Browse:  Machinery Electrical Find Suppliers...      By Geographical Location    By Name or Partial Name    By Equipment Specialty

PLASTIC & RUBBER MACHINERY & EQUIPMENT:
MOLDING MACHINES, INJECTION, SCREW TYPE, PLASTIC

10 Ton, 0.455 oz., Multitech Micro Molder #HMM-10NPE, 3-heaters,warranty,2018,#10497

      

25 Ton, Demag #Ergotech Viva 250-80, 16.15"x16.15"platens,12.14"clamp str,6.3"ht,2001

      

28 Ton, 0.9 oz., Arburg Allrounder #221-55-250, horizontal,20mm screw,1990,#11129

     

28 Ton, 1.2 oz., Arburg #221M250, 8.7"TBS,7.87"open str,13.46"x9.84"platen,'96,#10658

     

28 Ton, 2.05 oz., Tayu #TC-200, tiebarless vertical clamp/horizontal shot, 2018, #10509

     

38 Ton, 1.5 oz., Arburg Allrounder #221-75-350, horizontal,25mm screw,1990,#11130 (2)

     

38 Ton, 1.5 oz., Arburg #221-75-350, horizontal molding machine,25mm screw,'93,#11132

     

38 Ton, 1.5 oz., Arburg #221M-350-75, horizontal molding machine, 25mm screw, 1998, #11133

     

38 Ton, 1.8 oz., Demag #350/320-80 Ergotech system injection molding machine, 11" x 11" tie bar spacing, 16.1" x 16.1" platen, 13.8" clamp stroke, 20.9" daylight, NC-4 control, air blow, 2001

     

38 Ton, 1.8 oz., Demag #350/320-80 Ergotech system injection molding machine, NC-4 Control, 2001

     

40 Ton, .73 oz., Cincinnati Milacron #Vector-CH40R-.73,8"x10"platen,Camac VST Ctrl,'00

     

40 Ton, 1.38 oz., Battenfeld #BA350V/50H-R, 4-station rotary, 25mm screw,'02,#9930

      

40 Ton, 1.6 oz., Engel #ES80/40TL-1.6, tiebarless injection mold,EC88 ctrl,2001

      

40 Ton, Arburg Allrounder #221M350-75, injection molding machine, 1997

      

45 Ton, Battenfeld #45/200/02/08/6/20, injection molder, #178-1

      

49.8 Ton, Arburg Allrounder #375-V500-290 injection molder, 9.8" open stroke, 6.7"-10.6" mold height, Arburg V1 control, 35.4" table, rotary table, 2016, S40894

     

50 Ton, 2.2 oz., Engel #IN200V/40xsRO, vertical,25mm screw,CC200 ctrl,2014,#11204

     

50 Ton, 5.5 oz., Trueblood #B50-4, vert.w/4-station rotary,9"x 6"platen,#624

   

55 Ton, .79 oz., Arburg #320S-500-60, LSR injection mold machine,Selogica ctrl,2000

      

55 Ton, 1.3 oz., Sumitomo #SE50DU, electric, 22mm screw, 23.62" DL, 2007, #11298

     

55 Ton, 1.3 oz., Sumitomo #SE50DU, electric, 22mm screw, 23.62" DL, 2007, #11297

     

55 Ton, 2.2 oz., Engel #ES200/55, 12.9"clamp stroke,18.9"Daylight,1992,#9475

      

55 Ton, 2.3 oz., Engel #ES200/55, 3.9"stroke, hydraulic injection molder, 1992, #27410

      

55 Ton, 2.9 oz., Van Dorn #ET500-120, compact injection molding machine, 14" x 14" tie bar spacing, 20.5" x 20.5" platen, NC-4 control, air blow, valve gate, 1997

     

55 Ton, 3.17 oz., Arburg #320M-500-210 Allrounder, 14.77" clamp stroke, 24.62" DL, 1992, #11323

     

55 Ton, 4 oz., Arburg #320-210-500 Allrounder, 14.77"clamp str.,24.62"DL,'94,#9497

      

