 800-394-1128 (Email: plastimach@plastimach.com) Robert Rosen

173 CFM, 29.9' Hg, Becker U Series Vacuum Pump #U 4.250, 10 HP,new,#16883

  Photo
 Visit Dealer's Equipment Listings  RFQ
Plastimach Corp., Valley Cottage, NY 800-394-1128 (Email: plastimach@plastimach.com) Robert Rosen

177 CFM, Busch #MM1252AVV6.11XX, vacuum pump, 7.5 HP, stacked frame mounted, 2007 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

182 CFM, Becker, air/vacuum pump + compressed air, 3300 RPM, 2.1 psi, 230/460 V.

 
 RFQ
Graphic Litho Inc, Lawrence, MA 978-683-2766 (Email: rewilbur@graphiclitho.com) Ralph Wilbur

200 CFM @ 28" Hg., Nash #TCM-2, 2-stage, all 316SS construction

 
 RFQ
Airvac Technical Services Inc, Bethel, CT 203-300-1199 (Email: nilandg@aol.com) Gary Niland

200 ACFM, Kinney #KLRC-200S, 2 stage liquid ring vacuum pump, Carbon Steel, 2" inlet/outlet, 15 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

225 ACFM @ .0075 Torr, Busch #NC0300 Cobra vacuum system, water cooled twin screw design pump, skid mounting, 15 HP, 3510 RPM, 230/460 V.

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

270 CFM @ 15" Hg., Ingersoll-Rand #AX1-VAC-20, like new (3)

 
 RFQ
Pump & Motor Works, Okmulgee, OK 918-752-0309 (Email: sales@pmwus.com) Sales

280 CFM, Dekker Duravane #RVL 300HH-03, vacuum pump, 15 HP, 1800 RPM, 2007

  Photo
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

300 CFM, Kinney #KLRC-300-KFA, liquid ring vacuum pump, 25 HP, 230/460 V.

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

310 CFM, Beach-Russ #RP250D, s/n #76711, low speed belt drive for longevity

 
 RFQ
Metallurgical High Vacuum, Fennville, MI 269-543-4291 (Email: darel-r@methivac.com) G. Humberstone

350 CFM @ 28" Hg., Nash #TC-5, 2-stage, all 316SS construction

 
 RFQ
Airvac Technical Services Inc, Bethel, CT 203-300-1199 (Email: nilandg@aol.com) Gary Niland

365 CFM, Quincy #QSV25, 25 HP,W/C,460 V.,4286/4771 hrs,2001 total of (2)

 
 RFQ
Wenniger Compressor Co, Milwaukee, WI 414-372-5320 (Email: cliffw@wennigercompressor.com) Cliff Wenniger

388 CFM, Elmo Rietschle #VC-500, Vacfox, 20 HP, Denver Gardner, 240/480 V. (3 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Process Industrial Surplus Corp, Englewood, CO 303-597-8773 (Email: sales@indbid.com) Mark Stephenson

400 CFM @ 24" Hg., Nash #CL-402, 403, vacuum pump, rebuilt w/warranty

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

400 CFM, Nash #CL-402, CL-403, all 316SS construction

 
 RFQ
Airvac Technical Services Inc, Bethel, CT 203-300-1199 (Email: nilandg@aol.com) Gary Niland

400 CFM, Nash #XL35/9, vacuum pump, size 2 x 2, 30 HP, 1750 RPM, test #O8D0147, unused

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

400 CFM, Nash SC-4, all 316SS construction

 
 RFQ
Airvac Technical Services Inc, Bethel, CT 203-300-1199 (Email: nilandg@aol.com) Gary Niland

420 ACFM, 25" Hg., Travaini #TRHC80-600C/RX, 2-stage liquid ring vacuum pump, EPFC, 50HP

  Photo
 RFQ
Harvest Energy Inc, Grand Rapids, MI 616-450-7769 (Email: james.edwards@harvestenergyinc.com) James Edwards

