Rollformers in New Jersey

7 STAND YODER M1.5 ROLL FORMING LINE, CURRENTLY TOOLED FOR CABINET RACK INDUSTRY, CONSISTING OF:, 2500 LBS LITTEL UNCOILER, CAPACITY - 2500 LBS, WIDTH - 12", ID RANGE - 16"-20", 32 TON MINSTER #4 OBI PRE-PUNCH PRESS, MODEL NUMBER - 4, TONNAGE - 32, STROKE - 4", SLIDE ADJUSTMENT - 2", AIR CLUTCH, FLYWHEEL, 7 STAND ...more

7 STAND CUSTOM ROLL FORMER W/ INLINE PUNCH PRESS, MANUFACTURER - CUSTOM, ROLL SPACE - 8.5", ARBOR - 2", HORIZONTAL CENTERS 11", VERTICAL CENTERS - 3" - 6", MOTOR - 1.5 HP DAYTON MOTOR, 230 VAC, 3 PH, 60 HZ, 1725 RPM, INCLUDES:, INLINE PUNCH PRESS, w/ 2 HP 220/440 VAC, 3 PH, 60 HZ, 750 RPM, DIMENSIONS, 11' 4" L x ...more

, 8 Stand Tishken Roll Former Model: SHMW 1 1/2, Number of Stands: 8 Spindle Diameter: 1 1/2" Roll Space: 6", Horizontal Centers: 9", Vertical Adjustment: 4 1/2 - 5 1/2 Air Clutch, Motor: 7.5 HP.

, Number of Stands: 10, Line Direction: Right to Left, Roll Space: 10", Horizontal Centers: 12", Vertical Adjustment: 4" - 5", Base to Center Lower Spindle: 4", Spindle Diameter: 1-1/4", Base working Surface: 26-1/2", Base Coolant Trough: 31-1/2", Pass Line: 38", Line Speed: 150 FPM, Pushbutton Motor Starter & ...more

, 1-1/2" ARBOR DIAMETER, 10 STANDS, 7" ROLL SPACE, 11" DISTANCE HORIZONTAL CENTER TO CENTER, INBOARD ROLL FORMER, FLOW - RIGHT TO LEFT, MOTOR DRIVE: 15 HP, 220/440V, 3PH, 60 CYC, 1800 RPM, WITH CONTROLS; HYDRAULIC DRIVE, OVERALL SIZE ROLL FORMER: 12'9" L x 4'6" W x 5' H, OVERALL SIZE DRIVE : 3'4" L x ...more

ARDCOR 12 STAND ROLL FORMER MODEL SF, SERIAL # 5134-A, 1964, Line Direction: Right to Left, Entry Guide, Number of Stands: 12, Roll Space: 5-1/2", Horizontal Centers: 10", Vertical Adjustment: 4" - 5-1/4", Spindle Diameter: 1-1/2", Spindle Ratio.Equal, Drive HSG Reduction Ratio.12:1, Base Coolant System, Main Drive ...more

ROLLFORMER:, Number of Stands: 12, Line Direction: Right to Left, Spindle Diameter: 1-1/2" (38.1mm), Roll Space: 12" (304mm), Horizontal Center: 14" (355mm), Vertical Adjustment: 4" - 6" (106mm - 152mm), Base Top to Center Lower Spindle: 6" (152mm), Spindle Key Size: 3/8" (9.525mm), Dimensions & Weight : ...more

, Number of Stands: 15, Line Direction: Right to Left, Spindle Diameter: 1-1/4", Roll Space: 11", Horizontal Center: 12", Vertical Adjustment: 3-1/2" - 5", Base to Center Lower Spindles: 3-1/2", Base Working Surface: 26-1/2", Base Coolant Trough: 31-1/2", Strip Pass Line: 38", Line Speed: 150 FPM.

18 STAND CUSTOM ROLL FORMER, MANUFACTURER - CUSTOM, STANDS - 18, ARBOR - 1.75", ROLL SPACE - 12", ADJUSTMENT - 3", MOTOR - 75 HP RELIANCE DC MOTOR, 1750/2100 RPM, 500 VOLTS, INCLUDES:, RELIANCE VFD CONTROL, DIMENSIONS, 21' 1" L x 7' W x 8' 4" H x 23,800 LBS.

19 STAND ARDCOR TOOLED DECKING LINE, 42" RS, 2.25" ARBOR, CONSISTING OF:, L-TYPE COIL CAR, 48" X 20,000# UNCOILER, 16"-20" ID, HYDRAULIC WEDGE EXPANSION & OVERARM, ARDCOR ROLL FORMER, ENTRY STRIP GUIDE, # OF STANDS - 19, SHAFT DIAMETER - 2.25", ROLL SPACE - 42", VERT. SHAFT CENTERS - 5" TO 10", HORIZ. SHAFT ...more

SERIAL. 74250, MODEL. F-15-4-57, BASE STAND CAPACITY. 24, NUMBER OF STANDS. 22, DIAMETER OF ARBORS. 4", ROLL SPACE. 57", HORIZONTAL CENTERS. 16", VERTICAL DISTANCE BETWEEN ARBORS. 5" MIN, 9" MAX, BASE TO CENTER OF LOWER ARBOR. 6-1/2", GEARING. EQUAL, RATIO. 1 TO 1, ENTRY PINCH ROLLS. 54", ENTRY EDGE GUIDES, SHEET ...more

22 STAND ON 24 STAND BASE X 3-1/2" ROLL FORMING LINE, CONSISTING OF:, TISHKEN MODEL 24HW S3-1/2 ROLL FORMING LINE, Line Direction. Left to Right, # of Stands. 22 Stands on a 24 Stand B, Spindle Diameter. 3-1/2", Roll Space. 20", Horizontal Centers. 14", Vertical Centers. 7-1/2" to 9", Main Motor Drive. 75 HP, 500 ...more

, Manufacturer: Bradbury, Year: 1986, Model No: 425, Spindle diameter: 3-1/2", Vertical Adjust: 6-14", Horizontal Centers: 22", Roll Space : 30", Drive Motor: 100 HP AC Motor, Speed: Appx 175 fpm, No. of Stands: 12/12, Includes:, Cee & Zee Tooling.

MODEL. 32-XHW-4, YEAR. 1997, NUMBER OF STANDS. 32, SPINDLE DIAMETER. 4 1/2'', ROLL SPACE. 70", HORIZONTAL CENTERS. 18'', VERTICAL CENTERS. 8'' - 11'', US VARIABLE SPEED DRIVE. 100 HP, TOOLED FOR GMT900 PANEL, EQUAL GEARED QUANTUM III DIGITAL, DC DRIVE.

Product Lockformer Triplex Cleatformer Slips, Drives, & Pittsburgh Lock, (2) Inboard Stations for Flat Slips and Drives, (2) Outboard Stations- I Pittsburgh Lock & 1 Open, Wired- 3 hp 115-208/230v 1 Phase.

Product Lockformer Acme Lock & Pittsburgh Machine, Acme Lock & Pittsburgh, Capacity: 18-26ga, Wired 230/460 3ph.

LOCKFORMER TRANVERSE DUCT NOTCHER CAPACITY. 18 GAUGENOTCHING HEADS. 5DEPTH OF NOTCH. VARIABLEMOTOR.″ HP / 230/460 VOLT /″ PHASE DIMENSIONS: 121-1/2" X 24" X 45"WEIGHT: 800 LBS.

Product Lockformer 14ga Pittsburgh Rollformer, Serial # 14409, Capacity: 14–16 gaugeDepth of Pocket/Size: 1/2″ Uses approximately 1 3/8″ of materialOther: Width of hammer-over edge adjustable up to 3/8″. Extended shafts for mounting auxiliary rolls.Speed: 35 feet per minuteMotor/Voltage: 5 H. ...more

Product, Lockformer Slips. Drives, & Pittsburgh Rollformer, High Speed Machine, Capacity- 22ga, Wired 230/460 3ph.