Browse: Machinery Electrical

Instagram

Surplus Record

Machinery & Equipment >

Presses, Gap Frame, Single Crank

PRESSES, GAP FRAME, SINGLE CRANK

S & G Press & Machinery Sales

There are 257 listings in this category
Update: Fri, Mar 5, 2021 19:28:55

Advanced Search

Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added

Original Sort

8 Ton, Denison #FG8, hydraulic gap frame press,12"stroke,18"DL,34.5"x14"bed,#18181

Spec Sheet

RFQ

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

15 Ton, Perkins #15S, high speed gap frame press, 2.5"electro-can feeder, 1.5"stroke, 7"SH, 20"x10"bed, #28754

Spec Sheet

RFQ

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

15 Ton, Perkins #15S, high speed gap frame press, part feeder, 1.5"stroke, 7"SH, 20"x10"bed, #28753

Spec Sheet

RFQ

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

15 Ton, Perkins #15S, high speed gap frame press, air clutch & brake, 1.5"stroke, 7"SH, 20"x10"bed, #28755

Spec Sheet

RFQ

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

15 Ton, Perkins #15S, 1.5" stroke, 7.75" SH, 20" x 10" bed, 100-300 SPM, air clutch & brake, 3 HP, s/n #44935, 1981, #29730

RFQ

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

15 Ton, Perkins #15S, gap frame press, 1-1/2" stroke, 7-3/4" SH, air clutch & brake, 100-300 SPM

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

15 Ton, Perkins #15S, high speed gap frame press, 1.5" stroke, 7" SH, air clutch & brake, 1973

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

15 Ton, RDS #Workhorse-15, C-frame press, .32" -2.50" stroke, rebuilt, #1265

RFQ

Stamptech Inc, Southington, CT 860-628-9090 (Email: tony@stamptechinc.com) Tony Amato

20 Ton, Chin Fong #CAF-20H, gap frame press, 200-400 SPM, palm buttons, 2006

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

20 Ton, Chin Fong #CAF-20H, gap frame press, 1.18" stroke, 7.67" shut height, 1.96" ram adj., 20.86" x 12.2" bed, 200-400 SPM, palm buttons, 2006

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

22 Ton, Minster #B1-22, fixed base gap frame press, 1.25"stroke, 20" x 12"bed, #28752

Spec Sheet

RFQ

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

22 Ton, Minster #B1-22, 1-1/4"stroke,7"SH,2"adjustment,55 PSI,5 HP,air clutch,air brake,work light,S/N 14022

Spec Sheet

RFQ

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

22 Ton, Perkins #22S, gap frame press, 1-1/2" stroke, 7-1/2" SH, 7" throat, 39" x12" bed

Spec Sheet

RFQ

Bullseye Industrial Sales LLC, Middlebury, IN 574-825-4990 (Email: jeremy@bullseyeindustrialsales.com) Jeremy Wingard

22 Ton, Perkins #22S, 2" stroke, 7" SH, 22" x 12" bed, 200-800 SPM, air clutch & brake, 3 HP, nice, s/n #41184, 1974, #29745

RFQ

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

22 Ton, Perkins #22S, 2" stroke, 7" shut height, 22" x12" bed, variable speed 200-800 SPM, air clutch & brake, 3 HP, s/n #39423, 1972, #29465

RFQ

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

22 Ton, Perkins #22S, 2"stroke, 7"SH, air clutch & brake, good, s/n #39423, 1973

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

22 Ton, Perkins #22S, 2"stroke, 7"SH, 12" x 22"bed, 200-800 SPM, air clutch & brake

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

22 Ton, Precision Industries #22N, gap frame press, 2.5" stroke, 14" SH, air clutch, 150 SPM

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

25 Ton, Niagara #M-22-S, gap frame press,4"stroke,7.5"SH,2"ram adj.,air clutch & brake,palm buttons,150 SPM,1989,#13878J

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

25 Ton, Rousselle #3F, deep throat OBI punch press, 2" stroke, 10-3/4" Shut Height, air clutch & brake, #28542

Spec Sheet

RFQ

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

25 Ton, Rousselle #3G, gap frame press, 2" stroke, 10-3/4" SH, air clutch & brake, 135 SPM

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

25 Ton, Rousselle #3G, gap frame OBI punch press, 3"stroke, 18"throat, #7809

Spec Sheet

RFQ

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

25 Ton, Smeral Toma Len #25C, gap frame press, 22" x17" bed, 75-155 SPM, 3 HP, 1998

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

27.5 Ton, Stamtec #OCP-25, gap frame press, 3.94" stroke, 9.06" die hght, 55-100 SPM, 2005

Spec Sheet

RFQ

Wenco Machinery Corp, Ringwood, NJ 888-439-3626 (Email: eric@wencomachinery.com) E. Schouten

28 Ton, Seyi #SN1-28-S, 3.15" stroke, 70-120 SPM, new press (2 Available)

RFQ

Stamptech Inc, Southington, CT 860-628-9090 (Email: tony@stamptechinc.com) Tony Amato

30 Ton, Precision Flexopress #MC30, gap frame press, 2.5" stroke, 10" SH, air clutch, 0-400 SPM

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

32 Ton, Minster #4SS, gap press, 4" stroke, 15" shut height, 2.25" ram adjustment, 90-180 SPM variable, 24" x16" bed, knock out, 7-1/2 HP, air clutch & brake, 1995, #10285

Spec Sheet

RFQ

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

32 Ton, Minster #4SS-FB, high speed, 2" stroke, 12.5" SH, 24" x32" bed, air clutch, 1988, #8887HP

RFQ

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

32 Ton, Minster #B1, serial #20751, 1.5" stroke, 11" SH, 24" x 15" bed, 0-400 SPM, 1974

Spec Sheet

RFQ

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

32 Ton, Minster #B1-32, hi-speed gap frame press, s/n 15811, 1.5" stroke, 0-600 SPM, remanufactured

RFQ

Stamptech Inc, Southington, CT 860-628-9090 (Email: tony@stamptechinc.com) Tony Amato

