25 Results
Baker #A, Band Resaw, 6" cut H x unlimited L, 7" x 7" material, 120 FPM, 28" wheel diameter, 13'-2" L x 1" or 1-1/4" width x 0.035" blade, 20 HP, 2026, new
Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: A
Year: 2026
BAKER A Band Resaw 1/4" to 6" (6 mm-152 mm) cutting height x unlimited lengths; accepts up to 7" x 7" max. incoming material with conveyor set at zero degrees.: -- Fully variable feed speeds from 0 to 120 FPM and controlled by a hydraulic flow control valve; feed speeds relative to width of cut and hardness of ...more
Baker #A, Horizozntal Band Re-saw, w/Slide return, 7" x 7" timber capacity, 120 FPM, 6" width, 20 HP, 28" diameter band wheel, 2026, new
Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: A
Year: 2026
BAKER - A,.Single-Head Resaw w/Hydraulic Powered Return - 6" x 12" Cut Cap.: -- Max. 6" Wide x 12" Tall timber cap. (with conveyor set at zero) w/Slide Return (photo shows powered return); hydraulic variable feed speed rate 0 - 120 FPM 6";-wide, hydraulically-driven powered conveyor with rough top belting. -- : -- 20 ...more
Baker #A, Single Head, Resaw, 3ph, 20 HP TEFC, 6" conveyor, NEMA 12 panel, 240/480 V., New
RT Machine | Hughesville, PA
Category: Resaw Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Baker
Model: A
Baker Model A Single Head Resaw, 3 PH 20 HP TEFC Motor 6" Wide Conveyor with Rough-top Belting Tilting Feed Belt to 8 degrees Note: Manual Adjustment, No Indicator 240/480 volt/3phase/60 Hz Hydraulic Feed System with 10 Gallon Reservoir Flow Control Valve for Variable Feed Speed Filter & Shut Off Valve Idler ...more
Baker #ABX, Horizontal Re-Saw, 2019
Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: ABX
Year: 2019
- Number of heads: 1, - Guides: Baker Low-Profile Flat Guides with hardened tool steel guide plates with rear backup roller guide wheels, - Dust Output: 6"x6" (15.24cm x 15.24cm) square outlet with a 90° adapter chute with a 4" (10.2 cm) diameter outlet, which can be rotated to serve four directions of discharge. ...more
Baker #ABX, Single Head Resaw, 12" x 12", 30 HP, TEFC, NEMA 12 panel, 95 FPM, New
RT Machine | Hughesville, PA
Category: Resaw Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Baker
Model: ABX
Baker Model ABX Single Head Resaw Capacity 12" x 12" 28" Precision Machined Band Wheels 30HP Totally Enclosed Fan Cooled Motor Complete Hydraulic Feed System with a 10 Gallon Reservoir, Flow Control Valve for Variable Feed Speed,Filter,& Remote Feed Shut Off Powered Infeed Hold Down NEMA 12 Electrical Panel with ...more
Get email updates for newly added Resaw Band Saws
Resaw bandsaws are built for precise, efficient resizing of wood boards, ideal for lumber production and woodworking. They include single- and multi-head models for customized cuts, allowing quick board thinning and sectioning. Many feature adjustable feed rates, hydraulic controls, and blade tensioning, ensuring consistent, high-quality cuts across various timber sizes.
