Browse:  Machinery Electrical
RSS Twitter Facebook Linkedin Instagram Blog Surplus Record
Machinery & Equipment >
Lathes >
Lathes, Engine, Gap, Sliding Bed

LATHES, ENGINE, GAP, Sliding Bed

There are 166 listings in this category
Update: Mon, Oct 26, 2020 16:03:21
Advanced Search
 Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added
 
 
Original Sort

12"/16" x 30" Graziano #SAG, inch/metric, 1-5/8" spdl.bore, 75-2000 RPM, 3 HP, #5507

  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

12"/18" x 40" Jet #1240PD, toolroom engine lathe, 1800 RPM, inch/metric threading, 1.5" thru hole, 6.5" chk, coolant

  Photo Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

13"/18" x 40" Acra #1340V, Sony 2-Axis DROs, 6" 3-Jaw chuck, inch/metric threading, variable speed, 2005

  Photo Visit Dealer's Equipment Listings  RFQ
Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Email: johnm@myerstc.com) John Myers

13"/18" x 40" Ganesh #GT1340, gap bed, 3 HP, 70-2000 RPM, 1-1/2" spindle bore, #5510

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

13"/18" x 40" Jet #GHB-1340A, 1-3/8" spdl bore, 70-2000 RPM, DRO, in/mm, #5088

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

13"/20" x 40" Liberty #TRL-1340, 4-jaw chuck, 1-9/16" hole, #5MT, coolant, chip tray, #A5993

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

13" x 40" WT #TD1340G, gap bed lathe,9 spds, 60-2000 RPM,FL Backsplash,3-jaw chk

  Photo RFQ
Roskelley Machinery Corp., Salt Lake City, UT 801-313-0707 (Email: curt@roskelley.com) Curt Roskelley

14"/20" x 40" Atrump #LD-1440, hardened & ground bed ways, 6"3-Jaw scroll chuck, 3 HP, new, #SMLD1440

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

14"/19" x 40" GMC #GML-1440BGF-1, 6" 3-Jaw chuck, 8" 4-Jaw chuck, 10" face plate, 3.75" S/R, foot brake, cooolant, New

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

14"/22" x 40" Millport Goodway #1440, 3-jaw 8" chk, 4-jaw 6" chk, 1-9/16" hole, #72590

  Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

14"/22" x 40" MSC #1440G, toolroom lathe, 7-1/2" swing over cross slide, 22-1800 RPM, 2-1/16" spindle hole, new 8" 3-Jaw chuck, foot brake, Steady Rest

  Photo Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

14"/21" x 40" South Bend #Turn-nado-EVS-RL93-1440EVS, Newall digital read out, 6-Jaw 8" chk, #5454

  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

14"/18 x 40" Summit #14x40B, 8" chk, 3-jaw, taper attachment, inch/metric, coolant, 2006

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

14"/18" x 60" Summit #14x60B, 12.5" chk, 3-jaw, 2.25" hole, inch/metric, taper attachment, 2006

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

15"/23" x 50" Clausing Colchester #8043, 7.5 HP, #8580HP Acu-Rite DRO, S/R, 2012

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

15"/23" x 50" Clausing #Triumph-15VS, Steady Rest, toolpost, coolant system, splash guard, chuck guard, 7.5 HP, #8993HP

  Photo Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

16"/24" x 40" Acra Turn Namseon #LS-400, 2" hole, 3-jaw, #4MT, coolant, foot brake, #A5991

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

16"/24" x 40" Acra Turn Namseon #LS-400, 2"hole, 3-jaw chuck, #4MT, coolant, foot brake, 5 HP, #A5987

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

16"/21" x 40" Atrump #LD-1640, precision gap bed, hardened & ground bed ways, 6"3-Jaw scroll chk, new, #SMLD1640

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

16"/23" x 40" Baileigh #PL-1640, 8"chuck,3-jaw, Mitutoyo 2-Axis DRO, #6MT, steady & follow rest, #A5607

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

16"/24" x 40" Goodway #GW-1640, 2" hole, 55-1800 RPM, 3-jaw chuck, tool post, coolant system, 7.5 HP, foot brake, #A5996

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

16"/24" x 40" Goodway #GW-1640, 3-jaw, 7.5 HP, tool post, coolant system, foot brake, #A5994 (2 available)

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

16"/26" x 40" Jet #CL-1640ZX, CNC/manual,gap bed lathe,3-jaw 12"chk,3-jaw 10"chk,CNC control,face plate,10 HP,2011,#28370

  Photo Spec Sheet RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

16" x 40" Nardini #MS1640, #3MT, in/mm, S/R & follow, toolpost, 8'chk, 3-jaw, Acu-Rite Turnmate 2-Axis DRO,tlstk,'97,#157718

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

16"/23" x 40" Victor #1640, 3-jaw, 7.5 HP, 2" hole, #4MT, 33-2000 RPM, face plate, foot brake, #A5995

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

16"/22" x 60" Barrett #16x60, engine lathe, in/mm, follow & steady rest, 3-jaw, 5 HP, coolant, #158577

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

16"/22" x 60" Barrett, engine lathe, #4MT, 5 HP, in/mm, 3&4 jaw, follow & steady rest, 1960, #158576

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

16"/25" x 60" Birmingham #YCL-1660, engine lathe, Newall digital read out, taper attachment, 2006

  Photo Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

16"/25" x 60" Summit #16X60B, gap bed,3-Jaw 16" chk,rapid traverse,taper attach,#A4429

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

16"/23" x 60" Victor #1660, 10" swing over cross slide, 65-1800 RPM, #4MT, 4-Jaw chuck, Steady Rest, tool post, 7.5 HP, 8806HP

  Photo Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

17"/24" x 40" Osama Sr #MO-1740G, 3-jaw chuck, foot brake, face plate, coolant system, (2) dead centers

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

17"/26" x 40" Sharp #1740K, gap bed engine lathe, 2.04" spindle bore, 50-1800 RPM, 5 HP, #5520

  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

17"/25" x 40" Webb Whacheon #WL-435, 4-jaw chuck, 2" hole, #4MT, face plate, Steady Rest, #P1003

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

17" x 60" American #17X60 TurnMaster, removable gap, 12" 4-Jaw chuck, 20-1600 RPM, inch/metric

  Photo Spec Sheet RFQ
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

17"/26" x 60" Sharp #1760K, gap bed engine lathe, 2.04" spindle bore, 50-1800 RPM, 7.5 HP, Newall DP-700 digital read out, Steady Rest, #5519

  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

17"/26" x 60" Sharp #1760K, geared head, #4MT, 6" tlstk, 7.5 HP, 2"hole, foot brake, #C5127

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

17"/26" x 60" Sharp #1760K, in/mm thread,taper att.,4-jaw 12"chk,#4 tpr,clnt,'04,#45727

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

17"/26" x 60" Shen Yang #CA6240, gap bed engine lathe, inch/metric, 3-jaw 12" chuck, 4-way rapid traverse, 4-way tool post, chip pan with coolant, foot brake, 10 HP, 2000, #69264

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

17"/28" x 60" Voest, 2"bore,8.5"chk,removable gap,toolholder,steady rest,tlstk,#5372

  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

17"/28" x 80" Clausing #Colchester-17, 10-1/2" swing over cross slide, 3" bar, 3-Jaw 12" chuck, 4-Jaw 16" chuck, inch/metric thread

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

17" x 80" Summit #17-4X80, 27"gap, 3"hole, #5MT, 3/4 jaw chuck, 7.5 HP, in/mm

  Photo Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

17" x 85" Nardini #ND1785, inch/metric threading, 30-2600 RPM, removable gap, well tooled, 1991

  Photo Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Adams Machinery Co, Lake Bluff, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn

18"/27" x 40" Hwacheon #HL-460, digital read out, 3 & 4 jaw, inch/metric, foot brake, 2010, #160295

  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

18"/38" x 44"/72" LeBlond #Regal, gap bed, 8" 3-Jaw Cushman chuck, 690 RPM, 1.5" thru hole

  Photo Spec Sheet RFQ
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

18"/28" x 60" Cosmo #L-1860, heavy duty, Steady Rest & follow, 3-jaw chuck, face plate, KDK tool post, 4-jaw chuck, taper attachment, work light, coolant, #A6285

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

18" x 60" Enco #111-1860, Lathe engine,2.48"spdl.hole,3-Jaw 10"chk,removeable gap,steady rest,1996,#3806

  Photo Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

18" x 60" Mazak, 2-Axis DRO,3.06"bore,1500 RPM,10HP,geared,gap bed,12"chk,tlstk

  Photo PDF icon RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

18"/25.2" x 60" Sharp #1860L, heavy duty, 10 HP, taper, digital read out, 3 & 4 jaw, steady & follow

  Photo Spec Sheet RFQ
Fram Fram LLC, New Hope, MN 612-940-8945 (Email: info@framfram.com) Russ Hilk

18"/24" x 64" Clausing, toolroom lathe, 12" chk, 3-jaw, 3-1/16" hole, Acurite 2-Axis digital read out, 9" Steady Rest

  Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

18"/27" x 78" Kingston #JIMK-460x2000, 16" chuck, 4-jaw, 3-1/8" bore, D1-8 Camlock taper

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

18"/24" x 80" Mazak #18, 10" 3-jaw chuck, inch/metric, taper attach, 7 HP, 1500 RPM, S/N 4119

  Photo RFQ
Morris Rezman Machinery Co, Elk Grove Village, IL 312-829-2510 (Email: rezmanmr@aol.com) Morris Rezman

18"/24" x 80" Mazak #Hercules-18, taper attach.,10"3-jaw,in/mm thread,Aloris,great cond.

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Email: johnm@myerstc.com) John Myers

18"/24" x 100" Mazak, 12" chuck, 3-jaw, 3.125"bore, 7.5 HP, 3-point 8" S/R, taper, follow rest, #11153

  Photo Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

19"/36" x 30"/90" LeBlond, sliding gap bed lathe, #8374

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

19"/30" x 44" LeBlond #Regal, 1.5" thru hole, 425 RPM, 8" 3-Jaw Cushman chuck, 15" 4-Jaw chuck

  Photo Spec Sheet RFQ
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

19"/36" x 54"/90" LeBlond #Regal, gap bed, 8" 3-Jaw chuck, 25-1000 RPM, 1.75" thru hole, Steady Rest

  Photo Spec Sheet RFQ
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

19"/36" x 54" Standard Modern #19/36/54, inch/mm, 1000 RPM, s/n #11454, 1992

  Photo RFQ
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

19"/27" x 80" Summit #1980, engine lathe, 1500 RPM, 3-Jaw chuck, Steady Rest, coolant system, 7.5 HP, #8976HP

  Photo Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

19"/28" x 80" Tuda, 3-1/4" spdl bore,15 HP,215-1800 RPM,in/mm thrd,12"3-Jaw chk,#4458

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

20"/36" x 54" Standard Modern #20/36x54, sliding gap bed,in/mm thread,taper attach.,'83

  Photo RFQ
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

20" x 60" Acra #2060BCY, gap bed, 10"3-Jaw, 12"4-Jaw, S/R, 15-1500 RPM, 10 HP, new, #SM2060BCY

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

20"/26" x 60" Ganesh #GT-2060, 3-1/8" spindle bore, chuck guard, chip pan, follow rest, #A6028

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

20"/28" x 60" GMC #GT-2080, taper attach, Newall 2-Axis digital read out, 4-jaw 15.75" chk, inch/metric, 36-1600 RPM, 10 HP, 2006, #29087

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

20"/28" x 64" H.e.s. #550, 2-1/16" hole, 15 HP, A1-6, 4-jaw chuck, 32-1600 RPM, Steady Rest, rapid traverse, #A6090

  Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

20"/44" x 72"/120" LeBlond #16" Heavy Duty, sliding gap bed lathe, 3-jaw 12"chuck, 4-jaw 15"chuck, 1.75"spinde thru hole, hardways, chip pan, 11-1330 RPM, 15 HP, 1962

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales

20"/27" x 80" Stan Canada Stanko #ZM50, gap bed, 10" chuck, 10 HP, digital read out, 2 Steady Rests, Follow Rest, Tpi 1-80, #5552

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

20" x 120" Nardini #NZ20120, 15" 3-jaw chk, 14" 4-jaw chk, 19-1500 RPM, S/R, tlstk

  Photo Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

20"/26" x 120" Victor #20120, 3-jaw chuck, 3 Steady Rest, 4-jaw chuck, 3" bore, Aloris tool post w/ holders, coolant, 10 HP, foot brake, #A6156

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

21"/28" x 60" Kingston #HL1500, 12.5" chk, 3-jaw, 3.05" bore, 10 HP, Steady Rest & follow

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Tooling Emporium LLC, Louisville, KY 502-419-9170 (Email: john@toolingemporium.com) John Kempf

21"/30" x 60" Summit #21, gap engine lathe, 17.5" chk, 10 HP, 1600 RPM, inch thread, coolant

  Photo Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

21"/32" x 80" Clausing Colcheter #8116VSJ, 4.09" bore, variable speed, Acu-Rite 2-Axis digital read out, 2011

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

21"/28" x 80" Mighty Turn (Mazak copy) #ML-2180GL, gap bed lathe, 4-jaw 15" chuck, digital read out, 11-13/16" swing over cross slide, 9-1600 RPM, 1989, $6,950.00, #4183

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner

21"/30" x 87" Clausing Metosa #C2087SS, toolroom lathe, 12" chk, 3-jaw, 3-1/16" hole, Newall DP700 2-Axis digital read out, 7.5" Steady Rest,

  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

21"/28" x 120" Kingston #HL3000, engine lathe, 12" 4-Jaw chk, 3.125"bore, #11276

  Photo Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

21"/28" x 120" Mascut #MA21120, 3.34" bore, inch/metric, 3-Jaw, Steady Rest, Aloris, 7.5 HP, rapid traverse, 2004, #158451

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

22"/29" x 33" Yam #850HG, 2" hole, Mitutoyo 2-Axis digital read out, coolant, foot brake, 3-jaw chuck, splash guard, chip pan, #A6121

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

22"/31" x 60" Birmingham #YCL-2260, precision gap bed, 16"4-Jaw chuck, 6.5"S/R, 10 HP, new, #SMYCL2260

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

22" x 60" Tarnow gap bed lathe, 4-jaw 16" chuck, coolant system w/splash pans, 9.5" S/R, inch/metric threading, inch dials, Aloris tool post, Trav-a-Dial hardened & ground bed, work light, chuck guard, clutch machine, 1977

  Photo Spec Sheet RFQ
Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Email: johnm@myerstc.com) John Myers

22"/29" x 78" Yang #56200G, 25-1500 RPM, 7.5 HP, 3 & 4-Jaw chuck, inch/metric, steady rest, 1994, #8813JVP

  Photo Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

22"/31" x 80" Sharp, gap bed engine lathe, 3-1/8" spindle bore, 15-1500 RPM, 15 HP, #5518

  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

22"/31" x 90" Kingston #HD-2290, inch/metric, taper, Dorian toolpost, Steady Rest, 2000, #159865

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

22"/30" x 100" Yam #2500HG, gap bed engine lathe,2-3/8" spdl bore,MT4,25-1500 RPM,#5312

  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

22"/31.5" x 118" Polamco / Tarnow, gap type w/taper attachment,inch/metric,16"4-jaw chuck,3.5"hole,20-1600 RPM,14 HP,#28046

  Photo Spec Sheet RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

22"/32" x 120" Mighty Turn #CH22120, 3-jaw 12"chk,Acu-Rite 2-Axis DRO,2005,#70714

  Photo Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

22.5"/36" x 48" Leblond #20NE, gap type lathe, 1.75"spdl hole, 800 RPM, #4MT, #28286

  Photo Spec Sheet RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

23"/32" x 120" Timemaster #S2316, 15.75" chk, 3-jaw, inch/metric, Steady Rest, toolpost, Acu-Rite 2-Axis digital read out, 1980, #159702

  Photo Spec Sheet RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

24"/31" x 60" Ramco National #HG-24Dx60, 4-Jaw 16" chuck, 16.5" swing over cross slide, 1500 RPM, digital read out, inch/metric thread

  Photo Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

24"/54" x 96"/132" LeBlond, sliding gap bed lathe, #13565

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

24"/31.5" x 120" Kingston #HL3000, tailstock, Steady Rest, chuck, 10 HP, 1500 RPM, 1981

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

24"/34" x 120" Pasquino-Milano, gap bed, 3-Jaw chuck, 22-1200 RPM, #5MT, 1960s

  Photo RFQ
Abbott Machine Co, Alton, IL 800-262-6478 (Email: mike@abbottmachineco.com) Mike St.Peters

24"/35" x 160" Mazak #24-160, gap type, removeable gap, 19.5" 4-jaw, (2) steady rests, inch/metric, #6MT, #29068

  Photo Spec Sheet RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

25"/32" x 80" Kingston #HL-2000, gap bed engine lathe, 3" hole thru spindle, A1-8 spindle nose, 25-1500 RPM, inch/metric, 7.5 HP

  Photo Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

25" x 120" Clausing Colchester #25, taper attachment, 4.75"bore

  Photo RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

25"/33" x 120" Summit #24X120B, 12"/18" chk, 3 & 4-jaw, inch/metric, taper, 2 Steady Rest, 2006, #159931

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

25"/34.64" x 120" Tos #SN63C, engine lathe, inch/metric, taper, 4-jaw, 15 HP, 1991, #159044

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

25"/35" x 157" Hercules #SPM-630X4000, 25" chuck, 4.1" bore, 1750 RPM, #12137

  Photo Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

25"/35" x 157" Hercules #SPM-630x4000, gap bed lathe, 1250 RPM, loaded, digital read out, 1997

  Photo Spec Sheet RFQ
Fram Fram LLC, New Hope, MN 612-940-8945 (Email: info@framfram.com) Russ Hilk

26"/44" x 19.6"/39" Poreba #TR-70C, sliding gap bed facing lathe,in/mm,3.1"spdl bore

  Photo Spec Sheet RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

26"/35" x 80" Sharp #2680C, 4-jaw, engine lathe, inch/metric, #5MT, Steady Rest, 2000, #159878

  Photo Spec Sheet RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

26"/34" x 118" Vanguard #CA6266C, gap bed engine lathe, 5MT, 10 HP, 16"width of bed, #5436

  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

26"/35" x 120" Acra #ACH26120, 5" 3-Jaw chk,clnt sys,4-way toolholder,steady rest,DRO

  Photo Visit Dealer's Equipment Listings  RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

26"/31.5" x 120" Longem #LG26120C, engine lathe,7.5-1000 RPM,6MT,15 HP,(2) S/R,1998

  Photo Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

26"/16" x 152" Mitchell, engine lathe,4"spdl.bore,11"steady rest,4-Jaw 24"chk,#016483

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

26"/48" x 152" Mitchell, 16"SOCS, 4-jaw 24" chk, 11" S/R, 4"spdl bore, 15-500 RPM

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

26"/35" x 168" VDF #V5, 1500 RPM,3-Jaw chk,(3) SR,faceplate,camlock spdl nose,#13403

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
N S Machine Corp., Granger, IA 515-999-2999 (Email: sales@nsmachine.com) David Bryan

27"/36" x 240" Geminis #GE-650, 3.25"hole, 3&4 jaw, 17.5 HP, #5MT, S/R, #10901

  Photo Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

27"/36" x 240" Geminis #GE-650, lathe, 3 & 4-Jaw chuck, steady rest, tool post, 17.5 HP, #6429JVHP

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

28"/37" x 120" Tos #SN-71C, inch/metric, 19.5" chk, 4-Jaw, (2) Steady Rest, #5MT, 1990, #159704

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

28" x 204" Ann Yang, twin carriage lathe,3-1/2" spdl. hole,3-Jaw chk,steady rest,1996

  Photo RFQ
S D Cohen Machinery Ltd, Dundas, ON 905-921-2001 (Email: jonathan@cohenmachinery.com) Jonathan Riley

29"/41" x 120" Kingston #HB29, heavy duty engine lathe, 6" spindle hole, 4-Jaw 20"/24" chuck, #6 Morse, 20 HP, (2) Steady Rest, S/N 202906341, 2005

  Photo Visit Dealer's Equipment Listings  RFQ
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels

29"/37" x 167" Victor #29160T, 20" chuck, 4-jaw, 4-1/8" bore, #5MT, steady & follow, 2006

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

29.5" x 118" Broadbent Oil Country Lathe, 49-1/2" Swing in Gap, XY digital read out, inch/metric threading, rebuilt 2017, Tag #16176

  Photo PDF icon RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

30" x 80" Giana #3280, 3" bore, 1280 RPM, (2) 20" chucks

  Photo Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

30"/39" x 120" Sharp #30120V, gap bed engine lathe, 4-1/8" spindle bore, 15-1200 RPM, 15 HP, 19" bed width, D1-11 spindle nose, #5517

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

30"/41" x 120" Summit #30-4X120, gap bed engine lathe, 14-1010 RPM, Steady Rest, Taper, 15 HP, #0506520

  Photo Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

30"/52" x 125" LeBlond #Regal, hvy-duty, 21" 4-Jaw Cushman chuck, 400 RPM, 2.25" thru hole

  Spec Sheet RFQ
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

30" x 160" Summit, gap bed, 39-1/4" swg/gap, 4-1/16" spdl bore, 20-1500 RPM, 15 HP, inch/metric, 26" 4-jaw chuck chip pans,1976

  Photo Visit Dealer's Equipment Listings  RFQ
Abbott Machine Co, Alton, IL 800-262-6478 (Email: mike@abbottmachineco.com) Mike St.Peters

31"/39" x 120" Hoston #C6280Y, removable gap bed,4"thru hole,in/mm threading,3-Jaw chk

  Photo RFQ
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

32" x 80" Poreba #TPK80/2, heavy duty,4-jaw 24"chuck,3-3/4"spdl.hole,steady rest,nice

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Roberts Machinery Sales, Ferndale, MI 248-543-4466 (Email: rmsused@aol.com) Kimball R Roberts

32"/60" x 90" LeBlond, 15" 3-Jaw chuck, 8-400 RPM, 2.25" thru hole, taper attach, threading

  Photo Spec Sheet RFQ
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

32" x 96" Ajax, 4"hole, 4-jaw, #6MT, 25 HP, gap bed engine lathe, #10911

  Photo Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

32"/42" x 96" Ajax #C13B, 8-1000 rpm, 4" spindle hole, 6MT, 4-jaw chuck, 4-way toolpost, #6268JVP

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

32" x 105" Mazak #30-100, engine lathe, 24"chk, 4-jaw, in/mm, 4-post, taper attach

  Photo Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

32" x 105" Mazak #30-100, engine lathe, 24"chk, 4-jaw, in/mm, 4-post, taper attach

  Photo Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

32"/41" x 120" Birmingham #YCL-32120, 3 & 4-Jaw chucks, 4-way tool post, #5MT, S/R, 10 HP, new, #SMYCL32120

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

32"/40" x 120" DMTG #CW6210, 16"chk3-jaw,25"chk,4-jaw, rapid traverse, 2008, #11878

  Photo Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

32"/39" x 120" GMC #GT-32120, 16" 3-Jaw chuck, 20" 4-Jaw chuck, 25" face plate, removable gap, foot brake, New

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

32"/44" x 120" Lehigh #32120B, 25"chk,4-jaw,5-1/8"bore, 16" 3-point S/R, hvy duty, Newall C80 2-Axis DRO, 2001, #11073

  Photo Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

32"/55" x 120" National #LSP32120, engine lathe, 24"chk,4-jaw,6.25"bore, in/mm, 1982

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

32"/42" x 120" Poreba #TPK-80/3M, heavy duty, 4-Jaw 32" chk, Steady Rest, Follow Rest, 1984, #8964HP

  Photo Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

32"/43" x 120" Summit #30-4-120, Engine Lathe, 23-1/2" swing over cross slide, 4-1/8" thru hole, #5MT, 14-1010 RPM, 15 HP, coolant, taper attachment

  Photo Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

32"/43" x 120" Summit #30-4120, 23-1/2" swing over cross slide, 14-1010 RPM, 5MT, inch/metric threading, 3 & 4 Jaw chuck, taper attachment

  Photo Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

32" x 120" Timemaster /Gurutzpe #Super-RT3000/400, F & R 10"hole chk, 500 RPM,'82

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

32"/48" x 156" Meuser #M4L, 27"chk,4-jaw, 1000 RPM, tailstock, taper attach., #11841

  Photo Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

32"/45" x 160" Timemaster #S3222, gap bed, taper attach, inch/metric, 25"face plate, 5"hole, #6MT, 11-800 RPM, 25 HP, #28023

  Photo Spec Sheet RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

32"/60" x 162" LeBlond, 4-way tool post, 57.5" face plate, 5-500 RPM, 40 HP, 10" & 22" S/R

  Spec Sheet RFQ
Dominion Air & Machinery Co, Roanoke, VA 540-344-8733 (Email: stevenson@dominionair.com) R. Stevenson

32" x 197" Poreba #TPK-80/5M, DRO,3.7"bore,35HP,800RPM,16"chuck,(2) S/R,F/R,'83

  Photo PDF icon RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

32"/45" x 204" Meuser #MIV-S, 19.5" chuck, 3 & 4-jaw, 3-5/8" bore, #6MT, inch/metric, Steady Rest, 1970, #158805

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

32"/40" x 222" Heyligenstaedt, 31.5" chuck, 4-jaw, 3.125" hole, 16" Steady Rest, tailstock, #18030J

  Photo Visit Dealer's Equipment Listings  RFQ
Arlington Machinery, Elk Grove Village, IL 773-692-0733 (Email: sales@arlingtonmachinery.com) Sales

33" x 118" DoAll Romi #E45B, 48" bed extension, 750 RPM, 20 HP, tailstock, 2-Axis digital read out, #5544

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

33"/38" x 157" Lion #CU-832, 6" bore, 20 HP, D1-15, 4-way rapid traverse, 2012, #A6282

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

34" x 160" Mazak, engine lathe, 44.5"gap, 28"chk,4-jaw, 20" S/R, #6MT, Trav-A-Dial, 1979

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

34"/100" Axelson, sliding gap bed lathe

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales

35"/52" x 100" Eisen #PA35, heavy duty hollow spindle, GF 800 DRO, 25" chk., 3 & 4-jaw, slide guard, 2012 (3 available)

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

35"/52" x 100" Eisen #PA35, heavy duty hollow spindle, GF 800 digital read out, 25" chuck, 3 & 4-jaw, sliding guard, 2012, #A5212

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

35"/52" x 100" Eisen #PA35, GF 800 DRO, 25"chuck, 3 & 4-jaw, sliding guard,'12,#A5213

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

36"/42" x 84"/132" LeBlond #32"NK, sliding gap bed engine lathe,4-jaw 36"chuck,1954

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales

36"/46" x 84" Lion #C13B, engine lathe, 1000 RPM, inch/metric threading, 19" 4-Jaw chuck, Steady Rest

  Photo Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

36"/66" x 120"/160" Tacchi #TA4-1, sliding bed,6"bore,700 RPM SR,chk,s/n #95479

  RFQ
Mobius Group LLC, Rock Falls, IL 815-285-2660 (Email: hotmetal@centurytel.net) David H Doctor

36" x 128" Poreba #TRP-93VSX3M, geared head, 27.2" over cross slide, taper attachment, digital read out, 30" 4-Jaw chuck, 2004

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

36" x 156" American, 0-650 RPM, with tooling

  RFQ
American Steel Products Co, Toledo, OH 419-843-6051 (Email: ford@americansteel.com) Ford Cauffiel

36"/42" x 160" Poreba, engine lathe, 32" 4-Jaw chuck, 4" thru hole, inch/metric threading, 2-Axis Acu-Rite digital read out, 1500 RPM, #1703320

  Photo Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

36"/46" x 160" Poreba #TPK90A1/4M, gap bed engine lathe, 31" 4-Jaw chuck, inch/metric thread, 1987

  Photo Visit Dealer's Equipment Listings  RFQ
Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Email: sales@meridianmachinery.com) Steve Daigle

37"/52" x 120" Lansing #G37-13-5/8, oil field big hole lathe, double chucking machine, 4-jaw chuck, 13-5/8" hole, rapid traverse, inch/metric threading, #A6228

  Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

37"/50" x 210" Meuser, 4"bore, inch/metric, 36"chuck

  Photo Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

40"/65" x 72"/132" LeBlond #NK-4025/65, 60 HP, 3-jaw 24"chuck, 3"bore, 1969

  Photo Spec Sheet RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

40"/56" x 80" Timemaster Gurutzpe #Super-AT, 44" chuck, 4-jaw, 5.5" bore, 13" Steady Rest, #6MT, D1-11, rapid traverse, in/mm, tlstk, 1982

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Email: sales@gaec.com) Sales Dept.

40"/132" x 108"/168" LeBlond #4025/66-108", Servo Shift headstock

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Email: leads@wigglesworth.com) T. Wigglesworth

40"/51" x 120" Geminis #GE-1000-A, 35.5" chuck, 4-jaw, Steady Rest, Anilam 2-Axis digital read out, 40 HP, inch/metric, 1984, #159943

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

40"/48" x 160" Birmingham #DL40160, inch/metric, 5" hole, 4-jaw, taper, Newall 2-Axis digital readout, steady & follow, 2007, #160121

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

46" x 120" LeBlond #2013, heavy duty sliding gap bed lathe, #13590

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

53"/62" x 276" Poreba #TR135B3/7M, gap bed engine lathe, 11" 4-Jaw chuck, inch/metric thread, 1999

  Photo Visit Dealer's Equipment Listings  RFQ
Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Email: sales@meridianmachinery.com) Steve Daigle

59"/78" x 354" Annn Yang #DY-150X9000G, gap, 50"T-slotted revers. chk, 2004, #A3649

  Photo Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

84" x 80" -140" FW Giano sliding bed gap lathe, Newell digital read out, threading, 4-Jaw 50" chuck, rapids, 4 way tool post

  Photo Video icon RFQ
FMT Co, Hubbard, TX 817-714-9839 (Email: fmtco.mike@yahoo.com) Mike Frost

98.6" Zerbst #DP3-139", component style,139"swg in gap,47.2"trvl,in/mm,'91,JV-20565TK

  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury

Tos Trencin #SN50C, Heidenhain DRO, tool post, chuck, #48170

  Photo Spec Sheet Visit Dealer's Equipment Listings  RFQ
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

Back to Machinery & Machine Tool listings.

Photo = photo available    Spec Sheet icon = spec sheet available    PDF icon = PDF available    RFQ icon = request quote from seller    Video = video available    web site icon = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search
Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise