Used STRAIGHTENERS, SHEET & STRIP (Also See Levelers, Roller) - COIL HANDLING EQUIPMENT For Sale

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

Wenco Machinery Corp, Ringwood, NJ 888-439-3626 (Email: eric@wencomachinery.com) E. Schouten

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Alma Machinery Co Inc, Columbia, TN 615-369-7788 (Email: ken@almamachinery.com) Ken King

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: jdgaston@msn.com) Jim Gaston

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Jonathan Peterson

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

Pneumatic Feed Service, Romeo, MI 586-774-6775 (Email: daver@pressfeed.com) David M. Reiman

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

Pneumatic Feed Service, Romeo, MI 586-774-6775 (Email: daver@pressfeed.com) David M. Reiman

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

Bass Machinery LLC, Toledo, OH 419-243-2277 (Email: sales@bassmachinery.com) Sales

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Pneumatic Feed Service, Romeo, MI 586-774-6775 (Email: daver@pressfeed.com) David M. Reiman

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Bass Machinery LLC, Toledo, OH 419-243-2277 (Email: sales@bassmachinery.com) Sales

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

D & H Machinery Inc, Toledo, OH 419-841-3586 (Email: sales@dnhmachinery.com) Sales

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp

Pneumatic Feed Service, Romeo, MI 586-774-6775 (Email: daver@pressfeed.com) David M. Reiman

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

Bass Machinery LLC, Toledo, OH 419-243-2277 (Email: sales@bassmachinery.com) Sales

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Email: sales@utubeonline.com) Sales Dept.

D & H Machinery Inc, Toledo, OH 419-841-3586 (Email: sales@dnhmachinery.com) Sales

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

Pneumatic Feed Service, Romeo, MI 586-774-6775 (Email: daver@pressfeed.com) David M. Reiman

Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Email: sales@utubeonline.com) Sales Dept.

D & H Machinery Inc, Toledo, OH 419-841-3586 (Email: sales@dnhmachinery.com) Sales

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Surplus Asset Auctions LLC, Barrington, IL 630-690-7986 (Email: Mike@surplusassetauctions.com) Mike Gordon

HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

Pneumatic Feed Service, Romeo, MI 586-774-6775 (Email: daver@pressfeed.com) David M. Reiman

CJE Machine, Alpharetta, GA 770-886-6827 (Email: bigern@cjemachine.com) Chris Ernest

D & H Machinery Inc, Toledo, OH 419-841-3586 (Email: sales@dnhmachinery.com) Sales

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Midwest Machinery LLC, W Bloomfield, MI 248-626-0200 (Email: sales@midwestmachy.com) Mike Rybak

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Freedom Machinery Company Inc, Grand Rapids, OH 419-832-0100 (Email: sales@freedommachinery.com) Dave/ Gari

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

D & H Machinery Inc, Toledo, OH 419-841-3586 (Email: sales@dnhmachinery.com) Sales

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

D & H Machinery Inc, Toledo, OH 419-841-3586 (Email: sales@dnhmachinery.com) Sales

Met-Pro Machinery Inc, Oakland, MI 248-693-1400 (Email: jeff@metprosales.com) Jeff Lengel

D & H Machinery Inc, Toledo, OH 419-841-3586 (Email: sales@dnhmachinery.com) Sales

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Met-Pro Machinery Inc, Oakland, MI 248-693-1400 (Email: jeff@metprosales.com) Jeff Lengel

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

Midwest Machinery LLC, W Bloomfield, MI 248-626-0200 (Email: sales@midwestmachy.com) Mike Rybak

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

= photo available Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller Video

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search

COIL HANDLING EQUIPMENT:STRAIGHTENERS, SHEET & STRIP (Also See Levelers, Roller)

4" x .078" Rapid-Air #SC4P, straightener, #9185HP

4" x .078" Rapid-Air #SC4PL, straightener, up to 700 IPM, Loop control arm, #9199HP

4" x 40" wide straighteners, over 25 in stock

4.7" x .122" Bruderer #148-020-BC, sheet & strip straightener, 19-rolls, 2 supports

4.7" x .157" Kohler #24.120/21b, 21-roll x .94" diameter, programmable, 1990, S26515

6" x .025" Littell #308-9PDS-1, straightener,.014 - 024" TH Mild Steel, 1983, $4950 OBO

6" x .06" Combination straightener/feeder, exit & entry powered feed rolls w/ guide bars, spring loaded, air cooled & brake, #3479

6" x .078" Cooper Weymouth #6A, straightener, 208 V., 3-phase, #2099

8" x .025" Littell #208-17PD, stock straightener, 17-rolls, 1.2" roll diameter, 1971, #13094J

8" x .025" Littell #208-17PD, stock straightener, 17-rolls, 1.2" roll diameter, 1971, #12829J

8" x .041" Littell #308-7PDL, coil straightener, 7 rolls, 2.25" roll diameter, 10-60 FPM, #27914

8" x .041" Littell #308-HVS, straightener, 3-rolls over 4-rolls, pinch rolls, 220/440V.(3 available)

8" x .06" Copper Weymouth Peterson, 17 roll straightener, entry pinch rolls, variable speed, loop Control

8" x .062" Perfecto, (9) 1.5" dia.rolls, 10-100 FPM, loop Control arm & switch, #22164

10" x .081" Rowe Straightener, S/N 10047

10" x .1" Benchmaster #910, coil straightener, 7 rolls, 2.25" roll diameter, 25-100 FPM, #27714

12" x .025" Littell #212-17, 17-roll straightener, entry & exit pinch rolls, loop control, lube system, good condition, #13657J

12" x .03" Littell #212-17PD, 17-roll straightener, entry & exit pinch rolls, photo eye loop control, lube system, #13661J

12" x .03" Littell #212-17PD, 17-roll straightener, entry & exit pinch rolls, photo eye loop control, lube system, #13655J

12" x .05" Rapid-Air #SC12, 9 rolls, 0-825 IPM variable speed, loop control, .015"-.050" thick, 115 V., 2001, #10612

12" x .06" Copper Weymouth Peterson, 17 roll straightener, entry pinch roll, variable speed, loop Control

12" x .06" Littell #212-17PD, 17-roll straightener, entry & exit pinch rolls, photo eye loop control, lube system, #13664J

12" x .06" Littell #312, straightener, serial #22061-63, 2 pinch rolls, 3-1/2" roll diameter, 120 FPM, #13533J

12" x .06" Littell #312-9PD, 9 rolls, 0-120 FPM, variable speed, 2.25" roll diameter, 3 HP, loop contorl, 1996, #10725

12" x .06" Minster #2400-12-17, straightener, 17-roll, 1.7" roll diameter, power upper/lower rolls

12" x .06" Minster / Perfecto #2400-12-17MHS, straightener, adjustable guides, 1980, #5315

12" x .06" Pennsylvania powered coil straightener, new

12" x .065" Littell #CHS LAM 2-21-12, 17-roll straightener, entry & exit pinch rolls, photo eye loop Control, lube system, #13654J

12" x .065" Littell #CHS LAM 2-21-12, 17-roll straightener, entry & exit pinch rolls, photo eye loop Control, lube system, #13665J

12" x .07" Pennsylvania Industries #MSS129V, 9-rolls, 1.5" diameter, 0-975 IPM variable, R to L direction, 1994, #10542

12" x .074" Littell #312-7PDL, 10-60 IPM, 2-1/4" roll diameter, 3/4 roll align., 1 HP, #77318

12" x .08" Littell #312-7PDL, straightening machine, 7 rolls, 20-120 FPM, 1992

12" x .08" Littell powered coil straightener

12" x .09" Littell precision powered coil straightener

12" x .12" Copper Weymouth Peterson #12-B, 17-roll straightener, entry & exit pinch rolls

12" x .125" Pennsylvania Industries #SS127D, 3 over 4, 2.36" roll diameter, 2.24 HP, pendant Control, #27579

12" x .125" Perfecto #22-12-7, powered straightener, 7-roll, entry/exit pinch rolls, variable speed motor, #13386J

12" x .156" Littell, 3 over 4 straightener, entry pinch, control arm, 3 HP

12" x .16" Regal #250-55-12, powered straightener, 7 roll, air lift entry/exit pinch rolls, variable speed motors, #13192J

13.7" x .157" Soprem #BR-19-350-35, straightener, 2005, #2104

15" x .025" -.180" PRE straightener, 11 straightening rolls, 2.75" roll diameter, 1999

15" x .11" Press Room Equipment #PR-MD-15-DC-IC, 17-rolls, 0-100 FPM, vari-speed, 1997

15" x .125" Rowe #B-15, S/N 24904, #016442

15" x .125" Rowe #B-15, stock straightener, 7 straightening rolls, entry/exit pinch rolls, 25-75 FPM, 2 HP, #13384J

18" x .041" Littell #M1984, material straightener, Speed 10"-60" per minute

18" x .06" Littell #218-17PD, 17 rolls, 2" dia rolls, 12" x.125", backup rolls, loop control, 7-1/2 HP, 1977, #10740

18" x .065" Perfecto precision powered coil straightener

18" x .08" Perfecto #17-18-9, straightener, 60 SPM, #73629

18" x .135" Littell #418-6PDL, 7 roll, 3-1/8" diameter rolls, peeler, hold down roll, 15-90 variable speed, loop control, 1989, #10610

18" x .164" Littell, 3 over 4 straightener, 10-60 FPM, (2) sets of pinch rolls

18" x .165" Rowe #B-15, coil straightener, 2.75" roll diameter, 2 HP, 25-75 FPM, #28570

18" x .187" Littell #620D-5PD, straightener/uncoiler, 10000 lb.capacity, 20" width, 52" outside dimension, #10481

18" x .210" American Steel Line #4-11, motorized stock straightener, 7-rolls gear driven, entry/exit pinch, 1980, #9964

20" x .065" Rowe #R-20TC, 7-roll straightener, entry/exit pinch rolls, forward/reverse/jog, s/n 18180

20" x .065" Rowe #R-20TC, 7-roll straightener, entry/exit pinch, forward/reverse/jog

20" x .065" Rowe #R-20TC, 7-roll straightener, entry/exit pinch rolls, forward/reverse/jog, s/n 22416

20" x .065" Rowe #R-20TC, straightener, 7 roll, entry/exit pinch rolls, forward/reverse/jog

20" x .118" Cattaneo #RMA60-500, straightener, 1996, #10785-HK

20" x .190" Rowe #C5, 7-rolls, 4" diameter, entry/exit pinch roll, adjustable roller guides, spare head only, no drive / cabinet, #9836

24" x .05" Littell #424-HRP, power straightener, 5 rolls, 2 over 3 entrance pinch rolls

24" x .05" Rowe #R-24TC, powered straightener, 7 straightening rolls, 2 sets of pinch rolls, 1.5 HP, serial #18062, #13762J

24" x .09" Amada #SL-6023, sheet leveler, digital read out

24" x .125" CWP precision powered coil straightener

24" x .156" Littell #626-7PD, 7-roll powered straightener, 4" roll diameter, 1980, #9100

24" x .175" Pennsylvania Industries, 3 over 4 straightener, entry/exit pinch feed, 5 HP

24" x .187" American Steel Line #4-11, stock straightener, 3" diameter, 3 & 4 roll, entry/exit pinch rolls, variable speed, 1995

24" x .187" American Steel Line #4-11, stock straightener, 3 over 4 powered straightening rolls, 3" roll diameter, vari-speed, 1995, #13944J

28" x .048" Dahlstrom #28-18-17, 8-over 7-work rolls, 10 HP, 8 over 7 work rolls, #1930

28" x .135" Pro-Eco #FS6-7-3-30, straightener, 7 work rolls, 3" dia x 32" face.'80

28" Pennsylvania Industries #SRF-28P-P, roll feeder w/30" W Feed-Lease 5-roll straightener, #10548

30" x .093" Rowe #B-30, straightener, 7-roll, entry/exit pinch rolls, air lift, peeler

36" x .03" Littell precision powered coil straightener

36" x .07" Red Bud #SM436, straightener, 5 over 6 rolls, pneumatic loading table

36" x .075" Iowa slitter head & straightener, entry/exit pinch rolls, 1979

36" x .08" Mecon #4STR36, 7 rolls, 3" dia. rolls, straightener, entry peeler & hold down roll, 1995

36" x .090" Littell #436-7PD Straightener, 7-rolls, entry pinch rolls, 3.125" roll diameter, 12-72 FPM, 5 HP, 1980, #8558

36" x .09" Littell #436-7PD, 7-rolls, 56" pass line, 12-72 FPM

36" x .125" Perfecto #S283607, powered stock straightener, 2.75" dia., 7-rolls, entry/exit pinch rolls, Allen-Bradley drive

36" x .25" Perfecto #S283607, powered stock straightener, 7 straightening rolls, 960 IPM, hold down arm, 1995, #13937J

COIL HANDLING EQUIPMENT:
STRAIGHTENERS, SHEET & STRIP (Also See Levelers, Roller)