500 CFM @ 27" Hg, Travaini #TRO500S-1A, vacuum pump, 40 HP, 10340 hours, 2006

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

550 ACFM, 10" HgV., Quincy #QSVI-40, 40 HP, rotary screw vacuum pump, 1997, #10498

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

590 CFM @ .075 Torr, Busch Cobra #NC1000BL01, dry screw vacuum pump, 33.5 HP, 3530 RPM, 220 V.

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

600 CFM @ 28" Hg., Nash #TC-7, 2-stage, all 316SS construction

 
 RFQ
Airvac Technical Services Inc, Bethel, CT 203-300-1199 (Email: nilandg@aol.com) Gary Niland

600 CFM, EC & G Ametek #Rotron 15 HP regenerative blower vacuum pump, 3450 RPM, motor rebuilt

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

700 CFM @ 24" Hg., Nash #CL-702, 703, vacuum pump, rebuilt w/warranty

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

700 CFM, Nash #CL-702, CL-703, all 316SS construction

 
 RFQ
Airvac Technical Services Inc, Bethel, CT 203-300-1199 (Email: nilandg@aol.com) Gary Niland

700 CFM, Stokes #212-H-11 vacuum pump/blower system

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

750 CFM, Nash #SC-6, all 316SS construction

 
 RFQ
Airvac Technical Services Inc, Bethel, CT 203-300-1199 (Email: nilandg@aol.com) Gary Niland

800 CFM, Nash #XL150/5, liquid ring vacuum pump, 6 x 4, 316 Stainless Steel, 100 HP, 1170 RPM, unused, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

823 CFM, Sihi #LPHY-75330, 2 stage water seal vacuum pump system, 50 HP, 1770 RPM, 230/460 V., skid mounted

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

1000 CFM @ 24" Hg., Nash #CL-1002, 1001, 1003, vacuum pump, rebuilt w/warranty

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

1000 CFM @ 28" Hg, Thune #L.NO.1720, SS, 75 HP, #1271666 (2)

  Photo
 Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay

1000 -2000 CFM, Nash Siemens Elmo #2BE1253-OBY2-Z, 2004 (4 available)

  Photo
 Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, Plymouth, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman

1000 CFM, Nash #CL-1002, CL-1003, all 316SS construction

  Photo
 RFQ
Airvac Technical Services Inc, Bethel, CT 203-300-1199 (Email: nilandg@aol.com) Gary Niland

1000 CFM, Nash #SC-7, all 316SS construction

 
 RFQ
Airvac Technical Services Inc, Bethel, CT 203-300-1199 (Email: nilandg@aol.com) Gary Niland

1200 CFM, Ametek #DRP15BQ72D, blower / vacuum pump, 240/480 V., 3-phase, #11523

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

1300 CFM Stokes #1721, Roots #615 blower, 212H-10, mechanical, rebuilt

  Photo
 RFQ
Quintronix, Hayward, CA 510-786-0439 (Email: dale@quintronix.com) Dale Quinn

2000 CFM @ 10" Hg., Nash #CL-2001, vacuum pump, remanufactured 2010

  Photo
 Visit Dealer's Equipment Listings  RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

2000 CFM @ 13.9" Hg., Bingham #6G-L, Vacuum Pump, S/S Casing, Rebuilt Storeroom Spare, #40787

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

2000 CFM @ 24" Hg., Nash #CL-2002, SS

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

2000 CFM @ 24" Hg., Nash #CL-2002, 2001, 2003, vacuum pump, rebuilt w/warranty

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

2000 CFM, Nash #CL-2002, CL-2003, all 316SS construction

  Photo
 RFQ
Airvac Technical Services Inc, Bethel, CT 203-300-1199 (Email: nilandg@aol.com) Gary Niland

2000 CFM, Nash #CL2002 DI, remanufacturered DI

  Photo PDF icon
 RFQ
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Email: subpump@aol.com) Linda/ Frank

2000 CFM, Nash #CL2002 DI, remanufacturered DI

 
 RFQ
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Email: subpump@aol.com) Linda/ Frank