32 Ton, Minster #B1-32, high speed gap frame press,1.5"str,s/n 13556,remanu,#1130

RFQ

Stamptech Inc, Southington, CT 860-628-9090 (Email: tony@stamptechinc.com) Tony Amato

32 Ton, Minster #B1-32, high speed gap frame press, 1.5" stroke, 11" SH, 2.25" adj., air clutch & brake, 1967, #11256

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

32 Ton, Minster #B1-32, 1.5" stroke, 11" shut height, 2.25" ram adj, 50-400 SPM, air clutch & brake, 1973

Spec Sheet

RFQ

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

32 Ton, Minster #B1-32, gap frame press, 1.5" stroke, 11" SH, air clutch & brake, 0-400 SPM

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

32 Ton, Minster #B1-32, s/n 12234, 2.5" stroke, 0-400 SPM, 9" SH, 15" x24" bed, remanufactured, #1179

RFQ

Stamptech Inc, Southington, CT 860-628-9090 (Email: tony@stamptechinc.com) Tony Amato

34 Ton, Niagara #AH3PL, gap frame horn press, 3" stroke, 5-1/2"-13-1/2" shut height, 120 SPM, 24" x 15" bed, air clutch & brake, 1964, #9972

Spec Sheet

RFQ

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

35 Ton, Bliss #C35, 3"stroke, 11-3/4"SH, 26" x 17"bed area, air clutch, light curtains, 1998

RFQ

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

35 Ton, Stamtec #G1-35, Gap Frame Open Back Press, 2.76" stroke, 8.6" shut height, 8" throat, 40-120 SPM, 2008

Spec Sheet

RFQ

Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Andrew / Jonathan

35 Ton, Stamtec #G1-35, gap frame press, 2.76" stroke, 8.661" SH, air clutch, 40-120 SPM, 1999

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

38 Ton, Komatsu #OBS35B, 3"stroke, 30-75 SPM, 27"x 15"bed area, 1980, Tag #15871

RFQ

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

38 Ton, Stamtec #OCP-35, gap frame press, 4.33" stroke, 9.26" SH, 2.17" ram adjustment, 50-90 SPM, air clutch, palm buttons

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

40 Ton, Rousselle #4G, deep throat,3"stroke,12-1/2"SH,26"x16"bed,24"throat,3 HP,#27980

Spec Sheet

RFQ

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

40 Ton, Rousselle #4G, deep throat press, 3" stroke, 14" SH, 26" x16" bed, 105 SPM, air clutch, #28181

Spec Sheet

RFQ

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

40 Ton, Seyi #Mark-40-1, single point gap frame press, 2.39" stroke, 8.66" shut height, 2" adjustment, 70-130 SPM, air clutch & brake, 2003, #14034J

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

45 Ton, Bliss #C-45, OBI press, 4.5" stroke, 11.75" SH, 3" ram adjustment, 90 SPM, air clutch & brake, #14019J

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

45 Ton, Komatsu #OBS-45, 3.9" stroke, 9.8" shut height, 80 SPM, 27" x 17" bed, 1979, #17034

RFQ

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

45 Ton, Komatsu #OBS-45, 3.94" stroke, 80 SPM, 27.56" x17.72" bed, 9.84" shut height, air clutch & brake, 1979, #5946

Spec Sheet

RFQ

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

45 Ton, Komatsu #OBS-45-3, single crank gap frame press, 3.94" stroke, 9.84" SH, 3.94" adj., 50-100 SPM, air clutch & brake, 1991

Spec Sheet

RFQ

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

45 Ton, Komatsu #OBS-45-3, sgl point gap frame press,3.94"str.,9.84"SH,3.94"adj.,31.5"x17.17"bed,A/C,50-100 SPM,1991,#13840J

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

45 Ton, L & J, 3"stroke,10.5"SH,28" x 18"bed,vari-speed drive,brake monitor,#27516

Spec Sheet

RFQ

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

45 Ton, L & J, gap frame press, #73351

RFQ

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

45 Ton, Minster #5, OBI punch press,3"str,8.5"SH,28"x18"bed,90 SPM,A/C & brake,#27637

Spec Sheet

RFQ

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

45 Ton, Minster #5SS, gap frame hi-speed punch press, 2" stroke, air clutch & brake, #5879HP

Spec Sheet

RFQ

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

45 Ton, Minster #70-3.5 Gap, 5" stroke, 13.75" SH, 7.75" throat, 60-120 SPM, air clutch, 10 HP, #8380P

Spec Sheet

RFQ

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

45 Ton, Minster #B1-45, flywheel gap press, 2" stroke, 10.75" shut height, 2.75" ram adjustment, 150-400 SPM variable, air clutch & brake, 1968, #9988

Spec Sheet

RFQ

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

45 Ton, Precision Ind #45G, OBI press,3"stroke,11"SH,68 SPM,air clutch & brake

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

49 Ton, Stamtec #CAF-45H, high speed gap press,1.5"stroke,100-400 SPM,air clutch & brake,7.5 HP V/S,2002,#13452J

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

49 Ton, Stamtec #G1-45-14, 1.97"stroke, 10.04"SH, 50-150 SPM, 34"x 17.5"bed

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

49 Ton, Stamtec #G1-45S, 3.15"stroke, 9.45"SH, 40-100 SPM, 33.4"x 17.3"bed

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

49.5 Ton, Komatsu #OBS45-S, gap frame press, 3.9"stroke, 14.2"SH, 31.5" x 17.7"bed, 50-100 SPM, 5 HP, new, S36682

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

50 Ton, Heim #5-OBI-F, flywheel OBI press, 4" stroke, 12-1/2" shut height, 4" adjustment, 120 SPM, 28" x18" bed, air clutch & brake, 1982, #7591