55 Ton, 4.44 oz., Cincinnati #VS55-4.44, Camac VSX ctrl,19.7"x19.1"platen,15 HP,1997

      

60 Ton, 3.2 oz., Engel #ES200/60T, tiebarless injection mold machine,CC90 ctrl,1997

      

63 Ton, 3.5 oz., Multitech #C55SD-GK, vertical shuttle injection molder,2018,#10511

      

75 Ton, Sumitomo #SH75-NIV-A, 3.8 oz.,NIV control, 25 HP, 9.8 KW heater, 460 V.,1994

      

80 Ton, 3 oz., Newbury #V380RS, rotary molding,12"x14"platen,Maco 4000 ctrl,1993

      

80 Ton, 4 oz., Van Dorn Demag #80VTCR4, 12x14" platen, 20.38" DL, Pathfinder 3000, 2000

     

80 Ton, 4.65 oz., Boy #80M, injection molding, 26.77"DL, 230 V., 1999, #8106

      

80 Ton, Engel #Elast280/90VTL, 48mm injection str, 10 L/D pull roll,'06, #15202A

     

80 Ton, Engel #Elast280/90VTL, vertical rubber, 48mm injection str, 2006, #15203

     

80 Ton, Engel #Elast280/90VTL, vertical rubber injection molding, 2006, #15773A

    

80 Ton, Van Dorn Demag #Ergotech Systems plastic injection molding machine, 1998

     

83 Ton, 3.8 oz., Sumitomo #SR75DU, electric, 32mm screw, 27.95" DL, 230V., 2007, #11296

     

85 Ton, 5 oz., Van Dorn #85HT-5, 22.8" x 20.4" platen,28" DL,Pathfinder 3000 Ctrl,toggle clamp,1998

      

85 Ton, 5 oz., Van Dorn Demag #85HT5, horiz.,1.38"screw,Pathfinder 1000,1996,#11101

     

85 Ton, 5.95 oz., Multitech #V85R2GK-LSR, 2 station LSR, 40mm screw, KEBA Control, 2014, #9889

      

85 Ton, Van Dorn injection molder, Pathfinder 1000 ctrl,22.8"-20.04"platen,mint cond.

   

89 Ton, 4 oz., Nissei #FN1000, 21.5" x 21.5"platen, 15.2"between tie bars, S38842

      

90 Ton, 4.06 oz., Nissei #FN1000, N9G ctrl, 15.1" x 15.1"TBS, 26.4"DL, 1996

      

90 Ton, 8.49 oz., Engel #IN500V/90US, sgl-station vt./vt.injection molder,'09,#10395

      

100 Ton, 7.6 oz., Engel #es330/100TL, horizontal molding machine,tiebarless,'01,#11131

     

100 Ton, Demag #D100-182NCIII, injection molding machine with control cabinet & transformer

   

100 Ton, Hull, Molding, 20" x 20", hydraulic ejector, #9629

   

105 Ton, 3.4 oz., Nissei #TNS100RE-12VE, vert. rotary injection molder, 2008, #16435A

     

110 Ton, 3.3 oz., Nissei #TD110E-9E, vert,25.4"x16.1"platen,17.72" DL,C9300T Ctrl,'03

     

110 Ton, 3.4 oz., Nissei #TH110RE-12VE, 1.96" str, 22.83" DL, vertical, 2005,#16385A

     

110 Ton, 4.1 oz., Arburg #420V100-350,Actionica ctrl,21.45"x21.45"platen,29.52" DL,'98

      

110 Ton, 6 oz., Cincinnati Milacron Fanuc Roboshot #S-2000I-110B, electric injection molder, Fanuc 30-iA control, 2010, S40969

    

110 Ton, 6 oz., Cincinnati Milacron Fanuc Roboshot #S-2000i-110B, electric injection molders, Mattec sprue picker, Fanuc 30i-A, 2010 & 2012, S40733 (2 available)

     

110 Ton, 6 oz., Toyo #TM110H, 18.11"x18.11" spacing, injection molding,'97,#15655J

     

110 Ton, 6 oz., Toyo #TM110H, 18.11"x18.11" spacing, injection molding,'01,#15654J

     

110 Ton, 6.7 oz., Sumitomo #SH100C, injection molding machine, used, 2003

     

110 Ton, 8.58 oz., Toshiba #EC110NII-4B, electric injection molding, 2006, #16850A

     

110 Ton, Battenfeld #R1100/200, vertical injection molding,Unilog B4 Ctrl,2003

     

120 Ton, 3.3/1.3 oz., Demag #1100-310H/80V, 2-shot molder,30/22mm screw,'99,#10616

      

120 Ton, 5.3 oz., Toshiba #ISF120SII-3A, 24"x24"platen,hyd. clamp,27.5"daylight,1992

      

120 Ton, 6 oz., Van Dorn Demag #120HT6, horizontal, 38mm screw, Pathfinder 3000, 1998, #11078

     

120 Ton, 8 oz., Van Dorn #120-RS-8F-VV-HT, 1.58"dia screw,25"x25"platen,7.62"str,1989

     

120 Ton, 8 oz., Van Dorn Demag #120HT8,horiz,40mm screw,Pathfinder 3000,'01,#10881

     

120 Ton, 18 oz., Nissei AsB #FS120, injection molding machine, horizontal

     

120 Ton, Van Dorn #120-RS-8F-HT, injection molding machine, 1990

     

121 Ton, 1.7 oz., Krauss Maffei #110-390 C2, 25mm screw, 35.43"DL, 2004, #9337

      

123 Ton, 4.3 oz., Ferromatik Milacron #K110D-S, horizontal,35mm screw,1998,#10663

     

123 Ton, 4.3 oz., Ferromatik Milacron #K110D-S, horizontal,35mm screw,1998,#10664 (2)

     

125 Ton, 3.5 oz., Van Dorn Demag #ERGOtech-Cadence-125/18.51-310, horizontal, 2001, #11317

     

125 Ton, 10.6 oz., Milacron Magna Toggle Servo #MTA125, horiz.,13.8"stroke,2016,#11193

     

135 Ton, 5.54 oz., Haitian #MA1200, horizontal,36mm screw,KEBA ctrl,2010,#11125

     

135 Ton, 5.54 oz., Haitian #MA1200, horizontal, 36mm screw, Keba 4030 Control, 2010, #10883

     

135 Ton, 5.54 oz., Haitian, horizontal, 36mm screw, Keba 4030 Control, 31.89" DL, 2010, #11037

     

135 Ton, 6.8 oz., Haitian #MA1200II, 14.17"str, 24.21" x 24.21" planten, horiz., 2013

     

135 Ton, 7.2 oz., Demag #Extra-135-430, 33.5"DL, 26.4" x 26.4" planten, 2005, #16228J

     

135 Ton, 8.7 oz., Haitian #MA-II-1200/410, horiz,45mm screw,KEBA ctrl,2015,#11070

     

135 Ton, 8.7 oz., Haitian #MA-II-1200/410C, horizontal, 45mm screw, KEBA 2880, 2017, #11148

     

135 Ton, Jomar #135E, 3"Egan extruder, 25:1 L/D, 10"SH, s/n #4000-034, 1994, #8145

     

150 Ton, 4 oz., Demag #150VTTS4-0070, 4-post shuttle molding machine, 2004, #9321

      

150 Ton, 5.7 oz., Trueblood #PH150B-5.7, 53"rotary tbl,2 sta,14"x21"platen,27" DL

     

150 Ton, 9 oz., Demag #Ergotech150-610, 11.89"-32.28" DL, IBED NC 4, 2001, #13575A

     

150 Ton, 9.1 oz., Newbury #150VTS9, 30"x31"platen,35" DL,Pathfinder 3000 Ctrl,2000

     

150 Ton, 12.7 oz., Engel #ES650/150TLV-US, tiebarless molder,50mm screw,2002,#10500

      