2000 CFM, Nash #CL2002, vacuum pump, liquid ring, 150 HP

  Photo
 Visit Dealer's Equipment Listings  RFQ
Special Projects Int'l, Inc., Louisville, KY 502-778-3883 (Email: cmiller@specialprojects.com) Chris Miller

2000 CFM, Vooner #LR20BV-1, Vacuum Pump, S/S rotor, S/S cones, 640 RPM, 1988, #24136

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

2850 CFM @ 23" Hg., Nash #CL-3003, liquid ring vacuum pump, 200 HP, 500 RPM, refurbished 2004

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

2850 CFM, Nash #CL3003, vacuum pump, liquid ring, spare rebuilt by Nash Elmo

  Photo
 Visit Dealer's Equipment Listings  RFQ
Special Projects Int'l, Inc., Louisville, KY 502-778-3883 (Email: cmiller@specialprojects.com) Chris Miller

3000 CFM @ 24" Hg., Nash #CL-3002, stainless steel

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

3000 CFM @ 24" Hg., Nash #CL-3002, 3001, 3002, vacuum pump, rebuilt w/warranty

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

3480 CFM, Stokes #212-J, vacuum pump/blower package, skid mounted on base, 2006 (3 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

3480 CFM, Stokes vacuum pump/blower package, Stokes 212-J with 622 blower (3)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

4000 CFM @ 24" Hg., Nash #CL-4002, 4003, vacuum pump, rebuilt w/warranty

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

4000 CFM, Somarakis #3633, Vacuum Pump, #33051

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

4000 CFM, Somarakis #87V127, Vacuum Pump, S/S Casing, Iron Heads, Steel shaft, Iron rotor, #39824

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

6000 CFM @ 24" Hg., Nash #CL-6002, 6001, 6003, vacuum pump, SS internals

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

6000 CFM @ 25" Hg., Nash #CL6001,6002,Or 6003,CI or SS clad,as is or reblt.w/wrrty.

 
 RFQ
Transamerican Equip Co LLC, Tuscaloosa, AL 205-454-8184 (Email: sales@tecequip.net) Ralfe Hickman

6000 CFM, Nash #CL-6002G, Vacuum Pump, 324 RPM, #19376

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

9000 CFM @ 24" Hg., Nash #CL9002, 9001, 9003, vacuum pump, rebuilt w/warranty

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

9000 CFM @ 25" Hg., Nash #CL9001,9002,9003,CL9000G,CI or SS clad,as is or reblt.

 
 RFQ
Transamerican Equip Co LLC, Tuscaloosa, AL 205-454-8184 (Email: sales@tecequip.net) Ralfe Hickman

14000 CFM, Nash #CL-14002, 14001, Vacuum Pump, Rebuilt w/Warranty

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

16000 cfm, Siemens #1706, vacuum pumps (2)

 
 RFQ
Peak Machinery Inc, Blaine, MN 612-810-1955 (Email: randy@peakmachinery.com) Randy Bayless

17000 CFM, Nash #2BE3720, Stainless Steel vacuum pump, no motor, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

59000 CFM, Varian #NHS-35, diffusion pump, remanufactured, 480 V., 3 ph, ASA flanges

 
 RFQ
Metallurgical High Vacuum, Fennville, MI 269-543-4291 (Email: darel-r@methivac.com) G. Humberstone

26.5" Hg, Gast #2567-V108, oil-less dsgn,1.5 HP,0.75"inlet & outlet,CSA Standard,#2617

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Icon Industries, Inc, Grand Rapids, MI 616-241-1877 (Email: sales@iconindustries.com) Tom,Pete,Bob

Becker #U4100SA/K, vacuum pump, 2013 (3 available)

  Photo
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Becker #VTLF-250SK, 10 HP, 2002

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Plastimach Corp., Valley Cottage, NY 800-394-1128 (Email: plastimach@plastimach.com) Robert Rosen

Busch #LB3008, liquid ring gas high vacuum pump, 2 stage, remanufactured by Armstrong Pump & Service

