Browse:  Machinery Electrical
RSS Linkedin Instagram Blog Surplus Record

PRESSES, O.B.I., FLYWHEEL, SINGLE CRANK

S & G Press & Machinery Sales
There are 365 listings in this category
Update: Sun, Dec 15, 2019 00:33:40
Advanced Search
Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added
 
 
Original Sort

3 Ton, All Canada Engineering #3-1/2IP, OBI punch press, 1" stroke, 6" SH, 3-1/2" throat, 280 SPM, #7663HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

3 Ton, Perkins #Junior-E, punch press, 1" stroke, 5-1/4" SH, 3-1/2" throat, 285 SPM, #7662HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

4 Ton, Benchmaster #451, 1" stroke, mech.clutch, stand, start/stop push buttons, #A4234

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

4 Ton, Kenco #4, punch press, 1" stroke, electrical magnetic solenoid dual finger push button, control, #A2392

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

4 Ton, Kenco #4, punch press, 1" stroke, on/off switch, mechanical clutch, #A4251

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

5 Ton, Alceco #5, OBI punch press, 1" stroke, 6" SH, 5" throat, 260 SPM, #5754

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Alva Allen #BT-5, OBI punch press, 1-1/4" stroke, 7" SH, 280 SPM, 1/2 HP, #7324P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Benchmaster #41, OBI punch press, 1" str, 7.5" SH, 10" x 6.25" bed, 4" throat, 280 SPM, stand, mech. clutch, #8675HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Benchmaster #152, OBI punch press, 1" str, 7.5" SH, 10" x 6.25" bed, 4" throat, 280 SPM, stand, mech. clutch, #8677HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Benchmaster #152, OBI punch press, stand, #5422

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Benchmaster #153C, OBI punch press, 1.5" str, 7" SH, 10" x 6.25" bed, 4" throat, 280 SPM, stand, mech. clutch, #8676HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Benchmaster #191, OBI punch press, #5751

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Havir Press Rite #Rie-O, OBI punch press, 1" stroke, 6" SH, 4" throat, 260 SPM, 1/2 HP, #5753

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Kenco #054-105-200, OBI flywheel, 1-1/2" stroke, palm buttons, foot pedal, #5456

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

5 Ton, Kenco #5-101, OBI flywheel press, 1" stroke, 6-1/2" SH, 1" adj, 10" x 6" bed, 160 SPM, #8504HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Kenco #5-107, OBI flywheel press, 1" stroke, 6-1/2" SH, 1" adj, 10" x 6" bed, 5-1/4" throat, 160 SPM, stand, #8512HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Kenco #5-107, OBI flywheel press, 1" stroke, 6-1/2" SH, 1" adj, 10" x 6" bed, 4-1/4" throat, 160 SPM, #8508HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Kenco #5-107, OBI flywheel press, 1" stroke, 6-1/2" SH, 1" adj, 10" x 6" bed, 5" throat, 160 SPM, #8509HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Kenco #5N-1-1/2, OBI flywheel press, 1-1/2" stroke, 7" SH, 1" adj, 10" x 6" bed, 5" throat, 160 SPM, #8506HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Kenco #AG51-105-100, OBI gap frame mech.press, 1" stroke, 8" x 11-1/2" bed area, 9-1/2" SH, 250 SPM, air clutch, 1993, #147255

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

5 Ton, M.D. Knowlton punch press, 1-1/2" stroke, 2-1/2" x 4-1/2" bed, 1/2 HP, #7707HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Machine Works #5, OBI punch press, 1-1/4" stroke, 6" SH, 260 SPM, 1/2 HP, #5752

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Press Rite #O, OBI punch press, 1-1/4" stroke, 7" SH, 4" throat, 225 SPM, foot pedal, #7206

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5 Ton, Rousselle #0A, OBI punch press, 1-1/4" stroke, 5" SH, 3-1/2" throat, 200 SPM, 3/4 HP, #6224

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

6 Ton, Famco #50, OBI punch press, 1-1/4" stroke, 7" SH, 300 SPM, 1/2 HP, #6540P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

7.5 Ton, Benchmaster #7-1/2, OBI punch press, 1-1/4" stroke, 7-1/4" SH, 260 SPM, mech clutch, #6591C

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

7 Ton, Kenco #7-1/2, OBI punch press, 1" stroke, electric trip mechanical clutch, dual palm buttons, #7192

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

7.5 Ton, Kenco #7-1/2, OBI press, 1-1/2" stroke, magnetic start/stop push button, stand, mechanical clutch, #A4224

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

8 Ton, Kenco #8-1/2, OBI press, 1-1/2" stroke, on/off switch, mechanical clutch, stand, #A4222

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

8 Ton, Kenco #8-401, OBI flywheel punch press, 1.5" str, 13" thr, 4" hole, 24" x 16" bed, 1964, #7259

  Photo
 Visit Dealer's Equipment Listings  RFQ
Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

9 Ton, Perkins #200-B, OBI press, 1.5" stroke, 8" x 13" bed, 5.5" SH, 1.5" adjustment, air clutch, s/n #42672, 1977, #154572

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt

10 Ton, Benchmaster #183, OBI flywheel, 1" stroke, 7-3/4" SH, 11" x 8-3/4" bed, mechanical clutch, #8820HP

  Photo
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 Ton, Bliss #18C, 1.5" stroke, 7" Shut Height, 1-3/4" ram adjustment, 16" x 12" bed, 150 SPM, updated controls, air clutch & brake, #10410

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

10 Ton, Havir Press Rite #1A, OBI punch press, 2" stroke, 6" SH, 220 SPM, 3/4 HP, #7319P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 Ton, Perkins #2A, mechanical OBI punch press, 1" stroke, stand, Bijur One Shot lubrication system, Rapid 1-1/2" air feed, #A1957

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

10 Ton, Perkins #2A, punch press, 1" stroke, stand, electric foot pedal, Reeves vari-speed drive, air clutch, #A1956

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

10 Ton, Perkins #10C, OBI punch press, 1-1/2" stroke, 6-1/2" SH, 150 SPM, 1 HP, #7971P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 Ton, Press-Rite #1, OBI punch press, mechanical clutch, 2" stroke, 7-1/2" SH, 5-1/2" throat, 3/4 HP, 1140 RPM, 160 SPM, #28286

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

10 Ton, Rousselle #1A, OBI punch press, 2" stroke, 6-1/4" SH, 4" throat, 180 SPM, 3/4 HP, #7708HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 Ton, Rousselle #1A, 2" stroke, 6.5" SH, MC, 200 SPM, 1970 (3 Available)

  Photo
 RFQ
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

10 Ton, Rousselle #1A, 2" stroke, air clutch, from service

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

11 Ton, Knuth #KEX10, punch press, 1.6" stroke, 6" throat, 14.5" x 10.5" table, 2016, #5486

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

12 Ton, Walsh #12, OBI punch press, mechanical clutch, 1-1/2" stroke, 6-1/2" SH, 4-1/2" throat, 1 HP, 900 RPM, 175 SPM, #28284

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

14 Ton, V & O #1, OBI press, 3/4" str., 2.5" adj., 14.5" x 7.5" bolster, #10752

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

15 Ton, Kenco #15-101, OBI flywheel, 2" str, 18" x 11" bed, palm buttons, foot switch, #5455

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

15 Ton, Rousselle #2, OBI flywheel, 2" stroke, 7-3/4" SH, 16" x 11" bed, 5-1/2" throat, 160 SPM, mech.clutch, foot pedal, #8819HP

  Photo
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

15 Ton, Rousselle #2, OBI punch press, 2" str, 7.75" SH, 16" x 11" bed, 5.5" throat, 160 SPM, stand, mech. clutch, #8678HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

