17 Results
1.3 cu.ft. J.H. J.h. Day Ribbon Blender, 304 Stainless Steel, 1.5 HP, 1983
Federal Equipment Company | Cleveland, OH
Category: Ribbon Mixers and Blenders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: J.h. Day
Year: 1983
Used 1.3 cu ft Day ribbon blender, 304 stainless steel construction, approximately 13" wide x 16" long trough, double ribbon, outboard roller bearings, 3" center bottom outlet with manual slidegate valve, packing glands, cover, 1.5 hp motor drive, serial# 89910, built 1983.
5 cu.ft. J.H. Day, Double Ribbon Blender, Carbon Steel, 1.5 HP, 220/440 V.
Federal Equipment Company | Cleveland, OH
Category: Ribbon Mixers and Blenders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: J.h. Day
Used 5 cu ft Day ribbon blender, carbon steel construction, approximately 17" wide x 38" long trough, double ribbon, outboard roller bearings, center bottom outlet with manual discharge valve, chain and sprocket driven with 1.5 hp, 220/440 volt motor drive, and cover, serial# 77815.
5 cu.ft. J.H. Day, 304 Stainless Steel fully jacketed single shaft double ribbon blender, dual hinged dust tight lid w/7/8" center vent
Frain Industries | Carol Stream, IL
Category: Ribbon Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: J.h. Day
5 Cuft, 304 S/S, fully jacketed, single shaft double ribbon blender (37 gallon working capacity) and a 6 cubic foot (45 gallon) overall capacity. Has side liquid injection w/ 5 ports. Chamber measures 38"(W) x 17"(L) x 18"D). Jacket working pressure 80 psi @ 324 Deg. F. Shell working pressure is ...more
16 cu.ft. J.h. Day, double ribbon mixer, 304 Stainless Steel contact parts, flip up cover, 5 HP drive, 3-1/2" center bottom discharge
Frain Industries | Carol Stream, IL
Category: Ribbon Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: J.h. Day
J H Day, 16 ft³ workable, double ribbon mixer with 304 stainless steel contact parts. Inner mixing chamber dimensions: 60" in Length; 24" in Width; 26" in Depth. flip up cover, 2" diameter mixing shaft with 1" wide x ¼" thick (outer) and 1¼" wide x (1/8)" ...more
17 cu.ft. J.h. Day, 304 Stainless Steel double ribbon blender, flip top cover, 8" center bottom discharge
Frain Industries | Carol Stream, IL
Category: Ribbon Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: J.h. Day
304 S/S Double ribbon blender with 17 cu ft working capacity (19.5 cu ft full capacity). Chamber dimensions: 52" in Length; 24" in Width; 29" in Depth. : flip top cover, 2" double ribbon shaft and center bottom 8" discharge with 42" floor clearance., OAD 88" L x 48" W x 86" ...more
Get email updates for newly added Ribbon Mixers and Blenders
Ribbon mixers and blenders (also known as ribbon agitators) are machines designed for thoroughly mixing powders, granules, and pastes through a double-helix ribbon blade. This design moves materials both radially and laterally, ensuring a uniform blend. Commonly used in food processing, pharmaceuticals, and chemicals, ribbon mixers are ideal for dry blends, spice mixes, and powder formulations.
28 cu.ft. J.H. Day #D-8, Stainless steel double ribbon blender, hinged flat top cover with gasket & swivel screw clamps, 10 HP
JM Industrial LLC | Millwood, WV
Category: Ribbon Mixers and Blenders
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: J.h. Day
Used 10HP JH Day Stainless Steel 28 Cu/Ft Double Ribbon Blender, Serial No: 2154, 304 stainless steel material contact surfaces (100 R.M.S. finish), Mixing chamber dimensions: 26" W X 66" L X 28.5" D., Blender shaft ends supported on pillow block bearings with packing gland rotary seals., Hinged flat top ...more
35 cu.ft. J.h. Day #D-10, Stainless Steel Double Ribbon Mixer Blender, 30" W x 78" L x 33" D, 10 HP, 440 V., 50 RPM
JM Industrial LLC | Millwood, WV
Category: Ribbon Mixers and Blenders
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: J.h. Day
Used JH Day Stainless Steel Double Ribbon Mixer Blender 35 Cu/Ft, Stainless steel blending chamber with a sanitary finish on internal surfaces., Blender is constructed with a carbon steel outer shell and a 304 stainless steel unitary lining., Blender Dimensions: 30"W X 78"L X 33"D, Sanitary mechanical ...more
35 cu.ft. J.H. Day, Stainless Steel double ribbon blender w/dimple jacketed trough
Perry Videx LLC | Hainesport, NJ
Category: Ribbon Mixers and Blenders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: J.h. Day
Used 35 cu.ft. J.H. Day stainless steel double ribbon blender with dimple jacketed trough. Trough is 30" wide x 78" long. Has center bottom outlet but no valve included. Has motor and gearbox. Currently mounted on stand supplying approximately 36" discharge height., J.H. DAY 35 Cu.Ft., Capacity. 35 ft, Material of ...more
36 cu.ft. J.H. Day #D-10, Stainless steel double ribbon blender, hinged flat top cover with gasket & swivel screw clamps, 10 HP
JM Industrial LLC | Millwood, WV
Category: Ribbon Mixers and Blenders
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: J.h. Day
Used JH Day Stainless Steel Double Ribbon Blender 36 Cu/Ft - Model D-10, Serial No: 1460, 304 stainless steel material contact surfaces., Mixing chamber dimensions: 30" W X 78" L X 33" D., Blender shaft ends supported on pillow block bearings with stuffing box rotary seals., Hinged flat top cover with ...more
JUST ADDED!
80 cu.ft. J.h. Day, Stainless steel ribbon blender, 96" x 36" x 40" ID tank, 15 HP, 230/460 V.
Equipment Recovery Corp | Willoughby, OH
Category: Ribbon Mixers and Blenders
Seller: Equipment Recovery Corp
Location: Willoughby, OH
Mfr: J.h. Day
JUST ADDED!
80 cu.ft. J.h. Day, Stainless steel ribbon blender, 96" x 36" x 40" ID tank, 6" discharge
Equipment Recovery Corp | Willoughby, OH
Category: Ribbon Mixers and Blenders
Seller: Equipment Recovery Corp
Location: Willoughby, OH
Mfr: J.h. Day
100 cu.ft. J.h. Day, Double Ribbon Blender, Stainless Steel, 230-460 V., 20 HP, 55 RPM
Aaron Equipment Co | Schaumburg, IL
Category: Ribbon Mixers and Blenders
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: J.h. Day
used- jh day approximately 100 cubic foot stainless steel double ribbon blender. 40" wide x 120" long x 48" deep. 8" center bottom discharge. stainless steel covers. driven by a 20hp 3/60 230/460volt 1760 rpm motor with stober drive reducer 32.1:1 ratio.
120 cu.ft. J.h. Day, Stainless steel double ribbon mixer, 20/15 HP
Machinery & Equipment Co | Brisbane, CA
Category: Ribbon Mixers and Blenders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: J.h. Day
Day Mixing 120 cubic feet stainless steel double ribbon mixer. Trough measures 10' Long x 44" Wide x 54" Deep. Constructed of stainless steel and previously used in a chemical application. s a new TECO-Westinghouse MAX-PE Severe Duty Motor on the gearbox, rated at 20/15 HP, 230/460V, 46.9/23.5A, and operating at ...more
JUST ADDED!
135 cu.ft. J.H. Day, Stainless Steel Double Spiral Ribbon Blender, top cover, 30 HP explosion proof motor
Global Equipment International | Chalfont, PA
Category: Ribbon Mixers and Blenders
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: J.h. Day
J.H. Day Stainless Steel Double Spiral Ribbon Blender, Approximate 135 Cubic Feet, Serial# 85051. With top cover, (2) bag dump stations, 30hp XP motor & reducer, center bottom outlet with valve..
140 cu.ft. J.H. Day, Stainless Steel jacketed double ribbon blenders, 40 HP chain driven motor
Perry Videx LLC | Hainesport, NJ
Category: Ribbon Mixers and Blenders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: J.h. Day
Used 140 Cu. Ft. JH Day Steel Jacketed Double Ribbon Blender. Chain driven by a 60 hp motor. Gearbox ratio 25.6/1. Has center bottom outlet. Mounted on stand supplying approximately 3 foot discharge height., J.H. DAY 140 CU. FT., Capacity. 140 ft, Material of construction. Steel, Horsepower. 60 hp, Jacket. Yes.
250 cu.ft. J.H. Day, double ribbon mixer, 304 Stainless Steel contact parts, flip up cover, interlock safety guarding
Frain Industries | Carol Stream, IL
Category: Ribbon Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: J.h. Day
J H Day, 250 ft³ total and 220 ft³ working capacity, double ribbon mixer with amount of product per hour – depending on materials and application. 304 stainless steel contact parts. Inner mixing chamber dimensions: 123" in Length; 60" in Width; 65" in Depth. flip up cover, stainless ...more
Day, Ribbon Blender, 1.5 HP, 220/440 V
HGR24 | Euclid, OH
Category: Ribbon Mixers and Blenders
Seller: HGR24
Location: Euclid, OH
Mfr: J.h. Day
Inventory No. 0822-213-0005 Name 5 Cu Ft Day Ribbon Blender, C/s Arrival Date 08-23-2022 Dimensions L x W x H (inches) Unavailable Weight (lb.) 1 Category Chemical Processing Condition Used, tested Available Quantity 1.
