Browse: Machinery Electrical

Machinery & Equipment >

Ironworkers >

Ironworkers

IRONWORKERS

There are 177 listings in this category
Update: Fri, Dec 6, 2019 16:03:20

Advanced Search

Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added

Original Sort

2" x 2" x 5/8" Voortman #V550-4, flat & angle punching shearing machine, 2005, #13714b

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

3" x 3" x 1/4" Dvorak Scotchman #314, ironworker, 35 ton, 3 HP, # 5415

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

3" x 3" x 1/4" Edwards, 40 ton, punch, angle & flat bar shear 3/8" x 10", 5 HP, brand new

Nevins Machinery Concepts Inc, South Easton, MA 508-894-0008 (Email: sales@nevinsmachinery.com) Jim Nevins

3" x 3" x 1/4" Ironcrafter #30/30, hydraulic, 2" stroke, 30 ton, s/n #790171, 1990, #156526

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

3" x 3" x 1/4" Scotchman #314, hyd ironworker, 35 ton, 4" thrt, 2 HP, 14" shear length, #64293

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

3" x 3" x 5/16" Geka #Microcrop-36, 40 Ton, 6-6/8" throat, 1.5" stroke, 4.5 HP, foot pedal, New, #SMMICROCROP36

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

3" x 3" x 5/16" Geka #Microcrop-36, 40 Ton, 13" x 1/4" Shear, #4724

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

3" x 3" x 5/16" Iron Crafter #41-41, hydraulic ironworker, 40 ton, punch/shear, 1980

Michael Fine Machinery Co., Livingston, NJ 973-992-5961 (Email: Mcfmach@aol.com) Michael/ Dave

3" x 3" x 5/16" Mubea HPS-350E, Ironworker, 6x1/2, 38 Ton, #4566

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

3" x 3" x 5/16" Scotchman #4014, hydraulic, 40 ton, punching, shear, angle shear, 3 HP

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Email: info@strandindustrialauctions.com) Dan Strand

3" x 3" x 5/16" Scotchman #Porta Fab 45, hydraulic ironworker, 45 ton, 4-1/2" throat, 3 in 1 combo tool, warranty, new, #SMPORTAFAB45

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

3" x 3" x 3/8" Edwards, 50 ton 1-7/8 str., 7" thrt, 8-1/8" open height, 6-1/4" SH, coper, new

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

3" x 3" x 3/8" Piranha #P-50, hydraulic ironworker, 50 ton, 5" throat, 3 HP, new

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

3" x 3" x 3/8" Piranha #P-50, 50 ton, mechanical hold down, punch holder, set of angle knives, 5" throat, 3 HP, new, #SMP50

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

3" x 3" x 3/8" Piranha #P-50, 50 ton, shear 13" x 1/4" & 6" x 3/4", 5" throat, notcher, 3 HP, bending option available

A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff

3" x 3" x 3/8" Scotchman #DO-135/220-24M, ironworker, 135 ton, dual operation, 12" throat, made in the USA, new, #SMDO13522024M

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

3" x 3" x 3/8" Uni-Hydro #42-14, hyd ironworker, 45 ton, 6" throat, #5483

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

3" x 3" x 3/8" Uni-Hydro #45-14, hyd ironworker, 45 ton, 6" thr, 14" bar shear, 1000 psi

Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

3" x 3" x 3/8" Uni-Hydro #Pro-56, hyd ironworker, 56 ton, slug type angle shear, #1487

Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

3-1/2" x 3-1/2" x 3/8" Mubea #KBL-OF, ironworker, 38 ton, 2 HP

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

4" x 3" x 7/16" Geka #11-H, mech ironworker, 11 ton, 5" channel

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

4" x 3" x 7/16" Geka #COP/11-H, mechanical ironworker, 11 ton, 2.2 KW, #69208

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

4" x 4" x 1/4" Edwards #IW55-1P230 JAWS IV, ironworker, 55 Ton, 7.5" throat, 5 HP, new

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

4" x 4" x 1/4" Edwards #Jaws-IV, 50 ton, 7" throat, 1/2" x 10" flat shear, 1-1/8" bar shear, 3HP

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

4" x 4" x 1/4" Edwards #Jaws-IV, 50 ton, 7" thrt, 8-1/8" open, 7" SH, flat bar/angle shear

Nevins Machinery Concepts Inc, South Easton, MA 508-894-0008 (Email: sales@nevinsmachinery.com) Jim Nevins

4" x 4" x 1/4" Edwards, ironworker, 55 ton, 1-1/4" stroke, 7-1/2" throat, 6-7/8" SH, new

Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

4" x 4" x 1/4" Hill Acme Metalworker #3, 33 ton, punch, bar round plate tes shear, coper/notcher, 1" stroke, 5 HP, #28779

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

4" x 4" x 1/4" HMI #4214-20, ironworker, 42 ton, 14" throat, #13650

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

4" x 4" x 1/4" Peddinghaus Peddiworker #550, Hydraulic Ironworker, 55 Ton, 2004, #8264HP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

4" x 4" x 3/8" Durma #IW55-BTD, dual cylinder ironworker w/NC punch gauge, 60 ton, 2011

Revolution Machine Tools Inc, North Salt Lake, UT 385-321-3934 (Email: kyle@rmtus.com) Kyle Jorgenson

4" x 4" x 3/8" Metal Muncher #MM61E18, hydraulic, 49 ton, 13" /16" thru 3/4" punch, 3 HP, 1980, #10474

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

4" x 4" x 3/8" Metal Muncher #MM61E18, hydraulic ironworker, 49 ton, 1979, #70550

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

4" x 4" x 3/8" Peddinghaus #44-66H, 44 ton, 15" shear, dual cyl., blades sharp

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

4" x 4" x 3/8" Scotchman #5014-ET, 50 ton, 3-station revolving turret, 2" die holders, new, #SM5014ET

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

4" x 4" x 3/8" Scotchman #5014-TM, hyd ironworker, 50 Ton, 5" throat, 3 HP, 3 Position Turret Punching System

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

4" x 4" x 3/8" Scotchman #50514-CM, hydraulic, 50 ton, punch, bar shear, notcher, new, #24581

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

4" x 4" x 3/8" Scotchman #MO5014-TM, hydraulic ironworker, 50 ton, 4" throat, 3 HP

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

4" x 4" x 1/2" Buffalo #1/2, mechanical ironworker, 50 ton, 1-1/8" stroke, 10" shear blade length, #28388

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

4" x 4" x 1/2" Geka #Bendicorp-85SD, ironworker, 93 ton, 20" throat, hyd hold down, 2015

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Email: info@stevensmachinery.com) Randy/Jeff/Chris

4" x 4" x 1/2" Geka #Hydracrop-55/S, hydraulic, 50 Ton, dual operator controls, 6.5 HP, 1999, #8430P

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

4" x 4" x 1/2" Hill-Acme #4, hydraulic ironworker, #8305

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

4" x 4" x 1/2" Hill Acme #4-metalworker, hyd ironworker, 60 ton, 7.5 HP, 60 SPM, #71855

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

4" x 4" x 1/2" Hill-Acme #4A, 58 ton, punches, dies, 12" shear, 2-3/4" x 2-3/4" x 3/8" coper, #9754

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

4" x 4" x 1/2" Hill Acme, 60 ton, 8" shear, dual operater, 1979

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

4" x 4" x 1/2" Scotchman #9075-24, hyd ironworker, 90 ton, 24" shear, angle shear, #13447

N S Machine Corp., Granger, IA 515-999-2999 (Email: sales@nsmachine.com) David Bryan

4" x 4" x 1/2" Webb #4, 50 ton, 1" hold punch capacity, 1/2" shear capacity, 3/8" coper, s/n 55S34

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

4-1/2" x 4-1/2" x 3/8" Geka Hydracrop #55/A, ironworker, 60 ton, foot pedal, 1998, #10342

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

4-1/2" x 4-1/2" x 3/8" Geka Hydracrop #55/A, hyd ironworker, 60 ton, 6.5 HP, 2003, #28111

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

4.5" x 4.5" x 3/8" Geka Hydracrop #55A, hydraulic ironworker, 60 ton, 10" throat, notcher, 12' x5/8" flat shear, 6.5 HP, #27910

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

4-1/2" x 4-1/2" x 3/8" Geka Hydracrop #55A, 60 ton, hydraulic ironworker, foot pedal, 1998

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

4-1/2" x 4-1/2" x 3/8" Geka #H-50, ironworker, 55 ton, shear, bar cutter, notcher, 10" throat, 25 SPM, #27824

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

5" x 5" x 3/8" Geka #Bendicrop-60s, 60 ton, 10" throat, 3/4" stroke, 7.5 HP, New

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

5" x 5" x 3/8" Geka #Bendicrop-85S, 90 ton, 12" throat, 1" stroke, 13.5 HP, 5 stations, New

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

5" x 5" x 3/8" Ironcrafter #HMW70-70, ironworker, 70 ton, 15" thrt, hand lever control, #10270

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

5" x 5" x 3/8" Kingsland Shark #50, ironworker, 14" x 5/8" plate, new in stock, tag #14626

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

5" x 5" x 3/8" Mako #T-55, hyd universal ironworker, 55 ton, 10 HP, manual BG, new, #2547

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

5" x 5" x 3/8" Peddinghaus #PeddiWorker-1100G, 100 ton, hydraulic ironworker, 10" thr, #11811

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

5" x 5" x 3/8" Piranha #P3, 50 ton, 4.25" stroke, 8" throat, 13.5" open hght, #158670

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

5" x 5" x 3/8" Piranha #P3, ironworker, 50 ton, #13426

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

5" x 5" x 3/8" Piranha #P50, ironworker, 50 ton, 8" throat, 13-1/2" OH, 10" x 17" table, #13556

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

5" x 5" x 3/8" Piranha #P65, hydraulic, 65 ton, automatic hold down, punch holder, 7.5 HP, new, #SMP65

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

5" x 5" x 3/8" Piranha #P65, ironworker, 65 ton, 8" throat, 4-1/4" stroke, 7.5 HP, new

Worldwide Machine Tool, Lewis Center, OH 614-496-9414 (Email: bill@worldwidemachinetool.com) Bill Garbe

5" x 5" x 3/8" Piranha #P65, hydraulic ironworker, 65 ton, 8" throat, 7.5 HP, new

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

5" x 5" x 3/8" Piranha #P65, ironworker, 65 ton, 8" throat, 4-1/4" stroke, 9-1/4" closed ht, 10" x 17" platen table, #071873

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

5" x 5" x 3/8" Piranha #PII-88, dual operator ironworker w/auto hold down, 88 ton, new

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

5" x 5" x 3/8" U.S. Industrial, ironwork, hydraulic, 66 ton, inexpensive, new

Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams

5" x 5" x 1/2" Buffalo #1-1/2C, ironworker, 65 ton, 22-1/2" throat, 3 HP, tooling, 1987, #72338

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

5" x 5" x 1/2" Buffalo #1-1/2UIW, ironworker, 65 ton, 20" throat, 44 SPM, 5 HP, #67856

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

5" x 5" x 1/2" Edwards, 60 ton, 1-1/4 str., 8-7/8 throat, coper, notcher, 5 HP, new

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

5" x 5" x 1/2" Geka #70S, hydraulic ironworker, 70 ton, 5 HP, 48 SPM, 1986, #65335

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

5" x 5" x 1/2" Geka #HYD-70, hydraulic ironworker, 70 ton, 12" throat, 5 HP, 48 SPM, #70373

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

5" x 5" x 1/2" Geka #Hydracrop-Hyd-70, ironworker, 70 ton, 20" throat, 3" stroke, 48 SPM, 12 HP motor, notcher, #18311

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

5" x 5" x 1/2" Hill-Acme #4A, 70 ton universal hydraulic ironworker, 1986, #102704

R A B Industries Inc, Washington, MI 586-752-0090 (Email: rabind@comcast.net) Rod A Blasius

5" x 5" x 1/2" Hill-Acme #5, hydraulic ironworker, 75 ton, 20" throat, 10 HP, #7994HP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5" x 5" x 1/2" Hill-Acme #5, 75 ton, hyd ironworker, 12" blade, 20" thr, dual ft control

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

5" x 5" x 1/2" Hill-Acme #5, 75 ton, metalworker, shear, punch, coping, #64285

TDI Group LLC, Pittsburgh, PA 412-826-4950 (Email: sales@tdigrp.com) D. DiBenedetto

5" x 5" x 1/2" Hill Acme #5, angle shearing, coper, notcher, dual station, foot pedal

Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

5" x 5" x 1/2 " Marvel Spartan #IW66DX, 66 ton, 20" thrt, dual controls, flat, angle, punch, '08

Thoroughbred Machinery Inc, Houston, TX 713-822-5858 (Email: glaconis@me.com) Gary Laconis

5" x 5" x 1/2" Peddinghaus Peddiworker #1, Hydraulic Ironworker, 100 Ton, #8262HP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5" x 5" x 1/2" Peddinghaus #210-Super-13, irownworker, 66 ton, 14" throat, 1981, #66794

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

5" x 5" x 1/2" Peddinghaus #210A/16, ironworker, 71 ton, punch, solid bar cut, #10284

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

5" x 5" x 1/2" Peddinghaus #88/120, 88 ton, 20" shear with hydraulic holddown, 1993

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

5" x 5" x 1/2" Peddinghaus #Peddimaster-88/120H, hydraulic ironworker, 80 ton

Federal Equipment Div, Ronkonkoma, NY 631-467-9400 (Email: sales@federalequip.com) Ron Shuster

5" x 5" x 1/2" Piranha #P-70, hyd ironworker, 70 ton, 4-7/8" str, 10" thrt, 10" SH, #8394HP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5" x 5" x 1/2" Piranha #P-90, hyd ironworker, 90 ton, 10" throat, 10 HP, auto hold down, new

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

5" x 5" x 1/2" Piranha #P-90, 90 ton, 5.25" str, 10" thr, 18" x 1/2" plate, 15 HP, 1996, #11048

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

5" x 5" x 1/2" Spartan Marvel #IW66D, hyd ironworker, 66 ton, punch holder, jog mode

Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

5.125" x 5.125" x 1/2" Baileigh #SW-95, 95 ton, 3.93" str, 16" thrt, 16.125" blade length, 5 station, dual operator, 2016, #A5936

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

5-1/8" x 5-1/8" x 1/2" Geka #Hydracrop-80SD, 88 ton, hydraulic, 5 stations, foot pedals, New

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

6" x 6" x 3/8" Mubea #KBL1100, mechanical ironworker, 110 ton, 20" throat, #68075

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

6" x 6" x 3/8" Scotchman #6509-24M, hydraulic ironworker, 65 ton, 5 HP, 2005, #28139

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

6" x 6" x 3/8" Scotchman #6509-24M, 65 ton, 3/4" str, hydraulic ironworker, #SM650924M

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

6" x 6" x 3/8" Scotchman #6509-24M, hydraulic ironworker, 65 ton, 3/4" stroke, 9" throat, 5 HP, #A5856

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

6" x 6" x 3/8" Scotchman #6509-24M, hydraulic ironworker, 65 ton, 9" throat, angle shear, warranty, new, #SM650924M

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

6" x 6" x 3/8" Scotchman #6509-24M, hydraulic, punch, bar shear, 65 ton punch station, new, #21069

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

6" x 6" x 3/8" Unihydro #66-24, 66 ton, 9" thr, hyd ironworker, foot pedal, #158594

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

6" x 6" x 1/2" Buffalo #2-1/2, 111 ton, shear, punch, coper, notcher

Adams Machinery Co, Lake Bluff, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn

6" x 6" x 1/2" Buffalo #675H, hydraulic ironworker, 75 ton, 7-1/2 HP, 1988, #57965

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

6" x 6" x 1/2" Edwards #Jaws-IV, 100 ton hydraulic ironworker, USA, 1998

Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

6" x 6" x 1/2" Edwards 120 ton hydraulic ironworker, 10 HP, 2" stroke, 11" throat, 2016

Holland Machinery Company Inc, Miami, FL 305-635-2325 (Email: sales@hollandmachinery.net) Sales

6" x 6" x 1/2" Geka #100S, hydraulic ironworker, 100 ton, 12 throat, 7.5 HP, #70028

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

6" x 6" x 1/2" Geka #110 Semi Paxi, 120 ton, hyd ironworker, 24" throat, 2" bar shear, 3 HP, 16" x 40" prog. travel, '03

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

6" x 6" x 1/2" Geka #110/S, ironworker, 110 ton, 12" throat, 3" stroke, 7.5 HP, #71885

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

6" x 6" x 1/2" Geka #110SD Semi Paxy, ironworker, 120 ton, PC based, 2003

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

6" x 6" x 1/2" Geka #110SD, w/Semi PAXY, hydraulic ironworker, 120 ton, 2008

Federal Equipment Div, Ronkonkoma, NY 631-467-9400 (Email: sales@federalequip.com) Ron Shuster

6" x 6" x 1/2" Geka #110SD, 120 ton punch w/Simi Paxy CNC gauge, 24" thrt, 24" plate, '12

Centra Corporation, Perry Hall, MD 410-945-0040 (Email: ed@centracorp.com) Ed/Mike/Thomas

6" x 6" x 1/2" Geka #HYD-100, hydraulic ironworker, 110 ton, notcher, bar cutter, angle shear, 10 HP, #28026

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

6" x 6" x 1/2" Geka #Hydracrop-110, hydraulic ironworker, 120 ton, 12" throat, 2" max bar shear, 24" x 5/8" plate shear, 3 HP

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

6" x 6" x 1/2" Peddinghaus #210A/20, ironworker, section cutter - shear - punch - notching attachment, 94 ton, 10 HP, #28361

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

6" x 6" x 1/2" Scotchman #9012, 90 ton, 24" shear, 5 HP, angle shear attach, punches & dies

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

6" x 6" x 1/2" Scotchman #9075-24, hydraulic ironworker, 90 ton, 37 SPM, 7-1/2 HP, #66622

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

6" x 6" x 1/2" Scotchman #912-24M, ironworker, 90 ton, angle shear, punch station, 3 yr manufacturers warranty, new, #SM901224M

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

6" x 6" x 1/2" Scotchman #DO-70/110-24M, dual operator ironworker, 70 ton, 9" throat, made in the USA, new, #SMDO7011024M

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

6" x 6" x 1/2" Scotchman #DO-95/140-24M, dual operator ironworker, 95 ton, 9" throat, made in the USA, new, #SMDO9514024M

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

6" x 6" x 1/2" Scotchman #DO-120/200-24M, dual operation hydraulic ironworker, 120 ton, 12" throat, USA, new, #SMDO12020024M

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

6" x 6" x 1/2" Scotchman #DO-150/240-24M, dual operation hydraulic ironworker, 150 ton, 12" throat, new, #SMDO15024024M

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

6" x 6" x 1/2" Scotchman #DO-8514-20M, 85 ton, dual op., 20" shear, 14" throat, 2007

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

6" x 6" x 1/2" Scotchman #DO-8514-20M, dual operation hydraulic ironworker, 85 ton, 14" throat, warranty, new, #SMDO851420M

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

6" x 6" x 1/2" Scotchman #FI-85/140 FI-8507-14M, 85 ton, 14" shear, 3x5 notcher, rod shear

Century Machinery Co, Los Angeles, CA 213-627-2847 (Email: sales@centurymachinery.com) Leon Dietch

6" x 6" x 1/2" Scotchman #FI-8510-20M, 85 ton ironworker, adjustable electric stroke control w/scale, warranty, new, #SMFI851020M

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

6" x 6" x 5/8" Mubea #HIW1000/610, 110 ton, heavy duty, punches & dies, back stop, elec foot pedals, 24" plate shar, 2008, #A5805

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

6" x 6" x 5/8" Mubea #KBL110-7-Optima, ironworker, 110 ton, 20" throat, foot pedal controls, 5-work stations, 10 HP, #18068

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

= photo available Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller Video

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search