Also See 8 Results
4 Stand, Dexter rollformer, 5" roll space, 2.125" shaft diameter, 3 HP, 9" horiz.centers
Pearl Equipment Co | Nashville, TN
Category: Rollformers
Seller: Pearl Equipment Co
Location: Nashville, TN
Mfr: Dexter
DEXTER 4 STAND ROLL FORMER, DIAMETER SHAFTS | 2.125", ROLL SPACE | 5", HORIZONTAL CENTERS | 9", VERTICAL ADJUSTMENT | 2", CURRENTLY TOOLED FOR 15" CORVETTE WHEEL TRIM, GOOD CONDITION, MOTOR 3 HP 230/460V 60C 3PH.
12 Stand, Dahlstrom #360-12OB, rollformer, 1-1/2" spindle diameter, 10" roll space, 8" horizontal center, 4"-5" vertical adj., #13854J
Timco Inc | Columbia, TN
Category: Rollformers
Seller: Timco Inc
Location: Columbia, TN
Mfr: Dahlstrom
Model: 360-12OB
DAHLSTROM 12 STAND ROLLFORMER, STOCK# 13854J, S/N 330, MDL#360-12 OB, NUMBER OF STANDS 12, SPINDLE DIA 1-1/2", ROLL SPACE 10", HORIZONTAL CENTER 8", VERTICAL ADJ 4" - 5", BASE TO CENTER LINE OF LOWER SPINDLE 4-1/2", 10 HP MOTOR, START/STOP, RUN/JOG BUTTONS.
12 Stand, Lockformer duplex panel rollformer, 22 gauge, 1-1/4" shaft diameter, 6"-36" adjustable roll space, 80 FPM, 10 HP, 1994, #13324J
Timco Inc | Columbia, TN
Category: Rollformers
Seller: Timco Inc
Location: Columbia, TN
Mfr: Lockformer
Year: 1994
LOCKFORMER 12 STAND DUPLEX PANEL ROLL FORMER, STOCK# 13324J, S/N# 12DSC-2906, New 1994, Capacity: 22 ga., Number of forming stands: 12, Shaft diameter: 1-1/4", Roll space: 6" - 36" (adjustable), Vertical centerline distance: 3-1/2", Speeds approx.: 80 FPM, Horizontal center 6", Motor 10 HP, OAD 8"L x 7'W x ...more
14 Stand, Lockformer #14D-SC Duplex rollformer, 1-3/8" shaft, 8" horizontal/4-1/2" vertical centers
Pearl Equipment Co | Nashville, TN
Category: Rollformers
Seller: Pearl Equipment Co
Location: Nashville, TN
Mfr: Lockformer
Model: 14D-SC
LOCKFORMER 14 STAND DUPLEX ROLLFORMER, MODEL | 14D-SC, NUMBER OF STANDS | 14, SHAFT DIAMETER | 1-3/8", HORIZONTAL CENTERS | 8", VERTICAL CENTERS | 4-1/2", MAX SHEET WIDTH | 60", ELECTRICAL | 240/480 VAC 3 PHASE, CURRENTLY WIRED 480 VAC, MOTOR: 10 HP.
14 Stand, Lockformer, rollform line, 12" roll space, 1.5" shaft, AMS Control, 3000 lb.uncoiler
Pearl Equipment Co | Nashville, TN
Category: Rollformers
Seller: Pearl Equipment Co
Location: Nashville, TN
Mfr: Lockformer
Year: 1999
LOCKFORMER ROLL FORM LINE, NUMBER OF STANDS | 14, NUMBER OF PASSES | 10, ROLL SPACE | 12", SHAFT SIZE | 1.5", VERTICAL CENTERS | 4", VERTICAL ADJUSTMENT |.5", HORIZONTAL CENTERS | 6", TOOLING PROFILE | ROLL UP GARAGE DOOR, GEAR DRIVEN, UNIST LUBE SYSTEM ...more
Get email updates for newly added Rollformers
16 Stand, Bradbury rollform line, 1.5 rafted, 16 passes, 18" RS, extra rafts, 4"-5.5" vrt.adj., 1991
Pearl Equipment Co | Nashville, TN
Category: Rollformers
Seller: Pearl Equipment Co
Location: Nashville, TN
Mfr: Bradbury
Year: 1991
BRADBURY ROLL FORM LINE, BRADBURY RAFTED 1-1/2" ROLL FORMER, 16 PASSES (COMPLETE EXTRA SET OF RAFTS), 18" ROLLSPACE, 9" HORIZONTAL CENTERS, 4 TO 5-1/2" VERTICAL ADJUSTMENT, CHAIN DRIVE (DRIVEN WITH 2 GEAR BOXES, 1 FOR EACH SET OF 8 STANDS), ADJUSTABLE TRAVERSING BASE WITH 2 POSITIONS, 1750 RPM, 7.5 HP ...more
20 Stand, ASC #20HM-3-1/2, rollformer, 3.5" shaft diameter, 42" roll space, L to R, #14073J
Timco Inc | Columbia, TN
Category: Rollformers
Seller: Timco Inc
Location: Columbia, TN
Mfr: Asc
Model: 20HM-3-1/2
ASC 20 STAND ROLL FORMER, STOCK# 14073J, MODEL NUMBER: 20 HM-3 1/2, S/N: 85431, ROLLSPACE: 40", HORIZONTAL CENTERS: 14", VERTICAL ADJUSTMENT: 6.375" - 8.750", SHAFT DIAMETER: 3.5", LINE DIRECTION: R-L, BASE TOP TO CENTER LOWER SPINDLE: 7.625", MILL BED TO FLOOR 28.5", ENTRY GUIDE, ELECTRICAL PANEL, MOTOR: 40 HP 480 ...more
20 Stand, Tishken #10-MW-2, rollformer, (2) 10 stand bases, 2" spindle diameter, 8.5" roll space, 12" horizontal center, #13870T
Timco Inc | Columbia, TN
Category: Rollformers
Seller: Timco Inc
Location: Columbia, TN
Mfr: Tishken
Model: 10-MW-2
TISHKEN 20 STAND ROLLFORMER, STOCK# 13870T, S/N 21408-11-94, MDL#10-MW-2, (2) 10 STAND BASES, NUMBER OF STANDS 20, SPINDLE DIA 2", ROLL SPACE 8.5", HORIZONTAL CENTER 12", VERTICAL ADJ 5-1/4" - 6-3/4", BASE TO CENTER LINE OF LOWER SPINDLE 5", MOTOR, START/STOP, RUN/JOG BUTTONS, COOLANT.