Spec Sheet

RFQ

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

50 Ton, Heller Sutherland #Mark-50, 4.3" stroke, 10.6" die height, 2.3" adj., 33" x 17.3" bed, 50-85 SPM variable, 1979

Spec Sheet

RFQ

Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

50 Ton, Heller Sutherland #Mark-50, gap press,4.3"stroke,33"x17.3"bed,1998,#10564

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

50 Ton, Heller Sutherland #Mark-50, gap press,4.3"stroke,33"x17.3"bed,1998,#10563 (2)

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

55 Ton, Rockford, 4"stroke, 11.5"SH, 32" x 19"bed, 50 SPM, #27240

Spec Sheet

RFQ

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

55 Ton, Walsh #55, 2.5"stroke, 10"SH, 32" x 18"bed, 50-150 SPM, #27309

Spec Sheet

RFQ

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

56 Ton, Johnson #5, 4"stroke,11.5"SH,30"x 18.5"bed,free standing control,#27222

Spec Sheet

RFQ

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

60 Ton, Bliss #C60, flywheel OBI press, 4" stroke, 14-1/4" shut height, 90 SPM, light curtains, recirculating lube, palm buttons, air clutch & brake, 1990, #10482

Spec Sheet

RFQ

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

60 Ton, Federal #5, OBI punch press,4"str,12-1/2"SH,5 HP,47 SPM,A/C & brake,#27505

Spec Sheet

RFQ

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

60 Ton, Komatsu #OBS-60, 4.72" stroke, 11.81" shut height, 31.5" x21.65" bed, 70 SPM, air clutch & brake, lube system, 1980

RFQ

Rygate, LLC, Clarkston, MI 248-709-6723 (Email: brian@rygatellc.com) Brian Bridgeman

60 Ton, Komatsu #OBS-60, 4.72"str,11.81"SH,2.76"adj,31.5" x 21.65" bed,A/C,70 SPM

Spec Sheet

RFQ

S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

60 Ton, Komatsu #OBS-60-2, OBS press, 4" stroke, 11" shut height, 2.75" adj., 70 SPM, 35" x21" bed

RFQ

Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp

60 Ton, Minster #6SS, gap press,3"stroke,16.5"SH,120 SPM,32"x21"bed area,air clutch & brake,auto lube,palm buttons,1995

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

60 Ton, Minster #70-4, gap frame, 3" stroke, 13" shut height, 3" adj, 180 SPM, air clutch & brake, #8866HP

RFQ

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

60 Ton, Minster #B1-60, gap frame press,2"stroke,0-300 SPM,remanufactured,#1266

RFQ

Stamptech Inc, Southington, CT 860-628-9090 (Email: tony@stamptechinc.com) Tony Amato

60 Ton, Minster #B1-60, 3" stroke, 3" slide adjustment, 13" SDAU, 32" x21" bed, 0-200 SPM

Spec Sheet

RFQ

Wenco Machinery Corp, Ringwood, NJ 888-439-3626 (Email: eric@wencomachinery.com) E. Schouten

60 Ton, Minster #B1-60, flywheel gap press, 3" stroke, 12" shut height, 125-250 SPM variable-speed, air clutch & brake, 1976, #9985

Spec Sheet

RFQ

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

60 Ton, Minster #B1-60, flywheel gap press, 3" stroke, 12" shut height, 3" ram adjustment, 125-250 SPM variable speed, air clutch & brake, 1976, #9984

Spec Sheet

RFQ

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

60 Ton, Minster #B1-60, flywheel gap press, 3" stroke, 12" shut height, 125-250 SPM variable-speed, air clutch & brake, 1972, #9986

Spec Sheet

RFQ

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

60 Ton, Niagara #B3-1/2X60, gap frame press, 5" stroke, 10-1/4" SH, air clutch & brake, #73863

Spec Sheet

RFQ

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

60 Ton, South Bend Johnson #60FW-AC, OBI press, 6" stroke, 17.5" SH, 100 SPM, air clutch & brake

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

60 Ton, Stamtec #G1-60 gap frame press, 4.728" stroke, air clutch, 35-90 SPM, 7-1/2 HP, dual palm buttons, auto lube system, #72886

Spec Sheet

RFQ

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

66 Ton, Aida #NC1-60(2), 5.51"stroke, 11.8"SH, 45-85 SPM, air clutch & brake, good

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

66 Ton, Aida #PP-1GC-55SU, gap frame press, 5.9" stroke, 11.81" SH, air clutch & brake, 60 SPM

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

66 Ton, Komatsu #H1F-60, Servo gap frame press,4.72"str,11.81"SH,SIT IV ctrl,#S30866

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

66 Ton, Komatsu #H1F-60CH, Servo gap frame press,2.36"str,11.81"SH,SIT IV ctrl,#S30867

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

66 Ton, Komatsu #OBS-60, OBS press,3.54"stroke,11.8"SH,11.6"throat,70-150 SPM,1980,#13796J

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

66 Ton, Komatsu #OBS-60, 4.7"stroke,11.81"SH,35"x22"bed,70 SPM,nice,1989-1991 (7)

RFQ

North American Machy Sales, Philadelphia, PA 215-332-3200 (Email: sales@northamericanmachinery.net) Hyman/Putney

66 Ton, Komatsu #OBS-60-2, 3.54" stroke, 11.81" die hght, 2.76" adj., 75-150 SPM, 1984, #10990

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

66 Ton, Komatsu #OBS-60-2, gap frame press, 3.54" stroke, 11.81" SDAU, 75-150 SPM, 1984

Spec Sheet

RFQ

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

66 Ton, Komatsu #OBS-60-3, 3.54" stroke, 16.9" SH, 2.76" adj., 35.4" x21.7" bed, 75-150 SPM, 1996

Spec Sheet

RFQ

Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

66 Ton, Komatsu #OBS-60-3, gap frame, 4.7" stroke, 11.6" SH, 42-85 SPM, 1987, #14081T

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

66 Ton, Komatsu #OBS-60-3, gap frame,42-85 SPM,4.7"str,air clutch & brake,'89,#1892

Spec Sheet

RFQ

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

66 Ton, Komatsu #OBS-60S-VS-34, gap frame press,4.7"stroke,SIT IV ctrls,new,S36183

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

66 Ton, Seyi #Mark-66, single point gap frame press, 5.1" stroke, 11.8" shut height, 2.8" adjustment, 45-85 SPM, air clutch & brake, 2004, #14032J