15 Ton, Rousselle #2F, OBI high speed punch press, 2" str, 8" SH, 1.5" adj, 24" x 18" bed, 1973, #7258

  Photo
 Visit Dealer's Equipment Listings  RFQ
Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

18 Ton, L & J #2, OBI punch press, 2" stroke, 7-3/4" SH, 5-3/4" throat, 150 SPM, 1-1/2 HP, #7626HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

18 Ton, Walsh #18, 1" str, 7-1/2" SH, 18.5" x 9.5" bed, vari-speed, OBI press, A/C, 1980, #156802

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

20 Ton, Bliss #95P, OBI punch press, 2" stroke, 8" SH, 4-1/2" throat, 150 SPM, 2 HP, #7622

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

20 Ton, Minster #6, double action OBI, 3" & 4.5" stroke, 19" & 13" SH, 75-150 SPM, 37" x 21" bed

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

22 Ton, Bliss #19-1/2B, OBI punch press, 2" stroke, 8" SH, 7-3/4" throat, 150 SPM, 3 HP, #7624HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

22 Ton, Bliss #C-22 OBI, 2" stroke, 12" x 20" bed area, 9-1/2" SH, air clutch, tag #16080

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

22 Ton, Bliss #C-22, 2.5" str, 9.25" SH, 2.25" ram, 23.5" x 14" bed, A/C & brake, 3 HP, #8502HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

22 Ton, Bliss #C-22, OBI press, 2.5" stroke, 9.25" SH, 23" x 14" bed, air clutch & brake, 150 SPM, #28158

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

22 Ton, Bliss #C-22, 2.5" stroke, 9.25" Shut Height, 60-170 SPM variable, Wintress Die Pro, air clutch & brake, 1992, #10471

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

22 Ton, Bliss #C-22, 4" str, 9.75" SH, 130-230 SPM, 23.5" x 14" bed, S35751

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

22 Ton, Bliss #C22, 23" x 14" Bed, 1987

  Photo Spec Sheet
 RFQ
Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

22 Ton, Bliss #CH-22, OBI press, 2-1/2" stroke, 9-1/4" SH, air clutch & brake, 1992, #158810

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt

22 Ton, Clearing Torc-Pac #22T-620-30, 4" str, 10.5" SH, 2" adj., OBI mech press, A/C, #10497

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

22 Ton, Federal #22 OBI, 2-1/2" str, 9-1/2" SH, 12" x 20" bed area, air clutch, tag #16082

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

22 Ton, Federal #22 OBI, 2-1/2" str, 9-1/2" SH, 12" x 20" bed area, air clutch, VS drive, #16081

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

22 Ton, Minster #3, OBI press, 3" stroke, 8.5" SH, 100 SPM, air clutch & brake

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

22 Ton, Minster #B1-22, 1-1/4" stroke, 21" x 12" bed, 8-3/4" SH, 500-1000 SPM, A/C & brake

  Photo Spec Sheet PDF icon
 Visit Dealer's Equipment Listings  RFQ
Nidec Press & Automation, Minster, OH 860-919-5436 (Email: rich.ruck@nidecpa.com) Rich Ruck

22 Ton, Niagara #3, OBI punch press, 3" stroke, 7-1/2" SH, 5" throat, 80 SPM, 1-1/2 HP, #7184

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

22 Ton, Niagara #M-22, 4" stroke, 12" SH, 20" x 12" bed, OBI press, A/C, CEICO PPC110R control, #157061

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

24 Ton, Walsh #24, OBI punch press, 2" stroke, 8" SH, 6" throat, 135 SPM, 2 HP, #28178

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

24 Ton, Walsh #24, OBI punch press, 2" stroke, 8" SH, 6" throat, 135 SPM, 2 HP, #28177

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

25 Ton, Benchmaster OBI, 2-1/2" stroke, air clutch, tag #16079

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

25 Ton, Danly, 3" stroke, 8-3/4" SH, bolster, air clutch, Tag #16033

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

25 Ton, Hidaka Mark #25, light curtain, hydraulic overload protection, dual counterbalance, 1986, #8142

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

25 Ton, Rousselle #3F, OBI deep throat punch press, 3" stroke, dual palm button operation, 2 HP, air clutch & brake

  Photo
 RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

27 Ton, Johnson #27FWAC, 2.5" stroke, 9.87" Shut Height, 2.5" adj., 21.5" x 13" bed, air clutch palm buttons

 
 RFQ
Diamond Jack Machinery Inc, Fort Smith, AR 479-785-2554 (Email: djm@diamondjackmachinery.com) Jack Yancey

27 Ton, Johnson #27W-FW-AC, 2" stroke, 12.75" SH, air clutch & brake, good condition

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

27 Ton, Johnson #3, OBI punch press, 3" str, 9.87" SH, 23" x 13" bed, 7.25" throat, #8294HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

27 Ton, L & J #2, OBI press, 2.5" stroke, 13" x 21" bed, 120 SPM

  Photo
 RFQ
Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: carl.amick@machinerysolutions.com) Carl Amick

27 Ton, L & J #27, OBI punch press, 2-1/2" stroke, 9" SH, air clutch & brake, 120 SPM, #28040

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

27 Ton, L & J #27, 2.5" stroke, 11" SH, 130 SPM, air clutch, s/n #35882A, 1987, #154772

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

27 Ton, L & J #W-27, OBI punch press, 2" stroke, 3" adj., 11-1/2" SH, air clutch, 1968

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Victory Machinery Exchange, Lake Forest, IL 847-918-9797 (Email: sales@victorymachinery.com) Bob or Neal

27 Ton, South Bend #27-FW-AC, 2.5" stroke, 9-7/8" SH, air clutch & brake, 1983, #68392

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

27 Ton, South Bend Johnson #27-FWAC, 2-1/2" stroke, 9-7/8" SH, 160 SPM, air clutch & brake, 3 HP, s/n #83008, 1983, #29887

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

28 Ton, Perkins #375B, OBI open back inclinable press, 2" stroke, 2-1/2" adj., 12" x 22" bed area, 8" SH, 200 SPM, air clutch, 1973, #4582

  Photo Spec Sheet
 RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

28 Ton, Walsh #28, 3" stroke, vari-speed drive, air clutch & brake, tag #14290

  Photo
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

30 Ton, Heim #3A, OBI flywheel press, 2" str, 14.5" SH, 24" x 15" bed, 8.5" thrt, 140 SPM, 3 HP, air clutch, dual palm control, #8524HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

32 Ton, Bliss #20C, OBI press, 2.5" stroke, 12.75" SH, 110 SPM, 2" adj., 26" x 18" bed, air clutch, 1955, #152784

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

32 Ton, Clearing Torque Pac #JA32T640.10, 70-90 SPM, 4" str, 11.5" SH, 2.5" adj., 1957

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

32 Ton, Federal #32, 3" stroke, 11-1/2" SH, 24" x 15" bed, 100-200 SPM, A/C, 1993, #51136

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

32 Ton, Federal #32, open back inclinable press, 3" stroke, 100-300 SPM, air clutch & brake, s/n #32-494, 1983, #155344

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

32 Ton, Federal #32, OBI press, 3.5" stroke, 10.5" SH, 15" x 24" bed, 133 SPM

  Photo
 RFQ
Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: carl.amick@machinerysolutions.com) Carl Amick

32 Ton, Federal, OBI flywheel press, 3" str, 11" SH to bed, 24" RLx15" FB, 60-200 SPM, #sr4655

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

32 Ton, Heim #3-OBI-F, OBI flywheel type punch press, 2" stroke, 10-1/2" SH, air clutch & brake, 140 SPM, 3 HP, #28207

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

32 Ton, Minster #4, OBI, 3" str, 7" SH, 24" x 15" bed, 2-1/4" slide adj, 200 SPM, 1972, #71882

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

32 Ton, Minster #4, OBI, 3" stroke, 9-1/2" SH, 24" x 15" bed, 65-130 SPM, #5026

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

32 Ton, Minster #4, 3" stroke, 9.5" SH, 24" x 15" bed, 100-200 SPM, free standing control, #27144

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

32 Ton, Minster #4, OBI punch press, 4" stroke, A/C & brake, 24" x 15" x 2-1/2" bolster plate, dual palm control, #A2254

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

32 Ton, Minster #4, 4" str, 10" SH, 24" x 15" bed, 150 SPM, reconditioned, under power, #sr5504

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

32 Ton, Minster #4, OBI punch press, 4" stroke, 11-1/2" SH, air clutch & brake, #28058

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

32 Ton, Minster #4, OBI flywheel, 4" stroke, 11.5" SH, A/C, 24" x 15" bed, 1972, #3265JV

  Photo
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

32 Ton, Minster #4, 4" stroke, 13" SH, 24" x 15" bed, 130 SPM, reconditioned, #sr5505

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

32 Ton, Minster #4, OBI punch press, 5" stroke, 11-1/2" SH, air clutch & brake, #28059

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

32 Ton, Minster #4, air clutch & brake, 24" x 15" bed, #7104

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

32 Ton, Minster #4, OBI punch press, 1974, #5779

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

32 Ton, Minster #4SS, 24" x 16" bed, 1" str, 2.25" adj, 12.5" SH, 650 SPM, feed/str., '85, #37778

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

32 Ton, Minster #4SS, OBI press, 4" str, 15" SH, 2.25" ram adj., A/C & brake, '95, #157450

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

32 Ton, Minster #4SS, gap press, 4" stroke, 15" Shut Height, 2.25" ram adjustment, 90-180 SPM variable, 24" x 16" bed, knock out, air clutch & brake, 1995, #10285

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

32 Ton, Minster, 4" stroke, 8.5" SH, 24" x 15" bed, 100 SPM, #sr4880

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

35 Ton, Bliss #C35, 3" stroke, air clutch & brake, Bliss cushion, dual palm control, #A1941

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

35 Ton, Bliss #C35, OBI gap frame press, 4" stroke, 14.25" SH, air clutch, 1994, #158908

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

35 Ton, Bliss #C35, 4" stroke, 14.25" Shut Height, 120 SPM, light curtains, recirculating lube, palm buttons, ADV III control, air clutch & brake, 1994, #10481

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

35 Ton, Bliss #C35, OBI punch press, 5" stroke, 10-3/4" SH, 9" throat, 120 SPM, 3 HP, air clutch & brake, #28075

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

35 Ton, Bliss #C35, OBI punch press, air clutch & brake, STI light curtains, #5862P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

35 Ton, Bliss #CH35, 1" str, 9.25" SH, 26" x 17" bed, 100-300 SPM, A/C & brake, '64, #100489

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
R A B Industries Inc, Washington, MI 586-752-0090 (Email: rabind@comcast.net) Rod A Blasius

35 Ton, Bliss, 1" stroke, 11" SH, 26.5" x 17" bed, 175-350 SPM, 6" Perfecto feed, '74, #sr4295

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

35 Ton, Danly #35, 2" stroke, 10" SH, OBI punch press, serial #355-1950163, #6720P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

35 Ton, Johnson #35-FW-AC, 2.5" stroke, 11" Shut Height, 24" x 15" bed, 110 SPM, air clutch & brake, 1965, #10028

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

35 Ton, Niagara #M-35, OBI flywheel press, 3" stroke, 10.5" SH, air clutch & brake, 1980

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Strand Industrial Machinery, Hamel, MN 763-478-0306 (Email: info@strandindustrialauctions.com) Dan Strand

35 Ton, South Bend Johnson #35FW-AC, 2.5" str, 11" SH, 24" x 15" bed, 150 SPM, 1978, #sr5510

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

35 Ton, South Bend Johnson #OBI-35, 11" SH, 2-1/2" adj. slide, 2-1/2" str., 24" x 15" bed, 150 SPM, s/n 77019

 
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

36 Ton, L & J #36, OBI press, 3" stroke, 3" adjustment, 9" SH on bed, 26-1/2" x 15" bolster RL x FB

  Photo
 RFQ
A & A Machinery Liquidations, Morrisville, PA 215-428-1100 (Email: aasales@aamachinery.com) Tim Cromwell

36 Ton, L & J, OBI press, 12-1/2" x 15" bed, 11" SH, 3" stroke, serial #42152

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Silverlight CNC, Barrington, IL 847-450-1099 (Email: jeff@silverlightcnc.com) Jeff Katzbeck

38 Ton, Walsh #38, OBI punch press, 2-1/2" stroke, 14" SH, 7-1/4" thrt, 110 SPM, 3 HP, #28176

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

38 Ton, Walsh #38X, OBI punch press, 4" stroke, 11" SH, 12" throat, 3 HP, 110 SPM, #28239

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

40 Ton, Brown & Boggs #40, 2.5" stroke, 8" SH, 28" x 18" bed, 100 SPM, s/n #85156

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

40 Ton, Brown & Boggs, 1.5" str, vari-spd.100-400 SPM, 8.5" SH, 28" x 18.5" bed, 1980' s, #2302

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Mauldin Machine Inc, Jacksonville, AR 501-835-5494 (Email: mail@mauldinmachine.com) Jerry Mauldin

40 Ton, Niagara #M-35, 3" stroke, 10.5" SH, air clutch & brake, 24" x 15" bed, #3984

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

40 Ton, Rousselle #4, OBI press, 3" str, 12" SH, 3.5" adj., 165 SPM, A/C & brake, #10575

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

40 Ton, Rousselle #4, 3" stroke, 12" SH, 3.5" adj., 9" throat, 26" x 16" bed, A/C, 1984

 
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

40 Ton, Rousselle #4G, dep throat punch press, 3" stroke, 12-1/2" SH, 26" x 16" bed, 24" throat, 3 HP, 105 SPM, #27980

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

45 Ton, Bliss #21-1/2, OBI punch press, 4" stroke, air trip mechancial clutch, dual palm buttons, #A1943

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

45 Ton, Bliss #C35, 26-1/2" x 17" Bed, 1970

  Photo Spec Sheet
 RFQ
Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

45 Ton, Bliss #C45, OBI press, 3" stroke, 3" adj., 12.25" SH, 18" x 29" bed, 70-140 SPM, pneumatic clutch & brake, #13491J

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

45 Ton, Bliss #C45, OBI press, 3" stroke, 12-1/4" SH, 3" slide adj., 9.5" throat, 50 SPM, 1989

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Strand Industrial Machinery, Hamel, MN 763-478-0306 (Email: info@strandindustrialauctions.com) Dan Strand

45 Ton, Bliss #C45, gap frame, 3" str, 12.25" SH, 29" x 18" bed, 100 SPM, under power, '72, #sr5266

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

45 Ton, Bliss #C45, OBI flywheel press, 3" stroke, 12-1/4" SH, air clutch & brake, 29-1/2" x 19-1/2" bed, 120 SPM, 1979, #13841J

