1851 - 1900 of 2862 listings
Komo #VMC-40/144, vertical machining center, 30 automatic tool changer, 144" X, 22.5" Y, 21" Z, 8000 RPM, #40, 10 HP, 24" x144"tbl., 1996
Silverlight CNC | Barrington, IL
Category: Vertical CNC Machining Centers
Seller: Silverlight CNC
Location: Barrington, IL
Mfr: Komo
Model: VMC-40/144
Year: 1996
KOMO VMC-40/144 CNC Vertical Machining Center, 1996 model, in used condition. s 144" x 22.5" x 21" travel, 10 hp, 8,000 RPM, CAT-40 taper, 30 ATC, and a 24" x 144" table. Ideal for precision and efficiency in machining tasks., 1996 KOMO VMC-40/144, X. 144", Y. 22.5", Z. 21", Power. 10 hp, RPM. 8,000 RPM, # ATC. 30 ...more
Clausing Kondia #FV-1, Vertical Milling Machine, 30" X, 15" Y, 16.5" Z, 23" ram travel, 3 HP, 4000 RPM, 3-axis Sony digital read out, 220 Volt, 3PH
Naab Sales Corporation | Blaine, MN
Category: Vertical CNC Machining Centers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Kondia
Model: FV-1
Clausing Kondia Model FV-1 Vertical Milling Machine W/ 3- Axis Sony DRO, Make: Clausing Kondia, Model: FV-1, Serial # AC 166, Size of table 9” x 48”, Longitudinal travel 30”, Saddle travel 15”, Knee travel 16 ½”, Ram travel 23”, Quill travel 5”, Throat distances ...more
JUST ADDED!
Kuraki #MV-40, CNC vertical machining center, 30 automatic tool changer, 40" X, 20" Y, 20" Z, 6000 RPM, 15 HP, #40, 48" x18" table, Fanuc 15-M
Machine Tool Bids | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Kuraki
Model: MV-40
Kuraki MV 40 Vertical Machining Center, Axis Travel, X-Axis 40" (1,020 mm), Y-Axis 20" (510 mm), Z-Axis 20" (510 mm), Table Size 48" x 18", Max Table Load 1,500 - 2,000 lbs, T-Slots 5, T-Slot Width 18 mm, Spindle Taper CAT-40, Spindle Speed 6,000 RPM, Main Motor 15 HP, Tool Capacity 30, Fanuc ...more
Cincinnati Lamb #FTV840-3700, CNC vertical machining center, 50 automatic tool changer, 145" X, 31.5" Y, 32" Z, 10000 RPM, #40, 25 HP, Fanuc 18i-MB, Renishaw RMI-Q probe, chip conveyor, thru spindle coolant, 2004
MachineStation | Lake Elsinore, CA
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Byron, IL
Mfr: Lamb
Model: FTV840-3700
Year: 2004
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 18i-MB CNC Control, 25 HP High Torque ...more
Cincinnati Lamb #FTV840-3700, 145" X, 31.5" Y, 32" Z, 10000 RPM, #40, 25 HP, Fanuc 18i-MB, Renishaw RMI-Q probe, 2004
MachineStation | Lake Elsinore, CA
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Byron, IL
Mfr: Lamb
Model: FTV840-3700
Year: 2004
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 18i-MB CNC Control, 25 HP High Torque ...more
Get email updates for newly added Vertical CNC Machining Centers
Vertical CNC Machining Centers (also known as vertical milling machines) are CNC machines with a vertically oriented spindle, enabling efficient machining of a wide range of parts. Commonly used in industries like aerospace, automotive, and metal fabrication, these centers provide precision and flexibility for milling, drilling, and tapping operations. Vertical CNC machining centers are ideal for both high-volume production and detailed work, supporting high accuracy and ease of setup.
JUST ADDED!
Leadwell V #40IT, vertical machining center, 40" X, 23" Y, 21" Z, 24 automatic tool changer, 12000 RPM, 25 HP, Trunnion Table, Chip Conv., thru spindle coolant, 2011
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Leadwell
Model: 40IT
Year: 2011
Make: Leadwell V, Model: 40it, Year: 2011, Machine Location: Upon Request, Spindle Speed: 12000 RPM, Number of tables / pallets: 1, Table size: 22″ X 13.3″, Weight on table: 440 / 220 LBS., Integrated nc rotary table size: 13.8″ ROUND, Spindle nose to table: 1.9″ – 21″, Main spindle ...more
Leadwell #MCV-760AR, CNC vertical machining center, Fanuc 0MF, 29.9" X, 20" Y, 24" Z, 6000 RPM, 24 automatic tool changer
Machinery Network Inc | Encino, CA
Category: Vertical CNC Machining Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Leadwell
Model: MCV-760AR
LEADWELL MCV-760AR, X Axis Travel. 29.9", Y Axis Travel. 20", Z Axis Travel. 24", Cutting Feed Rate. 16,404 ft/min, Spindle Motor. 15 hp, Spindle Speed. 6,000 RPM, Spindle Taper. MAS-CT 40, Max. Table Load. 1,543 Lbs, Dimensions. 97.6" x 153.3" x 116.1", Weight. 14,550 Lbs, Fanuc OMF Control, 24 Position Double Arm ...more
Leadwell #MCV-1000AP, vertical machining center, 43" X, 24" Y, 20" Z, 25 HP, 44" x20" table, 6000 RPM, Fanuc OM Control, chip auger, rigid tap, 24 automatic tool changer, 1993
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Leadwell
Model: MCV-1000AP
Year: 1993
Make: Leadwell, Model: MCV-1000AP, Year: 1993, Machine Location: Indiana, X-Axis TraveL: 43″, Y-Axis Travel: 24″, Z-Axis Travel: 20″, Table Size: 44″ x 20″, Spindle: 25HP, Voltage Required: 220 3 Phase, Spindle Speed: 6000 RPM, Taper: Cat 40, Approximate Dims: 108” x 115” x ...more
JUST ADDED!
Leadwell #MCV-1300, CNC vertical machining center, 24 automatic tool changer, 51.1" X, 25" Y, 24" Z, 10000 RPM, 34 HP, 56" x24" table, Fanuc 0iMF, 2016
Machinery Values Inc | Harrison, NJ
Category: Vertical CNC Machining Centers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Leadwell
Model: MCV-1300
Year: 2016
LEADWELL VERTICAL MACHINING CENTERMODEL: MCV-1300,… S/N: L2TAD0690,… NEW: 2016 : X-AXIS TRAVEL. 51.1"Y-AXIS TRAVEL. 25"Z-AXIS TRAVEL. 24"SPINDLE NOSE TO TABLE TOP. 5.9" TO 29.9"DISTANCE FROM SPINDLE CENTER TO COLUMN. 25"TABLE SIZE. 56" X 24"MAX TABLE ...more
JUST ADDED!
Leadwell #MCV-1300, CNC vertical machining center, 32 automatic tool changer, 51.1" X, 25" Y, 24" Z, 10000 RPM, 34 HP, 56" x24" table, Fanuc 0iMF, 2018
Machinery Values Inc | Harrison, NJ
Category: Vertical CNC Machining Centers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Leadwell
Model: MCV-1300
Year: 2018
LEADWELL VERTICAL MACHINING CENTERMODEL: MCV-1300,… S/N: L2TAG040T,… NEW: 2018 : X-AXIS TRAVEL. 51.1"Y-AXIS TRAVEL. 25"Z-AXIS TRAVEL. 24"SPINDLE NOSE TO TABLE TOP. 5.9" TO 29.9"DISTANCE FROM SPINDLE CENTER TO COLUMN. 25"TABLE SIZE. 56" X 24"MAX TABLE ...more
JUST ADDED!
Leadwell #MCV-1300, CNC Vertical Machining Center, 55.8" x 23.9" table, 51.8" X, 24.9" Y, 23.9" Z, 34 HP, 10,000 RPM, 32 automatic tool changer, Fanuc 0iMF CNC, 2016
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Leadwell
Model: MCV-1300
Year: 2016
Used ertical Machining Center available. s 51.8" X, 24.9" Y, 23.9" Z travel, 34 hp spindle, 10,000 RPM, 32 ATC, plus FANUC 0iMF control, remote jog handle, and chip conveyor., 2016 LEADWELL MCV-1300, X. 51.8", Y. 24.9", Z. 23.9", Power. 34 hp, RPM. 10,000 RPM, # ATC. 32, Taper. 50, Table-W. 23.9", Table-L. 55.8", # ...more
JUST ADDED!
Leadwell #MCV-1300, CNC Vertical Machining Center, 55.8" x 23.9" table, 51.8" X, 25" Y, 24" Z, 34 HP, 10,000 RPM, 32 automatic tool changer, CAT 50, Fanuc 0iMF CNC, 2018
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Leadwell
Model: MCV-1300
Year: 2018
Vertical Machining Center, used. : X 51.8", Y 25", Z 24", 34 HP, 10,000 RPM, 32 ATC, CAT 50, with FANUC 0iMF CNC, remote jog, box ways, coolant tank, spindle chiller, chip conveyor. 3-axis, rapid traverse 787 IPM., SPINDLE NOSE TO TABLE TOP. 5.9" TO 29.9", DISTANCE FROM SPINDLE CENTER TO COLUMN. 25", MAX TABLE LOAD. ...more
JUST ADDED!
Leadwell #V-40IT, 5-Axis CNC Vertical Machining Center, 40" X, 25" Y, 21" Z, 22" x 13.3" table, 24.8 HP, 12,000 RPM, CT 40, 24 automatic tool changer, 2011
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Leadwell
Model: V-40IT
Year: 2011
Used Vertical Machining Center, 5-axis, 12,000 RPM, 24 ATC, trunnion table. s high pressure coolant, chip conveyor, and cooler. X/Y/Z travel at 40"/25"/21"., Spindle Speed: 12000 RPM, Number of tables / pallets: 1, Table size: 22 X 13.3, Weight on table: 440 / 220 LBS., Integrated nc rotary table size: 13.8 ROUND ...more
Leadwell #V-60I, Vertical Machining Center, 3-Axis, 60" X, 30" Y, 28" Z, 29.5" x 61" Table, 20 HP, 12000 RPM, CAT 40 Taper, 40 automatic tool changer, 2015
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Leadwell
Model: V-60I
Year: 2015
Used Vertical Machining Center offers a 60"x30"x28" work area, 12,000 RPM spindle, and 40 ATC with CAT 40 taper. Includes Fanuc Oi-MB, chip conveyor, rigid tapping, and more. 23,100 lbs., Max. Table Load Capacity 2,640 lbs, Rapid Traverse Rate X, Y & Z 944/944/786 IPM, Auto Tool Change Capacity 40 ATC, Max. Tool ...more
JUST ADDED!
Leadwell #V-60IT, 5-Axis Vertical Machining Center, 50" X, 40" Y, 30.8" Z, 35 HP, 15000 RPM, 40 automatic tool changer, CAT 40, 2018
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Leadwell
Model: V-60IT
Year: 2016
Used Vertical Machining Center s 5-axis capability, 15,000 RPM spindle, and a 40-tool changer. Fanuc 0iMF control, Renishaw NC4., X-Axis Travel: 50", Y-Axis Travel: 40", Z-Axis Travel: 30.8", Number of Axis: 5, Spindle Speed: 15,000 RPM, Spindle Taper: CAT 40 / BT 40 Dual Contact, Spindle Motor: 35 HP / 47 HP Peak ...more
Leadwell #V60i, CNC vertical machining center, 60" X, 30" Y, 29.3" Z, 12000 RPM, 61" x29.5" table, 20 HP, 40 automatic tool changer, rigid tap, thru spindle coolant, Fanuc Oi-MB
Machinery Works Inc | Belgium, WI
Category: Vertical CNC Machining Centers
Seller: Machinery Works Inc
Location: Belgium, WI
Mfr: Leadwell
Model: V60I
Year: 2015
LeBlond Makino #FNC128-A30, CNC vertical machining center, 49" X, 32" Y, 27.5" Z, 30 automatic tool changer, 3500 RPM, 70-7/8" x31-1/2" table, Fanuc cnc, 1984
Source Machinery Sales | Fridley, MN
Category: Vertical CNC Machining Centers
Seller: Source Machinery Sales
Location: Fridley, MN
Mfr: Leblond
Model: FNC128-A30
Year: 1984
LeBLond Makino FNC128-A30 CNC Vertical Machining Center, Fanuc 6MB CNC Control, RS 232 Port, Cat 50 Spindle Taper, 30 Station Automatic Tool Changer, 70-7/8" x 31.5" Table, 49" x 32" x 27.5" Travels, 10 - 3,500 RPM Spindle Speeds, Oilmatic Chiller, Coolant System, 25 HP Motor and Controls, Assorted Manuals, 1984 ...more
JUST ADDED!
LeBlond Makino #RMC-55, Vertical Machining Center, 21.6" X, 12.6" Y, 13.8" Z, CT40, Fanuc OM, 7.5 HP, 1991
MD Equipment Services LLC | Crooked River, OR
Category: Vertical CNC Machining Centers
Seller: MD Equipment Services LLC
Location: Portland, OR
Mfr: Leblond
Model: RMC-55
Year: 1991
CNC Vertical Machining Center, Manufacturer: LeBlond Makino, Model: RMC 55, Serial No.: K1091 & MAM8815, DOM (circa): 1991- 1993, Electrics: 230-460 Volt, 3 Phase, 50-60 Cycle, 30-15 Amps, Main Motor: 7.5 HP, s and :,.3-Axis CNC Controlled VMC,.Fanuc OM Control,.Table Size: 31.5” x ...more
Liechti #GO-Mill-350, 5-Axis cnc vertical machining center, 13.8" blade, 13.8" swing, S6, 20000 RPM, 30 or 60 tool, CAM Liechti Turbosoft Plus Control, 2007
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Liechti
Model: GO-MILL-350
Year: 2007
Liechti goMill 350 5-Axis CNC Vertical Machining Center, (subject to buyer verification):, Blade length max. (incl. fixture) 350 mm (13.8’’), Blade swing dia. max. 350 mm (13.8’’), Spindle (S6) 20000 rpm, 120 Nm, 36 kW, HSK-A63, Pivot Table Double end rotary configuration (1000 rpm turning ...more
Light Machine Corporation #Benchman-XT, CNC Milling Machine, 20" x 7" capacity, 3450 RPM, 230 V, 20-Position Tool Positioner
HGR24 | Euclid, OH
Category: Vertical CNC Machining Centers
Seller: HGR24
Location: Euclid, OH
Mfr: Light Machine Corporation
Model: BENCHMAN XT
Inventory No. 0326-115-0001 Manufacturer Light Machine Corporation Model No. BENCHMAN XT Name CNC Milling Machine Arrival Date 04-01-2026 Dimensions L x W x H (inches) 62 x 40 x 76 Capacity 20" X 7" Electrical 1/50/60/230 Weight (lb.) 1295 Category CNC Condition Used Available Quantity 1 Serial No. 020-55A0-0158 Item ...more
Litz Hitech #CV-1600 CNC vertical machining center, 30 automatic tool changer, 62.9" X, 35.4" Y, 31.4" Z, 10000 RPM, #40, 20 HP, 66.93"x33.46"tbl., Fanuc Series 18i-MB, rigid tap, 2007
MachineStation | Lake Elsinore, CA
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Litz
Model: CV-1600
Year: 2007
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc Series 18i-MB CNC Control, 10,893 Hours ...more
Mitsubishi Litz #DV-1000, CNC vertical machining center, 40.2" X, 22" Y, 23.6" Z, 15000 RPM, #40, 22" x39.3" tbl., Mitsubishi M70, rigid tap, 2015
Generation Machine Tools | Sarasota, FL
Category: Vertical CNC Machining Centers
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Litz
Model: DV-1000
Year: 2015
MITSUBISHI LITZ DV-1000 CNC Vertical Machining Center 2015’ #8159, MITSUBISHI LITZ DV-1000 CNC Vertical Machining Center 2015’ #8159, Reference # 8159, Model # DV-1000, Serial # 61J100263, Year of manufacture- 9/2015’, Table size- 22” x 39.3”, Maximum table weight- 1,650 Lbs., X axis ...more
Litz #Hi-Tech-CV-1000, CNC vertical machining center, Fanuc 0iMF, 40.1" X, 22" Y, 23.6" Z, 8000 RPM, 24 automatic tool changer, 2007
Machinery Network Inc | Encino, CA
Category: Vertical CNC Machining Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Litz
Model: HI-TECH-CV-1000
Year: 2007
2007 LITZ HITECH CV-1000, X Axis Travel. 40.16", Y Axis Travel. 22.05", Z Axis Travel. 23.62", Spindle Motor. 11 hp, Spindle Speed. 8,000 RPM, ATC Capacity. 24, Spindle Taper. 40, Table-W. 22.05", Table-L. 39.37", Max. Table Load. 1,653 Lbs, Fanuc 0i-MF PlusCNC Control, Chip Auger.
Litz #Hi-Tech-CV-1200B, CNC vertical machining center, Fanuc Control, 48" X, 24" Y, 21" Z, 24 automatic tool changer, Cat 50, 2007
Machinery Network Inc | Encino, CA
Category: Vertical CNC Machining Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Litz
Model: HI-TECH-CV-1200B
Year: 2007
2007 Litz Hitech CV-1200 B, X Axis Travel. 48", Y Axis Travel. 24", Z Axis Travel. 21", ATC Capacity. 24, Spindle Taper. CAT50, Fanuc Control.
Litz #Hi-Tech-CV-1600, CNC vertical machining center, Fanuc 18iMB, 62.9" X, 35.4" Y, 31.5" Z, 10000 RPM, 30 automatic tool changer, 2007
Machinery Network Inc | Encino, CA
Category: Vertical CNC Machining Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Litz
Model: HI-TECH-CV-1600
Year: 2007
2007 LITZ HITECH CV-1600, X Axis Travel. 62.99", Y Axis Travel. 35.43", Z Axis Travel. 31.49", Cutting Feed Rate. 314 IPM, Rapid Traverse X. 787 in/min., Rapid Traverse Y. 787 in/sec., Rapid Traverse Z. 590 in/min., Distance From Spindle To Column. 3.93 35.43, Spindle Motor. 20 hp, Spindle Speed. 10,000 RPM, ATC ...more
Litz Hitech #LU-620, 5" axis CNC vertical machining center, 2015
Star Equipment Co., Inc. | Utica, MI
Category: Vertical CNC Machining Centers
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Litz
Model: LU-620
Year: 2015
Litz Hitech LU-620 5 Axis Machining Center for sale. Manufactured in 2015, this vertical machining center is ideal for complex tasks. A great addition to any workshop looking for precision and efficiency. Used condition., 2015 LITZ LU-620.
JUST ADDED!
Litz Hitech Mitsubishi #DM-800G, 31.5" X, 19.7'Y, 21.3" Z, 24 automatic tool changer, 20000 RPM, Graphite machining package, 2015
Liberty Machinery Co | Lincolnshire, IL
Category: Vertical CNC Machining Centers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Litz Hitech Mitsubishi
Model: DM-800G
Year: 2015
Year Built - 2015, Serial No. 61MM00075, Travels:, - X-Axis.31.5", - Y-Axis.19.7", - Z-Axis….21.3", Spindle Speed….20,000, Tool Weight - Maximum….11 Lbs, Cutting feedrate….0.04 – 787 in/min, Table:, - Size….35.8 x 19.6, - Weight Cap….1100 Lbs, - Table to Spindle Nose ...more
LK #VM3, CNC Vmc, CAT-40 spindle, 12000 RPM, 44" x 19.6" table, 39.4" X, 19.6" Y x 24" Z, 24 automatic tool changer, Fanuc 0I-MF+ Control, 2024
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Lk
Model: VM3
Year: 2024
Make: LK Machinery, Model: VM3, Year: 2024, Machine Location: Upon Request, Controller (PLC) – Fanuc 0i-MF PLUS, 15″ Touchable LCD Screen, Convection Heat exchanger in control box, RJ-45 Interface (for computer connection), Automatic power off, Spindle speed: 12000 rpm, #40 DDS Type, Spindle nose : CAT-40 ...more
Machinery Works #VMC10.5, 394" X, 23.6" Y, 19.7" Z, 10/15 kw, BBT-40, 20 automatic tool changer, 3.152" diameter x 11.8" L max, Fanuc 0iMF cnc, 2025
Machinery Works Inc | Belgium, WI
Category: Vertical CNC Machining Centers
Seller: Machinery Works Inc
Location: Belgium, WI
Mfr: Machinery Works
Model: VMC10.5
Year: 2025
Mag Mag #VMC-8030D-3 HT, CNC Vertical Mill, 80" X, 30" Y, 30" Z, 82.5" x 30" Table, 10000 RPM, 22.5-30 HP, 21-24 Tools, 2007
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Mag
Model: VMC-8030D-3 HT
Year: 2007
Make: Mag Fadal, Model: VMC-8030D-3 HT, Year: 2007, X-Axis Travel: 80″, Y-Axis Travel: 30″, Z-Axis Travel: 30″, Table Size: 82.5″ x 30″, Max Table Weight: 3,750 – 4,840 lbs, Spindle Taper: CAT 40, Spindle Speed: 10,000 RPM, Spindle Motor: 22.5 – 30 HP, Tool Capacity: 21 ...more
MAG Mag #VMC6030HT, 60" X, 30" Y, 30" Z, 24 automatic tool changer, 10000 RPM, 2008
Kays Engineering Inc | Marshall, MO
Category: Vertical CNC Machining Centers
Seller: Kays Engineering Inc
Location: Marshall, MO
Mfr: Mag
Model: VMC6030HT
Year: 2008
MAG Fadal VMC 6030 HT, Year = 2008 Serial Number = 012008041586 60 x 30 x 30 24 ATC Tool Changer 10,000 RPM Spindle 240 Volt Currently under power and running.
Mag, Fadal #VMC6030HT, 60" X, 30" Y, 30" Z, 10000 RPM, 24 automatic tool changer, 22.5 HP, 62.5"x30"table, Cat 40, 2008
Liberty Machinery Co | Lincolnshire, IL
Category: Vertical CNC Machining Centers
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Mag
Model: VMC6030HT
Year: 2008
Year Built - 2008, Machine On Time - 1,740 Hours, Machine Run Time - 238 Hours, Table:, - Size.62.5" x 30", - Capacity.4,120 Lbs., - T-Slots.5 x 0.709" x 3.75", Floor to Table Surface.36", Spindle Nose to Table.5.5" - 35.5", Travels:, - X.60", - Y.30", - Z.30", Cutting Feed Rate (X/Y/Z).0 - 400 ipm, Rapid Traverse ...more
Mag-cx3 #500, vmc, 19" x, 15" y, 6.7" z, 24000 rpm, 2 hp, 2024
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Mag-Cx3
Model: 500
Year: 2024
Make: Mag-CX3, Model: 500, Year: 2024, Machine Location: Texas, X-Axis Travels: 19″, Y-Axis Travels: 15″, Z-Axis Travels: 6.7″, Precision: +/- 0.0004″, Max Interpolated Speed: 393.7 IPM, Max Spindle Speed: 24,000 RPM, Power Output: 2.15 HP, Tool Cone Type: ISO 20 – ER20, Pneumatic ...more
Deckel Maho #60P-Hi-Dyn, CNC vertical machining center, 30 automatic tool changer, 23.6" X, 27.5" Y, 23.6" Z, 12000 RPM, 5th Axis
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Maho
Model: 60P-HI-DYN
Year: 2001
Make: Deckel Maho, Model: 60P Hi-Dyn, Year: 2001, Machine Location: Missouri, Measurements:, Width: 248.03″, Depth: 255.91″, Height: 106.30″, Machine Weight: 23,589.4 lbs, Control Unit:, Model: TNC 426, Brand: HEIDENHAIN, Main Drive:, Spindle Speed Range: 12,000 RPM, Tool Taper: SK 40, Number of ...more
JUST ADDED!
Deckel Maho #DMC-100U, 2 machines with Fastems 28 st. pallet pool, 5-Axis vertical machining center, 39.3" X, 39.3" Y, 39.3" Z, 18000 RPM, 240 automatic tool changer, 2005
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Maho
Model: DMC-100U
Year: 2005
Deckel Maho DMC 100-U 2-Machines with Fastems 28 St. Pallet Pool 5-Axis Machining Center (subject to buyer verification):Pallet Size: 32” x 40”X-Axis Travel: 39.37”Y-Axis Travel: 39.37”Z-Axis Travel: 39.37”B-Axis Travel: 180°C-Axis Travel: 360°Spindle Motor: 35 HPSpindle Speed: ...more
Deckel Maho #DMC-1035V, CNC vertical machining center, 20 automatic tool changer, 40.7" X, 22" Y, 20.1" Z, 10000 RPM, #40, 17.4 HP, 22" x47"tbl., 2008
Silverlight CNC | Barrington, IL
Category: Vertical CNC Machining Centers
Seller: Silverlight CNC
Location: Barrington, IL
Mfr: Maho
Model: DMC-1035V
Year: 2008
DECKEL MAHO DMC 1035V CNC Vertical Machining Center, 2008 model, offers a 40.7" X, 22" Y, and 20.1" Z travel with 10,000 RPM, 17.4 hp power, CAT-40 taper, and a 20-tool automatic tool changer. Table dimensions: 22"W x 47"L. Used condition., 2008 DECKEL MAHO DMC 1035V, X. 40.7", Y. 22", Z. 20.1", Power. 17.4 hp, RPM. ...more
Deckel Maho #DMF-260, CNC vertical machining center, 102.4" X, 43.3" Y, 35.4" Z, 8000 RPM, SK40, Heidenhain TNC 640, Nikken CNCB450ZA 4-Axis CNC rotary table, 2011
Machine Tool Bids | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Maho
Model: DMF-260
Year: 2011
MACHINE, X: 102.4", Y: 43.3", z: 35.4", Max Workpiece Diameter: 55.1", Max Workpiece Height: 36.6", Max Workpiece Weight: 8,818.5 lbs, Max workpiece length: 126", Max workpiece width: 43.3, Dimensions: W 17.75' x L 33.55' x H 10.375', Weight: 33,223 lbs.
Deckel Maho #DMU-70-eVo-linear, 5-Axis vertical machining center, 29.5" X, 23.6" Y, 20.5" Z, 18000 RPM, 60 automatic tool changer, 580 psi thru spindle coolant, chip conveyor, Heidenhain iTNC530 Ergoline Control, 2009
Franke CNC, LLC | Germantown, WI
Category: Vertical CNC Machining Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Maho
Model: DMU-70-EVO-LINEAR
Year: 2009
, Heidenhain iTNC 530 ERGOline control with a 19" screen, Electronic hand wheel for control, BLUM laser tool measuring, Rinsing pistol, 580 PSI CTS (Coolant thru the spindle) with paper band micro filter, Chip conveyor, Machine is offered subject to availability, prior sale, and terms & conditions of FRANKE CNC ...more
Deckel Maho #DMU-80, Hi-Dyn 5-Axis Vmc, 31.5" X, 27.6" Y, 23.6" Z, 12000 RPM, MillPlus Control, 30 automatic tool changer, 39" x24" table, Coolant, 2000
Aucto | San Francisco, CA
Category: Vertical CNC Machining Centers
Seller: Aucto
Location: Arnprior, ON
Mfr: Maho
Model: DMU-80
Year: 2000
THE 2000 DECKEL MAHO DMU 80 HI-DYN IS A HIGH-PRECISION 5-AXIS VERTICAL MACHINING CENTER DESIGNED FOR COMPLEX SIMULTANEOUS MILLING OPERATIONS. IT S A WORKING ENVELOPE WITH TRAVELS OF 800 MM IN THE X-AXIS, 700 MM IN THE Y-AXIS, AND 600 MM IN THE Z-AXIS. THE MACHINE IS A 2-AXIS UNIVERSAL MILLING HEAD AND A B-AXIS ...more
JUST ADDED!
Deckel Maho #DMU50V, CNC vertical machining center, 60 automatic tool changer, 21.6" X, 17.7" Y, 15.7" Z, 15000 RPM, #40, 5-Axis, Heidenhain Control, 2012
Silverlight CNC | Barrington, IL
Category: Vertical CNC Machining Centers
Seller: Silverlight CNC
Location: Barrington, IL
Mfr: Maho
Model: DMU50V
Year: 2012
Used DECKEL MAHO DMU50V Vertical Machining Center, 2012 is Heidenhain CNC, 5-axis, and BT40 taper. : 21.68" x 17.7" x 15.74" travel, 60 ATC, 15,000 RPM, operating hours: 45,660. Tools/chucks not included., Year: 2012, x: 21.68 inches, y: 17.7 inches, z: 15.74 inches, # Axis: 5, Power: 28 Kilowatts, RPM: 15000.0, # ...more
Makino #C2200, Oilmatic, spindle chiller, 20000 RPM, serial #01097213, new, never used
Platinum Asset Services | Scarborough, ON
Category: Vertical CNC Machining Centers
Seller: Platinum Asset Services
Location: Scarborough, ON
Mfr: Makino
Model: C2200
MAKINO, C2200, 20K, OILMATIC, SPINDLE CHILLER, 220/3/60 S/N 01097213 - NEW NEVER USED, MAKINO C2200.
Makino #D500, 5-Axis, 21.6" X, 39.3" Y, A & C Axis, Makino Pro 5,113 automatic tool changer, Probing, coolant thru spindle, Rotary Tbl/Trunion, 2013, #32129
Prestige Equipment Corp | Melville, NY
Category: Vertical CNC Machining Centers
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Makino
Model: D500
Year: 2013
CAPACITY:, X-Axis Cross Travel: 21.65", Y-Axis Vertical Travel: 39.37", Z-Axis Longitudinal Travel: 19.68", A-Axis: +30/-120, C-Axis: 360, Table/Pallet Size: 15.74" x 15.74", Spindle Speeds: 14,000 RPM, Spindle Taper: HSK 63A, Rapid Traverse (X): 1889.76 IPM, Rapid Traverse, (Y & Z): 1968.50 IPM, Cutting Feed Rate ...more
Makino #DA300, CNC vertical machining center, 60 automatic tool changer, 18" X, 26" Y, 20" Z, 20000 RPM, HSK-A63, 30 HP, 5-Axis, Pro 6, 217 psi thru spindle coolant, 2018
Champion Machinery Inc | Fort Mill, SC
Category: Vertical CNC Machining Centers
Seller: Champion Machinery Inc
Location: Fort Mill, SC
Mfr: Makino
Model: DA300
Year: 2018
, X-Axis 17.7", Y-Axis 25.6", Z-Axis 19.68", A-Axis (Table Tilt) +30 to -120 degrees, C-Axis (Table Index) 360 Degrees, Spindle Speed 20,000 RPM, Spindle Taper HSK-A63, Spindle Motor 30 HP, Tools 60, Rapid Traverse Rates 2362 IPM, Max Table Load 551 lbs., Max Tool Diameter 2.75" / 5.51", Max Tool Weight 17.6 lbs., Max ...more
Makino #E33, CNC vertical machining center with System 3R Work Master robot, 25.6" X, 17.7" Y, 17.7" Z, 40000 RPM, 30 automatic tool changer, 2005
Machinery Network Inc | Encino, CA
Category: Vertical CNC Machining Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Makino
Model: E33
Year: 2005
2005 MAKINO E33, X Axis Travel. 25.6", Y Axis Travel. 17.7", Z Axis Travel. 17.7", Spindle Motor. 18.5 hp, Spindle Speed. 40,000 RPM, ATC Capacity. 30, System 3R Work Master Robot.
Makino #E33, graphite vertical machining center, Pro 5 Control, 25.6" X, 17.7" Y, 17.7" Z, 40000 RPM, 30 automatic tool changer, Blum laser, 2005
iGAM | Detroit, MI
Category: Vertical CNC Machining Centers
Seller: iGAM
Location: Detroit, MI
Mfr: Makino
Model: E33
Year: 2005
The Used 2005 Makino E33 Graphite Vertical Machining Center is a high-precision vertical mill specifically engineered for graphite machining applications, where dust control, fine surface finishes, and thermal stability are essential. Outfitted with the advanced Professional 5 Control (Fanuc 310is Model A) and key ...more
Makino #E33, vertical machining center, 30 automatic tool changer, 25.6" X, 17.7" Y, 17.7" Z, 40000 RPM, HSK E32, 11.25 HP, 35.5"x19.7"tbl., Professional 5, rigid tap, 2008
Arlington Machinery | Lake Zurich, IL
Category: Vertical CNC Machining Centers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Makino
Model: E33
Year: 2008
Used Makino E33 Hard Milling & Graphite VMC Travels: 25.6” x 17.7” x 17.7” Table Size: 35.5” x 19.7” Spindle Speeds: 400-40,000 rpm Spindle Taper: HSK E32 Spindle HP: 11.25 ATC: 30 Rapid Feed Rates: 1,574 ipm Cutting Feed Rates: ,574 ipm Max. Work Piece Weight: 1,102 lbs. New In 2008 ...more
Makino #E33, hard milling-graphite vertical machining center, 30 automatic tool changer, 25.6" X, 17.7" Y, 17.7" Z, 40000 RPM,HSK E32,19.7"x35.5"tbl., 3-Axis,Pro 5,rigid tap, 2008
Ditter Industries Inc | Lake Villa, IL
Category: Vertical CNC Machining Centers
Seller: Ditter Industries Inc
Location: Chicago, IL
Mfr: Makino
Model: E33
Year: 2008
ONE USED MAKINO HARD MILLING & GRAPHITE VMC, Model: E33, Travels: 25.6” x 17.7” x 17.7”, Table size: 35.5” x 19.7”, Spindle speeds: 400-40,000 rpm, Spindle taper: HSK E32, Spindle HP: 11.25, ATC: 30, Rapid feed rates: 1,574 ipm, Cutting feed rates: 1,574 ipm, Max. work piece weight: ...more
Makino #E33, CNC Vertical Machining Center, 25.6" x, 17.7" Y, 17.7" Z, 40000 RPM, 3 Axis, CNC Control, 2008
Myers Technology Co LLC | Elk Grove Village, IL
Category: Vertical CNC Machining Centers
Seller: Myers Technology Co LLC
Location: Elk Grove Village, IL
Mfr: Makino
Model: E33
Year: 2008
Makino Hard milling Machine with Graphite machining Package, makino Factory Maintenance program every 2000 hours, Model: E33, Travels: 25.6 x 17.7 x 17.7, Table size: 35.5 x 19.7, Spindle speeds: 400-40,000 rpm, Spindle taper: HSK E32, Spindle HP: 11.25, ATC: 30, Rapid feed rates: 1,574 ipm, Cutting feed rates: 1,574 ...more
JUST ADDED!
Makino #F3, 5-Axis CNC vertical machining center with Koma tilting rotary table, Professional 5 Control, 25.5" X, 19.6" Y, 17.7" Z, 30 automatic tool changer, 20000 RPM, 2014
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Makino
Model: F3
Year: 2014
Makino F3-5XR with Koma Tilting-Rotary Table5-Axis CNC Vertical Machining Center (subject to buyer verification):Table Size: 33.46” x 19.68”Table Load Capacity: 1433 lbsMax Work Size on Table: 33.46” x 19.68” x 17.72”Table Top to Spindle Face: 5.9”min./ 23.63”X Axis Travel: ...more
Makino #F5, Vertical Machining Center, 3-Axis, 35.4" X, 19.7" Y, 17.7" Z, 19.7" x 39.4" Table, 20000 RPM, HSK 63 Taper, 30 automatic tool changer, 2011
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Makino
Model: F5
Year: 2011
MAKINO F5 vertical machining center, Model 2011. s include a 3-axis, 20,000 RPM spindle, HSK 63 taper, and 30-tool ATC. : X: 35.4", Y: 19.7", Z: 17.7". Comes Professional 5 CNC Control, coolant tank & pump, laser tool setter., 2011 MAKINO F5, X. 35.4", Y. 19.7", Z. 17.7", RPM. 20,000 RPM, # ATC. 30, Taper. HSK 63 ...more