Baker #ABX, single-head horizontal resaw, 12" x12" capacity, .035" x 1" x 14' 2" blade, 2025, new
Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: ABX
Year: 2026
BAKER ABX Single-head Horizontal Resaw The Baker "ABX" Band Resaws are designed to save space but give you the same great s of larger band resaws.: -- 12" x 12" Cut cap.; 28" precision machined wheels and 30 HP TEFC motor for main drive (40 HP optional); 2 HP hydraulic feed system with a 10-gallon reservoir, flow ...more
Baker #ABXX, Band Resaw, 12" H x 16" width timber, 95 FPM, 40 HP, 28" diameter band wheel, 14'-10" x 1" x 0.035" saw blade, 2026, new
Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: ABXX
Year: 2026
BAKER ABXX Single-Head Resaw, 12" x 16" Cut Cap: Single-Head Band Resaw can be used to cut boards, cants, or reclaim slabs, This Resaw can process a Timber up to 12" H x 16 W" in any desired length. Hydraulic variable speed from 0 - 95 FPM. -- This Model "ABXX" Resaw covers a large range of applications from small to ...more
Baker #ABXX, Single Head Resaw, 16" x 12", 40 HP, NEMA 12 panel, 95 FPM, pedestal, New
RT Machine | Hughesville, PA
Category: Resaw Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Baker
Model: ABXX
Baker Model ABXX Single Head Resaw, 3PH Accepts Material 16" wide by 12" high 28" Precision Machined Band Wheels 40hp Totally Enclosed Fan Cooled Motor Complete Hydraulic Feed System with a 10 Gallon Reservoir Flow Control Valve for Variable Feed Speed, Filter, & Remote Feed Shut Off Powered Infeed Hold Down Nema ...more
Baker #AX, Single Head Resaw, 12" x 12", 120 FPM, 30 HP, TEFC, New
RT Machine | Hughesville, PA
Category: Resaw Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Baker
Model: AX
Baker Model AX Single Head Resaw 30-HP TEFC electric motor standard 12" wide hydraulically-power driven conveyor with roughtop belting 28" diameter, CNC-machined, dynamically-balanced, solid, all-steel band wheels 14'-2"x1"x0.035" or 14'-2"x1"x0.035" hardback band blades Baker's Exclusive Low-Profile Flat ...more
Baker #B2 Head Resaw, Diesel, Electric Start
Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: B2
Baker Model B 2 Head Resaw, Diesel, Electric Start.
JUST ADDED!
Baker #BBR-0, horizontal band resaw with powered return, single head, 20 HP TEFC motor
Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: BBR-0
BAKER BBR-O Horizontal Band Resaw w/Powered ReturnBaker Single Head Re-Saw with 6" wide x 12" high cap.;: -- 1/4" - 4" Cutting height; 20 HP TEFC saw motor. -- 28" CNC machined dynamically balanced all steel band wheels. Spring blade tensioning system. Feed System: -- Powered infeed belt tilts 0 - 10, variable speed ...more
Baker #BBR-0, Band Resaw With Return Conveyor
Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: BBR-0
Baker Band Resaw BBR-O, Return Conveyor, Per the seller: The machine is in working order, it had a recent overhaul. We replaced the guide blocks, hold over wheels, and upgraded the wheels to support blades up to 2" wide. It is not currently connected, and is available for inspection., Wired for 240V, The return ...more
Baker #BBR-0, Single Head Resaw, 20 HP, w/ hydraulic belt return, 1994
Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: BBR-0
Year: 1994
1994 Baker BBR-0 Single Head Resaw, Hydraulic Belt Return, 20hp Motor.
Baker #BBR-O, Single Head Resaw, 12" capacity, 25 HP, 460 V., 1993
Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: BBR-O
Year: 1993
12" capacity, 25HP motor, 460 volt 3-phase.
Baker #BPQ-0, Horizontal Resaw, Good Working Condition
Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: BPQ-0
Baker PAQ Resaw, Good Working Condition.
Baker #BX, 2-Head Resaw Band Saw, 12" x 12" cut capacity, 30 HP, 28" diameter band wheel, 120 FPM, 12" width, 14'-2" x 1-1/2" x 0.035" blade (not included), 2026, new
Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: BX
Year: 2026
BAKER BX 2-Head Resaw w/12" x 12" Cut Cap. : -- 30 HP TEFC motor, hydraulically driven feed from head motor, 28"; dia. CNC-machined, dynamically balanced, all-steel bandwheels; variable feed speed from 20 - 120 FPM, feed works with 12" wide rough top belt conveyor on self-centering rollers, and holddown wheel. -- ...more
Baker #C, Single Head Resaw, 240V 3ph, 2021
Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: C
Year: 2021
Baker Model C Resaw, 240V 3ph, Baker Cant Turnaround Included, Good Running Condition.
Baker #C, Five Head Resaw, 20 HP, TEFC, NEMA panel, New
RT Machine | Hughesville, PA
Category: Resaw Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Baker
Model: C
Baker Five Head "C" Model Band Resaw Increase production and profits, while also reducing operating cost with the world famous Baker Muiti-Head Band Resaws. 40:1 Manual Head Raise & Lower System 28" Precision Machined Band Wheels 20HP Totally Enclosed Fan Cooled Motors 7.5HP Stand Alone Hydraulic System with the ...more
Baker #C-2-Head, multi-head resaw, 2022 (2 available)
Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: C-2-HEAD
Year: 2022
Baker Model C 2-Head Resaw, One machine has been sold. One is still available., Never put into production!.
Baker #C-4-Head, Multi-head Resaw, 6" width x 12" H capacity, 12" width, 13'-2" x 1-1/4" x 0.035" blade, 28" diameter band wheel, (4) 20 HP, 120 FPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: C-4-HEAD
Year: 2026
BAKER C 4-HEAD Horizontal Resaw w/Powered Return6" Wide x 12" high cap. Resaw; standard spring blade tensioning system;: -- 13'-2" x 1-1/4" x 0.035 blade provides thin kerf savings; quick & easy blade height adjustments. -- Wheels: 28" Dia. CNC machined, dynamically balanced, all-steel band wheels, (4) bolt ...more
JUST ADDED!
Baker #CX, 2-head 12" Horizontal Resaw, 30 HP, 120 FOM, 2018
Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: CX
Year: 2018
12@x12” Capacity, 30 HP Motors, 20-120 FOM hydraulic feed.
Baker #CX, Horizozntal Band Resaw, 12" H x 12" width, 120 FPM, 30 HP, 28" diameter band wheel, 14'-2" x 1" x 0.035" blade, 2026, new
Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: CX
Year: 2026
BAKER CX Resaw & s: -- Single-Head Band Resaw can be used to cut boards, cants, or reclaim slabs. Can process a Timber up to 12" H x 12 W" in any desired length. Hydraulic variable speed from 0 - 120 FPM. -- Covers a large range of applications from small to large facilities, they are simple to operate and ...more
Baker #CX, Resaw w/Return, 5-head, 30 HP, unscrambler, transfer conveyor, 2024
Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: CX
Year: 2024
2024 Baker 5-Head "CX" Resaw, 30 HP Motors, Hydraulic infeed with return conveyors, Blade Drip System, Infeed Turnaround with live head, 24" x 26' Flattop transfer conveyor, Baker 2 strand Automated unscrambler with drive and controls.
Baker #PAQ, Single Head Band Resaw, 20 HP, TEFC, NEMA 12 enclosure, 1" x 13' 2" x 0.035" blade, 28" wheels, New
RT Machine | Hughesville, PA
Category: Resaw Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Baker
Model: PAQ
Baker Model P.A.Q. Single Head Band Resaw Baker single cut "PAQ" band resaw with return, electric complete with a totally enclosed fan cooled 20HP motor, Nema 12 enclosure, starter, motor overload protection and all is prewired. Machine also complete with a variable speed hydraulic feed system including the pump ...more
Baker #PAQ-II, Band Re-saw, 2-Head, 8" x 12" capacity, (2) 20 HP, 2026, new
Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: PAQ-II
Year: 2026
BAKER PAQ II Band Re-Saw. -- 2-Head Re-Saw, 8" x 12" cap., (2) 20 HP motors. -- : BAKER Octaguide System, moveable sawheads, stationary conveyor belt, rough top belting and infeed hold down wheel. -- (2) Main drive 20 HP motors. -- Options available at extra charge: Powered hold-down, BAKER Quik-Sharp band blade ...more