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

66 Ton, Seyi #Mark-66-W, single point gap frame press, 5.1" stroke, 11.8" shut height, 2.8" adjustment, 40-75 SPM, air clutch & brake, 1998, #14033J

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

66 Ton, Seyi Sutherland #Mark-66W, 3.1" stroke, 10.5" SH, 35" x 21" bed, 1998, (2 available)

Spec Sheet

RFQ

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

66 Ton, Seyi Sutherland #Mark-66W, gap press,3.1"stroke,10.5"SH,55-110 SPM,A/C

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

66 Ton, Sutherland #FCP-60, 2" stroke, 11.22" SH, 35.43" x 20.47" bed, 70-150 SPM, 2000

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

66 Ton, Sutherland #FCP-60, 2" stroke, 11.2" shut height, 35" x 21" bed, 70-150 SPM, 2001

Spec Sheet

RFQ

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

66 Ton, Sutherland #FCP-60, 8" stroke, 10" shut height, 3" adj., 55-110 SPM, 20" x36" bed, air clutch, 1999

RFQ

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

66 Ton, Sutherland #FCP-60OBS, gap frame press, 3.14" stroke, 10.63" SH, air clutch, 1999

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

66 Ton, Sutherland #Mark-66 Auto Stamper punch press, 5.11" stroke, 12-3/4" x 21-3/4" bed, 45-85 SPM, 7.5 HP, air clutch with ghear box drive, dual palm buttons, 2004

Spec Sheet

RFQ

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

66 Ton, Sutherland #Mark-66-2, sgl crank gap frame press,4.72"str,I-Press ctrl,S33515

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

66 Ton, Sutherland #Mark-66-2, gap frame press, 5.11" stroke, 15" shut height, 2" adj., 45-84 SPM, 19.68" x38.1" bed, air clutch, 2002

RFQ

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

70 Ton, Bliss #C-70, gap press, 4"stroke, 15-1/4"SH, 71-140 SPM, air clutch & brake, auto lube system, 1998, #13877J

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

70 Ton, Vaptsarov, gap frame press, adj stroke, 16" SH, air clutch & brake, 50 SPM

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

75 Ton, Aida #PC-7(2), single crank gap frame press, 6.2" stroke, air clutch & brake, 55 SPM, #59297

Spec Sheet

RFQ

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

75 Ton, Aida #PP-XGC-75SU ,punch press,6.3"str.,12.60"SH,37"x20"bed,2-3/4"str. adj.

Spec Sheet

RFQ

Sanson Machinery Group, Kirkland, WA 425-513-8263 (Email: aduenas@sansonmachinery.com) Ryan Ross

75 Ton, Minster #7, 5"stroke, 20.5"SH, 60 SPM, 36"x 24"bed, 1998, (9) available

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

75 Ton, Minster #7 OBS press, 5" stroke, 17" SH, 3.75" slide adjustment, 45-90 SPM, 36" x 24"bolster area, 30" x 17"ram area, new controls

Spec Sheet

RFQ

Midwest Press & Automation LLC, Lansing, MI 586-212-1937 (Email: ronmichon@mpallp.com) Ronald Michon

75 Ton, Minster #OBS-7, gap frame press, 5" stroke, 20.5" SH, air clutch & brake, 60 SPM, 1998

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

75 Ton, Minster #7 OBS press, 5" stroke, 20.5" SH, 3.5" ram adjustment, 36" x 24"bed area, 26" x 16"ram area, 60 SPM, air clutch & brake, air counterbalances, back geared, 1997

Spec Sheet

RFQ

Midwest Press & Automation LLC, Lansing, MI 586-212-1937 (Email: ronmichon@mpallp.com) Ronald Michon

75 Ton, Neff #DF75-15M, 10" stroke, 14" throat, 30" DL, 28"work ht,11 HP, 2004,#10625

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

80 Ton, Alceco #88DC, gap press, 3"str,16"SH,118"BH,15"thr,3"adj., 10 HP, A/C, #10935

RFQ

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

80 Ton, Brown & Boggs #18LJA, 4"stroke, 18"SH, 36"x 25"bed, #26504

Spec Sheet

RFQ

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

80 Ton, Komatsu #OBS-80-2 gap frame press, 6.299" stroke, air clutch & brake, 13.189" shut height, dual palm buttons, auto lube system, 7-1/2 HP, 1981, #72884

Spec Sheet

RFQ

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

80 Ton, Stamtec #G1-80, gap frame press, 5.91" stroke, 13" sh, air clutch, 7.5 HP, 35-80 SPM, dual palm buttons, auto lube system, #728887

Spec Sheet

RFQ

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

88 Ton, Aida #NC1-80(2), single crank gap frame press, 1.5" slide stroke, 3" slide adjustment, 30-60 SPM, wet clutch & brake, level pads, die block plug, control console, S33174