  Photo Spec Sheet
 RFQ
Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

Busch #LB3008A-AVB-XX-IX, liquid ring gas high vacuum pump, 2 stage

  Photo Spec Sheet
 RFQ
Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

Corona #Oak-2/793, Vacuum Pump, 2.5" Diameter Inlet/Discharge, #32305

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Dekker Vacuum Technologies vacuum system, on skid, 75 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

Demarco #AX20ES-Max-Vac, vacuum pump, 20 HP motor, rebuilt 1995

 
 Visit Dealer's Equipment Listings  RFQ
World Equipment & Machine Sales, Stow, OH 440-519-1745 (Email: mike@foundry-eqpt.com) Mike Spiegle

Fangli #A Ningbo, Water-Ring Vacuum Pump, Iron Casing,10 HP AC Motor,480 V.,1730 RPM,#32303

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Fuller Vacuum Pump, 4MV-F, 7-1/2 HP, #3124

  Photo
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Fuller Vacuum Pump, 5MV-B, 10 HP, #3432

  Photo
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Gardner-Denver Nash #2BE1505-1BY3C001, vacuum pump, rebuilt, 2008

  Photo
 Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, Plymouth, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman

Gardner-Denver Nash #CL-405, type CL liquid ring vacuum pump,factory reconditioned

  Photo
 Visit Dealer's Equipment Listings  RFQ
U S Combustion Products Inc, Ketchum, ID 208-725-5781 (Email: s.backstatter@uscombustion.com) S.Backstatter

Gardner-Denver Nash #SC4/7, liquid ring vacuum pump, no motor, used, 2012, #15647

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
J & M Industrial Inc, Millwood, WV 304-273-0795 (Email: equip@jmindustrial.com) Sheldon Sharp

Gardner-Denver Nash #TC-5-5, 2 stage vacuum pump, Stainless Steel, 1170 RPM, 2002

  Photo
 Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, Plymouth, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman

Graham #2PV3208, Vacuum Pump On Base, #24452

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Graham #2PV52200/13/DD, 15 GPM, liquid ring, 25 HP, 1775 RPM, 65 deg. F.,(2) 2" inlet/outlet,skid mounted

  Photo
 RFQ
Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

Graham #3PV52200/10/DD, liquid ring, 25 HP, 1760 RPM, (2) 2" inlet/outlet, skid mounted

  Photo Spec Sheet
 RFQ
Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

Graham #MV4C.1.60, Liquid Ring Vacuum Pump, 1.5"x1.5" Inlet/ Discharge, #31173

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Graham #PV61335, Vacuum Pump, 4x5", Iron, #35460

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Hibon #Alpha-05, Single Stage Liquid Ring Vacuum Pump, #32272

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Kinney High Vacuum Pump, 3 HP, #2496

  Photo
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Kinney #HC-100, Vacuum Pump, Iron With Iron Internals, On Base With 7.5 HP, 460V, 1745 RPM, Fr213T Motor, #25075

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Kinney #KLRC-40FA2, liquid ring vacuum pump

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

Kinney #M3615T, 3"x 2", 5 HP, 1750 RPM, belt driven, on skid (2)

 
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Kinney Liquid Ring Vacuum Pump, 5 HP, #3060, #3061

  Photo
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Leybold #D65B, factory remanufactured, 1-year warranty

 
 RFQ
Metallurgical High Vacuum, Fennville, MI 269-543-4291 (Email: darel-r@methivac.com) G. Humberstone

Leybold #DK-50

 
 RFQ
Furnace Brokers International, Tolland, CT 860-875-3712 (Email: jtbouley@aol.com) John Bouley

Leybold #E-250

 
 RFQ
Furnace Brokers International, Tolland, CT 860-875-3712 (Email: jtbouley@aol.com) John Bouley

Nash #1006, vacuum pump, size AT-1006, position 4

  Photo
 Visit Dealer's Equipment Listings  RFQ
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Email: subpump@aol.com) Linda/ Frank

