Also See 6 Results
Sierra Idromec #3500, shear - baler - logger, used
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Sierra
Model: 3500
135 HP, Diesel Engine, New in 1992.
Sierra #700T, Shear Baler, (2) 100 HP, 14-17 Tons/hr. Shearing, 12-14 Tons/hr. Baling, 15-17 Tons/hr. Logging, 19' 8" x 7' 8" open & 19' 8" x 32" x 24" close folding box, 34" x 22" shear throat, 1998
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Sierra
Model: 700T
Year: 1998
SIERRA 700T Shear Baler, • (2) 100 HP Electric Motors, • Preload Table, • Pre-Compression, • Shearing: 14 - 17 Tons per hour, • Baling: 12 - 14 Tons per hour, • Logging: 15 - 17 Tons per hour, • Cylinders: 1 - Main Compression Ram; 6 - Folding Box Rams, • Cylinder Forces: Shear ...more
Sierra #700T, shear baler, (2) 90 KW motors, manual & automatic cycles, soft start electric system
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Sierra
Model: 700T
Model 700T, Stationary, Hydraulic, • (2) Rexroth Variable Displacement Pump, • (2) Denison Double Vane Type Pump, • Maximum Operating Pressure of 4300 PSI, • 100% Filtration with 20 Micron Filters, • Complete System Relief Protection, • Hydraulic Oil Cooling and Heating, • 780 Gallon ...more
Sierra #700T, baler / logger, (2) 100 HP motor, 1997
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Sierra
Model: 700T
Year: 1997
SIERRA - 700T,.Shear Baler, • (2) 100 HP Electric Motors, • Preload Table, • Precompression, • Shearing: 14 - 17 Tons per hour, • Baling: 12 - 14 Tons per hour, • Logging: 15 - 17 Tons per hour, • Cylinders: (1) Main Compression ram; (6) folding box rams., • Cylinder forces: ...more
Sierra, 700 ton shear baler, (2) 125 HP electric motors, 1750 RPM, 440-480 V., manual & automatic cycles, used
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Sierra
Model: 700T
Model 700T, Stationary, Approximate Per Factory Literature:, Power:, 2-90kW Electric Motors (Approx 120HP), 1788 R.P.M., 440-480 Volts, 3 Phase, 60 Cycle (380V 50HZ Upon Request), Total Maximum Amperage Draw 363 Amps, Soft Start Electric System ( Y DELTA ), Master Electrical Panel With PLC, UL Listed Located on ...more
Get email updates for newly added Scrap Baler and Scrap Metal Balers - Ferrous
Sierra #RB5000, portable baler / logger, 2011
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Sierra
Model: RB5000
Year: 2011
SIERRA - RB5000,.Portable Baler/Logger, New in 2011, • Faster cycle times equals higher production volume., • s an easy-to-load loading box that opens to 16’-5” x 8’-1” and short-stroke rams that greatly reduce cycle times. These powerful rams crush each load with 240 tons of force ...more