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

88 Ton, Aida #NC1-80, gap press, 6.29"str,12.59"SH,3.04"ram, 37.4"x18.1"bloster,1989

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

88 Ton, Aida #NC1-80(2), gap frame press, 6.29" stroke, 12.59" SH, 40-70 SPM, 10 HP

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

88 Ton, EBU Burkhardt #H80, 30" x24" bed, 5.5" stroke, 13.5" shut height, wet type air clutch, 2010, #8267P

Spec Sheet

RFQ

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

88 Ton, Komatsu #80 KOM OBS, gap frame press, 10"-12.88"SH, 5.9"stroke,#69655

RFQ

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

88 Ton, Komatsu #OBS-80S-VS-61, gap frame press,5.12"stroke,SIT-IV ctrl,new,S36180

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

88 Ton, Niagara #BN-80-1, gap frame press, 6" stroke, 19" SH, air clutch & brake, 70 SPM, 1992

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

88 Ton, Niagara #BN-80-OBS, 6" stroke, 19" shut height, 36" x24" bed, air clutch, 1990, #7896HP

Spec Sheet

RFQ

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

88 Ton, Pressworks #OBG-80G, mech,5-7/8"str,Cieco PCI-100,4"adj,75spm,'01,#82155

Spec Sheet

RFQ

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

88 Ton, Seyi Sutherland #Mark-88, gap frame press,5.91"stroke,A/C & brake,#10510

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

88 Ton, Seyi #Mark-88, gap frame press,air clutch & brake,s/n EN80-606,#13714T

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

88 Ton, Stamtec #G1-80-S, open back gap frame press, 5.96" stroke, 12.897" die height, 21" x 14.9" bed opening, #29206

Spec Sheet

RFQ

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

88 Ton, Stamtec #OCP-080, single point gap frame press,5.91"stroke,air clutch & brake,10 HP V/S,2000,#13835T

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

90 Ton, Niagara #E90S, 9"stroke,18"SH,39"x25"bed,46 SPM,2"bolster,floor standing

Spec Sheet

RFQ

Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp

95 Ton, Magnum #M2PF95, gap frame press, 12" stroke, 10" bore, Allen Bradley PLC, 2015

Spec Sheet

RFQ

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

100 Ton, Aida #PC-10II, 6.6" stroke, 13.7" shut height, 3.9" adj., 41" x22" bed, air clutch & brake, #A6165

RFQ

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

100 Ton, Goiti #CFR, 5.5" stroke, 11.2" Shut Height, 3.5" adj, 38" x 24.5" bed, T-slotted, gap frame press

Spec Sheet

RFQ

Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

100 Ton, Goiti #CFR, single point gap frame press,5.5"stroke,A/C & brake,1984,#10406

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

100 Ton, Niagara #E-90-S, gap frame press, 4.5" stroke, 15.75" shut height, 4.5" adjustment, 25" x 39" bed, 46 SPM, 1989

RFQ

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

100 Ton, Niagara #E-90-S, gap frame press, 6" stroke, 15" SH, 4.5" slide adjustment, air clutch, 39" x 25" bed, 45 SPM, 1983

RFQ

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

100 Ton, Sutherland #Mark-100-G2, single point gap frame press,5.9"stroke,new,#10071

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

100 Ton, Sutherland #Mark-100-G2, 1 point gap frame press, 5.9" stroke, 13.4" die height, 3.1" adj., 35-80 SPM, #10886

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

100 Ton, Taksin #TCV100, 5.9"stroke,43.3"x27.5"tbl.,50 SPM,3.9"slide,15 HP,#82115

Spec Sheet

RFQ

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

100 Ton, Warco, 14"stroke, 24"SH, 39" x 33"bed, 35 SPM, 5 HP, A/C & brake, #50287

Spec Sheet

RFQ

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

110 Ton, Bliss #C110, 4"stroke, 42" x 27"bed, 19"SH, A/C, vari-speed 45-90 SPM, 1972, Tag #15738

RFQ

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

110 Ton, Bliss #C110, gap single crank, 6" stroke, 18" shut height, air clutch & brake, 50" x27" bed, #8493HP

Spec Sheet

RFQ

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

110 Ton, Minster #G1-110, gap frame stamping press,fixed base,8"stroke,5"adj,60 SPM

Spec Sheet

RFQ

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

110 Ton, Minster #G1-110, gap frame stamping press, 8"stroke, 20"SH, air clutch, auto lube, 60 SPM

RFQ

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

110 Ton, Minster #G1-110, 10" stroke, 17" shut height, 5" ram adjust, 42" x27" bed, 30 SPM, air clutch, #8664P

Spec Sheet

RFQ

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

110 Ton, Niagara #E-100, 6" stroke, 18-1/4" shut height, 42" x27" bed, 40 SPM, Link controls, under power, price cut, 1975 (2 available)

Spec Sheet

RFQ

Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

112 Ton, Komatsu /Maypress, 2.36"stroke,13.43"SH,25.20"x 15.91"bed,60 SPM,#16003

Spec Sheet

RFQ

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

112 Ton, Ravne #EDE100-1450-650, 5.9"stroke

Spec Sheet

RFQ

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

120 Ton, Heim #12GTX, gap frame punch press, 6" stroke, 16" shut height, air clutch, 45 SPM, #4832HP

Spec Sheet

RFQ

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

120 Ton, Niagara #110S, 5"str,17.75"SH,5"adj., 42"x27"bed, A/C & brake, #10727

RFQ

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

120 Ton, Niagara #E-110-S, Gap Frame Press, 5" stroke, 17.75" SH, 35-70 SPM, 42" left right X 27" front back bed, air clutch & brake, light curtains, air cushion, motorized adjustment

RFQ

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

121 Ton, Aida #C-1-11, gap press, 4.3"stroke, 11.2"SH, 30-70 SPM, air clutch & brake

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

121 Ton, Aida #C-11(2), 7"str,18.7"SH,3.5"adj,56.2" LR x 26.7" FB bed,A/C,50 SPM

Spec Sheet

RFQ

S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

121 Ton, Aida #C1-11(2), 56.2" x 26.7" bed, 7" stroke, 13.7" shut height, 50 SPM, air clutch & brake, 1988

RFQ

Rygate, LLC, Clarkston, MI 248-709-6723 (Email: brian@rygatellc.com) Brian Bridgeman

121 Ton, Aida #NC1-110(1), gap frame press, 4.33" stroke, 12.59" SH, air clutch, 50-100 SPM

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

121 Ton, Komatsu #H1F-110, Servo driven,7.9"stroke,19.7"SH,70-138 SPM,SIT IV,new

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

121 Ton, Komatsu #H1F110-2, gap frame servo press, 7.87" stroke, 19.7" SH, 3.9" adjustment, 70-138 SPM, new, S41770

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

121 Ton, Komatsu #OBS-110S-VS-3, single pt., gap frame press, 5.9" stroke, 3.9" adj., 32-65 SPM, 1998, #11232

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

121 Ton, Komatsu #OBS110S-VS-61, 5.9"str,19.7"SH,32-65 SPM,43.3"x26.7"bed,SIT IV,new

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

121 Ton, Seyi #FMP-110, single point gap frame press, 7.08" stroke, 13.7" shut height, 3.14" powered adjustment, 35-65 SPM variable, air clutch & brake, 1999, #14031J