Nash #2BE3-720, Vacuum Pump, S/S Casing, Rotors, Cones, Position 1, #31041

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #904L1-2-3, Rebuilt

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

Nash #904M1-2-3, Rebuilt

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

Nash #904P, Vacuum Pump, Iron, #40798

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #904P1-2-3, as new

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

Nash #904R1-2-3, Rebuilt

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

Nash #904S, Nash rebuilt & tested

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

Nash #904T2-1, Rebuilt

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

Nash #904U2, rebuilt

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

Nash #AHF50, vacuum pump system, 3 HP, skid mounted with Stainless Steel manifold, Fisher control valve & explosion proof controls

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

Nash #AL-572, Vacuum Pump, 1740 RPM, Iron, #30907

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #AT-2006, 100HP, complete skid, 2007

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 262-476-5045 (Email: info@gibuys.com) Jeff Herrick

Nash #CD663, Vacuum Pump, 2x2", Iron, #34660

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CD663C, Vacuum Pump, 2x2", Iron, #34662

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-200, Vacuum Pump, Iron, Position 4, Rebuilt storeroom spare, #31362

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-202, Vacuum Pump, Iron, Position 4, 1750 RPM, #32302

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-202, Vacuum Pump, Iron, #33369

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-302, Vacuum Pump, Cast Iron, #20871

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-401, Vacuum Pump, Position 4, Iron, #36869

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-401, Vacuum Pump, Test No.: 76U2331, 1170 RPM, #20999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-402, Vacuum Pump, 1170 RPM, Iron, #32306

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-402, Vacuum Pump, 1150 RPM, Iron, #30904

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-403/4, Vacuum Pump, Position 4, S/S Casing, 2004, #31447

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-703, liquid ring vacuum pump with 50 HP motors, $12,300

  Photo
 RFQ
Bondtech Corp., Somerset, KY 606-677-2616 (Email: elsabrown@earthlink.net) Elsa Brown

Nash #CL-1000, Vacuum Pump, With 50 HP AC Motor, 1770 RPM, 460 V., #33291

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-1001, Vacuum Pump, #19332

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-1001, Vacuum Pump, Position 4, 880 RPM, #22943

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-1001, Vacuum Pump, Position 4, #24777

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-1001, Vacuum Pump, Iron, 1989, #38530

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-1003, Vacuum Pump, 2008, #33055

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-1501, Vacuum Pump, #41281

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-1501, Vacuum Pump, S/S Clad lining, Iron rotor, Iron cones, rebuilt by CVN in 2008, #35807

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-1502, Vacuum Pump, 705 RPM, Position 4, Iron, #32959

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-2000, Vacuum Pump, With 100 HP AC Motor, 1780 RPM, 460 V., #33292

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-2001, Vacuum Pump, Position 1, Iron, Cw Rotation, #39171

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-2001, Vacuum Pump, Iron, #24825

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-2001, Vacuum Pump, #26562

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-2001, Vacuum Pump, Iron Casing, S/S Shaft, S/S Rotor, S/S Cones, #39934

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-2002, Vacuum Pump, Position 1, #39489

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-2002, Vacuum Pump, #41280

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-2003, Vacuum Pump, #41279

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-3001, Vacuum Pump, Position 1, Iron, #39490

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-3001, Vacuum Pump, S/S Lined Casing,Iron Rotor,Iron Cones,Iron Heads,Iron Shaft,Position 1,2002,#38203

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-3001, Vacuum Pump, Position 1, Iron, Rebuilt By Nash In 2008, Storeroom Spare, Unused Since Rebuild, #38545

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-4001, Vacuum Pump, S/S Clad Casing, #40750

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-4002, Vacuum Pump, S/S Clad Casing, Rebuilt By Armstrong, #40843 (2)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-4002, Vacuum Pump, S/S Clad Casing, Rebuilt by IPS, 2013, #40779

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-4002, Vacuum Pump, S/S clad casing, S/S shaft, iron rotor, 1996, #41405

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-4002, Vacuum Pump, S/S Clad Casing, Rebuilt by Nash,2013-2014, (2) #40780

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-6001, Vacuum Pump, Iron, 277 RPM, Double Extended Shaft, 6.5" dia. shaft, 1981, #27354 (2)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-6001, Vacuum Pump, #23507

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-6002G, Vacuum Pump, rebuilt 2000, #18512

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-9001, Vacuum Pump, 1982, #26717

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-9002, Vacuum Pump, Position 1, Reconditioned In 2007 By Industrial Pump Service, #33048

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #CL-9002, Vacuum Pump, Position 1, #33050

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #H4, H5, H6, H7, H8, H9, H10, H11

 
 RFQ
Engineered Coatings & Machine, Birmingham, AL 205-856-3700 (Email: ecminc@aol.com) Ed Delorme

Nash #H7, Vacuum Pump, 1300 RPM, Iron, #32311

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #H9, Vacuum Pump, #24593

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #L2, Vacuum Pump, Iron, #35586

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #L3, Vacuum Pump, Position 1, 2x2", Rebuilt Storeroom Spare, #33437

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #L3, Vacuum Pump, Iron, #27917

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #L3, Vacuum Pump, 1750 RPM, Iron, #31771

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #L3, Vacuum Pump, #22008

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #L4, Vacuum Pump, Ductile Iron, Rebuilt Storeroom Spare, #31359

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #L7, Vacuum Pump, Test # 574755, 570 RPM, Iron, #30909

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #L7, Vacuum Pump, Cw Rotation, Clockwise rotation, #18592

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #L7, Stainless Steel vacuum pump, rebuilt by Armstrong Pump

  Photo
 Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, Plymouth, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman

Nash #SC2, Vacuum Pump, 3" Flange, Iron, #32342

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #SC2, Vacuum Pump, Steel Base Plate, Cast Iron Construction, 2002, #27541

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #SC2, Vacuum Pump, Position 4, 1750 RPM, Iron, #35241

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #SC2, Vacuum Pump, Iron, w/base, 3x2, #33453

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #SC2/4, Vacuum Pump, Iron, 1750 RPM, Unused storeroom spare, #32171

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #SC2/7, Vacuum Pump, 1750 RPM, Iron, #34636 (5)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash Elmo #SC2/7, Vacuum Pump, Iron, #34121

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #SC2/7, Vacuum Pump, Iron, #34658

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #SC3, Vacuum Pump, Iron, #33684

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #SC3 position 4

  Photo
 Visit Dealer's Equipment Listings  RFQ
Suburban Pump & Machine, Bridgeville, PA 412-221-2823 (Email: subpump@aol.com) Linda/ Frank

Nash #SC3/7, Vacuum Pump, 1170 RPM, Iron, #32893 (3)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #SC5, Vacuum Pump, Iron, #33683

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #SC6/4, Vacuum Pump, 1170 RPM, Iron, #23182

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #TC5, Vacuum Pump, 1170 RPM, #21607

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #TC5, Vacuum Pump, 1170 RPM, Iron, #32308

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #TCM3, Vacuum Pump, Iron, 1750 RPM, #32301

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #XL100/5, vacuum pumps, Stainless Steel, excellent shape (2 available)

  Photo
 Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, Plymouth, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman

Nash #XL130-7, Vacuum Pump, 1170 RPM, Iron, 2003, #32312

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Nash #XL250/5, liquid ring vacuum pump, 824 GPM, 6 x 6, 316 Stainless Steel, 75 HP, 880 RPM, unused, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 732-217-7314 (Email: Jesse@phxequip.com) Jesse Spector

Pfeiffer #WS6000, industrial vacuum, two-stage rotary vane pumping station, #17521

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
J & M Industrial Inc, Millwood, WV 304-273-0795 (Email: equip@jmindustrial.com) Sheldon Sharp

Quincy #QSV140ACA3H, Vacuum Pump, 280 V., 2001, #7205

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Rietschle #VC-700, rotary vacuum pump, 25 HP, 1160 RPM, Fr.324TC motor, nice

  Photo
 Visit Dealer's Equipment Listings  RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

Roots #615RGS-HVB, horizontal flow, mech.shaft seal for long seal life, bare shaft

