Browse: Machinery Electrical

Machinery & Equipment >

Air & Process Gas Compressors >

Air Compressors, Rotary Screw (Positive Displacement)

AIR COMPRESSORS & ACCESSORIES:
AIR COMPRESSORS, ROTARY SCREW (Positive Displacement)

There are 266 listings in this category
Update: Tue, Nov 19, 2019 00:34:01

Advanced Search

Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added

Get email recent listings for
Air Compressors, Rotary Screw

Original Sort

13.4 scfm, 40 psi, Husky #C602H, 3.7 HP, rotary piston, vertical air compressor w/ tank, single phase, #A5906

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

13.2 cfm, 135 psig, Ingersoll Rand #SS3660V, 60 gal., 1200 RPM, 230 V., s/n 0210240023

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

15 cfm, Champion, 80 gal.receiver tank, 5 HP, piston type, #2638

Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dcrozier@tbwc.net) Dennis Crozier

15 cfm, Champion, 5 HP (2 available)

Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dcrozier@tbwc.net) Dennis Crozier

16 cfm, Ingersoll-Rand #SSR-EP5, rotary screw air compressor, 5 HP, 230/460V., low hrs

ARC Equipment Corp., Seekonk, MA 774-240-9402 (Email: arcequipmentcorp@gmail.com) Freddie Canuel

20 cfm, Kaeser #SX5, air compressor, 5 HP 3PH w/TA5 dryer & storage tank, 3500 hrs

ARC Equipment Corp., Seekonk, MA 774-240-9402 (Email: arcequipmentcorp@gmail.com) Freddie Canuel

21 cfm, 125 psig, Kaeser #SX6, rotary screw compressor, 5 HP, 230/460 V., 1997

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

22 cfm, CompAir #TA5218H37, 7.5 HP, liquid cooled w/radiator, C/S air tank, 460 V., 3 ph, 1996, #46952

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

23.6 cfm, 128 psi, Atlas Copco #GX5-FF, 7.5 HP, rotary screw air compressor, stationary type, 2002, #3952

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

24.2 cfm, 1400 psig, Atlas Copco #15SABC, air compressor, 15 HP, W/C, 568 hrs., #52517

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

25 cfm, 100 psi, Gardner Denver #EBEQDD, 15 HP, 460 V., base mounted

OEM Air Compressor Corp., Broadview, IL 773-523-8200 (Email: wlm@oemair.com) Bill Morrison

30 cfm, Ingersoll Rand #2475N5, 2 stage, 80 gal., 5/3 HP, vertical air compressor, s/n 836579

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

34 cfm, 90 psi, Ingersoll-Rand #2-2475E5 Duplex, Air Compressor, 5 HP, 120 gallon tank, 208 V.

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

34 cfm, 150 psig, Ingersoll-Rand #UP6-10-150, tank mounted, 10 HP, #103716

R A B Industries Inc, Washington, MI 586-752-0090 (Email: rabind@comcast.net) Rod A Blasius

36 cfm, 125 psig, Gardner-Denver #ELA99C, 10 HP, A/C, enclosure, 230V., surplus/low hours

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

36 cfm, 175 psi, Ingersoll-Rand #2545, piston type, 10 HP, 120 gal.tank, w/64 cfm dryer

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

39.6 cfm, 125 psi, Atlas Copco #G7FF, rotary air compressor, 10 HP, belt driven, 71 gal. tank, 2016

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

42 cfm, 120-145 psi, Eaton #ES-SRW3-10HP-DV, rotary screw air compressor, 10HP, #69738

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

55 cfm, Gardner-Denver #Casarsa, 15 HP, #70489

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

57 cfm, Devair #C15TD, 15 HP, 2009

520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

75 cfm, Hydrovane #715-C08-200, 9-bar, 15 KW, 460 V., integrally mounted air & oil cooler, on base, #42373

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

77 cfm, 115 psi, CompAir #88PUAS, 20 HP, A/C

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

77 cfm, 125 psi, Ingersoll-Rand #SSR-EP20U, 20 HP, 230/460 V., serial #J4690U93203, #49787

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

85 cfm, 100 psig, CompAir #D15HRS-10A, oil free, 20 HP, A/C, enclosure, 460 V., low hrs

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

90 cfm, 250 psi, Ingersoll-Rand #30TF25, 2-stage, 575 V., 480 V. available

Triple H Specialty Of Alabama, Andalusia, AL 334-222-8415 (Email: jason.smith@triplehal.com) Jason Smith

92-110 acfm, 125-100 psi, Gardner-Denver #EBERGA, 25 HP, tank mounted, 1981, #16805

F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward

95 cfm, 125 psig, Ingersoll-Rand #SSR-EP25SE, 25 HP, 45 amp, 460 V., s/n KE1047U95123 (2 available)

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

95 cfm, 125 psig, Ingersoll-Rand #U25-HP, 25 HP, A/C, tank mounted

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

95 cfm, Quincy #OSI25A, air compressor, 25 HP, #41932

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

96 cfm, 125 psi, Ingersoll-Rand #EP25SE, A/C, 25 HP, 230/460 V.

Quality Compressor Service, Mansfield, TX 817-822-1333 (Email: Sean@qcompressor.com) Sean McDonald

96 cfm, 125 psi, Sullair #LS-10A-25H/A/KT, 25 HP, 125 psi, serial #003-144224

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

99 cfm, 125 psi, Sullair #1809, 25 HP, 230 V., 2000 hrs, 2011

Ring Power Systems, St. Augustine, FL 904-494-1285 (Email: chris.kaczmarczyk@ringpower.com) Chris Kaczmarczyk

100 cfm, 125 psi, Gardner-Denver, rotary screw design, main drive motor 50 HP, #64384 (2 available)

TDI Group LLC, Pittsburgh, PA 412-826-4950 (Email: sales@tdigrp.com) D. DiBenedetto

101 cfm, 125 psi, Atlas Copco #GA18FF, 25 HP, Integrated dryer, aftercooler

OEM Air Compressor Corp., Broadview, IL 773-523-8200 (Email: wlm@oemair.com) Bill Morrison

110 cfm, 100 psi, Sullair #25-100L, rotary screw air compressor, 100 HP, #6533P

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

112 cfm, 125 psi, Kaeser #ASD-25, rotary screw air compressor, 25 HP, 2017, #16853

F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward

112 cfm, Gardner-Denver, Air Compressor, 25 HP, 480 V., 80 gal. tank, under power, #6559

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

113-239 cfm, 13-188 psi, Atlas Copco #GA37VSD-FF, 50 HP, Integrated dryer, aftercooler

OEM Air Compressor Corp., Broadview, IL 773-523-8200 (Email: wlm@oemair.com) Bill Morrison

115 cfm, 100 psi, Gardner-Denver #EBERFD, 25 HP, A/C, tank mounted, 230 V., 3 ph.

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

115 cfm, 125 psig, Gardner-Denver #EFC99A, 30 HP, A/C, enclosure, 230 V.

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

120 cfm, 150 psig, Bauer #ROTA-2, 30 HP, serial #9054/9030, 230/460 V., #1260-4

CCH Equipment Co, Waxahachie, TX 972-937-3597 (Email: craig@cchequipment.com) Craig Henderson

120 cfm, CompAir LeRoi #CL30CUB, 30 HP, base mounted

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

122 cfm, 105 psi, CompAir #L22, 30 HP, w/Pneumatech Mdl AD-100 air dryer, 200 gal.tank

Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Email: How@tznet.com) Fred Parker

125/217 cfm, 124/83 psi, Kaeser rotary screw air compressor, 30 HP, #13957

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

125 cfm, 125 psi, Ingersoll-Rand #SSR-EP30, screw air compressor, 30 HP, 1996

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

125 cfm, 150 psig, Ingersoll-Rand #SSR-UP6-30-150, 30 HP, sound enclosure & air tank, 120 gal., IR Intellisys control, #A5778

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

127 cfm, Ingersoll-Rand #SSR-EP30SE, rotary screw compressor, 230/460 V.

ARC Equipment Corp., Seekonk, MA 774-240-9402 (Email: arcequipmentcorp@gmail.com) Freddie Canuel

132.5 cfm, 185 psi, Atlas Copco #GA18VSD+FF, rotary screw, 25 HP, 2015, #3948

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

142-300 cfm, 13-188 psi, Atlas Copco #GA50, 67 HP, compressor, Integrated dryer

OEM Air Compressor Corp., Broadview, IL 773-523-8200 (Email: wlm@oemair.com) Bill Morrison

151 cfm, 115 psi, Sullair #LS-10-40H, rotary screw type, 40 HP, open drip proof, 230/460 V., 1998, #016478

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

158 cfm, Joy #Twistaire, 40 HP, receiver tank, #3460

Southwest Trading Industries, Houston, TX 800-492-6850 (Email: dcrozier@tbwc.net) Dennis Crozier

160 cfm, 100 psig, Gardner-Denver #EDE99K, 40 HP, A/C, open, 460 V., s/n #S000390, 1997

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

177 cfm, Hycomp #AN154, air compressor, 40 HP, #41298

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

188 cfm, 406 psi, Fes / Ges Systems #60GS, air compressor, rotary screw, liquid injection, high stage, clockwise rotation, 75 HP

Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

193 cfm, 125 psi, Gardner-Denver #EFD99E-Integra, air comperssor, 50 HP, 2012

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

194 cfm, 125 psig, Ingersoll-Rand #SSR-EP505E, air compressor, 50 HP

Special Projects Int'l, Inc., Louisville, KY 502-778-3883 (Email: cmiller@specialprojects.com) Chris Miller

194 cfm, 125 psig, Ingersoll-Rand #SSR-EP50SE, 50 HP, air cooled, Intellisys controller

Peerless Energy Systems, Omaha, NE 402-345-8311 (Email: emcmorrow@peerlessenergy.com) Ed McMorrow

200 cfm, 125 psig, Atlas Copco #GA-37, 50 HP, W/C, enclosed, 460 V., 12451 hrs, 1999

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

200 cfm, Sullair #12BS-50L ACAC 24KT rotary screw & sliding vane, 50 HP, $4000.

Iverson & Co Inc, Des Plaines, IL 847-299-2461 (Email: tiverson@iversonandco.com) Terry Iverson

202 cfm, 118.9 psi, Compair Cyclon #337, air compressor, 57 HP, #19695

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

204 cfm, 125 psi, Ingersoll-Rand #SSREP50, 50 HP, 230/460 V.

Quality Compressor Service, Mansfield, TX 817-822-1333 (Email: Sean@qcompressor.com) Sean McDonald

208 cfm, 125 psig, Ingersoll-Rand #SSR-EPE50, 50 HP, s/n F8052U93224, 460 V., #1247

CCH Equipment Co, Waxahachie, TX 972-937-3597 (Email: craig@cchequipment.com) Craig Henderson

211 cfm, 125 psi, Redmax rotary screw air compressor w/Airtek regenerative air dryer, 50 HP, 460 V., 15570 hrs., #15198

J & M Industrial Inc, Millwood, WV 304-273-0795 (Email: equip@jmindustrial.com) Sheldon Sharp

215 cfm, 100 psi, Ingersoll-Rand #SSR-XFE50, 60 HP, 230/460 V., 3 phase

OEM Air Compressor Corp., Broadview, IL 773-523-8200 (Email: wlm@oemair.com) Bill Morrison

215 cfm, 125 psi, Ingersoll-Rand #EP50-PE, 50 HP, 480 V./3 ph, 13495 very low hours

EMS Equipment Inc, Orange, CA 949-510-0479 (Email: pjanesems@gmail.com) Peter Janes Jr

215 cfm, 125 psi, Ingersoll Rand #SSR-EP50SE, 50 HP, 200 V., 3-phase, 43000 hrs

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Email: info@stevensmachinery.com) Randy/Jeff/Chris

215 cfm, 125 psig, Ingersoll-Rand #UP6-50PE-125, 50 HP, no air receiver, air cooled, 2010

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

215 cfm, 190 psig, Kaeser #CNS74, 60 HP, serial #1059, 460 V., #1255

CCH Equipment Co, Waxahachie, TX 972-937-3597 (Email: craig@cchequipment.com) Craig Henderson

223 cfm, 140 psig, Ingersoll-Rand #SSR-HP60, 60 HP, serial #F539U92, 460 V., #1244

CCH Equipment Co, Waxahachie, TX 972-937-3597 (Email: craig@cchequipment.com) Craig Henderson

231 acfm, 100 psig, Champion Compressor #EW50, 50 HP, 3 phase, 460 V.

OEM Air Compressor Corp., Broadview, IL 773-523-8200 (Email: wlm@oemair.com) Bill Morrison

231 cfm, 190 psig, Kaeser #CNS-87, 75 HP, serial #1005, 460 V., #1257

CCH Equipment Co, Waxahachie, TX 972-937-3597 (Email: craig@cchequipment.com) Craig Henderson

235 acfm, 110 psig, Quincy #QSI-235-A, 50 HP, air cooled, skid mounted

Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp

235 cfm, 125 psig, Quincy #QSI-235, 50 HP, air end, rebuilt ready to exchange, w/oil pump

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

236 cfm, 125 psig, Kaeser #BSD-50-T, 50 HP, rotary screw air compressor, 4362 hrs, 2014

T.A.C. Assets, Fairborn, OH 937-477-7712 (Email: larry.beam@sbcglobal.net) Larry Beam

236 cfm, 125 psig, Kaeser #BSD50, air cooled, 50HP, 2565 RPM, 230/460 V., 3 ph, 2011, A-3252

Capital Machinery Systems Inc, Pendleton, IN 800-788-0307 (Email: service@capital-compressor.com) Russ Phillips

238 cfm, 100 psi, Gardner-Denver #EBH99F, 50 HP, base mounted, enclosed, 2005

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

238 cfm, 100 psi, Gardner-Denver #EBHQJB, 50 HP, base mounted, enclosed

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

238 cfm, 100 psig, Gardner-Denver #ECHQJF, 50 HP, A/C, base mounted., 460 V.

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

240 cfm, 125 psi, Palatek #60DD, rotary air compressor, 60 HP, 6175 hours, #72442

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

244 cfm, 125 psi, Ingersoll-Rand #SSREP60, 60 HP, 460 V.

Quality Compressor Service, Mansfield, TX 817-822-1333 (Email: Sean@qcompressor.com) Sean McDonald

246 cfm, 125 psi, Ingersoll-Rand #EP60, 60 HP, aftercoolers, Micro-processor, 460 V.

OEM Air Compressor Corp., Broadview, IL 773-523-8200 (Email: wlm@oemair.com) Bill Morrison

246 cfm, 125 psig, Ingersoll-Rand #SSR-EP60, screw type air compressor, 60 HP

R A B Industries Inc, Washington, MI 586-752-0090 (Email: rabind@comcast.net) Rod A Blasius

250 cfm, 125 psi, LeRoi #W60SS, enclosed, 60 HP, A/C, base mounted

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

250 cfm, Quincy #QSVI-50, 50 HP, air end, rebuilt ready to exchange, w/oil pump, old style

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

256 cfm, 125 psig, CompAir LeRoi #WM60SSIIA, 60 HP, A/C, 460 V.

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

260 cfm, 125 psi, Sullair #16BS-60H, 60 HP, enclosed

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

264 cfm, 406 psi, Fes / Ges Systems #85GS, air compressor, rotary screw, liquid injection, high stage, 3" suction valve, 125 HP

Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

270 cfm, 100 psi, Atlas Copco #ZT245, air compressor, 60 HP, #21928

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

278 cfm, 175 psi, Kaeser #CS90, 75 HP, aftercooler, 460/3/60 V., TEFC

OEM Air Compressor Corp., Broadview, IL 773-523-8200 (Email: wlm@oemair.com) Bill Morrison

280 cfm, 72-180 psig, CompAir #L45SR, 67 HP, A/C, enclosure, 460 V.

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

300 cfm, 50 psi, Joy Air Pac #WGAPOL99, air compressor, 75 HP, #16494

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

300 cfm, 100 psi, Compair #WE75SSIIA, air cooled air compressor, 75 HP, #24428

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

300 cfm, 125 psig, G.D. #ECMSLC, 75 HP, W/C, open, 460 V., s/n #M54683, 32k hrs, 1990

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

320 cfm, 125 psi, CompAir #6075H, 75 HP, 220/460 V., good condition, 1995, $7, 900

Superior Systems Eng. & Mfg, La Mirada, CA 714-522-5151 (Email: klausgoettel4444@gmail.com) Klaus Goettel

320 acfm, 125 psi, Gardner-Denver #EBM99F29, 75 HP, 460V., A/C, 1999, #16952

F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward

320 cfm, 125 psi, Ingersoll-Rand, A/C, 75 HP, 230/460 V.

Quality Compressor Service, Mansfield, TX 817-822-1333 (Email: Sean@qcompressor.com) Sean McDonald

320 cfm, 132 psi, Atlas Copco #GA-55, air compressor, 74 HP, 1998

Machinery & Equipment Co, San Francisco, CA 415-467-3400 (Email: dominic@machineryandequipment.com) Dominic Piazza

328 cfm, 125 psi, Atlas Copco #GA55, 75 HP, 460 V., 2006, #A-1038

Capital Machinery Systems Inc, Pendleton, IN 800-788-0307 (Email: service@capital-compressor.com) Russ Phillips

330 cfm, 125 psi, Curtis #R/S75D, rotary screw compressor, 75 HP, 460 V.

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

330 cfm, 125 psi, Gardner-Denver #EBMQLC, 75 HP, enclosed

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

332 cfm, 125 psig, Ingersoll-Rand #SSR-EP75, 75 HP, A/C, Intellisys control, #82725

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

344 cfm, 125 psi, Sullair #5509, 75 HP, 460 V., 10898 hours, 2013

Ring Power Systems, St. Augustine, FL 904-494-1285 (Email: chris.kaczmarczyk@ringpower.com) Chris Kaczmarczyk

350 cfm, 110 psi, Kaeser #ICS90, air compressor, 75 HP, air cooled, 1990, #24664

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

350 cfm, 125 psig, Quincy #QSI-350, 75 HP, air end, rebuilt ready to exchange, w/oil pump

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

365 cfm, 100 psi, Quincy #QSI-370i, rotary screw, 75 HP, Hankinson HPRP750 Air Dryer, 460 V., 2014

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

370 cfm, 100 psi, LeRoi #WE75SSIIAH, 75 HP, A/C, enclosed

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

370 cfm, 125 psi, Quincy #QS1370ANA316, rotary screw air compressor w/Van Air dryer, 7300 hours, 1996, #11797T

Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

380-970 cfm, 100-175 psi, Sullair #TSR20, 100-200HP V/S, 460V., 4800-16500 hrs, '08-'12

Ring Power Systems, St. Augustine, FL 904-494-1285 (Email: chris.kaczmarczyk@ringpower.com) Chris Kaczmarczyk

400 cfm, 100 psig, Gardner-Denver #EAPQSMC, 100HP, W/C, open, 575V., s/n #U37878, '95

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

400 cfm, 100 psi, Gardner-Denver #EBPQMA, rotary screw air compressor, 100 HP

CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

400 cfm, 100 psi, Gardner-Denver #ECP-MCD, 100 HP, air end, rebuilt ready to exchange

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

409 cfm, 132 psi, Atlas Copco #GA75, 100 HP, aftercoolers, base mounted, microprocessor

OEM Air Compressor Corp., Broadview, IL 773-523-8200 (Email: wlm@oemair.com) Bill Morrison

431 cfm, 72-100 psig, CompAir #475SR, vari-speed, 100 HP, A/C, enclosed, 460 V.

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

443 cfm, 125 psi, Atlas Copco #GA75-125FF, 100 HP, A/C, 460 V.

Capital Machinery Systems Inc, Pendleton, IN 800-788-0307 (Email: service@capital-compressor.com) Russ Phillips

446 cfm, 125 psig, Ingersoll-Rand #EP100, 100 HP, 460 V.

Airex Systems Ltd, Delta, BC 604-946-8285 (Email: daveg@airexsystems.com) Dave Gill

446 cfm, 125 psi, Ingersoll-Rand #SSR-EP-100, air compressor, 100 HP, #63733

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

446 cfm, 125 psi, Ingersoll-Rand #SSREP100, 100 HP, 460 V. (2 available)

Quality Compressor Service, Mansfield, TX 817-822-1333 (Email: Sean@qcompressor.com) Sean McDonald

450 cfm, 125 psi, Gardner-Denver #EAP99E, 100 HP, 230/460 V., 1999, remanu, warranty

Midwest Air Compressor LLC, Waupaca, WI 715-258-8444 (Email: waynemckay@midwestaircompressor.com) Wayne McKay

450 cfm, 125 psi, Gardner-Denver #EAPQMD, 100 HP, air end, rebuilt ready to exchange

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

450 cfm, 125 psig, Gardner-Denver #EAPSMC, 100 HP, W/C, open, 460V., s/n #M69069, '92

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

450 cfm, 125 psig, Gardner-Denver #EBP99D, 100 HP, A/C, enclosure, 460 V., s/n #SO24561, '98

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

450 cfm, 125 psi, Sullivan Palatek #D450-Q6CA, portable, CAT diesel engine, 600 hrs., 1999

Peerless Energy Systems, Omaha, NE 402-345-8311 (Email: emcmorrow@peerlessenergy.com) Ed McMorrow

450 cfm, Ingersoll-Rand #SSR-XF100, 100 HP, air cooled, sound enclosure panels

Rygate, LLC, Clarkston, MI 248-709-6723 (Email: brian@rygatellc.com) Brian Bridgeman

485 cfm, 188 psi, Atlas Copco #GA75VSDFF, 100 HP, 2007

Capital Machinery Systems Inc, Pendleton, IN 800-788-0307 (Email: service@capital-compressor.com) Russ Phillips

490 cfm, 100 psi, Gardner-Denver #EBP99d, 100 HP, A/C, enclosure, 2002

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

493 cfm, 125 psi, Gardner-Denver, 100 HP, 460/3/60

Quality Compressor Service, Mansfield, TX 817-822-1333 (Email: Sean@qcompressor.com) Sean McDonald

494 cfm, 125 psig, Kaeser #CSD100, aA/C, 100HP, 3580 RPM, 230/460V., 3 ph, 2011, A-3251

Capital Machinery Systems Inc, Pendleton, IN 800-788-0307 (Email: service@capital-compressor.com) Russ Phillips

495 cfm, 125 psi, Gardner-Denver #ECP-QMC, 100 HP, 24137 hrs, air cooled, #17125

J & M Industrial Inc, Millwood, WV 304-273-0795 (Email: equip@jmindustrial.com) Sheldon Sharp

500 cfm, 110 psig, Quincy #QSI-500, 460-3-60 V., 2000

CM Company, Waxahachie, TX 469-456-2010 (Email: cminternational1965@yahoo.com) C.J. Hartman

500 cfm, 125 psig, Quincy #QSI-500I, 100HP, W/C, 460V., s/n #UN109160, 34665 hrs, '07

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

519 cfm, 140 psig, Ingersoll-Rand #SSR-HP125, 125 HP, s/n #F8631U93363, 460V., #1216

CCH Equipment Co, Waxahachie, TX 972-937-3597 (Email: craig@cchequipment.com) Craig Henderson

525 cfm, 150 psig, Sullair #25-150L, rotary screw air compressor, 150 HP, 460 V.

Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: carl.amick@machinerysolutions.com) Carl Amick

544 cfm, 125-135 psi, Sullair #LS-20S-125H, aftercoolers, 460 V.

OEM Air Compressor Corp., Broadview, IL 773-523-8200 (Email: wlm@oemair.com) Bill Morrison

548 cfm, 125 psi, Sullair #LS20S-125H, 125 HP, 230 V., 2001, remanufactured, warranty

Midwest Air Compressor LLC, Waupaca, WI 715-258-8444 (Email: waynemckay@midwestaircompressor.com) Wayne McKay

560 cfm, 100 psig, Gardner-Denver #EAQSNE, 125 HP, W/C, open, 460V., 24258 hrs, 1989

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

560 cfm, 125 psi, Atlas Copco #GA90-125, air compressor, A/C, 2000, #A-1340

Capital Machinery Systems Inc, Pendleton, IN 800-788-0307 (Email: service@capital-compressor.com) Russ Phillips

565 cfm, 125 psig, Kaeser #CSD125, rotary screw air compressor, 125 HP, 5709 hrs, 2015

F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward

584 cfm, 125 psig, Kaeser #DS171, 584 PSIG, 480 V., DS171, 90, 570 hours, 2000

Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

600 cfm, Sullair #25L, 150 HP, air end, rebuilt ready to exchange

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

614 cfm, 100 psi, Gardner-Denver #EAQQNF, 125 HP, A/C, turn valve

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

615 cfm, 125 psi, Ingersoll-Rand #SSR-EP150, 128 psi outlet, 150 HP, #386-AC0606

Midwest Steel Co, Houston, TX 713-991-7843 (Email: sales@midwest-steel.com) Sales Dept.

670 cfm, 125 psi, Ingersoll-Rand #SSR-EP150, 150 HP, 460 V.

Quality Compressor Service, Mansfield, TX 817-822-1333 (Email: Sean@qcompressor.com) Sean McDonald

677 acfm, 100 psig, Gardner-Denver #VST55-90-A, 2 stage air cooled rotary screw air compressor, 100 HP, #18034

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

700 cfm, 72-190 psi, CompAir #L120SR, 160 HP, A/C, enclosed, vari-speed, low hrs.

Air Services Company, Elk Grove Village, IL 847-725-2100 (Email: mbyrd@airservicesco.com) Mike Byrd

700 cfm, 100 psi, Gardner-Denver #EBQ99F, 150 HP, air end, rebuilt ready to exchange

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

700 cfm, 125 psi, Gardner-Denver #EBQSOA, 150 HP, air end, rebuilt ready to exchange

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

700 cfm, 125 psi, Sullair #LS-25 15 ASAC, 150 HP, 460/3/60

Quality Compressor Service, Mansfield, TX 817-822-1333 (Email: Sean@qcompressor.com) Sean McDonald

740 cfm, 125 psig, Quincy #QSI-740, 150 HP, air end, rebuilt ready to exchange, w/oil pump

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

750 cfm, 100 psi, Gardner-Denver #EBQ99F, 150 HP, 575 V., air end, warranty

Midwest Air Compressor LLC, Waupaca, WI 715-258-8444 (Email: waynemckay@midwestaircompressor.com) Wayne McKay

750 cfm, 100 psi, Sullair #LS20-150L, 150 HP, 460 V., A/C, A/C, tested with warranty

Midwest Air Compressor LLC, Waupaca, WI 715-258-8444 (Email: waynemckay@midwestaircompressor.com) Wayne McKay

750 cfm, 110 psig, Quincy #QSI-750, 460-3-60 V., 2008

CM Company, Waxahachie, TX 469-456-2010 (Email: cminternational1965@yahoo.com) C.J. Hartman

750 cfm, Kaeser #DS/B200, rotary screw air compressor, 150 HP, 480V., 192 FLA, 1992

Bullseye Industrial Sales LLC, Middlebury, IN 574-825-4990 (Email: jeremy@bullseyeindustrialsales.com) Jeremy Wingard

760 cfm, 100 psi, Gardner-Denver Electra-Saver #EBQ, 200 HP, A/C, A/C, 460 V.

Transamerican Equip Co LLC, Tuscaloosa, AL 205-454-8184 (Email: sales@tecequip.net) Ralfe Hickman

785 cfm, 125 psi, Sullair #DR13-200HW, 200 HP, trailer mounted, 7027 hrs., excellent, 2008

Hawthorne Power Systems, San Diego, CA 858-974-6840 (Email: mreza@hawthornecat.com) Mark Reza

800 cfm, 100 psi, Gardner-Denver #ESPFA, 200 HP, air end, rebuilt ready to exchange

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

800 cfm, 100 psig, Quincy #QSI1000ACA3, 200 HP, A/C, enclosed, 3/60/460 V., 1987

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

809 cfm, 100 psi, Ingersoll-Rand Centac #C8M2, 200 HP, 460 V., 1993, #3168-103

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

850 cfm, 125 psi, Gardner-Denver #EAUQPD, 200 HP, air end, rebuilt ready to exchange

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

855 cfm, 110 psig, Sullair #32-200, rotary screw air compressor, 200 HP, A/C, 17024 hrs

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

857 cfm, 400 psig, Sullair #PCC-25L-37-10M, rotary screw compressor, new surplus

Sep-Pro Systems Inc, Houston, TX 832-243-6360 (Email: mminor@sepprosystems.com) Matthew Minor

865 cfm, 145 psig, Kaeser #DSD200, rotary screw air compressor, 200 HP, 25000 hrs, 2006

F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward

883 cfm, 190 psig, Kaeser #DSD150, rotary screw, 150 HP, Sigma PLC, 3800 gal.tank, 2002

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

888 cfm, 125 psi, Sullair #V200S-200H, vari-speed, sgl stage, 200 HP, Zeks air dryer, '16

ACT Inc, Fullerton, CA 714-441-1992 (Email: rsg@actmachinery.com) Randy Goodman

892 cfm, 110 psi, Ingersoll-Rand #SSR-EP200, 200 HP, 460 V.

Quality Compressor Service, Mansfield, TX 817-822-1333 (Email: Sean@qcompressor.com) Sean McDonald

892 cfm, 125 psi, Ingersoll Rand #EP200, 200 HP, 460 V., 3ph, FLA 262, enclosure, Intellsys

OEM Air Compressor Corp., Broadview, IL 773-523-8200 (Email: wlm@oemair.com) Bill Morrison

893 acfm, 145 psi, Kaeser #SFC160, 220 HP frequency drive, rebuilt cond., 2004

F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward

900 cfm, 120/130 psi, Sullivan Palatek #200UD, 200 HP, A/C, 460 V., 2000 (2 available)

Transamerican Equip Co LLC, Tuscaloosa, AL 205-454-8184 (Email: sales@tecequip.net) Ralfe Hickman

900 cfm, 125 psig, Sullivan /Palatek #200GC, water cooled, open, 200 HP, 460/3/60

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

900 cfm, 150 psi, Sullair #900CH/AF/DTQ/CA4, aftercooler, diesel, 1137 hrs, like new, '15

Hawthorne Power Systems, San Diego, CA 858-974-6840 (Email: mreza@hawthornecat.com) Mark Reza

905 cfm, 125 psi, Atlas Copco #GA160-125, 200 HP, A/C, 460 V.

Capital Machinery Systems Inc, Pendleton, IN 800-788-0307 (Email: service@capital-compressor.com) Russ Phillips

905 cfm, 130 psig, Atlas Copco #GA160W, 200 HP, W/C, enclosure, 460 V., s/n #AIF 028 189, '95

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

925 cfm, 100 psig, Sullair #LS-25-200L, 200 HP, 460 V., starter mounted, 18400 hrs, like new

CM Company, Waxahachie, TX 469-456-2010 (Email: cminternational1965@yahoo.com) C.J. Hartman

942 cfm, 200 psi, Ingersoll-Rand #SSRHXPE250, 460 VAC, 1997, #566

R D Erbe & Associates Inc, Lansing, MI 517-244-9919 (Email: machtrader@aol.com) Ronald Erbe

942 cfm, 200 psi, Ingersoll-Rand #SSRHXPE250, 460 VAC, 1997, #567

R D Erbe & Associates Inc, Lansing, MI 517-244-9919 (Email: machtrader@aol.com) Ronald Erbe

953 cfm, 100 psig, Atlas Copco #GA160, 200 HP, 460 V.

Airex Systems Ltd, Delta, BC 604-946-8285 (Email: daveg@airexsystems.com) Dave Gill

960 cfm, 125 psi, Gardner-Denver, 200 HP, 460 V., tested with warranty

Midwest Air Compressor LLC, Waupaca, WI 715-258-8444 (Email: waynemckay@midwestaircompressor.com) Wayne McKay

960 cfm, 125 psi, Sullair #TS20-200H, 200 HP, 460 V., air cooled, vari-speed, warranty (3 available)

Midwest Air Compressor LLC, Waupaca, WI 715-258-8444 (Email: waynemckay@midwestaircompressor.com) Wayne McKay

960 cfm, 200 psi, Hydra #HS200, 250 HP, water cooled, skid mounted, #15558

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

960 cfm, 200 psi, Ingersoll-Rand #SSRHXPE250, 460 VAC, 2011, #565

R D Erbe & Associates Inc, Lansing, MI 517-244-9919 (Email: machtrader@aol.com) Ronald Erbe

960 cfm, 350 psi, Sullair #LS20T, screw compressor, 400 HP, 400/350/960

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

979 cfm, 14.7/140 psi, Ingersoll-Rand #S6R-HP250, 250 HP, s/n #F3579U91, 460V., #1267

CCH Equipment Co, Waxahachie, TX 972-937-3597 (Email: craig@cchequipment.com) Craig Henderson

990 cfm, 125 psi, Ingersoll-Rand #EPE-200-2S, 2-stage, 200 HP, A/C, 460 V., 2010

Capital Machinery Systems Inc, Pendleton, IN 800-788-0307 (Email: service@capital-compressor.com) Russ Phillips

993 cfm, Ingersoll-Rand #SSR-XF200 Air, air compressor, 200 HP, 460 V., 3 phase, 60 Hz

Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-389-6449 (Email: amanda@1800lastbid.com) Amanda Bowers

1000 cfm, 110 psi, Kellogg #6250CWL, 250 HP, water cooled, skid mounted, 1995, #19729

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

1000 cfm, 110 psi, Quincy #QSI-1000, 200 HP, 460 V., air end, warranty

Midwest Air Compressor LLC, Waupaca, WI 715-258-8444 (Email: waynemckay@midwestaircompressor.com) Wayne McKay

1000 cfm, 110 psig, Sullair #LS2-200L, 460-3-60 V., 2003

CM Company, Waxahachie, TX 469-456-2010 (Email: cminternational1965@yahoo.com) C.J. Hartman

1011 cfm, 14.7/125 psi, Atlas Copco #ZR4-62, 300 HP, s/n #ARP605978, 460V., #1221

CCH Equipment Co, Waxahachie, TX 972-937-3597 (Email: craig@cchequipment.com) Craig Henderson

1030 cfm, 125 psi, Atlas Copco #ZR-4C, 200 HP, W/C, 480 V., refurbished

Wenniger Compressor Co, Milwaukee, WI 414-372-5320 (Email: cliffw@wennigercompressor.com) Cliff Wenniger

1066 cfm, 100 psi, Gardner-Denver #EAUQQD, 250 HP, air end, rebuilt ready to exchange

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

1066 cfm, 125 psig, Ingersoll-Rand #SSR-EP250, 250 HP, oil cooled, low price, S37762

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

1066 scfm, 125/200 psi, Ingersoll-Rand #SSR-EP250S, rotary screw air compressor, 2-stage, 250 HP, touch pad controller w/LED

Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

1075 cfm, 125 psi, Sullair #LS25S-250H/A, 250 HP, 460 V., remanufactured, warranty

Midwest Air Compressor LLC, Waupaca, WI 715-258-8444 (Email: waynemckay@midwestaircompressor.com) Wayne McKay

1100 cfm, 125 psi, Quincy #QSI-1000, 200 HP, 460/3/60, guaranteed & complete, $10000

American Steel Products Co, Toledo, OH 419-843-6051 (Email: ford@americansteel.com) Ford Cauffiel

1105 cfm, 100 psig, Sullair #32/25-200L Tandem, 250 HP, 460 V.

Airex Systems Ltd, Delta, BC 604-946-8285 (Email: daveg@airexsystems.com) Dave Gill

1120 cfm, 100 psig, Sullair #TS-32-200L, 200 HP, 460 V., Wye Delta stater, low hours, rebuilt

CM Company, Waxahachie, TX 469-456-2010 (Email: cminternational1965@yahoo.com) C.J. Hartman

1155 cfm, 125 psi, Atlas Copco #GA200-125, 250 HP, W/C, 480 V.

Capital Machinery Systems Inc, Pendleton, IN 800-788-0307 (Email: service@capital-compressor.com) Russ Phillips

1200 cfm, 200 psig, Kaeser #KRD-1200, air dryer, 43/110°F, s/n #0369-21CS-9805-23K

HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

1206 icfm, 100 psi, Compair Leroi #300SSM, rotary screw compressor, Natural Gas (2 available)

Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

1250 cfm, 100 psi, Gardner-Denver #EAUQRG, 300 HP, air end, rebuilt ready to exchange

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

1250 cfm, 100 psig, Sullair #32-250L, 250 HP, 460 V.

Airex Systems Ltd, Delta, BC 604-946-8285 (Email: daveg@airexsystems.com) Dave Gill

1250 cfm, 125 psi, Ingersoll-Rand #EP300, 300 HP, 460 V. A/C, rotary, (2) available

Midwest Air Compressor LLC, Waupaca, WI 715-258-8444 (Email: waynemckay@midwestaircompressor.com) Wayne McKay

1250 cfm, 140 psig, Quincy #QSI1000ACA3, 300 HP, A/C, enclosed, 460 V., s/n #34915, 1987

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

1250 cfm, Ingersoll-Rand #SSR, 300 HP

Compressor Service Co, Kannapolis, NC 704-331-0707 (Email: lenbeaver@gmail.com) Paul Len Beaver

1314 cfm, 125 psi, Atlas Copco #GA250, air cooled, 480 V., 2005, #A-1793

Capital Machinery Systems Inc, Pendleton, IN 800-788-0307 (Email: service@capital-compressor.com) Russ Phillips

1350 cfm, 125 psi, Leroi Compair #W2M300SSA, 2-stage oil flooded, 400 HP, #4238

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

1450 cfm, 110 psi, Sullair #25-300HP, air compressor, 300 HP

Special Projects Int'l, Inc., Louisville, KY 502-778-3883 (Email: cmiller@specialprojects.com) Chris Miller

1451 cfm, 14.7/143 psi, Ingersoll-Rand #SSR-HP350, 350 HP, s/n E1379U96072, 460V., #1251

CCH Equipment Co, Waxahachie, TX 972-937-3597 (Email: craig@cchequipment.com) Craig Henderson

1476 cfm, 125 psi, Ingersoll-Rand #SSR-EPE300-2S, 300 HP, 2300 V., pkgd.units (2 available)

Transamerican Equip Co LLC, Tuscaloosa, AL 205-454-8184 (Email: sales@tecequip.net) Ralfe Hickman

1499 cfm, 132 psi, Atlas Copco #GA315, 420 HP, A/C, TEFC, soft start, 460V., 882 hrs, 2015

Capital Machinery Systems Inc, Pendleton, IN 800-788-0307 (Email: service@capital-compressor.com) Russ Phillips

1500 cfm, 14.7/125 psi, Atlas Copco #ZR5-60, 350 HP, s/n #AIF0001821, 460V., #1268

CCH Equipment Co, Waxahachie, TX 972-937-3597 (Email: craig@cchequipment.com) Craig Henderson

1500 cfm, 14.7/125 psi, Atlas Copco #ZR5-60, 400 HP, s/n #ARP605978, 460V., #1222

CCH Equipment Co, Waxahachie, TX 972-937-3597 (Email: craig@cchequipment.com) Craig Henderson

1500 cfm, 100 psig, Leroi #300SS, 300 HP, 460 V.

Airex Systems Ltd, Delta, BC 604-946-8285 (Email: daveg@airexsystems.com) Dave Gill

1500 cfm, 100 psig, Quincy Northwest #QNW-1500B, 350 HP, 460 V.

Airex Systems Ltd, Delta, BC 604-946-8285 (Email: daveg@airexsystems.com) Dave Gill

1500 cfm, 100 psig, Quincy #QSI-1500A, 300 HP, 460 V.

Airex Systems Ltd, Delta, BC 604-946-8285 (Email: daveg@airexsystems.com) Dave Gill

1500 cfm, 110 psig, Ingersoll-Rand #SSR-FX-350, 460-3-60 V., 2014

CM Company, Waxahachie, TX 469-456-2010 (Email: cminternational1965@yahoo.com) C.J. Hartman

1500 cfm, 110/130 psi, Quincy, 300/350 HP, water or air cooled, complete reman (4 available)

Midwest Air Compressor LLC, Waupaca, WI 715-258-8444 (Email: waynemckay@midwestaircompressor.com) Wayne McKay

1500 cfm, 125 psi, Gardner-Denver, 300 HP, 460 V., air or water cooled, tested with warranty

Midwest Air Compressor LLC, Waupaca, WI 715-258-8444 (Email: waynemckay@midwestaircompressor.com) Wayne McKay

1500 cfm, 150 psi, Quincy #Q-1500, 350 HP, skid mounted, very low hours (2 available)

Sierra Equipment Co. Inc., Hayward, CA 510-887-7500 (Email: sales@sierraequipmentcompany.com) Sales

1626 cfm, 140 psi, Ingersoll-Rand #SSR-HP-400, 400 HP, s/n #E1255U94168, 460V., #1250

CCH Equipment Co, Waxahachie, TX 972-937-3597 (Email: craig@cchequipment.com) Craig Henderson

1680 cfm, Leroi Comp Air #W2M300SSA, 400 HP, screw, liquid cooled

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

1795 cfm, 109 psi, Atlas Copco #GA315VSD, vari-speed drive, 460 V., 400 HP, #2837

Capital Machinery Systems Inc, Pendleton, IN 800-788-0307 (Email: service@capital-compressor.com) Russ Phillips

1800 cfm, 125 psig, Sullair #TS-32-400H, 460-3-60 V, 1997

CM Company, Waxahachie, TX 469-456-2010 (Email: cminternational1965@yahoo.com) C.J. Hartman

2245 cfm, 110 psi, Ingersoll-Rand #EPE450-2S, 2 stage, oil flooded (2 available)

Capital Machinery Systems Inc, Pendleton, IN 800-788-0307 (Email: service@capital-compressor.com) Russ Phillips

2245 cfm, Ingersoll-Rand #SSREPE450-2S, 450 HP, 460 V.(2 available)

Wenniger Compressor Co, Milwaukee, WI 414-372-5320 (Email: cliffw@wennigercompressor.com) Cliff Wenniger

2385 cfm, 123 psi, Atlas Copco #ZR5-60, 2 stage rotary water cooled, fully enclosed screw air compressor, 350 HP (2 available)

Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

2405 cfm, 103 psi, Ingersoll-Rand #SSR-XF4502S, 450 HP, A/C, 460 V., remanufactured

Midwest Air Compressor LLC, Waupaca, WI 715-258-8444 (Email: waynemckay@midwestaircompressor.com) Wayne McKay

2425 cfm, 125 psig, Ingersoll-Rand #EPE-5002S, 600 HP, 480V., 2012 never installed, air/oil coolers

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

2500 cfm, 125 psig, Ingersoll-Rand #SSREPE-450-25, 460-3-60, 2003

CM Company, Waxahachie, TX 469-456-2010 (Email: cminternational1965@yahoo.com) C.J. Hartman

2500 cfm, 125 psi, Sullair #TS32-S400, 400 HP, A/C or W/C, 14500 hrs, 2000, warranty

Midwest Air Compressor LLC, Waupaca, WI 715-258-8444 (Email: waynemckay@midwestaircompressor.com) Wayne McKay

2850 cfm, 125 psig, Sullair #TS-32600H, 460-3-60 AC/AC, 2000

CM Company, Waxahachie, TX 469-456-2010 (Email: cminternational1965@yahoo.com) C.J. Hartman

30 psi, Joy #A-030TAN2E TwistAir Compressor, 30 HP, 599 hours

A & A Machinery Liquidations, Morrisville, PA 215-428-1100 (Email: aasales@aamachinery.com) Tim Cromwell

Joy #A-030TAN4D TwistAir Compressor, 30 HP, 39" x 58" x 72" approximate footprint

A & A Machinery Liquidations, Morrisville, PA 215-428-1100 (Email: aasales@aamachinery.com) Tim Cromwell

100 psi, Compair Leroi #300SSM, Rotary Screw Compressor, Natural Gas

Equipment Recovery Corp, Willoughby, OH 440-942-3003 (Email: kevink@ercsurplusequip.com) Kevin Klicman

100 psi, Gardner-Denver, rotary screw air compressor, 150 HP

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

100/110 psig, Sullair #12B-50L, 50 HP, 69100 hrs, rotary screw air compressor, #10760

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

100 psig, Sullair #LS-20, air xompressor, #7312

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

110 psig, Quincy #QSTFHNR22l, 25 HP, 2172 RPM, 200 gallon tank, 220 V., 3 ph., s/n #39532

Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

115/125 psig, Sullair #LS10, rotary screw, 25 HP, 1750 RPM, 6756 hrs, needs repair, #10694

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

123 psi, Atlas Copco #ZR3DE, rotary screw air compressor, 125 HP, air cooled, 1800 RPM, 230/460 V., 1983, #49020

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

125 psig, Atlas Copco #GA110VSD+C142AP, screw type, A/C, 150 HP, 2018, #10659

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

125 psig, Gardner Denver #VS25-40A, rotary screw air compressor, 460 V., 2006

T.A.C. Assets, Fairborn, OH 937-477-7712 (Email: larry.beam@sbcglobal.net) Larry Beam

125 psi, Gardner-Denver #EDE99K04, air compressor, 50 HP, 460 V., control cabinet, air cooling, 1998, #2949-13

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

125 psi, Gardner-Denver #EDF99D, air compressor, 75 HP, 460 V., control cabinet, air cooling, 1998, #2949-12

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

125 psi, Joy Twistair #025TAN2D, air compressor, 25 HP, mounted on air tank, serial #147605, #3155-17

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

125 psi, Joy Twistair #TA-020TAN2D, air compressor, 20 HP, mounted on air tank, 230/460 V., s/n #147694, #3155-18

Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente

125 psi, Leroy #A219-152-3R, rotary screw compressor, 75 HP, automatic systems, #70523

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

125/135 psig, Sullair #LS12-50H/W/SUL, 50 HP Toshiba induction motor, 1780 RPM, water cooled, with Silvan air tank

Ideal Machinery Inc, Holly, MI 248-627-3135 (Email: caitlin@idealmachinery.com) Caitlin Demasellis

313 psig, Mycom #125SU-LX, 470 psig hydraulic, serial #1252131

Samco Enterprises Inc, Houston, TX 281-443-6505 (Email: mark.miller@samcoenterprises.com) Mark Miller

350 psig, Kobelco #32LNB, PE11018, screw air compressor, 3500 RPM, 2014

Industrial Electric & Machine, Englewood, CO 303-594-0670 (Email: sales@iemcolorado.com) Ryan McGuire

Atlas Copco #1616-7256-81, air end, (element only), rebuilt ready to exchange

National Compressor Services LLC, Holland, OH 419-868-4980 (Email: ebabcock@national-compressor.com) Erik Babcock

Atlas Copco #GA90VSD-FF, rotary screw air compressor, 120 HP, S40191

Perfection Industrial Sales, Elk Grove Village, IL 847-545-6374 (Email: jennifer@perfectionindustrial.com) Jennifer Reiner

Atlas Copco #GA200, air compressor, 250 HP, S40210

Perfection Industrial Sales, Elk Grove Village, IL 847-545-6374 (Email: jennifer@perfectionindustrial.com) Jennifer Reiner

CompAir #L22, lubricated rotary screw compressor, 7.5 bar, 30 HP, 71Db, 2011

520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Compressor World #E-25, Air Compressor, SPC 200, 25 HP, S/N SW82872, never used

A & A Machinery Liquidations, Morrisville, PA 215-428-1100 (Email: aasales@aamachinery.com) Tim Cromwell

Gardner-Denver #69-25, air compressor, #016413

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

Gardner-Denver, Air Compressor, 10 HP, 220/440 V., 3-ph, C-Aire 120 gal. horiz. tank

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

Gardner-Denver, piston type air compressor, 20 HP, high quality

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

Ingersoll-Rand #2545D10, air compressor

Victory Machinery Exchange, Lake Forest, IL 847-918-9797 (Email: sales@victorymachinery.com) Bob or Neal

Ingersoll-Rand #DXR75, air compressor, S/N 951DXR9171, 1995, #016412

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

Ingersoll-Rand #SSR-EP75, air compressor, 75 HP, 460 V., 3-phase, 1991, s/n F2472U91

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Joy Twistair #TA1000BWW4AH, rotary compressor, 100 HP, dryer, skid mounted, 32000 hrs

Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

Quincy #QMT20ACA12SG, air compressor, S/N 87921, #016395

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

Quincy #QSI235WNW1, Rotary Screw Air Compressor, 50 HP, water cooled, 13000 Hours

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

Rol Air air compressor, 2 stage, 10 HP, 120 gallon tank, 230/440 V., 3 ph, #1536

Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

Sullair #RSVS10-10A-AC, rotary screw air compressor

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

Sullair #TS-32, compressor, 400 HP, 480 VAC, 3 ph.

Electro Corp, Kingsbury, IN 219-393-5571 (Email: wes.electrocorp@frontier.com) Wes Juszkiewicz

Back to category listings.

= photo available Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller Video

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search

AIR COMPRESSORS & ACCESSORIES:AIR COMPRESSORS, ROTARY SCREW (Positive Displacement)

13.4 scfm, 40 psi, Husky #C602H, 3.7 HP, rotary piston, vertical air compressor w/ tank, single phase, #A5906

13.2 cfm, 135 psig, Ingersoll Rand #SS3660V, 60 gal., 1200 RPM, 230 V., s/n 0210240023

15 cfm, Champion, 80 gal.receiver tank, 5 HP, piston type, #2638

15 cfm, Champion, 5 HP (2 available)

16 cfm, Ingersoll-Rand #SSR-EP5, rotary screw air compressor, 5 HP, 230/460V., low hrs

20 cfm, Kaeser #SX5, air compressor, 5 HP 3PH w/TA5 dryer & storage tank, 3500 hrs

21 cfm, 125 psig, Kaeser #SX6, rotary screw compressor, 5 HP, 230/460 V., 1997

22 cfm, CompAir #TA5218H37, 7.5 HP, liquid cooled w/radiator, C/S air tank, 460 V., 3 ph, 1996, #46952

23.6 cfm, 128 psi, Atlas Copco #GX5-FF, 7.5 HP, rotary screw air compressor, stationary type, 2002, #3952

24.2 cfm, 1400 psig, Atlas Copco #15SABC, air compressor, 15 HP, W/C, 568 hrs., #52517

25 cfm, 100 psi, Gardner Denver #EBEQDD, 15 HP, 460 V., base mounted

30 cfm, Ingersoll Rand #2475N5, 2 stage, 80 gal., 5/3 HP, vertical air compressor, s/n 836579

34 cfm, 90 psi, Ingersoll-Rand #2-2475E5 Duplex, Air Compressor, 5 HP, 120 gallon tank, 208 V.

34 cfm, 150 psig, Ingersoll-Rand #UP6-10-150, tank mounted, 10 HP, #103716

36 cfm, 125 psig, Gardner-Denver #ELA99C, 10 HP, A/C, enclosure, 230V., surplus/low hours

36 cfm, 175 psi, Ingersoll-Rand #2545, piston type, 10 HP, 120 gal.tank, w/64 cfm dryer

39.6 cfm, 125 psi, Atlas Copco #G7FF, rotary air compressor, 10 HP, belt driven, 71 gal. tank, 2016

42 cfm, 120-145 psi, Eaton #ES-SRW3-10HP-DV, rotary screw air compressor, 10HP, #69738

55 cfm, Gardner-Denver #Casarsa, 15 HP, #70489

57 cfm, Devair #C15TD, 15 HP, 2009

75 cfm, Hydrovane #715-C08-200, 9-bar, 15 KW, 460 V., integrally mounted air & oil cooler, on base, #42373

77 cfm, 115 psi, CompAir #88PUAS, 20 HP, A/C

77 cfm, 125 psi, Ingersoll-Rand #SSR-EP20U, 20 HP, 230/460 V., serial #J4690U93203, #49787

85 cfm, 100 psig, CompAir #D15HRS-10A, oil free, 20 HP, A/C, enclosure, 460 V., low hrs

90 cfm, 250 psi, Ingersoll-Rand #30TF25, 2-stage, 575 V., 480 V. available

92-110 acfm, 125-100 psi, Gardner-Denver #EBERGA, 25 HP, tank mounted, 1981, #16805

95 cfm, 125 psig, Ingersoll-Rand #SSR-EP25SE, 25 HP, 45 amp, 460 V., s/n KE1047U95123 (2 available)

95 cfm, 125 psig, Ingersoll-Rand #U25-HP, 25 HP, A/C, tank mounted

95 cfm, Quincy #OSI25A, air compressor, 25 HP, #41932

96 cfm, 125 psi, Ingersoll-Rand #EP25SE, A/C, 25 HP, 230/460 V.

96 cfm, 125 psi, Sullair #LS-10A-25H/A/KT, 25 HP, 125 psi, serial #003-144224

99 cfm, 125 psi, Sullair #1809, 25 HP, 230 V., 2000 hrs, 2011

100 cfm, 125 psi, Gardner-Denver, rotary screw design, main drive motor 50 HP, #64384 (2 available)

101 cfm, 125 psi, Atlas Copco #GA18FF, 25 HP, Integrated dryer, aftercooler

110 cfm, 100 psi, Sullair #25-100L, rotary screw air compressor, 100 HP, #6533P

112 cfm, 125 psi, Kaeser #ASD-25, rotary screw air compressor, 25 HP, 2017, #16853

112 cfm, Gardner-Denver, Air Compressor, 25 HP, 480 V., 80 gal. tank, under power, #6559

113-239 cfm, 13-188 psi, Atlas Copco #GA37VSD-FF, 50 HP, Integrated dryer, aftercooler

115 cfm, 100 psi, Gardner-Denver #EBERFD, 25 HP, A/C, tank mounted, 230 V., 3 ph.

115 cfm, 125 psig, Gardner-Denver #EFC99A, 30 HP, A/C, enclosure, 230 V.

120 cfm, 150 psig, Bauer #ROTA-2, 30 HP, serial #9054/9030, 230/460 V., #1260-4

120 cfm, CompAir LeRoi #CL30CUB, 30 HP, base mounted

122 cfm, 105 psi, CompAir #L22, 30 HP, w/Pneumatech Mdl AD-100 air dryer, 200 gal.tank

125/217 cfm, 124/83 psi, Kaeser rotary screw air compressor, 30 HP, #13957

125 cfm, 125 psi, Ingersoll-Rand #SSR-EP30, screw air compressor, 30 HP, 1996

125 cfm, 150 psig, Ingersoll-Rand #SSR-UP6-30-150, 30 HP, sound enclosure & air tank, 120 gal., IR Intellisys control, #A5778

127 cfm, Ingersoll-Rand #SSR-EP30SE, rotary screw compressor, 230/460 V.

132.5 cfm, 185 psi, Atlas Copco #GA18VSD+FF, rotary screw, 25 HP, 2015, #3948

142-300 cfm, 13-188 psi, Atlas Copco #GA50, 67 HP, compressor, Integrated dryer

151 cfm, 115 psi, Sullair #LS-10-40H, rotary screw type, 40 HP, open drip proof, 230/460 V., 1998, #016478

158 cfm, Joy #Twistaire, 40 HP, receiver tank, #3460

160 cfm, 100 psig, Gardner-Denver #EDE99K, 40 HP, A/C, open, 460 V., s/n #S000390, 1997

177 cfm, Hycomp #AN154, air compressor, 40 HP, #41298

188 cfm, 406 psi, Fes / Ges Systems #60GS, air compressor, rotary screw, liquid injection, high stage, clockwise rotation, 75 HP

193 cfm, 125 psi, Gardner-Denver #EFD99E-Integra, air comperssor, 50 HP, 2012

194 cfm, 125 psig, Ingersoll-Rand #SSR-EP505E, air compressor, 50 HP

194 cfm, 125 psig, Ingersoll-Rand #SSR-EP50SE, 50 HP, air cooled, Intellisys controller

200 cfm, 125 psig, Atlas Copco #GA-37, 50 HP, W/C, enclosed, 460 V., 12451 hrs, 1999

200 cfm, Sullair #12BS-50L ACAC 24KT rotary screw & sliding vane, 50 HP, $4000.

202 cfm, 118.9 psi, Compair Cyclon #337, air compressor, 57 HP, #19695

204 cfm, 125 psi, Ingersoll-Rand #SSREP50, 50 HP, 230/460 V.

208 cfm, 125 psig, Ingersoll-Rand #SSR-EPE50, 50 HP, s/n F8052U93224, 460 V., #1247

211 cfm, 125 psi, Redmax rotary screw air compressor w/Airtek regenerative air dryer, 50 HP, 460 V., 15570 hrs., #15198

215 cfm, 100 psi, Ingersoll-Rand #SSR-XFE50, 60 HP, 230/460 V., 3 phase

215 cfm, 125 psi, Ingersoll-Rand #EP50-PE, 50 HP, 480 V./3 ph, 13495 very low hours

215 cfm, 125 psi, Ingersoll Rand #SSR-EP50SE, 50 HP, 200 V., 3-phase, 43000 hrs

215 cfm, 125 psig, Ingersoll-Rand #UP6-50PE-125, 50 HP, no air receiver, air cooled, 2010

215 cfm, 190 psig, Kaeser #CNS74, 60 HP, serial #1059, 460 V., #1255

223 cfm, 140 psig, Ingersoll-Rand #SSR-HP60, 60 HP, serial #F539U92, 460 V., #1244

231 acfm, 100 psig, Champion Compressor #EW50, 50 HP, 3 phase, 460 V.

231 cfm, 190 psig, Kaeser #CNS-87, 75 HP, serial #1005, 460 V., #1257

235 acfm, 110 psig, Quincy #QSI-235-A, 50 HP, air cooled, skid mounted

235 cfm, 125 psig, Quincy #QSI-235, 50 HP, air end, rebuilt ready to exchange, w/oil pump

236 cfm, 125 psig, Kaeser #BSD-50-T, 50 HP, rotary screw air compressor, 4362 hrs, 2014

236 cfm, 125 psig, Kaeser #BSD50, air cooled, 50HP, 2565 RPM, 230/460 V., 3 ph, 2011, A-3252

238 cfm, 100 psi, Gardner-Denver #EBH99F, 50 HP, base mounted, enclosed, 2005

238 cfm, 100 psi, Gardner-Denver #EBHQJB, 50 HP, base mounted, enclosed

238 cfm, 100 psig, Gardner-Denver #ECHQJF, 50 HP, A/C, base mounted., 460 V.

240 cfm, 125 psi, Palatek #60DD, rotary air compressor, 60 HP, 6175 hours, #72442

AIR COMPRESSORS & ACCESSORIES:
AIR COMPRESSORS, ROTARY SCREW (Positive Displacement)