Browse:  Machinery Electrical
RSS Blog Surplus Record

GEAR REDUCERS, Without Driving Unit

In Stock Parts, your industrial parts resource
There are 822 listings in this category
Update: Sat, Nov 17, 2018 00:34:23
Advanced Search
Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added
 
 
Original Sort

.25 HP Stainless Motors Inc. #IL880C11TC163OHOBX, Planetary Reducers, 163:1 Gear Ratio, Frame 56F/TENV, #2792-83  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente
.75 HP @ 1100 RPM, Flender Himmel #KA80, Gear Drive, 108.41:1 Ratio, #36432  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1 HP @ 1140 RPM, David Brown #C0821250, Gear Box, 250:1 Ratio, 208-230/460 V., #41409  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1.34 HP @ 1750 RPM, Falk #06UCBN2A3.2AIC Ultra Mite Gear Reducer, 3.248:1 Ratio, #34952  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1.48 HP @ 1800 RPM, Winsmith #7MCVD, Gear Drive, 200:1 Ratio, Unused Storeroom Spare, #38828  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1.53 HP @ 1750 RPM, Morse Raider #325Q56L60, Gear Drive, 60:1 Ratio, #39931  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
2 HP @ 37 RPM, Falk #80BU1A, Gear Box, 24.50:1 Ratio, 1.5 RPM output, #41300  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
2 HP @ 1670 RPM, Flender Himmel #FDA100, Gear Drive, 181.39:1 Ratio, #36433  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
2 HP @ 1720 RPM, SEW Eurodrive #FA77/GDT90L4/BMG/HR/TF3, Gear Drive, 86:1 Ratio, #34166  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
2 HP @ 1725 RPM, Browning #W01-E458-N, Gear Drive w/Motor, 36.6:1 Ratio, 208-230/460 V., #39911  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
2 HP @ 1725 RPM, Falk # 525WVHM3A, Right Angle Gear Drive, 300:1 Ratio, unused, #16217  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
2 HP @ 1750 RPM, Dodge #210TM21A, Speed Reducer, 129.7:1 Ratio, 13 Rpm Output, 1.7 Service Factor, #34947  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
2.5 HP @ 1725 RPM, Perfection Gear #TLD520300C, Gear Drive, 300:1 Ratio, #34413  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
2.5 HP @ 1750 RPM input, Falk #ULTRAMITE-06UBB3A100A1B, 100:1 ratio, 208-230/460 V., #41451  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
2.5/6 HP @ 1750 RPM, Michigan Tool Company #UU-7500C-EK, Cone Gear Drive, 225:1 Ratio, #29964  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
2.74 HP @ 1200 RPM, Falk #3AP, 11.18 RPM output, 107.3 ratio, 1.25 Svc Factor  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
3 HP @ 1730 RPM, SEW Eurodrive #K77/RDV100M4BMG/HR/TF/E1A3, Gear Drive, 96.1:1 Ratio, #34168  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
3.4 HP @ 438 RPM, Rexnord #410Z47-BD, Variable Speed Drive, 4:1 Ratio, #29214  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
3.59 HP, Boston Gear #F732-15-B9-G, Gear Drive, 15:1 Ratio, Right Angle, Unused, #18572  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
3.8 HP @ 1750 RPM, Fmc Corp. #2947Y730-H, Inline Gear Reducer, 86.5:1 Ratio, 20 RPM output, #22290  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
4.43 HP @ 1750 RPM, Falk #4E3 concentric reducer, 57.66:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
5 HP @ 67 RPM, SEW Eurodrive #R77A, Gear Drive, 25.23:1 Ratio, #38382  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
5 HP @ 1150 RPM, Falk #2080YBXD3-AS, 177.2 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
5 HP @ 1725 RPM, Dayton #4Z719A, Speed Reducer, 12.5:1 Ratio, 140 output, #29131  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
5 HP @ 1750 RPM, Dodge #147DG3A, Gear Drive, 5.0:1 Ratio, 248 RPM output, #29130  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
5 HP @ 1750/2500 RPM, Falk #1020FC2A Enclosed Gear Drive, 2.172:1 Ratio, 803/1151 RPM output, #35370  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
5 HP @ 1750 RPM, Falk #2050YZ-L, Parallel Shaft Gear Reducer, 37.83:1 Ratio, 46.3 RPM output, 1990, #24077  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
5 HP @ 1755 RPM, Westinghouse, 47:1 ratio, 37 RPM out, #1269864  Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay
5 HP @ 1765 RPM, U.S. Varidrive, 8-80 RPM output, 220:1 ratio, #1270632  Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay
5 HP @ 1800 RPM, Falk #1040FC2A, Enclosed Gear Drive, 7.47:1 Ratio, 230 output, #30665  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
5 HP, Falk #40F2-25.64:1, 1040FD-46.19:1, 1080F3-195.5:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
5 HP, Sew #R70-14.24:1, K76-18.84-1, R80-25.08:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
5.38 HP @ 1750 RPM, Dodge Maxum #299091 VY, TCR4, 198.5:1 ratio, 8.81 RPM output, rebuilt   Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
5.4 HP @ 1730 RPM, SEW Eurodrive #FA87/GDV112M4/BMG/HR/TF3, Gear Drive, 86.5:1 Ratio, #34167  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
5.59 HP @ 1750 RPM, Falk #1050FC3A, Gear Drive, 70.89:1 Ratio, 25 RPM output, #41194  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
5.62 HP @ 1750 RPM, Fmc Corp. #2947Y130-W, Inline Gear Speed Reducer, 57.7:1 Ratio, #22289  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
6 HP @ 1750 RPM, Foote-Jones Dresser #575-100 WHA, 15.6 RPM output, 112.14:1 ratio  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
6 HP, Sterling Electrtic #2TBQ214056C, Reducer, 2:1 Ratio, #34509  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
6.43 HP @ 1750 RPM, Hub City #03TF, Gear Box, 25.266:1 Ratio, 60 RPM output, #29029  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
7 HP @ 1750 RPM, Dodge #184-SM3A-2.2-CI, Gear Box, 2.2:1 Ratio, 785 RPM Output, #29032  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
7 HP @ 1750 RPM, Falk #08UBBD3A100A1C Ultramite Speed Reducer, 98.080:1 Ratio, #34893  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
7.5 HP @ 58.3 RPM, Falk #1060FZ3A, parallel  RFQ
Row Electrical Eqpt Inc, Toledo, OH 800-248-4479 (Email: rowelec@glasscity.net) Jim / Dave
7.5 HP @ 155 RPM, Falk #7.52-3EZ2-06C5, Parallel Gear Drive, 11.28:1 Ratio, 1966, #29116  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
7.5 HP @ 1730 RPM, Dodge APG #180TG6A2, Gear Drive with Motor, 31.4:1 Ratio, 230/460 V., #39932  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
7.5 HP @ 1750 RPM, Falk #1060FZ3A, Gear Box, 46.59:1 Ratio, 27 RPM output, #41301  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
7.5 HP @ 1750 RPM, Falk #1060FZ3A, Gear Box, 46.59:1 Ratio, 37 RPM output, #41299  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
7.5 HP @ 1750 RPM, Falk #300MDXDF3AZS, Ram Gear Drive, 25.42:1 Ratio, 69 Rpm Output, 2011, #34896  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
7.5 HP @ 1750 RPM, Falk #7.52-50FZ2A, Enclosed Gear Drive, 24.89:1 Ratio, 68 RPM Output, #37938  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
7.5 HP @ 1750 RPM, Sm-Cyclo #2HC-3215/14, Gear Drive, 354:1 Ratio, #34039  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
7.5 HP @ 1765 RPM, Philadelphia #2CD1K, 17.65:1, reducer, 100 RPM out, in-line, #1269866  Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay
7.57 HP @ 1750 RPM, Falk #1020FC2, 2.658:1 ratio, concentric  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
7.85 HP @ 1750 RPM, Browning #C115SM15, Gear Drive, Shaft Mounted Speed Reducer, 14.573:1 Ratio, #38466  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
8.21 HP, Falk #1525WBM2A, Worm Reducer, 30:1 Ratio, #30903  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
8.7 HP @ 300 RPM, Cleveland #417F, Worm Gear Speed Reducer, 12:1 Ratio, #29179  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
8.7 HP @ 300 RPM, Cleveland #417F, Worm Gear Speed Reducer, 12:1 Ratio, Cast Iron, #29190  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
10 HP @ 490 RPM, Falk #60YB2-A, Right Angle Gear Drive, 9.375:1 Ratio, 52.2 RPM output, #25217  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
10 HP @ 845 RPM, Link Belt #DHL173, 50 RPM output, 16.9:1 ratio, #1271721  Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay
10/20 HP @ 1170/227 RPM, Falk #1110FC3A, Gear Box, 159.2:1 Ratio, 7.35/1.43 RPM output, #41305  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
10/20 HP @ 1170/227 RPM, Falk #1110FC3A, Gear Box, 159.2:1 Ratio, 7.35/1.43 RPM output, #41298  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
10 HP @ 1750 RPM, Falk #1030FC2A, Gear Drive, 11.54:1 Ratio, 155 output, #31320  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
10 HP @ 1750 RPM, Falk #1425WBM2A, 5:1 ratio, 1.5 SF, vert.input right angle, new, unused  Camera icon RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
10 HP @ 1750 RPM, Falk, Size 4EZ, w/scoop mount, 13.59:1 ratio, par (2 available)  RFQ
Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris
10 HP @ 1775 RPM, Falk #6D0A, Gearbox, 43.98:1 Ratio, 40.9 RPM output, (3) #24080  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
10 HP @ 1775 RPM, Falk #6D0A, Gearbox, 43.98:1 Ratio, 40.9 output, #34385  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
10 HP @ 1777 RPM, Dodge #250DM5A, Gear Reducer, 11.4:1 Ratio, #33686  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
10 HP, Falk #1030FZ2A, Enclosed Gear Drive, 5.201:1 Ratio, 1.0 Service Factor, #37939  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
10 HP, Falk #6E3-73.71, 1030F2-14:1, 2040F3-38.08:1, 1050F2-30.69:1, 2050F3-68.61:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
10.58 HP, Falk #600VECM3S Omnibox Right Angle Gear Drive, 20:1 Ratio, #11278  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
11.2 HP @ 1750 RPM, Foote Jones #734YSL concentric reducer, 57.5:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
11.5 HP @ 1150 RPM, Jones #120/DH, Gear Drive, 20.8:1 Ratio, #34088  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
11.9 HP @ 1750 RPM, Falk #1030FC2A, Gear Drive, 11.54:1 Ratio, 155 output, #31321  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
11.9 HP @ 1750 RPM, Hub City #210-D-M-5-A-1, Gear Drive, 25.6:1 Ratio, 68 RPM output, Storeroom Spare, #39887  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
12.3 HP @ 1750 RPM, Rexnord #Polaris, 295.7:1 ratio, inline, unused  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
14.8 HP @ 2116 RPM, Dodge #SCXT205, Torque-Arm Speed Reducer, 5.29:1 Ratio, #31247  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
15 HP @ 725/1800 RPM, Falk #2070Y2-KS, 42.69:1 ratio, 1.03/2 SF, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
15 HP @ 1750 RPM, Falk #1040FZA, Par, 1.84 ratio, 950 RPM output  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
15 HP @ 1750 RPM, Falk #7DOA, Parallel Shaft Gear Reducer, 32.39:1 Ratio, 54.3 RPM output, #24078  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
15 HP @ 1750 RPM, Sumitomo #CHH-6190Y-15, Gear Drive, 15:1 Ratio, #35424  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
15 HP @ 1750 RPM, Sumitomo #CHHBS15A-4255DBY-165 Cyclo Variator, 165:1 Ratio, #35218  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
15 HP @ 1765 RPM, Reeves, vari-speed 24-190 RPM out, 20.9:1 ratio, #0536117  Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay
15 HP @ 1800 RPM, Falk #8RA, Parallel Shaft Gear Reducer, 79.72:1 Ratio, 22.6 output, #24079  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
15 HP, Falk #4C2-9.27:1, 5E2-25.66:1, 1030F2-7.69:1, 1050F2-25.22:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
15 HP, Hub City #1010, 2:1 ratio, R.A.  RFQ
Alfred L Brown Assoc Inc, Auburn, MA 508-754-5382 (Email: sales@alfredlbrown.net) Charles Gaspie
15 HP, SEW Eurodrive, 18.19:1 ratio, right angle, flange mount, KF96LP254TC (2 available)  RFQ
Electric Motors & Drives Inc, Anderson, SC 864-224-6623 (Email: sales@emd-inc.com) Dave Cothran
15.1 HP @ 1750 RPM, Rexnord #Earth, 159.8:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
15.9 HP @ 228 RPM, Falk #1030FC2A, 7.691:1 ratio, parallel (2 available)  RFQ
Row Electrical Eqpt Inc, Toledo, OH 800-248-4479 (Email: rowelec@glasscity.net) Jim / Dave
17.1 HP @ 1750 RPM, Falk #1040F2, concentric shaft, 11.2:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
17.1 HP, Dodge #TXM300, Gear Drive, 16.92:1 Ratio, 103.43 output, #33732  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
17.6 HP @ 1750 RPM, Sm-Cyclo #CHH-6160Y-17, Gear Drive, 17:1 Ratio, #33427  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
18 HP @ 1750 RPM, Boston #H-27, ratio, used  RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
20 HP @ 100 RPM, Falk #202-6EZ2-06A7, Motor Reducer, 17.51:1 Ratio, Rebuilt Storeroom Spare, #34895  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
20 HP @ 728 RPM, Falk #50YB2-A, Right Angle Drive, 6.282:1 Ratio, 115 RPM output, #25220  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
20 HP @ 1150/2300 RPM, Falk #2050Y1A, 6.267:1 ratio, 1.52 SF, parallel  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
20 HP @ 1150 RPM, Horsburgh & Scott #110TSP, 106.5:1 ratio, 1.06 SF (2) #939  Spec Sheet RFQ
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner
20 HP @ 1200 RPM, Falk #2050Y82, Enclosed Gear Drive, 6.225:1 Ratio, 192.8 output, #30663  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
20 HP @ 1200 RPM, Falk #2050YB2-L, Gear Drive, 6.225:1 Ratio, 192.77 output, #30670  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
20 HP @ 1200 RPM, Falk #2090FC3B, Gear Drive, 69.86:1 Ratio, 17 RPM output, #41268  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
20 HP @ 1200 RPM, Falk #2090FC3B, Gear Drive, 69.86:1 Ratio, 17 RPM output, #41261  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
20 HP @ 1450 RPM, Link-Belt, Size BT-4200-62, 264:1 ratio, offset par (2 available)  RFQ
Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris
20 HP @ 1750 RPM, Falk #2307J, shaft mount, 9.0:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
20 HP, Falk #1030F2-5.2:1, 2040F2-19.81:1, 1070F3-56.63:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
20 HP, Nuttall #R430, Gear Drive, 4.128:1 Ratio, 424 Output RPM, #35018  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
20 HP, Westinghouse #43D, Gear Drive, 4.128:1 Ratio, 535 RPM Output, storeroom spare, #34953  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
20.8 HP @ 1750 RPM, Falk #2070FC3A, 86.43:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
23 HP @ 1750 RPM, Falk #1040FC2, 7.479:1 ratio, concentric  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
23.35 HP @ 175 RPM, Grove Gear #256TC, 10:1 ratio  RFQ
Mid-West Machinery Mart Inc, Indianapolis, IN 317-357-2336 (Email: Nateelectricmotor@yahoo.com) Nathan Clark
24 HP @ 1750 RPM, Falk #50BULA, 5.167:1 ratio, 10.5 RPM output  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
24.3 HP @ 1750 RPM, Falk #70F2, concentric shaft, 31.08:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
25 HP @ 83 RPM, Falk #RK1060F2A, 21.09:1 ratio, parallel  RFQ
Row Electrical Eqpt Inc, Toledo, OH 800-248-4479 (Email: rowelec@glasscity.net) Jim / Dave
25 HP @ 84 RPM, Falk #2080FCAT, 21.13:1 ratio, parallel  RFQ
Row Electrical Eqpt Inc, Toledo, OH 800-248-4479 (Email: rowelec@glasscity.net) Jim / Dave
25 HP @ 500 RPM, Westinghouse #DH, Parallel Shaft Gear Drive, 13.8:1 Ratio, #29092  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
25 HP @ 1150 RPM, Falk #1050FC2A, Gear Drive, 6.135:1 Ratio, 187 RPM output, #35223  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
25 HP @ 1750 RPM, Falk #400MDXD2A211, Ram Gear Drive, 21.19:1 Ratio, 83 RPM output, 1.25SF, #36890  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
25.2 HP @ 640 RPM, Cleveland #215, Worm Gear Speed Reducer, 10:1 Ratio, #29127  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
25.2 HP @ 640 RPM, Cleveland #283F, Worm Gear Speed Reducer, 10:1 Ratio, #29180  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
25.8 HP @ 1750 RPM, Falk #1060F2, concentric shaft, 31.42:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
26 HP @ 1750 RPM, Falk #09UCBN2-A22N, Gear Drive, 22.87:1 Ratio, #38379  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
27 HP, Falk #2110YB3, right angle, 60.82:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
28.3 HP @ 1750 RPM, Rexnord #Earth, 80.01:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
30 HP @ 1170 RPM, Falk #2050YB2-L, Enclosed Gear Drive, 9.53:1 Ratio, 122.8 RPM output, 1.84 Service Factor, #34877  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
30/20 HP @ 1200/800 RPM, Falk #385AB3-A, Gear Box, 46.32:1 Ratio, 25.9/17.3 output, #34407  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
30/20 HP @ 1200/1800 RPM, Falk #385AB3-A, Enclosed Gear Drive, 46.32:1 Ratio, #34376  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
30 HP @ 1750 RPM, American Standard Gyrol Size 107 type V2 Class 2, vari-speed 0-190 RPM output, #0505152  Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay
30 HP @ 1750 RPM, Falk #2080FZ3A, Gear Drive, 47.08:1 Ratio, 37 RPM output, #35575  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
30 HP @ 1750 RPM, Falk #RK2080F3A, Gear Drive, 47.230:1 Ratio, 37 RPM output, #35574  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
30 HP, Falk, 36.65:1 ratio  RFQ
East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Email: info@eastcoastmotor.com) Pearce/ Boykin
30.1 HP @ 1750 RPM, Falk #2080FZ3A, 38.88:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
30.2 HP @ 1750 RPM, Falk #2080FC3A, 87.65:1 ratio, inline, unused  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
30.3 HP @ 360 RPM, #1080FCB3AS, 360 RPM, 3.1784:1 ratio, 113 RPM output (4 available)  RFQ
Peak Machinery Inc, Blaine, MN 612-810-1955 (Email: randy@peakmachinery.com) Randy Bayless
31.9 HP @ 2118 RPM, Dodge #TXT415AT, Gear Drive, 15.31:1 Ratio, #38463  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
32.5 HP @ 1730 RPM, Sm-Cyclo #HPC3180, Gear Drive, #28935  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
32.55 HP @ 580 RPM, Xtek #510, 30.8:1 ratio, parallel, 19 RPM output  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
33 HP @ 1750 RPM, Falk #2060GHB, 5.083:1 ratio, right angle  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
35 HP @ 575 RPM, Falk #209072-S, 18.84:1 ratio, 1.46 SF, parallel  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
35 HP @ 595 RPM, Philadelphia #318TS, 5.6 RPM output, 106:1 ratio, 1.5 Svc Factor, rebuilt   Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
35.7 HP @ 1750 RPM, Foote-Jones #HYP-0-60-R-5, 5:1 ratio, 350 RPM output, surplus  Camera icon RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
37.3 HP @ 580 RPM, Cleveland #215, Worm Gear Speed Reducer, 10:1 Ratio, #29181  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
38.4 HP @ 1750 RPM, Rexnord #Earth, 54.45:1 ratio, inline, unused  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
39 HP, Falk #2060Y2, 30.92:1 ratio, new  Camera icon RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
40 HP @ 1170 RPM, Falk #80Y02-A, Enclosed Gear Drive, 16.81:1 Ratio, 68 RPM output, 1.27SF, rebuilt storeroom spare, #34879  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
40 HP @ 1200 RPM, Falk #2090FC3, Gear Box, 69.86:1 Ratio, 17 RPM output, #41315  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
40 HP @ 1200 RPM, Falk #2090FC3B, Gear Drive, 69.86:1 Ratio, 17 RPM output, #41267  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
40 HP @ 1200 RPM, Falk #2090FC3B, Gear Box, 69.86:1 Ratio, 17 RPM output, #41303  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
40 HP @ 1200 RPM, US Varispeed #VEU, vari-speed 470-1880 RPM output, #0522602  Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay
40 HP @ 1750 RPM, Falk #1060FZ3A, Gear Box, 103.3:1 Ratio, 16.94 RPM output, #41294  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
40 HP @ 1750 RPM, Falk #1060FZ3A, Gear Box, 103.3:1 Ratio, 16.94 RPM output, #41294  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
40 HP @ 1750 RPM, Falk #1100FC3A, 70.32:1 ratio, inline, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
40 HP @ 1750 RPM, Falk #2060Y2, parallel shaft, 31.98:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
40 HP @ 1750 RPM, Falk #2177YN4-S, 772:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
40 HP @ 2183 RPM, Falk #403-1070FZB3, Gear Box, 11.43:1 Ratio, 191 output, #33458  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
40.5 HP @ 1750 RPM, Horsburgh & Scott #Mark II, Helical Speed Reducer, 145.7 ratio  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
41.1 HP @ 1750 RPM, Sumitomo #CHHP-61807-17 Cyclo 6000 Gear Drive, 17:1 ratio, #41413  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
41.4 HP @ 1750 RPM, Westinghouse #78D, concentric reducer, 36.94:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
42.7 HP, SM-Cyclo, 43:1 ratio, new  RFQ
North Carolina Motors & Contr, Bailey, NC 800-849-6686 (Email: ncmc@ncmotorsandcontrols.com) Richard/ Ike
44.7 HP @ 1750 RPM, Falk #2040FC2A, Gear Box, 7.368:1 Ratio, #34084  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
45 HP @ 1750 RPM, Textron #HV120A156-3, 30.0:1 ratio, 1.0 SF, right angle  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
45 HP, Falk #1080F3-39.6:1, 2080F3-57.56:1, 2080Y2-45.84:1, 1050FB3-3.42:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
45 HP, Falk #2080Y2, 45.84:1 ratio, New  Camera icon RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
46 HP @ 1750 RPM, Falk #1070FC2, 25.12:1 ratio, concentric  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
46 HP @ 1750 RPM, Lufkin #S63A, 3063 RPM out, 1.75:1 ratio, 2.28 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
46 HP @ 1800 RPM, Sumitomo #PARAMAX7, Parallel Shaft Gear Drive, 32.876:1 Ratio, 1996, #25225  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
46.8 HP @ 1750 RPM, Falk #1050F2, concentric shaft, 7.584:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
47.2 HP @ 1750 RPM, Falk #1110FC3A, 103.3:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
48 HP, Falk #2080Y2-LS, 40.865:1 ratio, new  Camera icon RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
48.1 HP @ 1750 RPM, Philadelphia In-Line-Par., 56.42:1 ratio, 30 rpm Output, Size 9, (2 available)  RFQ
Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris
49.7 HP @ 1750 RPM, Rexnord #Earth, 31.63:1 ratio, inline, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
50 HP @ 870 RPM, Falk #2090YB2-A, Enclosed Gear Drive, 11.61:1 Ratio, 74.9/9.6 output, #29730  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
50 HP @ 870 RPM, Falk #2090YB2-A, Right Angle Drive Gearbox, 74.9 output, #29697  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
50 HP @ 1170 RPM, Falk #2100Y2-L, 38.08:1 ratio, 30.7 RPM output, 1.73 Svc Factor  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
50 HP @ 1200 RPM, Falk #2050YB2-L, Enclosed Gear Drive, 7.583:1 Ratio, 158.2 output, #30666  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
50 HP @ 1250 RPM, Falk #2179ZN4-S, 768.7:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
50 HP @ 1750 RPM, Falk #1060FZ3, 6.14:1 ratio, 280 RPM output (5 available)  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
50 HP @ 1750/2300 RPM, Falk #60Y1-A, Gear Drive, 5.095:1 Ratio, 343.3/451.4 RPM output, #38679  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
50 HP @ 1750/2300 RPM, Falk #60Y1-A, Gear Drive, 5.095:1 Ratio, 343.3/451.4 RPM output, #38687  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
50 HP @ 1750 RPM, Sm-Cyclo #CHH6215Y-59, 5.3:1 Ratio, #29369  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
50 HP @ 1873 RPM, Falk #2060GHB-KS, Enclosed Gear Drive, 5.083:1 Ratio, 368.4 RPM output, rebuilt, #34955  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
50 HP, Falk #100YZ-S, 8.47:1 ratio (2 available)  RFQ
Weeks Marine Inc, Cranford, NJ 908-272-4010 (Email: vplynch@weeksmarine.com) Vinnie Lynch
50 HP, Falk #2060FC2A, Inline Gear Drive, 4.218:1 Ratio, unused, #17167  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
50 HP, Nuttall #90R55384, 42.573:1 ratio, 1.5 SF parallel shaft gear reducer  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
50 HP, Nuttall Gear #92R57007, Gear Drive, 24.957:1 Ratio, 683 Output, #30868  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
50 HP, Radicon #7AU12, Speed Reducer, #33062  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
50.4 HP @ 1150 RPM, Cone #120HV, worm gear, 50:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
50.7 HP, SM-Cyclo, 29:1 ratio, 1.0 SF, new  RFQ
North Carolina Motors & Contr, Bailey, NC 800-849-6686 (Email: ncmc@ncmotorsandcontrols.com) Richard/ Ike
52.2 HP @ 1750 RPM, Falk #4315J, 25:1 ratio, shaft mount  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
53 HP @ 153 RPM, Falk #GC202A5, concentric, unused  RFQ
Row Electrical Eqpt Inc, Toledo, OH 800-248-4479 (Email: rowelec@glasscity.net) Jim / Dave
53 HP @ 2010 RPM, Dodge #TXT625T, Gear Drive, Torque Arm Speed Reducer, 25.13:1 Ratio, #38447  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
53 HP, Bonfiglioli #RAO90/SN-R.S, Gear Drive, 22.65:1 Ratio, 1993, #34421  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
53.8 HP @ 1750 RPM, Sumitomo #H3265/189, 121:1 ratio, 200000 in/lbs rated  RFQ
Duke Electric Ltd, Hamilton, ON 905-547-9171 (Email: Daniel.raab@dukeelectric.com) Daniel Raab
54.1 HP @ 1750 RPM, Falk #1130FZ3A, 156.1:1 ratio, inline, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
54.7 HP @ 1750 RPM, Textron #UU70-150-A1, Cone Gear Drive, 375:1 Ratio, Storeroom Spare, #38814  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
55 HP, Falk #2050YB2-14.4:1, 1070F2-20.53:1, 2100Y3-58.13:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
56 HP, Falk #2070Y2, 31.32:1 Ratio, New  Camera icon RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
57.3 HP @ 1750 RPM, Rexnord #Earth, 36.56:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
58 HP @ 1750 RPM, Philadelphia #6HL2, concentric shaft, 6.218:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
59 HP @ 1750 RPM, Dodge Quantis #BR1283SM180, 12.56:1 ratio, 1.0 SF, rebuilt  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
60 HP @ 1375 RPM, Falk #345A2-A, Parallel Shaft Gear Reducer, 16.00:1 Ratio, 85.9 RPM Output, 1992, #25664  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
60 HP @ 1750 RPM, Falk #425A4-A, 126.2:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
60 HP @ 1830 RPM, Falk #6C2-02A3, Enclosed Gear Drive, 7.645:1 Ratio, 230 RPM output, 1974, #25974  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
60/15.4 HP, Falk #2090GHB1-A, Gear Drive, 3.368:1 Ratio, 174/45 output, #30669  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
60 HP, Westinghouse #SHR-2, Gear Drive, 7.61:1 Ratio, #30552  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
60.6 HP @ 1750 RPM, Falk #2080Y2L, 38.82:1 ratio, parallel (5 available)  Camera icon Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
61 HP @ 478 RPM, Falk #2090GHB1-KS, Enclosed Gear Drive, 3.368:1 Ratio, 141.9 output, #30664  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
61.16 HP @ 1750 RPM, Rexnord #Neptune, 80.01:1 ratio, inline, unused  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
61.3 HP, SM-Cyclo, 29:1 ratio, 1.0 SF, new  RFQ
North Carolina Motors & Contr, Bailey, NC 800-849-6686 (Email: ncmc@ncmotorsandcontrols.com) Richard/ Ike
63 HP, Falk #2090Y2-LS, 46.49:1 ratio, new  RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
63.2 HP @ 1750 RPM, Falk #2050FZ2A, Gear Drive, 11.39:1 Ratio, 153 RPM output, 2003, #28029  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
64.0 HP @ 1750 RPM, Rexnord #Polaris, 54.45 ratio, inline, rebuilt  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
65 HP, Falk #60Y1-6.11:1, 5GHC-3.8:1, 1060F2-9.11:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
67 HP, Falk #2080Y2, 35.16:1 Ratio, New  Camera icon RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
68 HP @ 1750 RPM, Philadelphia #3409-BT, right angle, 3.38:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
72 HP @ 1750 RPM, Dorris #8311-LHB/L, 11.408:1 ratio, 1.0 SF, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
72.3 HP @ 1750 RPM, Falk #2090FC3A, 57.53:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
74 HP @ 1750 RPM, Falk #60YB2, right angle, 7.654:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
75 HP @ 1000 RPM, Falk #2080Y1-LS, 3.318:1 Ratio, 301.4/90.4 output, 4.89SF, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, St. Louis Park, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman
75 HP @ 1000/300 RPM, Falk #2080Y1-LS, 3.31:1 Ratio, 301.4/90.4 output, 4.89 S.F., reblt.  Camera icon Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, St. Louis Park, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman
75 HP @ 1150 RPM, Falk #305A1-A, Par, 2.722 ratio, 423 RPM output  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
75 HP @ 1150 RPM, Western, 12.7:1 ratio, off set par, Size D56  RFQ
Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris
75 HP @ 1250 RPM, Falk #2050Y1-LD, Par, 3.07 ratio, 406 RPM output  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
75 HP @ 1750 RPM, Falk #2080GHB1-A, 5.083:1 ratio, 344 RPM output  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
75 HP @ 1750 RPM, Falk #2080GHB1-KD, 5.083 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
75 HP, Nuttall #RB76D, 9.3:1 ratio, 350 RPM output, 3.33 Svc Factor  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
75 HP, Falk #345A2-A, Parallel Shaft Gear Reducer, 10.34:1 Ratio, 1999, #24154  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
75 HP, Foote Jones #1803, gear reducer, 38.72:1 ratio, serial #416881-68, #11870  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
J & M Industrial Inc, Millwood, WV 304-273-0795 (Email: equip@jmindustrial.com) Sheldon Sharp
75 HP, Nuttall Gear #95R60450, Gear Drive, 7.294:1 Ratio, 253.63 Output, #30869  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
75.7 HP @ 1600 RPM, Pittsburgh Gear #92609, 104.4853:1 ratio, 1.01 SF, parallel  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
76 HP @ 1750 RPM, Rexnord #Polaris, 43.78:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
76 HP, Falk #2080Y2-LS, 31.08:1 Ratio, new  Camera icon RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
76.4 HP @ 1750 RPM, Rexnord #Polaris, 31.63:1 ratio, inline, unused  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
77.5 HP @ 802.5 RPM, Falk #107ZB2-S, 6.224 Ratio, 128.94 RPM output, 2.27SF, 1994  Camera icon Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, St. Louis Park, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman
77.7 HP @ 1750 RPM, Falk #1100FC3A, 47.50:1 ratio, inline, unused  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
77.7 HP @ 1750 RPM, Falk #2080FZ2AA, 31.15:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
78.9 HP @ 860 RPM, Foote Bros., size 150DX, 16:7 ratio, 52 RPM out, offset par (4 available)  RFQ
Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris
80 HP, Falk #6GDB-5.7:1, 2050Y1-6.93:1, 80Y1-7.47:1, 80F2-11.55:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
81.7 HP @ 1750 RPM, Rexnord #Earth, 24.00:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
83 HP @ 1750 RPM, Falk #11090F2A, 30.42:1 ratio, concentric  RFQ
Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Email: Phansen@mardustrial.com) Paul Hansen
89 HP @ 1730 RPM, Falk #2060YIA, 5.056:1 ratio, 1.43 SF (2 available)  RFQ
Rotation Power & Equipment, Neilburg, SK 877-823-4818 (Email: mel@rotationpower.com) Mel Dueck
91 HP @ 1800 RPM, Winsmith #5MCTD, Gear Drive, 150:1 Ratio, #39907  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
95 HP, Falk #2050YB2-8.233:1, 2060YB2-13.4:1, 2110YB3-60.82:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
96 HP @ 1750 RPM, Falk #1080FC2A, 9.08:1 ratio, parallel, 190 RPM output  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
96.7 HP, SM-Cyclo, 11:1 ratio, 1.0 SF, new  RFQ
North Carolina Motors & Contr, Bailey, NC 800-849-6686 (Email: ncmc@ncmotorsandcontrols.com) Richard/ Ike
97 HP, Falk #2100Y2-LS, 47.189:1 Ratio, new  Camera icon RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
98.7 HP @ 1750 RPM, Falk #2090FC3A, 39.31:1 ratio, inline, unused  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
99.13 HP @ 1750 RPM, Rexnord #Neptune, 43.78:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
100 HP @ 32 RPM, Foote Jones / Dresser, cat. #1203-HLEX, offset parallel  RFQ
Row Electrical Eqpt Inc, Toledo, OH 800-248-4479 (Email: rowelec@glasscity.net) Jim / Dave
100 HP @ 670/8.46 RPM, Falk, 79.279:1 ratio, offset par  RFQ
East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Email: info@eastcoastmotor.com) Pearce/ Boykin
100 HP @ 1150 RPM, D.O. James #180-HS, 6.06:1 ratio, 1.11 SF, parallel  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
100 HP @ 1150 RPM, Falk #2050Y1-LD, Enclosed Gear Drive, 2.759:1 Ratio, 416.8 RPM output, 1.9SF, rebuilt, #34878  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
100 HP @ 1200 RPM, Falk #80Y1S, Parallel Shaft Gear Reducer, 4.84:1 Ratio, 249.9 RPM output, #25226  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
100 HP @ 1200 RPM, Sumitomo #PDH9065, 42.9:1 ratio, 28 RPM output (5 available)  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
100 HP @ 1200 RPM, Western, 48.0:1 ratio, parrallel shaft  RFQ
Erie Mill & Press Co Inc, Erie, PA 814-454-1581 (Email: jan@empco-inc.com) John A. Nowak
100 HP @ 1300 RPM, Horsburgh & Scott #Mark-II, Helical Speed Reducer, 8.793:1 Ratio, #29093  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
100 HP @ 1303 RPM, Falk #2050Y1-L, 3.074:1 Ratio, 423.9 output, 1.54 S.F., new 2016  Camera icon Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, St. Louis Park, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman
100 HP @ 1450 RPM, Falk #425A3-C, 20.5 RPM output, 69.41 ratio, 1.27 Service Factor  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
100 HP @ 1750 RPM, Falk #2090YBXD2-AS, 13.91:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
100 HP @ 1750/2000 RPM, Nuttall #90R55385, 41.874:1 ratio, 1.5 SF, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
100 HP @ 1785 RPM, Falk #485AB4-CS, 175.4 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
100 HP, Westinghouse #D11H, 14.108 ratio, 125 RPM out, 1.98 SF, 82R55090, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
River City Industrial Inc, Chattanooga, TN 423-821-4712 (Email: kVA@RiverCityIndustrial.com) Philip Mantel
100 HP, Falk #2070YN2-LB, Right Angle Gear Reducer, 15.15:1 Ratio, 1989, #26318  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
100 HP, Falk #7CBA3, right-angle-double-shaft, 2.46:1 ratio (10 available)  RFQ
Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris
100 HP, Falk #80Y1-A, Gear Reducer, Parallel Shaft, 4.577:1 Ratio, #  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
100 HP, Nuttall #90R55385, 41.874:1 ratio, 1.5 SF, parallel shaft gear reducer  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
100 HP, Nuttall #90R55386, 42.819:1 ratio, 1.58 SF, parallel shaft gear reducer  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
100 HP, Nuttall Gear #S7F Gearbox, Gear Drive, 3.391:1 Ratio, 516 Output, #30866  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
101 HP, SM-Cyclo, 15:1 ratio, 1.0 SF, new  RFQ
North Carolina Motors & Contr, Bailey, NC 800-849-6686 (Email: ncmc@ncmotorsandcontrols.com) Richard/ Ike
104 HP @ 870 RPM, Falk #8GHB, obsolete right, 5.2:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
104 HP @ 1750 RPM, Falk #120FC3A, 38.05:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
104 HP @ 1750 RPM, Falk #7GHB, 3.529:1 ratio, right angle  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
107 HP @ 1750 RPM, Rexnord #Earth, 20.41:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
108 HP @ 1750 RPM, Dodge Maxum #TCR11, ID 299229 HA, 16.4 RPM output, 106.8:1 ratio  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
108 HP @ 1750 RPM, Falk #2135Y2-B, 45.56:1 ratio, parallel, rebuilt  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
110 HP @ 1100 RPM, Foote-Jones Powertech #2803-HLD, 1.5 SF, 182.98:1 ratio, rebuilt  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
111 HP @ 1750 RPM, Rexnord #Polaris, 24.00:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
112 HP, Hansen #JFN93C, Gear Drive, Unused Storeroom Spare, #38165  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
114 HP @ 1170 RPM, Falk #130FC2A-30.25, Enclosed Gear Drive, 30.25:1 Ratio, 37 output, 1979, #12665  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
115 HP @ 1800 RPM, Lufkin #S105, 4.55:1 ratio, #50613  Camera icon Visit Dealer's Equipment Listings  RFQ
Power Zone Equipment, Center, CO 719-754-1981 (Email: jay@powerzone.com) Jay Osmon
115 HP, Falk #2060Y2-9.968:1, 2100YB2-27.6:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
116 HP @ 1750 RPM, Falk #2125-Y3-LD, 86.81:1 ratio, parallel, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
117 HP @ 4500 RPM, Terry #O, 5.11:1 ratio  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
119 HP @ 1750 RPM, Dodge, 11:1 ratio, 154 output, parallel, new surplus  RFQ
Rogers Equipment Sales Inc, Durango, CO 800-990-7374 (Email: res@frontier.net) Jeff/ Joey/Cale
119 HP @ 1750 RPM, Dodge, size DCR6, 11.37:1 ratio, 154 RPM output (2 available)  Camera icon RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
120 HP @ 1750 RPM, Falk #1130F3A, 69.12:1 ratio, concentric  RFQ
Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Email: Phansen@mardustrial.com) Paul Hansen
121 HP, Nuttall, angle right-left, 39.397:1 ratio, new (2 available)  RFQ
North Carolina Motors & Contr, Bailey, NC 800-849-6686 (Email: ncmc@ncmotorsandcontrols.com) Richard/ Ike
122 HP @ 1750 RPM, Foote-Jones, Frame 1502-HLD, 37.15 ratio, 1.53 Svc Factor, rebuilt  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
125 HP @ 1150 RPM, Western, 12.9:1 ratio, off set par, Size D58  RFQ
Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris
125 HP @ 1750 RPM, Brad Foote, 13.56:1 ratio, 1.67 SF, 850 RPM out, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
125 HP @ 1750 RPM, Falk #2080Y2, Gearbox, 9.281:1 Ratio, 188.5 output, 1.38 S.F.  Camera icon Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, St. Louis Park, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman
125 HP @ 1750 RPM, Hansen #RDF44, right angle, 90:1 ratio, never used  Camera icon Spec Sheet RFQ
Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Charlie Peterson
125 HP, Westinghouse #S9H, 105/23 ratio, 276 RPM out, 1.63 SF, 80R18961, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
River City Industrial Inc, Chattanooga, TN 423-821-4712 (Email: kVA@RiverCityIndustrial.com) Philip Mantel
125 HP, Falk #130Y1A, Parallel Shaft Gearbox, 6.160:1 Ratio, #10471  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
125 HP, Falk #2080Y1B, Parallel Shaft Gearbox, 6.231:1 Ratio, Parallel Shaft, #20933  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
125 HP, Falk #Nuttall-D9, Enclosed Gear Drive, 4.22:1 Ratio, 272 RPM output, #34876  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
125 HP, Nuttall #S9, Gear Drive, 2.760:1 Ratio, Rebuilt Storeroom Spare, #34963  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
125 HP, Western #S-63B, Gear Drive, 7.727:1 Ratio, Rebuilt By Prager, #35089  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
126 HP @ 1750 RPM, Falk #90YB2, right angle, 13.87:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
126 HP @ 1750 RPM, Hansen #QVRH4-CUN-200, 200.85:1 ratio, right angle LS UP (2 available)  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
126 HP @ 1750 RPM, Hansen #QVRH4-CUN-200, 200.85:1 ratio, right angle UP (2 available)  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
126 HP @ 1770 RPM, Falk #2100Y2-S, 20.37:1 ratio, 1.44 SF (2 available)  RFQ
Rotation Power & Equipment, Neilburg, SK 877-823-4818 (Email: mel@rotationpower.com) Mel Dueck
128 HP, Bonfiglioli #A6-90, Gear Box, 6.11:1 Ratio, Storeroom Spare, #34404  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
130 HP @ 1214 RPM, Falk #98-067347-01, Parallel Shaft Gear Reducer, 4.222:1 Ratio, 287 RPM output, 1998, #22832  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
133 HP @ 1750 RPM, Paramax #PHD910094-LR-224, 222:1 ratio, 2.1 SF, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
134 HP, Beloit Size 3 differential drive w/P.I.V.  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
135 HP @ 1750 RPM, Rexnord #Orion, 69.63:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
135 HP, Western, Gear Box, 2.0:1 Ratio, #33414  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
140 HP @ 1750 RPM, Horsburgh & Scott, size 140-T, 45.29:1 ratio, offset par.  RFQ
Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris
140 HP, Falk #2100Y2, 34.899:1 Ratio, New  Camera icon RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
140 HP, Falk #2110Y2-LS, 40.64:1 Ratio, New  Camera icon RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
141 HP @ 1750 RPM, Falk #2110YB3A, 38.92:1 ratio, right angle  Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
142 HP @ 1780 RPM, Lufkin #N1007C, 178 RPM out, 10:01 ratio, 2.10 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
143.25 HP @ 1750 RPM, Rexnord #Neptune, 31.63:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
148 HP @ 1750 RPM, Dodge #DR1100A, 31.4:1 ratio, in-line-par  RFQ
Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris
148 HP @ 1750 RPM, Pittsburgh Gear #KD200F, 14.4222:1 ratio, 1.79 SF, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
149 HP @ 1750 RPM, Falk #2080FC2A, 17.34:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
149 HP @ 1750 RPM, Falk #2080FZ2AB, 17.34:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
150 HP @ 175 RPM, Farrel #SR, 1160 RPM out, 6.628:1 ratio, 1.00 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
150 HP @ 580 RPM, Philadelphia #10-HB-2, Gearbox, 9.3:1 Ratio, 62 output, #29695  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
150 HP @ 910 RPM, Lufkin #S2212CH, Gear Box w/ITT Standard Shell & Tube Heat Exchanger, 3.576:1 Ratio, #38492  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
150 HP @ 1150 RPM, D.O. James #210-HS, 6.37:1 ratio, 1.07 SF, parallel  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
150 HP @ 1170 RPM, Falk #2070Y1-L002, Gear Box, 3.065:1 Ratio, 381.7 Output, #33042  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
150 HP @ 1200 RPM, Falk #2070YB2-L, Enclosed Gear Drive, 6.806:1 Ratio, 176.3 output, #30679  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
150 HP @ 1243 RPM, Falk #2080Y1-LD, Gear Drive, 4.588:1 Ratio, 270.9 RPM output, #35019  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
150 HP @ 1355 RPM, Falk #2060YI-LD, Gear Box, 2.793:1 Ratio, 485.2 RPM output, #41029  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
150 HP @ 1500 RPM, Link Belt #R-C225-12HK-1-I-II-3.5, Parallel Shaft Right Angle Speed Reducer, 3.5:1 Ratio, 482.6 RPM, #34929  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
150 HP @ 1750 RPM, Falk #1080FC2A, 11.33:1 ratio, parallel, 155 RPM output (2 available)  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
150 HP @ 1750 RPM, Falk #405ABRCM3, 15.99:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
150 HP @ 1750 RPM, Falk #8C2, 9.272 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
150 HP @ 1750 RPM, Nuttall Gear #DVR10, Inline Gear Drive, 10.15:1 Ratio, 172.4 Rpm Output, Rebuilt, 2009, #34924  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
150 HP @ 1760 RPM, Terry #M, 7543 RPM out, 4.285:1 ratio, 1.00 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
150 HP @ 1775 RPM, Browning, Parallel Shaft Gear Drive, 2.269:1 Ratio, 4.027 RPM output, 1986, #25222  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
150 HP @ 1800 RPM, Westech #2592, 13.1:1 ratio, 140 RPM output, shaft up  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
150 HP @ 1877 RPM, Lufkin #S64CH, Gear Drive, 4.217:1 Ratio, #38242  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
150 HP, Westinghouse #S12H, 123/2.0 ratio, 219 RPM out, 2.0 SF, 80R18988, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
River City Industrial Inc, Chattanooga, TN 423-821-4712 (Email: kVA@RiverCityIndustrial.com) Philip Mantel
150 HP, Falk #2070Y1-4.92:1, 70Y2-10.88:1, 2080Y1-7.47:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
150 HP, Lufkin #S85CH, Gear Box, 3.966:1 Ratio, Rebuilt Storeroom Spare, #38216  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
150 HP, Nuttall Gear #D11, Gear Drive, 15.387:1 Ratio, 117 Output, #30848  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
155 HP @ 1750 RPM, Hansen #QHPB2-RLN-11.2., 11.422:1 Ratio, Parallel  Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
160 HP @ 762 RPM, Horsburgh & Scott #360T, 159:1 ratio, 1.5 SF, 3189000 in./#torque  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
169 HP @ 1750 RPM, Falk #1100FC2A, 21.18:1 ratio, inline, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
169 HP @ 1750 RPM, Lufkin #T390HS, 122.4:1 ratio, 1.5 SF, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
171 HP @ 1750 RPM, Falk #2070Y1-L, Par, 1.84 ratio, 950 RPM output  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
171 HP @ 1750 RPM, Falk #2120YT2-LD, 38.73:1 ratio, parallel, unused  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
175 HP, Falk #2070Y2-9.044:1, 90Y1-3.37:1, 2080GHB-5.08:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
177 HP @ 1740 RPM, Falk #2165YN3-S, 19.96 RPM output, 86.16:1 ratio, 1.63 service factor  RFQ
Mosier Industrial Services Corp, Crestline, OH 419-683-4000 (Email: matt.s@mosierindustrial.com) Matt Songer
179 HP @ 1725 RPM, Philadelphia #11HP-3, 38.4:1 ratio, new  RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
186 HP, Falk #120Y1A, Parallel Shaft Gear Reducer, 2.755:1 Ratio, #12090  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
188 HP @ 1750 RPM, Falk #2090FC2A, 21.01:1 ratio, inline, unused  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
188 HP @ 1750 RPM, Foote-Jones, Frame 1502-HLE, 38.4 ratio, 1994  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
188 HP @ 1750 RPM, Foote-Jones, Frame BHE-1-1502-RC, 38.44:1 ratio, 1995  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
190 HP @ 1170 RPM, Falk #2110YB2, right angle, 21.530:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
190 HP @ 1750 RPM, Dodge #DCR7, Gear Drive, 13.91:1 Ratio, #40006  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
190 HP @ 1750 RPM, Pittsburgh Gear #KD200FF, 10.4293:1 ratio, 1.91 SF, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
193 HP @ 1793 RPM, Falk #98-031989-01, Parallel Shaft Gear Reducer, 8.996:1 Ratio, 199.3 RPM output, 1998, #22833  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
193 HP @ 5000 RPM input, Elliott #C-2, 4.02:1 ratio, 1.5 SF (2 available)  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
194 HP @ 1758 RPM, Westinghouse #SU-819-F, 9600 RPM out, 5.462:1 ratio, 1.00 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
195 HP @ 1700 RPM, Foote-Jones, Frame 2153-HLD, 67.784:1 ratio, 1.73 Svc Factor, rebuilt  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
195 HP, Hansen #RDA11S-BN-3.2, Parallel Shaft Gear Drive, 3.1176:1 Ratio, #11280  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
199 HP @ 1750 RPM, Philadelphia #3415BT, right angle, 4.130:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
199.33 HP @ 1750 RPM, Rexnord #Neptune, 20.41:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
200 HP, Nuttall Gear #S12, Gear Drive, 4.1053:1 Ratio, 200 Rpm Output, 1.25 Service Factor, Rebuilt, #34926  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
200 HP @ 805 RPM, Falk #2130Y2-B, 11.86:1 ratio  Camera icon RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
200 HP @ 870 RPM, Falk #2090Y1-LD, parallel shaft, 3.476:1 ratio, new  Camera icon RFQ
Rogers Equipment Sales Inc, Durango, CO 800-990-7374 (Email: res@frontier.net) Jeff/ Joey/Cale
200 HP @ 900 RPM, Western #DT62, 2-speeds 30:1 & 100:1 Ratio  RFQ
George Washington Machinery, East Wenatchee, WA 509-750-1297 (Email: gwm97@aol.com) John P. Lewandowski
200 HP @ 1150 RPM, Falk #345A1-AS, 227 RPM output (2 available)  Camera icon RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
200 HP @ 1200 RPM, Farrel #DR39, Order #66A2115, 25.29:1 ratio, 47 RPM out, parallel  Camera icon RFQ
Tech First Machinery Inc, Charlotte, NC 704-552-0046 (Email: fboling@techfirst.us) Fred Boling
200 HP @ 1257 RPM, Falk #2070Y1-LD, Enclosed Gear Drive, 3.368:1 Ratio, 373.2 RPM output, #34989  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
200 HP @ 1750 RPM, Falk #2070Y1-B, Parallel Shaft Gear Reducer, 3.652:1 Ratio, 479.1 RPM output, #25261  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
200 HP @ 1750 RPM, Falk #2080Y1B, Parallel Shaft Enclosed Gear Drive, 2.027:1 Ratio, #20727  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
200 HP @ 1750 RPM, Falk #2090FC2AB, 9.257 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
200 HP @ 1750 RPM, Falk #M1190DHC3AS, 49.96:1 ratio, 35 RPM output  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
200 HP @ 1750 RPM, Horsburgh & Scott #170-TSPL, 52.94:1 ratio, 1.0 SF, par.shaft (2 available)  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
200 HP @ 1750 RPM, Lufkin #S85C, 2.26:1 ratio, 2.18 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
200 HP @ 1750/154 RPM, Westinghouse, 11.372:1 ratio, offset par  RFQ
East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Email: info@eastcoastmotor.com) Pearce/ Boykin
200 HP @ 1760 RPM, Falk #70Y1-S, Gear Reducer, Parallel Shaft, 1.898:1 Ratio, 927.3 RPM output, #10859  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
200 HP @ 1765 RPM, Terry #M, 6986 RPM out, 3.95:1 ratio, 1.00 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
200 HP @ 4000 RPM, Western #75HSA40A, 1163 RPM out, 3.439:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
200 HP @ 4320 RPM, Elliott #C5, 6:1 ratio  Visit Dealer's Equipment Listings  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
200 HP, Nuttall #90R55386, 42.819:1 ratio, 1.58 SF, parallel shaft gear reducer  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
215 HP @ 1750 RPM, Pittsburgh Gear #KT285, 24.4657:1 ratio, 2.11 SF, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
225 HP @ 1750 RPM, Falk #1120F2A, 32.19:1 ratio, concentric  RFQ
Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Email: Phansen@mardustrial.com) Paul Hansen
225 HP, Falk #2050Y1-2.07:1, 2090Y1-6.23:1, 100YB2-7.58:1, 2070F2-7.51:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
227 HP @ 900 RPM, Lufkin #S147, 2034 RPM out, 2.26:1 ratio, 1.75 SF, s/n #61/62 (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
228 HP @ 1750 RPM, Rexnord #Earth, 6.12:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
231 HP @ 1750 RPM, Falk #2080FC2A, Gear Drive, 11.13:1 Ratio, 158 RPM output, #36815  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
233 HP @ 1750 RPM, Falk #2135Y2, 45.56:1 ratio, parallel (2 available)  Camera icon RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
235 HP @ 1750 RPM, Pittsburgh Gear #KD225FF, 10.4167:1 ratio, 2.19 SF, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
238 HP @ 1800 RPM, Falk #2070Y1-S, 1.944:1 ratio, 900 RPM output, #54066  Camera icon Visit Dealer's Equipment Listings  RFQ
Power Zone Equipment, Center, CO 719-754-1981 (Email: jay@powerzone.com) Jay Osmon
240 HP @ 1750 RPM, Falk #2155Y2-B, 26.26:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
245.90 HP @ 1750 RPM, Rexnord #Neptune, 13.85:1 ratio, inline, unused  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
250 HP @ 1150 RPM, Western, 6.04:1 ratio, par, Size S67  RFQ
Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris
250 HP @ 1185 RPM, Hamilton #H1137, Gear Reducer, 4.84:1 Ratio, 245 RPM output, #35438  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
250 HP @ 1200 RPM, Falk #98-067344-01, Parallel Shaft Gear Reducer, 4.471:1 Ratio, 268 RPM output, 1998, #22829  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
250 HP @ 1200 RPM, Falk #98-067345-01, Parallel Shaft Gear Reducer, 4.471:1 Ratio, 268 RPM output, 1998, #22830  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
250 HP @ 1200 RPM, Falk #98-067346-01, Parallel Shaft Gear Reducer, 4.471:1 Ratio, 268 RPM output, 1998, #22831  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
250 HP @ 1750 RPM, Falk #2120Y1, 7.429:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
250 HP @ 1750 RPM, Falk #425A2-C, 20.40:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
250 HP @ 1750 RPM, Falk #425AB3-AB, 25.2:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
250 HP @ 1750 RPM, Flanders #GE120, 28.189:1 ratio, reconditioned  Visit Dealer's Equipment Listings  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
250 HP @ 1750 RPM, Link-Belt #LC315, 31:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
250 HP, Westinghouse #S12F, 91/27 ratio, 393 RPM out, 2.1 SF, 80R18954, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
River City Industrial Inc, Chattanooga, TN 423-821-4712 (Email: kVA@RiverCityIndustrial.com) Philip Mantel
250 HP, Falk #2070Y1-LB, Enclosed Gear Drive, 2.528:1 Ratio, 2007, #34890  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
250 HP, Hamilton #H1125, Gear Reducer, 4.21:1 Ratio, #35440  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
250 HP, Nuttall #90R55387, 42.182:1 ratio, 1.64 SF, parallel shaft gear reducer  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
250 HP, Omni / Dixie #G100-250, right angle gear drive, 1:1 ratio, new  RFQ
Integrity Pump & Motor Co, Fairview, TN 615-403-3309 (Email: rsmith@integritypumpandmotor.com) Ryan Smith
250 HP, Sumitomo, 1, 000, 000 & 2, 000, 000 in-lbs Output Torque  RFQ
American Steel Products Co, Toledo, OH 419-843-6051 (Email: ford@americansteel.com) Ford Cauffiel
253 HP @ 1656 RPM, Sumitomo #SM7080PS-RL-50, 51.845:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
254 HP @ 1170 RPM, Falk #2110Y2, parallel shaft, 15.540:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
254 HP, Falk #2140-72S, 8.33:1 ratio  Camera icon RFQ
Weeks Marine Inc, Cranford, NJ 908-272-4010 (Email: vplynch@weeksmarine.com) Vinnie Lynch
255 HP @ 1780 RPM, Falk #100Y1-8, 3.618:1 ratio, 490 RPM out, #1271804  Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay
255 HP @ 4000 RPM, Philadelphia #3418MBTS, 4.45:1 ratio  Visit Dealer's Equipment Listings  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
261 HP @ 1780 RPM, Westinghouse #SU-8-E, 6191 RPM out, 3.478:1 ratio, 1.00 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
268 HP @ 1750 RPM, Pittsburgh Gear #KD250FF, 14.4223:1 ratio, 1.89 SF, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
274 HP @ 1775 RPM, Terry #O, 5891 RPM out, 3.318:1 ratio, 1.00 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
280 HP @ 1160 RPM, Falk #2175Y3-S, 42.926:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
288 HP @ 1750/69.2 RPM, Alten offset par (2 available)  RFQ
East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Email: info@eastcoastmotor.com) Pearce/ Boykin
300 HP @ 900 RPM, Farrel #14E-SI, 3623 RPM out, 4.00:1 ratio, 1.00 SF (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
300 HP @ 960 RPM, U.S. / Hercules #5010HP2, 3.409:1 ratio, 282 RPM output  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
300 HP @ 1150 RPM, Falk #2090Y1-LR, 3.650 ratio, 315 RPM out, 1.63 SF, very little use  Camera icon Visit Dealer's Equipment Listings  RFQ
River City Industrial Inc, Chattanooga, TN 423-821-4712 (Email: kVA@RiverCityIndustrial.com) Philip Mantel
300 HP @ 1150 RPM, Falk Westinghouse #S-15D, Enclosed Gear Drive, 6.25:1 Ratio, 184 RPM output, 1.25 Service Factor, #34883  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
300 HP @ 1150 RPM, Prager #LS1800, offset parallel, 5.50:1 ratio, new  Camera icon RFQ
North Carolina Motors & Contr, Bailey, NC 800-849-6686 (Email: ncmc@ncmotorsandcontrols.com) Richard/ Ike
300 HP @ 1185 RPM, Hamilton #H1150, Gear Reducer, 3.562:1 Ratio, 333 RPM output, #35412  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
300 HP @ 1200 RPM, Lufkin #M85C (585 Agma), 3600 RPM out, 3.00:1 ratio, 1.95 SF (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
300 HP @ 1240 RPM, Falk #2090Y1-S, Gearbox, 3.476:1 Ratio, 356.7 output, 1.36 S.F., rebuilt .  Camera icon Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, St. Louis Park, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman
300 HP @ 1750 RPM, Falk #1080YF1-A, Gearbox, 5.04:1 Ratio, 1.60 S.F., 347.2 output, rebuilt .  Camera icon Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, St. Louis Park, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman
300 HP @ 1750 RPM, Falk #1080YF1-A, 5.04:1 Ratio, 347.2 output, 1.60 S.F., rebuilt 1998  Camera icon Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, St. Louis Park, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman
300 HP @ 1750 RPM, Falk #2120Y2-L, enclosed gear drive, 78.2 RPM out, 22.39:1 ratio  Camera icon RFQ
Mosier Industrial Services Corp, Crestline, OH 419-683-4000 (Email: matt.s@mosierindustrial.com) Matt Songer
300 HP @ 1750 RPM, Sumitomo #PHD9118R4-RJL-400, 407.84:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
300 HP @ 1819 RPM, Dodge Size 10 gearbox, TXT10, TXT1015T, 15:1 ratio, U272600 VX, rebuilt   Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
300 HP, Falk #2090Y1-6.2:1, 100Y1-5.039:1, 2100YB2-11.5:1, 2080GHB-2.733:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
300 HP, Hamilton #H1150, Gear Reducer, 3.562:1 Ratio, #35419  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
300 HP, Nuttall #90R55388, 41.422:1 ratio, 1.69 SF, parallel shaft gear reducer  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
302 HP @ 1750 RPM, Xtek, size 1201, 20.9:1 ratio, 83 RPM output, parallel  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
305 HP @ 1750 RPM, Falk #1100FC2A, 11.39:1 ratio, parallel, 155 RPM output  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
308 HP @ 1750 RPM, Falk #2110YBXD2-K, 20.97:1, Mixer Drive  Camera icon Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
308 HP @ 1770 RPM, Falk (Worthington), 471 RPM out, 3.757:1 ratio, 3.33 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
310 HP @ 1750 RPM, Hansen #MHRE2-CLN/CRN-22, 22.351:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
317 HP @ 900 RPM, Lufkin #N126, 3600 RPM out, 4:1 ratio, 1.00 SF, s/n #1/2 (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
320 HP @ 1750 RPM, Hansen #RNE24-ANR-18, Gear Drive, 18.133:1 Ratio, Unused Storeroom Spare, #34977  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
320 HP @ 1800 RPM, Hansen #MHRD2-CLN/CRN-16, 15.316:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
322 HP @ 1800 RPM, Lufkin #M84B, 4266 RPM out, 2.37:1 ratio, 1.25 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
328 HP @ 1750 RPM, Foote-Jones #8255, Par, 7.59 ratio  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
340 HP @ 1750 RPM, Hansen #MHRE2-CLN/CRN-20, 19.471:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
340 HP @ 1760 RPM, Lufkin #S105A, 3942 RPM out, 2.24:1 ratio, 1.00 SF, s/n #71  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
342 HP @ 950 RPM, Lufkin #NM107B, 3325 RPM out, 3.50:1 ratio, 1.75 SF (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
350 HP @ 850 RPM, Falk #365A1-AS, 2.8:1 ratio, 311 RPM output  Camera icon RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
350 HP @ 1030 RPM, Lufkin #S147A, 1761 RPM out, 1.71:1 ratio, 1.00 SF, s/n #144/145 (3 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
350 HP @ 1185 RPM, Hamilton #H1137, Gear Reducer, 4.84:1 Ratio, 245 RPM output, #35417  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
350 HP @ 1185 RPM, Hamilton #H1150, Gear Reducer, 3.562:1 Ratio, 333 RPM output, #35410  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
350 HP @ 1190 RPM, Falk #2140Y2-LD, 17.21:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
350 HP @ 1200 RPM, Falk #5115Y0A, Parallel Shaft Gear Reducer, 4.3714:1 Ratio, 5245 RPM output, #22291  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
350 HP @ 1750 RPM, Falk #445AB3, 34.25 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
350 HP @ 1750 RPM, Falk #445AB3-AS, 29.2:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
350 HP @ 1750 RPM, Falk #445ABRCM3, 24.76 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
350 HP @ 1750 RPM, Link-Belt #LC315, 22:4 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
350 HP @ 1750 RPM, Western #S65, 6.050:1 ratio, parallel  Camera icon Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
350 HP, Falk #2090Y-5.133:1, 140Y2-20.87:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
350 HP, Falk #89Y1-S, Parrallel Shaft Gear Reducer, 1.791:1 Ratio, unused, #13649  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
350 HP, Simpson #29G, Falk Gear Box #150SM6G, ratio 24.22, s/n #MO-7-457157-01-1, #10553  Camera icon Visit Dealer's Equipment Listings  RFQ
FL Sales Inc, Walton Hills, OH 440-498-8484 (Email: jgreene@flsales.com) John Greene
358 HP @ 1750 RPM, Falk #2145Y2B, 41.67:1 ratio, parallel  RFQ
Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Email: Phansen@mardustrial.com) Paul Hansen
364 HP @ 1750 RPM, Dodge #H2SH10, 24.212:1 ratio, 72 RPM output  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
372 HP @ 5700 RPM, Lufkin #N1000C, 5.6:1 ratio, 1.7 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
375 HP, Western, 14.315:1 ratio, 1.5 SF  Camera icon RFQ
Weeks Marine Inc, Cranford, NJ 908-272-4010 (Email: vplynch@weeksmarine.com) Vinnie Lynch
376 HP @ 1150 RPM, Lufkin #147B, 2.38:1 ratio, parallel power gear reducer  Camera icon Spec Sheet RFQ
Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Charlie Peterson
390 HP @ 1750 RPM, Falk #2130Y2-B, 17.3:1 ratio  Camera icon RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
396 HP @ 1779 RPM, Nuttall Style #86R52226, 3807 RPM out, 2.14:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
400 HP @ 1150 RPM, Falk #365A1-AS, Par, 2.041 ratio, 563 RPM output (2 available)  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
400 HP @ 1150/226 RPM, Nuttall, 5.086:1 ratio, offset par  RFQ
East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Email: info@eastcoastmotor.com) Pearce/ Boykin
400 HP @ 1200 RPM, Lufkin #N-147, 3600 RPM out, 3.01:1 ratio, 1.25 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
400 HP @ 1750 RPM, Falk #100Y1S, 2.805:1 ratio, 633 RPM output, 2.23 SF  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
400 HP @ 1750 RPM, Falk #2130YB2-S, 22.27:1 ratio  Camera icon RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
400 HP @ 1750 RPM, Falk #2150Y2-L, enclosed gear drive, 64.0 output RPM, 27.36:1 ratio  Camera icon RFQ
Mosier Industrial Services Corp, Crestline, OH 419-683-4000 (Email: matt.s@mosierindustrial.com) Matt Songer
400 HP @ 1750 RPM, Lufkin #S-127C, 4.33:1 ratio, 1.5 SF  Camera icon RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
400 HP @ 1778 RPM, Westinghouse, 318 RPM out, 5.590:1 ratio, 1.50 SF, s/n #7505  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
400 HP, Nuttall #WT20, gear box, 34.488:1 ratio, 54.5 output RPM, 1.5 SF  Camera icon RFQ
Mosier Industrial Services Corp, Crestline, OH 419-683-4000 (Email: matt.s@mosierindustrial.com) Matt Songer
401 HP @ 3450 RPM, Amarillo #SS275 Right Angle, 3450 RPM out, 1.00:1 ratio, 1.25 SF (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
429 HP @ 1750 RPM, Pittsburgh Gear #KD285FF, 10.4118:1 ratio, 2.45 SF, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
436 HP @ 1200 RPM, Western #4107C, 3680 RPM out, 3.067:1 rati, 1.50 SF, new  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
440 HP @ 1150 RPM, Horsburgh & Scott #EE3344, 502 RPM out, 2.29:1 ratio  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
450 HP @ 700 RPM, Falk #MH-165Y2-A-61717-0016, 7.80:1 ratio  RFQ
Jet Electric Motor Co, Pawtucket, RI 401-725-9050 (Email: jetelectric@hotmail.com) Mike or Dave
450 HP @ 1200 RPM, Lufkin #M106C, 3600 RPM out, 3.00:1 ratio, 2.28 SF (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
450 HP @ 1200 RPM, Western #115HSB, 7200 RPM out, 6.03:1 ratio, 1.35 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
450 HP @ 1725 RPM, Falk #2100Y2-LB, 9.302:1 ratio  RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
450 HP @ 1750 RPM, Foote Jones #1301-HLE, 4.57:1, 383 RPM output  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
450 HP @ 1800 RPM, Flender, 3600 RPM out, 2.01:1 ratio, 1.50 SF (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
457 HP @ 1050 RPM, Lufkin #S127C, 1722 RPM out, 1.64:1 ratio, 2.29 SF, s/n #337  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
460 HP @ 5667 RPM, Lufkin #N800C, 3.23:1 ratio, 1.7 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
460 HP @ 10006 RPM, Western #115HS60, 5.62:1 ratio, 1.3 SF  Camera icon RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
465 HP @ 1750 RPM, Falk #2155Y2B, 33.91:1 ratio, parallel  Camera icon Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
468 HP @ 1750 RPM, Falk #1110FC2A, 9.434:1 Ratio, 180 output, 1996  Camera icon Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, St. Louis Park, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman
480 HP @ 1185/315 RPM, Falk, 3.762:1 ratio, offset par  RFQ
East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Email: info@eastcoastmotor.com) Pearce/ Boykin
497 HP @ 1750 RPM, Falk #2190Y3-KS, 142.4:1 ratio, parallel  RFQ
Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Email: Phansen@mardustrial.com) Paul Hansen
498 HP @ 1200 RPM, Terry #S, 5189 RPM out, 4.324:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
500 HP @ 900 RPM, Western #OD64, 24.8:1 ratio  RFQ
George Washington Machinery, East Wenatchee, WA 509-750-1297 (Email: gwm97@aol.com) John P. Lewandowski
500 HP @ 945 RPM, Falk #1110YF-1, parallel shaft, 4.926:1 ratio  Camera icon RFQ
Rogers Equipment Sales Inc, Durango, CO 800-990-7374 (Email: res@frontier.net) Jeff/ Joey/Cale
500 HP @ 1000 RPM, Lufkin #S127C, 1710 RPM out, 1.71:1 ratio, 1.96 SF, s/n #3406  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
500 HP @ 1150 RPM, Lufkin #S148C, parallel power gear reducer, 3.2:1 ratio  Camera icon Spec Sheet RFQ
Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Charlie Peterson
500 HP @ 1170 RPM, Falk #2120Y1-L, 4.619:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
500 HP @ 1173 RPM, Lufkin #N804C, 4217 RPM out, 3.595:1 ratio, 2.20 SF, s/n #362  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
500 HP @ 1200/650 RPM, Falk #1090YF1-A, 1.806 ratio, 664.5/359.9 RPM out, 2.58/1.58 SF  Camera icon Visit Dealer's Equipment Listings  RFQ
River City Industrial Inc, Chattanooga, TN 423-821-4712 (Email: kVA@RiverCityIndustrial.com) Philip Mantel
500 HP @ 1275 RPM, Dominion #SR-15PPC, 3873 RPM out, 3.038:1 ratio, 2.01 SF (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
500 HP @ 1750 RPM, Falk #465A3-CR, 26.97:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
500 HP @ 1750 RPM, Falk #465ABRCM3-AS, 26.33:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
500 HP @ 1750 RPM, Hansen #NL21-BN-16, 15.76:1 ratio  RFQ
Jet Electric Motor Co, Pawtucket, RI 401-725-9050 (Email: jetelectric@hotmail.com) Mike or Dave
500 HP @ 1760 RPM, Western #4107C, 5397 RPM out, 3.067:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
500 HP @ 1775 RPM, Falk #109Y1-S, 3.243:1 ratio, 1.65 SF, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
500 HP @ 1780 RPM, Philadelphia #4010-35, 4252 RPM out, 2.389:1 ratio, 1.00 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
500 HP, Falk #1090YF1-4.9:1, 2090Y1-2.76:1, 2100Y1-5.47:1, 2110Y2-8.447:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
500 HP, Falk #109Y1S, Gear Drive, Parallel Shaft, 2.120:1 Ratio, #12552  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
500 HP, Nuttall #S12, Gear Drive, 2.730:1 Ratio, 421 RPM Output, 1.25 Service Factor, #34960  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
500 HP, PhiladeLphia #4109MT  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
504 HP @ 949 RPM, Falk #2100Y1-S, 1551 RPM out, 1.634:1 ratio, 2.72 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
514 HP @ 1750 RPM, Hansen #QUPF3-UON-25, 24.839:1 ratio, 5.14 SF, 150/220 V., '13 (3 available)  Camera icon Visit Dealer's Equipment Listings  RFQ
Repurposed Materials, Henderson, CO 303-321-1471 (Email: damon@repurposedmaterialsinc.com) Damon Carson
521 HP @ 908.6 RPM, Falk #1080YHF 1-S, 3500 RPM out, 3.852:1 ratio, 1.75 SF (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
540 HP @ 1170 RPM, Prager - Rexnord #LDRA3550, Gear Box Reducer, 3.94:1 Ratio, 297 RPM out, 2006, #38102  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
550 HP @ 5150 RPM, Lufkin #N1400C, 7.71:1 ratio, 1.70 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
552 HP @ 1750 RPM, Rexnord #Saturn, 17.21:1 ratio, inline, unused  Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
556 HP @ 1200 RPM, Falk #135YL-S, 3.914 ratio, 300 RPM output, in NV  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
563 HP @ 1750 RPM, Pittsburgh Gear #KD330FF, 14.4151:1 ratio, 2.09 SF, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
570 HP @ 1750 RPM, Western, Frame 8214, 12.9:1 ratio, sleeve bearings  RFQ
Rotation Power & Equipment, Neilburg, SK 877-823-4818 (Email: mel@rotationpower.com) Mel Dueck
580 HP @ 4700 RPM input, Turbodyne #E-4, 3.60:1 ratio, 1.7 SF (2 available)  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
598 HP @ 1200 RPM, Falk #130FC2A-B, 4.908:1 Ratio, 1.0 SF  RFQ
Keck Electric, Joliet, IL 815-931-8553 (Email: vikingsport@comcast.net) Steve Keck
600 HP @ 900 RPM, Philadelphia Gear #3227TS, 7.2 ratio, 1.5 SP, parallel  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
600 HP @ 1150 RPM, Falk #1100YF1-S, 3.406:1 Ratio, 150 output, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, St. Louis Park, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman
600 HP @ 1150 RPM, Falk #2125Y1-LS, 3.738:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
600 HP @ 1150 RPM, Nuttall #S20M, Gear Drive, 2.855:1 Ratio, 347 RPM output, rebuilt, #34942  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
600 HP @ 1170 RPM, Falk #2180YN2-B, 27.63 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
600 HP @ 1750 RPM, Falk #2165ZBX-2, 18.87 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
600 HP @ 1750 RPM, Falk #2177Z2-S, 30.57 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
600 HP @ 1750 RPM, Falk #M217VPC3A, 58.2:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
600 HP @ 1780 RPM, Lufkin #S127C, 3845 RPM out, 2.16:1 ratio, 1.00 SF, s/n #392  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
600 HP @ 1781 RPM, Lufkin #N1002C, 3598 RPM out, 2.02:1 ratio, 2.83 SF, new  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
600 HP @ 1800 RPM, Lufkin #T540H, 42:1 ratio parallel shaft  RFQ
Erie Mill & Press Co Inc, Erie, PA 814-454-1581 (Email: jan@empco-inc.com) John A. Nowak
600 HP @ 3846 RPM, Terry #Q, 2.17:1 ratio, 1.75 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
600 HP @ 4160 RPM, Terry #Q, 3.19:1 ratio, 1.7 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
600 HP @ 6195 RPM, Lufkin #N107B, gear reducer, 3.50:1 ratio, 1.30 SF (2 available)  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
600 HP, Westinghouse /Nuttall #S18F, 77/28 ratio, 343 RPM out, 2.04 SF, 80R18959, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
River City Industrial Inc, Chattanooga, TN 423-821-4712 (Email: kVA@RiverCityIndustrial.com) Philip Mantel
600 HP, Banbury #Unidrive reducer F80 or 3D, 12:1 ratio  RFQ
J M Machinery Inc, Wadsworth, OH 330-283-5078 (Email: dyer@jmmachinery.com) Michael Dyer
609 HP @ 1750 RPM, Falk #2130Y2, 17.30:1 ratio, parallel shaft  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
620 HP @ 1800 RPM, Link-Belt #CD-355, 19.66:1 ratio, 89 RPM output  RFQ
Romanoff Industries Inc, Toledo, OH 419-691-2888 (Email: jrri@romanoffindustries.com) Jay/ Ken/Ryan
626 HP @ 1170 RPM, Falk #2080Y1, parallel shaft, 2.349:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
644 HP @ 1750 RPM, Link-Belt #LC355-12HS-CE-1-12, 12.2 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
646 HP @ 1750 RPM, Falk #2185YN3-LS, 60.25:1 ratio, parallel  Camera icon Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
646 HP @ 1750 RPM, Falk #2185YN3LS, 60.25:1 ratio, parallel  Camera icon Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
650 HP @ 1354 RPM, Lufkin #S12, Gear Drive, 4.0931:1 Ratio, rebuilt storeroom spare, #34957  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
650 HP @ 1760 RPM, Western #60HSA50, 5808 RPM out, 3.3:1 ratio, 1.00 SF, s/n #3005  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
650 HP @ 4160 RPM, Westinghouse, 1200 RPM output  RFQ
Belyea Company Inc, Easton, PA 610-515-8775 (Email: sales@belyeapower.com) Shepard Belyea
650 HP @ 4500 RPM, Lufkin #MH125S, 3.93:1 ratio, 1.7 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
660 HP @ 6620 RPM input, Elliott #C-4, 3.53:1 ratio, 1.5 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
667 HP @ 1200 RPM, Lufkin #NM107, 3600 RPM out, 3.00:1 ratio, 1.75 SF (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
680 HP @ 900 RPM, Lufkin #NM1400C, 3475 RPM out, 3.861:1 ratio, 2.20 SF, s/n #358  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
680 HP @ 900 RPM, Lufkin #NM1400C, 3761 RPM out, 4.179:1 ratio, 2.20 SF, s/n #348  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
682 HP @ 1176 RPM, Western #95HSCM, 3924 RPM out, 2.21:1 ratio, 1.00 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
685 HP @ 1200 RPM, Western #115HSA80, 3624 RPM out, 3.0204:1 ratio, 1.75 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
700 HP @ 880 RPM, Farrel #S1-141-080, 2.018:1 ratio, 437 RPM out, parallel shaft, #1270814  Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay
700 HP @ 993 RPM, Falk #2100Y1-LR, parallel shaft, 1.822:1 ratio, new  Camera icon RFQ
Rogers Equipment Sales Inc, Durango, CO 800-990-7374 (Email: res@frontier.net) Jeff/ Joey/Cale
700 HP @ 1150 RPM, Falk #2100Y1-8, 2.07:1 Ratio, 553.4 output, 1.43 S.F., rebuilt, 2002  Camera icon Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, St. Louis Park, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman
700 HP @ 1200 RPM, Falk #1135YF1, Enclosed Gear Drive, 4.708:1 Ratio, 254.9 RPM output, unused, 2001, #34954  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
700 HP @ 1200 RPM, Lufkin #MH106CH, 3720 RPM out, 3.10:1 ratio, 1.68 SF (6 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
700 HP @ 1731 RPM, Western #2108, 4206 RPM out, 2.43:1 ratio, 2.224 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
700 HP @ 1785 RPM, Terry #Q, 3945 RPM out, 2.210:1 ratio  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
700 HP @ 3557 RPM, Nuttall Style #86R52226, 7613 RPM out, 2.14:1 ratio, 1.70 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
700 HP @ 3614 RPM, Western Catlog #1379, 1100 RPM out, 3.2857:1 ratio, 1.97 SF (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
700 HP @ 6690 RPM, Western #95HSA90, 3.78:1 ratio, 1.5 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
700 HP, Falk #2080Y1-1.89:1, 2110Y1-5.13:1  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
723 HP @ 3375 RPM, Philadelphia #211-09, 2.81:1 ratio, 1.75 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
750 HP @ 1024/256 RPM, Cincinnati #RPM5, 4:1 ratio, s/n 3, unused  Camera icon RFQ
M J Lindner Power Equipment, Hemet, CA 951-927-7647 (Email: kilowatts@msn.com) Mike Lindner
750 HP @ 3794 RPM, Terry #XA, 6.23:1 ratio, 1.75 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
750 HP @ 3800 RPM, Lufkin #NM1602C, 6.91:1 ratio, 1.86 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
750 HP @ 4000 RPM, Farrel #DR39, 16.65:1 ratio, w/1.95 SF  RFQ
South Bay Trading Company, Vero Beach, FL 772-567-5113 (Email: info@southbaytrading.com) Jose Prieto
750 HP @ 4500 RPM, Falk #10QA, 7.21:1 ratio, 2.00 SF (2 available)  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
776 HP, Lufkin #S127CH, Gear Drive, 2.429:1 Ratio, #38217  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
800 HP @ 1200 RPM, Falk #445A1-CS, 292.1 RPM output, 4.067:1 ratio (2 available)  RFQ
Peak Machinery Inc, Blaine, MN 612-810-1955 (Email: randy@peakmachinery.com) Randy Bayless
800 HP @ 1200 RPM, Falk #445A1-CS, 300.2 RPM output, 3.947:1 ratio  RFQ
Peak Machinery Inc, Blaine, MN 612-810-1955 (Email: randy@peakmachinery.com) Randy Bayless
800 HP @ 1750 RPM, Falk #2165Y2-LS, 25.48 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
800 HP @ 3550 RPM, Dresser #1202HLMS, 3.50 ratio, 2.0 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
800 HP @ 4000 RPM, Lufkin #NW1602C, 6.649:1 ratio, 1.84 SF  RFQ
South Bay Trading Company, Vero Beach, FL 772-567-5113 (Email: info@southbaytrading.com) Jose Prieto
800 HP, Western Gear  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
850 HP @ 1750 RPM, Falk #2120Y1-LR, 6.867:1 ratio, parallel  RFQ
Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Email: Phansen@mardustrial.com) Paul Hansen
862 HP @ 6100 RPM, Worthington #F-4, 5.1:1 ratio, 1.5 SF (2 available)  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
877 HP @ 1200 RPM, Western #4109C, 3776 RPM out, 3.147:1 ratio, 1.50 SF, new  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
883 HP @ 1750 RPM, Falk #2170YN2B, 30.57:1 ratio, parallel  Camera icon Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
900 HP @ 1100 RPM, Westinghouse #10G6816, 2.85:1 ratio, parallel  RFQ
Ace Armature Works, Baton Rouge, LA 225-356-6175 (Email: acearm@eatel.net) John McCarstle
900 HP @ 1200 RPM, Falk #445A1-CS, 329.2 RPM output, 3.600:1 ratio  RFQ
Peak Machinery Inc, Blaine, MN 612-810-1955 (Email: randy@peakmachinery.com) Randy Bayless
900 HP @ 1200 RPM, Hansen #PHD9105P2-BBP-16, 15.379 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
900 HP @ 1750 RPM, Falk #2210YN2-S, 42.61:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
900 HP @ 1750 RPM, Falk #485A2-CR, 19.2 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
900 HP, Lufkin #S1810CH, Gear Box, ITT Standard Shell & Tube Heat Exchanger, 4.844:1 Ratio, #38489  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
920 HP @ 4000 RPM, Farrel #DR44, 13.3:1 ratio, 1.75 SF  Camera icon RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
927 HP @ 1750 RPM, Hansen #QVRF2-CUN-11.2 2130YBXU2, 11.116:1, Right Angle  Camera icon Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
938 HP @ 1790 RPM, Farrel #SR2212, ratio: 5.4545:1  RFQ
Samco Enterprises Inc, Houston, TX 281-443-6505 (Email: mark.miller@samcoenterprises.com) Mark Miller
946 HP @ 1750 RPM, Falk #2110GHB1-KD, 4.071:1 ratio, right angle  Camera icon RFQ
Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Email: Phansen@mardustrial.com) Paul Hansen
960 HP @ 3600 RPM, Western #0058 HS, 360 RPM out, 10:01 ratio, 2.06 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
987 HP @ 949 RPM, Lufkin #N1402C (2017 HP Agma), 4502 RPM out, 4.744:1 ratio, 2.04 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
998 HP @ 1173 RPM, Pacific Western #140 HSE, 4131 RPM out, 3.52:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
998 HP @ 1750 RPM, Falk #2100Y1-LB, Gear Drive, 3.026:1 Ratio, 578 RPM output, #30982  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1000 HP @ 699 RPM, Lufkin #S2011CH, Gear Box, Shell & Tube Heat Exchanger, 3.281:1 Ratio, #38490  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1000 HP @ 1140 RPM, Lufkin #S2011CH, 4482 RPM out, 3.932:1 ratio, 2.15 SF (3 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1000 HP @ 1750 RPM, Falk #2180Y2-K, 21.14:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
1000 HP @ 0-1800 RPM, Eaton #WC Dynamatic eddy current clutch, water cooled, unused, #1270644  Visit Dealer's Equipment Listings  RFQ
Plantex Equipment Co, Sugar Land, TX 713-723-9181 (Email: sales@plantexequip.com) Steve Kay
1000 HP, Falk #2145Y1-LB, Enclosed Gear Drive, 5.526:1 Ratio, 1.45 Service Factor, 1990, #35459  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1020 HP @ 900 RPM, Lufkin #N1810B, 3960 RPM out, 4.40:1 ratio, 1.75 SF, s/n #118  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1026 HP @ 1800 RPM, Western #4110HS (test gear), 4050 RPM out, 2.25:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1040 HP @ 1750 RPM, Falk #2155Y1S, 6.27:1 ratio, 1.68 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
1058 HP @ 5920 RPM, Philadelphia #210-09, 3.33:1 ratio, 1.30 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
1070 HP @ 1750 RPM, Falk #2140Y2S, 11.53:1 ratio, parallel  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
1080 HP @ 1750 RPM, Sumitomo #4060 concentric reducer, 3.26:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
1100 HP @ 1760 RPM, Western #4109C, 5539 RPM out, 3.147:1 ratio, 1.60 SF, new  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1100 HP @ 1780 RPM, Western #4109C, 5602 RPM out, 3.147:1 ratio, 1.60 SF, new (3 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1100 HP, Lufkin #N1600C, 4.256:1 ratio, 2.64 SF, s/n #9651/2899/3826 (3 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1110 HP, Lufkin #D500CH, 22.59:1 ratio, Cat 1110 HP, 1.85 SF, 600 HP service, parallel  RFQ
J M Machinery Inc, Wadsworth, OH 330-283-5078 (Email: dyer@jmmachinery.com) Michael Dyer
1111 HP @ 1100 RPM, Lufkin #MF127C, 1837 RPM out, 1.670:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1134 HP @ 1200 RPM, Western #4112C, 3571 RPM out, 2.976:1 ratio, 1.60 SF, s/n #53172  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1140 HP @ 1750 RPM, Falk #2145Y1, 7.773:1 ratio, parallel shaft  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
1140 HP @ 1800 RPM, Western #2109MS, 3600 RPM out, 2.00:1 ratio, 1.856 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1140 HP @ 2000 RPM, Western #4110HS, 4500 RPM out, 2.25:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1165 HP, Sumitomo #CHHBS40A-6235Y-21, Gear Drive, 21:1 Ratio, #35286  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1169 HP @ 1775 RPM, Western Hi-Speed Unit, 24.78:1 ratio, 43989 RPM out, 1.3 Svc Factor  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
1200 HP @ 900 RPM, Lufkin #NM 189C, 3677 RPM out, 4.086:1 ratio, 2.18 SF, s/n #255  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1200 HP @ 1180 RPM, Horsburgh & Scott #240-D, 12.1:1 ratio, parallel  RFQ
Ace Armature Works, Baton Rouge, LA 225-356-6175 (Email: acearm@eatel.net) John McCarstle
1200 HP @ 1200 RPM, Western #2112MS, 4400 RPM out, 3.667:1 ratio, 2.05 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1200 HP, Westinghouse #S22H, 73/32 ratio, 429 RPM out, 2.26 SF, 80R18986, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
River City Industrial Inc, Chattanooga, TN 423-821-4712 (Email: kVA@RiverCityIndustrial.com) Philip Mantel
1200 HP, Terry #SU, 2.204:1 ratio, 1.71 SF (box only)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1200 HP, Westinghouse #75R36376, Gearbox, 3.38:1 Ratio, Cat. No. 25-18-SPL, 382 Output RPM, #34800  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1225 HP @ 1770 RPM, Lufkin #S-127CH, 2.24:1 ratio, 1.5 SF  Camera icon RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
1250 HP @ 600 RPM, Lufkin #S1810CH, 2.15:1 ratio  Visit Dealer's Equipment Listings  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
1250 HP @ 1200 RPM, Falk #465A1-CS, 267.1 RPM output, 4.437:1 ratio  RFQ
Peak Machinery Inc, Blaine, MN 612-810-1955 (Email: randy@peakmachinery.com) Randy Bayless
1250 HP @ 1770 RPM, Western #4112HS, 2052 RPM out, 1.159:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1250 HP @ 1800 RPM, Lufkin #N1600 (test gear), 2970 RPM out, 1.65:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1250 HP @ 3550 RPM, Lufkin #N440B, 11.8:1 ratio, 1.7 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
1250 HP @ 6850 RPM, Lufkin #N1204C, 3.80:1 ratio, 2.15 SF (2 available)  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
1277 HP @ 880 RPM, Falk (Worthington), 3306 RPM out, 3.757:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1291 HP @ 1750 RPM, Falk #2120Y1LR, 4.619:1 ratio, parallel  Camera icon Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
1316 HP @ 1750 RPM, Falk #385A1, parallel shaft, 2.529:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
1321 HP @ 1750 RPM, Falk #545A3-CS, 62.22:1 ratio, parallel  Camera icon Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
1321 HP @ 1750 RPM, Falk #545A3CS, 62.22:1 ratio, parallel  Camera icon Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
1330 HP @ 500 RPM, Dominion #SI-30-16, 4102 RPM out, 8.205:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1332 HP @ 5992 RPM input, Philadelphia #211-09, 3.35:1 ratio, 1.50 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
1368 HP @ 5600 RPM, Lufkin #N290B, 9.35:1 ratio, parallel, #55171  Camera icon Visit Dealer's Equipment Listings  RFQ
Power Zone Equipment, Center, CO 719-754-1981 (Email: jay@powerzone.com) Jay Osmon
1379 HP @ 3614 RPM, Western Frame #8110MS, 1100 RPM out, 3.2857:1 ratio, 1.00 SF (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1400 HP @ 22300 RPM, Western #3101 (FLGMNT), 5003 RPM out, 4.457:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1400 HP @ 22300 RPM, Western #3101-1.5, 14499 RPM out, 1.538:1 ratio, 1.5 SF, s/n #3057  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1400 HP @ 22300 RPM, Western #3101-AC (4&1 Case), 5998 RPM out, 3.71795:1 ratio (5 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1400 HP @ 22300 RPM, Western #3713, 3.4878:1 ratio, #50991  Camera icon Visit Dealer's Equipment Listings  RFQ
Power Zone Equipment, Center, CO 719-754-1981 (Email: jay@powerzone.com) Jay Osmon
1426 HP @ 4189 RPM input, Lufkin #NT440, 11.63:1 ratio, 1.75 SF  Camera icon RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
1487 HP @ 1780 RPM, Western Frame #8110MS, 5749 RPM out, 3.2857:1 ratio, 1.50 SF (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1500 HP @ 850 RPM, Falk #1150YF1-LS, 2.423 ratio, 349.5 RPM out, 2.48 SF, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
River City Industrial Inc, Chattanooga, TN 423-821-4712 (Email: kVA@RiverCityIndustrial.com) Philip Mantel
1500 HP @ 911 RPM, Lufkin #S2011CH, Gear Box w/ITT Standard Shell & Tube Heat Exchanger, 3.281:1 Ratio, #38491  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1500 HP @ 1750 RPM, Falk #2135Y1-LS, Gear Drive, 3.422:1 Ratio, 510 output, 2002, #30479  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1500 HP @ 1750 RPM, Falk #2135Y1-LS3, Enclosed Gear Drive, 3.433:1 Ratio, 510 output, #30376  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1500 HP @ 1750 RPM, Falk #2135Y1-LS3, Enclosed Gear Drive, 3.433:1 Ratio, 510 output, 1987, #30375  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1500 HP, D.O. James #SA272-600PRHM, Parallel Shaft Gear Reducer, 10.45:1 Ratio, 1995, #25003  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1506 HP @ 6600 RPM, Lufkin #N1800C, 6.55:1 ratio, 1.89 SF (2 available)  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
1640 HP @ 1235 RPM, Lufkin #SFC175.8CH, Gear Box, 3.92:1 Ratio, 315.05 RPM output, rebuilt by Lufkin 1992, #38473  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 HP @ 900 RPM, Falk #34.5X7.0Z1-S, off-set-parallel, 1.5 SF, 2.967 ratio  RFQ
Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris
1750 HP @ 1000 RPM, Brad Foote, 34.81:1 ratio, 2.0 SF, parallel shaft  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Casey Equipment/Mechanical, Pittsburgh, PA 412-963-1111 (Email: Mechanicalsales@caseyusa.com) Tom Geary
1750 HP @ 1200 RPM, Lufkin #N1404C, 4508 RPM out, 3.757:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
1760 HP, Lufkin #DF510CH-26-2, 14.79:1 ratio, 2 SF  Camera icon RFQ
Weeks Marine Inc, Cranford, NJ 908-272-4010 (Email: vplynch@weeksmarine.com) Vinnie Lynch
1844 HP, Dodge #TXT725T, Gear Drive, Torque Arm Speed Reducer, 24.59:1 Ratio, #38446  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1933 HP @ 1170 RPM, Falk #2120Y1-LR, 1.878: ratio, parallel, rebuilt  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
1950 HP, Hansen #RDK21-BN-10, Gearbox, #29988  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1965 HP @ 1750 RPM, Baldor #QHPG1-RLN, 1.8:1 ratio, parallel, unused  Camera icon Visit Dealer's Equipment Listings  RFQ
In Stock Parts, Fort Smith, AR 479-668-3141 (Email: sales@instockparts.com) Joshua Hopkins
2000 HP @ 300/750 RPM, input, H & S, size: 240s, twin output shafts, 1.794:1 ratio  RFQ
Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris
2000 HP @ 1020 RPM, Falk #1110YF, parallel shaft, 1.019:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
2000 HP @ 1750 RPM, Falk #1090YF1, 1.231:1 ratio  RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
2000 HP @ 1750 RPM, Falk #447Z1-CS, 2.05:1 Ratio, 854 output, 2.26 S.F., 1994  Camera icon Visit Dealer's Equipment Listings  RFQ
Paper Mill Surplus, St. Louis Park, MN 612-850-5936 (Email: papermillsurplus@yahoo.com) Michael Kauffman
2000 HP @ 1780 RPM, Lufkin #N1404C, 6687 RPM out, 3.757:1 ratio, 1.96 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
2018 HP @ 1780 RPM, Lufkin #N1204C, 6002 RPM out, 3.372:1 ratio, 1.74 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
2040 HP @ 4844 RPM input, Westinghouse #SU-1610, 2.75:1 ratio, 1.30 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
2100 HP @ 1000 RPM, Lufkin #N1604C, 3977 RPM out, 3.977:1 ratio, 1.88 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
2200 HP @ 16000/1800 RPM, Westech, gear reducer, 1987  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
2231 HP @ 1780 RPM, Western Frame #8110MS, 5849 RPM out, 3.2857:1 ratio, 1.00 SF (2 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
2250 HP @ 6062 RPM input, Lufkin #N1602C, 3.41:1 ratio, 1.83 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
2253 HP @ 1785 RPM, Western #4112C, 5312.5 RPM out, 2.976:1 ratio, 1.20 SF, s/n #3031  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
2300 HP @ 1780 RPM, Terry #UM, 5288 RPM out, 2.97:1 ratio, 1.00 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
2300 HP @ 7368 RPM, Lufkin #N1400C, input/1788 output, 4.212:1 ratio, 1.75 SF(3 available)  Camera icon RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
2400 HP @ 5980 RPM, Lufkin #N1400C, 3.36:1 ratio, 1.70 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
2406 HP @ 1120 RPM, Falk #1130YFI, 2.206:1 ratio  RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
2480 HP @ 1150 RPM, Link-Belt #2000HS, parallel shaft, 2.25:1 ratio  RFQ
Technical Sales & Svcs New England, Greene, ME 207-946-5506 (Email: tneinc@fairpoint.net) Pauline Cadrin
2500 HP @ 1750 RPM, Lufkin #SF2210CHS, 3.66:1 ratio, 1.55 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
2500 HP @ 1800 RPM, Western #4114A, 3631 RPM out, 2.0175:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
2585 HP @ 3781 RPM, Nuttall #SU1812, 3.87 ratio, 1.80 SF (2 available)  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
2597 HP @ 1170 RPM, Falk #2130Y1-LS, 1.83:1 ratio, parallel (3 available)  Camera icon Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
2597 HP @ 1170 RPM, Falk #2130Y1LS, 1.830:1 ratio, parallel (3 available)  Camera icon Visit Dealer's Equipment Listings  RFQ
Klistoff Equipment & Machy., Woodburn, OR 503-982-0530 (Email: jklistof@thegearboxguys.com) John Klistoff
2613 HP @ 900 RPM, Lufkin #NM189C, 3677 RPM out, 4.086:1 ratio, 1.00 SF, s/n #255  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
2800 HP @ 1683 RPM, Dominion Size #SI-1811B, 3560 RPM out, 2.1143:1 ratio, 1.50 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
3000 HP @ 1170 RPM in, Jeffrey Foote-Jones, Frame 2101HLD, 2.758:1 ratio, 1.25SF, surplus  RFQ
Salyer Motors Inc, Broken Arrow, OK 918-486-2660 (Email: sales@salyermotors.com) Bret or Matt
3000 HP @ 3013 RPM, Falk #20X14Z01, 2.51:1 ratio, 2.19 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
3000 HP @ 4500 RPM, Terry #XA, 3.7:1 ratio, 1.8 SF  Camera icon RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
3000 HP @ 13800 RPM, Falk #MO6-575002, 15.383:1 ratio  Visit Dealer's Equipment Listings  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
3300 HP @ 1750 RPM, Falk #2140Y1-LR, 2.488:1 ratio, parallel  RFQ
Mar-Dustrial Sales Inc, Portland, OR 503-285-4541 (Email: Phansen@mardustrial.com) Paul Hansen
3439 HP @ 1750 RPM, Falk #465A1, 3.667:1 ratio, new  RFQ
B & H Machine Sales Inc, Detroit, MI 800-253-2505 (Email: marc@speedreducer.com) Marc Bekolay
4000 HP @ 3162 RPM input, General Electric #S238, 3.52:1 ratio, 1.30 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
4000 HP @ 22536 RPM, Cincinnati BHS #WGD2-170, 12.52:1 ratio, new  Camera icon Visit Dealer's Equipment Listings  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
4670 HP @ 1200 RPM, Lufkin #S2212C, 2.438:1 ratio, #56254  Camera icon Visit Dealer's Equipment Listings  RFQ
Power Zone Equipment, Center, CO 719-754-1981 (Email: jay@powerzone.com) Jay Osmon
5880 HP @ 4000 RPM, Philadelphia #221HSD, 2.53:1 ratio, 1.7 SF  RFQ
Power-Flow Int'l Sales Inc, Houston, TX 713-464-1832 (Email: mail@power-flow.com) Bob Gibbs
5980 HP @ 5029/1800 RPM, Graffenstaden #R-TRE40, CW, 2.81:1 ratio  Camera icon RFQ
NSV Energy, LLC, Canton, GA 908-421-4139 (Email: sales@nsvenergy.com) Sales
7000 HP @ 2000/7000 RPM, Philadelphia #8900, 1.857:1ratio, parallel, 1.4SF, incr.&decr.  Camera icon Visit Dealer's Equipment Listings  RFQ
Power Zone Equipment, Center, CO 719-754-1981 (Email: jay@powerzone.com) Jay Osmon
8400 HP @ 12800 RPM, Lufkin #NSB1119, 5399 RPM out, 2.371:1 ratio, 2.67 SF  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
9048 HP @ 750 RPM, David Brown #630x450 CRS, 6260 RPM out, 8.3474:1 ratio, 1.7 SF (4 available)  RFQ
Power Machinery LLC, Houston, TX 713-462-3176 (Email: sreyenga@pmi-pump.com) Steven R./ Randy G.
10000 HP @ 9807 RPM, Lufkin, 1800 RPM output, 5.448:1 ratio  RFQ
Belyea Company Inc, Easton, PA 610-515-8775 (Email: sales@belyeapower.com) Shepard Belyea
12837 HP @ 4711 RPM, Lufkin #N2400C, 1800 RPM output, 2.617:1 gear ratio, 1.56 SF  PDF icon RFQ
NSV Energy, LLC, Canton, GA 908-421-4139 (Email: sales@nsvenergy.com) Sales
20000 HP @ 5105 RPM, General Electric #S1424RC, (15.6 MW), 1.418:1 ratio, reconditioned   Visit Dealer's Equipment Listings  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
20000 HP @ 10957 RPM, Allen #ASG-33, 6.087:1 ratio, new  Visit Dealer's Equipment Listings  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
20300 HP @ 5086 RPM, General Electric #S-36-C2, 1.413:1 ratio, reconditioned  Camera icon Visit Dealer's Equipment Listings  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
20800 HP @ 5000/3000 RPM, General Electric  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
22000 HP @ 5086 RPM, General Electric #S-36-C2, (17 MW), 1.413:1 ratio, reconditioned   RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
22300 HP @ 5086/3600 RPM, General Electric  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
23000 HP @ 5105 RPM, Prager #HSG2175, (15 MW), 1.418:1 ratio, reconditioned  Camera icon Visit Dealer's Equipment Listings  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
25000 HP @ 5105 RPM, General Electric #S-524, (19.6 MW), 1.418:1 ratio  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
33000 HP @ 5059 RPM, Prager #H5G-2575C, (20 MW), 1.686:1 ratio, new  Visit Dealer's Equipment Listings  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
33512 HP @ 5059/3000 RPM, Prager  Camera icon Visit Dealer's Equipment Listings  RFQ
Wabash Power Equipment Co, Wheeling, IL 800-704-2002 (Email: info@wabashpower.com) Michael Pfeiler
36400 HP @ 5105 RPM, General Electric, 3600 RPM output  RFQ
Belyea Company Inc, Easton, PA 610-515-8775 (Email: sales@belyeapower.com) Shepard Belyea
90 RPM, Sumitomo #H-227 FKC Screw Press Gear Drive, 43:1 Ratio, #29989  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
155 RPM, Falk #752-3EZZ-06C5, Motor Reducer, 11.28:1 Ratio, Class 2, Rebuilt Storeroom Spare, #34992  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
494 RPM, Falk #30YB2-A, Gear Box, 5.084:1 Ratio, 97 RPM output, #38676  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
580 RPM, Philadelphia #10-H3-2, Gearbox, 9.3:1 Ratio, 62 output, #29696  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
720 RPM, Ex-cell-o Corporation #UO30-70-A6, Cone Gear Drive, 750:1 Ratio, #29963  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
752/160 RPM, Falk #2090YN2-L, Right Angle Gear Drive, 12.22:1 Ratio, 61.54/12.21 RPM output, 1989, #25219  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
773.4/386.5 RPM, Falk #2070YB2-A, Gearbox Speed Reducer, 5.167:1 Ratio, 149.7 output, #29694  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
870 RPM, Cone Drive #HV60A068-8B, Speed Reducer, 50:1 Ratio, 1 Service Factor, Rebuilt Storeroom Spare, #34888  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
874 RPM, Falk #2090GHB1-S, Enclosed Gear Drive, 5.059:1 Ratio, 173 output, 1981, #29732  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
874 RPM, Falk #2090GHB1-S, Enclosed Gear Drive, 5.059:1 Ratio, 173 output, 1983, #29733  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
874 RPM, Falk #2090GHB1-S3, Enclosed Gear Drive, 5.059:1 Ratio, 173 output, 1982, #29786  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
874 RPM, Falk #2090GHB1-S4, Enclosed Gear Drive, 5.059:1 Ratio, 173 output, 1982, #29754  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
960 RPM, Renold #6857199, Gear Drive, 69.14:1 Ratio, #36910  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1185 RPM, Hamilton #H1125, Gear Reducer, 4.214:1 Ratio, 281 RPM output, #35415  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1200 RPM, Kumera #EKE690/25/850, Gear Drive, 101.16:1 Ratio, 2000, #29042  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1345 RPM, Q.G.W. Parallel Shaft Gear Reducer, 7.785:1 Ratio, 173.2 RPM output, #24972  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1725 RPM, Dodge #056CM16A111, Gear Box, 144:1 Ratio, #33413  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Dodge #56CM21-A, Gear Drive, 192:1 Ratio, 9.11 RPM Output, #30847  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Emerson EPT Series #3000, Speed Reducer, 11.2:1 Ratio, #30845  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Falk #1.51-102FZ3A, Gear Box, 38.82:1 Ratio, 45 RPM output, #41190  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Falk #2135Y1-LS3, Enclosed Gear Drive, 3.433:1 Ratio, 510 output, #30378  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Hansen #QHPT3RLN-71, Right Angle Gear Drive, .439:1 Ratio, #21394  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Hansen #RLB44-ANN-112, Gear Drive, 111.81:1 Ratio, 15.65 RPM output, 1.85 Service Factor, #34927  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Hercules #6SM, Gear Box, 4.1:1 Ratio, Unused Storeroom Spare, #38220  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Hercules #GMO, Gear Reducer, 87:1 Ratio, Storeroom Spare, #34138  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Hercules #Z0448, Hercules Gear Box, 7.56:1 Ratio, 230 output, #29698  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, SEW Eurodribe #SA52LP143, Gear Drive, 37.94:1 Ratio, 1540 Lb/In Torque, #37166  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, SEW Eurodrive #SA62LP143, Gear Drive, 61.26:1 Ratio, 3410 Lb/In Torque, #37167  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Sm-Cyclo #CHH-4195Y-87, 87:1 Ratio, 18.1 Output, #32940  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Sm-Cyclo #CHH6135Y-17, Gear Drive, 17:1 Ratio, #33418  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Sterling #RA-GM207, Gear Drive, 100:1 Ratio, #33417  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Stober Drives Inline Gear Reducer, Cast Iron, 24.6:1 Ratio, #25216  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Textron #UU50-100-A1, Cone Drive, 600:1 Ratio, 1 Service Factor, Rebuilt Storeroom Spare, #34884  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Textron #UU80A530-A9, Cone Drive, 600:1 Ratio, 1.6 Service Factor, Rebuilt Storeroom Spare, #34886  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1750 RPM, Winsmith #926MDTD, Speed Reducer, 300:1 Ratio, 2005, #29013  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
1780 RPM, Moventas #2V3C400NE, Gear Drive, 26:1 to 34:1 Ratio Double Reduction, 2005, #34853  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
3000 RPM, Lenze #LP25, 500027, 12:1 ratio, left angle, 8850 cont.torque lb./in., used  Camera icon Visit Dealer's Equipment Listings  RFQ
Brooks Motor & Electric Inc, Glasgow, KY 270-678-1337 (Email: chris@bmebearings.com) Chris Brooks
Black Clawson #S1-1/2, Gear Drive, 3.455:1 Ratio, #29689  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Black Clawson #SO, Spiral Revel Gear Drive, 24:1 Ratio, #29094  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Bonfiglioli Series #AS30, Gear Drive, Unused Storeroom Spare, #33289  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Brevini #ED22507/ES, Transmission Gear Drive, 31.5:1 ratio, storeroom spare, #38822  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Brook Hansen #P4, Gear Drive, 55.741:1 Ratio, #38862  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Brook Hansen #SFN32A2.5I, Gear Drive, 2.5:1 Ratio, Unused Storeroom Spare, #32152  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Brook Hansen #SKZN95C35.5I, Gear Drive, 34.88:1 Ratio, Storeroom Spare, 2010, #38391  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Brook Hansen #SSFN32A2.5I, Gear Drive, 2.5:1 Ratio, Storeroom Spare, #32157  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Browning, Parallel Shaft Gear Drive, 2.269:1 Ratio, #25221  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
China Corp #904, Gear Box, 35:1 Ratio, #32943  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Cotta #GR3200A, 2.18:1 Ratio, 21" rubber block drives, SAE #00 bell housing  RFQ
Weeks Marine Inc, Cranford, NJ 908-272-4010 (Email: vplynch@weeksmarine.com) Vinnie Lynch
Dodge #DCR4, Gear Drive, 4.966:1 Ratio, 1.0 Service Factor, 352 Output, #34411  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Dodge #DCR6, Gear Drive, 6.167:1 Ratio, 284 RPM output, 1.0 SF, #40007  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Dodge #KA97, Gear Drive, 176.05:1 Ratio, #38456  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Dodge #TD225, Gear Drive, 24.92:1 Ratio, #39910  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Dodge #TXT225T, Gear Drive, 24.46:1 Ratio, Unused Storeroom Spare, #39908  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Dodge Size #TXT525CT, Stock #245552, 25.56 ratio, TPR Bush RED, new in box  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
Dodge #TXT6, TXT615T, size 6, 15.33:1 ratio, rebuilt  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
Dodge Maxum Series #DCR7, ID #299142WW, size 7, 11.21 ratio  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Green Industrial LLC, Belgium, WI 877-442-8971 (Email: info@gibuys.com) Jeff Herrick
Falk #105FC2A005, Parallel Gear Box, 13.48:1 Ratio, Rebuilt Stock Room Spare, #28856  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #120Y1A, Parallel Shaft Gear Reducer, 2.755:1 Ratio, #12091  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #2050-Y1B, Parallel Shaft Gear Reducer, 7.538:1 Ratio, #24389  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #2050-Y1L, Parallel Shaft Gear Reducer, 7.538:1 Ratio, 1992, #24392  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #2070Y1B Gearbox, 4.095:1 Ratio, Parallel Shaft, #20937  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #2090GHB1, Gear Box, 5.15:1 Ratio, #33685  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #2100Y1B, Parallel Shaft Gear Reducer, 5.267:1 Ratio, #13162  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #4207J-C14, Enclosed Gear Drive, 14.47:1 Ratio, #31113  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #4307J25C, Gear Drive, 25.26:1 Ratio, 4" Shaft Diameter Opening, 1" Keyway, Storeroom Spare, #34177  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #4608J25C, 25:1 ratio  RFQ
West River Machinery Co., Oakwood, VA 276-991-4450 (Email: psavage@westriverconveyors.com) Joe Street
Falk #5207J14A Quadrive, Gear Drive, 14.47:1 Ratio, #31072  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #5207J14A Quadrive, Gear Drive, 14.47:1 Ratio, Enclosed, #31068  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #6HB, Gear Drive, 5.27:1 Ratio, #34057  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #6HB, Gear Box, 5.27:1 Ratio, #34104  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #702-02AS, 7.7:1 ratio  RFQ
Weeks Marine Inc, Cranford, NJ 908-272-4010 (Email: vplynch@weeksmarine.com) Vinnie Lynch
Falk #7GHB, Right Angle Gear Drive, 5.267:1 Ratio, #11979  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #Quadrive-5215-J25A, Gear Drive, 24.95:1 Ratio, #41271  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #RK2060F2A, Ultra Max Enclosed Gear Drive, 11.26:1 Ratio, 80 RPM output, #28760  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #RK2060F2A001, Ultra Max Enclosed Gear Drive, 11.26:1 Ratio, 80 RPM output, #28764  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #RK2060F2A002, Ultra Max Enclosed Gear Drive, 11.26:1 Ratio, 80 RPM output, #28765  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #RK2060F2A004, Ultra Max Enclosed Gear Drive, 8.996:1 Ratio, 80 RPM output, #28761  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #RK2060F2A004, Ultra Max Enclosed Gear Drive, 11.26:1 Ratio, 80 RPM output, #28762  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #RK2060F2A005, Ultra Max Enclosed Gear Drive, 11.26:1 Ratio, 80 RPM output, #28763  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #RK2060F2A006, Ultra Max Enclosed Gear Drive, 11.26:1 Ratio, 80 RPM output, 1999, #28752  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #RK2060F2A007, Ultra Max Enclosed Gear Drive, 11.26:1 Ratio, 80 RPM output, #28766  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #RK2060FC2A002, Gear Drive, 21.13:1 Ratio, #41193  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #RK2060FZ3A, Gear Box, 46.65:1 Ratio, #41306  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #RK2090FC2A, Gear Box, 25.66:1 Ratio, #41312  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Falk #RK2100F-2A UltraMax, Gearbox, 17.29:1 Ratio, 2005, #38411  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Farrel #3D, Gear Box, Uni drive gear box, #22159  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente
Hansen #JFN73C, Transmission Gearbox, 100:1 Ratio, #38174  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Hansen #RSD11-AN, Gear Box, 3.684:1 Ratio, Unused Storeroom Spare, #33422  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Horsburgh & Scott #Mark-II, Speed Reducer, 10.293:1 Ratio, #29122  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Kumera #CAM-2125A2E3, Worm Gear Drive, Unused Storeroom Spare, #33770  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Lufkin #S127CH, Gear Drive, 2.429:1 Ratio, Rebuilt By Falk In 2013, #38213  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Pfaudler #2.5TW, Gear box, #23732  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Federal Equipment Company, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente
Philadelphia #1800, 3000:1 ratio, double worm dr, SDUV, 370000 torq, unusd, ordr#448066  Camera icon RFQ
M J Lindner Power Equipment, Hemet, CA 951-927-7647 (Email: kilowatts@msn.com) Mike Lindner
Philadelphia Gear #1800SDUV, 3000:1 ratio, double worm dr, ordr#448066, 370000 Torque  RFQ
M J Lindner Power Equipment, Hemet, CA 951-927-7647 (Email: kilowatts@msn.com) Mike Lindner
Philadelphia #3509, Right Angle Gear Reducer, 11.4:1 Ratio, #20221  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Radicon #9AA287-RA-541, Right Angle Gear Reducer, 5:1 Ratio, Unused, 1985, #25663  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Radicon #AA-1250, Gear Drive, Speed Reducer, 70:1 Ratio, #38460  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Radicon #AO800, Right Angle Gear Drive, 40:1 Ratio, #38695  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Radicon #AU400, Right Angle Gear Drive, 12.5:1 Ratio, #38696  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Radicon #AU700-B, Right Angle Gear Drive, 20:1 Ratio, #38694  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Sandy Hill, Right Angle Gear Drive, 5.0:1 Ratio, #23833  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Santasalo #X10100, Parallel Shaft Gear Reducer, 15.160:1 Ratio, 1995, #16223  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
SEW Eurodrive #FA77AM184, Speed Reducer, 72.50:1 Ratio, 1.0 Service Factor, 12300 Torque, Unused Storeroom Spare, #34949  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
SEW Eurodrive #FA80LP182, Gear Drive, 86.75:1 Ratio, #37165  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
SEW Eurodrive #K67R43LP56-KS, Gear Drive, 3008.0:1 Ratio, #31022  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
SEW Eurodrive #R102, Parallel Gear Drive, 9.05:1 Ratio, #29118  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
SEW Eurodrive #R133Z, Gear Reducer, 40.32:1 Ratio, #32801  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
SEW Eurodrive #FA77AM146, Gear Box, 166.47:1 Ratio, #40087  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
SEW Eurodrive #R77AM56, Gear Drive, 92.97:1 Ratio, Storeroom Spare, #38588  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
Sulzer Escher Wyss #R87A-DFV160M4, Inline Gear Drive, 8:1 Ratio, Steel/Cast Iron, #25016  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels
ZF #RCD320, gear box, 5:1 ratio, 10000 hours, s/n 21543  Camera icon RFQ
Industrial Bay International Ltd, Cambridge, ON 519-267-5203 (Email: Craig@industrial-bay.com) Craig Hussey
Kumera #CAM-2125A2E3, Worm Gear Drive, Unused Storeroom Spare, #33770  Visit Dealer's Equipment Listings  RFQ
Can-Am Machinery, Inc., Fitchburg, MA 978-343-4400 (Email: jake@canaminc.com) Jake Daniels

Back to Electric & Power equipment listings.


Photo icon = photo available    Spec Sheet icon = spec sheet available    PDF icon = PDF available    RFQ icon = request quote from seller    camera icon = video available    web site icon = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise