Browse: Machinery Electrical

Machinery & Equipment >

Millers >

Millers, Vertical, Bed & Knee Type,

MILLERS, VERTICAL, Bed & Knee Type, (Also See Millers, CNC)

For over 35 years a Leader in the Machine Tool Ind.

There are 290 listings in this category
Update: Sat, Dec 7, 2019 00:35:13

Advanced Search

Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added

Original Sort

Accupath #AC-2V-949, 9" x 49" table., 3 HP, 35.5" X, 12.5" Y, 16" Z, X table power feed, Newall 2-Axis DRO, #A5929

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Acer #2VK, vertical mill w/Prototrak Plus control, 50" x 10" table, PDB, 3 HP, 1992, #63976

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Acer #3VK, 10" x 50" table, 34" long, 16" cross, 16" vert.knee, 5" quill, 20" ram, 3 HP, brand new

Nevins Machinery Concepts Inc, South Easton, MA 508-894-0008 (Email: sales@nevinsmachinery.com) Jim Nevins

Acer #3VK, 10" x 50" table, 32" X, 15" Y, 16" knee tvl., 3 HP, R-8 spindle, 5" quill, 4200 RPM

Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Email: scott@alternativemachinetool.com) Scott Buth

Acer #3VKH, vertical mill, 10" x 50" T-slotted table, power feed, R-8, 2-Axis DRO, 3 HP, 1995

Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales

Acer #Ultima, Ram Type, 10" x 50" table, 36" long., 15.75" cross, 5" quill, 3 HP, Newall Sapphire 2-Axis DRO, 1997

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn

Acer #Ultima-3VK, 3 HP, V/S, 10" x 50" PF table., 34" long, 16" cross, 16" knee, 20" ram, DRO, Kurt vise, PDB, 1996, #30617

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

Acer, vertical ram type knee mill, 3 HP, #70647

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Acer, vertical milling machine, 9" x 42" T-slotted table, 3 HP, 5" spindle travel, 8" head travel, 12" knee vertical travel, #18581

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

Acra #1054, 10" x 54" table, vari-speed, heavy duty, powered table feed, Bijur lubrication system, s/n #759939, used, #A3940

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Acra #AM-2V, 9" x 42" table, 3 HP, 30" long., 12.5" cross, 16" knee, 5" quill, V/S, #A5867

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Acra #AM-2V, 9" x 49" table, 30" X, 12.5" Y, 16" Z, 4200 RPM, riser, drawbar, 3 HP, #43576

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

Acra #AM-3V, 10" x 54" table, 3 HP, 39.5" X, 16.5" Y, 16" Z, variable speed, #40 taper, Newall DP7 2-Axis DRO, #A5872

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Acra #LCM-50, 9" x 50" table, 3 HP, 36" X, 12" Y, 16" Z, variable speed, knee mill, Newall NMS300 2-Axis DRO, #A5891

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Acra #LS-2VS, 9" x 49" table., 30" long, 12" cross, 16" knee, 5" quill, 13" ram, 2-Axis DRO, X table power feed, PDB, 1995, #A5777

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Acra #PK, 10" x 50" table., 3 HP, 5" str., 500-4200 RPM, V/S head, 2-Axis DRO, X-table power feed, collets, box ways, #A5770

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Alliant #1-1/2TCV, vertical mill w/DRO, 9" x 42" table, 30" X, 12.5" Y, 16" Z, 3 HP, #R8, #28408

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

Alliant #1-1/2TMV, ram type vertical mill, 9" x 42" table, 2 HP, AcuRite 3-Axis DRO, #65965

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Alliant #1158-5V, vertical milling machine, DRO, 11" x 58" table, 5 HP, serial #K5v-1156

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Alliant #42VC, vertical milling machine, ram type, 9" x 42" table, 2 HP, R-8 spindle, DRO, 1986

CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Alliant #42VC, vertical mill, S/N 74086319, #016476

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

Alliant #HMV, vertical mill, 9" x 42" table with 3 T-slots, R-8, AcuRite III 2-Axis DRO, 3 HP, one shot lube, #19108

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

Alliant, ram type vertical mill, 9" x 42" table, #10353

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Alliant, Proto Trak MX2, 10" x 44" table, 4250 RPM, 2 HP V-S

Automatics & Machinery Co Inc, Longmont, CO 303-651-6545 (Email: sales@automatics.com) Steve Beck

Atrump #AONE3VHG, 10" x 54" table, variable speed, one shot lube system, 70-4200 RPM, 3 HP, new, #SMAONE3VHG

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Atrump #K3V, 11" x 58" table, 3 HP, R8 spindle, 40-3/4" X, 17" Y, 19-5/8" Z, 4-7/8" quill, 3 HP, 70-4200 RPM, #5386

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Atrump #K4V, 11" x 58" table, 2 Axis Newall DP-7 DRO, 4200 RPM, 4 HP, 6" vise, pendant control.