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

121 Ton, Seyi #Mark-121, single point gap frame press, 7.08" stroke, 13.7" shut height, 3.14" powered adjustment, 35-65 SPM variable, air clutch & brake, 2004, #14030J

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

121 Ton, Stamtec #G1-110S, single point gap frame press, 1999, #11074

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

121 Ton, Sutherland Seyi #AutoStamper, gap frame press, 7.1" stroke, 35-65 SPM, 1995

Spec Sheet

RFQ

Machinery Central, Louisville, KY 502-648-3636 (Email: centralmachinery20@gmail.com) Denis Frankenberger

121 Ton, Sutherland #Mark-121, single point, 7.08" stroke, 13.7" shut height, 35-65 SPM variable, air clutch & brake, 2004

Spec Sheet

RFQ

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

121 Ton, Sutherland #Mark-121-1, single point gap frame press, 7" stroke, 35-70 SPM, air clutch & brake, #10887

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

121 Ton, Sutherland #Mark-121-2, 7.1"str,13.8"SH,30-60 SPM,45.3"x23.6"bed,I-Press,new

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

125 Ton, EBU Burkhardt #H125, 5.5"stroke,39" x 28"bed,85 SPM,14"throat,2010,#8266P

Spec Sheet

RFQ

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

125 Ton, Johnson #125BG-AC, 6"stroke,21-1/2"SH,A/C & brake,40 SPM,15 HP,#27633

Spec Sheet

RFQ

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

140 Ton, Sutherland #Mark-140-G2, 1 point gap frame press, 7.1" stroke, 13.8" die height, 3.1" adj., 30-60 SPM, #10881

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

140 Ton, Sutherland #Mark-140-G2, single point gap frame press,7.1"stroke,new,#10076

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

150 Ton, Aida #NC1-150, gap frame press, 7.8" stroke, 15.75" SH, air clutch & brake, 45 SPM, 15 HP, Triad light curtains, Traid brake monitor, Trabon lube system, #72948

Spec Sheet

RFQ

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

150 Ton, Aida #NC1-150(2), 7.87" stroke, 15.74" SH, 3.93" adj, 48" left right x 28.8" front back bed, 30-55 SPM

Spec Sheet

RFQ

S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

150 Ton, Aida #PC-15-II, gap frame press, 7.8" stroke, 3.3" adj., 45 SPM, 48" x25" bed, #11869

RFQ

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

150 Ton, Aida #PC-15020, gap frame press,7.8"str,3.3"adj.,45 SPM,A/C & brake,#11466

RFQ

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

150 Ton, Bliss #C-150, OBI press, 8"stroke, 26"SH, 50" x 30"bed, 40 SPM, Bliss air clutch / brake combination, 1999, #13904T

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

150 Ton, Komatsu #SG2-150, gap frame press, 60" x30" bed, 12" stroke, 32.5" SH, 40 SPM, 1980

RFQ

The Levy Recovery Group, Bloomfield, MI 248-914-4226 (Email: jlevy@levyrecovery.com) Jason Levy

150 Ton, Komatsu, open gap frame press

RFQ

Machinery Central, Louisville, KY 502-648-3636 (Email: centralmachinery20@gmail.com) Denis Frankenberger

150 Ton, Minster #G1-150-Geared, gap frame press, 10" stroke, 26.25" SH, air clutch, 30 SPM, 1994

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

150 Ton, Minster #OBS150, gap frame press, 10" stroke, 13.5"-17.5" SH, 4" adjustment, 30-55 SPM variable speed, 46" x 30" bed, 1998

RFQ

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

150 Ton, Niagara #E-150, OBS press, 6" stroke, 15-40" SH, 6" adj., 15-40 SPM, 50" x30" bed, 1980

Spec Sheet

RFQ

Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: jdgaston@msn.com) Jim Gaston

150 Ton, Niagara #E-150, 6"stroke, V/S 15-40 SPM, 20.5"SH, 6"adjustment, 1980

Spec Sheet

RFQ

Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp

150 Ton, Niagara #E-150, 6"str,22.5"SH,6"adj,50" LR x 30" FB bed,A/C,30-60 SPM

Spec Sheet

RFQ

S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

150 Ton, Niagara #E-150-S, gap frame press, 6" stroke, 20.5" SH, 30" x 50" bed, 40 SPM, 1987

RFQ

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

150 Ton, Niagara #E-150-S, 8"str,20.5"SH,6"adj,50" LR x 30" FB bed,A/C,25-50 SPM

Spec Sheet

RFQ

S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

150 Ton, Rousselle #G2-150, gap frame press, 4" stroke, 18" SH, 104" BH, 35 SPM, 100" x 24" slide area,, 34" bed to floor, 35 SPM

Spec Sheet

RFQ

Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Andrew / Jonathan

150 Ton, Rousselle #G2-150-96-30, 6"str,21"SH,6"adj,102"LRx30"FB,35 SPM,'79,#6903

Spec Sheet

RFQ

Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

150 Ton, Verson #150, 8"str,22"SH,6"adj,50" LR x 30" FB bed,A/C,35 SPM

Spec Sheet

RFQ

S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

150 Ton, Verson #150-OBG, gap frame press, 8" stroke, 22" SH, 6" adjustment, 35 SPM, 50" x 30" bed, air clutch & brake, air counterbalance, S/N 23369

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

150 Ton, Verson #150-OBG, geared gap frame press,8"stroke,22"SH,A/C,1969,#10060

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

160 Ton, Stamtec #G1-160, gap press, 7.87" stroke, 17.72" SH, 20-50 SPM, air clutch, 1999, $59,500.00

RFQ

HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: JPowell@hgrinc.com) Sales Rep.

160 Ton, Stanko, 18" x23" ram, 39-1/4" x29-1/4" bolster, 4.72" adjustment, 18.89" shut height, 6.29" stroke, 600 V.,large hyd. power pack included

RFQ

Affordable Machinery, Grand Rapids, MI 616-200-4308 (Email: Affordablemachinery@gmail.com) David Dimond

165 Ton, Aida #C1-15 (2), OBI punch press, 7.8"stroke, 3.3"slide adj., 15.7"SH, 48.8" x 24.8"bed, 45 SPM, air clutch, #13928T

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

165 Ton, Aida #NC1-150(2), gap frame press, 7.87" stroke, 15.7" SH, air clutch, 30-55 SPM, 1990

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

165 Ton, Aida #NC1-1500(2)E, servo pro, 7.87" stroke, 15.75" die height, 3.94" adj., 30-60 SPM, 2013

Spec Sheet

RFQ

Automatics & Machinery Co Inc, Longmont, CO 303-651-6545 (Email: sales@automatics.com) Steve Beck

165 Ton, Aida #PC-15(2), gap frame single point press, 7.8" stroke, 15.7" SDAU, 48.8" x 24.8" bed, 45 SPM, S41216

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

165 Ton, Aida #PC-15, 45 spm, 48"x 24"bed, air clutch & brake, 7.8"stroke, #712 (2)

Spec Sheet

RFQ

Highland Machinery & Crane, Benton Harbor, MI 269-926-9600 (Email: sales@highlandmachinery.com) C J Pawlowski

165 Ton, Aida gap frame press, #72773

RFQ

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

165 Ton, Aida, 6" stroke, 13" shut height, 46" x 49" bed, 33-65 SPM, 2008

Spec Sheet

RFQ

Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

165 Ton, Komatsu #OBS150, mechanical gap frame press, 7.87" stroke, 14.8" throat, hydraulic overload protection, 27-55 SPM, #S39044

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

165 Ton, Stamtec #G1-160-S, gap frame press, 8" stroke, 17.74" SH, air clutch & brake, 40 SPM

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

176 Ton, Sutherland #Mark-176-2, 7.9"str,17.7"SH,20-50 SPM,49.2"x31.5"bed,I-Press,new

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

176 Ton, Sutherland #Mark-2-176, gap frame press, 7.8" stroke, 17.7" SH, 30-50 SPM, 1989

Spec Sheet

RFQ

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

180 Ton, Verson #9-F, gap press, 8" stroke, 17" SH, 5" adjustment, 58" x 36" bed, 27 SPM

RFQ

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

180 Ton, Verson #9-F, gap frame press,mech,8"str,17"SH,5"adj,27 SPM,58" x 36"bed

Spec Sheet

RFQ

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

200 Ton, Aida #NC1-200, single point gap, 9.84"stroke, 4.33"adj, 1985, #7239

Spec Sheet

RFQ

Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

200 Ton, Blow #10, single crank gap frame press, 58" x 34" bed, 4" stroke, 19.75" shut height, 4" adj., 20-60 SPM, Wichita air clutch & brake, Bijur lubrication system

RFQ

Rygate, LLC, Clarkston, MI 248-709-6723 (Email: brian@rygatellc.com) Brian Bridgeman

200 Ton, Blow #10, 4"str,24.75"SH,4"adj,58" LR x 34" FB bed,A/C,0-80 SPM

Spec Sheet

RFQ

S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

200 Ton, Blow #10, single crank gap frame press, 58" x 34" bed, 6" stroke, 19.75" shut height, 4" adj., 20-60 SPM, Wichita air clutch & brake

RFQ

Rygate, LLC, Clarkston, MI 248-709-6723 (Email: brian@rygatellc.com) Brian Bridgeman

200 Ton, Blow #10, 6"str,24.5"SH,4"adj,58" LR x 34" FB bed,A/C,0-60 SPM

Spec Sheet

RFQ

S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

200 Ton, Blow #10, single crank gap frame press, 58" x 34" bed, 9" stroke, 16" shut height, 4" adj., 30-60 SPM, Wichita air clutch & brake, 1972

RFQ

Rygate, LLC, Clarkston, MI 248-709-6723 (Email: brian@rygatellc.com) Brian Bridgeman

200 Ton, Blow #10, 9"str,24.75"SH,4"adj,58" LR x 34" FB bed,A/C,0-60 SPM

Spec Sheet

RFQ

S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

200 Ton, Blow #10-OB, 12"str,20"SH on bolster,4.5"adj,58"x34"bed,A/C,40 SPM,air cush.

Spec Sheet

RFQ

S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

200 Ton, Clearing, 16"stroke,32"SH,6"adj.,18 SPM,52x30"ram,66x36"bed,KO in ram

RFQ

R D Erbe & Associates Inc, Lansing, MI 517-244-9919 (Email: machtrader@aol.com) Ronald Erbe

200 Ton, Stamtec #G1-200S, gap frame press, 7.38" stroke, 2000

RFQ

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

200 Ton, Sutherland #Mark-200-G2, 1 point gap frame press, 7.9" stroke, 17.7" die height, 3.9" adj., 20-50 SPM, #10889

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

200 Ton, Sutherland #Mark-200-G2, 1 point gap frame press, 7.9" stroke, 17.7" die height, 3.9" adj., 20-50 SPM, #10888

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

220 Ton, Aida #NC1-20-(2), single point,9.8"stroke,4.3"adj,25-45 SPM,1985,#7241

Spec Sheet

RFQ

Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

220 Ton, Aida #NC1-200(1), gap frame press, 6.29" stroke, 16.14" SH, air clutch, 35-70 SPM

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

220 Ton, Aida #NC1-200, 9.8"stroke, 4.3"adj, 25-45 SPM variable, 1984, #7245

Spec Sheet

RFQ

Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

220 Ton, Aida #NC1-200(2), sgl point gap press,9.8"stroke,A/C & brake,1985,#10399 (3)

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

220 Ton, Aida #NC1-200(2), single point gap press,9.8"stroke,A/C & brake,1984,#10401

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

220 Ton, Aida #NC1-200(2), 9.8" stroke, 19.8" shut height, 4.3" adj, 54" x37" bed, air clutch & brake, 1955

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

220 Ton, Aida #NC1-200(2), single point gap press,9.8"stroke,A/C & brake,1985,#10400

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

220 Ton, Aida #NC1-200(2), 9.84" stroke, 19.84" SH, 4.33" adj., 54" x37" bed, 25-45 SPM, 1994 (3 available)

Spec Sheet

RFQ

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

220 Ton, Aida #NC1-200(2), gap frame press, 9.84" stroke, 19.84" SH, air clutch, 25-45 SPM

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

220 Ton, Aida #NC1-200(2), gap frame press, 9.84" stroke, 17.71" SH, air clutch, 25-45 SPM

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

220 Ton, Aida #NC1-200(2), sgl point gap frame press,9.84"stroke,19.84"SH,4.33"adj.,54"x37"bed,25-45 SPM,A/C & brake,#13942J