165 Ton, 4 oz., Cincinnati Milacron Roboshot #Robo-1651-114G, 16.5"str,Fanuc 16-1,'00

     

165 Ton, 10.3 oz., Asian Plastic #SM-150TSV, hi-speed,horizontal,46mm screw,'12,#10027

     

170 Ton, 8 oz., Van Dorn #170-RS-8FHT, 29" x 29" platen,35" DL,Pathfinder SEL Ctrlr,1992

      

174 Ton, 7.26 oz., Ferromatik Milacron Electron #155, horiz.,40mm screw,2003,#10666

     

175 Ton, 17 oz., Ameriplas #EPCO-9758, vert injection molding,Maco 4000 Ctrlr,25" x 22" platen,50 HP,25000 PSI,2005

      

180 Ton, 12.6 oz., Haitain #MA-1600/600, horizontal, 40mm screw, Keba 1075, 2013, #11327

     

185 Ton, 19 oz., Toshiba #IGS190NV10-10, horizontal,4.7"ejector stroke,2000,#11134

     

200 Ton, 8.2 oz., Engel #ES650H/330V/200TL, 35.43" x29.53" platen, 40HP, CC100 Control, 2002

     

200 Ton, 10.3 oz., Engel #ES600/200, Vertical Injection Molding,EC88 Ctrl,1993

      

202 Ton, 4.7 oz., Engel #E-Motion-200, 30" x 30" platen, 20.5" x 20.5" TBS, 2010, S39647

      

218 Ton, 21 oz., Chen Hsong #JM-218MKIII, injection molding machine, 2001

     

220 Ton, 12.88 oz., Borche #BS200, hybrid electric injection molding machine, 2016 (2 available)

      

220 Ton, Arburg #520C 2000-350/150, 2-shot,28.68"x28.68"platen,Allrounder Centex,2001

     

224 Ton, 11.28 oz., Demag #2000-840, horizontal,NC4 Ergo ctrl,10.8"stroke,2001,#11126

     

225 Ton, 26 oz., Milacron Magna Toggle #MT225-26, horizontal,20.1"stroke,2005,#11194

     

225 Ton, 26 oz., Milacron Magna Toggle #MTG2006, horizontal,20.1"stroke,2006,#11195

     

225 Ton, 26 oz., Milacron Magna Toggle Servo #MTS225, horizontal, 20.1" stroke, 2012, #11196

     

230 Ton, 20 oz., Van Dorn Demag #230HT20, horizontal, Pathfinder 2500 Control, 1997, #11200

     

240 Ton, 10.3 oz., Toshiba #EC-240NII-V30-i8Y, electric injection molding, 2009, #15962A

     

242 Ton, 16 oz., Nissei #ES5000-50E Electric injection molding machine, NC9300T Control, SPI robot interface, 23.2" x 23.2" tie bar spacing, 33.5" x 33.5" platen, 42.5"daylight, 20.9" clamp stroke, 4.7" ejector stroke, 2003

     

245 Ton, 17.8 oz., JSW #J245EII-B, 33.1" x 33.1" platen,41.34" DL,Syscom 1000 Ctrl,toggle clamp,1994

    

250 Ton, 15.9 oz., Engel #ES700/250, 7.87"/41.73"DL, core pull, CC90 control, 1990

      

250 Ton, 38 oz., Krauss Maffei Thermoset #250-1650-B2, 75mm screw,45"DL,#2445C

   

259 Ton, 11 oz., Haitian #VE2300/750H, injection molding press, Sigmatek CNC, 2009

     

275 Ton, 18 oz., Arburg #630S2500-1300, injection molding machine, Selogica controls, air blow, core pull, robot interface, 24.8" x 24.8" tie bar spacing, 35.4" x 35.4" platen, 23.62" opening stroke, 2003

     

300 Ton, 20 oz., Toyo #TM300H, injection molding machine, PLCS-9, 1998

    

300 Ton, 29 oz., Cincinnati Milacron #VT300-29, 36.8" x 36.2" platen,48" DL,Camac VEL Ctrl,1991

      

300 Ton, 29 oz., Cincinnati #VT300-29, 36.8"x36.2"platen,Camcac VSX,1996,#69725

      

300 Ton, 30 oz., Van Dorn #300-RS-30FHT, Pathfinder Ctrl,37" x 37" platen,49" DL,1991

      

300 Ton, 40.3 oz., Newbury #300VTTS1920, 39x39"platen,Van Dorn Pathfinder 3000,'01

     

309 Ton, 23 oz., Haitian #HTW280, horiz,36.22"x36.22"platen,Siemens ctrl,'07,#10662

     

309 Ton, 30 oz., Toshiba #ISF310SII-19A, 35.4" x 35.4" platen,31.7" DL,hyd clamp,1992

      

310 Ton, 22.9 oz./31.2 oz., Ferromatik-Milacron #K275-S/2F, 2-injector screws, 1999

      

310 Ton, 26 oz.., Milacron Magan Toggle Servo #MTS310, horiz,37x37"platen,2010,#11197

     

310 Ton, 28.3 oz., Nissei #ES6000-71E Electric injection molding, NC9300T Control, 26" x 26" tie bar spacing, 37.6" x 37.6" platen, 23.6" clamp stroke, 5.1" ejector stroke, 47.2"daylight, 2000

     

310 Ton, 30 oz., Toshiba #ISFA310-19A, 35.4" x 35.4" Platen,41.7" DL,Hydraulic Clamp,1994

      

330 Ton, 33 oz., Krauss Maffei #300-1900 C2, 70mm screw,32.2"str.,45.2"DL,'99,#8504

      

331 Ton, 33.6 oz./6.9 oz., Krauss Maffei #300-1900C2, 2-shot L w/rotary tbl,'04,#10898

     

340 Ton, 24.8 oz., Engel #Victory-1800/340-Hypex, tiebarless, 43.3" x43.3" platen, 2017

     

350 Ton, 14 oz., Trueblood #PH350B-14, vert.rot,72"rot.tbl,3 sta,32x28"platen,30.25"DL

     

350 Ton, 30 oz., Battenfeld #TS injection mold machine, 27.95"x27.95"TBS,Unilog B4,'01

    

350 Ton, 31.8 oz., Engel #ES-1350/350-HLST, 51.18" x 29.13" platen, 37.4"str,'98,#2112

      

350 Ton, 31.8 oz., Engel #ES1350/350 HLST,51.18x29.13"platen,hyd clamp,CC100 Ctrl,'98

     

360 Ton, 34.7/34.7 oz., Arburg #720S3200-2100/2100, 2-shot L molder.2003,#10900

     

390 Ton, 27.5 oz., Toshiba #EC390SXIIV50, Injectvisor V50 Control, SPI robot interface,31.9" x 28.7"tie bar spacing, 43.7" x 40.6"platen, 11.8/55.9"daylight, air blow, 2018

     

400 Ton, 20 oz., Van Dorn Demag #400HP20,41.5"x41.5"platen,Pathfinder 5000 Ctrl,1998

   

400 Ton, 25.4 oz., Van Dorn Demag #400HP1220,41.5x41.5"platen,Pathfinder 5000 Ctrl,'99

     

400 Ton, 27.5 oz., Engel #ES2050/400A, horizontal, 61.5" daylight, 27.55" clamp stroke, 1999, #11201

     

400 Ton, 27.7 oz., Netstal Synergy #S-4200/1700, 2.44mm screw,Sycap cntrllr,'99,#8432

      

400 Ton, 40 oz., Van Dorn #400HT, P3000, injection molding machine, 2000

     

400 Ton, 40.8 oz., Toyo #TM-400G2, injection molding,40.16" x 40.16"platen,PLCS-6 Ctrlr,toggle clamp,1996

      

400 Ton, 41 oz., Milacron #VH400, horizontal,40"x30"platen,CMAC 486 ctrl,'96,#11115

     

400 Ton, 43.4 oz., Husky #G400 RS85/70, 56.1"DL, 46.1" x 46.1"platen, 1997, #15036A

     

440 Ton, 41 oz., Cincinnati, 28.9"x28.9"TBS,CP,Camac 486,w/3-Axis Servo robot

    

440 Ton, 67.62 oz., Engle #EBLAST-2000.440H-US, CNC rubber inj.molder,24"open stroke

      

440 Ton, 157.3 oz., Husky #GL400GEN RS120/110, injection molding, 2001, #8430

      

440 Ton, 157.3 oz., Husky #GL400GEN-RS120/110, 4.33mm screw,Zycom ctrl,'01,#8431

      

440 Ton, Engel #Elast-1500/400H, horizontal rubber injection molding machine, 23.5" stroke, 10" mold height, 48" x48" platen, 1.5" screw diameter, 2006, #B4018

      

450 Ton, 37.47 oz., Engel #ES2000/450-37, 3.78"x43.39"platen,57.56" DL,Engel Ctrl,1994

     

450 Ton, 85 oz., Cincinnati Milacron, 82.28" DL, injection molding, 2003, #15567J

    

495 Ton, 33.4 oz., Sumitomo #SE450HD-C1700, NVIII Control, air blow, 2 valve gates, 34.2" x 32.2" tie bar spacing, 50.37" x 47.24" platen, 62.9" open daylight, 21.6"/35.4" mold size, 2007

     

495 Ton, 38 oz., Sumitomo #SH450A, Sumitomo NIV control, 1997

     

500 Ton, 37.5 oz., Engel #ES2050/500, injection molding machine, CC-100 Control, 330.7" x 33.07" tie bar spacing, 47.82" x 47.24" platen, 11.83"-33.9" mold height, 27.56" clamp stroke, 61.5" daylight, 2002

     

500 Ton, 43.5 oz., Toshiba #EC500SXIIV50-26, Injectvisor V50 control, 34.3" x31.9" TBS, 13.8"/63"daylight,SPI robot interface Euromap 67,air blow, 2018

     

500 Ton, 50.4 oz., Engel #ES2550/500, 27.56"clamp str, 61.5"DL, Injection Molder,'02

     

500 Ton, 60 oz., Van Dorn Demag, horizontal,Pathfinder 3000 ctrl,core pull,'98,#11182

     

500 Ton, 73.8 oz., JSW #J500EII, horizontal injection molding, Syscom 1000 Control, 31.8" x 31.8" tie bar spacing, 46.3" x 46.3" platen, 61"daylight, 31.5" clamp stroke, 1997

     

550 Ton, 54 oz., Cincinnati Milacron #VT-550-54, 49x49 platten,3.54"screw,63"DL,'96

    

550 Ton, 76 oz., Milacron Magna Toggle #MTS500, horizontal,32.2"stroke,2015,#11198

     

600 Ton, 48 oz., Engel #DUO-610, 40.5" x35.7" TBS, 55.9" x53.8" platen, 2013

     

600 Ton, 80.5 oz., Engel #ES3500/600, 36"TBS,12"-31.5"die height,Cc90-A02,1992,S35995

      

610 Ton, 105 oz., Engel #CL4550/610US, horiz.,CC100 A03 ctrl,HKO,65"DL,2005,#11053

     

650 Ton, 60 oz., Van Dorn #650HT60F, injection mold, Pathfinder 2500 Control, 36" x 36" tie bar spacing, 53" x 53" platen, 69.5"daylight, 35.5" clamp stroke, 1996

     

660 Ton, 148 oz., Satoh, vertical type, 92" x84" platen, in plant, under power, excellent 1993, #sr5129

      

700 Ton, 110 oz., Cincinnati #H700-110, 36-1/2" x 36-1/2"TBS,XTC ctrl,rebuilt 1993

      

700 Ton, 165 oz., Milacron #H700-165W/P, horizontal, new control upgrade, 1989, #11252

     

700 Ton, 165 oz., Milacron #H700-165W/P, horizontal, core pull, air eject, 1986, #11250

     

700 Ton, 165 oz., Milacron #H700-165W/P, horizontal, core pull, air eject, 1989, #11251 (2 available)

     

700 Ton, 225 oz., Milacron #H700-225W/P, horizontal, new control upgrade, 1987, #11253

     

700 Ton, Van Dorn, Injection Molding Machine

    

720 Ton, 110 oz., Mitsubishi #720MJ-110, MAC IV Control, 37.4" x37.4" tie rod distance, 55.12"x55.12"platen,53.1"clamp stroke,70.8"daylight, 1998

     

725 Ton, 140 oz., Milacron Maxima #MM725-140, horizontal,69.9"stroke,2004,#11199

     

787 Ton, 118.48 oz., Haitian #MA7000/6800, horizontal, 100mm screw, KEBA Control, 2018, #11207

     

850 Ton, 140 oz., Cincinnati, 45.3" x37.4" TBS, MACO 4000, CP, RI, spare parts, 1994, avail.02/2020

    

940 Ton, 121 oz., JSW #J940E-C5, injection molding machine, C-5 control, 41.7" x 41.7" tie bar spacing, 61.4" x 61.4" platen, 90.6" daylight, 47.2" clamp stroke, 1995

     

1300 Ton, 362 oz., Milacron #MM1300-362, horizontal, Xtreem ST Control, 98.43" DL, 2001, #11246

     

1300 Ton, 362 oz., Milacron #MM1300-362, horizontal, Xtreem ST Control, 98.43" DL, 2002, #11248

     

1300 Ton, 362 oz., Milacron #MM1300-362, horizontal, Xtreem ST Control, 98.43" DL, 2001, #11247

     

1300 Ton, 362 oz., Milacron #MM1300-362, horizontal, Xtreem ST Control, 98.43" DL, 2002, #11249

     

1430 Ton, 277 oz., Toshiba #ISG1450DW50-150A, injection molding, Injectvisor V50 control, 55.1" x55.1" TBS, 78.3"x78.3"platen,9.8"ejector stroke,27.547"mold height,98.4"daylight,2015

     

1500 Ton, 260 oz., Van Dorn #1500HP-260WP, 96" x76" platen, Pathfinder 3000, 1995

     

1800 Ton, 246.63 oz., UBE #659, injection unit, 1212 Injection cap. per/hr., 21149 PSI, 52 kW Heater Power, 4.72"screw dia.

     

1880 Ton, 540 oz., Milacron #ML1880-540, horizontal, Xtreem ST Control, HKO, 2000, #11294 (2 available)

     

1880 Ton, 540 oz., Milacron #ML1880-540, horizontal, Xtreem ST Control, HKO, 2000, #11245

     

2246 Ton, 295.7 oz., Engel #Duo17060/2200, injection molding machine w/Fanuc robot, 5.3"screw diameter, 78.7" x 63"tie bar distance, 106.3" x 95.7"platen, 2018

    

4500 Ton, 740 oz., Mitsubishi #4500MM3-740, MAC 6, Melsec PLC,1998,2002,#103835 (2)

      

Cincinnati / Fanuc Autoshot T #100D, CNC Injection Molding Machine, 1991

     

Cincinnati Milacron injection unit #862, 362 oz.,removed from 3000 ton injection molder

      

Cincinnati Milacron #MTS310, injection molding machine, 60mm screw, 26.6 oz. shot, 37" x 37" platen, 28100 PSO, 26" x 26" tie bar spacing, 2015

      

Cincinnati #VSX-55-3.51, injection molding machine w/chiller, 230 supply V.

  

Engel #ES200/60HL, injection molding machine, 1998

     

Back to category listings.

 = photo available     = spec sheet available     = PDF available     = request quote from seller     = video available     = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search

Surplus Record All Rights Reserved. https://surplusrecord.com Tel: 312-372-9077 Customer Service Mobile Apps Advertise