 
 RFQ
Metallurgical High Vacuum, Fennville, MI 269-543-4291 (Email: darel-r@methivac.com) G. Humberstone

Siemens #2BA-6678-3H, Vacuum Pump, S/S, 2000, Rebuilt By Smith Services, 2000, #38253

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Siemens #2BE-1606-1BY3Z, Vacuum Pump, Iron Casing, Rotor, Cones, 1984, #37096

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Sihi #903739, Vacuum Pump, Ductile Iron Impeller, 7/8" Dia Shaft, 1.5" Dia Intake, 1.5" Dia Discharge, #25139

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Sihi #AOHA-1203-BN001010, Vacuum Pumps, Unused (2), #20872

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Sihi #AOHA-1203-BN001010, Vacuum Pump, Iron Casing, Iron Rotor, S/S Shaft, Unused Storeroom Spare, #37973 (2)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Sihi #LPH, Vacuum Pump, Iron, #32410

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Sihi #LPH, Vacuum Pump, 2" Diameter Intake, 2" Diameter Discharge, 32" Shaft Length, #32299

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Sihi #LPHE-45316, Vacuum Pump, 1.5" Inlet/ Discharge Flange Diameter, Pump # D-3217679, Iron, #32314

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Sihi #LPHQ-3708, Vacuum Pump, #24453

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Sihi #LPHR, Vacuum Pump, Iron rotor, Iron cones, Cast Iron body, Cast Iron heads, #24807

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Sihi, liquid ring vacuum pump, 1-1/2" x 1-1/2", 7.5 HP, 1725 RPM, mounted on base w/motor

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

Somarakis #SV3028.1, Vacuum Pump, Cast Iron Rotor, remanufactured 1998, #27552

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Stokes #149H-11

 
 RFQ
Furnace Brokers International, Tolland, CT 860-875-3712 (Email: jtbouley@aol.com) John Bouley

Stokes #212-11, 7.5 HP

  Photo
 RFQ
Consolidated Equipment Co, Ft. Gratiot, MI 810-966-1500 (Email: ghowell@consequip.com) George Howell

Stokes #412H-11, remfd by MHV, 4"inlet, rotary piston pump, 1-year warranty

  Spec Sheet
 RFQ
Metallurgical High Vacuum, Fennville, MI 269-543-4291 (Email: darel-r@methivac.com) G. Humberstone

Stokes #412H-11

 
 RFQ
Furnace Brokers International, Tolland, CT 860-875-3712 (Email: jtbouley@aol.com) John Bouley

Stokes Edwards #900-412 Microvac, rotary piston vacuum pump

  Photo
 Visit Dealer's Equipment Listings  RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

Sutorbilt, 75 HP Liquid Ring Vacuum Pump, w/motor, Skid, and controls

  Photo
 Visit Dealer's Equipment Listings  RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

Taiko Kikai #MDP-680P, vacuum pump, 20 HP, 2015

  Photo
 Visit Dealer's Equipment Listings  RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

Ulvac #VDN601 Vacuum Pump, 1800 RPM, Unused Storeroom Spare, #39068

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Vooner #LR20-BVC-L, Vacuum Pump, S/S Rotor,S/S Cones,Clockwise Rotation,C/S Shaft,Iron Casing,Iron heads,#35802

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Vooner Vangard #VG10XVS-H, Vacuum Pump, 304 S/S Housing/rotor/cones, Cast Iron heads, #40025

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Vooner #VG30-A-L, Vacuum Pump,S/S Lined Casing,Rotor,Cones,Clockwise Rotation,410 S/S Shaft,Iron heads,Rebuilt 2008,#35831

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Vooner Vangard #VG10XVS-H, Vacuum Pump, 304 S/S Housing/rotor/cones, Cast Iron heads, #40026

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: david@canaminc.com) Dan / David

Back to category listings.


Photo = photo available    Spec Sheet icon = spec sheet available    PDF icon = PDF available    RFQ icon = request quote from seller    Video = video available    web site icon = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise