251 - 286 of 286 listings
JUST ADDED!
Omax #Optimax-80X, CNC Waterjet, 160" X, 80" Y, 12" Z, 15' x 7.2' table, 50 HP Enduromax 530 pump, 60,000 psi, Versajet 5-axis cutting head, Omax control, 2022
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: OPTIMAX 80X
Year: 2022
Used Omax Optimax 80X (2022) Waterjet for Sale. This machine runs an Omax control with an Enduromax 530 direct drive pump rated at 50 HP and a maximum cutting pressure of 60,000 PSI, with flow listed at 120 GPM. Travels are 160″ in X, 80″ in Y and 12″ in Z, with accuracy and repeatability both at ...more
Omax #Optimax-60X, 5-Axis CNC Waterjet, 5.1' x 13' table, 40 HP, 60,000 psi, 350 IPM traverse, 600 lb. abrasive hopper, Omax PC control, 460 Volts, 2023
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: OPTIMAX-60X
Year: 2023
Used Omax Optimax 60X (2023) Waterjet for Sale. This machine has a 5.1′ x 13′ table, Omax PC based control, and a 40 HP pump rated to 60,000 PSI maximum cutting pressure. Traverse speed is 350 IPM with 12″ of Z-axis travel. Power requirement is 460/3/60, and the footprint with pump and controller is ...more
JUST ADDED!
Omax #Optimax-80X, CNC waterjet, 181" x86" table, 160" X, 80" Y, 12" Z, 60000 psi, 50 HP, 5-axis cutting head, 2022
Machinery Resources Intl | Simi Valley, CA
Category: Waterjet Cutters
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Omax
Model: OPTIMAX-80X
Year: 2022
OMAX OPTIMAX 80X PRECISION WATERJET MACHINING CENTER, NEW: 2022, TABLE SIZE: 181" x 86", TRAVELS:, - X-AXIS: 160", - Y-AXIS: 80", - Z-AXIS: 12", PUMP INFO:, - MODEL: ENDUROMAX 530, - TYPE: DIRECT DRIVE, - POWER: 50 HP, - MAX. JET POWER: 42.5 HP, - OUPUT PRESSURE: 60,000 PSI, - ORIFICE: 0.016", - FLOW RATE: 120 GPM, - ...more
Omax #P2040V, waterjet pump, 20 HP, 40,000 PSI, .4-.9 GPM
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: P2040V
Used Omax P2040V Waterjet for Sale. This unit is driven by a 20 HP pump with a maximum cutting pressure of 40,000 PSI and flow rates of.4 –.9 gpm. It is a control console, including a keypad with display and an on/off with emergency switches, a variable speed drive, a work bench top, and a large assortment of ...more
Omax, lot of waterjet parts
Liberty Machinery Co | Lincolnshire, IL
Category: Waterjet Cutters
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Omax
Lot of OMAX Waterjet Parts, Pictures shown are just a sample of what's available. Call 847.276.2761 for Google drive link with all images., PART NUMBER | | QUANTITY AVAILABLE, 200020 | BALLSCREW SUPPORT, 200020 OMAX WBK15-01A NSK | 2 Available, 201639 | CABLE ASSEMBLY, 201639 OMAX DIN43650 USED F/ PRESSURE ...more
Get email updates for newly added Waterjet Cutters
Waterjet Cutters (also known as water jet cutting machines) use high-pressure streams of water, often mixed with abrasives, to cut through materials like metal, stone, and glass. Commonly used in industries such as aerospace, automotive, and manufacturing, waterjet cutters provide precise, clean cuts without generating heat. They are ideal for materials that are sensitive to high temperatures or require intricate cutting.
Omax, Laminar filter, CLS, gravitational, sediment pump, sediment rake, splash diverter
Liberty Machinery Co | Lincolnshire, IL
Category: Waterjet Cutters
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Omax
"This settling tank efficiently cleans overflow water from the Catcher Tank for required recycling through a Closed Loop System (CLS) or for environmental disposal. When water enters the OMAX Laminar Filter, an ideal gravitational filtering process begins in the unit. The accessory contains angled plates that organize ...more
Omax, bulk abrasive delivery system, 600 lb. hopper capacity, 90-125 psi, 10 hr cutting time
Liberty Machinery Co | Lincolnshire, IL
Category: Waterjet Cutters
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Omax
"The OMAX Bulk Abrasive Delivery System improves production times by automating garnet delivery to the nozzle. Available in multiple sizes, the Bulk Abrasive Delivery System uses pneumatic pressure to automatically transport garnet from an external bulk abrasive hopper to the cutting head hopper. The Bulk Abrasive ...more
JUST ADDED!
Park Industries #Javelin, sawjet, 144" x 88" slab size, 5-axis, 27 HP arbor, 0-47° blade miter, 0-58° waterjet miter, two tables, Dynamax 350 pump
Southern Fabricating Mchy Sales | Lithia, FL
Category: Waterjet Cutters
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Park Industries
Model: JAVELIN
144” X 88” Sawjet with Two Tables, 5 - Axis Cutting, Javelin Saw Blade, Automatic Blade & Nozzle System and Dynamax 350 Intensifier Pump., Arbor Motor: 27 HP, Mitering: 0 - 47° Blade, 0 - 58° Waterjet, Max. Slab Size: 144” X 88”, Cutting Modes: Full Auto (CNC), INCLUDES: Two Tables ...more
JUST ADDED!
Polaris #P1-126S, waterjet cutters, single head, hydraulic intensifier pump, 2018
Silverlight CNC | Barrington, IL
Category: Waterjet Cutters
Seller: Silverlight CNC
Location: Barrington, IL
Mfr: Polaris
Model: P1-126S
Year: 2018
Single Head Waterjet P1-126SGantry w/ attachedHydraulic Intensifier Pump.
Polaris #P2-612S, Waterjet Cutting System, 72" X 144", 60,000 PSI, 30 HP, Mk4 Waterjet Control, 2020
Southern Fabricating Mchy Sales | Lithia, FL
Category: Waterjet Cutters
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Polaris
Model: P2-612S
Year: 2020
6’ X 12’ Waterjet Cutting System with Polaris Based Controller, Rigid Gantry Design, Hydraulic Intensifier Pumps, Remote Operator Pendant, Abrasive Metering System and Flow Sensor., X & Y Cutting Area: 72” X 144”, Pump Pressure: 60,000 PSI, Motor Power: 30HP, Z - Axis Travel: 6” ...more
Romeo Engineering #SilverSeries Waterjet, 6' x 12' Table, 60000 PSI, 2005
Revelation Machinery | Chicago, IL
Category: Waterjet Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Romeo
Model: SILVERSERIES
Year: 2005
Make: Romeo Engineering, Model: Silver Series, Year: 2005, Machine Location: Michigan, Romeo Engineering Silver Series 2005, 72 X 144” Cutting Envelope, 78” x 155” Sheet Capacity, (2) Head Capability, Abrasive Hopper, High Load Capacity Table, Ball Screw Machine.005”, 7” Vertical ...more
Semyx #Optima-420, 6' X 12' Waterjet, 60k PSI, 60 HP, 78" x 160" work area, Pump, IDE Cutting Head, 2015
Revelation Machinery | Chicago, IL
Category: Waterjet Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Semyx
Model: OPTIMA-420
Year: 2015
Make: Semyx, Model: Optima 420, Year: 2015, Machine Location: Upon Request, Cutting Travels: 78″ x 160″, Z-Axis Travel: 7″, Max Speed: 785 ipm, Pump PSI: 60,000, Power: 60 hp, 3 x 380 Volt (+100%-5%) +N 50-60Hz, Power: 40 Kw, Dimensions: 5530 x 2815 x 1900 mm, Weight: 2,670 Kg, KMT SL-V-60 Plus Pump ...more
Swift #Jet-Pro-5x10, CNC waterjet, 13' 8" x 7' 6" table, Hybrid servo motors, 2023
Blumberg Machinery Co | Bannockburn, IL
Category: Waterjet Cutters
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Swift
Model: JET-PRO-5X10
Year: 2023
5" X 10" SWIFT-JET PRO 5X10 CNC WATER JET, New 2023, Only 200 Hours, Table Size 13"8" x 7"6", Table Weight 3,758 Lbs., Operating Weight 12,600 Lbs., (Table & Water), Water Volumn 1021 US Gallons, Cutting Envelope 10" x 5", z - Axis 43", Gantry Clearance 9"8", Max. Material Thickness, Water Only 4", Abrasive 2" ...more
Swift-Jet #Swift-Jet-Pro-5x10, CNC waterjet, 5' x 10' table, only 200 hours, 2023
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Swift-Jet
Model: SWIFT-JET-PRO-5X10
Year: 2023
5' X 10' TABLE.
Techni #I510, Waterjet, 5' x 10' table, 50 HP, AT 2010 CNC Control, 2007, G2 510
Revelation Machinery | Chicago, IL
Category: Waterjet Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Techni
Model: I510
Year: 2007
Make: Techni, Model: G2 510, Year: 2007, Machine Location: Upon Request, Table Width: 5.1′, Table Length: 10.3′, Control: AT 2010 CNC, Pump: 50 HP, Max Cutting Pressure: 60,000 PSI, Max Cutting Speed: 700 IPM, Max Material Thickness: 8″, Power Requirement: 380-460/3/60, Machine Weight: 6,500 Lbs ...more
Techni Waterjet #i713-G2, Waterjet Cutter
Machine Tool Technologies | Milwaukee, WI
Category: Waterjet Cutters
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Techni
Model: I713-G2
Techni #ILS-510, CNC waterjet cutting system, 5' x 10' table, 30 HP pump, 60,000 PSI, Techni Control, 2011
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Techni
Model: ILS 510
Year: 2011
Used Techni ILS 510 (2011) Waterjet for Sale. This machine has a 5′ x 10′ table with an open bed design and runs on a Techni control. Cutting is supported by a 30 HP Accustream intensifier pump with a maximum cutting pressure of 60,000 PSI. It is also a closed loop system including a chiller and an ...more
Techni Waterjet #Intec-G2 ATP, Abrasive Hopper & Waste Removal System + 1 Metric Ton GMA Garnet, Unused
Insulating Services Inc | Charlotte, NC
Category: Waterjet Cutters
Seller: Insulating Services Inc
Location: Charlotte, NC
Mfr: Techni
Model: INTEC-G2
Unused Techni Waterjet Intec-G2 ATP Abrasive Hopper & Waste Removal System + 1 Metric Ton GMA Garnet, For sale: Two brand-new, unused components from a Techni Waterjet Intec-G2 510 system (now Biesse), plus a full pallet of premium garnet abrasive. These parts were not necessary for our cutting needs and are ...more
Techni #TJ1500X2, waterjet cutting system, 4' x 8', operators pendant control, 50 HP, 2-Axis, 2010
Southern Fabricating Mchy Sales | Lithia, FL
Category: Waterjet Cutters
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Techni
Model: TJ1500X2
Year: 2010
4’ X 8’ Waterjet Cutting System with Operators Pendant Control, Garnet Hopper and KMT 50 HP High-Pressure Pump., Table Capacity: 4’ X 8’, KMT Pump: 50 HP, Max Air Speed: 1000 IPM, Max Material Thickness: 6”, Tilt / Rotate Bevel Cutting Head: 2 - Axis, INCLUDES: Operators Pendant Control ...more
Techni #TJ300-X2, waterjet, 5' 3" x 10' 6" table, 5' x 10' capacity, 66000 psi, 2011
Revelation Machinery | Chicago, IL
Category: Waterjet Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Techni
Model: TJ300-X2
Year: 2011
Make: Techni, Model: TJ3000, Year: 2011, Machine Location: Upon Request, Table Size: 5’3″ x 10’6″, Accuracy of Motion: +-.001, Max Bevel Angle: 60 Degrees, Pump PSI: 66,000, Quantum ESP 66 NXT 66,000 PSI Intensifier Pump, 5 Axis Waterjet Head, Techni Controller, Filtration System, Garnet Feeder ...more
Techni #TJ4000, CNC waterjet cutting system, 6.3' x 12.8' table, 50 HP pump, 60,000 PSI, rebuilt pump housing, 2005
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Techni
Model: TJ4000
Year: 2005
Used Techni TJ4000 (2005) Waterjet for Sale. This abrasive waterjet has a 6.3′ x 12.8′ table and is driven by a 50 HP KMT SL-V 50 Plus intensifier pump rated to a maximum cutting pressure of 60,000 PSI. Power requirement is 240/2/60, with the KMT intensifier running on 575/3/60 at 52 Amps. Equipment ...more
Techni #Techjet-4000, waterjet cutter, 76" x154" table, 60000 psi, good working condition, 2003
Bud's Machine Tools | Murray, UT
Category: Waterjet Cutters
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Techni
Model: TECHJET-4000
Year: 2003
Overview, Type:Waterjet CuttersManufacturer:TECHNI WATERJETModel:TECHJET 4000Year:2003Status:For Sale, IN GOOD WORKING CONDITION!, Was used to cut through stone, steel and plastics., ImperialMetricPump Output 60,000 PSI 4,136.8 bar X 72" 1,828.8 mm Y 144" 3,657.6 mm Table Size-W 154" 3,911.6 mm Table ...more
Techni #i613-62-08, CNC Waterjet Cutting System, 6' x 12', Techni Control, 2021
Southern Fabricating Mchy Sales | Lithia, FL
Category: Waterjet Cutters
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Techni
Model: I613-62-08
Year: 2021
6’ X 12’ Waterjet with Techni Control, Quantum NXT Pump and 5 - Axis Cutting Head, Cutting Area: 66.9” X 145.7”, Bevel Cutting Area: 66.9” X 145.7”, Max Air Speed: 700”/Min, Max Cutting Speed: 700”/Min, Max Material Thickness: 8”, Pump Hours: 1,909, Machine Size: ...more
Technicut Waterjet table & Flow systems pump complete
C3 Surplus LLC | Miami, FL
Category: Waterjet Cutters
Seller: C3 Surplus LLC
Location: Miami, FL
Mfr: Technicut
TECHNICUT brand water jet table and FLOW systems pump complete, has been powered up and used, has all computer system. P8785,., Location: Dubuque, IA.
Vicon #Hypertherm-HyPrecision-50, CNC Abrasive Waterjet Cutting System, 5' x 10' cutting table, 4" cutting capacity, 50 HP, 60,000 psi, dual rack & pinion
Heavy Wall Consulting | Long Beach, CA
Category: Waterjet Cutters
Seller: Heavy Wall Consulting
Location: Center Moriches, NY
Mfr: Vicon
Model: HYPERTHERM-HYPRECISION-50
Vicon CNC Abrasive Waterjet Cutting System – Hypertherm HyPrecision 50 Pump – Heavy Duty Industrial – Used, Used Vicon heavy-duty CNC abrasive waterjet cutting system paired with a Hypertherm HyPrecision 50 high-pressure pump., Tested and confirmed in good working condition., Pump: Hypertherm ...more
Wardjet #E-2040, waterjet, 6.5' x 13.1' table, 50 HP, 60,000 PSI., Wardjet XL control, 2018
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Wardjet
Model: E-2040
Year: 2018
Used Wardjet E-2040 (2018) Waterjet for Sale. This abrasive waterjet runs a 6.5′ by 13.1′ table with a Wardjet XL control and ballscrews in all axes. Cutting is handled by a 50 HP Hypertherm P50s intensifier pump rated to a maximum cutting pressure of 60,000 PSI. The machine is a bulk dump hopper, abrasive ...more
Wardjet #RX-3013, 60000 psi waterjet, 100 HP, 13' x30'table, 4 cutting heads, 2009
Asset Exchange Corporation | Elk Grove Village, IL
Category: Waterjet Cutters
Seller: Asset Exchange Corporation
Location: Elk Grove Village, IL
Mfr: Wardjet
Model: RX-3013
Year: 2009
Overview, Type: Waterjet Cutters Manufacturer: RX-3013 Model: RX-3013 Year: 2009 Stock #: 91395 Status: For Sale Country: United States, ImperialMetricsize 30' x 13' 30' x 13' Pump Output 60,000 PSI 4,136.8 bar X 30' 9,144 mm Y 13' 3,962.4 mm Table Size-W 13' 3,962.4 mm Table Size-L 30' ...more
Wardjet #RX-3013, 4-head, waterjet cutting system, 100 HP, 60000 psi, 30' x 13' area, 2009
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Wardjet
Model: RX-3013
Year: 2009
2009 Wardjet RX-3013 4-Head Waterjet Cutting System, Wardjet RX-3013 CNC Waterjet Cutting System, New: 2009, Cutting Area: 30' x 13', Z-Axis: 12", Pump Motor: 100 HP x2, Pump Pressure: 60,000 PSI, Cutting Heads: 4, 1 30' x 13' Table/ Catch Tank, 4- Water Jet Cutting Heads, 2 Coolant Chillers, Model: ...more
Wardjet #X-1515, CNC Waterjet Cutting System, 5' x 5' table, 50 HP pump, 60,000 PSI, 12" Z, dual programmable Z-axes, 460 V., 2023
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Wardjet
Model: X-1515
Year: 2023
Used Wardjet X-1515 (2023) Waterjet for Sale. This machine s a 50 HP pump with a maximum cutting pressure of 60,000 PSI and a 5′ x 5′ table. Motion is handled by the Wardjet Move Controller, with 12″ of Z-axis travel and dual programmable Z-axes. Equipment includes the SmartRemove abrasive removal ...more
WardJet #Z3043, CNC waterjet cutting system, 10' x14'table, 60000 psi, 100 HP, 2015
Asset Exchange Corporation | Elk Grove Village, IL
Category: Waterjet Cutters
Seller: Asset Exchange Corporation
Location: Elk Grove Village, IL
Mfr: Wardjet
Model: Z3043
Year: 2015
Overview, Type: Waterjet Cutters Manufacturer: Z-3043 10' X 14' WATER JET Model: Z-3043 10' X 14' WATER JET Year: 2015 Stock #: 65634 Status: For Sale, ImperialMetricsize 10' x 14' 10' x 14' Pump Output 60,000 PSI 4,136.8 bar X 168" 4,267.2 mm Y 120" 3,048 mm Table Size-W ...more
Wardjet #ZX-3043-5, Waterjet, 10' x 14' table, 5-Axis, 60000 psi, 100 HP, Air7500 Chiller, 2015, ZX 3043-5
Revelation Machinery | Chicago, IL
Category: Waterjet Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Wardjet
Model: ZX-3043-5
Year: 2015
Make: Wardjet, Model: ZX 3043-5, Year: 2015, Machine Location: Upon Request, Table Size: 10’x14′, Axis: 5, Pump: Hyprecision100D, PSI: 60,000, HP: 100, X Axis Travel: 168″, Y Axis Travel: 120″, Air7500 Chiller, Abrasive Removal System, Water Recycling System, 2 Safe Walls, 1000lb Bulk Feed ...more
Waterjet Corporation #Suprema, 105" X 164" Waterjet Cutting System, 50 HP, CNC Control
Southern Fabricating Mchy Sales | Lithia, FL
Category: Waterjet Cutters
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Waterjet Corporation
Model: SUPREMA
105” X 164” Waterjet Cutting System with CNC Control, JMT Streamline Pump, 500 Lbs Hopper, 5 - Axis JMT Head and Display Bar Showing Position, Time, Offset, Feedrate and Override Data., Table: 105” X 164”, Pump Horsepower: 50HP, PSI: 60K, INCLUDES: CNC Control, JMT Streamline Pump, 500 Lbs ...more
Waterjet Corporation #Suprema-DX.612, CNC Water Jet Cutting System, KMT Streamline SL-V 100 Plus pump, 2016
Meadoworks LLC | Schaumburg, IL
Category: Waterjet Cutters
Seller: Meadoworks LLC
Location: Chesterfield, MI
Mfr: Waterjet Corporation
Model: SUPREMA DX.612
Year: 2016
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located..
Yaskawa Motoman #HP20D, robotic waterjet cutting system, 7.1' x 12.1' table, 50 HP pump, DX100 Control, 2015
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Yaskawa Motoman
Model: HP20D
Year: 2015
Used Yaskawa/Motoman HP20D (2015) Waterjet for Sale. This robotic waterjet cell runs on a DX100 control and carries a 7.1′ by 12.1′ table with a 480V power requirement. It is (2) Yaskawa/Motoman HP20D robots, a 50 HP KMT dual intensifier pump, a dual blower vacuum pump, high pressure coils and shock ...more
Zonato #Acqua-5, 5-Axis CNC Waterjet Cutting System, 78" x 138" cutting area, 55,000 psi, CAD-CAM software, 400 Volt, 2025
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: Waterjet Cutters
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Zonato
Model: ACQUA 5
Year: 2024
ZONATO ACQUA 5 CNC 5-AXIS WATERJET CUTTING SYSTEM, NEW 2024, KMT INTENSIFIER PUMP, ONE YEARS USE, ZONATO ACQUA 5 CNC Waterjet Cutting System, The ACQUA 5 Waterjet is used for cutting using a high-pressure pump that emits a jet of water mixed with abrasive that can pierce and cut with extreme precision thicknesses of ...more
JUST ADDED!
Swift-cut #PRO-cut, Waterjet, 4' x8', 2022
Revelation Machinery | Chicago, IL
Category: Waterjet Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Model: PRO-CUT
Year: 2022
Make: Swift-cut, Model: Pro-cut, Year: 2022, Machine Location: Upon Request, Manufacturer: Swift-Cut, Model: PRO-Jet, Year: 2022, Table Size: 4′ x 8′, Voltage: 220V, Weight: 3,000 lbs, Condition & Usage, Condition: Excellent, Ownership: One owner, In Operation: No, Primary Use: Cutting Lexan and metals ...more