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

45 Ton, Bliss #C45, OBI flywheel press, 3" str, 12.25" SH, 3" adj, 29.5" x 18" bed, A/C & brake

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

45 Ton, Bliss #C45, OBI flywheel press, 3" str, 12.25" SH, 3" ram, 29.5" x 18" bed, A/C & brake

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

45 Ton, Bliss #C45, OBI punch press, 5" str, 12" SH, air clutch & brake, 7.5 HP, S/N H57622

  Photo
 RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

45 Ton, Bliss #C45, 6" stroke, 9.25" SH, 110 SPM, 29.5" x 19.5" bolster, S35750

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

45 Ton, Bliss #C45, 6" stroke, 13.5" shut height, 13" slide adjustment, #10840

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

45 Ton, Bliss #C45, OBI punch press, serial #H68157, 1977, #6378P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

45 Ton, Bliss #CH-45, 2" str, 12" SH, 29x19" bed, 125 SPM, extensive recondg, under power, #sr5114

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

45 Ton, Bliss #CH-45, 2.25" str, 12.8" SH, 29" x 19" bed, 144 SPM, reconditioned, '78, #sr5115

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

45 Ton, Bliss #CH45, 2" str, 12.7" SH, 3" adj, 29.5" x 18" bed, 200 / 400 SPM, S37417

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

45 Ton, Bliss #CH45, 2.25" stroke, 12.75" SH, 29.5" x 19" bed, over 20 presses in stock

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

45 Ton, Bliss, 1.5" stroke, 12" SH, 29.5" x 18" bed, 150-450 SPM, w/6" W SRF, 1979, #sr4297

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

45 Ton, Clearing #Torc-Pac-45, 6" stroke, 11" SH, 28" x 18" bed, 60 SPM, air clutch & brake, s/n #57-7231, #28953

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

45 Ton, Clearing #Torc-Pac-45, OBI press, 6" stroke, 11" SH, 60 SPM, air clutch & brake

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

45 Ton, Danly, OBI press, 3" stroke, 11-1/2" SH, 2-1/2" ram adj., 28" LR x 18" FB bed, air clutch & brake, 90-120 SPM, #13014J

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

45 Ton, Elkhart, OBI flywheel press, 3" str, 12" SH, 28" x 18" bed, approx.100 SPM, #sr4662

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

45 Ton, Federal #45, OBI press, 3" stroke, 11" SH, 10" throat, 28" x 14" bed, 120 SPM, 5 HP, S39472

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

45 Ton, Federal, OBI punch press, 3" str., air cl./brake, 11" SDAU, light curtains, #5038

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

45 Ton, Federal, OBI press, 3" stroke, 11.5" SH, 120 SPM, air clutch & brake, 1992, #63515

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

45 Ton, Federal, 3" stroke, 11" SH, 28" x 18" bed, 120 SPM, under power, 1972, #sr4867

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

45 Ton, L & J, 3" stroke, 10.5" SH, 28" x 18" bed, vari-speed drive, brake monitor, #27516

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

45 Ton, Minster #5, OBI press, 2-1/2" stroke, 13" SH, 9-1/2" throat, 90 SPM, A/C, #4857

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

45 Ton, Minster #5, 2-1/2" stroke, 18" x 29" bed, 90 SPM, air clutch, 1993

  Photo Spec Sheet
 RFQ
Planet Machinery Co, Livonia, MI 248-957-6439 (Email: planetmachinery@live.com) Ken

45 Ton, Minster #5, OBI punch press, 3" stroke, 8.5" SH, 28" x 18" bed, 90 SPM, air clutch & brake, #27637

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

45 Ton, Minster #5, OBI, s/n #16228, 3" stroke, 10.25" SH, 2.75" ram adj, 60-180 SPM, 1966

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

45 Ton, Minster #5, OBI press, 3" stroke, 10.25" SH, 2.75" ram adj., 28" x 18" bed, air clutch & brake, 60-180 SPM, 1978, #13090J

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

45 Ton, Minster #5, OBI press, 3" str, 11" SH, air clutch, 28" RL x 18" FB bed, 1954, #1352

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

45 Ton, Minster #5, 3" str, 12.75" SH, 2.5" adj, 28" x 18" bed, A/C & brake, mech press

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Rygate, LLC, Clarkston, MI 248-709-6723 (Email: brian@rygatellc.com) Brian Bridgeman

45 Ton, Minster #5, 3" str, 12-3/4" SH, 928" x 18" bed, 90-180spm, air clutch & brake, #3940

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

45 Ton, Minster #5, C-frame press, 3" stroke, 15" SH, 2.75" adjustment, 90 SPM vari, A/C

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

45 Ton, Minster #5, OBI press, 3" str, 18" SH, 2.5" adj, 28" x 18" bed, 180 SPM, 1988, #10683

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

45 Ton, Minster #5, OBI press, 3.5" stroke, 12.5" SH, 2.5" powered ram adj., 14" x 18" bed, 0-120 SPM, air clutch & brake, 2004, #13563J

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

45 Ton, Minster #5, 4" stroke, air clutch & brake, dual palm button control, s/n #SS-5-23770, used, #A4445

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

45 Ton, Minster #5F, air clutch & brake, screw type inclining mechanism, 3" stroke, 13.25" SH, 9.5" throat, 90 SPM, #28827

  Photo
 Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

45 Ton, Minster #5SS, 3" str, 12.75" SH, 5" adj, 28" LR x 18" FB, air clutch, 590-180 SPM

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

45 Ton, Minster #101-5F, 4" str, 9.25" SH, 2.5" ram adj., 28" x 18" bed, A/C & brake

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

45 Ton, Minster #45 OBI, 4" stroke, 11.75" Shut Height, 28" x 18" bed, 45-90 SPM variable-speed, Bijur lube, air clutch & brake, 1960, #9911

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

45 Ton, Minster #B1-45, flywheel gap press, 2" stroke, 10.75" Shut Height, 2.75" ram adjustment, 150-400 SPM variable, air clutch & brake, 1968, #9988

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

45 Ton, Minster #B1-45, 2" str, 10.75" SH, air cl. & brake, s/n #15896, 1968, #155085

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

45 Ton, Minster #B1-45, flywheel gap press, 3" stroke, 12" Shut Height, 2.75" ram adjustment, 125-250 SPM variable speed, air clutch & brake, 1976, #9987

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

45 Ton, Minster #B1-45, 3" stroke, 12" SH, air clutch & brake, s/n #21727, '76, #155084

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

45 Ton, Minster, 3" str, 13" SH, 27" x 18" bed, 120 SPM, reconditioned, under power, #sr5149

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

45 Ton, Minster, OBI flywheel, 3" str, 12" SH, 2.25" ram, 130 SPM, A/C & brake, 1984

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

45 Ton, Minster, OBI flywheel type press, 3" str., 15" SH, 28" x 18", 45-90 SPM, w/cushion

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

45 Ton, Niagara #A-3, OBI punch press, 4" stroke, 12-1/4" SH, 9" throat, 100 SPM, 3 HP, #7620HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

45 Ton, Niagara #A3-1/2, OBI punch press, 3" str, 12.25" SH, 10.25" thrt, mech.clutch, #8295HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

45 Ton, Niagara #A3-1/2, air clutch & brake, air counter balance, auto lube, 5 HP, serial #38290, #6338

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

45 Ton, Niagara #A45, 3.5" stroke, 12" SH, 2-5/8" Adj., 28" x 18" bed, 100 SPM, #5191

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

45 Ton, Niagara #M-45, flywheel gap, 1/2" str, 13.5" SH, 28" x 18" bed, 110 SPM, 1975, #sr4543

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

45 Ton, Niagara #M45, flywheel OBI, air clutch & brake, high frame, 2" bolster plate, 5" stroke, 16.25" SH, 9.5" throat, #28697

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

45 Ton, Perkins #45-S, OBI press, 3" stroke, 8" SH, 300 SPM, air clutch, 1963, #4458

  Photo Spec Sheet
 RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

45 Ton, Precision Industries #45NGOBI, non geared OBI press, 3" str, 12" SH, 10" thrt, 2015

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Strand Industrial Machinery, Hamel, MN 763-478-0306 (Email: info@strandindustrialauctions.com) Dan Strand

45 Ton, South Bend Johnson #45-FW-AC, 3" str, 11.25" SH, 3" adj, 28" x 18" bed, A/C, 125 SPM

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

45 Ton, South Bend #45FWAC, 4" stroke, 10-1/4" SH, A/C & brake, 87-175 SPM, 5 HP, #68852

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

45 Ton, Stamtec #CAF-45H, gap press, 1.54" stroke, 9.06" SH, 2.95" adj., 100-400 spm, 2002

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

45 Ton, V & O #45, 3" stroke, air clutch, air brake, dual palm buttons, tag #13924

  Photo
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

45 Ton, Walsh #45XAC, 4" str., 27" x 20" bed, 120 SPM, 2-1/2" slide adj., 12" thrt, A/C, exc, 1980

  Photo Spec Sheet
 RFQ
Kingsmen Machinery Co, Burnsville, MN 952-890-2419 (Email: kingsmenmachinery@msn.com) George Stensgard

46 Ton, Federal #44, 6" stroke, 14" SH, OBI punch press, serial #44-469, #6719P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

50 Ton, Federal, 3" str., 10" SH, 30" x 19" bed, 90 SPM, 2.5" ram adj., updated Rockford control

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

50 Ton, Heim #5-OBI-F, flywheel OBI press, 4" stroke, 12.5" Shut Height, 4" adjustment, 120 SPM, 28" x 18" bed, air clutch & brake, 1982, #7591

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

50 Ton, Seyi #SN1-50, gap frame press, 4.3" stroke, 10.6" Shut Height, 50-85 SPM, 33" x 17" bed area, hydraulic overload, air clutch & brake, 2002, #10126

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

50 Ton, Zhe Jiang #JZ21H-45, 2-1/2" stroke, 32" LR x 17-1/2" bed, A/C, keyed controls, dual palm buttons, new machine

  Photo
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

55 Ton, Heim #5GA-BG, gap frame press, 6" stroke, 15-1/2" SH, 60 SPM, A/C & brake

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

55 Ton, Walsh #55, OBI punch press, 2-1/2" stroke, 10" SH, 9-1/4" throat, 5 HP, 95 SPM, #28238

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

55 Ton, Walsh #55, 2.5" stroke, 10" SH, 32" x 18" bed, 50-150 SPM, #27309

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

55 Ton, Walsh #55, OBI punch press, 2.5" stroke, variable speed drive, air counter balance

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Victory Machinery Exchange, Lake Forest, IL 847-918-9797 (Email: sales@victorymachinery.com) Bob or Neal

56 Ton, Johnson, 1" str, 20" x 30" bed, 11" SH, 120 SPM, A/C, 5hp, foot pedal oper, #102

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Diamond Jack Machinery Inc, Fort Smith, AR 479-785-2554 (Email: djm@diamondjackmachinery.com) Jack Yancey

56 Ton, Minster, 5" str., 11" SH, 3-1/2" t-slotted bolster 21" x 32", air clutch, #80771

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

58 Ton, Toledo #RB-153, 3" stroke, 11.375" SH, 2" ram adj., 30.5" x 22" bed, air clutch & brake, 90 SPM, remanufactured 1991, #13082J

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

58 Ton, Toledo, OBI press, 3" stroke, remanufactured by Precision Industries 1991

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

60 Ton, Aida, 5.9" stroke, 11.8" SH, 33" x 17" bed, 70 SPM, hydraulic OL, 1974, #sr4859

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

60 Ton, Bliss #C60, 3" str, 15" SH, 32" RL x 21" FB bed, 3" ram adj, dual palm buttons, 100 SPM

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

60 Ton, Bliss #C60, 3" stroke, 15.5" SH, 31" x 21" BA, 90-180 SPM, #4690

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

60 Ton, Bliss #C60, 3-1/2" stroke, 11-1/2" SH, 3" ram adj., A/C, palm buttons, 1960, #1794

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

60 Ton, Bliss #C60, 4" stroke, 14-1/4" SH, 3" ram adj., 32" x 21" bed, air clutch & brake, 1977

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

60 Ton, Bliss #C60, OBI press, 4" stroke, 3" adjustment, 14-1/4" SH, air clutch, Bijur auto lube system, 1977, #17078

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

60 Ton, Bliss #C60, 4" str, 14.25" SH, air clutch & brake, s/n #H60259, 1968, #154007

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

60 Ton, Bliss #C60, flywheel OBI press, 4" str, 15-1/4" SH, 3" adj, A/C & brake, 1995, #13541

  Photo
 Visit Dealer's Equipment Listings  RFQ
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

60 Ton, Bliss #C60, 4" stroke, 15.75" SH, 90 SPM, 32" x 21" bed, air clutch & brake, s/n #H64807, 1972, #30061

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

60 Ton, Bliss #C60, 4" stroke, needs ram & vee gibs, reasonable, rebuilt 1987, tag #14323

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

60 Ton, Bliss #C60, 8" str, 11.75" SH, 3" ram adj, 32" x 21" bed, auto lube, reconditioned

  Photo
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

60 Ton, Bliss #C60, OBI press, 4" stroke, 14-1/4" SH, 3" adjustment, 32" x 21" bed, 120 SPM, air clutch & brake, dual palm buttons, 1989

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

60 Ton, Bliss #C60, flywheel OBI press, 4" stroke, 14.25" Shut Height, 90 SPM, light curtains, recirculating lube, dual palm buttons, air clutch & brake, 1990, #10482

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

60 Ton, Bliss #C60, OBI gap frame press, 4" stroke, 14.25" SH, air clutch, 1990, #158909

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

60 Ton, Bliss #C60, 4" stroke, vari-drive, A.C. power inclinable, air counter-balance, 1975

  Spec Sheet
 RFQ
Kingsmen Machinery Co, Burnsville, MN 952-890-2419 (Email: kingsmenmachinery@msn.com) George Stensgard

60 Ton, Bliss, 3" str, 14" SH, 32" x 21" bed, 90 SPM, reconditioned, under power, video, #sr5188

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

60 Ton, Brown & Boggs #60, 5" stroke, 9.5" SH, 32" x 22.5" bed, 88 SPM, s/n #85167

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

60 Ton, Clearing #I-60, 4" stroke, 15-1/4" SH, 90 SPM, 32" x 21" bed, 5 HP

 
 RFQ
Long Machine Tool Co, Ferris, TX 972-842-2207 (Email: longmachinetoolco@gmail.com) Ray Long

60 Ton, Clearing #Torc-Pac-60T701, 4" str, 17-1/4" SH, 60 SPM, 3" adj, A/C, '73, #9688

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

60 Ton, Federal #2-60, 4" stroke, 13" SH, 54" x 24" bed, 60-180 SPM, A/C, 1982, #148055

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

60 Ton, Federal #60, OBI press, 4" stroke, 13" SH, serial #60-528, 1979

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

60 Ton, Federal #F-5, OBI punch press, 2" stroke, 13-1/4" SH, 90 SPM, 5 HP, #6397P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

60 Ton, Federal, 3" stroke, 15" SH, 32" x 21" bed, 125-250 SPM, 1980, recond'd, #sr3774

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

60 Ton, Federal, 4" stroke, 13.25" SH, air clutch & brake, 1973, #5622

  Photo Spec Sheet
 RFQ
A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Email: sales@ammetalmaq.com) Sales Dept.

60 Ton, Minster #6, OBI punch press, 2" stroke, 15" SH, 32" x 18" bed, 50-240 SPM, air clutch & brake, 10 HP, #27904

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

60 Ton, Minster #6, OBI punch press, 2" stroke, 15" SH, 32" x 18" bed, 50-240 SPM, air clutch & brake, 10 HP, #27905

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

60 Ton, Minster #6, OBI press, 3" stroke, 12.75" SH, 3" ram adj., 32" x 21" bed, air clutch & brake, 95 SPM, remanufactured 1992, #13083J

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

60 Ton, Minster #6, OBI press, 3" stroke, 13.5" SH, 2.75" power ram adjustment, 90-180 SPM, air clutch & brake, #13713J

  Photo Spec Sheet
 RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

60 Ton, Minster #6, OBI punch press, 3" str, 17" SH, 11" throat, 20-150 SPM, 1981, #7478HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

60 Ton, Minster #6, air clutch & brake, 3" stroke, 110-220 SPM, 32" x 21" bed, #8120HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

60 Ton, Minster #6, OBI, s/n #6-101-20938, 4" str., 13" SH, 2.75" ram adj., 90-180 SPM, 1973

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

60 Ton, Minster #6, s/n 6-16088, 4" stroke, 14" SH, 120 SPM, rebuilt, #1189

  Photo
 RFQ
Stamptech Inc, Southington, CT 860-628-9090 (Email: tony@stamptechinc.com) Tony Amato

60 Ton, Minster #6, 4" stroke, 17" SH, 32" x 21" bed, 90 SPM, nice Link controls, #5398

 
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

60 Ton, Minster #6, 4" stroke, pedestal mounted palm buttons, tie rods for extra strength, s/n #6-10544, used, #A4768

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

60 Ton, Minster #6, s/n #12355, 5" stroke, 13.5" SH, 3" adj., 32" x 21" bed, 120 SPM, 1967

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

60 Ton, Minster #6, OBI punch press, 6" stroke, 14" SH, 11" throat, 90 SPM, 10 HP, #7673HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

60 Ton, Minster #6, 6" str, 14" SH, 3" ram adj, 32" RL x 21" FB bed, 90 SPM, under power

  Photo
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

60 Ton, Minster #6, OBI press, 7" stroke, 18" SH, 32" x 21" bed area, 3" ram adj., 100 SPM VS, 1966, #13471J

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

60 Ton, Minster #6F, OBI flywheel press, 4" stroke, 13" SH, 120 SPM, A/C & brake, #51911

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

60 Ton, Minster #6F, 4" stroke, 16" SH, 3" ram adjust, 180 SPM, Wintriss SmartPAK controls

  Photo
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

60 Ton, Minster Super Stock #6SS, 5" str, 32" x 21" bed, 120 SPM, 2.75" ram adj, 1980, #5391

 
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

60 Ton, Minster Super Stock #6SS, OBS, 6" str, 13" SH, 2.75" ram adjust, 120 SPM, 2000, #5369

 
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

60 Ton, Minster #6, OBI, 5" str, 14.5" SH, 120 SPM, 1200 RPM, 7.5 HP, open back, 1991

  PDF icon
 Visit Dealer's Equipment Listings  RFQ
Nidec Press & Automation, Minster, OH 860-919-5436 (Email: rich.ruck@nidecpa.com) Rich Ruck

60 Ton, Minster #6, 5" str, 3" adj., 32" x 21" bed, 4" bolster, 3/4" t-slots, A/C, #10543

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

60 Ton, Minster #6036, OBI press, 5" stroke, 13.5" SH, 3" adj., 32" x 21" bed, air clutch & brake, 7.5 HP, 120 SPM, 1960, #12590J

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

60 Ton, Minster #70-4, 6" stroke, 14" SH, 32' x19" bed, 60-180 SPM, 1966, #sr4631

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

60 Ton, Minster #B1-60 Gap, 2" str, 32" x 21" bed, 150-300spm, 8" Vamco fd, recond, #sr4145

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

60 Ton, Minster #B1-60, flywheel gap press, 3" str, 12" SH, 3" adj, 125-250 SPM vari-speed, '76

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

60 Ton, Minster #B1-60, 3" stroke, 12" SH, air clutch & brake, s/n #21729, 1976, #155081

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

60 Ton, Minster #B1-60, 3" stroke, 12" SH, air clutch, vari-speed, s/n #21730, '76, #155080

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

60 Ton, Minster #B1-60, flywheel gap press, 3" stroke, 12" Shut Height, 125-250 SPM variable-speed, air clutch & brake, 1972, #9986

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

60 Ton, Minster #B1-60, 3" stroke, 12" SH, air clutch & brake, s/n #19819, 1972, #155082

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

60 Ton, Minster #B1-60, flywheel gap press, 3" stroke, 12" Shut Height, 125-250 SPM variable-speed, air clutch & brake, 1976, #9985

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

60 Ton, Minster #SS-6, 4" stroke, 16" SH, 33" x 21" bed, 60-120 SPM, 1978, #SR5562

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

60 Ton, Minster #SS-6 SuperStock, 4" stroke, 32" x 21" bed, 90 SPM, 1980, sr#4510

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

60 Ton, Minster, OBI press, remanufactured by Precision Industries 1992

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

60 Ton, Niagara #AF4S, 6" str, 16" SH, 3" adj., air clutch & brake, dual palm buttons, #5058

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

60 Ton, Niagara #E60, OBI, 3.5" stroke, 14" SH, 32" x 21" bed, 60 SPM, 1982

  Spec Sheet
 RFQ
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

60 Ton, Niagara #E60, OBI, 3.5" str, 14" SH, 3.5" adj., 32" x 21" bed, 45-90 SPM, #10789

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

60 Ton, Niagara #E60, 6" stroke, 18" SH, air clutch, good condition, s/n #51184

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

60 Ton, Niagara #M60, OBI fly wheel press, 3" str, 14.5" SH, 32" x 21" bed, 1973, #10826

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

60 Ton, Niagara #M60, OBI press, 4" str, 14" SH, 3" adj., 32" x 21" bed, A/C & brake, #10788

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

60 Ton, Perkins #650B, OBI press, 2.5" stroke, 11" SH, 3" slide adj., 31" x 20" bed area, air clutch & brake, Link 501 control, #13342J

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

60 Ton, Rousselle #6, OBI flywheel punch press, 3" stroke, 12-1/2" SH, 110 SPM, air clutch & brake, 1976, #17155

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

60 Ton, Rousselle #6, 18" x 30", 10" throat, 3" stroke, 5 HP, #82240

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

60 Ton, Rousselle #6, 3" stroke, 18" x 30" bed, air clutch & brake, tag #14228

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

60 Ton, Rousselle #6, OBI flywheel press, 6" stroke, 10" SH, 4" adjustment, 5 HP, #70272

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

60 Ton, Rousselle #6F, OBI press, 3" stroke, 21" throat, 12-1/2" SH, 110 SPM, air clutch, 1971, #3994

  Photo Spec Sheet
 RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

60 Ton, South Bend #60-W-FW-AC, OBI press, 3.5" stroke, 15-1/4" SH, 17" throat, 58-175 SPM, air clutch & brake, #13189J

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

60 Ton, South Bend #OB160, 3" stroke, 13" SH, 3-1/2" slide adj., air clutch/brake, #18618

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

65 Ton, Federal, 4" stroke, 32" x 25" bed, 10-1/2" SH, digital stroke counter, #82106

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

65 Ton, Walsh #65X, OBI press, 4" stroke, 11.5" Shut Height, variable SPM, air clutch & brake, 1966, #9737

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

65 Ton, Walsh #65X, 4" stroke, 15.5" SH, 32.5" x 18.5" bed, A/C & brake, 25-75 SPM, #27810

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

70 Ton, Havir / Pressrite #70, 4" stroke, 14" SH, 33" x 21" bed, 80 SPM, #sr5234

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

70 Ton, L & J #70, 1-1/2" stroke, 122 SPM, 15-1/2" SH, 36" x 26" bed, A/C & brake, 7-1/2 HP

  Spec Sheet
 RFQ
Long Machine Tool Co, Ferris, TX 972-842-2207 (Email: longmachinetoolco@gmail.com) Ray Long

70 Ton, Minster #70-4, 4" stroke, 12" SH, 3" ram adjust, 32" RL x 21" FB bed, 90 SPM

  Photo
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

70 Ton, Rousselle #G1-70, 6" str, 11" thrt, 11.5" SH, 2" adj., A/C & brake, 1997, #159004

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

75 Ton, Bliss #C75, OBI press, 4" str, 15" SH, 36" x 24" bed, 100 SPM, A/C & brake, '79, #19023L

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

75 Ton, Bliss #C75, OBI punch press, 4" stroke, 15" SH, 36" x 24" bed, A/C & brake, '74, #8010P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

75 Ton, Bliss #C75, OBI mech press, 4" str, 17" SH, 3.5" adj., 36" x 24" bed, A/C & brake

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Rygate, LLC, Clarkston, MI 248-709-6723 (Email: brian@rygatellc.com) Brian Bridgeman

75 Ton, Bliss #C75, OBI gap frame, 4" str., 36" x 24" bed, 13" thrt, 110 SPM constant, s/n H68968

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sanson Machinery Group, Kirkland, WA 425-513-8263 (Email: aduenas@sansonmachinery.com) Ryan Ross

75 Ton, Bliss #C75, 4" str, 3.5" adj., 36" x 24" bed, 85 SPM, A/C & brake, 1969, #10762

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

75 Ton, Bliss #C75, 6" str, 15" SH, SDAU, 3.5" adj., 36" x 24" bed, A/C & brake, gap frame

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Rygate, LLC, Clarkston, MI 248-709-6723 (Email: brian@rygatellc.com) Brian Bridgeman

75 Ton, Bliss #C75, 6" stroke, 15" SH, 3.5" adj, 36" LR x 28" FB bed, A/C, 45 SPM

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

75 Ton, Bliss #C75, OBI press, 6" str, 15.5" SH, 3.5" adj, 36" x 24" bed, A/C, 1978

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

75 Ton, Bliss #C75, A/C & brake, STI light curtains, 36" x 24" table., digital control, #6108

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

75 Ton, Bliss #C75, OBI press, serial #H65225, good condition, 1973, #1252

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

75 Ton, Bliss #I75, OBI, 6" str, 17.5" SH, 3" adj, 90 SPM, 24" x 36" bed, 14" thrt, A/C, #19332

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

75 Ton, Bliss OBI, 6" stroke, 15" SH, 42" LR x 26" FB bed area, bolster, air clutch, Tag #16031

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

75 Ton, Clearing, single geared, friction clutch, 4" str, 15-3/4" SH, 40 SPM, 1969, #9687

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

75 Ton, Minster #7, 3" stroke, 15" SH, 32" x 21" bed, 100 SPM, w/air feed, #sr4323

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

75 Ton, Minster #7, OBI press, 3" stroke, 4" ram adjustment, 15.5" DL, 150 SPM, 36" x 24" bed area, air clutch & brake, #13303J

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

75 Ton, Minster #7, OBI press, 4" stroke, 15" Shut Height, 36" x 24" bed area, 90 SPM, flanged ram, recircluating lube, air clutch & brake, 1972, #9276

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

75 Ton, Minster #7, 4" stroke, 15" SH, 90 SPM, air clutch & brake, 15 HP, #68400

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

75 Ton, Minster #7, OBI press, 4" stroke, 17.5" SH, 13" throat, air clutch & brake, #157499

  Photo Spec Sheet
 RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

75 Ton, Minster #7, OBI press, 4" str, 17.5" SH, 3.75" ram adj., 36" x 24" bed, A/C & brake

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

75 Ton, Minster #7 Dienamic, 4" stroke, 21" Shut Height, 36" x 21" bed, 90-180 SPM, 1978

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

75 Ton, Minster #7, 4" str, 21" SH, 3" adj, A/C & brake, OBI mech press, 36" x 24" bed

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Rygate, LLC, Clarkston, MI 248-709-6723 (Email: brian@rygatellc.com) Brian Bridgeman

75 Ton, Minster #7, OBI, 4" str, 21" SH, 3" adj, 90 SPM, 36" x 24" bed, 30" x 17" ram, A/C

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

75 Ton, Minster #7, 6" str, 15.5" SH, 3.75" adj, 36" x 24" bed, A/C & brake, gap frame mech press

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Rygate, LLC, Clarkston, MI 248-709-6723 (Email: brian@rygatellc.com) Brian Bridgeman

75 Ton, Minster #7, OBI Press, 6" str, 15.5" SH, 3.75" adj, 36" LR x 24" FB, A/C, 90 SPM

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

75 Ton, Minster #7, OBI punch press, serial #22907, #6393P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

75 Ton, Minster #70-4-1/2, OBI press, 4" stroke, 3" ram adjustment, 70 SPM, 36" x 24" bed area, air clutch & brake, #13455J

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

75 Ton, Niagara #E75, OBI, 4" stroke, 15.75" SH, 36" x 224" bed, 82 SPM, 1978

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

75 Ton, Niagara #E75, 6" str, 13.75" SH, 4" adj, 36" x 24" bed, OBI mech.press, A/C & brake

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Rygate, LLC, Clarkston, MI 248-709-6723 (Email: brian@rygatellc.com) Brian Bridgeman

75 Ton, Niagara #E75, 6" str, 13.75" SH, 4" adj, 36" x 24" bed, A/C, 40 SPM, light curtain

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

75 Ton, Niagara #E75, air clutch & brake, auto lube, air counter balance, power ram adj., 7-1/2 HP, #6332

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

75 Ton, Niagara #M75, OBI punch press, 4" stroke, 15-3/4" SH, air clutch & brake, 12-1/2" throat, 7.5 HP, 80-160 SPM, #28044

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

75 Ton, Niagara #M75, 5" str, 14-3/4" SH, 3-3/8" adj, 90 SPM, 12.5" thrt, 7.5 HP, #14504

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

80 Ton, Federal #7, 4" str., 15" thr., 75 SPM, 3" adj., 28" x 36" bed, air clutch/brake, 1974

  Photo
 Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

80 Ton, Federal #7, OBI press, 4" stroke, serial #7-763

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

80 Ton, Federal #7 OBI, 6" stroke, 28" x 36" bed area, 19-1/2" SH, bolster, air clutch, Tag #16032

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

80 Ton, Federal #7, 9" str, 14" SH, 38" x 28" T-Slotted bolster, updated PCI-100 Cieco controls

  Photo
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

80 Ton, Federal #7, OBI punch press, 12" stroke, 20-1/2" shut height

 
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

80 Ton, Federal #7, air clutch & brake, air counter balance, auto lube, dual palm control, 7-1/2 HP, #8149

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

80 Ton, Federal, 4" str, 13.5" SH, 36x28" bed, 35-75 SPM, reconditioned, under power, #sr5043

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

80 Ton, L & J #80, 3" stroke, 14.25" SH, 36" x 26" bed, air clutch & brake, 30-100 SPM, #27823

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

80 Ton, Metalis #C1-80, 6" stroke, 35" x 24" bed, air clutch & brake, rebuilt 1994, tag #13912

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

80 Ton, Rousselle #8, OBI punch press, 4" stroke, 12" SH, 36" x 24" bed area, air clutch & brake, 50 SPM, 7.5HP, dual palm buttons, #18575

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

80 Ton, South Bend Johnson #80-FW-AC, 6" str, 10" SH, 3.5" adj, 36" LR x 24" FB, 85 SPM

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

80 Ton, South Bend Johnson #80FW-AC, flywheel, 4" str, 15.5" SH, 36" x 24" bed, 85 SPM, A/C

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

80 Ton, South Bend Johnson #80FW-AC, OBI, 4" str, 15.5" SH, 3.5" adj, A/C & brake, 1981

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

85 Ton, Press-Rite, 2" str, 12" SH, 36" x 22" bed, 145 SPM, A/C, recond, under power, '67, #sr4311

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

85 Ton, Rousselle #8, OBI punch press, 4" stroke, 18" SH, 13" throat, 100 SPM, #7196

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

85 Ton, Rousselle #8, press, 6" stroke, 17" SH, 100 SPM, 4" adj, 36" x 24" bed

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

90 Ton, L & J, OBI, 4" str, 16.5" SH, 38" x 28" bed, 80 SPM, 1990, Recond, #sr4749

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

90 Ton, Minster #70-5, 4" stroke, 40" x 26" bed, 15" SH, 35-70 SPM, air clutch & brake

  Spec Sheet PDF icon
 Visit Dealer's Equipment Listings  RFQ
Nidec Press & Automation, Minster, OH 860-919-5436 (Email: rich.ruck@nidecpa.com) Rich Ruck

90 Ton, Niagara #AF5, 10" str, 26" SH, 39" x 25" bed, 30-60 SPM, A/C & brake, OBI mech press

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Rygate, LLC, Clarkston, MI 248-709-6723 (Email: brian@rygatellc.com) Brian Bridgeman

90 Ton, Niagara #AF5, 10" str, 26" SH, 3.75" adj, 39" LR x 25" FB, A/C, 30-60 SPM

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

90 Ton, Niagara #E90, 7" stroke, 19.5" SH, air cushion, A/C, transverse mounted crankshaft, 1985

  Photo Spec Sheet
 RFQ
O'Connell Machinery Co, Buffalo, NY 716-877-3666 (Email: sales@oconnellmachinery.com) W. O'Connell

90 Ton, Niagara #M90, 8" stroke, 14" SH, air clutch, SLC500 PLC, 40 RPM, #1142

  Photo
 RFQ
Icon Industries, Inc, Grand Rapids, MI 616-241-1877 (Email: sales@iconindustries.com) Tom,Pete,Bob

90 Ton, Verson #7, OBI press, 6" stroke, 17" SH, air clutch, 45 SPM, die cushion, 1970

  Photo
 RFQ
Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: carl.amick@machinerysolutions.com) Carl Amick

95 Ton, Heim #G1-95, wedge roll line, 3" str, 14" SH, 4" adj, 100 SPM, AB Panelview 550 controls

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

95 Ton, Rousselle #G1-95, 3" str, 14" SH to bed, 39" RL x 25" FB bed, 100 SPM, '97, #5039

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

95 Ton, Rousselle #G1-95, 3" stroke, 14" SH, 4" ram adj, 36" x 26" Bed, AB controls, #5030

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

95 Ton, Rousselle #G1-95, gap flywheel, 4" str, 17.5" SH, 36" x 27" bed, 1995, #sr5727

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

100 Ton, Bliss #C100, OBI press w/die set, 4" stroke, 16-1/2" SH, #2732E

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Email: sales@utubeonline.com) Sales Dept.

100 Ton, Clearing OBI press, #71797

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

100 Ton, Federal #8, 1" str, 15.5" SH, 2.5" ram adj, 36" x 28" bed, 40 SPM, AB controls

 
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

100 Ton, Federal #8, OBI press, 4" stroke, 15" throat, air clutch & brake, 45 SPM, 1966

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

110 Ton, Bliss #C-10, OBI punch press, 26" x 50" bed size, 6" stroke, 40 SPM

 
 RFQ
Toledo Press Industries, Wayne, MI 734-727-0605 (Email: andy@toledopress.com) Andrew Blakely

110 Ton, Bliss #C-110, OBI press, 4" stroke, 18" SH, 4" ram adjustment, 42" x 27" bed, 75-150 SPM, air clutch & brake, #13855T

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

110 Ton, Bliss #C-110, 6" stroke, 40 SPM, 42" x 27" bed, 19" SH, auto lube, 1984

 
 Visit Dealer's Equipment Listings  RFQ
Tom Hale Equipment Co. Inc, Crossville, TN 931-250-6181 (Email: tomhaleequipment@gmail.com) Tom Hale

110 Ton, Bliss #C-110, OBI press, 8" str, 17" SH, 42" x 27" bed, air clutch & brake, '96, #8258P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

110 Ton, Bliss #C-110, 10" str, 19" SH, 4" adj., 40 SPM, 42" x 27" bed, A/C & brake, s/n#H59999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

110 Ton, Clearing #110, OBI press, 8" stroke, 20" SH, 45 SPM, air clutch & brake

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

110 Ton, Danly #110, 6" str, 18" SH, 42" x 27" bed, 90 SPM, 3.5" mtrzd ram adjust, A/C & brake

  Photo
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Email: info@almamachinery.com) Jim Walters

110 Ton, Federal #110, OBI punch press, air clutch & brake, power ram adjustment, #6050

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

110 Ton, Verson #AF3, w/cushion & feeder, 42x27" bed, 10" str, 20" SH, 5" ram, 14-3/8" thrt

  Photo
 RFQ
Gibbs Industries Ltd, Royal Oak, MI 248-680-1000 (Email: sales@gibbsind.com) Jamie Gibbs

125 Ton, Bliss OBI press, 10" stroke, 15" SH, air clutch, cushion, #11050

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

125 Ton, Federal, OBI punch press, 5" str, 17" SH, 3" adj, air clutch, 80 SPM, remanufactured

  Photo
 RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

150 Ton, Bliss #C2-150, OBI press, 84" x 30" bed size, 8" stroke, 22.5" SH, 40 SPM

  Photo
 Visit Dealer's Equipment Listings  RFQ
Toledo Press Industries, Wayne, MI 734-727-0605 (Email: andy@toledopress.com) Andrew Blakely

150 Ton, Bliss, 8" str, 22" SH, 50" x 30" bed, 35-70 SPM, recond, under power, video, '64, #sr5426

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

150 Ton, Niagara, OBI press, 50" x 30", s/n 41685, 32 SPM, 18" SH, 6" stroke, 6" ram adj.

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

150 Ton, South Bend Johnson #150BG-AC, OBI press, 6" stroke, 22" SH, 25-35 SPM, air clutch, forward/reverse

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

150 Ton, Verson #150-OBI, OBI press, 8" stroke, 33" SH, 35 SPM, air clutch & brake

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

180 Ton, V & O #180ST, OBI press, 4" stroke, 15" SH, 90 SPM, air clutch & brake

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

200 Ton, Bliss #C-200, 8" str, 24" SH, 4.5" adj, 58" x 34" bed, OBI mech press, A/C & brake

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Rygate, LLC, Clarkston, MI 248-709-6723 (Email: brian@rygatellc.com) Brian Bridgeman

250 Ton, Bliss, 1.5" stroke, 24" SH, 58" x 34" bed, 65-124 SPM, recond, under power, #sr5173

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

400 Ton, Erfurt, C-frame press, 5.5" stroke, 20" SH

  Photo Spec Sheet
 RFQ
Mauldin Machine Inc, Jacksonville, AR 501-835-5494 (Email: mail@mauldinmachine.com) Jerry Mauldin

V & O #45 Super T, high speed, 2" stroke, 14" SH, 3" adjustment, 125-250 SPM, 1976

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
R A B Industries Inc, Washington, MI 586-752-0090 (Email: rabind@comcast.net) Rod A Blasius

Back to Machinery & Machine Tool listings.


Photo = photo available    Spec Sheet icon = spec sheet available    PDF icon = PDF available    RFQ icon = request quote from seller    Video = video available    web site icon = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise