Browse:  Machinery Electrical
RSS Twitter Facebook Linkedin Instagram Blog Surplus Record

CHEMICAL, PETROLEUM, GAS & PROCESSING EQUIPMENT:
MILLS (Also See Mills, Pug, this Section)

Plantex Equipment vast inventory of plants or individual pieces of equipment
There are 194 listings in this category
Update: Sun, May 31, 2020 00:34:33
Advanced Search
Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added
 
 
Original Sort

Adamson, two roll mill, 84" Wide x 26" x 26" diameter, unitized base, Falk gearbox with 79.288:1 gearbox rating, #3155-2

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Allis-Chalmers Co., vintage allis roller mill corn cracker, 4 horizontal rolls, #17526

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
J & M Industrial Inc, Millwood, WV 304-273-0795 (Email: equip@jmindustrial.com) Sheldon Sharp

Alpine #100AFG, fluidised bed opposed jet mill, Stainless Steel, 100,, dia. chamber, 3 nozzles, serial #85610, 1986, #3135-1

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Alpine #160-Z Kolloplex pin mill, Carbon Steel, 500 lb./hr fines to 10 microns, on base

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

APTM #SM1-C3 Superjet Micronizer jet mill

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Bauermeister #UTL Universal lab mill, Stainless Steel, 5" diameter turbo rotor grinding assembly, 3 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Bauermeister #UZU-11 Universal mill, 3.25" x 5.75" inlet, 6.5" x 18" discharge, 15 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Bliss #BR-2000D-250 Pioneer Series pellet mill, Carbon Steel, 200 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Bliss #ER4424TF hammermill, 44" x 24", CS, 150 HP, #1271903

  Photo
 Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay

California Pellet Mill #CL, lab mill, type 3, 3 hp, 460 volt main motor drive with VFD ctrlr,.25 hp auger feeder,#3413-1

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

California Pellet Mill #CL type 3 lab pellet mill, 3 HP, VFD controller, 25 HP auger feeder with Eriez vibrating feeder

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

CE Raymond imp mill, Carbon Steel,96"diameter x 36"W rotor w/1"thick fixed blades,25"x 36"top opening,belt driven,#34650 (2)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Chicago Boiler #3-P Red Head vertical sand mill, jacketed chamber, 7.5 HP, explosion proof motor

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

Chicago Boiler #3P, Red Head vertical sand mill, rated 5-125 gallon batch size, XP, with feed pump, #21074

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Chicago Boiler #3P, Red Head sand mill, open & closed face (6)

  Photo
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Chicago Boiler #8-P Red Head vertical sand mill, jacketed chamber, 15 HP, explosion proof main drive

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

Chicago Boiler #8P, sand mill, serial #93-N2036-4, 15 HP, 1755 RPM, 230/460 V.

 
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Chicago Boiler #8-P, Red Head sand mill (9)

  Photo Spec Sheet
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Chicago Boiler #16-P, Red Head sand mill (5)

  Photo Spec Sheet
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Chicago Boiler #30P, Red Head sand mill, 40 HP, XP, #26902

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

CPM & Sprout Models, Pellet Mill

  Photo
 RFQ
Continental-Agra Equipment, Newton, KS 316-259-4709 (Email: JBeyers634@aol.com) Jim Beyers

Dorr Oliver #Gorator-6x4x10, slurry grinder/macerator/delumper, 1-200 gpm, 316 SS, 50 HP, #1271771

  Photo
 Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay

Drais Cosmo #2, bead mill, #2599-15

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Drais #PML-V+H, automatic, continuous operation, ultrafine wet grinding laboratory model, jacketed chamber

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

Drais Perl #DCP-Megaflow ACS-800/PUC, S/S mill,62 liter grinding vessel volume,ctrl panel w/ABB drive,2005,#35345

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Eiger #2L-M-VSE-EXP Motormill laboratory bead mill, Stainless Steel, 2 liter jacketed chamber

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

Eiger #ABML .75 EXP, lab media mill,750 literStainless Steel jacketed chamber,4 KW,230 motor,.5 HP feed pump,s/n #557,#37909

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Elliott #ACM200, air classified impact mill, CS, 200 HP main, 30 HP whizzer, 1-8000 PPH, 200-600 Mesh, #1270772 (2)

  Photo
 Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay

Entoleter #27-2-LCBP, carbon steel, 30 HP, centrifugal impact mill, #16543

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
J & M Industrial Inc, Millwood, WV 304-273-0795 (Email: equip@jmindustrial.com) Sheldon Sharp

Entoleter Series 27-2 CBP, centrifugal impact mill,50 HP,1765 RPM,230/460 V.,#12300

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
J & M Industrial Inc, Millwood, WV 304-273-0795 (Email: equip@jmindustrial.com) Sheldon Sharp

Entoleter centrifugal impact mill, carbon steel, 20 HP, #28303

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Epworth SWMILLS, 25-100 gallon (7)

  Photo Spec Sheet
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Farrel, 2-roll mill, 60"wide x 22"dia.rolls, cored rolls, unitized base, serial #79A1171, #2986-1

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Farrel, Two Roll Mill, 200 HP, 22" x 60", #3176-1

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Farrel, Two Roll Mill, 200 HP, 84" x 28", #2584-1

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Farrel, 2-roll calender mill, 16"diameter x 17"long rolls, cored & chromed rolls, 30 HP, #15419

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Feeco Turbulizer Agglomerator #12"Pin-Mixer, 12"dia x 60''long, 304 SS, 25 HP, #1269881

  Photo
 Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay

Fitzmill #D6A, S/S, 5 HP, 200 volt direct coupled motor with VFD, serial# 10482, #3398-15

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fitzmill #D6A, Stainless Steel,5 HP,230/460 V.,on portable Stainless Steel base,missing mill body,top & body,#32153

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fitzmill #DA0S6, Stainless Steel hammermill, 16 fixed knife / impact blades, 20"W x 20"L x 4"D feed pan

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

Fitzmill #DASO6, S/S,cantilevered,less rotor,screw feeder w/hopper,.75 HP,230/460 V.XP,5 HP main,230/460 V.XP,legs,#45972

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fitzmill #DKAO12, S/S, screw feed, 30 HP, #17421

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fitzmill #M5A, S/S, pan feed, 3 HP XP, fixed hammers, feed hopper, #208-13

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fitzmill #M5A, S/S, pan feed, 1.5 HP XP, fixed bar type hammers, feed hopper, #208-12

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fitzpatrick Fitzmill #6.6DX12L Guiloriver

  Photo
 RFQ
Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

Fitzpatrick Fitzmill #14LX14D Guiloriver

  Photo
 RFQ
Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

Fitzpatrick #D6, mill, 7.5 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick #D6 Comminutor, Fitz mill, 10 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick #D6, 7.5 HP, Stainless Steel, #1270689

  Photo
 Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay

Fitzpatrick #D6A Fitzmill, 5 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick Fitzmill #D6A, Stainless Steel, containment, #2789-8 (2)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fitzpatrick #D6A Fitzmill, 5 HP, PLC controls with motor VFD controllers

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick Fitzmill #D6A, S/S,screw feeder w/.35 KW,230/400 V./50 Hz,S/S base w/2.5 KW/230/400 V.,50 Hz.main,1995,#46568

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fitzpatrick #D6A Fitzmill, S/S construction,5 HP,fixed knived,gravity feed cover,cantilevered design,serial #10758,#28091

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fitzpatrick #D6A Fitzmill, 5 HP, includes Stainless Steel panel with Telemecanique ALTIVAR-5 VFD, 1992

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick #D6A Fitzmill, 5 HP, Allen Bradley Panleview

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick #DAS-6, 5 HP, Stainless Steel, #1270797

  Photo
 Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay

Fitzpatrick Fitzmill #DAS06, 10 HP, variable drive with rotary feeder

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzmill #DAS06, variable speed, auger feed, Stainless Steel hammermill with 30" x 40"hopper

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

Fitzpatrick Fitzmill #DAS06, 5 HP, Stainless Steel hammermill

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick Fitzmill #DASO-6, S/S, gravity feed on base w/motor, S/N 9451, #3361-2

