go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Schenk Pressure Leaf Filters

warning
7 Results

24 sq.ft. Schenk Votator #SN-LSK-10-10, Pressure Leaf Filter, 30" diameter x 12" Vertical Tank, (7) 24" diameter Horizontal Leaves, 90 psi @ 300°F, 5 HP, 220-440 V

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Schenk
Model: SN LSK-10-10
Used Schenk/Votator stainless steel pressure leaf filter, approximately 30" diameter X 12" vertical tank, (7) 24" diameter horizontal leaves, rated 90 psi @ 300F, 5 HP/3/60/220-440/1730 XP drive, with right angle drive, with shaft entering through bottom center unit has entering manifold, bolt on cover with swing ...more

120 sq.ft. Schenk, Centrifugal Pressure Leaf Filter, (23) 32" diameter Plates, 265 gallon vessel, 12" diameter Solids drain, 7.5" center-bottom liquids drain, 100 psi @ -4 F to 300 F

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Schenk
Centrifugal Pressure Leaf Filter, manufactured by Schenk, type ZHF-R15/10 KLK. Unit has twenty-three (23) plates measuring 32" diameter for a total cake capacity of approximately 120 square feet. Includes 265 gallon 316L stainless steel vessel rated for full vacuum and 100 PSI @ -4 deg. F. to 300 deg. F. Vessel is ...more

266 sq.ft. Schenk #ZFG-SR3.5/23/KL, Stainless Steel Rotating Leaf Pressure Filter, Centrifugal Discharge, Vertical Tank, Horizontal Leaf, 75 psi @ 212°F Internal

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Schenk
Model: ZFG-SR3.5/23/KL
Used Schenk model ZFG-SR3.5/23/KL stainless steel rotating leaf centrifugal discharge pressure filter. Rated approximately 266 square foot (24.73 meters square) filtration surface area, stainless steel internals. Carbon steel vessel approximately 48" internal diameter X 42" straight side, bolted dished top, welded ...more

323 sq.ft. Schenk, Stainless Steel filter, 85 psi @ 300°F, 37 KW motor, 415 V., 1987

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Schenk
Year: 1987
Used Approximately 323 Square Foot (30 Square Meter) Stainless Steel Schenk Filter, Manufacturer: Schenk, Year: 1987, Internal rated 85 psi @ 300F, 316L stainless steel contacts, Driven by a 37 kw motor, 415 volt, 50 cycle with hydro piston pump PU100 drive with speed controller, 1987 SCHENK 323 Square Foot.

343.9 sq.ft. Schenk #ZHFSR30-25KLK-B2, Filter, Hastelloy C22, legs, 1999

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Schenk
Model: ZHFSR30-25KLK-B2
Year: 1999
Used Schenk filter, model ZHFSR30-25KLK-B2, hastelloy c22 product contact surfaces, 31.95 sq meter surface area, 1.8 cu meter cake capacity, 528 gal, rated 100 psi and full vacuum at 302 f internal, jacketed for 100 psi and full vacuum at 302 f, with (45).985 mm diameter plates, on legs, vessel certified by Four Corp ...more

Get email updates for newly added Pressure Leaf Filters

Plate and frame filter presses (also known as membrane filter presses) separate solids from liquids in slurries via pressure filtration. The slurry passes through filter plates and frames with filter media, leaving solids as a "cake" and releasing liquid as filtrate. Common in industries like mining, wastewater treatment, and chemicals, these presses handle high-solid content and produce clear filtrate.

Schenk Votator #2HF-SR-10-KL, Pressure Leaf Filter

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Schenk
Model: 2HF-SR-10-KL
Used Schenk Votator model 2HF-SR-10-KL. Electric motor. Falk gear., SCHENK 2HF-SR-10-KL.

Schenk #ZHF-SR-10-KL, centrifugal discharge pressure filter, Stainless Steel, 75 psi @ 212°F, bolt on bottom head, on legs, #20918

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Schenk
Model: ZHF-SR-10-KL
Used Schenk Centrifugal Discharge Pressure Filter, Model ZHF-SR-10-KL, stainless steel construction, 9.87 sq. meter surface area,.3 cu. liter cake capacity, rated 75 PSI at 212 degrees F internal, bolt on bottom head, 805 MM diameter plates with 30 MM spacing, on legs with approx. 10 H.P. motor drive, Chamber Serial ...more