Browse:  Machinery Electrical Find Suppliers...      By Geographical Location    By Name or Partial Name    By Equipment Specialty

PLASTIC & RUBBER MACHINERY & EQUIPMENT:
MISCELLANEOUS PLASTIC & RUBBER EQUIPMENT

3-Roll Sheet Stack, Davis Standard, 31.5" W rolls w/14" diameter top roll, chromed bottom roll w/gearbox less DC motor, #48681      

3-Roll sheet stack, OMV, 47", #29671      

3-Roll Sheet Stack, OMV, 31.5" W rolls w/14" diameter top roll, rotary unions, chromed bottom roll w/gearbox, 6.5KW DC motor, #48682 (2 available)      

3-Roll Sheet Stack, Randcastle, 3-roll, 8" W face, 2" diameter, adj.bottom, fixed upper & middle rolls, 1/3 HP DC w/SCR controller, #47327      

Air forming tubing corrugator, ITIB #50/75/125, 480 V., #35562      

Air Wipe: Davis Standard, Stainless Steel, extrusion air wiper, 36" L x 1-1/2" W, vacuum, 3-1/2 HP     

Barrel heaters, Davis Standard, 5", cast aluminum, water cooled, 1 set of 5500 W, 230 V. & 3250 W, 230 V. heaters, #36401      

Barrel heaters, Davis Standard, 9.5", cast aluminum, water cooled, 12 KW @ 230 V., #36402      

Blown Film Die, Sterling, 5-1/2" 2-layer blown film die, #17439      

Blown Film Tower, Davis Standard #BFT, 15" wide, steel & rubber nip rolls, #13482A     

Bottle Uprighter   

Core winder, 6", 1 HP Dayton motor, 1725 RPM w/Focus 1 speed drive, #8866     

Cryogenic Parts Deflasher, Polyblast #20-4, cabinet style, portable, w/blast basket, '06     

Cryogenic Tumbler, Rampart #4-LTB, 27" W hex drum, attached control panel     

Extruder Screw, Sterling, 2.5", 30:1 L/D, #29513      

Extruder Screw, 4.5", 20:1 L/D, unused, #19177      

Extruder Screw, 4.5", 2-Stage, 38:1 L/D, #38449      

Extrusion Water Baths, RDN #W2-OD-1T-30, 31.5' Long, mounted on drip tank, 1993     

Extrusion Water Baths, Stainless Steel, 2- 20' Long x 9" x 9" Tanks, good condition (2 available)     

Fountain Coater, Hartig, 54", tape line downstream, #19767      

High frequency preheater, Fuji #FDP-223MX, 2 KW, portable on wheels, flip top design with rotational fixture, used, #27585      

Lab blown film winder, Brabender #BFW-100, 2.5" nip roll & chrome rolls, 1/50 HP, #7877     

Mini Secondary Nip, Gloucester, 11", #47631      

Mini Secondary Nip, Gloucester, 11", 480 V., 3-Phase, #47637 (16 available)      

Mini Secondary Nip, Gloucester, 16", 480 V., 3-Phase, #47633      

MTM High Speed Trimmer   

Payoff Stand, 7-rollers mounted to frame, magnetic resistance bearings, 2-columns/36" apart, #44176      

Plasticorder-Rheometer-Extruder, Brabender #1PL-V302, 3/4" x 16", Stainless Steel, with hot oil system, controls, portable, #1271784    

Plasticorder-Rheometer-Mixer, Brabender, 50 cu.in., Sigma blade Stainless Steel, with hot oil system, controls, portable, #1271785    

Plastics Shear, Pennran, 48", 9" stroke, 32 gal. hydraulic tank w/pump, 5 HP, 230/480 V., #6778      

Polycool, previously used on a 4.5" blown film line, can be fitted with a 20 HP blower at additional charge, #11413-2      

Polycool, previously used on a 4.5" blown film line, #28232      

Post Gusseter, 204" L rolls, 4-slit seals, with collapsers, 5 HP, 230/460 V., 3-phase motor, #47617      

Preformer, Barwell #C3, rubber, 10" diameter Ram, 2500 psi, 440 V., good, 1973     

Purge Recovery System, Maguire #PRS-20, 20" x 30" x 16" containment chamber, 5 HP, #8909     

Rubber Grinder, Remco #Rollmaster, 32" x 160", 12" x 2" wheel, 10 HP headstock     

Rubber Pull Roll Stand, IDS, 8" diameter x 62" wide rubber rolls, pneumatic roll adjustment, servo driven w/motor, #36611      

Semiautomatic Molding Machine, Peltesman #MIGL-33, 12" x 8" x 16" capacity, low pressure, s/n #0101      

Sheet Die, Cloeren Flexlip, 55", center back infeed, serial #W96-1067-01, #5523    

Sheet Stack, Cincinnati Milacron, 2-roll, 18" diameter x 34" roll face, vert.stack, silent chain, 5HP, 1750DC motor, 18.131:1 ratio, #46357      

Side Treater, Corona, design simple side treater, 124", less treater control, #32763      

Single roll cast film station, Killion, 8" (?)x8" (?)chrome plated cored roll, 8" (?)ruber pull roll, 1/2 HP, single winder, #39429      

Turn Table, Garvey #1546   

Vacuum loading system, Roots Universal RAI blower, size 59 U-RAI, 25 HP, 857 cfm, silencer, mounted on a frame, #39423      

Vacuum sizer, PMC, 20' OA length, Stainless Steel, 5" diameter opening, 6 chamber, internal spray bars, adj.height, #19763      

Vertical sheet stack, Crown, 65" wide, 3-roll, 16" diameter rolls, chain driven, 10 HP, #15315A     

Water Bath, Killion, 12" water bath, Stainless Steel, #178-16      

Web Guide, Avionic, 64" wide, tape line downstream, #21100      

Winder for tube/cable/cord, 1HP, variable speed control, 120V., last used 2.5" flexible vinyl tubing     

Back to category listings.

 = photo available     = spec sheet available     = PDF available     = request quote from seller     = video available     = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search

Surplus Record All Rights Reserved. https://surplusrecord.com Tel: 312-372-9077 Customer Service Mobile Apps Advertise