Browse: Machinery Electrical

Machinery & Equipment >

Measuring Machines (Cmm'S) >

Measuring Machines (Including Coordinate Measuring Machines Cmm's)

MEASURING MACHINES (Including Coordinate Measuring Machines CMM's)

There are 146 listings in this category
Update: Thur, Dec 5, 2019 16:03:22

Advanced Search

Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added

Get email recent listings for
Measuring Machines

Original Sort

Aberlink #Axiom-Too CMM, X-640mm, Y-600, 900, 1200, 1500mm, Z-500mm, 300 or 500kg table load

MX Machinery, Las Vegas, NV 516-209-3434 (Email: info@mxmachinery.com) Joseph Curshen

Adcole #1200, crankshaft/camshaft cylindrical CMM, up to 180", 1999

MX Machinery, Las Vegas, NV 516-209-3434 (Email: info@mxmachinery.com) Joseph Curshen

Bendix #Portage-76B, 76" X, 56" Y, 56" Z, horizontal arm measuring machine

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner

Brown & Share #765-DCC, CMM, 28" X, 24" Y, 20" Z, PCDMIS CAD++, 2011, #10511

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Brown & Sharpe #9-15-9, CMM, PCDMIS, 60" x 40" x 35" capacity, mint condition

Roberts Machinery Sales, Ferndale, MI 248-543-4466 (Email: rmsused@aol.com) Kimball R Roberts

Brown & Sharpe #Cygnus-14.12.10, 40" x 40" x 40" capacity, 1998, #4953

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Brown & Sharpe #DEA-Vento CMM, 200" x 56" x 80", PC-DMIS 3.5, 1999, #29851

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Brown & Sharpe #Gage-2000 DCC, 18" x 20" x 16", PC-DMIS CAD software, 2003, #70291

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Brown & Sharpe #Global-Adv-12.15.10, 1200x1500x1000mm, Hexagon B3C control, PC-DMIS CAD++, 2007

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Brown & Sharpe #Global-Advan-5.7.5, 500x700x500mm, Hexagon GC2 control, PC-DMIS CAD++

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Brown & Sharpe #Global-Advantage-9-12-8, GC2 Global control sys, thermal comp, ref sphere, 2007

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Brown & Sharpe #Global-Advantage-12.22.10, DCC, 1200mmx2200mmx1000mm, DC800 controller

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Brown & Sharpe #Global-Advantage-15-22-10, scanning, 59x87x39", probe head, '07, #32398

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Brown & Sharpe #Global-FX7.10.7, 700x1000x650mm, Hexagon FB2 control, PC-DMIS CAD, 2004

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Brown & Sharpe #Global-Image-7.10.7, 27.5" x 39.4" x 26", PCDMIS 3.5, Renishaw SH600, 2003

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Brown & Sharpe #Global-Image-9.15.8, 35.4" X, 59" Y, 31.5" Z, PC-DMIS Cad, PH10MQ probe, 2003

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Brown & Sharpe #Global-Image-15.22.10, CMM, 59" X, 86" Y, 39" Z, PCDIMIS 2018 CAD++, 2005

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Brown & Sharpe #Global-Performance-5.7.5, Hexagon control, TesaStar probing, PC-DMIS CAD

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Brown & Sharpe #Global-Performance-9-20-8, 80x36x32", PC-DMIS CAD++, PH10MQ probe, #32334

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Brown & Sharpe #Global-Performance-12-15-10, CMM, 3-Axis, 47.2" X, 59" Y, 39.3" Z, Joy Stick Controller, 2006, #7282

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Brown & Sharpe #Global-Performance-9-15-8, CMM, 3-Axis, 35.43" X, 59.05" Y, 31.49" Z, 42" x 87" x 9" granite surface plate, 2006, #7281

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Brown & Sharpe #Global-Performance-9.12.8, DCC CMM, 35.4" X, 47.2" Y, 31.5" Z, PCDMIS, '10

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Brown & Sharpe #Global-Performance-9128, 900x1200x800mm, FB2 DCC control, TesaStar probing, '10

