Browse: Machinery Electrical

Machinery & Equipment >

Brakes >

Brakes, Press, Hydraulic (Tons)

BRAKES, PRESS, HYDRAULIC (TONS) (Also See CNC Machinery & Equipment - Brakes, Press)

Westbrook Engr. buy/sell fabricating equipment

There are 493 listings in this category
Update: Fri, May 25, 2018 00:32:46

Advanced Search

Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added

Original Sort

12 Ton, Bantam #B442, press brake, 4' OA Camera icon

Machinesused.com, Minneapolis, MN 763-745-1166 (Email: sales@machinesused.com) John Lawton

12 Ton, DiAcro #18-48, hydro-mechanical press brake, 4' OA, 25" BH, 14" FOMBG, #27653 Spec Sheet

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

12 Ton, DiAcro #18-48, Hydra-Mech, adjust lower bed, lower die holder, FOBG Camera icon

Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

12 Ton, Foremost Bantam #B212, air operated, 2' OA, 24-1/2" BH, manual BG, new, #B3212 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

12 Ton, Foremost Bantam #B412, air operated, 4' OA, 48-1/4" BH, manual BG, new, #B3412 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

12 Ton, Foremost Bantam #B512, air operated, 5' OA, 60-1/4" BH, manual BG, new, #B3512 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

17 Ton, DiAcro #14-48-1, hydraulic brake, 4' OA, very good condition, 1973 Camera icon

Action Machinery Inc, Louisville, KY 502-459-1313 (Email: actionky@bellsouth.net) Thomas Cheney

17 Ton, DiAcro #14-48-2, hydro-mechanical press brake, 4' OA, 36" BH, dual speed, #27652 Spec Sheet

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

17 Ton, DiAcro #14-48-2, hyd-mech, 4' OA, 36" BH, 2-speed Camera icon

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

17 Ton, DiAcro #17T-1448, hydra-mech press brake, 4' manual back gauge

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

17 Ton, Dreis & Krump press brake, 5' OA, manual back gauge, in plant

Standard Industrial Machinery, Oxford, AL 256-831-1211 (Email: Sales@standardindl.com) Robert O'Neal

20 Ton, Allsteel #20-4, CNC hydraulic press brake, 4' OA, Comp-U-Bend 610 CNC BG, #7590 Camera icon

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

20 Ton, Allsteel, hydraulic press brake with Automec CNC99 2-Axis back gauge, 4' OA, $13, 900, Curt 320-333-6084 Camera icon

Metal Fab Machinery Inc, Cold Spring, MN 320-685-8819 (Email: curt@metalfabmachinery.net) Curt Olafson

20 Ton, Wysong & Miles #2052, press brake, 4.4' OA, 38" BH, $7, 900 Camera icon

Greasymachines.com, Bristol, CT 866-473-2796 (Email: info@greasymachines.com) Nick Perugini

20 Ton, Wysong & Miles #H2072, hydra-mech press brake, 5' OA

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

20 Ton, Wysong & Miles, hydra-mech, 6' OA, 38" BH, 6' x 16 ga., stroke length adjustment, #26826 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

24 Ton, Bantam #B224, pneumatic press brake, 24" bed, lower die holder, remote foot switch

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

24 Ton, Foremost Bantam #B224, air operated, 2' OA, 24-1/4" BH, manual BG, new, #B3224 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

24 Ton, Foremost Bantam #B424, air operated, 4' OA, 48-1/4" BH, manual BG, new, #B3424 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

24 Ton, Foremost Bantam #B624, air operated, 6' OA, 72-1/4" BH, manual BG, new, #B3624 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

25 Ton, Amada press brake, 49.3" OA, 3.94" stroke, 1986, #80651 Camera icon

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

25 Ton, DiAcro #16-72, Hydra-Power Hydro-Mechanical press brake Camera icon

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark

25 Ton, Dreis & Krump #Speedibender, 10' OA, 133" BH, 10' x 16 ga., 3-way lower die, #27402 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

27.5 Ton, Amada #RG-25, CNC brake, 4' OA, 40" BH, 2-Axis Amada NC9-EX, 2 HP, #27569 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

27.5 Ton, Amada #RG-25, Hurco Autobend 7 CNC BG, light curtains, under power, #13317 Camera icon

N S Machine Corp., Granger, IA 515-999-2999 (Email: sales@nsmachine.com) David Bryan

27.5 Ton, Promecam #RG-25, press brake, 48OA' bed, 40" BH Camera icon

Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Email: Office@faheyinc.com) Jackie Fahey

30 Ton, Accurpress #7305, hydraulic press brake, 5' OA, 6" stroke, 6" throat, 5 HP Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

30 Ton, Guang Bei, 5.3' OA, 51" BH, 5' x 14 ga., 7-way die rail, 2011, #27544 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

33 Ton, Adira #QH-3015, upacting press brake, 5' FOMBG

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

33 Ton, Adira #QH-3020, upacting press brake, 6' OA

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

33 Ton, Adira #QUA-3220, press brake, 35 ton x 6', 6-way die & punch, Euro-AM holders

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

33 Ton, Amada #SPH-30, hyd press brake, 27-1/2" OA, 15-1/2" BH, 3.94" str, 2-Axis control, #27644 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

33 Ton, Amada #SPH-30C, universal fabricator, punch/press brake combo, 15.7" OA, 3.94" length, #27595 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

33 Ton, Amada #SPH-30C, hydraulic, 4" stroke, 20.5" OH, 16.34" bending length, 2-speed, 1985, #9451 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

33 Ton, Baileigh #BP-3360NC, 5.1' OA length, 3 HP main motor, DRO, jog/manual/auto mode, '11 Camera icon

520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

35 Ton, DiAcro #14-72, 6' OA, 62" BH, 6' x 14 ga., 24" Hurco Autobend back gauge, #27229 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

35 Ton, DiAcro #14-72, hydra-power press brake, 6' OA, 62" BH, 2" stroke, 9" SH, 9" throat, 3 HP, pre-owned Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

35 Ton, DiAcro #14-72, 6' OA, hydro-mech brake, approach/bend speeds 25 IPM/6.75 IPM Camera icon

Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

35 Ton, DiAcro #14-72, press brake, 6' OA Camera icon

Machinesused.com, Minneapolis, MN 763-745-1166 (Email: sales@machinesused.com) John Lawton

35 Ton, DiAcro #14-72, 6' OA bed & ram, FOMBG, power ram adj., One Shot lube, #7793 Camera icon

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

35 Ton, DiAcro #14-72, 6' OA, FOMBG with indicators, foot treadle, s/n #JG-1197, used, #A4286 Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

35 Ton, DiAcro #14-72, hydra-mech press brake, 6' manual back gauge

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

35 Ton, DiAcro #14-72, hydra-mech press brake, 6' FOBG

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

35 Ton, DiAcro #16-96, 8' OA, 62" BH, 8' x 16 ga., electric foot switch, #27174 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

35 Ton, DiAcro #16-96, hydra-mech press brake, 8' OA

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

35 Ton, DiAcro #16-96, hydra-mech press brake, 8' OA

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

35 Ton, DiAcro #16-96, Hydra-Mech, 8' OA, single axis with Dynabend/ DRC, NC BG Camera icon

Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

35 Ton, DiAcro #16-96, hydra-mech press brake, 8' OA

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

35 Ton, DiAcro #16-96, hydra-mechanical brake press, 8' OA, FOMBG, 2 speed, power ram adj.w/indicator, #9921 Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

35 Ton, DiAcro #19-96, hydra-mechanical, 8' OA, DRC CNC BG, foot treadle, used, #A4030 Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

35 Ton, LVD #35-BH-06, hydraulic, 6' OA, pedestal control, foot pedal, light curtain, #A3592 Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

35 Ton, Piranha #35-6, hydraulic brake, 6' OA, 11.5" open height, 7.5 HP

Fabricating Machinery Corp, Duarte, CA 626-359-0024 (Email: scourneya@fabmach.com) Scott Courneya

35 Ton, Wysong & Miles #35-72, hydra-mechanical, 6' OA, serial #HPB13-180, 1985 Camera icon

Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp

38 Ton, Adira #QHA-3220, hydraulic press brake, 6' OA, 61" BH, 4" stroke, 10" throat Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

38 Ton, Amada #RG-35S, hydraulic, 49.3" OA, 40.16" BH, 14.58" OH, 3-Axis BG, upacting lower ram Camera icon

GTH Used Machinery Intl, Pico Rivera, CA 562-692-8095 (Email: gthusedmachinery@hotmail.com) Jairo Gutierrez

38 Ton, Guifil #PE15-35 CNC hydraulic press brake, 5' OA, 53" BH, 3.9" stroke, 11.8" throat Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

38.5 Ton, Guifil #PE15-35, hydraulic, 60" OA, 53" BH, 3.94" str, 12" OH, auto ga. 2-Axis, 1997 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

38 Ton, Knuth #AHK-1235, hydraulic NC press brake, 4' OA, #A5220

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

39 Ton, Komatsu #PHS35x125, hydraulic press brake, 49.2" bed, 3.93" stroke Camera icon

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

40 Ton, Pacific #40-12, hydraulic, 12' OA, light curtains, tonnage control valve, 123" BH, #9835 Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

40 Ton, Pacific #J40-6, hydraulic, 6' OA, 12 ga, 4'6" BH, 6" str, Hurco 5C BG, foot pedal, 1986 Camera icon

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn

40 Ton, Pacific #J40-6, 3-Axis Hurco AB7 BG, 6' OA, 4'6" BH, 6" SH, Hurco Autobend 7 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

40 Ton, Premier #540-R, 60" OA, 49" BH, 6" str, 3-Axis Hurco 7, R-Axis, 2000, #10265 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

40 Ton, Wysong & Miles #H-4072, Hydra-Mechanical press brake, 6' OA bed, 2.5" stroke, 5 HP, 1994 Camera icon

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

40 Ton, Wysong & Miles #H-4072, Hydro-Mech. 6' OA, 5'2" BH, Auto Gauge 24 BG, 1989 Camera icon

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

40 Ton, Wysong & Miles #H-4072, 6' OA, hydra-mech, 62" BH, 2.5" str, 3" adj, 8.5" throat, '90, #153742 Camera icon

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

40 Ton, Wysong & Miles #H-4906, hydro-mech, 8' OA, 62" BH, 2.5" str, 8.5" thrt, 1-Axis PBG, '80, hb20057 Camera icon

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury

42 Ton, Baileigh #BP-3142NC, hydraulic, 2.7' OA, 6.75" throat, 19.5" BG, 3000 psi, 2 HP, new, #SMBP13142NC Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

44 Ton, Ermak #Micro-Bend-1000-40, 3-Axis press brake, hydraulic, 2015 Camera icon

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

44 Ton, Ermak #Power-Bend-Pro-Seater, CNC press brake, 4.2' OA, new Camera icon

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

44 Ton, U.S. Industrial, hydraulic brake press, 6' OA, 2-axis CNC, tooling included, low cost (David)

Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams

44 Ton, U.S. Industrial, hydraulic, 6' OA, 2-Axis CNC, tooling, light curtain, refurbished, 2006

Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams

45 Ton, Atlantic #HDE45-5, 5' OA, hydraulic, 43" BH, tonnage indicator, 5.5 HP, used, #A2005

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

45 Ton, Heim #45-6, press brake, 6.3' OA, 62" BH, 2" stroke, 12" SH, A/C, 40 SPM, 5 HP, #68994 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim #45-6, press brake, 8' OA, 78" BH, 3" stroke, 12" SH, air clutch, 5 HP, #68991 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim #45-6, press brake, 8' OA, 78" BH, 3" stroke, 12" SH, air clutch, 5 HP, #68993 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim #45-6MA, 6' OA, 62" BH, 3" stroke, 12" SH, air clutch, 5 HP, 40 SPM, #69035 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim #45-6MA, 6' OA, 62" BH, 2" stroke, 12" SH, air clutch, 5 HP, 40 SPM, #69038 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim #45-6MA, 6' OA, 62" BH, 3" stroke, 12" SH, air clutch, 5 HP, 40 SPM, #69036 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim #45-6MA, press brake, 6' OA, 62" BH, 2" stroke, 5 HP, air clutch, #69033 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim #45-8, press brake, 6' OA, 62" BH, 3" stroke, 12" SH, air clutch, 5 HP, #68986 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim #45-8, press brake, 8' OA, 78" BH, 2" stroke, 5 HP, air clutch, #68989 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim #45-8, press brake, 8' OA, 78" BH, 2" stroke, 12" SH, air clutch, 5 HP, #68984 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim #45-8, press brake, 8' OA, 78" BH, 2" stroke, 12" SH, air clutch, 5 HP, #68977 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim #45-8, press brake, 8' OA, 78" BH, 2" stroke, 12" SH, air clutch, 5 HP, #68976 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim #45-8, press brake, 8' OA, 78" BH, 2" stroke, 12" SH, air clutch, 5 HP, #68978 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim #45-8, press brake, 8' OA, 78" BH, 2" stroke, 12" SH, air clutch, 5 HP, #68981 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim #45-8, press brake, 8' OA, 78" BH, 2" stroke, 12" SH, air clutch, 5 HP, #68982 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton, Heim, press brake, 8' OA, #68990 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

45 Ton Atlantic #HDE45-5, 5' OA, 43" BH, 11.6" DL, 7.6" SH, tonnage indicator, #A2006 Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

50 Ton, Accurpress #7506, 6' OA, 52" BH, 10 HP, 6" stroke, 8" throat, 1983, GP-20826 Camera icon

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury

50 Ton, Amada #RG-50, press brake, 82.1" OA, 3.94" stroke, 1985, #80652 Camera icon

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

50 Ton, Amada #RG-5020LD, 6.10' OA, LD2 control, 1999 Camera icon

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark

50 Ton, Betenbender #4-50, 4' OA, 30-1/2" BH, 6" ram stroke, 1996, #4377

Standard Industrial Machinery, Oxford, AL 256-831-1211 (Email: Sales@standardindl.com) Robert O'Neal

50 Ton, Betenbender, hydraulic press brake, 8' OA, 88" BH, 8" str, 10" SH, 20 HP, 1998, #64459 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

50 Ton, Betenbender, Press Brake, 6' OA Camera icon

HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn

50 Ton, Standard hydraulic press brake, 8' OA, 78" BH, operator pedalstal w/palm buttons

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

55 Ton, Amada #5020, 6.7' OA, 66.5" BH, Operator 2-Axis CNC, light curtains, 1995, #23101 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

55 Ton, Amada #RG50, hydraulic press brake, 6' OA, 1995, #3061 Camera icon

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Email: debbie@kaste.com) Brad

55 Ton, Amada #RG50, up-acting, NC9EX-II 3-Axis CNC, 82" OA, 59" BH, 3.9" SR, '95, #28545 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

55 Ton, Amada #RG50, CNC hydraulic press brake, NC9-EX CNC control, 3.94" stroke, 1986 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

55 Ton, Darley #EHP50-20/15, 80' OA, palm station, curtains, loads of tlng, '84, #43218 Camera icon

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

55 Ton, DiAcro #55-8, hydra-mechanical press brake, 8' OA, 80" BH, 12" SH, 4" ram adj., 3" stroke, foot pedal, dual palm buttons, #13184J Camera icon

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

55 Ton, DiAcro #55-8, hydra-mechanical, serial #655117884, 8' x 12 ga.mild steel Camera icon

HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

55 Ton, Niagara #HB-55-4-6, 2-Axis CNC brake, 6' OA, 54" BH, 6" stroke, Zakron Comp-U-Bend 61000 2-Axis CNC BG, #27675 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

55 Ton, Niagara #HB-55-4-6, hydraulic press brake, 6' OA, s/n 52643, 1988 Camera icon

Zedco Machinery Inc, Rochester, NY 585-458-6920 (Email: productionmetal@rochester.rr.com) Leo Glogowski

55 Ton, Niagara #IB-36-5-6, press brake, 6' OA, 62" BH, 2.5" stroke, 6" throat, 1980 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

55 Ton, Pacific #J55-6, 6' OA, 4'6" BH, 6' x 10 ga., Automec CNC 1000 back gauge, #27369 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

55 Ton, Pacific #J55-6, hydraulic press brake, 6' OA, s/n 8735, 1979 Camera icon

Zedco Machinery Inc, Rochester, NY 585-458-6920 (Email: productionmetal@rochester.rr.com) Leo Glogowski

55 Ton, Pacific #J55-8, CNC brake, 8' oa, 6'6" BH, 24" 2-Axis CNC 150 Autogage, 6" stroke, 12.5 HP, foot switch, #27750 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

55 Ton, Pacific #J55-8, hydraulic, 8' OA, 78" BH, 8' x 12 ga., 20-50 SPM, #26841 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

55 Ton, Wysong & Miles #55-8, hydraulic, 10' OA bending length, 10' x 14 ga., 2-1/2" stroke, 1983 Camera icon

Sanson Machinery Group, Kirkland, WA 425-513-8263 (Email: aduenas@sansonmachinery.com) Ryan Ross

56 Ton, Toyokoki #APB5613W, Electro Servo, 4.3' OA, 37" BH, 9.25" open height, 1993 Camera icon

Sanson Machinery Group, Kirkland, WA 425-513-8263 (Email: aduenas@sansonmachinery.com) Ryan Ross

60 Ton, Accurpress #7606, hydraulic, 6' OA, 52" BH Camera icon

Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Email: Office@faheyinc.com) Jackie Fahey

60 Ton, Accurpress #7606, 6' OA, 52" BH, 2-Axis, prog. ETS-200P, adj.spd, Frame arms, '02 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

60 Ton, Accurpress #7606, press brake, 6' OA, ETS 1000 ram controller & manual BG w/DRO Camera icon

Southern Fabricating Machinery Sales, Riverview, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

60 Ton, Accurpress #7606, ETS3000 control, CNC X-Axis BG & manual R-Axis, 6' OA, 2000

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

60 Ton, Accurpress #7606, 6' OA, hydraulic press brake, 230 V., ETS pedestal control, '99 Camera icon

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

60 Ton, Accurpress #7608, hydraulic, 8' OA, 76" BH, 8" stroke, Automec 2-Axis CNC, 1999, #10094 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

60 Ton, Accurpress #7608, hydraulic, 8' OA, 76" BH, 8" stroke, Automec CNC gauge, '99, #10095 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

60 Ton, Accurpress #7608, 2-Axis CNC brake, 8' OA, 78" BH, 8" stroke, 8" throat, 10 HP, 24" Accurpress 2-Axis BG, #27749 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

60 Ton, Accurpress #7608, press brake with CNC control, 8' OA, #12609 Camera icon

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

60 Ton, Accurpress #760112, 12' OA 124" BH, AP2 CNC BG, remote foot & hand station, '92 Camera icon

Centra Corporation, Perry Hall, MD 443-317-8414 (Email: ed@centracorp.com) Ed/Mike/Thomas

60 Ton, Atlantic, 5' OA, 43" BH, 5' x 3/16", Robosoft 2-Axis back gauge, #26752 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

60 Ton, Cincinnati #60CB2, hydraulic, 6' OA, 4'6" BH, 9" SH, 10" thr, light curt., foot control, #83162

Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith

60 Ton, Cincinnati #60CBII, 6' OA, 48" BH, 1998 Camera icon

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark

60 Ton, Cincinnati #60CBII4, CNC, hydraulic, 6' OA length, 8" stroke, 9" closed hgt, 24" CNC BG, 1999 Camera icon

HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

60 Ton, Cincinnati #60CBIIx4, 6' OA, Proform 3 Axis CNC, lite curtain, 1999, #7669 Camera icon

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

60 Ton, Cincinnati, hydraulic press brake, 6' OA, serial #50487 Camera icon

Zedco Machinery Inc, Rochester, NY 585-458-6920 (Email: productionmetal@rochester.rr.com) Leo Glogowski

60 Ton, Durma #HAP2560, 8' OA, hydraulic press brake, 5.3" stroke, 2-Axis BG, CNC, 2004 Camera icon

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

60 Ton, Niagara #IB60-4-6, hydraulic, 6' OA, 54" BH, 0-6" stroke, 12" SH, Autobend IV BG control

Cities Advanced Machinery, Eden Prairie, MN 952-944-6060 (Email: harry@cam-cnc.com) Harry Youtsos

60 Ton, Wysong & Miles #H-96, hydraulic, 8' OA, 6'6" BH, 12 ga x 8' bending cap, 9" die space, 1993, S35706 Camera icon

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

60 Ton, Wysong & Miles #H60-72, hydra-mech., 6' OA, SDI curtains, 1992, #6716P Camera icon

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

60 Ton, Wysong & Miles #H60-120, hydra-mech, 10' OA bed, SDI curtains, 1992, #6715P Camera icon

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

60 Ton, Wysong & Miles #MTH60-72, hydraulic, 6' OA, 62" BH, manual BG, 6" str, 15" open, 6" thrt, '92, #10266 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

60 Ton, Wysong & Miles #THS60-96, hydraulic press brake, 8' OA, 78" BH, 7-1/2 HP, 1999, #64455 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

65 Ton, Allsteel #65-8, hydraulic, 10' OA, 8" BH, 2' horn, 8" throat, 10 HP, 3/60, 600 V. Camera icon

Industrial Machinery Exchange, Cambridge, ON 519-622-8353 (Email: Pgeddes@machexch.com) Paul Geddes

65 Ton, Piranha #65-8, press brake, 8' OA bed, 2005 Camera icon

Prime Machinery Inc, Huntington, NY 516-922-7977 (Email: sales@primemach.com) Steve Brenner

66 Ton, Durma #AD-R-2060, 6.9' OA bed, CNC, Delem control, 2012

WI Equipment Corp, Bay Shore, NY 631-666-6642 (Email: Metals@wieqcorp.com) Steven Bankin

66 Ton, Durma #ADR2060, 6.9' OA, 66" BC, 1-Axis BG, Delem DA-52 CNC control, 2012, #27965 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

66 Ton, Durma (Prime Line) #HAP2560, 8.4' OA length, 84" btwn col, 8" thrt, 4-way die, #016302 Camera icon

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

66 Ton, Durma #HAP2560, hydraulic press brake, Cybelec back gauge, 8.4' OA, 84" BH, 5.3" stroke, 2005, #27674 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

66 Ton, Guifil #PE20-60, hydraulic, 6.8' OA, 11 ga., 60" BH, 4" str., 16" throat, 6.4 HP, 1988, #25014 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

66 Ton, Guifil #PE20-60, 6.8' OA bed length, 4" stroke, Automech 2-Axis CNC, 1996, #28293 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

66 Ton, Guifil #PE20-63, hydraulic, 6' OA, 20" throat, Automec 1000 CNC controller, 1993 Camera icon

R & J Machinery Sales, Milford, MI 248-685-7879 (Email: sales@rjmachinerysales.com) Jeff Bruce

66 Ton, Guifil up-act. hydraulic brake, 8'4" BL, 6'8" HL, 4" str, Automec CNC 1000 sgl Axis CNC Camera icon

Federal Equipment Div, Ronkonkoma, NY 631-467-9400 (Email: sales@federalequip.com) Ron Shuster

67 Ton, Baykal #2401x60, EC4 4-Axis CNC, 2-Axis BG, 6.11' OA, 62" BH, 8.27" str., 2009, #28531 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

70 Ton, Adira #QHA6320, 6.8' OA, 61" BH, Cybelic DNC-800 5-Axis CNC, 4-Axis BG, '97, #26936 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

70 Ton, Allsteel #70-8, hydraulic, 8' OA, 6'6" BH, 1985 Camera icon

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

70 Ton, Baykal #APH2604x70, hyd press brake, 8.5' OA, 80-5/8" BH, 24" BG, 2002, #14224 Camera icon

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

70 Ton, Betenbender #6-70, hydraulic, 6' OA, 8" throat, 2-speed Ram tilt micrometer, BG, 10 HP, new, #SM670 Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

70 Ton, Guifil #PE25-63, hydraulic, 8' OA, programmable back gauge Camera icon

S D Cohen Machinery Ltd, Dundas, ON 905-921-2001 (Email: jonathan@cohenmachinery.com) Jonathan Riley

70 Ton, Guifil #PE25-63, Up-Acting Hyd Press Brake, Autogauge CNC 1000 Backgauge Camera icon

TNT Industrial, Long Beach, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

70 Ton, Hydrapower #HM-07008, 8' x 11 ga.bending, 78" BH, 6" throat, 10 HP, #016138 Camera icon

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

70 Ton, Pacific #70-146/12, hydraulic brake, 14.6' OA, 168" BH, 7" stroke, 12.5 HP, #61682 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

72 Ton, Trumpf #3066, CNC press brake, 6.10' OA, 92" BH Camera icon

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

75 Ton, DiAcro #75-8, hydra-mechanical press brake, 8.4' OA, 80" BH, 3" stroke, 4" ram adjustment, 34" SPM, 10 HP, #27764 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

75 Ton, DiAcro #75-10, hydra-mechanical press brake, 10' OA, 102" BH, 12" SH, 4" ram adj., 3" stroke, 8" throat, #13183J Camera icon

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

75 Ton, DiAcro #75-10, Hydra-Mechanical, s/n #JJ-1194, 10' x 12 ga.mild steel, #1322E Camera icon

HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

75 Ton, Pacific #J75-8, CNC hydraulic press brake, 8' OA, 6'6" BH, 6" throat, 15 HP Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

75 Ton, Pacific #J75-8, 8' OA, 6'6-1/2" BH, dual palm buttons, hydraulic, Hurco BG, s/n #A566

Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

75 Ton, Pacific #J75-10, 10' OA, 7" str, Hurco IV CNC BG, palm button & foot switch, 1976 Camera icon

North American Machy Sales, Philadelphia, PA 215-332-3200 (Email: sales@northamericanmachinery.net) Hyman/Putney

80 Ton, Amada #RG-80, press brake, 98.7" OA, 3.94" stroke, 1996, #80653 Camera icon

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

80 Ton, Komatsu #P75x3100, hydraulic press brake, 10.2' OA, 8'6" BH, 13.94" DL, 1982, #67288 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

80 Ton, LVD Strippit #PPS80/25, 3-Axis CNC back gage, 2009 Camera icon

Prime Machinery Inc, Huntington, NY 516-922-7977 (Email: sales@primemach.com) Steve Brenner

88 Ton, Amada #FBD8025E, 8.2' OA, 86" BH, NC9-EXII, upper tool clamps, ft switch, '95, #28587 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

88 Ton, Amada #FBD8025E, 8.2' OA, 86" BH, NC9-EXII, upper tool clamps, 1993, #28586 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

88 Ton, Amada #FBD88020E, hydraulic, 6.6' OA, 66.9" BH, NC9EXII control, 3-Axis BG, 1989, #18416 Camera icon

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher

88 Ton, Amada #HFB8025, 8.4' OA, 83" BH, 16.5" thrt, 7.8" str, 4-Axis, Operateur CNC, '98, #28540 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

88 Ton, Amada #RG-80, CNC press brake, 8.2' OA, 86" BH, 1998 Camera icon

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

88 Ton, Amada #RG-80S, CNC Press Brake, 6.10' OA, 59.84" BH, 1981 Camera icon

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

90 Ton, Cincinnati #90AFX6, AutoForm, 8' OA length, 6'6" BH, 1989

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Email: bjmc2@aol.com) Brian Johnston

90 Ton, Cincinnati #90AS8, hydraulic, 10' OA, 8'5" BH, 8" stroke, CNC BG, palm buttons, #81193 Camera icon

Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith

90 Ton, Cincinnati #90AS8, 10' OA, 2-Axis Autoform gauge, $24, 900, Curt 320-333-6084 Camera icon

Metal Fab Machinery Inc, Cold Spring, MN 320-685-8819 (Email: curt@metalfabmachinery.net) Curt Olafson

90 Ton, Cincinnati #90CB, CNC press brake, 12' OA, 8'6-3/4" BH, 8" stroke, 7" throat Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

90 Ton, Cincinnati #90CB8, 10' OA, 102" BH, 8" stroke, 7" throat, hydraulic brake press, 1996

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

90 Ton, Cincinnati #90CB10, hydraulic press brake, 12' OA, Hurco Autobend 7 control & BG Camera icon

Southern Fabricating Machinery Sales, Riverview, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

90 Ton, Cincinnati #90CBx6FT, 8' OA, 78" BH, 8" str., 7" thr., Hurco Autobend 7, #28820 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

90 Ton, Cincinnati #90CBx6FT, 8' OA, 78" BH, 7" thrt, 8" str, 7" SH, Hurco CNC control, '95, #22181 Camera icon

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Email: markm@charlestonannex.com) Mark Mannion

90 Ton, Cincinnati #90FMIIx6, hydraulic press brake, 8' OA, 6'6" BH, 8" stroke, 1989, #69978 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

90 Ton, Cincinnati #90FMIIx6, 2-Axis CNC, 8' OA, 78.5" BH, 14" str, 120 IPM, 1992, #26069 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

90 Ton, Cincinnati #Autoform-90AFx8, hydraulic press brake, 10' OA, 8'6" BH, 1993, #66523 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

90 Ton, Cincinnati #Autoshape, CNC forming center, 8' OA, 6'6-3/4" BH, 8" stroke, 7" throat (2 available) Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

90 Ton, Cincinnati #FMII, hydraulic, 12' OA, 10'6" BH, CNC gauge, autocrown, 1995 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

90 Ton, Cincinnati #Formaster-FM90, hydraulic brake, 10' OA, 8'6" BH, 8" stroke, 1984, #56481 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

90 Ton, Cincinnati press brake, 8' OA Camera icon

GTH Used Machinery Intl, Pico Rivera, CA 562-692-8095 (Email: gthusedmachinery@hotmail.com) Jairo Gutierrez

90 Ton, Dreis & Krump press brake, 6' OA, 56" BH, 3" stroke, 7" SH, 8" throat, #69799 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

90 Ton, HTC, 10' OA, hydraulic, press brake Camera icon

Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith

90 Ton, LVD #PP90-BH-12, hydraulic, 12.2' OA, 10'6" BH, Automec 24" BG, dual button, #81319 Camera icon

Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith

90 Ton, LVD #PPEB-08, hydraulic, 8.2' OA, 80" BH 4-Axis gauge, Y1 Y2, LVD Cadman control, 1999 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

90 Ton, Masterfab #FAB90-08, hydraulic press brake, 8' OA Camera icon

Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

90 Ton, Masterfab #FAB90-08, 8.2' OA bend.lgth, 80" BH, 6" str, 10" thrt, 14" OH, #016094 Camera icon

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

90 Ton, Pacific #J90, 8' OA, 6'6" BH, Automech 2-Axis CNC 1000, 1990, #28721 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

90 Ton, Pacific #J90, hydraulic, 12' OA bed, 10'6" BH, Hurco Autobend 7 BG, 6" stroke, 1975 Camera icon

Centra Corporation, Perry Hall, MD 443-317-8414 (Email: ed@centracorp.com) Ed/Mike/Thomas

93 Ton, Toyokoki #HYB-8525, CNC press brake, 8.2' OA, 81" BH, 2000 Camera icon

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

95 Ton, Betenbender #12-95T, hydraulic, 12' OA, 20 HP, die block, electric controls, flush mount Camera icon

Holland Machinery Company Inc, Miami, FL 305-635-2325 (Email: sales@hollandmachinery.net) Sales

95 Ton, Piranha #9510, hydraulic press brake, 10' OA, 102" BH, 6" stroke, 2000, #26858 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

95 Ton, Trumpf Trumabend #V85, 7-Axis, 6.9' OA, 69" BH, 1996 Camera icon

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark

95 Ton, Trumpf #V85S, 8.4' OA, 89" BH, 4-Axis BG, crowning, clamping, 2001, #28724 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

95 Ton, Trumpf TrumaBend #V85S, press brake, 8.4' OA, 12333 Camera icon

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

100 Ton, Accurpress #71008, hydraulic press brake, 8' OA, 76" BH, 8" stroke, 10" throat, 6" SH, 40" BG, 10 HP, pre-owned Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

100 Ton, Accurpress #71008, 8' OA, 76" BH, 8" stroke, AP2 CNC BG, 1986, #6758

A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Email: sales@ammetalmaq.com) Sales Dept.

100 Ton, Accurpress #710012, 12' OA, 124" BH, AP2 CNC BG, light curtain, 1995 Camera icon

Centra Corporation, Perry Hall, MD 443-317-8414 (Email: ed@centracorp.com) Ed/Mike/Thomas

100 Ton, Accurpress #710012, 12' OA, 126" BH, 8" stroke, 10" throat, 10 HP, flush floor, #28541 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

100 Ton, Accurpress #710128, hydraulic press brake, 12' OA, 124" BH, 8" stroke, 10" throat, 6" SH, ETS 3000 CNC, 10 HP, pre-owned Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

100 Ton, Accurpress, 8' OA, 6'6" BH, Accurpress CNC, 8' lower die holder, #27830 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

100 Ton, Amada #RG-100, press brake, 102.4" OA, 3.94" stroke, 1986, #80654 Camera icon

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

100 Ton, Amada #RG-100S, up-act, 8.6' OA, 3.94" str, 80.8" BH, Dynabend control, '82, JV-20649TK Camera icon

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury

100 Ton, Amada #RG-100S, up-acting hydraulic press brake, Dynabend 3 control, 8.6' OA Camera icon

Brewster Machinery Sales, Bethel, CT 203-441-4655 (Email: kevin@brewstermachinery.com) Kevin Brewster

100 Ton, Heller, 12' OA, 121" BH, 12' x 11 ga., stroke length adjustment, #27361 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

100 Ton, Niagara #HBM-100-8-10, 7" str, 10' bed, Autogauge CNC 1000 BG, 1994, #7175 Camera icon

Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

100 Ton, Niagara #HBM-100-12-14, 2-Axis CNC brake, 14' OA, 12'6" BH, 24" 2-Axis Hurco Autobend 7 CNC, 7" stroke, 8" throat, 20 HP, #27774 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

100 Ton, Pacific #K100-6, hydraulic press brake with single axis CNC, 6' OA, 52" BH, Hurco Autobend 7, 10" stroke, 6" throat, #27772 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

100 Ton, Wysong & Miles #F80-100-96, 8' OA, 6'-6" BH, 8" stroke, 9" adj, 6-Axis, hydraulic press brake Camera icon

SMF & Machine Tools Inc, Little Rock, AR 800-643-5839 (Email: sales@smfmachinetools.com) Roger Huntsman

100 Ton, Wysong & Miles #MTH100-120, hydraulic press brake, 10' OA, 8" str, 96" BH, 10 HP, '96, #66116 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

100 Ton, Wysong & Miles #MTH100-120, 10' OA, Automec CNC BG, s/n #MTH7-120, 1993, #154824 Camera icon

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

100 Ton, Wysong & Miles #THS100-144, hydraulic, 12' OA, 8" stroke, 7" throat, 9" adjustment, 10 HP, One Shot lube system, #13567J Camera icon

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

100 Ton, Wysong & Miles #THS100-144, hydraulic press brake, 12' OA, 126-1/2" BH, 10 HP, #64990 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

100 Ton, Wysong & Miles #THS100-72, press brake, 6' OA, #12124 Camera icon

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

110 Ton, Amada #HFB1003, 8-Axis CNC press brake, 6-Axis BG, 10' OA, Operateur control, 1997 Camera icon

Southern Fabricating Machinery Sales, Riverview, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

110 Ton, Amada #HFB1003, CNC press brake, 10.2' OA, 7.8" stroke Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

110 Ton, Amada #HFB1003, Operateur 8-Axis CNC, 10.2' OA, 106" BH, 7.8" str, 1998, #28504 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

110 Ton, Amada #RG100, 10' OA, hydraulic, up-acting, 2-Axis Hurco Autobend IV, 1982 Camera icon

Michael Fine Machinery Co., Livingston, NJ 973-992-5961 (Email: Mcfmach@aol.com) Michael/ Dave

110 Ton, Bystronic Beyeler #PR6, 10' OA, Cybelec DNC 1200 6-Axis, 4-Axis BG, #27456 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

110 Ton, Gasparini CNC hydraulic brake, 10' OA, 102" BH, 7.8" str, 11.25" SH, Delam 65 control, '97 Camera icon

HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

110 Ton, Guifil #PE30-100, hydraulic, upact, Autogauge CNC 1000 BG, 10' OA, 100" BH, 4" str, #1942 Camera icon

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

110 Ton, Guifil #PE30-100, 10' OA, 3.94" stroke, Autogage CNC1000 BG, 1993 Camera icon

Abbott Machine Co, Alton, IL 800-262-6478 (Email: mike@abbottmachineco.com) Mike St.Peters

110 Ton, LVD #110-JS-13, 13' OA, 124" BH, 4" ram adj., press brake, 1990 Camera icon

SMF & Machine Tools Inc, Little Rock, AR 800-643-5839 (Email: sales@smfmachinetools.com) Roger Huntsman

110 Ton, Pacific #J110, hydraulic, 20' OA, 18'6" BH, 7" thrt, Automec CNC 150 BG, ram clamps, 1982 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

110 Ton, Pexto #110BH08, hydraulic, 8.2' OA, 80" BH, 6" str., 13-3/4" open ht, 7-3/4" bed, '72, #65553 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

110 Ton, Promecam #RG103, 10' OA, 102.5" BH, #1922 Camera icon

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

110 Ton, Pullmax #Optima, hydraulic, 10' OA, Cybelec DNC 900 CNC control, Y1, Y2, 6-Axis gauge, 1999 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

110 Ton, Trumpf Trumabend #C110, CNC hydraulic press brake, 10' OA, 105.96" BH, 7.87" stroke Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

120 Ton, Allsteel #120-12, hydraulic press brake, 12' OA, 10'6" BH, 0-8" stroke, 20 HP Camera icon

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

120 Ton, Atlantic #HDE120/10, programmable, 10.2' OA, 102" BH, prog.BG, excellent Camera icon

Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Email: paequip@zoominternet.net) Thomas Noone

120 Ton, Betenbender #14-120, 14' OA, hydraulic, 3-speed Ram, depth stop w/DRO, 20 HP, new, #SM14120 Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

120 Ton, LVD #PPEB120/10, Cadman 8-Axis CNC, 12.5' OA, 102" BH, 5-Axis BG, 2001, #28267 Spec Sheet

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

120 Ton, Premier #10120R, 10' OA, 100" BH, 20HP, Hurco Autobend 7 CNC BG, '99, GP-20825 Camera icon

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury

120 Ton, Standard #AB12010, 10' OA, 101" BH, 6" str, 6" thr, Automec 2-Axis CNC, '95, #28814 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

121 Ton, Ermaksan #Evo-II Hybrid, CNC press brake, 10.2' OA, new, 2017 Camera icon

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

125 Ton, U.S. Industrial, hydraulic, 10' OA, 2-Axis CNC, tooling included, low cost, new (David) Camera icon

Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams

130 Ton, Accurpress #7130, 10' OA, 100" BH, 10' x 3/16", free standing control, #27490 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

135 Ton, Atlantic #HD13514-13, 14' OA, 12'6" BH, 9.8" throat, 15 HP, 1985 Camera icon

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

135 Ton, Baykal #3106x120, EC4 4-Axis CNC, 2-Axis BG, 10.2' OA, 100" BH, 10" str, '09, #28532 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

135 Ton, Cincinnati #5, Brake Press, 144" Width, Footswitch, Hurco Autobend Iv Digital Control Camera icon

HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn

135 Ton, Cincinnati #135-AF-10, 5-Axis CNC, 12' OA, 10'6" BH, 8" str, 25 HP, 1991, TK-20755 Camera icon

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury

135 Ton, Cincinnati #135AFx8, hyd press brake, 10' OA, 102-1/4" BH, 8" stroke, 1992, #70134 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

135 Ton, Cincinnati #135AS8, 10' OA, 8'6" BH, 25 HP, 250 IPM, 8" stroke, S37998 Camera icon

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

135 Ton, Cincinnati #135CB x 8FT CNC brake, 10' OA, 102" BH, 7" thrt, 8" str, 7" SH, 1989, #22180 Camera icon

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Email: markm@charlestonannex.com) Mark Mannion

135 Ton, Cincinnati #135CB, CNC press brake, 10' OA, 8'6-3/4" BH, 8" stroke, 7" throat (3 available) Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

135 Ton, Cincinnati #135CB, press brake, 10' OA, 8'6-3/4" BH, 8" stroke, 7" throat, 25 HP, foot switch, palm button station, pre-owned Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

135 Ton, Cincinnati #135CB, hyd press brake, 10' OA, 8'6-3/4" BH, 8" stroke, 7" throat, 25 HP Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

135 Ton, Cincinnati #135CB-8, hydraulic, 8'6" BH, 10' OA, 8" str, die holder, tonnage control, '75 Camera icon

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.

135 Ton, Cincinnati #135CB8, hyd press brake, 12' OA, Hurco Autobend 7 CNC control & BG Spec Sheet

Southern Fabricating Machinery Sales, Riverview, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

135 Ton, Cincinnati #135CBx8, hydraulic press brake, 10' OA, 102" BH, 8" stroke, 1980, #69742 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

135 Ton, Cincinnati #135CBx8FT, 10' OA, 102" BH, 7" throat, ram tilt, adj ram stroke, #28821 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

135 Ton, Cincinnati #135CBx10, hydraulic press brake, 12' OA, 10'6" BH, 8" str, 1980, #70126 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

135 Ton, Cincinnati #135FMX6FT, 8' OA, 6'6" BH, 2-Axis CNC, 8" stroke, 6-3/4" thrt, #27670 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

135 Ton, Cincinnati #135FMx8 Formaster press brake, 10' OA, #13057 Camera icon

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

135 Ton, Cincinnati #135FMx8 Formaster CNC press brake, 10' OA, #13056 Camera icon

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

135 Ton, Cincinnati #Autoform, 12' OA, CNC BG, autocrown, power clamp, new PC control, light curt Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

135 Ton, Cincinnati #FM6, 8' OA, FormMaster control, good condition Camera icon

Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

135 Ton, Cincinnati, hydraulic, 10' OA, Hurco BG, dies, 1984

Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess

138 Ton, Amada Astro #100MH, robotic bending cell, 2000, #21219 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

138 Ton, Amada #FBD1253, hydraulic Press Brake, Back Gauge, Footswitch, 14.8 HP Camera icon

HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn

138 Ton, Amada #FBD1253E, 10.2' OA, 106" btwn uprights, 15.75" thrt, NC9-EX II 3-Axis BG, '89 Camera icon

Fabricating & Production Mchy, Spencer, MA 508-885-9973 (Email: machines@fpminc.com) Thomas Lowkes

138 Ton, Amada #HFB0125, 13'11" OA, Operatuer 8-Axis gauge, tool holders, 1997 Camera icon

Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Email: How@tznet.com) Fred Parker

138 Ton, Amada #HFB1253, hydraulic press brake, 10.2' OA, 106" BH, 1997, #10327 Camera icon

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

138 Ton, Amada #HFB1253, CNC press brake, hydraulic, 8-Axis CNC control, 7.8" str, 16.5" thrt, 1996 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

138 Ton, Amada #HFBO125-30, CNC hydraulic, 8-Axis, Lazersafe laser beams, floating bed Camera icon

Westway Machinery Ltd, Mississauga, ON 905-803-9999 (Email: sales@westwaymachinery.com) Sales Dept.

138 Ton, Finn-Power #B125-3060, Delem DA69W 8-Axis CNC, 10' OA, 6-Axis BG, 2005, #28456 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

138 Ton, Toyokoki #HYB-125, 9.10' OA, 100" BH, Toyokoki 1254 8-Axis, 5-Ax.BG, '01, #23304 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

138 Ton, Toyokoki #HYB-125, hydraulic, CNC, 10' BL, 100" HL, 7.88" str, 16.15" TD, .00394-.520 IPS Camera icon

Federal Equipment Div, Ronkonkoma, NY 631-467-9400 (Email: sales@federalequip.com) Ron Shuster

140 Ton, Pacific #J-I-14-10, hydraulic, CNC control, 10' OA, specific manual crowning sys, 8" str, tooling Camera icon

Revolution Machine Tools Inc, North Salt Lake, UT 385-321-3934 (Email: kyle@rmtus.com) Kyle Jorgenson

140 Ton, Wysong & Miles #MTH140-168, 14' OA, hydraulic press brake, 2000 Video icon

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark

143 Ton, Amada #HFT1303, hydraulic, 10' OA, 106" BH, 7.87" str, 16.5" thrt, 4-Axis BG, pendant control Camera icon

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.

144 Ton, Trumpf Trumabend #V130, hydraulic press brake, 10' OA, 106" BH, 1997, #10326 Camera icon

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

144 Ton, Trumpf #V130, hydraulic press brake, 10' OA, 106" BH, 8.5" stroke, 16" throat (2 available) Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

146 Ton, Amada #HG1303, 11-Axis CNC hydraulic press brake, 2017 Camera icon

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner

148 Ton, LVD #150/10MNC-85, 10' OA, hydraulic, 100" BH, 7.8" str, 9.8" thr, MNC85 3-Axis CNC, '93 Camera icon

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.

149 Ton, Ermak #Speed-Bend CNC press brake, 10.17' OA, new, 2018 Camera icon

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

150 Ton, Amada #FBD-1504, hydraulic, 13.5' OA, 129" BH, 5.9" stroke, NC9EXII CNC BG Camera icon

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark

150 Ton, Atlantic #HDE150-14, hydraulic, 16' OA, 12' BH, 9.8" gap, 12.8" DL, 4.7" Ram stroke, 15 HP, s/n #57891, 1995, #29939 Camera icon

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

150 Ton, Cincinnati #150H, hydraulic, 12' OA, 10'6" BH, 10' x 3/16", #26816 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

150 Ton, HMC Hydraulic Press Brake, 18' OA, serial #3097, $29, 900 Call Curt 320-333-6084 Camera icon

Metal Fab Machinery Inc, Cold Spring, MN 320-685-8819 (Email: curt@metalfabmachinery.net) Curt Olafson

150 Ton, HTC #154-G-20, hydraulic press brake, 20' OA, back gauge, manual depth stop, electric foot pedal, used, #C5102

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

150 Ton, LVD #150/10PPE, hydraulic, 10' OA, 6-Axis, CNC BG, 1997 Camera icon

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

150 Ton, LVD #150JS10, hydraulic press brake, 10' OA, 100" BH, 5.1" stroke, 1989, #67999 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

150 Ton, LVD #PPEC-5, hydraulic, 12' OA, 102" BH, Cadman Lite control, 2010 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

150 Ton, LVD, CNC hydraulic press brake, 10' OA, 102" BH, 1997 Camera icon

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

150 Ton, Pacific #150-10, hydraulic, 10' OA, 8'4" BH, 10' x 3/16", stroke length adjustment, #27276 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

150 Ton, Pacific #150-12, 12' OA, 10'4" BH, 10' x 3/16", stroke length adj, #27609 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

150 Ton, Pacific #K-150-14, heavy duty hydraulic press brake, 14' OA, 38" deep throat, Micro Switch stroke depth control, #A2981 Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

150 Ton, Standard Industrial #AB150-16, 16' OA, hydraulic, 2002 Camera icon

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

150 Ton, Wisconsin #JX10, 10' OA, 101" BH, hydraulic, #27195 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

155 Ton, U.S. Industrial #US15512, hydraulic brake, 12' OA, 108" BH, 15 HP, 2006, #69871 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

155 Ton, U.S. Industrial #USHB155-10, hydraulic, 10' OA, 106.2" BH, 12.5" throat, 24" BG travel

Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams

155 Ton, U.S. Industrial, hydraulic, 13' OA, 2-Axis CNC, tooling, light curtain, refurbished, '05

Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams

160 Ton, Allsteel #160-12, hydraulic, 126" BH, 12' OA, 10" stroke, 8" throat, 30" FOMBG, tooling, 1981 Camera icon

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.

165 Ton, Darley, 10' OA, 8'2" BH, 10-Axis Delem DA-65, crowning, 6-Axis BG, 2000, #28183 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

165 Ton, Gasparini #PBS165-3000, 6-Axis hyd press brake, 10' OA, 102.3" BH, 2000, #69486 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

165 Ton, LVD #180BH14, hydraulic, 10'4" BH, 10" thr, FOBG, palm/foot control, pit required, #81320 Camera icon

Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith

165 Ton, Pacific #J165, CNC hydraulic press brake, 12' OA, 124" BH, 10" stroke, 11" throat Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

165 Ton, Promecam #RG150, hydraulic press brake, 13' OA, 12'2" BH, 6" stroke, 16" throat Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

170 Ton, Promecam #RG-154, hydraulic, 13' OA, 12' BH, 6" str, 16" thrt, ram clamps, foot treadle, V/S Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

175 Ton, Accurpress #175-12, hydraulic, 12' OA, 124" BH, 8" stroke, 18" open ht, 20 HP Camera icon

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

175 Ton, Accurpress #7-175-14, hydraulic, 14' OA, 148" BH, 8" str, 10" thrt, full length die holder Camera icon

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.

175 Ton, Accurpress #717510, hydraulic, 10' OA, 102" BH, 8" str, 36" BG, 20 HP, adj.str., #61977 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

175 Ton, Accurpress #717512, 12' OA, CNC AP2 BG, ETS 100 Osha movable pedestal ram control Camera icon

Centra Corporation, Perry Hall, MD 443-317-8414 (Email: ed@centracorp.com) Ed/Mike/Thomas

175 Ton, Accurpress #717512, CNC press brake, 12' OA, #13037 Camera icon

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

175 Ton, Accurpress #717514, 14' OA, 149" BH, 20 HP, 10' throat, pedestal control, die rail Video icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

175 Ton, Accupress, hydraulic, 12' OA, 124" BH, 8" stroke, Automec CNC 300 2-Axis control

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

175 Ton, Allsteel #175-12, Hydraulic, 12' OA, 126" BH, Automec CNC 150 1 Axis gauge, 1999 Camera icon

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: jamie@greenwayassoc.com) Clark Groeneweg

175 Ton, Allsteel #PB175, hydraulic, 10' OA, Automec CNC 2 Axis control, BG, Wila crowning sys, '03 Camera icon

Metalfab Inc, Indianapolis, IN 317-733-0268 (Email: karl@metalfab.us) Karl Vanderbur

175 Ton, Cincinnati #175AF18 Autoform, CNC hydraulic press brake, 18' OA, 16'6-1/2" BH Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

175 Ton, Cincinnati #175AFX16, hydraulic, 18' OA, 192" BH, auto crown, PC800 control, 2000 Camera icon

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark

175 Ton, Cincinnati #175CB, hydraulic, 14' OA, 12'6" BH, 13' x 3/16", Autogage CNC BG, #27129 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

175 Ton, Cincinnati #175CB11, hydraulic, 8' OA, 10" stroke, footswitch, under power Camera icon

HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn

175 Ton, Cincinnati #175CBX10, hydraulic, 12' OA, 10'6" BH, flush floor, 30 HP, '86, #9329 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

175 Ton, Cincinnati #175CBX12, 14' OA, 144" BH, 10" str, 17" open, 8" thr, 3-speed, 1984 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

175 Ton, Cincinnati #CB, basic heavy duty brake, 12' OA, 10'6-3/4" BH Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

175 Ton, Cincinnati #FM6, 24" x 96" flanged bed, FormMaster control Camera icon

Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

175 Ton, Cincinnati, hydraulic, 12' OA, 126" BH, 10" stroke, 2-Axis CNC control new screen 2015

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

175 Ton, Komatsu #PHS160x400, hyd press brake, 10' OA, under power ready for demo, '96 Camera icon

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

175 Ton, Krras #APB160.3700, hyd press brake, 2-Axis, 10.2' OA, 102" BH, 7" stroke, 2007 Camera icon

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

175 Ton, Pacific #J175-12 II, hydraulic, 12' OA, 10" str, 10'6" BH, Cyblec 3-Axis control, 30 HP, 1998 Camera icon

Diamond Jack Machinery Inc, Fort Smith, AR 479-785-2554 (Email: djm@diamondjackmachinery.com) Jack Yancey

175 Ton, Pacific #K175-18, hydraulic, 18' OA, Tonnage control valve, 25 HP, #4758 Camera icon

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

175 Ton, Piranha #175-12, All Steel 2-Axis hyd press brake w/tooling, 12' OA, 10'6" BH Camera icon

Machine Central LLC, Denver, CO 303-632-8818 (Email: machinecentral@comcast.net) Andy Weiss

175 Ton, Piranha #175-14, hydraulic, 14' OA, 150" BH, Automec 2-Axis CNC, '04, #10004 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

175 Ton, Primeline #APH4306x175, hydraulic press brake, 14' OA, 144" BH, Elgo 2-Axis NC control

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

175 Ton, Wysong & Miles #FAB180-144, Press Brake, 12' OA, CE DNC 50 Control, Footswitch, Light Curtain, Manuals Camera icon

HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn

175 Ton, Wysong & Miles #HF175-13, hydraulic press brake, 13' OA, 10'1" BH, 7" stroke, 12" throat Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

175 Ton, Wysong & Miles #MTH175-120, hydraulic, 10' OA, 8" stroke, 8" throat, One Shot lube system, 1994, #13568J Camera icon

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

175 Ton, Wysong & Miles #PHP175-120, hydraulic, 10' OA, 102" BH, 8" stroke, 1995 Camera icon

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark

175 Ton, Wysong & Miles #PHP175-120, down-acting press brake, 10' OA, 102" BH, 5-Axis BG, 1996 Camera icon

Alltech Distributors LLC, Franklin, WI 414-882-8979 (Email: brian@efdx.com) Brian Struzik

175 Ton, Wysong & Miles #RT4, 12' OA, Y1, Y2, 2-Axis BG, power clamp, newer Cybelec control Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

175 Ton, Wysong & Miles, hydraulic, 12' OA, Automech BG, dies, 1983

Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess

176 Ton, Guifil #HCS35-160, hydraulic brake press, 13' OA, 13.2 Kw Motor Power. Hurco Display & Control Camera icon

HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn

187 Ton, LVD #PPEB170/130, hydraulic, 10' OA, 8'6" BH, Cadman Microsoft 9-Ax.CNC, '01, #25510 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

190 Ton, Durma #AD-R30175, 10' OA, 10" stroke, 16" throat, DT-10 CNC, new in stock, #088345 Camera icon

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

190 Ton, LVD #190/10PPEB-MNC-95, CNC hydraulic press brake, 10' OA, 102" BH, 7.9" stroke Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

193 Ton, Ermak #AP10, hydraulic press brake, 10' OA, 4-Axis BG, 2011 Camera icon

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

198 Ton, Whitney #180-13P, 6-Axis Delem DA-55 CNC, 13' OA, cowning, curtains, '16, #28923 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

200 Ton, Atlantic #HDCNC2-14, press brake, 14' OA, 1986 Camera icon

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

200 Ton, Best Hydraulic Press Brake, 12' OA, tooling included Camera icon

Metalfab Inc, Indianapolis, IN 317-733-0268 (Email: karl@metalfab.us) Karl Vanderbur

200 Ton, Cincinnati #12-200X12, Press Brake, 12' OA, Manuals, 4" Stroke, Triad Control Camera icon

HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn

200 Ton, Dreis & Krump #200F12, hyd press brake, 14' OA, 12'6" BH, Automec CNC, #27560 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

200 Ton, HTC #200-12, hydraulic, 12' OA, 10'5" BH, die rail, 25 HP, 1987, #6769

A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Email: sales@ammetalmaq.com) Sales Dept.

200 Ton, HTC #G, hydraulic, 14' OA, 12'6" BH, 8.5" throat, 2-speed ram, FOPBG, foot control, #82960 Camera icon

Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith

200 Ton, HTC (Pacific), hydraulic, 10' OA, 36" bed, 5-1/2" SH, 25 HP, #81761

Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith

200 Ton, HTC, hydraulic, 16' OA, 7" stroke, 101.5" BH, 25 HP, variable speed Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

200 Ton, Niagara #200-8-10, hydraulic press brake, 10' OA, 8'6" BH, 20 HP, 12" stroke, #68451 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

200 Ton, Pacific #200-14, hydraulic, 14' OA, 12'6" BH, cylinders & electrics updated 2016, #22124 Camera icon

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Email: markm@charlestonannex.com) Mark Mannion

200 Ton, Pacific #K200-10, hydraulic, 10' OA, 8'6" BH, 5/16" x 9' bending cap, 2-Axis man.BG, 1972 Camera icon

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

200 Ton, Pacific #K200-10, 10' OA, hydraulic, Laser Press Brake control Camera icon

Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith

200 Ton, Piranha, CNC, 2-Axis, 12' OA, 2008 Camera icon

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

200 Ton, Standard #AB200-12, hydraulic, Automec CNC 99 2-Axis control, tonnage control, 10'5" BH Camera icon

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.

200 Ton, Standard Industrial #AB200-12, hydraulic, 12' OA, 10'5" BH, CNC & BG avail, 28000 lbs, new Camera icon

A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff

200 Ton, Standard Industrial #AB200-12, basic heavy duty brake, 12' OA, 10'6" BH, 1999 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

200 Ton, Standard Industrial #AB200-12, 12' OA, 10'6" BH, 8" stroke, 10" throat, 1996 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

200 Ton, U.S. Industrial #USHB200-10, hydraulic, 10' OA, 102.3" BH, 12.5" throat, 24" BG travel

Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams

200 Ton, U.S. Industrial #USHB200-13AC, Hydraulic Press Brake, 13' OA, Control Display, Foot Pedal Camera icon

HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn

200 Ton, U.S. Industrial CNC, 13' OA, 2007, #4272

Standard Industrial Machinery, Oxford, AL 256-831-1211 (Email: Sales@standardindl.com) Robert O'Neal

200 Ton, U.S. Industrial, hydraulic, 2-Axis CNC, autocrown, light curtains, new

Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams

220 Ton, Fabmaster #PPT220-12, CNC hydraulic brake, 12' OA, 2-Axis, Delem DA41 control Camera icon

Westway Machinery Ltd, Mississauga, ON 905-803-9999 (Email: sales@westwaymachinery.com) Sales Dept.

220 Ton, LVD #220JS13, 13' OA, foot pedal control, #3625 Camera icon

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

220 Ton, LVD #PPBL200/40, hydraulic, 157.5" OA, 124" BH, Automec CNC, 1989, #4488 Camera icon

Diamond Jack Machinery Inc, Fort Smith, AR 479-785-2554 (Email: djm@diamondjackmachinery.com) Jack Yancey

220 Ton, LVD #PPBL200/40, hydraulic, 157.5" OA, 124" BH, 4-3/4" ram adj., 2-Axis BG, 1989 Camera icon

SMF & Machine Tools Inc, Little Rock, AR 800-643-5839 (Email: sales@smfmachinetools.com) Roger Huntsman

220 Ton, PrimeLine #HAP37200, hydraulic, 12' OA, 10'2" BH, power back gauge, 1996 Camera icon

North American Machy Sales, Philadelphia, PA 215-332-3200 (Email: sales@northamericanmachinery.net) Hyman/Putney

225 Ton, Atlantic #HDE225-12, press brake, 12' OA, 124" BH, 7.8" stroke, DRO, tooling

Jorgenson Machine Tools, Salt Lake City, UT 877-978-1789 (Email: quote@jmtusa.com) Bud Jorgenson

225 Ton, Pacific #J225-8, hydraulic press brake, serial #8628 Camera icon

Zedco Machinery Inc, Rochester, NY 585-458-6920 (Email: productionmetal@rochester.rr.com) Leo Glogowski

225 Ton, Pacific #J225-14, 1/4", 13' OA, 3-speed hyd power unit, fine tilt adj, 10" str., #27773 Camera icon

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

225 Ton, Pacific #J225-14, hydraulic press brake, 14' OA, 12'6" BH, 10" stroke, #27673 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

225 Ton, Pacific #K225-6, 3/8" x 6', 6' OA, 4'6" BH, flanges, 10" str, 20" DLO, recond, mint

Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Charlie Peterson

225 Ton, Pacific #K225-10, hydraulic press brake, 10' OA, 8'5" BH, 12" stroke, 1979 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

225 Ton, Pacific, hydraulic, 14' OA, 12'5" BH, 14' x 3/16", power tonnage control, #27388 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

230 Ton, Cincinnati #230 AutoForm, hydraulic, 14' OA, 12'-6-1/2" BH, 10" str., 2-Axis 24" plate ga. Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

230 Ton, Cincinnati #230AF16, hydraulic, 18' OA, 16'6-1/2" BH, 10" str., 25 HP, 6-axis screen, '92 Camera icon

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

230 Ton, Cincinnati #230AS, hydraulic press brake, 8' OA, 10" stroke Camera icon

Planet Machinery Co, Livonia, MI 248-957-6439 (Email: planetmachinery@live.com) Ken/ Chris

230 Ton, Cincinnati #230CB, hydraulic, 12' OA, 10'6" BH, 10" str, 1-Axis Dynabend CNC BG, misc.tool Camera icon

Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Email: How@tznet.com) Fred Parker

230 Ton, Cincinnati #230CB-10, 12' OA, 10'6" BH, Hurco Autobend 7 2-Axis BG, 1989, S37186 Camera icon

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

230 Ton, Cincinnati #230CB10, 12' OA, 4-way die, 10'-6-3/4" BH, 10" str., elec. foot switch Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

230 Ton, Cincinnati #230CB10, hydraulic press brake, 12' OA, 10'6" BH, 30 HP, 1979, #69137 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

230 Ton, Cincinnati #230CB12, 14' OA, Hurco AB7 back gauge, STI Merlin light curtains Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

230 Ton, Cincinnati #230CBx10, 12' OA, Hurco Autobend 5C, 2-Axis CNC, used, #A5050

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

230 Ton, Cincinnati #230CBx12, hydraulic, 14' OA, 12'6" BH, 10" str, 17" open, Hurco IV, '77 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

230 Ton, Cincinnati #230FM10, hydraulic, 12' OA, 10'6" BH, 10" stroke, Hurco 5C BG, 1981, #57269 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

230 Ton, Cincinnati #230FM12, hydraulic press brake, 14' OA, 12'6-3/4" BH, 10" stroke, 8" throat, 35 HP, 2-Axis Hurco Autobend 7 BG Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

230 Ton, Cincinnati #Autoform, 12' OA, 6-Axis gauge, Y1, Y2 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

230 Ton, Cincinnati #Autoform, hydraulic, 14' OA, new PC control, autocrown, plate gauge, power clamp Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

230 Ton, Cincinnati #FMII, 14' OA, autocrown, heavy duty gauge, new PC control Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

230 Ton, Hydrapower #230-26, hydraulic press brake, 26' OA, 24'6" BH, 10" stroke, 7" throat Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

230 Ton, Pacific #J230-25/18, hydraulic, 10" str, 25' bed, 25" lwr.die hldr, dual palm buttons, '90 Camera icon

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

230 Ton, Pacific #J230-25/18, hydraulic, 25' OA, 216" BH, 10" stroke, XLT, 1990, Tag #15716

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

230 Ton, Pacific, 16' OA, 14'6" BH, 16' x 3/16", hydraulic clamping on ram, #27358 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

240 Ton, Betenbender #12-240, hydraulic, 12' OA, 126" BH, 8" thrt, 30 HP, curtains, Hurco CNC BG Camera icon

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: jamie@greenwayassoc.com) Clark Groeneweg

242 Ton, Amada #HFB220-4S, CNC press brake, 14' OA, 148" BH, 7.8" stroke, 16.5" throat Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

242 Ton, Amada #HFE220-4S, CNC press brake, 14' OA, 148" BH, 7.8" stroke, 16.5" throat, 2004 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

242 Ton, Amada #HSE-220-4S, 7-Axis CNC hydraulic brake, 14'2" BL, 12'4" HL, 7.8" str, 16.5" TD Camera icon

Federal Equipment Div, Ronkonkoma, NY 631-467-9400 (Email: sales@federalequip.com) Ron Shuster

242 Ton, Ermak #Power-Bend-Pro, CNC press brake, 10.2' OA, 128" BH, new, 2017 Camera icon

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

242 Ton, JMT #ADR, 12' OA, 122" BH, 4-Axis brake Delem DA-52 control new in 2012 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

250 Ton, Accurpress, 14' OA, 12'4" BH, ETS 3000 3-Axis CNC, 14' lower die holder, 2000, #28329 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

250 Ton, Allsteel, hydraulic, 12' OA, 8" stroke, 17" maximum open, Automec CNC 300 3-Axis CNC ga

Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

250 Ton, Cincinnati #Series-130, press brake, 10' OA, 10'6" BH, 12'8" die surface Camera icon

Brewster Machinery Sales, Bethel, CT 203-441-4655 (Email: kevin@brewstermachinery.com) Kevin Brewster

250 Ton, Delaurice Hydraulic X 10', 100" between frames, needs pins & bushings Camera icon

Action Machinery Inc, Louisville, KY 502-459-1313 (Email: actionky@bellsouth.net) Thomas Cheney

250 Ton, Pullmax Optima #250.3.1/2.55, hydraulic, 10' OA, 100.5" BH, Cybelec Modeva 10S 6-Axis CNC controller, used, #A4302 Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

250 Ton, U.S. Industrial #USHB250-13, hydraulic, 13' OA, 124" BH, 15.7" throat, 3-Axis CNC, 5 SPM

Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams

250 Ton, U.S. Industrial, hydraulic, 13' OA, 2-Axis CNC, tooling, light curtain, refurb, demo, '15

Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams

250 Ton, Wysong & Miles #MTH-250-144, hydraulic, 12' OA, 10'6" BH, AutoMec PC800 (2011), 1996 Camera icon

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

260 Ton, Femas press brake, 13' OA, hydraulic CNC, 2006, #9488 Camera icon

D & H Machinery Inc, Toledo, OH 419-841-3586 (Email: sales@dnhmachinery.com) Sales

275 Ton, Ermaksan, 13.5' OA, 12'1" BH, 13' x 5/16", 31" back gauge, 2001, #27431 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

300 Ton, Betenbender #12-300T, CNC 99 control., G24 BG, 12' OA 10'6' BH, 8" SH, die rail Camera icon

Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith

300 Ton, Chicago #300F10, hydraulic press brake, 12' OA, 10'6" BH, 0-12" ram stroke, 10" throat, 30 HP, #13787J Camera icon

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

300 Ton, Cincinnati #300H Series 8, hydraulic, 10' OA, 12" stroke, 8'6" BH Camera icon

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark

300 Ton, Cincinnati #300H, hydraulic, 16' OA, 12" str, 14'5" BH, 20" open ht, 30 HP, 1975, #7119 Camera icon

Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

300 Ton, Cincinnati #300H, hydraulic press brake, 16' OA, 14'6" BH, 12" stroke, 1975, #10116 Camera icon

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

300 Ton, Pacific #300-10, hydraulic, 10' OA, 8'6" BH, 1967 Camera icon

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

300 Ton, Pacific #300-14, 14' OA, hvy duty hydraulic, foot pedal, s/n #3258, used, #A4348 Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

300 Ton, Pacific #300-16, 16' OA, 14'5" BH, 16' x 1/4", 32" back gauge, #27421 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

300 Ton, Pacific #300-16, hydraulic press brake, 16' OA, 14'6" BH, 12" stroke Camera icon

Gulf Coast Machinery LLC, Foley, AL 251-943-0048 (Email: don4machines@gmail.com) Don Bentley

300 Ton, Pacific #300-16, hydraulic, 14'6" BH, 30 HP, 20" open hgt, 9" throat, 1969

Roskelley Machinery Corp., Salt Lake City, UT 801-313-0707 (Email: curt@roskelley.com) Curt Roskelley

300 Ton, Pacific #300-22, hydraulic press brake, 22' OA, Hurco CNC BG, elec.foot trip, #67244 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

300 Ton, Pacific #K300, hydraulic press brake, 12' OA, 10'4" BH, palm buttons, 1975, #61922 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

300 Ton, Pacific #K300-10, 10' OA, 32" BH, 12" stroke, 8" SH, 30 HP, tonnage control, #A5089 Video icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

300 Ton, Pacific #K300-14, hydraulic, 14' OA, tonnage control valve, 30 HP, 1980, #6779P Camera icon

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

330 Ton, U.S. Industrial, hydraulic, 13' OA, FOPBG, tooling, light curtain, new, low price

Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Email: david@machinery-sales.com) D. Williams

350 Ton, American Hercules #350-10, hydraulic, 10' OA, 8'6" BH, 7-3/4" stroke, 25 HP, #58488 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

350 Ton, Cincinnati #350CB, hydraulic press brake, 14' OA, 12'6" BH, 10" stroke, #67233 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

350 Ton, Cincinnati #350CBIIx12FT, hydraulic press brake, 14' OA bed & ram, 12'6" BH, 10" throat, 10" stroke, 1996, #13369J Camera icon

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

350 Ton, Cincinnati #CB-12, 14' OA, 12'6" BH, 4-way die, 1983

Chrisgo Equipment Co., Inc., Milford, OH 513-575-1152 (Email: chrisgoeq@aol.com) Chris Wilson

350 Ton, Cincinnati #FM, hydraulic, 14' OA, 12'6" BH, Hurco AB6, 1982 Camera icon

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

350 Ton, Cincinnati #FMII, 14' OA, 12'6" BH, Form Master CNC (2010), extended stroke, #28557 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

350 Ton, Cincinnati, hydraulic, 14' OA, 12'6" BH, 12' x 3/8", Hurco Autobend 5C back gauge, #27049 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

350 Ton, LVD Strippit #PPEB, 14.10' OA, 150" BH, Cadman 7-Ax.CNC, crowning, tooling, '06, #28678 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

350 Ton, Niagara #HBM350-12-14, 14' OA, 12'6" BH, 12" str., 3/8" x 13', die holder, '95, #23156 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

350 Ton, Niagara #HBM350-20-22, hydraulic, 22' OA, 240" BH, 12" stroke, 1995 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

350 Ton, Niagara #HD350-12-14, hydraulic, 14' OA, 12'6" BH, 13'6" x 3/8" capacity, 1995 Camera icon

Grand Marshall Machinery Inc, Hauppauge, NY 917-576-2510 (Email: sales@grandmarshallmachinery.com) Larry/ Paul

350 Ton, Pacific #K350-12, 12' OA, 124" BH, Automec CNC 2000 BG, s/n #9497, 1985 Camera icon

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

350 Ton, Pacific #K350-18, press brake, 18' OA Camera icon

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: christina@mmi-direct.com) C. Comerouski

350 Ton, Pullmax Optima #320, hydraulic, 11" str, 10" thrt, Cybelec DNC80 Multi Axis CNC, '95 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

352 Ton, Trumpf #V320, 14' OA, 6-Axis gauge, Delem DA-69, loaded with options Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

375 Ton, Allsteel #375-12, hydraulic, 12' OA, 10'6" BH, flanged bed-ram, flush floor, 1999 Spec Sheet

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

385 Ton, Accurpress Accell #538512, hydraulic press brake, 12' OA, 10'6" BH, 16" stroke Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

385 Ton, Novastilmec #SHP350/60, Kvara 4-Axis CNC, 20' OA, 18'2" BH, crowning, '00, #23584 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

400 Ton, Accurpress #740012, hyd brake, 12' OA, 124" BH, 10" stroke, 10" throat, #27748 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

400 Ton, Chicago #400VA-10, hydraulic press brake, 14' OA, 10'6" BH, 12" stroke, 8" SH Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

400 Ton, Cincinnati #400FMx12, hydraulic press brake, 16' OA, 12'5" BH, 40 HP, #7543P Camera icon

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

400 Ton, Cincinnati #400H, 10' OA, 14" bed, 10'6" BH, 18" str., Zakron BG, hydraulic #83181 Camera icon

Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith

400 Ton, Cincinnati #400H, 12' OA, 10'6" BH, 12" str, 20" open, 8" closed, Pit required Camera icon

Perfection Industrial Sales, Elk Grove Village, IL 847-427-3333 (Email: kathy@perfectionmachinery.com) Dept. Sales

400 Ton, Cincinnati #400H, 16' OA, 12'5" BH, 12" stroke, 40 HP, foot pedal, serial 36959 Camera icon

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

400 Ton, Cincinnati #400H, hydraulic press brake, 16' OA, 12" stroke, 12'5-3/4" BH, 10 HP, #67571 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

400 Ton, Cincinnati #400H, hydraulic press brake, 30' OA, 240" BH, 1967, #80392 Camera icon

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

400 Ton, Cincinnati #400H, hydraulic press brake, 120" BH, 12" stroke Camera icon

Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Email: paequip@zoominternet.net) Thomas Noone

400 Ton, Cincinnati #400Hx4, hydraulic press brake, 16' OA, electric foot pedal, #7481 Camera icon

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

400 Ton, Cincinnati #400Hx10, hydraulic, 12' OA, 10'6" BH, 8" stroke, 20" SH, no BG, 1975 Camera icon

HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

400 Ton, HTC #400-12, hydraulic, 12' OA, 125" BH, 7" stroke, 14.5" open, 1977, #10068 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

400 Ton, HTC #400-12, hydraulic, 12' OA, 10'6" BH, 1977 Camera icon

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

400 Ton, HTC, 20' OA, 173-1/2" BH, stroke control, power back gauge, 1972 Camera icon

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: christina@mmi-direct.com) C. Comerouski

400 Ton, Pacific #400-16, hydraulic, 16' OA, 172.5" BH, 12" str., Hurco Autobend 7 BG, 1964, #1941 Camera icon

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

400 Ton, Pacific #400-16, hydraulic, 16' OA, 12" stroke, Hurco Autobend 7 BG, from sevice, 1964

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

400 Ton, Pacific #400-17, hydraulic, 17' OA, 14'4" BH, 1963 Camera icon

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

400 Ton, Pacific #400-24, 24' OA, hydraulic press brake, s/n #2701, used, #C5030 Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

400 Ton, Pacific #K400, 16' OA, 12'4-1/2" BH, 12" stroke, 1/2" x 15', 2' rt.side horn, '64, #23256 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

400 Ton, Pacific #K400-14, 14' OA, 12'4" BH, 12" str, 22" open hght, 40 HP, AutoBend 7 BG, 1977

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Email: bjmc2@aol.com) Brian Johnston

400 Ton, Pacific #K400-24, hydra-mech press brake, 24' OA, 18.5' BH, 1973, #9617 Camera icon

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

400 Ton, Pacific, hydraulic, 16' OA, 12" str, electric foot pedal, 40 HP, 1975, #67004 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

400 Ton, Pacific, hydraulic, 16' OA, 172" BH, 16' x 5/16", stroke length adjustment, #27153 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

440 Ton, LVD #PPN400/4500, hydraulic, 14' OA, lwr die hldr, remote palm control, foot pedal, #A3556 Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

500 Ton, Cincinnati #500H, hydraulic press brake, 16' OA, 2 speed ram, 12'5" BH, 50 HP Camera icon

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.

500 Ton, Cincinnati #500H18, 22' OA, 18'4" BH, 12" stroke, light curtains, tooling, 1970, #26196 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

500 Ton, Pacific #500-14, hydraulic, 36" x 144" bed & ram, 40 HP, #6940P Camera icon

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

500 Ton, Pacific #500-17, hydraulic, 17' OA, 156" BH, flanged bed & ram Camera icon

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

500 Ton, Pacific #K500-12, hydraulic, 12' OA, 12" str, 14" thrt, 40HP, ram machined for angles, '73 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

500 Ton, Pacific #K500-16, hydraulic, 16' OA, 14'4" BH, 12" str, 40 HP, DRO for ram position, 1980 Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

500 Ton, Pacific hydraulic brake, 21' OA, #63121 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

600 Ton, Cincinnati #600Hx14, hydraulic press brake, 14' OA, 125" BH, 12" stroke, 14" throat Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

600 Ton, Cincinnati #600Hx26, 30' OA, 26' 5-3/4" BH, 14" thr., Hurco Autobend 7, #8047P Camera icon

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

600 Ton, Cincinnati #Formmaster, 16' OA, hydraulic, dual palm control, foot pedal, used, #C5057 Camera icon

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

600 Ton, Pacific #600-14, 14' OA, 12'2" BH, 12" stroke, 14" throat, 50 HP, s/n #3004 Camera icon

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

600 Ton, Pacific #K600-22, 22' OA, 18'2" BH, 12" stroke, Automec 3-Axis CNC, 1990, #28553 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

600 Ton, Pacific, hydraulic, 14' OA, 12'2" BH, 12" stroke, 14" throat, full length die holder, 50 HP Camera icon

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.

660 Ton, HydraPower #GHS-66020, 240" OA, 189" BH, 24" thr, 12" str, Delem DA 66T, '17, #28386 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

750 Ton, Accurpress hydraulic press brake, 16' OA, 1985, #18087 Camera icon

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

750 Ton, Cincinnati #750FM-12, hydraulic press brake, 16' OA Camera icon

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Scott Yoder

750 Ton, Pacific #K750-10, 10' OA, 8'2" BH, Autobend 7 CNC Back Gauge, 1982 S35593 Camera icon

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

750 Ton, Pacific #K750-18, 18' OA, 180" BH, 18" str, 14" thrt, 4-way lower die hldr, #25555 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

803 Ton, Bystronic #Xpert-800/8200, 26.9' OA, 23.29' BH, ext.stroke & OH, 6-Axis CNC BG, '15

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Email: bjmc2@aol.com) Brian Johnston

1000 Ton, Chicago Dries & Krump #1000VH14, 20' OA, 168" BH Camera icon

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Scott Yoder

1000 Ton, Phillips & Davies, hydraulic, 24' OA, 240" BH, 16" str, 36" DL, V die set, new hydraulic & controls

Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Charlie Peterson

1250 Ton, Cincinnati #1250H SERIES X 26, Hydraulic Press Brake, 26' OA, 18" stroke Camera icon

HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn

1500 Ton, Cincinnati #1500H, hydraulic, 32' OA, 336" BH, 24" stroke, 36" OH, 1970

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Email: bjmc2@aol.com) Brian Johnston

1500 Ton, Cincinnati, hydraulic, 36' OA, 22'5" BH, 18" stroke, 24" OH, 1974, #1714 Camera icon

Machinery Inc, Sherbrooke, QC 819-346-2369 (Email: sales@1machinery.com) Stephane Gourde

1800 Ton, Crossley #13, hydraulic press, used, #CD5106

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Back to Machinery & Machine Tool listings.

= photo available Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller camera icon

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search