Used ELECTRICAL DISCHARGE MACHINES (EDM), WIRE, CNC For Sale

Hitech Machinery Sales Inc, St. Charles, IL 630-443-7865 (Email: sales@hitechmachinery.com) Bill Raye

EDM Network Inc, Sugar Grove, IL 630-466-5588 (Email: ron@edmnetwork.com) Ron Vogel

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Girard Machinery Sales, Innisfil, ON 647-477-9433 (Email: sales@girardmachinerysales.com) Guy Girard

Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-389-6449 (Email: amanda@1800lastbid.com) Amanda Bowers

Hitech Machinery Sales Inc, St. Charles, IL 630-443-7865 (Email: sales@hitechmachinery.com) Bill Raye

ACT Inc, Fullerton, CA 714-441-1992 (Email: rsg@actmachinery.com) Randy Goodman

The Velocity Group LLC, Madison Heights, MI 916-436-5443 (Email: sales@thevelocitygrp.com) Jonathan Turner

R & J Machinery Sales, Milford, MI 248-685-7879 (Email: sales@rjmachinerysales.com) Jeff Bruce

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Hitech Machinery Sales Inc, St. Charles, IL 630-443-7865 (Email: sales@hitechmachinery.com) Bill Raye

EDM Network Inc, Sugar Grove, IL 630-466-5588 (Email: ron@edmnetwork.com) Ron Vogel

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Arlington Machinery, Elk Grove Village, IL 773-692-0733 (Email: sales@arlingtonmachinery.com) Sales

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

EDM Systems LLC, Catawba, NC 828-241-1701 (Email: sales@edmsystems.com) Tim Harwood

Hitech Machinery Sales Inc, St. Charles, IL 630-443-7865 (Email: sales@hitechmachinery.com) Bill Raye

EDM Systems LLC, Catawba, NC 828-241-1701 (Email: sales@edmsystems.com) Tim Harwood

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

EDM Network Inc, Sugar Grove, IL 630-466-5588 (Email: ron@edmnetwork.com) Ron Vogel

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

EDM Network Inc, Sugar Grove, IL 630-466-5588 (Email: ron@edmnetwork.com) Ron Vogel

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

Hitech Machinery Sales Inc, St. Charles, IL 630-443-7865 (Email: sales@hitechmachinery.com) Bill Raye

Machinery Source LLC, Belvidere, IL 815-547-0990 (Email: used@machinerysource.com) Used Sales Dept.

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Email: sales@gaec.com) Sales Dept.

Machinery Works Inc, Saukville, WI 262-284-5611 (Email: bob@machwksinc.com) Bob Wescott

Webimat Inc, Mishawaka, IN 574-220-2050 (Email: webimatllc@att.net) Tom Kostielney

Machinery Source LLC, Belvidere, IL 815-547-0990 (Email: used@machinerysource.com) Used Sales Dept.

Machinery Works Inc, Saukville, WI 262-284-5611 (Email: bob@machwksinc.com) Bob Wescott

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

EZ Systems, Costa Mesa, CA 714-815-4968 (Email: davidk@ezsystems.com) David Kranser

Peterson Machinery Sales, Casa Grande, AZ 231-944-4927 (Email: machine@petersonmachinery.com) Andrew Peterson

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

Hitech Machinery Sales Inc, St. Charles, IL 630-443-7865 (Email: sales@hitechmachinery.com) Bill Raye

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Hitech Machinery Sales Inc, St. Charles, IL 630-443-7865 (Email: sales@hitechmachinery.com) Bill Raye

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Email: sales@clevelandmachinery.com) F. Petitt

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

EDM Network Inc, Sugar Grove, IL 630-466-5588 (Email: ron@edmnetwork.com) Ron Vogel

EDM Systems LLC, Catawba, NC 828-241-1701 (Email: sales@edmsystems.com) Tim Harwood

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

EDM Systems LLC, Catawba, NC 828-241-1701 (Email: sales@edmsystems.com) Tim Harwood

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

EDM Systems LLC, Catawba, NC 828-241-1701 (Email: sales@edmsystems.com) Tim Harwood

Hitech Machinery Sales Inc, St. Charles, IL 630-443-7865 (Email: sales@hitechmachinery.com) Bill Raye

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Tartan American Machinery Corp, Macomb Township, MI 586-786-9585 (Email: tartan@comcast.net) Harry Richardson

Adams Machinery Co, Lake Bluff, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn

= photo available Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller Video

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search

ELECTRICAL DISCHARGE MACHINES (EDM), WIRE, CNC

Accutex #AU-500i, 19.7x11.8x10.4" trvls, submersible, AWT, glass scales, chiller, +/- 23 taper, transformer, 2006, #0723

Accutex #SP-9i, 36 x 20 x 12"travels,flusher,AWT,glass scales,+/- 22 taper,chiller,large spool,MDI,RS232C,LAN,USB,2010

Agie #Agiecut-100, Wire EDM, auto wire threading, clamping system, Agiematic C Ctrl, under power, 1987, #5712

Agie #Agiecut-250HSS, Wire EDM,15.7"X,9.8"Y,9.8"Z,submerged cap,auto thrdg,1997

Agie #Agiecut-AC-Classic-2, X-350mm,Y-250mm,Z-256mm,0.2-.33mm dia.,chiller,#80211

Agie #Agiecut-Classic-2S, wire Electrical Discharge Machine, 13.77" X, 9.84" Y, 9.84" Z, 1195.2 hours, 2003, #12566

Agie #Agiecut-Classic-3, under power, 1997, #6887

Agie #Agiecut-Classic-3, with EXT Z-Axis, 19.7"X, 13.77"Y, 16.82"Z, 2004

Agie Charmilles #Cut-300SP, CNC wire Electrical Discharge Machine, 5-Axis, automatic threading, 21.7" X, 13.8" Y, 15.7" Z, 35.4" x 23.6" table, TGFT CNC, 2013

Agie #Legend-315/3, 6"X,12"Y,4.66"Z,Fastrack 2.0,generator MS/3,refurbished,1983,#0691

Agietron #250HSS, 15.75x9.84x9.84" trvls, Agiematic CF SE Control, submerged, Agiepulse HSS Gen, Waterjet AWT, 1998, #0718

Agietron Challenge #2F, wire Electrical Discharge Machine, 10" X, 14" Y, 10" Z, AgieVision 3, programmable drop tank, 2002

Agietron Charmilles #Cut-20, wire Electrical Discharge Machine, 13.78" X, 9.84" Y, 9.84" Z, submerged cutting, 2008

Agietron Charmilles #Cut-30P, 24" X, 16" Y, 14" Z, chiller unit, automatic threading, CNC, 2016

Agietron Charmilles #Cut-2000, 13.78" X, 9.843" Y, 10.079" Z, dual wire unit, 2011

AMS Tech #AW3SL, wire EDM AC Servo motor/Linear motor, 2011

Belmont Astec #CDH-3A, hole driller,50 amps,19.7"x14.8"tbl,s/n H3A-003270,'98,#155950

Belmont #Maxicut-S-26, Electrical Discharge Machine hole driller, hole popper, #158966

Bridgeport #McWilliams-1014, Electrical Discharge Machine, Serial No 651, CNC Controls

Charmilles #Robofil-240, wire Electrical Discharge Machine, 13.77" X, 8.66" Y, 8.66" Z, Dielectric filtration, 2003

Charmilles #Robofil-290, 16 x 10 x 8"travels, glass scales, AWT, MDI, RS232, floppy, +/- 30 taper, 1998

Charmilles #Robofil-290F, wire Electrical Discharge Machine, 15.7" X, 9.8" Y, 7.87" Z, Fanuc control, 14" color CRT with graphics, 1999

Charmilles Technologie #Robofil-310, 15.7"X,9.8"Y,15.75"Z, 8 filters, 1994, #16258J

Charmilles #Robofil-310, Wire EDM, 15.75"X, 9.85"Y, 15.75"Z, 1994, #7033

Charmilles #Robofil-310, wire EDM, 16" x 10" x 16"travels, AWT, 1995

Charmilles #Robofil-330F, 15.75"x11.81"x15.75"trvls,Fanuc FS 16i-W,IsoPulse,'97,#0665

Charmilles #Robofil-330F, wire EDM AWT,Fanuc 16i,chiller,USB,manuals,low hrs,1998

Charmilles #Robofil-330F, submerged wire EDM,Fanuc 18iWA,15.75"x11.81"x15.75",1998

Charmilles #Robofil-2020SI, wire Electrical Discharge Machine, 12.59" X, 8.66" Y, 4.49" Z.23.62" x16.93" table, 2003

Charmilles #Robofil-4030SI, 5-Axis, 17.63" X, 12.52" Y, 6.22" Z, 1.89" U & V, submerged, tool cabinet with parts, 2001, #28981

Charmilles #Robofil-F1310, 10"x 16"x 16"travels,+/-30°taper,RS232,AWT,chiller,20-22 sq.in/hour,1995

Charmilles #Robofil-Fl510, 27.55"X,15.75"Y, 15.75"Z, Fanuc control, chiller, glass scales, 1993

Chmer #A422S, CNC wire EDM, 31.5" x22" table, 15.7" X, 9.8" Y, 8.6" Z, +/- 14.5° taper, 2010, #48877

Chmer #CW360S, 14.1" x 9.8" x 8.6"travel, +/- 14.5 deg taper, AWT, RS2342, 2004

Chmer #CW850HS, 32 x 20 x 12"travels, submerged, AWT, chiller, MDI, RS232, USB, LAN, 2005

Chmer #G64S, 24 x 16 x 16"trvls,submerged,AWT,glass scales,16"Z-travel opt.,+/- 21 taper,30kg spool,wire chopper,AC/DC,2011

Elox #HRP-DC-203, 36"x 48"table, 18"x 24"platen, 48"X, 20"Y, 12"Z, #22298

Fanuck #Alpha-1iC-S/AWF, 21.7" x14.6" x 16.1", Fanuck 180is-WB, AWT, 5-Axis, HS Digital AC power supply, 2005, #0687

Fanuc #C400iA, Electrical Discharge Machine, 14.5" X, 10.6" Y, 10" Z,.004"-.012" wire diameter, Fanuc 32i WB, 2014, #3023

Fanuc #Robocut-Alpha-0iA, Wire Electrical Discharge Machine, Fanuc 18i-W CNC Control, 1999

Fanuc #Robocut-FRC-0B, wire, 11.81" X, 9.85" Y, Fanuc 16W, Dielectric tank & filter, 1994

Knuth #DEM320A, CNC wire Electrical Discharge Machine, 12.59" X, 9.84" Y, DX-XPCNC software, handheld Control, 2015

LeBlond #EC7050, 4-Axis wire EDM,filtration sys,PC based ctrl upgraded 1995,1984/89

LeBlond #EC7050, 4-Axis, s/n D59-26 Control, s/n RBC-000095-140.1MGN-E-15 width, retrofit 1984/1989

Makino #U3, Electrical Discharge Machine Wire, 14" X, 10" Y, 8" Z, 24" x17" table, 22 lb.wire spool, 8.66" max oper. thickness,.004"-.012" max wire, automatic rethreading, 2015, #3031

Makino #U3, CNC wire Electrical Discharge Machine, 14.6" X, 10.6" Y, 8.7" Z, 24.8" x17.7" table, Hyper 1 Control, 2017

Makino #U86, wire EDM, 31.5"X,23.62"Y,20.47"Z, 5-Axis, MGW-N3, 48"x35.8"tbl., 2004

Makino #U1310, traveling column wire EDM,Hyper 1 CNC,51.57"x39.76"x24.41"trvls,2014

Mitsubishi #CX-20, Electrical Discharge Machine, Mitsubishi 32 Bit control, 1995

Mitsubishi #DWC-110, Wire Electrical Discharge Machine

Mitsubishi #DWC-300H, wire Electrical Discharge Machine, 19" x 39" x 18" travels, 29.5" x 39.4" table, 1988, #30163

Mitsubishi #FA20, 137.x19.6x11.8" trvls, Mitsubishi 64-Bit Control, submerged, AWT, chiller, 2004, #0728

Mitsubishi #FX-1, 13.77" x 9.84" x 8.66", 3-Axis, 24.8" x 20.8" table, wire threader, autolube, 51.18 IPM, 1.25" taper U-V travel, 1996

Mitsubishi #MD+Pro-II, 12.6" X, 9.8" Y, 8.6" Z, Mitsubishi V350, 21.2" x16.9" tbl., 2007

Mitsubishi #RA90, 12.6" x 9.8" x 6.49" travels, non-submerged, Mits RAS-1 Control, power mister, air cooling unit, 2000, #0727

ONA #AX10+, 59.1"x39.4"x27.5",78.7"IPM,taper,UV-Axis,76"x63"x27.5"workpiece,2008

ONA #PD-4.120SI,59"X,39.37"Y,13.77"Z, 6 sta., Datic S-120, 1997

ONA Prima #S-250, Wire Electrical Discharge Machine, Low Hours, 350mm X, 250mm Y, 200mm Z, Automatic wire feeding, Ona CNC Control, 2001

ONA Prima #S-250+AWF, 4-Axis CNC Wire EDM,13.7" x 9.8" x 7.8",auto wire feed,2002

Sodick #A320/EX21, 12.5"x 8"x 7", +/-10°, RS232, chiller, 15-16 sq.in/hr., 1994

Sodick #A325/MK25, 14" x 11" x 8" travels, submersible, AWT, installation available, 1998

Sodick #AD325L, CNC wire Electrical Discharge Machine, Sodick LN1W CNC, 31.4" x16.77" table, .006"-.013" wire diameter, 2008, #3973

Sodick #AG40L, 15.75"X,11.81"Y,10.63"Z,23.62" x 15.75"tbl,Sodick LN2 Ctrl,TMM3 Carbide Circuit,chiller,hand pendant,2012

sodick #AQ327L, Wire Type Electrical Discharge Machine, 14.57" X, 10.63" Y, 9.84" Z, 2007

Sodick #AQ327L, CNC Wire Electrical Discharge Machine, Sodick LQ1W control, 2007, #7773

Sodick #AQ327L/LQ1W, 15" x 11" x 10" trvl,AWT,submersible cutting,Linear X,Y,U,V,2006

Sodick #AQ537L, wire Electrical Discharge Machine, automatic threading, submerged, 23" X, 15" Y, 14" Z, 2005

Sodick #AQ537L/LQ33W, 22" x 14" x 14" travels, linear in x, y, u, v, rise/fall tank, submersible, AWT,USB, install availabile

Sodick #AQ750LH, 29.5x19.7x23.6" travel, AWT, Ext Z +8" - 23.6", linear motor, glass scale, 2011

Sodick #AQ750LH, wire Electrical Discharge Machine, 29" X, 16" Y, 24" Z, 49.7" x38.3" work tank, LNZWH, 2015, #82032

Sodick #AQ750LH, 29.53" X, 19.68" Y, 24" Z, 30.31" U, 20.47" V, LN2WH Control, hand controller, 2011, #81958

Sodick #BF275, Wire Electrical Discharge Machine, 7.87" cross travel, 5.90" vertical travel, 11.81" longitudinal travel, Fine Sodick Mark IX EDW Control, 1988

Sodick #VQ535L, CNC wire Electrical Discharge Machine, LQ1W Control, 21.6" X, 13.7" Y, 11.8" Z, 2004

Sodick #VZ300L, LN2W Control, linear motors, 14" x10" x9" trvls, +/-15 deg. taper, 2013, #30698

TEK4 #4g/FHD, 6-Axis,wire EDM drill,16"X,12"Y,16"Z,(U) 360°(B) +/-135°,Haas CNC,'13

Vollmer #QWD-76P, for sharpening PCD tipped tools, 250mm diameter, 200mm length, 1998