Turbo-centrifugal Blowers in West Virginia

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Spencer

Model: C-1510-H-MOD

Used Spencer Turbine Company Centrifugal Blower 15HP 3545 RPM 460 Volt, 316 Stainless steel Gas Booster designed for 630 ICFM at 42" H2O (1.51 PSIG) at 212 F at 13.9 PSIA when handling gas at 1.187 specific gravity., 8" ANSI 125/150 flange inlet/outlet connections., 15HP, 3545RPM, severe duty, coupled direct ...more

630 cfm @ 42 S.P., Spencer Turbine Co. #C-1510-H-MOD, gas booster stainless blower, 15 HP, #17316

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Spencer

Model: C-1510-H-MOD

Used Spencer Turbine Co Gas Booster Stainless Blower 15HP Model C-1510-H-MOD, 316 Stainless steel Gas Booster designed for 630 ICFM at 42" H2O (1.51 PSIG) at 212 F at 13.9 PSIA when handling gas at 1.187 specific gravity., 8" ANSI 125/150 flange inlet/outlet connections., 15HP, 3550RPM, severe duty, coupled ...more

650 cfm @ 58 S.P., Twin City Fan #280-MBW, heavy duty pressure vacuum blower, 460 V., 3-phase

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Twin City Fan

Model: 280-MBW

Used 650 CFM @ 58" Twin City Fan Heavy Duty Pressure Vacuum Blower 280 MBW-SW, Performance listed above @.067 air density. *Increased performance can obtained by installed a larger motor., Serial Number 17-583118-1-1, Arrangement 8, 25HP direct drive, marine duty., 460V, 3PH, 60hz power required., MBW wheel s a ...more

650 cfm @ 58 S.P., Twin City Fan #MBW-SW, heavy duty pressure vacuum blower, 460 V., 3-phase

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Twin City Fan

Model: MBW-SW

Used 650 CFM @ 58" Twin City Fan Heavy Duty Pressure Vacuum Blower 280 MBW-SW, Performance listed above @.067 air density. *Increased performance can obtained by installed a larger motor., Serial Number 15-525816-2-1., Arrangement 8, 25HP direct drive, marine duty., 460V, 3PH, 60hz power required., MBW wheel s a ...more

JUST ADDED!

660 cfm @ 12 S.P., Industrial Air Inc. #9-35, Stainless Steel single stage centrifugal blower

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Model: 9-35

Used 660 CFM @ 12" SP IAP Industrial Ai Products Stainless Steel Fan Blower 9-35, Serial 26615-1., Stainles steel blower with an arrangement 9 frame., Wheel Type: Open radial blade, for material loading, Inlet: 4" flanged sanitary, Outlet: 4" reduced sleeve, 5HP V-belt drive (208-230/460V, 60Hz, 3ph). ...more

850 cfm @ 5.4" Hg, Spencer, blower package, 30 HP, used, #13657

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Spencer

850 CFM @ 5.4" Hg Used 30 HP Spencer Industrial Vacuum Package, s/n 310049., blower cat# 30104D1., Demonstration video on file. Weight of all three skids combined = 1,900 lbs.

900 cfm @ 47" S.P., Alusuisse Alesa, pressure blower package, 1.7 psi, 200 sq.ft.

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Used 25HP Alusuisse Alesa Pressure Blower Package 900 CFM @ 47" SP, Capacity: 900 CFM @ 1.7 PSI, Air Inlet: 12.75" sleeve, Air Outlet: 8.62" sleeve, 25HP direct drive motor, (230/460V, 60Hz, 3ph), Included accessories:, Acoustic enclosure with removable panels (62"W X 95"L X 55"H), 200 Sq/Ft ...more

3 Photos

900 cfm @ 47 S.P., Alusuisse Alesa, pressure blower, 25 HP, 200 sq.ft.

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Used 25HP Alusuisse Alesa Pressure Blower Package 900 CFM @ 47" SP, Capacity: 900 CFM @ 1.7 PSI, Air Inlet: 12.75" sleeve, Air Outlet: 8.62" sleeve, 25HP direct drive motor, (230/460V, 60Hz, 3ph), Included accessories:, Acoustic enclosure with removable panels (62"W X 95"L X 55"H), 200 Sq/Ft ...more

3 Photos

900 cfm @ 47 S.P., Alusuisse Alesa, pressure blower, 25 HP, 200 sq.ft.

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Used 25HP Alusuisse Alesa Pressure Blower Package 900 CFM @ 47" SP, Capacity: 900 CFM @ 1.7 PSI, Air Inlet: 12.75" sleeve, Air Outlet: 8.62" sleeve, 25HP direct drive motor, (230/460V, 60Hz, 3ph), Included accessories:, Acoustic enclosure with removable panels (62"W X 95"L X 55"H), 200 Sq/Ft ...more

943 cfm, 2.66" HG, Spencer, gas vacuum booster G-series, multi-stage centrifugal blower, 20 HP, 155°F

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Spencer

Used 20HP Spencer Gas Vacuum Booster G-Series, Rated for 943 ICFM at 2.66" HG (vacuum) at 155 Deg F and 13.29 PSIA, Carbon steel housing with riveted aluminum wheels., Inlet/Exhaust Connection: 8" ANSI 150 class flange, 20HP direct drive (3,525RPM) with reduction belt drive, Power Service: 208-230/460VAC ...more

1200 cfm @ 8 S.P., Spencer, tubular bag separator, 50 HP, used, #14203

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Spencer

Used 50HP Spencer Vacuum System - 1,200CFM @ 8" S.P., Serial number 310530., With tubular bag separator. 230/460 volt, 3550RPM, 60Hz, 3 phase., The suction inlet on the blower is 10" O.D., The dirty air inlet on the cyclone measures 8" O.D., Demonstration video available., *note only have 2 of the 3 legs.

1250 cfm @ 42.5 S.P., New York Blower #2306-ALUM, 15 HP, 8" flanged inlet, 6" flanged outlet, 23.5" x 22" pedestal

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: New York Blower

Model: 2306-ALUM

Used 1250 CFM @ 42.5" SP NYB New York Pressure Blower 2306 ALUM, Carbon steel housing with an aluminum wheel, 8" flanged inlet, 6" flanged outlet, 15HP direct drive motor (3,510RPM), 230/460V, 60Hz, 3ph, Pedestal Base: 23.5" X 22", Demonstration video available.

1550 cfm @ 44 S.P., Twin City #TBNA-SW 23N8, turbo pressure blower, 15 HP, pedestal base

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Twin City

Model: TBNA-SW

Used 1550 CFM @ 44" SP 15HP Twin City Turbo Pressure Blower 23N8 TBNA-SW, Serial No: 15-544740-1-1, The TBNA has a heavy-duty housing with a radial aluminum wheel., Inlet: 8" flange, Discharge: 8" flange, up-blast with manual damper, Wheel: 23.75" radial, narrow width, riveted aluminum, Pedestal base ...more

2200 cfm @ 69.7 S.P. New York #29010-STL, centrifugal pressure blower, 40 HP, 29" wheel

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Model: 29010-STL

Used 2,200 CFM @ 69.7" SP 60HP New York Centrifugal HP Pressure Blower 29010 STL, SHOP # 2016-14037-01, Mild steel construction for high pressure, industrial process applications., Arrangement 8 with motor pedestal with heavy-duty bearings., Wheel: Size 290 ( 29"), with clockwise rotation, Process Air Line ...more

4 Photos Video

2750 cfm @ 31 S.P., Cincinnati Fan #HP-10D21, centrifugal pressure blower, 25 HP, base mounted

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Cincinnati

Model: HP-10D21

UNUSED 25HP Cincinnati Fan HP-10D21 Centrifugal Pressure Blower 2,750CFM @ 31"SP, Serial No: 1609243, Mild steel construction, arrangement 4, CCW rotation, direct drive., Wheel: 21" type CR, welded steel radial blade, Inlet: 8.37" O.D. sleeve with guard, Discharge: 10" drilled flange, 25HP direct drive ...more

2800 cfm, Hoffman #65108A, multi-stage centrifugal exhauster blower, 3550 RPM, 8 stages, 200 HP

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Hoffman

Model: 65108A

Used 200HP Hoffman Multi-Stage Centrifugal Exhauster Blower 651 Series [PARTS], Operating Speed: 3550RPM max., Inlet Connection: 12" ANSI 125# bolt pattern (threaded), Outlet Connection: 10" ANSI 125# bolt pattern (threaded), Outlet installed with vibration isolator and wafer style check valve., Number of ...more

2976 cfm @ 3 S.P., New York Blower #224 LS, 7.5 HP, 230/460 V., 3-phase, 1770 RPM

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: New York Blower

Model: 224

2,976 CFM @ 3" SP New York Blower NYB Series 20 GI 7.5HP Fan 224 LS [Unused!], Shop Number: B10964 105, Series 20 GI, Mild steel housing with 19" LS wheel for material handling., 12.62" flanged inlet, 10.5" X 12.75" flanged outlet, 7.5HP V-belt drive, 230/460V, 60Hz, 3ph, 1,770RPM, Base Area ...more

3450 cfm, 61 S.P., Alusuisse Alesa, pressure blower, 75 HP motor, 300 sq.ft.

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Used 3450 CFM @ 61" SP (2.2 PSI) Alusuisse Alesa Pressure Blower Package, w/ Inlet Filter Acoustic Enclosure, Capacity: 3,450 CFM @ 2.2 PSI, Air Inlet/Outlet: 12.75" sleeves, 75HP direct drive motor, (230/460V, 60Hz, 3ph, 3545RPM), Included Accessories:, 300 sq/ft media area filter unit with high-efficiency ...more

3 Photos Video

3450 cfm, 61 S.P., Alusuisse Alesa, pressure blower, 300 sq.ft., inlet filter & acoustic enclosure

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Used 75HP Alusuisse Alesa Pressure Blower w/ Inlet Filter and Acoustic Enclosure, Capacity: 3,450 CFM @ 2.2 PSI, Air Inlet/Outlet: 12.75" sleeves, 75HP direct drive motor, (230/460V, 60Hz, 3ph, 3545RPM), Mounting area for the base measures 24"W X 33.75"L., Included Accessories:, Acoustic enclosure with ...more

2 Photos Video

4112 cfm @ 7 S.P., Cincinnati Fan #SQAF-240, square airfoil blower, 5 HP, 24" wheel, 27" inlet

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Cincinnati

Model: SQAF-240

Unused 15HP Cincinnati Fan SQAF-240 Square Airfoil Blower 4,112CFM @ 7" S.P., Serial No: 1207534, Mild steel construction, arrangement 4 square housing, direct drive., Wheel: 24" airfoil, half-width, CCW rotation, Inlet: 27" angle ring sleeve with centering cone, Discharge: 21.25"W X 23.75"H ...more

5080 cfm @ 31 S.P., Robinson Inc. #RL40-18, pressure blower, 40 HP, 3550 RPM, 13" inlet, 10" outlet

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Robinson

Model: RL40-18

Used 5,080 CFM @ 31" SP 40 HP Robinson Industries RL Pressure Blower Size 40-18, Mild steel radial blade wheel, 13" inlet, 10" square outlet., 230/460 VAC, 60Hz, 3 ph severe duty direct drive, 3550 max. RPM, Demonstration video on file.

5080 cfm @ 31 S.P., Robinson Inc. #RL, Pressure Blower, Size 40-18, 40 HP, 3550 RPM, 13" inlet, 10" outlet

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Robinson

Model: RL

Used 5,080 CFM @ 31" SP 40 HP Robinson Industries RL Pressure Blower Size 40-18, Mild steel radial blade wheel, 13" inlet, 10" square outlet., 230/460 VAC, 60Hz, 3 ph severe duty direct drive, 3550 max. RPM, Demonstration video on file.

JUST ADDED!

5800 cfm @ 12 S.P., New York Blower #26-DH, centrifugal fan, 2510 RPM

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: New York Blower

Model: 26-DH

New York Blower Series 20 GI Fan 5,800 CFM @ 12" SP Wheel Size 26 DH, Shop # 2022-15730-01., Max safe speed at 70 degrees is 2510 rpm.

3 Photos

6715 cfm @ 1 WG S.P., New York Blower, tubular centrifugal blower, 3 HP Baldor Reliance motor, 460 V., 3-phase, 1165 RPM

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: New York Blower

Unused 6715 CFM New York Blower Tubular Centrifugal Class 3 Axial Fan 30 ACF, Class 3, ARR-9S, Wheel Size/Type: 30 ACF backward incline), 6715 CFM @ 1" WG SP, 738 RPM, 3 Hp Baldor Reliance Motor, 460 Volt, 3PH, 1165 RPM, Side angle mount support brackets, Date of Manufacture: 2016, Shipping info: One skid ...more

6800 cfm @ 18 S.P., Buffalo Forge Company #35-AW, Centrifugal Exhauster Fan, 50 HP, 1765 RPM, 14.62" inlet, 18" x 1.5" outlet

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Buffalo

Model: 35 AW

Used 6,800 CFM @ 18" SP 50HP Buffalo Forge Centrifugal Exhauster Fan - 35 AW, Mild steel construction, Wheel: 26.5" with back plate, 14.62" flanged inlet, 8" X 10.5" flanged outlet, Base skid mount: 31"W X 66.5"L, 50HP drive (1765RPM) with V-belt reduction, Supply: 460V, 60Hz, 3ph.

7000 cfm @ 4 S.P., Twin City #BCV222C, industrial centrifugal fan, 22" wheel diameter, 7.5 HP TEFC Teco Westinhouse

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Twin City

Model: BCV222C

7,000 CFM @ 4" SP 7.5HP Twin City Industrial Centrifugal Fan BCV-222C, purpose exhaust or supply fan, Class 1 Arr 10, Wheel type: Flat Blade Backward Incline (Riveted Aluminum), Wheel Diameter: 22", Inlet: 24" flanged with inlet funnel, Outlet: 17.5" X 23.5" flanged, Side clean-out door, Base ...more

JUST ADDED!

7000 cfm, Hartzell Air Movement #A03-9-221BC100AAFCL3, backward curved centrifugal fan, 5 HP

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Hartzell

Model: A03-9-221BC100AAFCL3

Unused 5HP Hartzell Series 03 Backward Curved Centrifugal Fan, 7,000CFM, Order No: 90104546-4, Welded aluminum housing, arrangement 9, with bottom drain., Wheel: 23" type BC, welded aluminum, 100% width, CW rotation, Inlet: 23.62" sleeve, Outlet: 17.5" X 24.5" flange, Fan Speed: 1,414RPM, 5HP V-belt ...more

JUST ADDED!

7482 cfm @ 6 S.P., Cincinnati #RBE-15, centrifugal radial blade exhauster fan, 26" wheel, 15 HP

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Cincinnati

Model: RBE-15

Used 15HP Cincinnati Fan RBE-15 Centrifugal Radial Blade Exhauster Fan, Mild steel housing with Arrangement 4 - direct drive configuration., Performance: 7,482CFM, 6" SP, 19.0 BHP (range on file), Wheel: 26" full width, shrouded radial blade, clockwise rotation, Inlet: 14" sleeve, Outlet: 12.5" X ...more

7500 cfm @ 4 S.P., Twin City Fan #BCV-245, centriugal fan, 7.5 HP, 1755 RPM, 24" inlet, 17.5" x 23.5" outlet

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Twin City Fan

Model: BCV-245

7,500 CFM @ 4" SP Surplus Twin City Industrial Centriugal Fan 7.5HP BCV-245, purpose exhaust and supply fan, Class 1 Arr 10, Wheel type: Flat Blade Backward Incline (Riveted Aluminum), Wheel Diameter: 22", Inlet: 24" flanged inlet, Outlet: 17.5" X 23.5" flanged, Side clean-out door, Base footprint: ...more

7500 cfm @ 4 S.P., Twin City Fan #BCV245C, industrial centriugal fan, 22" diameter wheel, 7.5 HP motor

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Twin City Fan

Model: BCV245C

7,500 CFM @ 4" SP Surplus Twin City Industrial Centriugal Fan 7.5HP BCV-245, purpose exhaust and supply fan, Class 1 Arr 10, Wheel type: Flat Blade Backward Incline (Riveted Aluminum), Wheel Diameter: 22", Inlet: 24" flanged inlet, Outlet: 17.5" X 23.5" flanged, Side clean-out door, Base footprint: ...more

7961 cfm @ 45 S.P., New York Blower #30-HP, High Pressure Blower, 75 HP, 3555 RPM, 230/460 V, 2022

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: New York Blower

Model: 30 HP

Year: 2022

7,961 CFM @ 45" SP 75HP High Pressure New York Blower SIZE 30 HP Unused! Surplus, Arrangement 4 with counter-clockwise rotation, 30" backward curve wheel, Inlet: 20" companion flanged, Outlet: 7.5" X 16.5" flanged, 75 from horiz., 75HP high-efficiancy NEMA thermistor motor, 3555 RPM, 230/460VAC ...more

JUST ADDED!

8000 cfm @ 4 S.P., New York Blower, centrifugal fan, 22.25" PLR half-width wheel, 10 HP

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: New York Blower

Used 10HP New York Blower 222 PLR Purpose NYB Fan 8,000CFM @ 4" S.P., SHOP # Y02018 120, Mild steel housing with side inspection panel and weather/belt guard., Wheel: 22.25" PLR half-width (Clockwise rotation), Inlet: 24.25" sleeve with inlet funnel, Outlet: 16.75"W" X 24.5"H flange, 5HP V-belt ...more

8200 cfm @ 5 S.P., New York Blower #243 ACF, 10 HP, 24" wheel, 27" inlet

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: New York Blower

Model: 243

Unused 10HP New York Blower 243 ACF Purpose NYB Fan 8,200CFM @ 5" S.P., Shop No: 003838, Wheel: 24"welded steel, Acoustafoil type, CCW rotation, Inlet: 27" sleeve with manual damper, Outlet: 18.25" X 27.25" sleeve, Footprint of base mounting: 26" X 48"L, 10HP V-belt drive (208-230/460V ...more

JUST ADDED!

8500 cfm @ 12 S.P. Kice #FA18 9FB, centrifugal fan

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Model: FA18

Surplus 8,500 CFM @ 12" SP 25HP Kice Centrifugal Fan Model FA18 9FB [UNUSED!], Serial 267231-23., Mild steel FA series, arrangement 9FB belt-driven centrifugal fan., Fan Wheel: 18" airfoil, Air Inlet: 19" O.D. sleeve with inlet nozzle, Air Outlet: 13.5" X 20.75" flange with manual damper, Working ...more

12900 cfm @ 31.2 S.P., Robinson #RL 100-18, fan type pressure blower, 100 HP, 1780 RPM, Fr.405T

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Robinson

Model: RL

Used 100HP 12,900 CFM @ 31.2" SP Robinson Fan Type RL Combustion Blower, Type RL, Size 100-18, Serial No: 5410-N, Welded mild steel construction, rotatable fan housing., Wheel: 45" full width overhung, flat radial blade with back plate, Inlet: 20.5" flange, Outlet: 12.25" X 13" w/round flange ...more

20000 cfm @ 4 S.P., Twin City Fan #BCV-365C, backward inclined industrial, unused

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Twin City Fan

Model: BCV-365C

20,000 CFM @ 4" SP Twin City Fan Backward Inclined Industrial BCV365C [Unused!], Class 1 Arr 10, Shipping info: One skid, 78" L x 74" W x 68" H., 20HP TECO Westinghouse Severe Duty TEFC motor, 1760 RPM, 208-230/460 Volt, 256T frame., Weight = 1620 LBS., Demonstration video on file.

JUST ADDED!

20000 cfm @ 9 S.P., Kice Industries #FC26, Stainless Steel centrifugal fan

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Kice

Model: FC26

Surplus 20,000 CFM @ 9" SP Stainless Steel Kice FC26 Fan [UNUSED!], Serial 210652A-1., Stainless steel FC series centrifugal belt-driven fan with a 9F arrangement., Fan Wheel: 45.12" welded radial blade with backplate, Air Inlet: 31.25" sleeve reducer to a 26" at entry, Air Outlet: 25" X 21.25" ...more

JUST ADDED!

20000 cfm @ 9 S.P., Kice Industries #FC26, Stainless Steel centrifugal fan

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Kice

Model: FC26

Surplus 20,000 CFM @ 9" SP Stainless Steel Kice FC26 Fan [UNUSED!], Serial 210652A-1., Stainless steel FC series centrifugal belt-driven fan with a 9F arrangement., Fan Wheel: 45.12" welded radial blade with backplate, Air Inlet: 31.25" sleeve reducer to a 26" at entry, Air Outlet: 25" X 21.25" ...more

JUST ADDED!

20000 cfm @ 9 S.P., Kice Industries #FC26, Stainless Steel centrifugal fan

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Kice

Model: FC26

Surplus 20,000 CFM @ 9" SP Stainless Steel Kice FC26 Fan [UNUSED!], Serial 210652A-1., Stainless steel FC series centrifugal belt-driven fan with a 9F arrangement., Fan Wheel: 45.12" welded radial blade with backplate, Air Inlet: 31.25" sleeve reducer to a 26" at entry, Air Outlet: 25" X 21.25" ...more

20000 cfm @ 38 S.P., New York Blower Fan #30 AF-FIFTY, 200°F, 200 HP, #18658

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: New York Blower

Model: 30

Used 20,000 CFM @ 38" SP @ 200 F New York Blower Fan 30 AF 200HP NYB AF-FIFTY, Overall dimensions: 97" long x 58" wide x 59" high., SHOP # 2017-17015-03., Arrangement 8., Inlet: 26.5" I.D. flange, Outlet: 27" X 18" with vibration isolator, 200HP direct drive, inverter-duty (speed control ...more

20020 cfm @ 4.2 psi, FlaktGroup #HBXK-37/1271, Flaktgroup Stainless Steel industrial centrifugal blower fan, 3689 RPM, 20" inlet, 11" x 14" outlet

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Flaktgroup

Model: HBXK-37/1271

Unused 20,000 CFM @ 4.2PSI ABB Fl kt Stainless Industrial Centrifugal Blower Fan, Insulated and cladded stainless steel fan (skid mounted), Can perform up to 20,020CFM @ 4.2PSI, Max. Temperature: 302 F, Max. Speed: 3,689RPM, Air Inlet: 20" flanged with mist nozzle & bottom drain, Upblast Outlet: 11" X ...more

26000 cfm @ 1 S.P., Loren Cook #402-CA-SWSI, airfoil centrifugal fan, backward inclined

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Loren Cook

Model: 402-CA-SWSI

Used 26,000 CFM Loren Cook Airfoil Centrifugal Fan Backward Inclined 402 CA SWSI, Single width, backward inclined airfoil blade, belt driven centrifugal blower, Fan Wheel: 40" diameter welded aluminum backward incline airfoil, Air Inlet: 45.25" aluminum inlet cone (9.72 sq/ft inlet area), Air Outlet: 30" X ...more

30000 cfm @ 4 S.P., Twin City #365-BCV-SW, industrial exhaust fan, 37" wheel diameter, 40 HP TECO Westinghouse motor

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Twin City

Model: 365-BCV-SW

Used 30,000 CFM @ 4" SP Twin City Industrial Exhaust Fan Size 365 BCV-SW, Serial No 19 754993-1-2, purpose exhaust and supply fan., Class 2, Arrangement 10, Wheel type: Flat Blade Backward Incline with backplate, Wheel Diameter: 37", Inlet: 38.5" companion flange with aluminum inlet funnel, Outlet: ...more

30000 cfm @ 4 S.P., Twin City #365-BCV-SW, industrial fan, 37" wheel diameter, backward incline, 40 HP TECO Westinghouse motor

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Twin City

Model: 365-BCV-SW

Used 30,000 CFM @ 4" SP Twin City Industrial Fan Size 365 BCV-SW Backward Inclin, Serial No 19-754993-1-1., Class 2, Arrangement 10, Wheel type: Flat Blade Backward Incline with backplate, Wheel Diameter: 37", Inlet: 38.5" companion flange with aluminum inlet funnel, Outlet: 10.5" X 14" with ...more

30000 cfm @ 4 S.P., Twin City #365-BCV-SW, industrial fan, 37" wheel diameter, backward incline, 40 HP TECO Westinghouse motor

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Twin City

Model: 365-BCV-SW

Used 30,000 CFM @ 4" SP Twin City Industrial Fan Size 365 BCV-SW, Serial No 19-754993-1-3., Class 2, Arrangement 10, Wheel type: Flat Blade Backward Incline with backplate, Wheel Diameter: 37", Inlet: 38.5" companion flange with aluminum inlet funnel, Outlet: 10.5" X 14" with companion angle ...more

33000 cfm @ 11 S.P., Fan Equipment Co. #BCS, backward incline centrifugal fan, 100 HP

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Model: BCS

Used 100HP Fan Equipment Co. Backward Incline Centrifugal Fan 33,000CFM @ 11"SP, High-efficiency output for dust collection and air handling applications., Fan Type: BCS; Fan Size: 6 1/2, Wheel: 42" flat blade backward incline, welded carbon steel, Fan Speed: 1,451RPM (1,570RPM max.), Inlet: 40.25" flange ...more

33000 cfm @ 75 S.P., Twin City #BCN-SW, size 730,29" inlet, 16" x35" outlet, #16274

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Twin City

Model: BCN-SW

52,000 CFM @ 50" SP Twin City Industrial Fan BCN-SW Size 730 Blower [Unused!], *elevated temperature design (350 F), corten housing, with mild steel wheel and shaft, Unused Twin City Industrial Fan BCN-SW Size 730 Blower, Size: 730, Model No: BCN-SW, Serial No: 13-489433-1-1, Arrangement: 8, Class: H, Tag No: ...more

35000 cfm @ 12 S.P., Viron Frp Fiberblass centrifugal fan #VCB-1100 Series, 2004, #11949

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Viron

Model: VCB-1100

Year: 2004

35,000 CFM @ 12" SP Used Viron Frp Fiberglass Centrifugal Fan Vcb-1100 Series, Model vcb-1149, s/n: 12739, Class II. Heavy plate steel pedestal, all fiberglass backward incline wheel and fan housing, stainless steel internal hardware, arrangement 9, upblast clockwise rotation. Power: 125hp, 1785rpm, 460v, 3 phase ...more

Eclipse #SM8828-15, turbo pressure blower, 15 HP

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Eclipse

Model: SM8828-15

Used 15HP Eclipse Turbo Pressure Blower, Catalog Number: SM 8828-15, Mild steel centrifugal pressure blower that provide low pressure air for industrial combustion systems, Riveted aluminum wheel, CCW rotation, Capacity: 53,000CFH, Pressure: 32OZ, Inlet: 8" flange, Outlet: 8" ANSI 125 companion flange ...more

Gardner Denver #4205-AD00, multi-stage centrifugal blower exhauster, 6" i/o, no drive included

JM Industrial LLC | Millwood, WV

Category: Turbo-centrifugal Blowers

Seller: JM Industrial LLC

Location: Millwood, WV

Mfr: Gardner Denver

Model: 4205-AD00

Gardner Denver Multi-stage Centrifugal Blower Exhauster 4205-AD00, Heads, sections, bearing housing constructed of cast iron, Impellers are cast aluminum (443 alloy), 6" inlet/outlet flange connections with ASA 125# threading, Foot mounted base, No Drive Included.