Results for Twin Screw Extruder
1 - 100 of 1758 listings
Leistritz co-rotating twin screw extruder, 34mm
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Leistritz
Used 34mm 30/1 L/D Leistritz co-rotating twin screw extruder. Model LSM34GG, serial #330-1551-01, new 1987. No screw shafts or elements included. Driven by 11 Kw (15 HP) D/C motor and SCR control. Has (8) zones of temperature control on integral panel. 300 RPM max screw speed. Has closed loop water cooling system and ...more
Leistritz #LSB70, twin screw side feeder, 70mm screw, 2011
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Leistritz
Model: LSB70
Year: 2011
Used 77mm Leistritz Twin Screw Side Feeder (Only), Manufacturer: Leistritz, Model: LSB70, Size: 77mm, Serial: 4080, Year: 2011, Location: On Site at Perry (Hainesport, NJ - USA).
Berstorff, 125 HP, 6 Meter x 180mm twin screw extruder reactor, 1994
Transamerican Equip Co LLC | Tuscaloosa, AL
Category: Extruders and Extrusion Lines
Seller: Transamerican Equip Co LLC
Location: Tuscaloosa, AL
Mfr: Berstorff
Year: 1994
1994 Berstorff 125 HP 6 Meter x 180mm Twin Screw Extruder Reactor 30,000 Flender process speed reducer Consists of:, Screws, Barrel, Die, Outlet flange, 2 Heating zones, 2 Cooling zones, 4 Circulation pumps, Shaft equipment packing, Integral heat transfer jackets, Includes AC variable speed drive, TEBC inverter duty ...more
Werner & Pfleiderer, twin screw extruder, 58mm screw, 16:1 L/D, 25 HP DC, co-rotating, 1986
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Werner & Pfleiderer
Year: 1986
One (1) Used Werner & Pfleiderer 58mm Twin Screw Extruder, twin screw compounder, continuous mixer, 16:1 L/D, Type Continua 58, Reliance Motor 25HP DC 1750RPM 500V, Gearbox rated for 40HP, co-rotating, 3 heating zones, electrically heated, water cooled, vented, control panel and pump included, previously extruder ...more
Leistritz twin screw side feeder only, 60mm screw, includes new spare gear reducer
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Leistritz
Used 60mm Leistritz Twin Screw Side Feeder (Only), Manufacturer: Leistritz, Size: 60mm, Includes spare motor/gear reducer, Location: On Site at Perry (Hainesport, NJ - USA).
Get email updates for newly added "twin screw extruder"
2.83" Jiangsu Xinda #PSHJ72, twin screw extruder, Control panel, #19072A
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Jiangsu Xinda
Model: PSHJ72
Product s, Used 72mm Jiangsu Xinda Twin Screw Extruder, Model PSHJ72, 40:1 LD Ratio, 10 Elements, Port in Zone 5, Vent In Zone 8, 110 Kw Main Motor(147.5 Hp) With AC Drive, 500 RPM Screw Speed, Has Clampshell Style Barrel Opening, 11 Temp Zone,1 Die Zone, 1 Pressure Readout 2.2Kw Material Feeder, With Control Panel ...more
Leistritz, counter rotating twin screw extruder, 30mm, 42:1 L/D, elec.heated, air cooled, 1987
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Leistritz
Year: 1987
Used 30mm Leistritz counter-rotating twin screw extruder, 42/1 L/D vented barrel. New 1987. Has 11kw motor, 2200 rpm, 422 volt input. Gearbox rated at 13.5kw at 60hz. Barrel is electrically heated and air cooled and includes operator control panel., Location: On Site at Perry (Hainesport, NJ - USA).
1.57" Crown #CEXT40C, Co-Rotating Twin Screw Extruder, 100 HP, 480 V., 2010
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Crown
Model: CEXT40C
Year: 2010
Make: Crown, Model: CEXT40C, Year: 2010, Machine Location: Upon Request, -Type: Co-Rotating Twin Screw, -Screw Diameter: 40mm, -L/D Ratio: 40:1, -Motor: 100 HP, -Screw Speed: 600 RPM, -s:, -100 HP AC Inverter Duty Motor with ABB, -AC800 Inverter Drive, -10 Barrel Zones, High Temp, Bronze Cast, -Electrically Heated ...more
Extruder Tech #ET-003, 3mm twin screw extruder, 30:1 L/D, .5 HP, electrically heated, water cooled, Stainless Steel, #28211
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Extruder Tech
Model: ET-003
Used Extruder Technologies twin screw extruder, model ET-003, stainless steel construction, 3 mm diameter barrel, requires set of screws, 30:1 L/D, electrically heated, water cooled, split barrel design, (2) plugged vent ports, 2 barrel zone, 1 feed zone, 500 RPM screw speed, 1/2 hp 230/460 volt motor with Allen ...more
.43" Thermo-Fisher #Scientific Process 11, Twin Screw Extruder w/ Haake Minjet Pro, 2021
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Model: SCIENTIFIC
Year: 2021
Make: Thermo Fisher Scientific, Model: Process 11 & MiniJet Pro, Year: 2021, Machine Location: Upon Request, – MiniJet Adapter [567-7641], – Adder High Temperature (450 °C) [567-7602], – Fully Ported Barrel [567-7606], – ScrewConfig Software [567-6111], – Data Logging Software ...more
Polar Process #PP352HU3, Stainless Steel twin screw extruder
Frain Industries | Carol Stream, IL
Category: Food Extruders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Polar Process
Model: PP352HU3
Polar Process / Advanced Stainless, Model PP352HU3, stainless steel, twin screw extruder and feeder, with pounds of product per hour – depending on materials and application. Hopper dimensions: 12½" in Length; 7½" in Width; 9" in Depth. (2) 3½" OD x 26" long ...more
Brabender #088 type 09-25-000, twin screw extruder package, 25mm, 24:1 L/D, air cooled
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Brabender
Model: 088
Used 25mm 24/1 L/D Brabender twin screw extruder package. Has air cooled extruder, temperature control panel, type D10002, prep center with model 088 type 09-25-000 temperature pressure module. Includes 10 HP DC motor and control. serial #435., Location: On Site at Perry (Hainesport, NJ - USA).
Werner & Pfleiderer, co-rotating twin screw extruder, 83mm, 36:1 L/D, 200 HP DC, SCR Control
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Werner & Pfleiderer
Used 83 mm Werner & Pfleiderer Co-Rotating Twin Screw Extruder, 36/1 L/D barrel, driven by 200 hp dc motor with SCR control, Temperature control panel, No side feeder, Serial #136255, Click on the link below to see a video of the machine running., Location: On Site at Perry (Hainesport, NJ - USA).
Shandong Arrow #FT36 Extruder, Pilot Scale, Twin Screw, HMMA, 2021
Revelation Machinery | Chicago, IL
Category: Extruders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Shandong Arrow
Model: FT36
Year: 2021
Make: Shandong Arrow Machinery, Model: FT36, Year: 2021, Machine Location: Upon Request, Shandong Arrow FT36 Extruder, Pilot Scale, Twin Screw, HMMA (high moisture meat analogue), 2021, Overview: pilot-scale, twin screws extruder with less than 300 hours of use., The FT36 extruder is a specialized piece of equipment ...more
Werner & Pfleiderer #ZSK20, co-rotating twin screw extruder, 20mm, 40:1 L/D, 2003
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Werner & Pfleiderer
Model: ZSK-20
Year: 2003
Used 20mm Werner & Pfleiderer model ZSK20 co-rotating twin screw extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft. Extruder is powered by 5 hp AC motor with Allen Bradley 1336 impact drive unit, 588 rpm screw speed. Includes ...more
.79" Theysohn #TSK-TT 020/28D, twin screw extruder, 28:1 L/D ratio, 2000, #18999A
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Theysohn
Model: TSK-TT 020/28D
Year: 2000
Product s, Used 20mm Theysohn Co-rotating Twin Screw Extruder, Model TSK-TT 020/28D, 28:1 L/D Ratio, 3.75 KW Main Motor, 1,750 RPM, 2.79:1 Gearbox Ratio, Water Cooled Barrel, 5 Temperature Control Zones, 4 Barrel, One Die, Amp Meters For Each Zone, Amp Meter, RPM Gauge, Vent Section, Strand Die, Comes With Material ...more
3.46" Clextral #EVO088, twin screw extruder line, Stainless Steel, product hopper w/screw auger conveyor, 2018
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Clextral
Model: EVO088
Year: 2018
Used extruder for sale, Manufacturer: Clextral, Model: EVO088, Year: 2018, Speed: 800 RPM, Screw diameter: 3.46", Material: Stainless Steel, Voltage: 480, Frequency: 60hz, Phase: 3, Running Hours: 7661, Spare parts and electrical cabinets and controls included, Includes:, -WAM Industrial Paddle Blender, Model ...more
Werner & Pfleiderer #ZSK40, co-rotating twin screw extruder, 40mm, 46:1 L/D, 50 HP, 1990
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Werner & Pfleiderer
Model: ZSK-40
Year: 1990
Used Werner & Pfleiderer model ZSK40, 40mm co-rotating twin screw extruder. 1990 model year. 46:1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/2100 rpm DC motor with SCR control and with a screw speed of 517 rpm. Includes Acrison 1.5 hp weight loss ...more
53" mm Werner & Pfleiderer #ZSK53, twin screw extruder, co-rotating, 40:1 L/D, elec.heated, wtr.cld, 345 RPM screw, ctrl.panel, #45141
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Werner & Pfleiderer
Model: ZSK53
Used Werner & Pfleiderer twin screw extruder, model ZSK53, 53mm twin screws, co-rotating, 40:1 L/D, electrically heated, water cooled barrel with (7) barrel sections, 60 hp dc motor, thru gear box with 5:1 ratio, approximately 345 rpm screw speed, with control panel and spare screw segments, serial # 227916, work# ...more
16" Moriyama #2TE500-120 conical twin screw extruder, 3" OD discharge, 18" L jacketed barrel, 120 HP, 1986
G-2000 Inc | Toledo, OH
Category: Extruders and Extrusion Lines
Seller: G-2000 Inc
Location: Toledo, OH
Mfr: Moriyama
Model: 2TE500-120
Year: 1986
, Hopper Opening.: 25" x 40", Jacketed Barrel.: 18" L, Tapered Twin Screw Design.: 16" OD & Feed, Discharge.: 3" OD, Motor.: 120 HP (90 kW), Hansen Gearbox Reduction.: 32.23:1, Machine Type.Extruders Manufacturer.MORIYAMA Model.2TE500-120 Year.1986 Condition.Used.
W & P #ZDS-K28, Twin Screw Extruder, 28mm, 31" long, 5 barrel sections, 1978
Ingalls Process Equipment | Painesville, OH
Category: Extruders and Extrusion Lines
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: W & P
Model: ZDS-K28
Year: 1978
One (1) used Werner Pfleiderer Twin Screw Extruder Model ZDS-K28, Serial number 513991, built 1978 Co-rotating Screws, side by side 28 mm screws Screw length: 31" long (787.4mm) center of feed throat to end of screws 5 barrel sections (2 are vented and plugged) Electrically heated, water cooled die W & P ...more
.63" Thermo Electro Corp #Prism-Thermo-PharmaLab-16 co-rotating twin screw extruder
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Thermo Electro Corp
Model: PRISM-THERMO-PHARMALAB-16
Used Thermo Electro Corp Prism Thermo PharmaLab 16 Co-Rotating Twin Screw Extruder, Max Speed 1000 RPM, Speed Range 10 to 1000 rpm with 18NM per shaft, Electrical requirement, IP rating IP 54, Pressure 150 bar, Throughput HME: 0.5-5 kg/h/TSG: 1-15 kg/h (depending on formulation., Maximum Torque 18Nm/Screw, (7) Barrel ...more
2.55" Cincinnati Milacron #E65, conical twin screw extruder, 22:1 L/D ratio, 50 HP Reliance AC motor, 1999
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cincinnati Milacron
Model: E65
Year: 1999
Product s, Used 65MM Cincinnati Milacron CM65 Conical Twin Screw Extruder, 22:1 L/D Ratio, 7-33 RPM Screw Speed, Milwaukee Gearbox, 50 HP Reliance AC Motor With Reliance GV3000/SE Inverter Drive, 4 Barrel Heating Zones, 3 Barrel Cooling Zones, 6 Dies Zones, 1 Screw Zone, New In 1999, S/N E65A0200003, 25237 Hours ...more
Leistritz #ZSE18HP-40D, twin screw extruder, 18mm, 9.4 kW motor, 400 V, 2006
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Leistritz
Model: ZSE18HP-40D
Year: 2006
Used Leistritz twin screw pharma extruder, model ZSE18HP-40D, co rotating, no barrel or screws, 9.4 kW motor, 400 volt, with heater control rail, Allen-Bradley Touchscreen controls, serial# 3532, built 2006.
Baker #MP-19-TC, Twin Screw Extruder, 40:1 L/D, 19 mm diameter Screw, 2 kW, 500 RPM, 220 V, 1999
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Baker
Model: MP-19-TC
Year: 1999
Used 19 MM APV Baker Perkins twin screw co rotating extruder, model MP-19-TC, 19 mm diameter screws, 40:1 l/d, electrically heated, water cooled barrel, split barrel design, 2 kw dc motor, 500 rpm screw spped, with Ktron main feeder, (2) Brabender auxiliary feeders, (3) Zenith melt pumps, FTS chiller, external control ...more
Xplore Technology #MC15, conical twin screw extruder, ml batch sizes, siemens controls, 200-245 V
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Xplore Technology
Model: MC15
Used DSM Xplore Technology conical twin screw micro compounder extruder, model MC15, up to 15 ml batch sizes, vertical orientation with jacketed feed section and barrel, with Siemens controls, 200-245 volt, CE rated, serial# 15-08-14.
W & P #ZSK-30, Twin Screw Extruder, 36" long barrel, 3 top vents, 6 KW DC drive, 1980
Ingalls Process Equipment | Painesville, OH
Category: Extruders and Extrusion Lines
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: W & P
Model: ZSK-30
Year: 1980
One (1) used W & P Twin Screw Extruder. Werner & Pfleiderer Model ZSK-30, built 1980 36" long barrel, 3 top vents 6 kW DC drive Segmented screws Co-rotating die On cabinet, with casters.
Werner & Pfleiderer #ZSK57, 27:1 L/D, 50 HP, 400 PPH, screws twin bi-lobal, complete
L C Mayfield Associates Inc | Crosby, TX
Category: Extruders and Extrusion Lines
Seller: L C Mayfield Associates Inc
Location: Crosby, TX
Mfr: Werner & Pfleiderer
Model: ZSK-57
Leistritz #MIC18PH/GL-35D, Twin Screw Extruder, 35:1 L/D, 18 mm diameter Screw, 2.2 kW, 2950 RPM, 230/400 V, 6 barrel sections, 2002
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Leistritz
Model: MIC18PH/GL-35D
Year: 2002
Used Leistritz twin screw extruder, model MIC18PH/GL-35D, 18 mm screws, co-rotating screws, 35:1 l/d, 500 rpm screw speed, electrically heated, water cooled barrel, 2.2 kw, 230/400 volt, 2950 rpm motor with VFD controller, (6) barrel sections with (1) jacketed feed, (2) vented and plugged, (4) non vented barrel ...more
Leistritz #MIRO18GL, twin screw extruder, 20:1 L/D, electrically heated, water cooled, 1.5 hp, 2006, #3076-9, 2006
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Leistritz
Model: MIRO18GL
Year: 2006
Used Leistritz twin screw pelletizing line, with model Nano-16 extruder, 16 mm diameter screws (no screws), co-rotating, 20:1 L/D, electrically heated, water cooled barrel, 1.5 hp, 208 volt motor, with unified barrel with (2) vented and (1) non vented section, jacketed feed section, on board control panel with (4) ...more
2.36" Leistritz #ZSE-60-GL-36D, twin screw extruder / complete line, co-rotating, 8 hopper blender, 9 barrel segments, 2001
Dalton Machinery | Rocky Face, GA
Category: Extruders and Extrusion Lines
Seller: Dalton Machinery
Location: Rocky Face, GA
Mfr: Leistritz
Model: ZSE-60-GL-36D
Year: 2001
Werner & Pfleiderer #ZSK-57-W50P, co-rotating twin screw 57mm Carbon steel compounding extruder
Frain Industries | Carol Stream, IL
Category: Food Extruders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Werner & Pfleiderer
Model: ZSK-57-W50P
Werner & Pfleiderer, Co-rotating twin screw, 57mm carbon steel compounding extruder with optional high torque drive rated at up to 350 kg per hour – depending on materials and application. L to D ratio 34:1 (9) 7" long jacketed barrel sections for heating and cooling, 3.5" diameter feed area with ...more
12" Christian Engineering, Extruder/Mixer, twin screw, Stainless Steel, 5' 6" L screws, 4' 6" L jacketed mixing section, 7.5 HP, 220/440 V
Machinery & Equipment Co | Brisbane, CA
Category: Extruders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Christian Engineering
Extruder/mixer twin screw, stainless steel, 12" diameter x 5'6" long screws, jacketed mixing section measuring 4'6" long, screws are driven with 7-1/2 HP 220/440 volt motor through vari drive and gear reducer. Heavy duty design, manufactured by Christian Engineering, last used on clays and mud. No nameplate ...more
Baker #MP, Mixer, continuous, twin screw, 5" diameter x 36" L screws, 150 psi @ 338 F jacket, 15 HP, 63.3-190 RPM output
Machinery & Equipment Co | Brisbane, CA
Category: Food Extruders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Baker
Model: MP
Mixer, Baker Perkins, model MP, multi purpose, twin screw, 5" diameter screws x 36" long, with all edges of wetted parts being type 316 stainless steel, the remainder is carbon steel. The units are jacketed for 150 PSI @ 338 degrees, 15 HP motor to Reeves vari-speed drive with a final output of 63.3 RPM up to 190 RPM. ...more
JUST ADDED!
Leistritz #ZSE27PH Pharma, Twin Screw Extruder, Pelletizing Line, with Puller Cutter, 27 MM
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Leistritz
Model: ZSE27PH
Used Leistritz Pharma Twin Screw Extruder, model ZSE 27HP-PH, with Puller Cutter, model: cutting plant CC600 FDA TWIN, Cooling Conveyor serial number 30132-2201-01 (AutoPAK), Coperion K-Tron, model: D5 Scale..
Berstorff, 40mm, twin screw pelletizer line, feeder, extrude, electrically heated water cooled, circ.pump, VFD controller, #48335
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Berstorff
Used 40 mm Berstorff twin screw strand pelletizing line consisting of one (1) Techweigh volumetric feeder with motor drive, one (1) 40 mm Berstroff twin screw extruder, model ZE40A HT, electrically heated, water cooled barrel, 30:1 L/D, top vented, 50 hp dc drive with control panel with scr controller, one (1) 5 hp ...more
10" diameter x 8' long, Twin Screw Feeder, Stainless Steel, #2730-12
Federal Equipment Company | Cleveland, OH
Category: Screw Type Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: TWIN SCREW FEEDER
Used 10" Twin screw feeder, stainless steel construction, with (2) 5" diameter x 102" long inter-meshing co-rotating screws, 10" wide trough, 1.5" screw pitch, 6" x 9" feed opening, 3" outlet, (8) side injection ports, hinged top cover, mounted on stainless steel frame, driven by 7.5 ...more
36" diameter x 27' long, Twin screw 36" hollow screw augers, 27' long dual shaftless conveyor
Machinery Scene | Toledo, WA
Category: Screw Type Conveyors
Seller: Machinery Scene
Location: Toledo, WA
Model: TWIN SCREW 36HOLLOW SCREW AUGERS
twin screw 36" hollow screw auger conveyor, 6ft wide screw conveyor, dual 36 inch screw conveyor, double 36" x 27ft hollow screw conveyor, Dual 36" shaftless hollow screw auger conveyor, inside length 27 feet 6 inches, inside width 6 feet 2 inches, overall outside length of conveyor 30ft 10 inches, conveyor ...more
Sunds Defibrator, Twin Screw Feeder Conveyor Chip Drainer, 240" L x 12' width x 13' H, 35 RPM Conveyor, 15 HP - 1750 RPM
Lenmark Industries | Langley, BC
Category: Screw Type Conveyors
Seller: Lenmark Industries
Location: Langley, BC
Model: TWIN SCREW FEEDER CONVEYOR CHIP DRAINER
SKU: 112194, Condition: Used, Additional :, Dimensions:, - 20 ft. long, - 12 ft. wide, - 13 ft. high, Drive Information, Configuration: 2 pairs, motor & gear reducer, Motor: 15 hp, 1750 rpm, Sheave Ratio: 2.01:1, Reducer Ratio: 25:1, Conveyor Speed: 35 rpm.
24" diameter x 13.33'/19.33' long, Carbon Steel Screws for Screw Conveyor, 6.5" diameter Center shaft, 1/2" thick flites w/21.75" spacing (2 available)
Machinery & Equipment Co | Brisbane, CA
Category: Screw Type Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: C/S SCREWS FOR SCREW CONVEYOR
(2) Carbon steel Screws for screw conveyor, screws only. Available: 24" diameter x 13'4" and 24" diameter x 19'4" sections. Units have 6-1/2" diameter center shaft, approx. 1/2" thick heavy duty flites, with 21-3/4" spacing between flights. Shafts are set for 4" diameter stub shafts. Units last run in mining ...more
12" diameter x 6.1' long, Screw Conveyor, 1 HP, 1725 RPM, butterfly valve, mounted on stand
G-2000 Inc | Toledo, OH
Category: Screw Type Conveyors
Seller: G-2000 Inc
Location: Toledo, OH
Model: SCREW CONVEYOR
, Intake Diameter.: 10", Discharge Diameter.: 12", Trough.: 12" W x 13" D, Length.: 82", Butterfly Valve, Mounted on Stand, Machine Type.Conveyors Manufacturer.N/A Model.N/A Year.N/A Condition.Used.
Screw Conveyor, 7" w x 25' 6" l, 2' x 8" width inlet, 7" outlet, 1.5 HP, 1690/1710 RPM, 208-230/460 V. motor
EcReCon Inc. | Pedericktown, NJ
Category: Screw Type Conveyors
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Model: SCREW CONVEYOR
, used 7" wide X 25'6" Lgth Screw conveyor. Has stainless Steel Trough and carbon steel screw. Inlet is 2' x 8" wide. 7" outlet. 1.5 HP, 1690/1710 rpm, 208-230/460 volt motor into gear reducer with 124:1 ratio. Approx 14 RPM output.,., Type. SCREW.
Screw Conveyor, 7" w x 27' 6" l, 2' x 8" width inlet, 7" outlet, 1.5 HP, 1690/1710 RPM, 208-230/460 V. motor
EcReCon Inc. | Pedericktown, NJ
Category: Screw Type Conveyors
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Model: SCREW CONVEYOR
, used 7" wide X 27'6" Lgth Screw conveyor. Has stainless Steel Trough and carbon steel screw. Inlet is 2' x 8" wide. 7" outlet. 1.5 HP, 1690/1710 rpm, 208-230/460 volt motor into gear reducer with 124:1 ratio. Approx 14 RPM output.,., Type. SCREW.
Screw Conveyor, 7" w x 4'10" l, 6" outlet, 1 HP, 1750, 230/460 V. motor
EcReCon Inc. | Pedericktown, NJ
Category: Screw Type Conveyors
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Model: SCREW CONVEYOR
, used 7" wide X 4'10" Lgth Screw conveyor. Has stainless Steel Trough and carbon steel screw. 6" outlet. 1 HP, 1750, 230/460 volt motor into gear reducer.,., Type. SCREW.
7.5" wide x 7.3' long, Screw conveyor, U-shaped trough, 6" inlet/outlet, belt driven
Ingalls Process Equipment | Painesville, OH
Category: Screw Type Conveyors
Seller: Ingalls Process Equipment
Location: Painesville, OH
Model: SCREW CONVEYOR
One (1) used 7.5' Screw Conveyor U-shaped trough, 7.5" wide x 87" long Flat, bolt-on top with hinged access doors 6" inlet and outlet Center of inlet to center of outlet: 74" 3 HP Baldor motor, 208-230/460V Belt driven to shaft mounted Dodge gear reducer 3" diameter heavy duty shaft with ...more
10" diameter x 16.5' long, Screw Conveyor, Carbon Steel, w/ U-shaped trough
Machinery & Equipment Co | Brisbane, CA
Category: Screw Type Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: SCREW CONVEYOR
Carbon steel screw conveyor, measures 10" diameter X 16'6" Long Screw Conveyor. Includes carbon steel U-shaped trough with 10" diameter x 16'6" long mild steel screw. Open top. Less motor and drive assembly. Last used in saw dust application., Measurements: 10" Diameter X 16'6" Long, Materials of ...more
4" diameter x 14.5' long, Screw Conveyor, Carbon Steel, 15' L conveyor w/5" diameter Discharge, 48" x 48" x 38" deep hopper, 3 HP, 1740 RPM, 115/230 V.
Machinery & Equipment Co | Brisbane, CA
Category: Screw Type Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: SCREW CONVEYOR
Screw Conveyor with Explosion proof motor and carbon steel hopper. Includes 4" diameter x 14'6" long screw, carbon steel conveyor tube measuring 15' long with 5" diameter discharge, and carbon steel hopper measuring 48" X 48" X 38" deep. Screw driven by 3 HP, 115/230 Volt, single phase, 60 Hz, 1740 RPM motor ...more
6" diameter x 5' long, Screw Conveyor, Carbon Steel, incline type, 45° Angle, 12" x 12" hopper feed, 4" x 4" discharge
Machinery & Equipment Co | Brisbane, CA
Category: Screw Type Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: SCREW CONVEYOR
Screw conveyor, 6" diameter x 5' long, incline type for operation at 45 degree angle. Unit designed to run inclined on 45 degree angle with 12" x 12" hopper feed, 4" x 4" discharge. Unit has carbon steel contact parts and is in good condition, close tube type, less end plate, less drive., Type: Tubular Conveyor ...more
7.5" diameter x 4' long, Screw Conveyor, Stainless Steel, 8" width Stainless Steel trough, 6" diameter Inlet, 5"/8" outlets, 1/15 HP, 90 V.
Machinery & Equipment Co | Brisbane, CA
Category: Screw Type Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: SCREW CONVEYOR
Stainless steel screw conveyor, screw measures 7-1/2" diameter x 4' long, 8" wide stainless steel trough. Includes 6" diameter inlet, with (1) 5" & (1) 8" outlets. Driven by 1/15 HP, 90 volt, 1-phase motor. Includes top stainless steel cover. Previously used at spice processing and packaging facility., HP: ...more
9.5" diameter x 5.75' long, Screw Conveyor, Stainless Steel, 10" width trough, 10" diameter In/out, 1.5 HP, 1720 RPM, 230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Screw Type Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: SCREW CONVEYOR
Stainless steel screw conveyor, screw measures 9-1/2" diameter x 5'9" long, 10" wide stainless steel trough. Includes 10" diameter in/out. Driven by 1.5 HP, 230/460V, 1720 RPM, 3/60Hz motor thru gearbox with manual speed control. Drive end is mounted on mild steel stand with legs. Previously used at spice ...more
JUST ADDED!
6" wide x 7' long, Screw conveyor, Stainless Steel, less motor
Machinery & Equipment Co | Brisbane, CA
Category: Screw Type Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: SCREW CONVEYOR
Stainless steel screw conveyor, screw measures 6" diameter X 7' long, with 7" wide X 8" deep stainless steel trough. Less drive. Last used at dried fruit processing facility., HP: Less Drive, Type: Stainless Steel Screw Conveyor, Measurements: 6" Diameter X 7' Long, Materials of Construction: Stainless Steel ...more
JUST ADDED!
6" wide x 10' long, Screw conveyor, Stainless Steel, with drive
Machinery & Equipment Co | Brisbane, CA
Category: Screw Type Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: SCREW CONVEYOR
Stainless steel screw conveyor, screw measures 6" diameter X 10' long, with standard screw pitch, 7" wide stainless steel trough. Screw includes gearhead motor rated for 1725 RPM, 208-230/460V, 3/60Hz motor, thru gear reducer. Last used at dried fruit processing facility., HP: 0.75 HP (Estimate), Type: Stainless ...more
JUST ADDED!
9" wide x 8.3' long, Screw conveyor, Stainless Steel, with drive
Machinery & Equipment Co | Brisbane, CA
Category: Screw Type Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: SCREW CONVEYOR
Stainless steel screw conveyor, screw measures 9" diameter X 8'3"' long, 10" wide X 10" deep stainless steel trough. Screw is driven by gearhead motor. Includes 10" x 10" bottom-end discharge. Offered with stainless steel grate cover running along top. Last used at dried fruit processing facility., HP: 3/4 HP ...more
Gildemeister #Twin-32, twin spindle, 2 turrets, 2 Y-Axis spindles, live tools
TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Orange, CA
Mfr: Gildemeister
Model: TWIN-32
Number of axis total 4, Number of spindles 2. Upper Turret: Longitudinal travel (Z-axis) 320 mm, Transversal stroke (X axis) 220 mm. Sub Spindle: Spindle speeds: Stepless, 40/8000 rpm 21KW. Swing over cross-slide 100 mm, Swing over bed 145 mm..
20" diameter x 16.9' long, Spaans screw conveyor, Stainless Steel, 5 HP, 20" x 20" bottom discharge, serial #1986B, #3192-1
Federal Equipment Company | Cleveland, OH
Category: Screw Type Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: SPAANS SCREW CONVEYOR
Used Spaans screw conveyor, approximately 20" wide x 201" long trough, with 14" pitched screw conveyor, driven by 5 hp, 230/460 volt motor, 20" x 20" bottom end discharge, outboard roller bearings, packing glad seals, 261" overall length, serial# 1986B.
24" diameter x 18' long, Spaans screw conveyor, Stainless Steel, 5 HP, 24" x 24" bottom discharge, serial #1986F, #3192-20
Federal Equipment Company | Cleveland, OH
Category: Screw Type Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: SPAANS SCREW CONVEYOR
Used Spaans screw conveyor, approximately 24" wide x 216" long trough, with 15" pitched screw conveyor, driven by 5 hp, 230/460 volt motor, 24" x 24" bottom end discharge, outboard roller bearings, packing glad seals, 277" overall length, serial# 1986F.
20" diameter x 16.9' long, Spaans screw conveyor, Stainless Steel, 261" OA length, 5 HP, 20" x 20" bottom discharge, #3192-3
Federal Equipment Company | Cleveland, OH
Category: Screw Type Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: SPAANS SCREW CONVEYOR
Used Spaans screw conveyor, approximately 20" wide x 201" long trough, with 14" pitched screw conveyor, driven by 5 hp, 230/460 volt motor, 20" x 20" bottom end discharge, outboard roller bearings, packing glad seals, 261" overall length.
24" diameter x 65.4' long trough, Spaans screw conveyor, Stainless Steel, 15" pitched screw conveyor, driven by 20 hp, 230/460 V., #3192-7
Federal Equipment Company | Cleveland, OH
Category: Screw Type Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: SPAANS SCREW CONVEYOR
Used Spaans screw conveyor, approximately 24" wide x 785" long trough, with 15" pitched screw conveyor, driven by 20 hp, 230/460 volt motor, end discharge, outboard roller bearings, packing glad seals, serial# 1986C1.
12" diameter x 12' long, Schneckenbau Screw Conveyor, type RS300/3700, Carbon Steel, 2012, #3429-2, 2012
Federal Equipment Company | Cleveland, OH
Category: Screw Type Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: SCHNECKENBAU SCREW CONVEYOR
Year: 2012
Used 12" Schneckenbau tubular screw conveyor, type RS300/3700, carbon steel construction, approximately 12" diameter x 144" long, 2.2 kw, 460 volt motor drive, serial# 12/4920, built 2012.
8" diameter x 21' long, Screw Auger Conveyor, 8" x 8" outlet on driven end, 9" pitch
JM Industrial LLC | Millwood, WV
Category: Screw Type Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Model: SCREW AUGER CONVEYOR
Used 8" dia. x 21' Long Paddle Conveyor Mixer, Flanged, three-section U-trough with foot mounting, 8" x 8" Outlet on driven end, 4" Outlet near non-driven end, 9" Pitch, 21'-4" total length between endplates of trough.
3" diameter x 12.9' long, Flexible Screw Conveyor, 4.5" tube, 5 HP, 1" flat flights, 18.5" x 24.5" feed hopper
Ingalls Process Equipment | Painesville, OH
Category: Screw Type Conveyors
Seller: Ingalls Process Equipment
Location: Painesville, OH
Model: FLEXIBLE SCREW CONVEYOR
One (1) used 3" diameter Flexible Screw Conveyor Stainless steel flexible screw and tube Flexible screw is 3" diameter x 12' 9" long Tube is 4.5" OD 1" flat flights 5 HP gear reduced drive, 3 phase, 208-230/460 voltage Feed hopper is 18.5" x 24.5" - stainless steel and flanged ...more
10" diameter x 19.5' long, Tubular screw conveyor, Carbon Steel, 5 HP, 1750 RPM motor
Machinery & Equipment Co | Brisbane, CA
Category: Screw Type Conveyors
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Model: TUBULAR SCREW CONVEYOR
Tubular screw conveyor, measures 10" diameter X 19'6" long Screw Conveyor. Carbon steel tube with 10 x 19'6" carbon steel screw. Includes 10" x 12" inlet and 11" x1 0" discharge. Driven by 5 HP, 208-230/460V, 3ph/60hz, 1750 RPM motor thru Dodge gear reducer, ratio 5.62 to 1, thru v-belt assembly. Last used in ...more
10" diameter x 17' long, Tubular screw conveyor
JM Industrial LLC | Millwood, WV
Category: Screw Type Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Model: TUBULAR SCREW CONVEYOR
Used 10" dia. X 17'L Tubular Screw Conveyor, Overall dimensions: 18'-4" L x 26" W x 24" H., Weight = 790 LBS.
12" diameter x 9' long, tubular screw conveyor, 10'-4" between endplates, 9'-0" between inlet/discharge
JM Industrial LLC | Millwood, WV
Category: Screw Type Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Model: TUBULAR SCREW CONVEYOR
Used 12" Diameter X 9 ft Long Tubular Screw Conveyor, All carbon steel tubular housing with hinged & gasketed clamshell bottom drop-out with safety switch, Product Inlet/Discharge: 12" flanged, Housing length is 10'-4" between endplates, 9'-0" between inlet/discharge centers, Auger shaft is ...more
10-1/4" diameter x 15' long, Shaftless hollow screw, spiral screw auger conveyor
Machinery Scene | Toledo, WA
Category: Screw Type Conveyors
Seller: Machinery Scene
Location: Toledo, WA
Model: SHAFTLESS HOLLOW SCREW
shaftless screw conveyor, shaftless spiral conveyor, shaftless tapered screw auger, used shaftless screw conveyors, hollow screw conveyor, used spiral screw auger conveyor., shaftless spiral conveyor inside length 14ft 9 inches overall outside length 16 ½ ft+-, trough width 10 ¼ inch ID. outside width ...more
12" diameter x 36' long, Screw auger conveyor, includes covers
Machinery Scene | Toledo, WA
Category: Screw Type Conveyors
Seller: Machinery Scene
Location: Toledo, WA
Model: SCREW AUGER CONVEYOR
Used 36 ft long x 12 diameter screw auger conveyor, 7 HP U.S Motors: 230/460 volt, Trough inside width: 13, Flight spacing 12, Flight thickness: 3/16, Top inlet size: 2ft x 3ft long, Bottom discharge outlet: 1ft x 1ft, 2 carrier bearings on screw shaft with grease fittings routed outside of covers, Screw shaft ...more
4" diameter x 15' long, Flexible Screw Conveyor, Stainless Steel, (2) 4" diameter Tubes, 3.875" diameter x 12' 8" L & 3.687" diameter x 17' 10" L screws, 29" x 29" x 30" deep hopper, 5 HP, 1750 RPM, 230/460 V.
Machinery & Equipment Co | Brisbane, CA
Category: Screw Type Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: FLEXIBLE SCREW CONVEYOR
Flexible screw conveyor, stainless steel, 4" diameter, includes (2) 4" diameter tubes, 12' & 15' long and (2) screws - 3.875" diameter x 12'8" long and 3.687" diameter x 17'10" long. Unit is offered with carbon steel hopper measuring 29" x 29" x 30" deep to 60-degree cone bottom. Screw is driven by ...more
4" diameter, Screw Auger Feeder, Stainless Steel, 4" x 32" covered hopper, 4" x 32" L screw, 1/4 HP, 1725 RPM, 208-230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Screw Type Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: SCREW AUGER FEEDER
Stainless steel screw auger feeder, unit has a 20" x 32" covered hopper over a 4" x 32" long stainless steel screw. Motor is 1/4 HP, 1725 RPM, 208-230/460V, 60Hz, 3-phase. Very good condition., HP: 0.25, Materials of Construction: Stainless Steel, Basis: FOB, Screw Dimensions: 4" Diameter X 32" Long.
12" diameter, Carbon Steel screw conveyor, 3 HP, 230/460 V., 3-phase
JM Industrial LLC | Millwood, WV
Category: Screw Type Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Model: C/S SCREW CONVEYOR
Used 12" Dia. x 34' Long Industrial Screw Conveyor, Auger: Carbon steel with standard pitch flighting, 1/8" thick., Trough: Stainless steel, three-section flanged U-trough with twin drop-outs, hanger bearings at connections., Multiple belly patches on trough using continuous fillets welds., Discharges: ...more
6" diameter x 4.6' long, Dual screw feeder, dresser, gearbox 1/2 HP Baldor AC motor, s/n #3388
Arlington Machinery | Lake Zurich, IL
Category: Screw Type Conveyors
Seller: Arlington Machinery
Location: Lake Zurich, IL
Model: DUAL SCREW FEEDER
Product s, 54" L x 6" Dia. Dual Screw Feeder, S/N 3388, Dresser Gearbox, 1/2 HP Baldor AC Motor, 208-230/460, Three Phase, Approximate Dimensions: 72" L x 30" W x 22" H.
16" diameter x 16' long, Stainless Steel screw conveyor, 16" pitch, 17" flanged discharge
JM Industrial LLC | Millwood, WV
Category: Screw Type Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Model: S/S SCREW CONVEYOR
Used 16" Dia. X 16' L Stainless Steel Screw Conveyor, Stainless steel, two-section U-trough with cover., Diameter: 16 inches, Pitch: 16 inches, Trough Length: 16'-0", Flanged Discharge: 17" square, 3HP gearmotor/chain drive (230/460V, 60Hz, 3ph.), Weight = 1,310 LBS.
4" diameter, Stainless Steel screw feeder
JM Industrial LLC | Millwood, WV
Category: Screw Type Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Model: S/S SCREW FEEDER
Used 4" dia. Stainless Steel Screw Feeder, All product contact surfaces are stainless steel., 0.5 cubic foot loading hopper, 13" X 14" opening, Auger: 4.0" helical auger, end drop-out, 51 RPM (max), Drive: 2HP gearmotor, Mild steel base (18"W X 36"L)., Auger center axis is approximately ...more
6" diameter x 7' long, Stainless Steel screw conveyor, 7" flanged discharge
JM Industrial LLC | Millwood, WV
Category: Screw Type Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Model: S/S SCREW CONVEYOR
Used 6" Dia. X 7'L Stainless Steel Screw Conveyor, Stainless steel U-trough with 48" length of cover and extended height., Auger Diameter: 6" with standard pitch, light duty flighting, Trough Length: 7'-6 1/2", Flanged Discharge: 7" square, 1HP gearmotor & chain drive (230/460V, 60Hz ...more
4" Flexicon, flex screw conveyor, drive head & loading hopper
JM Industrial LLC | Millwood, WV
Category: Screw Type Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Model: FLEX SCREW CONV.
Used 4" Flexicon Flex Screw Conveyor Drive Head and Loading Hopper [PART], Stainless stel and polyethylene in contact with product., 5HP geared drive head with cover and a 5.75" O.D. polyethylene discharge., Loading end hopper, 14" X 22" with proximity sensor and 1/2HP agitator, mild steel support ...more
13" x 10' Long, Screw Auger Conveyor
Revelation Machinery | Chicago, IL
Category: Screw Type Conveyors
Seller: Revelation Machinery
Location: Chicago, IL
Model: SCREW AUGER CONVEYOR
Year: 1900
Make: NA, Model: 10AC, Year: 1900, Machine Location: New Jersey, Total Length: 10', Auger Screw: 13" blade to blade gap.
Morrison 10' long, Screw Bottle Conveyor, 1250 RPM
Federal Equipment Company | Cleveland, OH
Category: Screw Type Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: SCREW BOTTLE CONVEYOR
Used Morrison 10' Screw Bottle Conveyor XP.
40" Davis / Brown, in-line extrusion & thermoforming line, 3.5" extruder, 1996, #16467J
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Brown
Year: 1996
Product s, 40" Brown model B4042 thermoforming line with, B4042 former and T340 trim press. New 1996, Brown model B4042 in line thermoformer with 3 roll cooling rolls., 40 x 42" Brown servo thermoformer with upgraded servo drives., Max daylight of 6" up and down., 40" wide Brown model T340 trim press with canopy servo ...more
1.57" Kiefel Technologies Lowboy, extruder w/ die, rotating cart calibration cage & takeoff, #16835A
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Kiefl
Model: M1000-C
Product s, 40mm Kiefel Lowboy Extruder, 26:1 L/D, With Die,Rotating Cart Calibration Cage and Takeoff, Air Cooled Extruder, 3 Barrel Zones, 42 HP AC Vector Drive, Extruder Controlled With Kirion C Automation, 15" Touch Screen Display, Extrduer Comes With BD Plast Manual Screen Changer(New In 2014), 80MM Die With Spare ...more
43" Brown, dual flywheel trim press, 12.5" opening, oper.controls, AC motor, multi-speed gearbox, belt drive to flywheels, #37688
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Brown
Model: 37688
Used 43" x 12.5" opening Brown dual fly wheel trim press with operator controls, AC motor with multi-speed gearbox belt driven to flywheels.
Zumbach #KW20, surface fault detector, 2.5" W aperture w/2" W opening, idler rollers, #45257
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Zumbach
Model: KW20
Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 7142.0002.
Zumbach #KW20, surface fault detector, 2.5" W aperture w/2" W open, idler rollers, serial #2795.1535, #46250
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Zumbach
Model: KW20
Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 2795.1353.
Zumbach #KW20, surface fault detector, 2.5" W aperture w/2" W open, idler rollers, serial #3072.1594, #46247
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Zumbach
Model: KW20
Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 3072.1594.
Zumbach #KW20, surface fault detector, 2.5" W apperture w/2" W opening, idler rollers, serial #2709.1262, #45511
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Zumbach
Model: KW20
Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 2709.1262.
Zumbach #KW20, surface fault detector, 2.5" W apperture w/2" W opening, idler rollers, serial #3072-1559, #45513
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Zumbach
Model: KW20
Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 3072.1559.
Zumbach #KW20, surface fault detector, 2.5" W appeture w/2" W opening, idler rollers, #46249
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Zumbach
Model: KW20
Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 2506.103.
Zumbach #KW20, surface fault detector, 2.5" W apperture, 2" W opening w/idler rollers, #46248 (14 available)
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Zumbach
Model: KW20
Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 7652.0006.
11" Gloucester #GEC, Mini-Separator, 480 V., 3-Ph., Blown Film Downstream, #47652
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Gloucester
Model: GEC
Used 12" Gloucester Mini separator, 480V, 3 phase.
12" Gloucester #406, Mini-Separator, 480 V., 3-Ph., Blown Film Downstream, serial #24108-03, 8/1979, #47657
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Gloucester
Model: 406
Used 12" Gloucester Mini Separator, model 406, 480V, 3 phase, serial# 24108 03, built 8/1979.
1/4" Brabender extruder, elec.heated, air cooled barrel, 48:1 L/D, 2 HP, 180 V., VFD, controls on frame, #49243
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Brabender
Model: 49243
Used 0.25" Brabender extruder, electrically heated, air cooled barrel, 48:1 L/D, driven by 2 hp, 180 volt motor with VFD, controls on frame.
20" Macro Engineering and Technology, Inc., coiler/winder, #2618-2
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Maco Engineering
Model: 2618-2
Used Macro Engineering and Technology Inc. turret winder, model ME-T.W.-20-3HP-100, 20" long stainless steel and rubber rolls, 2.55 kW (3.42 hp) spindle and turret motors, with VFDs and PLC controls, serial# TIC-8232, built 8/2000 with attached slitter station, model ME Trim Sltt, 20" chrome, rubber and carbon ...more
1" Killion, single screw extruder, 24:1 L/D, air cooled barrel, 3 HP DC motor, #18408A
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Killion
Product s, Used 1.0" Killion Extruder, 24:1 L/D, 3 HP DC Motor, 24:1 L/D Ratio, Air-Cooled Barrel, 17: Approximate Gearbox Ratio, 3 Barrel Zones, 1 Die Zone, Eurotherm Temperature Controllers, 3 HP GE DC Motor With Control Techniques Drive, 3 HP DC Motor And DC Drive, 42" Centerline, Includes Screw, S/N N5222 ...more
6" Troester / Monsanto cold feed rubber extruder, 18:1 L/D, 250 HP, power roll feed
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Troester
One (1) Used Troester / Monsanto 6" 150mm Cold Feed Rubber Extruder, 18:1 L/D, 250 HP, 1750 RPM, 500V DC motor, power feed roll, straight delivery head, pneumatic clamp, direct drive, S/N 760805.
Davis Standard #MV35IN35SR, extruder, 7 zone, electrically heated, water cooled, 1987
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Davis Standard
Model: MV35IN35SR
Year: 1987
107364, One (1) Used Davis Standard Extruder Model MV35IN35SR, L/D BARREL HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP), AND SIDE VENTED BARREL AT A 52" CENTERLINE HEIGHT. GEARBOX HAS A 5.67:1 REDUCTION RATIO AND IS RATED AT 158 HP AT A SERVICE FACTOR OF 1.25. GEARBOX IS BELT DRIVEN BY A 200 ...more
4.5" Sterling #4.5, extruder, 32.1 vented barrel, 200 HP DC, 1980' s
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Sterling
Model: 4.5
Year: 1982
108976, One (1) used Sterling 4.5" extruder, 32.1 vented barrel, (8) heater zones, screw and barrel in good condition, Nordson EH 45 screen changer, 200HP DC motor with gear box, Drive cabinet with cooler., ( no PLC controls) Early 1980's., Good condition., Manufacturer STERLING Model 4.5 Year 1982 Condition Used ...more
6" Gloucester #266-001, water ring pelletizing line, 30:1 L/D, air cooled, jacketed feed section, feed hopper, 1990
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Gloucester
Model: 266-001
Year: 1990
Used 6" Gloucester water ring pelletizing line, with 6" Gloucester extruder, model 266-001, 30:1 L/D, air cooled with Contracool and blower, jacketed feed section, feed hopper, vented barrel, with control panel, machine serial# 266-33392-01, built 1990. Gneub rotary filter screen changer, model SF90, serial# ...more
Adamson United, NFM Welding Engineers calender sheet extrusion line, single screw extruder, 14:1 L/D, 29.2:1 gearbox ratio w/motor, 1999
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Adamson
Year: 1999
Used 48" Adamson United / NFM Welding Engineers calender sheet extrusion line, with Adamson United vertical 130 degree three roll calender mill with top roll offset 50 degrees from vertical, with 18" diameter x 48" roll face, drilled and cored rolls with rotary unions, 64" centerline height, motorized ...more
Hartig extruder, 30:1 L/D pelletizer, used
Alan Ross Machinery Corp | Zion, IL
Category: Extruders and Extrusion Lines
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Hartig
150 HP Motor, 480 Volts, Non-Vented Extruder, Air Cooled, 150 HP Motor, 480 Volts, DC Drive w/ Screen Changer, 4 1/2" Screw & Barrel Diameter, 11' Long Screw.
10" Farrel, hot feed rubber extruder, roller feed style, dump extruder
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
One (1) Used 10" Farrel Hot Feed Rubber Extruder, roller feed, Motor 200 HP, 500 volt, 1750 rpm.
4.5" NRM #Pacemaker III, electrically heated, cooled barrel, 200 HP DC drive, L/D 34:1
Special Projects Int'l, Inc. | Louisville, KY
Category: Extruders and Extrusion Lines
Seller: Special Projects Int'l, Inc.
Location: Louisville, KY
Mfr: Nrm
Model: PACEMAKER III
NRM Pacemaker III 4.5" extruder. Serial # 18031. L/D is 34:1. The vented, electrically heated and water cooled barrel is 12' long with an 8" round feed throat. The screw is driven by a 200 hp, 500 vdc electric motor. This unit has a 5.5" side vent at 6.5' from feed throat. Overall dimensions are 16' long x ...more
3.5" Davis Standard #MV35IN35, extruder w/dual 1.25" co-extruders, 241:1 L/D, 2012
Blades Machinery Co Inc | Elk Grove Village, IL
Category: Extruders and Extrusion Lines
Seller: Blades Machinery Co Inc
Location: Elk Grove Village, IL
Mfr: Davis Standard
Model: MV35IN35
Year: 2012
Stock#: 17744., Davis Standard straw/tubing co-extrusion extrusion package manufactured 10/2012, Last used on three color straws extruding two lanes of straws at one time. Extruders and controls are unitized on a single base. 460/3/60 input power. 278 maximum amp load, A Davis standard model MV35IN35 3.5 24:1 L/D ...more