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Brown & Sharpe #MicroHite, 457x508x419mm, TesaStar manual articulating probing, PC-DMIS, 2013

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Brown & Sharpe #MicroVal, 12" x 18" x 12", Renishaw, stand, PC-nice

Performance Machine Tools, Fremont, CA 510-249-1000 (Email: sales@permach.com) Robert Kroha

Brown & Sharpe #MicroVal DCC, 400x500x400", Renishaw controller & probe head, rebuilt

520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Brown & Sharpe #MicroVal-PFX4.5.4, DCC, 16" x 18" x 14", PCDMIS 3.7, Renishaw PH10M

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Brown & Sharpe #MicroXcel-PFX-7.10.5, DCC, 700x1000x500mm travels, PC-DMIS, Brown & Sharpe control

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Brown & Sharpe #ONE, 1.16m x 1.45m table, probe and attach., PC and access., 2005

MX Machinery, Las Vegas, NV 516-209-3434 (Email: info@mxmachinery.com) Joseph Curshen

Brown & Sharpe #ONE-7.7.5, FB2 control, TesaStar probing, PC-DMIS CAD

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Brown & Sharpe #ONE-7.10.7, CMM, 27.6" x 39.4" x 25.6", TesaStar probe head, 2006

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Brown & Sharpe #ONE-7/7/5, DCC CMM, PCDIMIS CAD++, Renishaw PH10M probe, 2004

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Brown & Sharpe #ONE-7107, 700x1000x650mm, DCC control, Renishaw PH10M & TP20, new PC-DMIS CAD

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Brown & Sharpe #ONE-775, 700x700x500mm, FB2 DCC control, Renishaw PH10T & TP20, new PC-DMIS CAD

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Brown & Sharpe #Oryzo Horizontal Arm, Sharpe 32 DCC control, Renishaw probing, PC-DMIS CAD

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Brown & Sharpe #Oryzo-Cantilever CMM, 147" x 148" x 146", PH10 probe, PCDMIS, '95, #28759

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Brown & Sharpe #PFX-454, Brown & Sharpe FBII control, TesaStar-M probe head, PC-DMIS PRO, 2014

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Brown & Sharpe " Gage 2000" #Reflex-454, 18" X, 20" Y, 16" Z, Renishaw TP-ES probe, pendant computer, 1998, #158532

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt

Brown & Sharpe # SF 4.5.4 DCC, Shop Floor CMM, PC DMIS CAD, Tesastar motorized probe, Raco plate, probe change rack, 2015

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Brown & Sharpe #Surfcom surface texture measuring instrument, #10306

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Brown & Sharpe #Xcel-7.10.7, DCC, 25.5" x 39.4" x 25.5" XYZ, 1995, Upgraded 2008

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Brown & Sharpe #Xcel-9.15.9, 35.4" x 59.1" x 35.4", PH10MQ probe, SCR-200 chng rack, PCDMIS CAD

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Brown & Sharpe #Xcel-12.20.10, DCC, 1200mm x 2000mm x 1000mm XYZ, retrofit 2016

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Cordax #D-8 Discovery Series, CMM

T.A.C. Assets, Fairborn, OH 937-477-7712 (Email: larry.beam@sbcglobal.net) Larry Beam

Criterion #PEGASYS, with Renishaw Ph5 probe, S39095

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

DEA Hexagon #Global-Advantage-15.20.14, 5" x 79" x 55", PC DMIS Adaptive scanning s/w, '14

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

DEA / Diamond #IOTA-1102, CMM, Renishaw probe & accessories

Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

DEA #Lambda, 6000x6000x2000mm XYZ, DEA B6CS control, TesaStar probing, PC-DMIS CAD++

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

DEA #Lambda-SP60.60.20, 236" X, 236" Y, 78, 74" Z, DEAC B6CD control, dual Y axis drives, new, '12

CIM Technologies Inc, Livonia, MI 734-513-2525 (Email: fox@cnc-mills.com) Steve Fox

DEA #Lambda-Sp-60.60.20 Gantry, 268", 268", 78", new

RAAR Group USA, Redondo Beach, CA 310-487-3800 (Email: Rick.raargroup@gmail.com) Rick Schotts

DEA #Lota-1203, CMM, 3-Axis, 51.9" X, 38.1" Y, 24" Z, #7468

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

DEA #Scirocco-30.13.10, Hexagon control, Renishaw probing, PC-DMIS CAD

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Fanamation #1004040-PH10M/TP7, gantry CMM, installed, calibrated, 1 year warranty

Intelligent Measurement, Inc., Van Nuys, CA 818-901-6787 (Email: farshad@intelmeas.com) Farshad Farzan

Faro Arm #Quantum-S, 7-Axis, 98.42" measurement range, CAM2, Tri-Pod base, 2017, #29711

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Fellows #12M, involute measuring instrument, 12" capacity, S40281

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Fellows #12M, lead measuring instrument, 12" capacity, S40279

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Giddings & Lewis Sheffeid #RS-150, DCC CMM, 80" X, PH-10 MQ probe, PC Dmis, approx 1990

Machinery Network Auctions, Encino, CA 818-788-2260 (Email: Info@machinerynetworkauctions.com) Gary Treisman

Hexagon #7545SI, Romer Absolute 7-Axis 3D scanning & probing arm, 14.8' range, 2017

ACT Inc, Fullerton, CA 714-441-1992 (Email: rsg@actmachinery.com) Randy Goodman

Hexagon #RA-7525-3 Romer Arm, 8.2' measuring range, 0.0008" point repeatability, custom inspection table, 2015

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Hexagon Metrology #RA-7525 Romer Arm, 8.2' measuring range, hardly used, 2016

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

IMS #Impact, 500x600x400, Renishaw controller and probe head, rebuilt

520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Keyence #XM-C1000 CMM, 11.81" x 9.84" x 5.91", (2) controllers w/probe tips, calibration tool, threaded clamps, 2017

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Leitz Micra #543 DCC, 19.7" x 15.7" x 11.8", FB II controller, probe head, PCDMIS CDA++, '11

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

LK #Ascent-8.7.6, Pantec DCC control, Renishaw probing, Poylworks software

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

LK #Evolution-40.15.12, 1500x4000x1200mm,, Renishaw PH10MQ/TP20, new PC-DMIS CAD

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

LK #G80, 323" X, 138" Y, 101" Z, 2-granite work transfer stations, probe, 1995, #15877

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

LK #G80K, 182" x 82" granite table, 93" btwn columns, 48" vert, PH10 probe, PC upgrade, #25059

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

LK #G90C, CMM, 48" X, 50" Y, 30" Z, LK WinCMES V24.1 Software, WinCMES 32Bit V5.3 patch 3

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

LK #G90C, 120x60x40", LK Camio studio, CMM manager, Metris WinCMES, probe, '00/'08

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

LK #Metris-Libero-15.10.8, LK DCC control, Renishaw probing, LK Metris software

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

LK Metrology 4, CMM, 98" x 44" x 57" travels, Renishaw UCC T3 Control, 2000

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

LK Metrology #Evolution-12/20/10, 48" X, 80" Y, 40" Z, PH10MQ mtrzd probe, 2007, #158683

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt

Mahr Metrology #DIGIMAR-817-CLM, height measurement instrument w/Dynamic probing

MX Machinery, Las Vegas, NV 516-209-3434 (Email: info@mxmachinery.com) Joseph Curshen

Metronor One #552SQF, measuring volume, 2012

520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Mitutoyo #Apex-9.16.6, 900x1600x600, Renishaw controller & probe head, rebuilt

520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Mitutoyo #Apex-CRT-A916 CMM, 35" X, 39" Y, 23" Z, 46" BC, Renishaw PH10MQ probe, #30029

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Mitutoyo #B04B, manual, 20" X, 16" Y, 12" Z, 34" x 34" work table area, 80 psi, 40 cfm, Renishaw PH probe head, #150327

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt

Mitutoyo #BH-305, coordinate measuring machine

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Mitutoyo #BH-305, CMM, 20" x 12" x 16" capacity, Renishaw probe, air filter, Kaeser dryer, 1996

Performance Machine Tools, Fremont, CA 510-249-1000 (Email: sales@permach.com) Robert Kroha

Mitutoyo #BH-305, 12" x 20" x 12" travels, Geopak software, Renishaw PH1 probe

Machinery Network Auctions, Encino, CA 818-788-2260 (Email: Info@machinerynetworkauctions.com) Gary Treisman

Mitutoyo #BHN-710 CMM, 28" X, 59" Y, 24" Z, 2200 work wght, Renishaw PH10M probe, #30030

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Mitutoyo #BHN-1010L DCC, 40" x 40" x 24" travels, Geomeasure v2.1 software, Renishaw PH9 probe, digital control

Machinery Network Auctions, Encino, CA 818-788-2260 (Email: Info@machinerynetworkauctions.com) Gary Treisman

Mitutoyo #Bright-12.20.10, DCC control, Renishaw probing, Metrologic X4

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Mitutoyo #Bright-710, DCC CMM (2 Available)

Machinery Network Auctions, Encino, CA 818-788-2260 (Email: Info@machinerynetworkauctions.com) Gary Treisman

Mitutoyo #Bright-710, DCC CMM (2 Available)

Machinery Network Auctions, Encino, CA 818-788-2260 (Email: Info@machinerynetworkauctions.com) Gary Treisman

Mitutoyo #Bright-Apex-12.30.10, DCC, 1200mm x 3000mm x 1000mm XYZ travels, 2000

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Mitutoyo #Bright-Apex-707 DCC, 28" x 28" x 24" travels, Geomeasure v2.1 software, Renishaw PH10 probe UCC control

Machinery Network Auctions, Encino, CA 818-788-2260 (Email: Info@machinerynetworkauctions.com) Gary Treisman

Mitutoyo #Bright-Apex-710, 28" x 39" x 24", Renishaw PH10M, probe head TP200, monitor, 2007

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Mitutoyo #Bright-M507, 20" x 28" x 16" travels, Geomeaure software, PH1 probe

Machinery Network Auctions, Encino, CA 818-788-2260 (Email: Info@machinerynetworkauctions.com) Gary Treisman

Mitutoyo #Bright-Strato-707, DCC CMM, 27.6" X, 27.6" Y, 23.6" Z, Renishaw PH10M, 2006

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Mitutoyo #Bright-Strato-1620 DCC, 63" x 79" x 47" travels, Geomeasure v2.1 software, Renishaw PH10M probe, UC240 control

Machinery Network Auctions, Encino, CA 818-788-2260 (Email: Info@machinerynetworkauctions.com) Gary Treisman

Mitutoyo #Bright-Strato-A707, M COSMOS 3, 705x705x605mm, Renishaw PH10M & TP20

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Mitutoyo #Crysta Apex S 12.30.10, DCC, 47" x 118" x 39.3", Renishaw PH10MQ probe, 2013

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Mitutoyo #Crysta-Apex-S123010, 64" x 13' table., 118" X, 47" Y, 39.3" Z, Renishaw 272F30, 2013

Plant & Machinery Inc, Houston, TX 713-691-4401 (Email: robertb@pmi-auction.com) Robert Brundage

NDI Optotrak #PRO-Series-2000, PowerInspect Lite Software, Transport Case

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Nikon #Inexiv-VMA-4540, CNC video measuring sys, 17.7" x 15.7" x 7.9" measure range, S38864

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Numerex #2424-18, 24" X, 24" Y, 18" Z, linear +/-.0002", volumetric +/-.0006, 50x50x86, rebuilt, '95

Alliance Metrology Inc, Maple Grove, MN 763-493-0026 (Email: Jeff@alliancemetrology.com) Jeff Kreckow

OGP #Smartscope-Quest-600, optical & touch probing, MeasureMind 3D v. 15.3

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

OPTIV #Classic-321-GL-TP, 44 lb.max piece, 11.8x7.8x.5.9", PC-DMIS Pro DCC Vision, '09

520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Poli Globo #30.15.15, horiz.arm, 118" X, 59" Y, 59" Z, rail type, refurbished, 2007, #24211

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Poli Globo, CMM, 96" x 48" granite surface plate, #10616

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Ram Sprint #100 Optical Measurement System, auto check processing sys., PC w/operating software, s/n #R0S1001016

T.A.C. Assets, Fairborn, OH 937-477-7712 (Email: larry.beam@sbcglobal.net) Larry Beam

Romer Absolute #7525SI, RS laser scanner, PC-DMIS, probes

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Sheffield #5000 Cordax Measuring Machine, 110 V, 1 Ph, Metronics Quadra-Check 3000 digital display & control panel

A & A Machinery Liquidations, Morrisville, PA 215-428-1100 (Email: aasales@aamachinery.com) Tim Cromwell

Sheffield #Discovery-D12, 20" x 36" x 16" travels, Renishaw MH20i, 2005, #32375

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Sheffield #Discovery-II-D-12, 508x915x406mm, Renishaw MH20i/TP20, PC-DMIS, 2015

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Sheffield #Discovery-II-D-28, DCC CMM, 30" X, 36" Y, 20" Z, PH10T probe, PHC10-2 control, '01

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Sheffield #Discovery-III-D12, 20" X, 36" Y, 16" Z, SMP DCC, TesaStar probe, PC-DMIS CAD, '11

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Sheffield #Endeavor-9.15.10, 35" x 59" x 39" measure range, 2007, S39270

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Sheffield #Endeavor-II-9.9.7, 35" x 35" x 27", PCDMIS CAD++ 2015 s/w, Renishaw probe, '07

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Sheffield #RS-150, CNC CMM, Renishaw PH10T probe, Renishaw TP6 5-Axis probe, #28955

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Sheffield #RS150, 1200x2000x1000mm, Hexagon control, PH10MQ & TP6, PC-Dmis Cad

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

SNK #MD2000 Digitizer, 11000 lb.table load, 157.5" X, 78.75" Y, 27.5" Z, 472.4 IPM, Ren probe

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

TolTec Microimage measurerer #TTC50LS-T45D-21061 EDM tooling, #151448

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt

Walter Optical CNC measuring machine

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

Wenzel #LH65, 650x750x500mm XYZ, WPC-2030, Renishaw PH10M&TP200, openDMIS s/w, '05

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Wenzel #LH87, DCC CMM, Renishaw PH10T probe head, Renishaw PHC10-2 control

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Wenzel #LH108, coordinate measuring machine, CNC bridge design 3-D CMM

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Wenzel #LH108, Renishaw MODUS, 1000x2500x800mm, Renishaw REVO probing

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Wenzel #LH1210, 1200x2000x1000mm, Renishaw PH10T&TP20, OPENdmis 5.5

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Wenzel #XOrbit-87, 800x1000x700mm, PC-DMIS CAD, Renishaw PH10M & TP20'

CMMXYZ, Mississauga, ON 800-606-9266 (Email: sales@cmmxyz.com) Jim Jewell

Werth #Scopecheck-400/200/200S/Z 3D CNC, high performance multisensor CMM, 2014

Bid Specialists, Inc., Newbury, MA 978-590-6726 (Email: emmalodell@gmail.com) Emma Odell

Zeiss Vista #1620-14 DCC, bridge type, 400mm-X, 500mm-Y, 350mm-Z, Renishaw probe, '03

Adams Machinery Co, Lake Bluff, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn

Zeiss #Accura-7/9/5, DCC CMM, 27.5" X, 35.4" Y, 19.7" Z, Zeiss C99 Control, Calypso Software, 2007

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Zeiss #Accura-II-RDS-12/18/10, DCC CMM, Vast XXT TL3 18 pin scanning head, 2012

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Zeiss #C400, 15" X, 18" Y, 12" Z, Nikon CMM Manager s/w, rebuilt, 6 month warranty, 1994

Alliance Metrology Inc, Maple Grove, MN 763-493-0026 (Email: Jeff@alliancemetrology.com) Jeff Kreckow

Zeiss #Contura CMM, 27.5" x 27.5" x 23.6", Zeiss XXT sensor, Calypso s/w, joystick, '17, #28338

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Zeiss #Contura-7.7.6, 27.6x27.6x23.6", Zeiss Vast XT scanning probe hd, Calypso s/w, '00

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Zeiss #Contura-10.12.6, Vast DT Dyna touch probe, 39.4" X, 47.2" Y, 23.6" Z, 2015

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Zeiss #Contura-C-G2-Active-10/12/6, scanning, 39.4" x 47.2" x 23.6", updated software, 2008

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Zeiss #Contura-G2-7/10/6-Aktiv, 27.6x39.4x23.6", Vast XT probe, Calypso 5.6, '10, refurb'13

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Zeiss #Contura-G2-10/12/16 Activ CMM, 39.4" x 47.2" x 23.6", 2015 Calypso s/w, joystick, '08

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Zeiss #Duramax-5/5/5, 20" X, 20" Y, 20" Z, Vast XXT scanning probe, Calypso software, 2017

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Zeiss #Eclipse-550, 19.69" x 19.69" x 21.65", linear+/-.00012, volumetric+/-.00022, rebuilt, '00

Alliance Metrology Inc, Maple Grove, MN 763-493-0026 (Email: Jeff@alliancemetrology.com) Jeff Kreckow

Zeiss #Eclipse-2828, DCC CMM, 28" x 28" x 20", Calypso 5.6 s/w, C99 controller, MIH probe, '98

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Zeiss #Eclipse-282820, CMM, 28" X, 28" Y, 20" Z, Calibrated March 2018

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Zeiss #Eclipse-2840-20, 28" X, 40" Y, 20" Z, CNC C99 control, rebuilt, 6 month warranty, 1999

Alliance Metrology Inc, Maple Grove, MN 763-493-0026 (Email: Jeff@alliancemetrology.com) Jeff Kreckow

Zeiss #Eclipse-4084-2024, CMM, 40" X, 84" Y, 24" Z, 48" x 96" table, Renishaw PH10M Probe, 1996

Advanced Jones Machinery Co, Dayton, OH 937-278-7337 (Email: bgibson@advancedmachinery.com) Bob Gibson

Zeiss #FC-900, horizontal arm CMM, completely enclosed, Active measuring probe

MX Machinery, Las Vegas, NV 516-209-3434 (Email: info@mxmachinery.com) Joseph Curshen

Zeiss #MMZ-G-30-40-30, 118" X, 157.5" Y, 118" Z, workpiece 3439mm W x 3535mm H, '11

Gibbs Industries Ltd, Royal Oak, MI 248-680-1000 (Email: sales@gibbsind.com) Jamie Gibbs

Zeiss #MMZ-G-4000/6000/3000, gantry style CMM, 157.6" X, 236.4" Y, 118.2" Z, C99, 2008

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Email: info@stevensmachinery.com) Randy/Jeff/Chris

Zeiss #Prismo, bridge CMM, with probes & attachments, PC & accessories, UMESS s/w

MX Machinery, Las Vegas, NV 516-209-3434 (Email: info@mxmachinery.com) Joseph Curshen

Zeiss #Prismo-9.12.7, 35" x 47" x 27" measuring range, Vast XT scanning head, C99 control, 2007

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Zeiss #Prismo-7.9.5, CMM, 28" X, 36" Y, 20" Z, Vast Gold Probe, C99N Controlr, remanufactured 2017

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Zeiss #Prismo-9/18/7, DCC CMM, 35.4" X, 70.8" Y, 27.6" Z, Vast Gold D2 scanning, C99 Control, '04

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Zeiss / Numerex coordinate measuring machine, 24" x 24" x 18" measuring range, Renishaw PH1 probe

T.A.C. Assets, Fairborn, OH 937-477-7712 (Email: larry.beam@sbcglobal.net) Larry Beam

Back to Machinery & Machine Tool listings.

= photo available Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller Video

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search