Slitters in Ohio

MODEL #: PPR-100, SERIAL #: XP-316/C1854, 5" WIDE, 1" ARBOR, 17 FT POUNDS OF TORQUE, LOOP SENSOR, FORWARD AND REVERSE JOG, ADJUSTABLE COIL GUIDE RAILS, ENTRY AND EXIT CASCADE GUIDE, 115 VOLT, 2001 NEVER USED, $10,000 REPLACEMENT COST, 2' LR x 2' FB x 40" TALL APPROXIMATE DIMENSIONS, 300 LBS APPROXIMATE WEIGHT ...more

Ruesch Precision Slitter Head, Model: 76, Width: 13", Arbor Diameter: 2.875", -Swing Away Entry Unit, Adjustable Side Guides, Passline Roll, Non Driven Pinch Rolls, -Independent Arbor Parallel Adjustment, -Steel Stripper Ring Assembly, -Main Motor Capacity: 12 HP @ 1750 RPM, -Reducer Ratio: 16:1, -Reducer Coupling has ...more

16" wide 4" dia. arbors complete set of tooling.

MODEL #: N/A, SERIAL #: N/A, 30" FACE x 4" DIAMETER ARBORS, PARALLEL ARBOR ADJUSTMENT, AC MOTOR DRIVEN THROUGH MANUAL TRANSMISSION BELT TO ARBORS, 44" PASS LINE, SMALL AMOUNT OF TOOLING INCLUDED, 80" LR x 31" FB x 67" TALL APPROXIMATE DIMENSIONS, GOOD CONDITION.

SERIAL. 3744, ARBOR DIAMETER. 4-1/2", MAXIMUM BETWEEN COLLARS. 28", 28" ENTRY PASSLINE ROLLS., MECHANICALLY ACTIVATED DISENGAGED JAW CLUTCH FOR PULL THRU SLITTING, 7-1/2 HP FEEDUP DRIVE.

Stamco Slitter Head, (1) Removable Head Type, 5" Dia. x 30" Face Arbors, Double-Eccentric Arbor Adjustment, Entry Driven Pinch Rolls, 8" Dia. x 30" Face, 15 HP AC Motor, Entry Side Guides, Manual Adjustment, 125 HP GE DC Motor, 650/1900 rpm, 240 V, Falk Reducer w/9.212:1 ratio, rated at 125 HP, Less Slitter Tooling ...more

Stanat Slitter Head, -36" Wide, -3.50" Dia. Arbors, -Parallel Arbor Adjustment, -Threading Drive, -In Storage.

36" Stamco Slitter Head, -4" Dia. x 40.5" Face Arbors, -Entry Passline Roll, -Entry Side Guides, Manual Adjustment, -Double Eccentric Arbor adjustment, -Passline Height: 32.5", -Overall Size: Slitter Head - 126" L x 88" W x 48" High, 5,800 lbs., Drive Base - 60" L x 53" W x 48" High, 3,000 lbs., -In Storage: Toledo, OH.

Paxson Slitter Removable Type Head, -5.00" Dia. x 37" Face Arbors, -Entry Driven Pinch Rolls, -Entry Side Guides, Manual Adjustment, -Parallel Arbor Adjustment, -7.5 HP AC Motor Threading Drive, 1745 RPM, 230/460 V, -5 HP Eaton Dynamatic Ajusto-Spede Drive, 1755 RPM, 230/460 V, Thru Drive-All Model DAU 512 ...more

Material Thickness:.006" -.040" 20 HP (Approximate) DC Motor, 240 Volt Complete with Knives, Spacers and Rubber Stripping Rings *Price reflects the cost for each Slitter Head**, 36"5" Diameter Arbors (2 Heads, One on Line, One Out Being Set Up).

Herr Slitter Head, -36" Wide, -6.00" Dia. Arbors, -Parallel Arbor Adjustment, -AC Motor Threading Drive, -Less Tooling, -In Storage.

(2) - 42" x 6" Yoder Slitter Heads, -Entry Unit:, Powered Entry Pinch Rolls, Manual Side Guides, Powered retraction to accommodate Slitter Head "Swing"., -Slitter Assembly:, Turret Configuration with Powered Rotation, Two (2) Slitter Heads, 6" Diameter Arbors, 43.5" Arbor Face, Powered Outboard Retraction, Top Arbor ...more

42" x 7" Diameter Arbor Cutting Capacities (Stainless Steel): 6 Cuts in.250" at 100 FPM Constant 8 Cuts in.187" at 150 FPM Constant 11 Cuts in.125" at 300 FPM Maximum 15 Cut in.093" at 400 FPM Maximum Slitter Drive Pinion Gearboxes: Main Gearbox (Falk) 4.91:1 Ratio 2 Speed Secondary Gearbox 1.53 & 3:1 Ratios 60 HP ...more

BRADBURY SLITTER WITH STRAIGHTENER, CAPACITY. 48" X 14 GAUGE MILD STEEL, CAPACITY. 48" X 18 GAUGE STAINLESS, SLITTER ARBOR. 6" DIAMETER, ENTRY PINCH ROLLS. 6" DIAMETER, ADJUSTMENTS ALL MANUAL. YES, STRAIGHTENER. 7 ROLL 3 OVER 4, STRAIGHTENER ROLLS. 3" DIAMETER, CASCADE EXIT ROLLS. 3" DIAMETER, POWERED. YES.

-48" Wide Removable Head, -7.00" Dia. Arbors, -Outboard Head slides into 36", -Cincinnati Design, -Very little use, -No Drive Motor, -No Tooling, -In Storage.

Wean 48" Slitter Head, -7.00" Diameter Arbors, -Entry Driven Pinch Rolls, -Entry Side Guides, Manual Adjustment, -Parallel Arbor Adjustment, -20 HP AC Motor Threading Drive, -Tooling, -In Storage: Toledo, OH.

Custom slitter designed to cut 48" sheets into (8) 6" strips, the slitter is comprised of a feed conveyor 54" wide x 36" long, chain driven pull rolls via 7.5 HP 230/460 VAC motor, seven (7) rotary knives. O/A dimensions 62" x 74" x 95"H.

, Make: Loopco, Arbor Width: 54", Arbor Diameter: 5", Pass Line: 41.5", Design Swing Head, Entry Pinch Rolls, Adjustable Edge Guides, Adjustable Arbors (Vertical Top Screw), 5HP Feed Up Motor, 3HP DC Helper Drive.

(2) Pro Eco Slitter Heads, -Injector Type Heads, -Model: SESIH 12107554, -Two (2) Heads - 7" Diameter x 59.5" Face Arbors, -Entry Passline Rolls, -Entry Side Guides, -Powered Outboard Retraction, -Manual Top Arbor Parallel Adjustment, -Single Eccentric Adjustment, -60 HP AC Motor, 1775 RPM, 230/460 V, Thru Falk ...more

-60.5" Arbor Face Width, -8" Dia. Arbors, -Parallel Arbor Adjustment, -Morse overrunning clutches, Model MG-750, -Includes Pinion Stand, -Less Base, -Less Drive Motor, -Removed and in Storage.

Year: 1999, Width: 62", Arbor Dia.: 9", Motor: 100 HP D.C., Transmission Ratio: 7.778 input 2,250 RPM.

s: With Solid State SCR Drive Orbit Hydraulic Adjust Twin Roll Entry Side Guides, Single Screw With Shimless Tooling, Alcos68" Wide x 12" Diameter150 HP, 650/1950 RPM, 500 Volt DC Baldor Motor.