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fitzmill #DASO-6, stainless steel hammer mill, 16 fixed knife/impact blades, 7.5 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

Fitzpatrick #DASO-6, Stainless Steel hammer mill, with 12" x 12" x 12"hopper, 4"dia. feed screw, 16-impact blades

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

Fitzpatrick Fitzmill #DKAS012, 15 HP, pan feed, variable speed

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick Fitzmill #DKAS012, 30 HP, reversible chamber with fixed blades

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzmill #DKAS012, Stainless Steel hammermill, 12" x 12"feed throat, 32 fixed knives / impact blades, 20 HP motor drive (3)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

Fitzpatrick Fiztmill #DKAS012, 30 HP, gravity fed on stand

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick Fitzmill #DKASO12, S/S,15 HP,dual screw feeder driven by 1 hp,208-230/460 V.,fixed blades,#3189-1

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fitzpatrick Fitzmill #J6 Homoloid hammermill, 3 HP, swing type hammers

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick Fitzmill #JT Homoloid, 7.5 HP, fixed blades

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick Fitzmill #L1A Communitor, 0.5 HP, 2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick Fitzmill #L1A, 0.5 HP, on stand with casters, 2013

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick Fitzmill #L1A, Stainless Steel w/isolator, .5 HP, VFD controller, 2005, #36270

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fitzpatrick Fitzmill #L1A, 0.5 HP, 2005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick Fitzmill #M5A, 3 HP, cantilevered design, fixed hammers, feed hopper

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick Fitzmill #M5A, 5 HP, cantilevered design, fixed bar type hammers, feed hopper

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick Fitzmill #M5A, 1 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick Fitzmill #M5A, 1.5 HP, cantilevered design, fixed bar type hammers, feed hopper

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Fitzpatrick Rotors, 3-Used Rotors for #SDAS06, #49572

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fox, Eductor assembly for jet mill application, 8"Stainless Steel, unused, #11572

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
J & M Industrial Inc, Millwood, WV 304-273-0795 (Email: equip@jmindustrial.com) Sheldon Sharp

Fryma #MS-18, coball mill,1.4034 S/S,rated 2.5 bar at 110 c internal,jacketed for 2 bar at 110 c,2001,#2628-6

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fryma #MS-18 Coball Mill type MSP-18, 10 HP, 2.5 bar internal, 2.0 bar jacket, 1989

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

Fryma #MS-32 Coball Mill, type MSP-32, 30 HP, 2.5 bar internal, 2.0 bar jacket, 1992

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

Fryma #MS-Z12, coball mill, Stainless Steel, ultra fine wet grinding, hardened grinding surfaces, 1992, #29538

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fryma #MSM-12, Stainless Steel Coball mill

  Photo
 Visit Dealer's Equipment Listings  RFQ
Wohl Associates Inc, Bohemia, NY 631-244-7979 (Email: info@wohlassociates.com) Andrew Wohl

Fuji Paudel #BR-150, S/S basket granulator, 5-2mm granule size, control panel, serial #3600851, 2005, #46626

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fuji Paudal #EXDS-60 Xtruder, stainless steel, serial# 14423, 1982, #2883-8

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fuji Paudal #LAB-1, Lab Type Powder Mill, variable speed controls & gauging, #25751

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

Fuji Paudal #QJ-230, Marumerizer, S/S, 230mm dia disk, jacketed bowl on base, 1 HP, #3109-23

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fuji Paudal #QJ-230, Stainless Steel Marumerizer, rated up to 30 kg/hr., #30420

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fuji Paudal #QJ-400, Marumerizer, S/S, with control panel, serial #21426, 1992, #46624

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fuji Paudal #QJ-400, S/S Marumerizer,400mm dia.jacketed bowl w/grooved disk,2.2 KW,380 V.vari-speed,1988,#47330

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fuji Marumerizer Spheronizer #QJ700, Serial 24149, #3299-2

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fuji Marumerizer Spheronizer #QJ700, S/S, jacketed bowl, S/N 20050, 1990, #3292-18

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fuji Marumerizer Spheronizer #QJ700G, Serial 490099, #3299-3

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fuji Paudal marumerizer, stainless steel construction, jacketed bowl, with variable speed motor drive, #2883-2

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Fuller sag mill, 18' x 10-1/2', 1500 HP, rubber lined, 1998

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery & Equipment Co, San Francisco, CA 415-467-3400 (Email: dominic@machineryandequipment.com) Dominic Piazza

Gericke #N400x800 Nibbler low speed deagglomerating mill, 75 HP, low hours, 2009

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Gifford Wood #VT72BS, vertical, rotor / stator mill,304 S/S contact parts,with a 5 gallon jacketed hopper,recirculation sys

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

Glatt #GS220, Stainless Steel cone mill, 4 KW motor, #3070-1

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Glatt #GSF-180, underdriven rotor sieve, Sanitary Stainless Steel, 180mm rotor, 3 KW, 1999

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

Glatt Quick Sieve #TR80, Stainless Steel, .5 HP, on stand with feed chute, #42614

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Hosokawa #1SH Micron MikroPulverizer, 1" diameter, 5 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Hosokawa #1500/3AFG, fluidized bed opposed jet mill, 2200mm, unused, 2002

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Hosokawa Alpine #250UPZ fine impact mill, 3 HP, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Hosokawa #5MA, Micon powder tech mill,classifys & conveys,S/S contact parts,5 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Ingalls Process Equipment, Painesville, OH 440-352-9403 (Email: dick@ingallsequipment.com) Dick Ingalls

Hosokawa Alpine #A250CW, mill, 30 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Italo Danioni Milano #524, pin mill crusher, 40 HP, 8" x14" inlet, 17.5" x5.5' Stainless Steel grinding wheel

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
J & M Industrial Inc, Millwood, WV 304-273-0795 (Email: equip@jmindustrial.com) Sheldon Sharp

Italo Danioni Milano #524, pin mill crusher, 8" x14" inlet, 4" outlet, 40 HP, 17.5" x5.5' Stainless Steel wheel, 230/460 V., 60 Hz, 3-ph, #17454

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
J & M Industrial Inc, Millwood, WV 304-273-0795 (Email: equip@jmindustrial.com) Sheldon Sharp

Italo Danioni Milano #524, pin mill, #17503

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
J & M Industrial Inc, Millwood, WV 304-273-0795 (Email: equip@jmindustrial.com) Sheldon Sharp

Jacobson delumper, 10" x 12", 316 SS, 10 HP, w/screw feeder, 3 HP, 4400 PPH, #1272231

  Photo
 Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay

Jersey #2-3LLLB inline grinder, Stainless Steel, 3" inlet & outlet, unused, never installed

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

Kady #0C, 70 gallon mill, Kinetic dispersion, Stainless Steel, jacketed, belt driven, 50 HP, #19263

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Kady #4C, Stainless Steel dispersion mill, bottom entry, high-speed (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Kady #5C, 350 gallon mill, Stainless Steel, jacketed, Kenetic dispersion, 125 HP, belt driven, #19262

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Kady #5C, Stainless Steel, 300 gallon, 100 HP, 2 side wall baffles, #29044

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Kady #500-BS, Hastelloy C mill, rubber lined, bottom entry (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Kady #1000, 304 Stainless Steel mill

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Kady, 300 gallon mill, 75 HP, Stainless Steel, #26892

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Kady Mill Emulsifier, 75 HP, jacketed, Stainless Steel tank, #121

  Photo Spec Sheet
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Kady mill, Stainless Steel rotor stator design,SS cooling coil,lubrication system,30 HP,230/460 V.XP motor,#38682

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Kady Mill, Kinetic dispersion, 200 gallon, Stainless Steel, jacketed, 100 HP, #15756

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

KEK #340 Betagrind cone mill, Stainless Steel, V belt driven, 10 HP, mounted on fixed base

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

Kemutec #2H, universal mill, 100 HP, #194-6

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Kemutec #220CM, cone mill, S/S construction, S/S stand, 5 hp motor, serial# B37240, built 2007, #3006-1

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Kemutec #6419, Cone Mill, S/S, missing beater, S/N 67453, #10634-9

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Kemutec KEK #CM340, Stainless Steel cone mill, 10 HP, 230/460 V., 1770 RPM, 3-Phase, #15441

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
J & M Industrial Inc, Millwood, WV 304-273-0795 (Email: equip@jmindustrial.com) Sheldon Sharp

Kemutec KEK #CM540, Stainless Steel cone mill, #194-2 (3)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Koppers #21WV, 5 tph, 200 HP, #1271566 (3)

  Photo
 Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay

LB Bohle #BTS-200, S/S Cone Mill, less beater, w/screen, mtd.on stand, for LB Bohle lift, #48512

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

LB Bohle #BTS-200, Stainless Steel cone mill,less beater & screen,mounted on stand,460 V.,serial #0412848005,2005,#42431

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

LCI Fuji Paudal #DG-L1/QJ-230, Extruder Marumerizer,S/S,1-jktd./1-unjacketed barrels,230 V,VFD motor controller,480 V.,#45995

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Luwa #QJ230, marumerizer, #2813-1

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Microfluidics Microfluidizer #M-140K, #2700-2

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Mikro #2TH, mill, Carbon Steel, 20 HP

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery & Equipment Co, San Francisco, CA 415-467-3400 (Email: dominic@machineryandequipment.com) Dominic Piazza

Mitts & Merrill #13CSE Hog Grinder, 300 HP, 18 knives

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Mitts & Merrill, 20"hog mill, 250 HP, very nice condition

  Photo
 Visit Dealer's Equipment Listings  RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

Morehouse Sand Mills #10-25

  Photo
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Morehouse #12-30 Sand Mills, 50 HP, (11)

  Photo
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Morehouse #12-30 Sand Mill (3) #1043

  Photo
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Morehouse #2M-7-15, 2-Chamber Sand Mill, #1372

  Photo
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Morehouse 4-Chamber Sand Mills, Vertical (3)

  Photo Spec Sheet
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Netzsch Condux #CSM-360DSF, Classifier Mill, 3600 rotor max at 30 HP, S/N 6589, #3451-1

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Netzsch #RM15GL, vertical sand mill, Stainless Steel, 30 HP XP motor, belt driven, jacketed bowl, #16485

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Netzsch #RM33GL, vertical sand mill, 20-200 GPM, 30 HP XP motor, jacketed bowl, #16486

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Netzsch 50 Liter Horizontal Mill, 50 HP, #1326

  Photo
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Nippon #IDS-2 Pnuematic Supersonic jet mill, Stainless Steel, pulse jet dust collector, cyclone fines collector, 1983, #29278

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

P & E Co. fluid energy mill, 10", Stainless Steel, feed hopper, #15696

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Premier / Netzch #CSD5/2V, Dispersion Mill, lab mixer

  Photo
 Visit Dealer's Equipment Listings  RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

Premier #SME-2RS, Unimill, vertical sand mill, Stainless Steel jacketed chamber, 1-4 GPH, 1.5 HP

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

Quadro Comil #194FS, 304 S/S, 5 HP, on legs, #24917

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Quadro Comil #194FS, all 304 Stainless Steel, 5 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Quadro Comil #194S, Allen Bradley controls, 1 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Quadro Comil #194S, S/S, serial# 194-0370, #3311-9

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Quadro Comil #194S, Stainless Steel with beater, 5 HP, variable speed drive

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Quadro Comil #196, Screen Mill, Serial #196-0387 (30 R), #3487-2

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Quadro Comil #196S, Sanitary Stainless Steel, 10 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Quadro Comil #196S, Stainless Steel, VFD controller, 10 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Quadro Comil #197, Stainless Steel, 1 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Quadro Comil #197, Fincor controls, 2 HP, 2007

  Photo
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Quadro Comil #197, Sanitary Stainless Steel, 2 HP, 2014

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Quadro Comil #197, serial# 2A-250R05058029(6350)0409, #2599-59

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Quadro Comil #197AS, S/S, with beater, 2 hp, 230/460 volt xp variable speed motor on stand, serial# 197-0880, #3242-14

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Quadro #197S, 316 S/S particle size reduction Comil, rated up to 800 PPH, with 10"diameter x 6"deep Stainless Steel hopper

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

Quadro Comil #197S, Sanitary Stainless Steel, 1 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Quadro Comil #198S, Sanitary Stainless Steel, 20 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Quadro Comil #J, Stainless Steel, 5 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Quadro Comil #U10, mtd.in isolator,S/S,beater & screen,20 HP,230/460 V.XP,VFD ctrlr,5-glove ports,on stand,#37290

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Quadro Comil #U20, 316L Stainless Steel product contact surfaces, 250 mm diameter infeed, 295 mm diameter screen holder, 4 kw, 400 volt, #3470-8

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Quadro Comil, Stainless Steel, 10 HP, #20924

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Raymond vertical mill, 18", 20 HP, 220/440 V., 3500 RPM, 35" inside height, 19" inside diameter, (4) 11" discs, 11" fan wheel, (6 available) 3-3/4" blades

  Photo Spec Sheet
 RFQ
Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

Red Head #3P, Sand Mill, Ser.65-1634-4, 7.5 HP, 1760 RPM, 208-220/440 V.

  Photo
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Red Head #3P, Sand Mill, Ser.65-1634-4, 7.5 HP, 1760 RPM, 208-220/440 V.

  Photo
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Reduction Engineering mill, #177-7

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Reduction Engineering #75, pulverising mill, 30 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Rietz / Bepex #PB-15-K9G228 Prebreaker, stainless steel, 15"x 21"feed opening, #27007

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Schenck Process #08-606 Micronizer, jet mill/pulveriser, 8" diameter

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Schold Shot Mills, 15-50 HP (6)

  Photo Spec Sheet
 RFQ
Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dennis.crozier@tbwc.net) Dennis Crozier

Spex Industries #6875 SamplePrep Cryogenic grinder, 1 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Spex Industries #8510 Shatterbox swing mill, 1 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Sprout Waldron #DSF1512 Koppers, mill with blower, 30 HP, #SC-242

  Photo
 RFQ
Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

STM #MJS300 jet millwith air classification system, 12.75" diameter, PLC ccontrols

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Stokes #44-0 Tornado Mill, Stainless Steel, 5 HP, 3150 RPM, on portable base w/casters

  Photo
 Visit Dealer's Equipment Listings  RFQ
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Email: jim@hpequip.com) James Siegel

Stokes #900-004 Tornado mill, 6"rotor, on portable base, Stainless Steel, 5 HP, #28199

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Sturtevant #2-10 Sample grinder, Carbon Steel, 10" diameter, 2000

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

Sturtevant Micronizer, 20", Stainless Steel w/air manifold, on short stand, #28108

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Sturtevant Micronizer jet mill, 30", Stainless Steel, #174-4

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-536-3794 (Email: sales@fedequip.com) Joanne Parente

Sturtevant, mill, jet, 24", Carbon Steel, 1000 CFM (6)

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery & Equipment Co, San Francisco, CA 415-467-3400 (Email: dominic@machineryandequipment.com) Dominic Piazza

Sturtevant Micronizer jet mill, Stainless Steel, 30" diameter

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Phoenix Equipment Corp, Red Bank, NJ 844-262-9533 (Email: Jesse@phxequip.com) Jesse Spector

TAS #42B, mill, impact, Carbon Steel, 350 HP (2)

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery & Equipment Co, San Francisco, CA 415-467-3400 (Email: dominic@machineryandequipment.com) Dominic Piazza

Williams general purpose hammermill, 10 HP, 1175 RPM, 20" x 17"inlet, 24" x 27"outlet

  Photo Spec Sheet
 RFQ
Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

Worth Engr #20, high shear pin mill utilized for wiping air into product, 125 psi

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

Pin mill, 10 to 300 GPM, 316SS, 2"ID and 2.5"OD tri clamp sanitary fitting and a 2"ID and 2.5"OD dia. discharge

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

Carbon Steel mill, jet, 42", 3300 cfm, 600 HP (2)

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery & Equipment Co, San Francisco, CA 415-467-3400 (Email: dominic@machineryandequipment.com) Dominic Piazza

Back to category listings.


Photo = photo available    Spec Sheet icon = spec sheet available    PDF icon = PDF available    RFQ icon = request quote from seller    Video = video available    web site icon = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise