6 Results
9" x 10" Acra #27AFL, second operation toolmakers lathe, Lever 5C Collet closer, 4000 RPM, 1 HP, new, #SM27AFL
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Precision and Second Operation Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: 27AFL
Spindle Capacity w/ Chuck 5" Spindle w/ Expanding Collets 3" Spindle w/ Round 5C Collets 1-1/16" Spindle w/ Hexagon 5C Collets 7/8" Spindle w/ Square 5C Collets 3/4" Spindle w/ Step Chucks 1-1/16" - 6" Spindle Nose Diameter 2-3/16" Spindle Nose 5C (10 Degrees)/4 Degree x Taper Spindle RPM (Variable) 0 - 4000 RPM ...more
9" x 15" Acra #ATS-27-EVS, Super Precision Ground Operation Lathe, 6" Chuck, 2.2" Spindle Nose diameter, 1.25" Hole thru Spindle, 3 HP, 4000 RPM, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Precision and Second Operation Lathes
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Acra
Model: ATS-27-EVS
Acra 9″ x 15″ Super Precision Ground Operation Lathe, ATS-27 EVS, Inventory # 3040, Model: ATS-27 EVS, Series: 27, Spindle Capacity:, with Chuck: 6″, with Expanding Collets: 3″, with Round 5C Collets: 1 1/16″, with Hexagon 5C Collets: 7/8″, with Square 5C Collets: 3/4″, with ...more
11" x 18" Acra #ATL-618EVS, precision engine lathe, 2-3/16" spindle diameter, tool holder
Sterling Machinery Exchange | South El Monte, CA
Category: Precision and Second Operation Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Acra
Model: ATL-618EVS
Swing Over Bed 11" Distance Between Centers 18" Spindle Nose Diameter 2-3/16" Spindle Nose 5C (10º) / 4º x Taper Spindle RPM 5 HP Spindle Motor 1-1/4".
11" x 18" ACRA #ATL618E, precision lathe, 3 HP, 4000 RPM, 6" swing over cross slide, 1-1/4" bore, 28 holders, quick change, digital read out, inch/metric thread, 2006
Myers Technology Co LLC | Elk Grove Village, IL
Category: Precision and Second Operation Lathes
Seller: Myers Technology Co LLC
Location: Elk Grove Village, IL
Mfr: Acra
Model: ATL618E
Year: 2006
Precision Tool room lathe with built in DRO and electronic threading in inch and metric, S:, Series: ATL618E, Swing Over Bed: 11", Swing Over Cross Slide: 6", Spindle Speed: 150 ~ 4,000 rpm, Spindle Nose: 5C (10 degree)/4-degree Taper, Hole Thru Spindle: 1-1/4, Main Motor: 3 HP, Voltage: 230V AC/1PH/3PH, Dimensions: ...more
32"/44" x 80" Acra #SET3280, precision engine lathe, 20" 3-Jaw chuck, 4-way tool post, #5MT, 25 HP, new, #SMSET3280
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Precision and Second Operation Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: SET3280
Capacity 32"/44" x 80" Swing Over Bed 32" Swing Over Cross Slide 23" Swing in Gap 44" Distance Between Centers 80" Bed Width 18" Spindle Nose A2-11 Spindle Bore 6" Taper of Spindle MT #5 Spindle Speeds - Range 15 ~ 1000 RPM Spindle Drive Motor 25 H.P. Voltage 220/440V ~ 3 Phase WEIGHT 13,000 Lbs. s 4 Way Tool Post ...more
Get email updates for newly added Precision and Second Operation Lathes
Precision lathes are high-accuracy machines used for fine, detailed work requiring tight tolerances and smooth finishes, often in industries like aerospace and watchmaking. Second operation lathes, also known as capstan or turret lathes, are used in mass production to perform additional machining tasks on already partially machined parts, allowing for efficient and repetitive operations without extensive retooling.
9" Acra #ATL-27-EVS, Second Operation Toolmakers Lathe, 6" Chuck, 2.2" Spindle Nose diameter, 3.75" Cross Slide Travel, 1.25" Hole thru Spindle, 3 HP, 4000 RPM, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Precision and Second Operation Lathes
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Acra
Model: ATL-27-EVS
Acra 9″ Swing Second Operation Toolmakers Lathe, ATL-27 EVS, Inventory # 3041, Model: ATL 27 EVS, Series: 27, Spindle Capacity:, with Chuck: 6″, with Expaning Collets: 3″, with Round 5C Collets: 1 1/16″, with Hexagon 5C Collets: 7/8″, with Square 5C Collets: 3/4″, with Step Chucks: ...more