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

220 Ton, Aida #NC1-200(2), single point, 9.84" stroke, 19.84" SH, 4.33" adj., air clutch & brake

Spec Sheet

RFQ

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

220 Ton, Aida #NC1-200(2), single crank gap frame press, 9.84" stroke, 19.84" SH, 4.33" adj., 25-45 SPM, air clutch & brake

Spec Sheet

RFQ

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

220 Ton, Aida #NC1-200.0(2)E, gap frame press, 9.8" stroke, 17.71" SH, air clutch, 20-50 SPM

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

220 Ton, Aida #PC-20(2), 9.8" stroke, 17.7" shut height, 57" x31" bed, air clutch, 33 SPM, 20 HP, #8372P

Spec Sheet

RFQ

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

220 Ton, Komatsu #H1F-200, Servo press,11.8"str,24.7"SH,57"x33"bed,124 SPM,SIT IV,new

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

220 Ton, Komatsu #OBS-200-2, gap frame, 5.5" stroke, 18.9" shut height, air clutch, 50-100 SPM, 1986, #8603HP

Spec Sheet

RFQ

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

220 Ton, Komatsu #OBS200S, gap frame press, 9.8" stroke, 18.9" shut height, 4.7" adjustment, 35" x 57" bed, 25-50 SPM, 1989

RFQ

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

220 Ton, Komatsu #OBS200S-US-61, gap frame press, 9.8" stroke, 17.7" SH, air clutch, 2014

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

220 Ton, Komatsu #OBS200S-VS-61, 9.8"str,25.2"SH,25-50 SPM,57"x33"bolster,SIT IV,new

RFQ

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

220 Ton, Komatsu #OBS200S-VS-61, 9.8" stroke, 17.7" shut height, 4.7" adj., 25-50 SPM, 2014, #10660

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

220 Ton, Stamtec #G1-200, 7.87"stroke, single point gap frame press, 1995, #10264

Spec Sheet

RFQ

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

220 Ton, Stamtec #G1-200, single point, 7.87"stroke, 17.71"SH, 20-50 SPM, 1995

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

220 Ton, Stamtec #G1-200, single point gap frame press,7.87"stroke,17.71"SH,20-50 SPM,55"x32"bed area,#13720J

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

220 Ton, Stamtec #G1-200, 7.88" stroke, 17.73" shut height, 20-50 SPM variable, air clutch & brake, 2000

Spec Sheet

RFQ

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

220 Ton, Stamtec #OCP-200, gap frame press,5.95"stroke,hydraulic overload,35-70 SPM,2003,#13844T

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

250 Ton, Cincinnati #250-OBS, gap frame press, 12" stroke, 21.5" throat, Cincinnati CNC Microprocessor controller, 1990, #16468

Spec Sheet

RFQ

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

250 Ton, Cincinnati #250OBS-QDC, hyd.75"-12" str, 60" x36" bed, 40 HP, updated control 2014, #29076

Spec Sheet

RFQ

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

250 Ton, Verson #12F, 10"stroke, 62" x 36"bed area, 32"SH, 5"slide adj., 40 SPM

RFQ

Affordable Machinery, Grand Rapids, MI 616-200-4308 (Email: Affordablemachinery@gmail.com) David Dimond

250 Ton, Verson #12F-O.B.G.PR, 10" stroke, 26" shut height, 5" adj., 36" x62" bed, 30 SPM, air clutch, 1967

Spec Sheet

RFQ

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

250 Ton, Verson #12F-OBG PR, single point gap frame press, 10" stroke, 30 SPM, rebuilt, 1976 (2 available)

Spec Sheet

RFQ

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

250 Ton, Verson #12F-OBI, inclined gap press, 12" stroke, 26" SH, 5" adjustment, 62" x 36" bolster, 26 SPM, Triad 3200 control

RFQ

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

250 Ton, Verson #250-OBG, gap frame press, 10" stroke, 26" SH, 6" adjustment, 30 SPM, air clutch & brake, air cushion, 1976

Spec Sheet

RFQ

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

250 Ton, Verson #250-OBGM gap frame press, 10"stroke, 26"SH, 6"adjustment, air clutch & brake, 1976, #13807J

Spec Sheet

RFQ

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

275 Ton, Niagara #E-250, gap frame mechanical press, 8" stroke, air clutch & brake, rebuilt 2019

Spec Sheet

RFQ

Master Machinery LLC, Detroit, MI 313-963-6576 (Email: ryan@mastermachineryllc.com) Ryan Messacar

275 Ton, Niagara #E-250-S, gap frame press, 8" stroke, 22" SH, 6" slide adjustment, 58" x 34" bed, 30-60 SPM, air clutch & brake, Wintress Dipro 1500 controls, light curtains, cedntral lube

RFQ

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

275 Ton, Niagara #E-250-S, 8"str,22"SH,6"adj., 58"x34"bed, A/C & brake, #11440

RFQ

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

286 Ton, Stamtec #G1-260, gap frame,9.84"str,59x33"bed,20-40 SPM,A/C,'00,#10614

RFQ

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Bliss #C150, gap frame press, 10" stroke, 20" SH, air clutch & brake, Cieco controls, 20-40 SPM

Spec Sheet

RFQ

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

Back to Machinery & Machine Tool listings.

= photo available Spec Sheet icon

Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller Video

Video

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search

Surplus Record

Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise