Waterjet Cutters in Florida

5’ X 10" Waterjet with Bystronic CNC Control, 50 HP pump (Replaced In 2020) and Maximum Cutting Pressure 60,000 PSI, Dual Cutting Heads, Auto Precision Cutting and Abrasive Hopper, Cutting Envelope: 5' x 10', Pump Motor: 50 HP (New In 2020), Max. Cutting Pressure: 60,000 PSI, INCLUDES: Bystronic CNC ...more

8’ X 12’ Waterjet Cutting System with Calypso Controls, 60,000 PSI Intensifier Pump, 60 HP and 600 Lbs Abrasive Hopper., X - Axis Travel: 145", Y - Axis Travel: 97", Z - Axis Travel: 6", Z - Axis Maximum Clearance: 10", Table Size: 148" X 90", Pump Motor: 60 HP, Pump Pressure: ...more

13' X 22' 5 Axis Twin Table Waterjet System with Portable Control Unit with Remote Commands up to 6 Axes, Power 60 (45) HP (kW) and Pressurized Abrasive Conveying System, Voltage (Three-Phase): 400 ± 5% Volt 50 - 60 Hz, Max Water Pressure: 413 - 7 MPA (60.000 PSI), Max Flow Rate: 5 (1.32) Liters/Minute ...more

Rebuilt 6’ x 12’ CNC Abrasive Waterjet Cutting System with Flowmaster PC Based Controller, Dynamic Cutting Head, 50HP, 60K PSI Hyperjet Intensifier Pump and Abrasive Hopper. Rebuild includes: New X-Axis Ball Screw, PMAC Boards, Contacts, Solenoids, Fresh Pump Rebuild, Repaired and Refinished Cutting ...more

4’ X 8’ X 8" Waterjet Cutting System with Flow Master Control, 30 HP 60KPSI Pump Motor, Dynamic Cutting Head, Bart Garnet Removal System and Hopper., X - Axis Travels: 96", Y - Axis Travels: 48", Z - Axis Travels: 8", Maximum Rapids: 500"/Min, Pump HP: 30HP, Output: 60,000 PSI ...more

4’ X 8’ Waterjet Cutting System with Flowmaster Controls, 600 Lbs Abrasive Bulk Tank with Low/Out Sensor, Waterveyour Garnet Removal System, FlowCut Interface w/ Smartstream Technology, FlowNEST w/ Full Geometric Nesting, Flowpath CAD/CAM System, Hardened Ball Screw Linear Motion System, Easy to Load ...more

6’ X 12’ Waterjet Cutting System with Flowmaster Controls, 600Lbs Abrasive Bulk Tank with Low/Out Sensor, FLOWcut Machine Interface with SmartStream Technology, FlowNEST Full Geometric Nesting, Flowpath CAD/CAM System, Automatic Tool Path Generation, Dynamic Cutting Head with Taper Compensation, Easy to ...more

6’ X 12’ Waterjet Cutting System with Flowmaster Controls, 600 Lbs Abrasive Bulk Tank with Low/Out Sensor, Waterveyour Garnet Removal System, FlowCUT Machine Interface with Smartstream Technology, FlowNEST, Flowpath CAD/CAM System Easy to Load Catcher Tank w/ 3 Open Sides, Ethernet Network and USB Drive ...more

6’ X 13’ Waterjet Cutting System with Flow Expert Control, 60,000 PSI Intensifier Pump, 600 Lbs Abrasive Hopper and Paser 4 Cutting Head., Table Width: 6’, Table Length: 13’, Max. Cutting Pressure: 60,000 PSI, Pump: 30 HP, Rapid Traverse: 400 IPM, INCLUDES: Flow Expert Control, 60,000 PSI ...more

8’ X 15’ CNC Waterjet with Flowmaster Windows Based Control, Integrated Flying Bridge, Dynamic XD Waterjet - Dynamic 3D Waterjet, Hypertension Technology, 50 HP Hyperjet 87,000 PSI Intensifier Pump Flow International 9’ X 16’ Table and 5 - Axis Motion Head., Cutting Area X - Axis Bridge: ...more

8' X 24' Waterjet Cutting System with 100 HP 87,000 PSI Hyper Jet Dual Intensifier, Dynamic XD 5-Axis Head, 300 LB Hopper., 8' X 24' Tank: (Two 8' X 12' Catcher Tanks)Cutting Window: 83" X 298"Hyper Jet Dual Intensifier: 100 HP 87,000 PSI INCLUDES: 100 HP 87,000 PSI Hyper Jet Dual Intensifier ...more

4' X 4' CNC Abrasive Waterjet Cutting System with P.C. Controller, 40,000 PSI, 40H.P Abrasive Hopper 4' X 4' CNC Abrasive Waterjet Cutting System with P.C. Controller, 40,000 PSI, 40H.P Abrasive Hopper., Effective Cutting Area: 4’ X 4’, Largest Workpiece: 48" X 48", Maximum Z-Axis ...more

6’ X 12’ Abrasive Finishing Machine with Mitsubishi M700 CNC Controller, KMT Streamline SL-IV 50 HP Intensifier (Rebuilt May 2023), with Topworks, New Proximity Switches, Pressure Sensors, Garnet Removal System,Taper Control System 5 - Axis Cutting Head, Various Spares and Pallet of Garnet and Abrasive ...more

5’2" X 5’2" CNC Waterjet Cutting System with Mobile Control Station w/ 23" Widescreen Display, 20 HP Motor, Brushless Servo Motors, Stainless Steel Hardened Precisoned Ground Shaft Ways, Real Time Close Loop Feedback with Digital Drives, Bridge Style Y - Axis and Intelli - Trax Drive ...more

6’ 7" X 13’ 10" X 12" CNC Waterjet Cutting System with Omax Based PC Control, 40 HP 50 KPSI Direct Drive Pump, Terrain Follower, Water Level Control, 600 Lbs Bulk Abrasive Hopper and Abrasive Removal System., X / Y Cutting Travel: 13’ 10" X 6’ 7", Z - Axis Travel: ...more

Item Location, 105 Rocky Cliff Ln. Kalispell, MT 59901, Make, Park Industries, Model, Fusion 4045 SL, Serial Number, 219646, Year, 2015, Phase, 3 PHASE, Voltage, 480 VOLT, Inspection Date, September 5th - September 19th, 2024 By appointment only, Final Removal Date, September 19th - September 26th, 2024 By appointment ...more

6’ X 12’ Waterjet with Techni Control, Quantum NXT Pump and 5 - Axis Cutting Head, Cutting Area: 66.9" X 145.7", Bevel Cutting Area: 66.9" X 145.7", Max Air Speed: 700"/Min, Max Cutting Speed: 700"/Min, Max Material Thickness: 8", Pump Hours: 1,909, Machine Size: ...more

TECHNICUT brand water jet table and FLOW systems pump complete, has been powered up and used, has all computer system. P8785, Location: Dubuque, IA.

6’ X 13’ Waterjet Cutting System with CMC Burny Phantom ST CNC Control, Jet Edge 55-50C Intensifier and 3-Axis Abrasive Cutting Head, Table: 6’ X 13’, One Carriage X - Y Cutting Area: 6.6' X 13.1', Drive Mechanism: Ball Screw Driven in All Axes, Linear Positional Accuracy: ± 0.003" ...more

105" X 164" Waterjet Cutting System with CNC Control, JMT Streamline Pump, 500 Lbs Hopper, 5 - Axis JMT Head and Display Bar Showing Position, Time, Offset, Feedrate and Override Data., Table: 105" X 164", Pump Horsepower: 50HP, PSI: 60K, INCLUDES: CNC Control, JMT Streamline Pump, 500 Lbs Hopper ...more