Also See: 19 Results
19" x 59" Boeringer Mag #VDF48L, engine lathe, 2.08" spindle bore, 4-jaw 12" chuck, inch/metric, Sony 2-Axis digital read out
Aleco Machinery Sales | Milwaukee, WI
Category: Engine Lathes
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Boeringer
Model: VDF48L
(1) Pre Owned Boeringer (MAG) VDF 48L Engine Lathe, Type 48S Serial Number: 70.1025.0025654, Swing Over Bed 19”, Distance Between Centers 59”, Spindle Bore 2.08”, Spindle Nose (Camlock Type) D1-8, Spindle Speeds 11.2 to 2240 RPM, Main Drive Motor 15 HP AC, Taper Attachment, 12" 4 Jaw Chuck, Inch / ...more
19" x 60" LeBlond #Regal, engine lathe, 12" swing over cross slide, 3-jaw 15" chuck, inch/metric, coolant chip pan, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 9E-530, MODEL. REGAL, MAXIMUM SWING OVER BED. 19-1/4", SWING OVER CROSS SLIDE. 12", DISTANCE BETWEEN CENTERS. 60", SPINDLE SPEEDS. (12) 40-1600 RPM, HOLE THRU SPINDLE. 3-1/16", LONGITUDINAL FEEDS - ENGLISH. (48).0018-.104 IPR, LONGITUDINAL FEEDS - METRIC. (48).05-2.6 MMPR, THREADS ENGLISH. (48) 2-112 TPI ...more
20" -26" x 57" -80" Kent USA #Ml-2060, 2280, HW-26, MD-55, HW-30, Manual Precision Lathe, new, (7 available)
Blumberg Machinery Co | Bannockburn, IL
Category: Engine Lathes
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Kent
Model: ML-2060
20" x 44" KENT USAML-2060VTMANUAL PRECISION LATHE - NEWPRODUCT HIGHLIGHTS7.5 HP Spindle Motor, 12-Speeds3.125 Spindle Through HoleSolid Full Length Casting Base with Front Loading Chip Tray for Easier CleaningAdjustable Over-load Feed ClutchesQuick Reversal Feed from ApronFull-length Safety Foot BrakeSpindle Jog ...more
20"/24" x 57" Milltronics #HML2060, engine lathe, 12" gap length, 3" hole, 30-2200 RPM, thread dial, taper attachment, 6" Steady Rest
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Milltronics
Model: HML2060
SERIAL. 2060305346, MODEL.HML2060, SWING. 20", CENTERS. 57", SWING OVER CROSS. 14", SWINN IN GAP. 24", GAP LENGTH. 12", DIAMETER OF SPINDLE HOLE. 3", SPINDLE SPEEDS. 30 TO 2200 RPM, THREAD DIAL. YES, TAPER ATTACHMENT. YES, STEADY REST. 6", MOTOR. 7.5 HORSEPOWER.
20" x 60" Ganesh #GTW-2060, geared head engine lathe, 10 HP, 10-1550 RPM, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Ganesh
Model: GTW-2060
20" X 60" Engie Lathe with 10 HP Heavy Duty Spindle Motor, 12 Speed Geared Head, Chuck Guard with Micro-Switch to Control Spindle, Inch / Metric Diametral & Modular Threading Capabilities w/o Changing Gears, Automatic Way Lubrications with Filtered Pressure Lubrication System and Flood Coolant System. ...more
Get email updates for newly added Engine Lathes
Engine Lathes (also known as manual lathes or conventional lathes) are versatile machines used for turning, cutting, and shaping metal or other materials. Commonly found in metalworking, automotive, and manufacturing industries, they are ideal for producing cylindrical parts like shafts and bushings. Engine lathes are essential for precise machining and prototyping in workshops and factories.
20" x 60" Lodge & Shipley, engine lathe, 16" swing over cross slide, taper attach, tool holder, 3 HP, #10521
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Lodge & Shipley
SERIAL. 34593, MAXIMUM SWING OVER WAYS. 23", SWING OVER CROSS SLIDE. 16", DISTANCE BETWEEN CENTERS. 60", SPINDLE SPEEDS. (24) 9 TO 500 RPM, FEEDS. (60).005 TO.025 IPM, THREADING. (60) 1 TO 64 TPI, DIAMETER OF HOLE IN SPINDLE. 2-1/2", CROSS TRAVEL OF CROSS SLIDE. 16", TAPER ATTACHMENT. YES, TOOL HOLDER. YES, MAIN ...more
20" x 60" Monarch #62/2013, engine lathe, 4-jaw 15" chuck, chip pan, 10 HP, #73843
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Monarch
Model: 20 X 060 MDL 62/2013
SERIAL. 43445 RMODEL. 62/2013SWING OVER WAYS. 20"SWING OVER CARRIAGE. 12"DISTANCE BETWEEN CENTERS. 60"SPINDLE SPEEDS. 14 TO 1750 RPMSPINDLE HOLE. 2"THREADS. 2 TO 120 TPIFEEDS.0011 TO.06834 JAW CHUCK. 15"HARD WAYS. YESTHREAD DIAL. YESMICRO CARRIAGE STOPS. YESFORWARD & REVERSING. YESCHIP PAN. YESMOTOR. 10 HORSEPOWER.
20" x 60" Mori Seiki #MH-1500, engine lathe, 11" swing over cross slide, 3-jaw 12" chuck, 2" spindle bore, 10 HP
Machinery Network Inc | Encino, CA
Category: Engine Lathes
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Mori Seiki
Model: MH-1500
MORI SEIKI MR-1500, Swing. 20.5", Centers. 60", Swing Over Cross Slide. 11.75", Spindle Bore. 2.05", Power. 10 hp, Spindle Speed Range. 28 - 1350 RPM, Spindle Nose. D1-6, Spindle Taper with Sleeve. #5 MT, Number of Longitudinal and Cross Feed Rates. 40, Range of Longitudinal Feeds.0014" -.0196", Range of Cross ...more
20" x 60" Mori Seiki #MR-1500G, toolroom lathe, 4-jaw 18" chuck, steady & follow rest
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: Engine Lathes
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Mori Seiki
Model: MR-1500G
20" X 60" MORI SEIKI MR-1500G TOOLROOM ENGINE LATHE, 18" 4-JAW CHUCK, Swing over bed. 20", Swing over cross slide. 11", Swing in gap. 26", C to C. 59", Spindle nose. D6, Spindle bore 2", Spindle motor 10hp 3 phase, Spindle speed range. 28 - 1350rpm, Tailstock #5 Morse taper Steady & follower rest, Carriage stop ...more
20" x 60" Schaerer #20X60, German lathe, 3-jaw chuck, 4 way tool post, inch/metric, coolant system
Cleveland Machinery Sales Inc | Cleveland, OH
Category: Engine Lathes
Seller: Cleveland Machinery Sales Inc
Location: Cleveland, OH
Mfr: Schaerer
Model: 20X60
SCHAERER 20X60, 20" Swing x 60" Centers, 31.5 to 1400 RPM, D1-6 Spindle Mount, 1.5" Spindle Bore, Tailstock with Live Center, IN/MM Threading, Inch Threading 1/2 to 56 TPI, Metric Threading 0.5 to 56 MM, Longitudinal Feeds.0023 to.2571, Cross Feeds.0020 to.2240, 4 Way Toolpost, 3 Jaw Chuck, Coolant system, Cleaned and ...more
20" x 60" Summit #20-4X60, Engine Lathe, 12" 3-jaw chuck, 6 pos. bed turret, tailstock, steady rest
Smith Machinery Co | Ames, IA
Category: Engine Lathes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Summit
Model: 20-4X60
Swing Over Bed 20.125 inches Swing Over Cross Slide 11.875 inches Swing Over Gap 27.625 inches Gap Length 15 inches Hole Through Spindle 4.125 inches Threads Inch.125 60 (64) Threads Metric.5 120 mm ( 64 ) Diameter of 3-Jaw Chuck 12 inches Longitudinal Feeds Range.00145.44474 (124) Cross Feeds Range.0007.22237 (124) ...more
20" x 60" Voest #DA250/1.5, engine lathe, 13-1/2" swing over cross slide, 3-jaw 12" chuck, 5 HP, 1979, #74251
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Voest
Model: DA250/1.5
Year: 1979
SERIAL. 1-0004/691, MODEL. DA250/1.5, YEAR NEW. 1979, SWING OVER WAYS. 20", SWING OVER CROSS SLIDE. 13-1/2", DISTANCE BETWEEN CENTERS. 60", SPINDLE SPEEDS. 33 TO 1500 RPM, LONGITUDINAL FEEDS. 0.0028 TO 0.0 212 IPR, THREADS. 1/2 TO 92 TPI, METRIC THREADS. 0.5 to 28 MMPR, DIAMETER OF SPINDLE HOLE. 2-3/8", 3 JAW CHUCK. ...more
20" x 60" Webb Whacheon, 3" bore, 28-1350 RPM, tool holder, Steady Rest, 6-Jaw chuck, Trav-A-Dial on carriage, coolant, worklight, #A6831
Sterling Machinery Exchange | South El Monte, CA
Category: Engine Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Webb
Model: A6831
Swing Over Bed 20" Distance Between Centers 60" Speed 28-1350 RPM Swing 20" Hole Taper Spindle 3-1/8" Horsepower 7.5 s 2 Steady Rest Coolant System Micro Bed Stop Foot Brake 6 Jaw Chuck Trav - A - Dial Hole Size Thru Spindle 3-1/8".
20" x 62" HMT #A24UP/1500, engine lathe,,AcuRite 2-Axis digital read out, inch/metric, 6-jaw 12" chuck, #73210
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Hmt
Model: A24UP/1500
SERIAL. 2526, MODEL. A24UP/1500, SWING OVER WAYS. 20", SWING OVER CROSS SLIDE. 12-1/2", DISTANCE BETWEEN CENTERS. 62", SPINDLE SPEEDS. 45 TO 500 RPM, FEEDS.0009 TO.0320 IPR, THREADS (INCH). 1 TO 56 TPI, THREADS (METRIC).05 TO 36 MM PITCH, DIAMETER OF SPINDLE HOLE. 2-1/2", CHUCK. 12" 6-JAW, SPINDLE FORWARD AND REVERSE. ...more
21" x 59" Okuma #LS, engine lathe, 10.2 HP, 220/440 V., 3-phase
Lenmark Industries | Langley, BC
Category: Engine Lathes
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Okuma
Model: LS
SKU: 117831, Model: LS, Condition: Used, S/N: 4102-9313, Horsepower: 10.2 hp, Distance Between Centres: 59 ", Swing Over Ways: 21 ", Electrical :, Voltage: 220/440 volts, Phase: 3-phase, Additional :, Speed: 38 - 2000 rpm.
JUST ADDED!
21" x 59" Okuma #LS, engine lathe, 12" 3-jaw chuck, 2" bore, 10 HP
PM Machines | Santa Ana, CA
Category: Engine Lathes
Seller: PM Machines
Location: Santa Ana, CA
Mfr: Okuma
Model: LS
OKUMA LS, Swing. 21", Centers. 57", Spindle Bore. 2", Power. 10 hp, RPM. 35 RPM, Swing Over Cross Slide. 13.7".
21" x 60" Clausing #Colchester-21, lathe, 14.5" swing over cross slide, 3-jaw 15" chuck, 8" compound rest, S45118
Perfection Global | Elk Grove Village, IL
Category: Engine Lathes
Seller: Perfection Global
Location: Summit-Argo, IL
Mfr: Clausing
Model: COLCHESTER-21
Swing Over Bed: 21"Swing Over Gap Removed: 28"Swing Over Cross Slide: 14.5"Bar Capacity Thru Spindle: 3.5"Distance Between Centers: 60"Chuck: 15" 3-JawSpindle Nose: 11" D-1 CamlockSpindle Center: 5 MTSpeeds: (16) 18 - 1400 RPMThreads: (38) 2 - 72Leadscrew Diameter: 1.5" - 4 ACMEFeed Rod Diameter: 1-1/8"Cross Slide ...more
21" x 60" Summit #21, engine lathe, 13" swing over cross slide, 4-jaw 18" chuck, 5 HP, Steady Rest, #65352
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Summit
Model: 21
Year: 1973
SERIAL. R050370, MODEL. 21, SWING OVER WAYS. 21", SWING OVER CROSS SLIDE. 13", SWING IN GAP. 28", LENGTH OF GAP. 16", DISTANCE BETWEEN CENTERS. 60", SPINDLE SPEEDS. 15 TO 1600 RPM, SPINDLE HOLE. 3", ENGLISH THREADS. 1/2 TO 56 TPI, METRIC THREADS. 1/2 TO 28, 4 JAW CHUCK. 18", STEADY REST. 9-1/2", TAPER ATTACHMENT. YES ...more
21" x 60" Webb #21GX60, gap bed engine lathe, 3 & 4-jaw chuck, 5 HP, foot brake, coolant
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Webb
Model: 21GX60
SERIAL. 32001, MODEL. 21GX60, SWING OVER BED. 21", SWING OVER CROSS SLIDE. 142", SWING IN GAP. 28", DISANCE BETWEEN CENTER S. 60", SPINDLE SPEEDS. 32 TO 1800 RPM, CHUCKS 3 & 4 JAWS. 10" & 12", FEEDS. 0011 TO.02 IPR, THREADS ENGLISH. 4 TP 80, THREAD DIAL. YES, TRAVEL DIAL. YES, STEADY REST. 5-1/2", COOLANT. ...more