Worldwide Machine Tool, Lewis Center, OH 614-496-9414 (Email: bill@worldwidemachinetool.com) Bill Garbe

Baileigh #VM-949-3, 9" x 49" table., 3 HP, 2-Axis DRO, 28" X, 12" Y, 16" Z, NST40, pneumatic PDB, #A5640

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Baileigh #VMD-30VS, 8" x 28" table., R-8, 7/16" x 20" PDB, 2 HP, vari-speed, t-slotted, coolant, #A5641

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Birmingham #BPS-1649-C, 9" x 49" table., 3 HP, 29" X, 12" Y, 14" Z, 2-Axis DRO, powered table feed, #A5941

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Birmingham #BPV-1054, ram type vertical mill, 10" x 54" table, 3 HP, R-8, 2000, #63982

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Birmingham #BPV-3949-C, 9" x 49" table, variable speed head, chromed ground quill, 60-4300 RPM, 3 HP, new, #SMBPV3949C

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Birmingham #BPV-3949-C, Bridgeport style vertical mill, 9" x 49" table, new

Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Email: sales@escohou.com) R.G. Escandon

Bridgeport #1-VS, vertical mill, 9" x 42" table, Newall DRO, Servo power feed

FMT Co, Hubbard, TX 817-714-9839 (Email: fmtco.mike@yahoo.com) Mike Frost

Bridgeport #131237, vertical mill, 9" x 42" table, 3 HP, Kurt power lock mechanical power draw bar, Bijur lubrication

Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-389-6449 (Email: amanda@1800lastbid.com) Amanda Bowers

Bridgeport #2J, 9" x 48" table., 2 HP, 36" X, 12" Y, 5" Z, V/S, R-8, Acu-Rite 2-Axis DRO, power table feed, 1971, #158866

Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

Bridgeport Series BR, 1-1/2 HP, 8" x 42" table, Dovetail ram type, vari-speed, 1969

Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Email: paequip@zoominternet.net) Tom Noone

Bridgeport Hardinge #EZ-Vision mill, 2-Axis conversational control, 9" x 42" table, 2 HP, 2007

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Bridgeport Series I, 9" x 42" table, 4200 RPM, 2-Axis DRO, power feed

Automatics & Machinery Co Inc, Longmont, CO 303-651-6545 (Email: sales@automatics.com) Steve Beck

Bridgeport Series I, vertical milling machine, 9" x 42" table, 2 HP, Sony 2-Axis DRO, #1562

Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

Bridgeport Series I, 9" x 48" table., 1.5 HP, 36" long, 12" cross, 16" knee, 5" quill, R8, #10751

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Bridgeport Series I, 42" x 9" table, DRO, 1.5 HP, chrome ways, power feed, s/n 12BR125085, #27197

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Bridgeport Series I, 3 HP, 9" x 48" table, Acu-Rite DRO, power feed, chrome, lube, USA made, 1991

New England Industrial Machinery, LLC, Newington, CT 860-680-9811 (Email: paul@neindustrialmachinery.com) Paul Gaffney

Bridgeport Series I, 9" x 49" Tbl, 2 HP, 60-4200 RPM, Trak DRO, X & Y power feeds, #5081

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Bridgeport Series I, vertical knee mill, 9" x 48" table, #14130

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Bridgeport Series I, 9" x 42" table., 2 HP, Trak DRO, 60-4200 RPM, variable speed head, #5453

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Bridgeport Series I, vertical knee mill, #12340

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Bridgeport Series I, vertical mill, 9" x 48" table, 2 HP, 5" quill travel, 500-4200 RPM, #14001

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Bridgeport Series I, 9" x 42" table., Mitutoyo 2-Axis DRO, servo power feed, work light

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Email: info@stevensmachinery.com) Randy/Jeff/Chris

Bridgeport Series I, vertical mill, 9" x 48" table, 2 HP, serial #243563

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Bridgeport Series I V-S, 4000 RPM, 9" x 48" table, HD B.P., power feed, 2AX readout, 2 HP, 2007

Lone-Star Machinery & Equipment LLC, Hempstead, TX 713-907-9996 (Email: hescoequip@msn.com) Bob Hess

Bridgeport Series I, 9" x 48" table., 2 HP, 36" X, 12" Y, 16" Z, Acu-Rite 2 Axis DRO, PDB, 2008

Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Email: johnm@myerstc.com) John Myers

Bridgeport Series I, vert.mill, 9" x 48" table, R-8, 2 HP, One shot lube, chrome ways, #71708

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Bridgeport Series I, 2 HP, 9" x 48" table, milling machine with DRO & power feed

Mullin Machinery, Farmingdale, NJ 732-566-1211 (Email: mullinmach@msn.com) Marcus Mullin

Bridgeport Series I, knee mill, 2 HP, AcuRite 111 DRO, chrome ways, vari-spd, S/N 132693 (5 available)

Northeast Precision Machinery Inc, Warminster, PA 215-672-8112 (Email: jim@northeastprecision.com) Jim Reddy

Bridgeport Series I, 42" & 48" tables, V/S, DRO's, 2 HP, rebuilt heads (4 available)

Alenco Tool Supply, Chicago, IL 773-725-5700 (Email: sales@alencotool.com) Paul Braeseke

Bridgeport Series I, 9" x 42" table., 2 HP, 30" long, 12" cross, 16" knee, 5" quill, 12" ram, Acu-Rite II 2-Axis DRO, #10424

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Bridgeport Series I, vertical mill, 9" x 42" table, 2 HP, R-8, tilt & swivel head, 1975, #67909

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Bridgeport Series I, vertical milling machine power feed, 9" x 42" table, 2 HP, 1985

Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

Bridgeport Series I, vertical knee mill, 9" x 48" table, #14131

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Bridgeport Series I, vertical milling machine, 9" x 42" table, 1-1/2 HP, serial #173239

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Bridgeport Series I, 9" x 49" table, 3 HP, 36" X, 12" Y, 16" Z, 4200 RPM, R-8, chrome ways, DRO, '19

Worldwide Machine Tool, Lewis Center, OH 614-496-9414 (Email: bill@worldwidemachinetool.com) Bill Garbe

Bridgeport Series I, 9" x 42" table., 2 HP, 30" long, 12" cross, 16" knee, V/S head, chrome & scraped ways, #C5140

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Bridgeport Series I, 9" x 42" table., 2 HP, 30" X, 12" Y, 16" Z, 60-4200 RPM, servo table power feed, #A5552

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Bridgeport Series I, vertical mill, 2 HP, (4) available

T.A.C. Assets, Fairborn, OH 937-477-7712 (Email: larry.beam@sbcglobal.net) Larry Beam

Bridgeport Series I, milling machine, 2 HP, powered infeed, table & height adjustment

Machinery International Corp, North Branford, CT 203-484-0400 (Email: sales@machyintl.com) Steve McMillan

Bridgeport Series I, vertical knee mill, 9" x 48" table, 2 HP, 5" quill travel, 500-4200 RPM, #14170

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Bridgeport Series I, vertical mill, 9" x 48" table, 2 HP, DRO, power longitudinal & cross feed

Victory Machinery Exchange, Lake Forest, IL 847-918-9797 (Email: sales@victorymachinery.com) Bob or Neal

Bridgeport Series I, 9" x 42" table, 2 HP, chrome ways, 6" universal Kurt vise, 1984, #45971

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

Bridgeport Series I, vertical milling machine, 9" x 42" table, 2 HP main drive motor, #63753

TDI Group LLC, Pittsburgh, PA 412-826-4950 (Email: sales@tdigrp.com) D. DiBenedetto

Bridgeport Series I, vertical mill, 9" x 42" Table, #12484

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Bridgeport Series I, vertical milling machine, 11" x 58" table, serial #EZ2057, 1997 (3 available)

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Bridgeport Series I, vertical mill, 9" x 48" T-slotted table, power feed, R-8, 2-Axis DRO, 2 HP, '84

Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales

Bridgeport Series I, vertical knee mill, 9" x 48" T-slotted table, 2 HP, AcuRite 2-Axis DRO

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Bridgeport Series I, vertical mill, 9" x 42" table, 60-4200 RPM, 2 HP, Sino DRO system, #8757P

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

Bridgeport Series I, 9" x 49" table., 2 HP, Trak 102 DRO, 8" mill vise, 7" riser block, X & Y power feeds

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Bridgeport Series I, 2 HP, vertical milling machine, #10425

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Bridgeport Series I, 9" x 49" table, 2-Axis DRO on all, 1-machine has power X, (4) avail

Sanson Machinery Group, Kirkland, WA 425-513-8263 (Email: aduenas@sansonmachinery.com) Ryan Ross

Bridgeport Series I, 9" x 48" table., 2 HP, 36" X, 12" Y, 16" Z, R8, Kexin KXB-2MS 2-Axis DRO, #10972

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Bridgeport Series I, 9" x 42" table., 2 HP, 30" X, 12" Y, 16" Z, Acu-Rite 2-Axis DRO, PDB, 1984

Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Email: johnm@myerstc.com) John Myers

Bridgeport Series I, 9" x 42" table., 2 HP, 16" vertical knee, 5" quill, 60-4200 RPM, #11430

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Bridgeport Series I, vertical mill, 9" x 42" table, 2 HP, 5" quill travel, 60-4200 RPM, #14000

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Bridgeport Series I, 48" x 9" table, 4200 RPM, 2 HP, R8 tpr, power feed, 2-Axis DRO, 7" riser, 1990

S & M Machinery Sales Inc, Warren, MI 888-547-4342 (Email: sales@usedmachinerysales.com) Spencer Minns

Bridgeport Series I, vertical knee mill, 42" x 9" table, 1-1/2 HP, One Shot lube, #67297

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Bridgeport Series II, 10" x 58" table, Quick Change 40 taper, excellent shape

Industrial Machinery Exchange, Cambridge, ON 519-622-8353 (Email: Pgeddes@machexch.com) Paul Geddes

Bridgeport Series II, 11" x 58" table., 4 HP, 30" long, 15" cross, 16" vert, vari-speed, #40, 1978, #155637

Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

Bridgeport Series II, vertical mill, 11" x 58" T-slotted table, power feeds, #40 tpr, 4 HP, 1977

Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales

Bridgeport Series II, vertical milling machine, 11" x 58" table, 4 HP, 1980

Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

Bridgeport Series II, 10" x 52" table, 4 HP, vari-speed, #40 Quick Switch spindle

Long Machine Tool Co, Ferris, TX 972-842-2207 (Email: longmachinetoolco@gmail.com) Ray Long

Bridgeport Series II, milling machine, 4 HP, 11" x 50" table, vari-speed, tooling, collets

Machine Central LLC, Denver, CO 303-632-8818 (Email: machinecentral@comcast.net) Andy Weiss

Bridgeport Series II, 11" x 58" table, 4 HP, power feed XYZ, chrome ways, excellent, '84, #45968

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

Bridgeport Series II, vertical knee mill, 11" x 58" table, 4 HP, #14186

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Bridgeport Series II, 11" x 58" table., 2 HP, special vert. knee mill, 33" long., 15" cross, 16" knee, DRO, #10440

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Bridgeport Series II, good condition

Schmidt Industries, Bay City, MI 989-684-3216 (Email: Schmidtind@aol.com) David Schmidt Sr.

Bridgeport Series II, 4 HP, 58" x 11" table, Newall Sapphire 2-Axis DRO

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Bridgeport Series II Special, 11" x 48" table, 2 HP, chrome box ways, power feed, #13518T

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

Bridgeport Series II 15/BR, vertical milling machine, chrome plated ways, 1981

Clark Machinery Sales LLC, Hunt Valley, MD 410-252-5494 (Email: sales@clarkmachinerysales.com) Troy Clark

Bridgeport Series II, vertical milling machine, 11" x 58" table, 3 T-slots, 4 HP, #40 taper, Acu-Rite DRO, coolant, #18870

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

Bridgeport Series II, vertical milling machine, 11" x 58" table, 4 HP, lubrication, coolant, #40 taper, 50-3500 RPM, #18063

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

Bridgeport Series II, 11" x 58" Table, 3-Axis power feed, Trionics Promax DRO, 4 HP, #8415JVP

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

Bridgeport Series II, 11" x 58" Table, 30" X, 15" Y, 15" Z, 4 HP, #40 QC Taper, 50-3500 RPM, under power #6795

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Bridgeport Series II, 11" x 58" table, 4 HP, vari-speed 50-3500 RPM, #40 taper, coolant (3 available)

Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

Bridgeport Series II, 11" x 58" table, 4 HP, 30" long, 15" cross, 16" vert, vari-speed, #157831

Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

Bridgeport Series II-Special, 11" x 58" table, 2 HP vari-speed, box ways, one shot lube, DRO

PM Machines, Huntington Beach, CA 714-892-9800 (Email: steve@pmmachines.com) S. Mataviesko

Bridgeport Series II-Special, 11" x 58" table, 2 HP, chrome box ways, R8 spindle, power feed, '88

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Bridgeport Series II-Special, vert.mill, 11" x 58" T-slotted table, 2 HP, 1 shot lube, #70518

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Bridgeport Series II-Special, 11" x 58" table, 2 HP vari-speed, box ways, AccuRite 2-Axis DRO

PM Machines, Huntington Beach, CA 714-892-9800 (Email: steve@pmmachines.com) S. Mataviesko

Bridgeport Series II-Special, 2-Axis DRO, 11" x 58" table, 30x15x16x5", 2HP, power X, air assist Z

520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Bridgeport #J, 9" x 42" table., 1 HP, 30" X, 12" Y, 16" Z, 5" W, power table feed, 3-tslots, R-8, step pulley, chrome, 1970, #158974

Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

Bridgeport #J-Head, 9" x 42" table, 5" Quill, R8 spindle, 80-2750 RPM, 6" Kurt vise, one shot lube, belt change head, #5387

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Bridgeport #J-Head, vert mill, 9" x 42" table, 1 HP, 80-2750 RPM, belt change, R-8, Bridgeport shaper, #5327

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Bridgeport #J-Head, 9" x 42" table, 2750 RPM, 1 HP, belt change, X-Axis, slotting attach, #3967

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Bridgeport #J-Head, vertical mill, DRO (2 available)

Machinery Network Auctions, Encino, CA 818-788-2260 (Email: Info@machinerynetworkauctions.com) Gary Treisman

Bridgeport #J-Head, 1 HP, belt change, 9" x 42" table, Sargon 2-Axis DRO, 6" mill vise, #5252

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Bridgeport #J-Head True-Trace complete milling machine, 1-1/2 HP, Bijur lubrication

Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-389-6449 (Email: amanda@1800lastbid.com) Amanda Bowers

Bridgeport #J-Head, 9" x 42" Tbl, 2720 RPM, 1 HP, rear mounted Bridgeport profile head, #4457

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Bridgeport #J-head, 9 x 36 table.R-8 spindle, screws & ways good. All prettied up!, FOB

WINN/DIXI Machine Tool Sales, Rockford, IL 815-874-4771 (Email: dickc@winndiximts.com) Dick Crosby

Bridgeport #Textron, 9" x 42" table., 3 HP, R-8, 30" long, 12" cross, 16" knee, 5" quill, Acu-Rite Millvision DRO

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

Bridgeport #UM50M2VV, Vertical knee mill, 9" x 49" Table, 3 HP, new, #13690

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Bridgeport #UM50M3BV, Vertical Knee Mill, 10" x 54" Table, #13691

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Bridgeport #II, tooling pkg, 19 pcs, Kwik-Switch 300 series, end mill hldrs, collet chucks, most new

J Hebert Machine Tool Co., Charlotte, NC 704-825-1511 (Email: Hebertmachtool@bellsouth.net) Jon Hebert

Bridgeport, vertical mill, S/N J-99557, #016456

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

Bridgeport, 1 HP, Vertical Mill, 30" x 12" x 5", 9" x 42" table, 2720 RPM, 1975

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Bridgeport vertical mill, 9" x 42" table, 2 HP, variable speed drive, power longitudinal feed, vise, collets, DRO

Victory Machinery Exchange, Lake Forest, IL 847-918-9797 (Email: sales@victorymachinery.com) Bob or Neal

Bridgeport vertical milling machine, knee type, 9" x 42" T-slot table, 1-1/2 HP, 60-4200 RPM, power cross feed, DRO

A & A Machinery Liquidations, Morrisville, PA 215-428-1100 (Email: aasales@aamachinery.com) Tim Cromwell

Brown & Sharpe #310 Dynamaster, 3" quill travel, 40-2400 RPM, 10 HP, wonderful, #6490

Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Email: mci@machineryconsultants.com) Bill Wilson

Chevalier #FM-3VKH, 10" x 50" PF table., 3 HP, 30.75" long, 12" cross, 16" knee, 12" ram, R-8 spindle, V/S, Acu-Rite 2-Axis DRO, #30512

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

Chevalier #FM-4VKH, vertical mill, 10" x 50" table, 32" longitudinal travel, 16" cross travel, 5" quill travel, 5 HP, NST 40 taper

Victory Machinery Exchange, Lake Forest, IL 847-918-9797 (Email: sales@victorymachinery.com) Bob or Neal

Chevalier #FM-5VKH, 11" x 52" table., 5 HP, 30" long, 19" ram, 5" quill, 15.3" knee, Sony 2-Axis DRO, 1998, #158589

Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

Chevalier #FM-32SP, vertical mill with CNC Proto Trak, 9" x 42" table, 3 HP, R8, #67709

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Chevalier Milling Machine, 9" x 48" table, Servo 150 Rapid Feed, Sony Millman DRO

Investment Recovery Services, Fort Worth, TX 817-222-9848 (Email: trevor@irsauction.com) Gregg Trenor

Cincinnati #2, vertical mill, 12" x 53" table, 3 Phase, 1990

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Cincinnati #2, mill, 12" x 53" T-slot table, 20-4000 FPM

A & A Machinery Liquidations, Morrisville, PA 215-428-1100 (Email: aasales@aamachinery.com) Tim Cromwell

Cincinnati #2, vertical mill, 65" x 16" table, #11925

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Cincinnati #3, vertical mill, 62-1/2" x 15-1/4" table, 10 HP, #50NS, rapid traverse, #69994

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Cincinnati Cinova #80, vertical mill, 12" x 56" table, 7.5 HP, #50 taper

Harrison Electric Inc, Michigan City, IN 219-879-0444 (Email: tom.har@comcast.net) Tom Walma

Cincinnati Cinova #205-12, vertical mill, 56.5" x 12" table, dual controls, 5 HP, #67458

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Cincinnati #3, 68.5" x 15.25" table., 15 HP, #50, 34" long, 16" cross, 6" head, 16" knee, #69727

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Cincinnati #315-15, vertical mill, 15" x 69" table, 15 HP, serial #4A3V5P-8, 1965

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Cincinnati Milacron #330-18 Verci-power, vertical mill, 18" x 72" table, 30 HP, 18-1600 RPM, 34" X, 16" Y, 24" Z, #50NSTD, #27050

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

Cincinnati Vercipower #330-18, vertical mill, mid 1970' s, #18348

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

Cincinnati #330-18-VerciPower, vertical mill, 18" x 72" table, 30 HP, 1971, rebuilt '00, #18346

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

Cincinnati #3MI, vert mill, 63" x 14" table, 34" travel, 18-450 RPM, 1/2-20 IPM, 10 HP, clnt, '50

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Cincinnati #4, 18" x 80" table, 50NS taper, 16-1600 RPM, 20 HP, 16" cr.tvl., 16" knee tvl., Acu Rite III DRO, 150 IPM, 1974, #16533

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

Cincinnati #4, vertical mill, 18" x 80" table, 30 HP, 16-1600 RPM, rapid traverse, #8385P

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

Cincinnati #420-18, vertical high power mill, 18" x 80" table, #12681

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Cincinnati Vercipower #530-20, vertical mill, 25" x 94-1/2" table, 30 HP, #50 taper

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Cincinnati Vercipower #530-20, vertical mill, 94.5" x 25" table, 30 HP, #50 taper

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Email: info@stevensmachinery.com) Randy/Jeff/Chris

Cincinnati Vercipower #550-20, vertical milling machine, 20" x 94.5" table, 50 HP, #50 taper, 50" longitudinal, 18" cross travel

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

Cincinnati Vercipower #550-20, vertical milling machine, 20" x 94.5" table, 50 HP, #50 taper, 50" long., 18" cross, 24" vert.travel, #18509

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

Cincinnati Vercipower #550-20, vertical mill, 94.5" x 20" table, #11371

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Cincinnati Vercipower #550-20, 20" x 94.5" table., 50" long, 18" cross, 50 HP, #50, #3604

Universal Metalworking Equip., Houston, TX 713-675-4145 (Email: sales@ume-inc.com) M. Feinstein

Cincinnati Vercipower #550-20, vertical mill, 94.5" x 20" table, #11370

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Cincinnati Vercipower #750-20, vertical mill, 116.5" x 20" table, #11358

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Cincinnati Vercipower #830-18, vertical mill, 25" x 128" table, 1970, #18347

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

Cincinnati Vercipower #830-25, bed mill, 25" x 128" table, 120" x 25" travel, 28" vert travel, 30 HP

Centra Corporation, Perry Hall, MD 410-945-0040 (Email: ed@centracorp.com) Ed/Mike/Thomas

Cincinnati #500 Series Hypowermatic vertical production mill, 22" x 94" table, 35 HP, 1980' s

Excel Machinery, Clinton Township, MI 586-298-2030 (Email: emm@excelmachinery.com) Vince Gerlando

Cincinnati #Milacron vert.mill, 16" x 72", 16-1600 RPM, #50 tpr, power feed, rapid traverse

Bibb Machinery Sales, Macon, GA 478-788-1975 (Email: rtruett@ymail.com) Robert/ John

Cincinnati Vercipower, power shifting speeds/feeds, auto., table cycle, clnt sys, 50HP, #6208

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

Cincinnati, vertical mill, 15" x 63" table, coolant sys, 1 Shot Lube system, 15 HP, #4554

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

Cincinnati, vertical mill, 10" x 42" table, 1 HP, 215-5600 RPM

Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Email: mci@machineryconsultants.com) Bill Wilson

Clausing #2VS, vertical milling machine, 9" x 49" table, 3 HP, new, 2019

Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

Clausing Kondia #FV-300, 11" x 58" table, 60-4000 RPM, 4 HP, box ways, R-8 spindle, DRO, 1998

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Clausing Kondia #FV-300, 11" x 58" table, 40-4000 RPM, 4HP, box ways, R-8 spindle, DRO, 1998

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Clausing Kondia, vertical milling machine, 10" x 50" table, 1985

Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales

DoAll #FV-2V Heavy Duty, power feed to table, power downfeed to quill, 12" x 49" table surface, 3 HP, #26858

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

Ekstrom-Carlson #540, high speed ram head vertical miller/router, 18" x 48" table, 5 HP

Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-389-6449 (Email: amanda@1800lastbid.com) Amanda Bowers

Enco Knee Mill, 49" table, 2 HP, shaper attachment, belt driven, one shot lubrication, collets, power feed, #7280

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Ex-Cell-O #602, vertical miller, 9" x 46" table, 2-Axis Acu-Rite DRO, auto quill feed, #3854

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Ex-Cell-O #602, 2-Ax DRO, power downfeed to quill, 9" x 48" table, 37X, 13Y, 16Z, 2 HP, #28193

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

Ex-Cell-O #602, vertical mill, 9" x 48" table, power table feed, PDF, 85-4000 RPM, 2 HP, #28768

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

Ex-Cell-O #602, 2-Ax DRO, power downfeed to quill, machine vise, 9" x 48" table, 37X, 13Y, 16Z, 2HP, #28194

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

Ex-Cell-O #XLO, 8" x 42" table, (2) 5.5" riser blocks, vari-speed, 100-3800 RPM, 2 HP, #4017

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Ex-Cell-O, ram type vert.mill, 9" x 48" T-sloted table, 2 HP, #40 tpr, power table feed, #66707

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Ex-Cell-O vertical turret mill, 9" x 36" table, vari-speed head, power feed to table, vise

Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Email: How@tznet.com) Fred Parker

First #LC-20VSG, 10" x 50" table, 5 HP, 2-Axis Heidenhain 2-Axis DRO, pendant control, #3913

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

First #LC-185VS, vertical milling machine, 10" x 50" table, 3 HP, 2-Axis Heidenhain DRO, #3914

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

First #LC1-1/2VS, 9" x 42" table, 2 HP, Heidenhain 2-Axis DRO, One shot lubrication, #3963

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

First #LC1-85VS, power feed tble, Heidenhain DRO, 3 HP, #47966

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

Ganesh #GMV-1, vertical milling machine, 9" x 42" table, 3 HP

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Heckert #FSS450X1800, vertical mill, 18" x 71" table, 20 HP, Newall C-80 DRO, 2000, #8773HP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

Hitachi #33, 63" x 14" table, 33-7/8" table travel, 25-1500 RPM, power draw bar, #15329

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Howa Sangyo #VM2A, vertical milling machine, 10-1/2" x 53" T-slot table, 84-1510 RPM

A & A Machinery Liquidations, Morrisville, PA 215-428-1100 (Email: aasales@aamachinery.com) Tim Cromwell

Hurco Hawk #30/DSM, 11" x 51" table., 5 HP, 35" X, 18" Y, 20" Z, #40, 3-Axis, Ultimax 4DSM, PDB, 2000, #11066

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Jet #ETM1050EVS, vert knee mill, 10" x 50" table, R-8, 5000 RPM, 3 HP, Acu-Rite 2-Axis DRO, clnt, chip pan, #10624

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Jet #JVM-942F, vertical milling machine, 9" x 42" table, 2 HP main drive motor, #63754

TDI Group LLC, Pittsburgh, PA 412-826-4950 (Email: sales@tdigrp.com) D. DiBenedetto

Jet, 9" x 49" table, 3 HP, 36" X, 12.625" Y, 15.75" Z, Acu-Rite 200S 2-Axis DRO, V/S, '13, #81526

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

KBC, tool room milling machine, #7302

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Kearney & Trecker #2H, vertical miller, serial #1-8325

Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Email: paequip@zoominternet.net) Tom Noone

Kearney & Trecker #4CH, vertical mill, 74" x 15-1/2" table, 10 HP, power draw bar, #69650

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Kearney & Trecker #215TF-16, 16x62" table, 31" long., 16" cross, 18" knee, 6" head, 15-1500 RPM, #50NST

Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Email: mci@machineryconsultants.com) Bill Wilson

Kearney & Trecker #310TF, vert mill, 14" x 68" table, 1500 RPM, 10 HP, Newall C80 DRO, #8409HP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

Kearney & Trecker #315TF-16, vertical mill, #11221

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Kearney & Trecker #415S-15, 15" x 76", 42" long.table travel, auto lube sys, 15 HP, #5876

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

Kearney & Trecker #430TF-16, 16" x 72" table., 34" long, 12" cross, 18" vert.knee, PDB, #71081

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Kearney & Trecker #430TF-20, vertical mill, #12555

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Kearney & Trecker #D, rotary head mill, thread nose adapter, power knee, DRO, 440 V., #6865

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Kent #KTM-4VVF-E, manual knee mill, 12" x 50" table, R-8, DRO, chip pan, 3 HP, new, #12799

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

Kent #KTM-5VVF-E, manual knee, 12" x 50" table, NMTB-40 spindle taper, air power drawbar, flood clnt system, 5 HP, new, #12800

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

Kiheung #KMB-U6, 21" x 87" table, 62" X, 28.5" Y, 25.5" Z, 40-1600 RPM, 20 HP, ISO 50, DRO, #3966

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Kingston #KMT-5V, 10" x 50" T-slotted table, PF, #40 taper, 2-Axis DRO, hardways, 2000

Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales

Kingston #KMT-SV, vert milling machine, 10" x 50" T-slotted table, 40 taper, power drawbar, Newall 3-Axis DRO, well tooled

Stone Auctioneers & Appraiser, Carrollton, AL 205-373-1130 (Email: melynne@stoneauctioneers.com) Melynne Stone

Knuth #MF-1V, universal, 49" x 9" table, 30" X, 11" Y, 3 HP, 3600 RPM, ballscrews, 3-Axis DRO, 2008

AMTAC Corp, Erie, PA 814-838-4629 (Email: russtaccone@gmail.com) Russ Taccone,Jr.

Kondia #FV-1, 9" x 42" table., 3 HP, 30" long, 15" cross, 16.5" vert., 23" ram, V/S, Kurt PDB, Newall 2-Axis DRO, #A5776

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Kondia #FV-1, milling machine, SWI Age 2 Proto-Trak Control

Dominion Air & Machinery Co, Roanoke, VA 540-344-8733 (Email: stevenson@dominionair.com) Robert Stevenson

Kondia Powermill, 9" x 49" table., 31" long. table. tvl., 12" cross tvl., 16-1/2" knee tvl., 5/8" T-slots, R8 taper, 2 HP, 3000 RPM

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Lagun #310, CNC knee mill, 3-Axis, 9" x 49" table, Mach Motion retro 2019, warranty

Automatics & Machinery Co Inc, Longmont, CO 303-651-6545 (Email: sales@automatics.com) Steve Beck

Lagun #FT-1, step pulley, 42" x 9" table, 49-2440 RPM, 2 HP, 6" vise, #5316

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Lagun #FTV-1, ram type vertical mill, 9" x 42" table, 3 HP, One shot lube, R-8, #61424

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Lagun #FTV-1, vertical milling machine, Anilam Spirit II, Davi motor 2.2 KW, 220/440 V., 8.2/4.1 amps, 1720 RPM, 60 Hz

Ideal Machinery Inc, Holly, MI 248-627-3135 (Email: caitlin@idealmachinery.com) Caitlin Demasellis

Lagun #FTV-1, vertical milling machine with power feed

Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

Lagun #FTV-1, vertical mill, 10" x 44" table, power feed, One Shot Lube, plumbed for coolant, 3 HP

Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

Lagun #FTV-1S, 10" x 44" table, 3 HP, 16" cross travel, power draw bar, s/n #27005, #82208

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Lagun #FTV-1S, ram-type, 10" x 44" table., 3 HP, 30" X, 16" Y, 16" Z, R8, Mitutoyo 2-Axis DRO, 6" Kurt vise, 1986, #11068

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Lagun #FTV-2, 10" x 55.25" T-slotted table, 5 HP, 15.98" cross, 15.98" knee, 22.44" ram travel, '02

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Lagun #FTV-2, 10" x 50" table, 3 HP, 4250 RPM, vari-speed, X-Axis power feed, #5399

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Lagun #FTV-2, 10" x 50" table, DRO, PDB, power X feed, vari-speed, #34034

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Lagun #FTV-25-E, vertical mill, 50" x 10" table, 5" quill, 3 HP, 55-4250 RPM, R-8, #016480

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

Lagun #FTV-2S, 10" x 50" table, Servo II, DRO, 16" x 18" x 16", 5" quill, 3 HP, 4250 RPM, #82383

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Lagun #FTV-3, 11" x 58" table, vari-speed, R-8, Servo II feeds, 3 HP, Mitutoyo 2-Axis DRO, '80, #157655

Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

Lagun Republic #FTV-4, 58" x 11" table, 15" cross, 39-1/2" long, 17" vert, chr.quill, 1-shot lube (3 available)

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Lagun #FTV-4E, 58" x 11" table., 38" long, 15.5" cross, 16.75" vert, 22-3/16" ram, 4 HP, '90, #158011

Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

Lagun #FTV-4L, 2-Axis Anilam, 11x58" table, 60-4200 RPM, #40NSTQC, hard & ground sq.ways

Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Email: mci@machineryconsultants.com) Bill Wilson

Lagun #FU5-LA, vertical mill, #016460

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

Lagun #MillMatic-310, 10" x 50" table, #40 tpr, harden square ways, X-Axis power feed, refurb

PM Machines, Huntington Beach, CA 714-892-9800 (Email: steve@pmmachines.com) S. Mataviesko

Lagun Republic, Milling Machine, DRO, power feed vice, nice quiet, excellent condition

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

Lincoln #3KVHD, vertical miller, 10" x 50" table, power feed, 3 HP main drive motor, #64346

TDI Group LLC, Pittsburgh, PA 412-826-4950 (Email: sales@tdigrp.com) D. DiBenedetto

Litian #3V11, vertical mill w/induction motor, 3 HP, Acu-Rite DRO

Ideal Machinery Inc, Holly, MI 248-627-3135 (Email: caitlin@idealmachinery.com) Caitlin Demasellis

Long Chain Machinery #RB-1, vertical mill, 3 HP, power feed longitudinal & cross, serial #7705472, #28012

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

Magnum-Cut #3VS, vertical milling machine, 10" x 54" table, 3 HP, one shot lube, new, #3477

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Manford #SP-150VSL, 9" x 48" table, vari-speed 500-4500 RPM, built-in coolant, DRO, '02 (6 available)

Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

Maximart #2VS, vertical mill, 9" x 49" table, 3 HP, R-8, one shot lubrication sys, new, #3472

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Maxport, 9" x 42" table., R-8, 220/440 V., 2 HP, 80-2720 RPM, DRO, power table., one shot lube

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

Mighty Comet #3KVHD, 10" x 50" table, 3 HP, 2-Axis DRO, vari-speed, X-Axis power feed, vise, '94

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Mighty Comet #3KVHD, 10" x 50" table, 3HP, 2-Axis DRO, vari-speed, X-Axis power fd, draw bar, '97

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Mighty Comet #5KVHD, vertical knee mill, 10" x 50" table, 5 HP, s/n #94606, 1994, #70538

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Millman, 50" x 10" table, 3 HP, 36" X, 12" Y, 16.5" Z, X-Axis power feed

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Millport, vertical mill with SWI Protrak control, 3 HP, #67599

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Milwaukee #4, DRO's, 8" plain base vise, from service, 1948, Tag #15418

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

MSC vertical milling machine, knee type, 10" x 52" T-slot table, 3 HP, 70-3600 RPM, DRO

A & A Machinery Liquidations, Morrisville, PA 215-428-1100 (Email: aasales@aamachinery.com) Tim Cromwell

MSC vertical milling machine, knee type, 10" x 52" T-slot table, 3 HP, 70-3600 RPM, DRO

A & A Machinery Liquidations, Morrisville, PA 215-428-1100 (Email: aasales@aamachinery.com) Tim Cromwell

OKK #MH-3V, vertical mill, 15" x 65" T-slotted table, 3 T-slots, (12) 45-1600 RPM

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Parkson #1500V2, vertical mill, 68.25" x 16" table, 27-1600 RPM, dual control, 1989, #51715

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Parkson #M1250, vertical milling, 49" x 12.75" table., 0-2450 RPM, 7.5 HP, ISO 50

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Pinnacle, 10" x 50" table, R-8, 3 HP, power feed, coolant sys, hardened & ground, 1 yr warranty

Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Email: johnm@myerstc.com) John Myers

Polamco #4, 78" x 15.75" table, 41-3/4" table travel, 15 HP, #50 NS taper, #52634

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Richon, 13" x 54" table, 3-Axis power.feed & DRO, 40" long., #40 taper, 5 HP, 2008, #38607

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

Royal #2S, 9" x 42" table., 2 HP, 26" long., 12" cross, 16" knee, Step-Pulley, R-8, 2-Axis DRO, power feed, 1992, #158719

Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

Webb #3VH Champ 3, Fagor 2-Axis DRO, 3 HP, extra wide knee, 10" x 50" bed, 36" X, 15.25" Y, 15" Z, #R8, 760-4200 RPM, #27683

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

= photo available Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller Video

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search