26 Results
AMFEC #510, American Food Equip., Paste Mixer, 41" L x 30-1/2" W x 21-1/2" D ID, 2 HP
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Amfec
Model: 510
Amfec, Model 510, 6 ft³ (4 ft³ working capacity), 304 stainless steel dual trough paddle mixer with pounds of product per hour – depending on materials and application. Dual mixing troughs with inner dimensions of: 26" in Length; 20" in Width; 20" in Depth. pneumatic lift up safety ...more
AMFEC #510, American Food Equip., Paste Mixer, 41" L x 30-1/2" W x 21-1/2" D ID, 2 HP
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Amfec
Model: 510
Amfec, Model 510, 14 ft³ (10 ft³ working capacity), 304 stainless steel dual trough paddle mixer with pounds of product per hour – depending on materials and application. Dual mixing troughs with inner dimensions of: 41" in Length; 30½" in Width; 21½" in Depth. dual flip up ...more
Collette #GRAL-10, Vert Paste Mixer, 0.25 cu.ft., 304 Stainless Steel, 9.5" diameter x 7" H, 1.84 gallon, granulating & high shear agitation, on casters
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Collette
Model: GRAL-10
Collete, model GRAL-10, 0.25 ft³, high shear, 304 stainless steel, low pressure jacket, removable vessel, high shear, verticle granulator. Vessel dimensions: 9½" diameter x 7" deep, 7 liter / 1.84 gal working capacity ( 10 liter / 2.64 gal total capacity). granulating agitation powered by a 2 hp ...more
Collette #GRAL25, high speed, high shear 316L Stainless Steel contact parts, low pressure jacket, removable single pot granulator
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Collette
Model: GRAL25
Collette Model GRAL 25, High speed, high shear 316 stainless steel, low pressure jacket, removable single pot granualtor. Gross capacity of 27 liters (7.13 gallons) and working capacity of 25 liters (6.6 gallons) per batch. Vessel dimensions: 14½" ID x 10" Deep. pneumatic lift up top cover, 13" ...more
Collette #GRAL75, vari-speed agitation, dual speed high shear, 316 Stainless Steel, jacketed, removable vessel granualtor
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Collette
Model: GRAL75
Collette Model GRAL 75, High speed, high shear 316 stainless steel, jacketed, removable vessel granualtor. Gross capacity of 75 liters (19.81 gallons) and working capacity of 60 liters (15.85 gallons) per batch. Vessel dimensions: 20½" ID x 15" Deep. Hydraulic lift up top cover, 16" diameter (3) ...more
Get email updates for newly added Paste Mixers and Blenders
Paste Mixers and Blenders (also known as paste blending machines) are used to combine thick, viscous materials like pastes, adhesives, and slurries to achieve a uniform consistency. Commonly used in industries like food processing, pharmaceuticals, and chemicals, they are ideal for mixing ingredients that require controlled blending for optimal texture and performance. These mixers are essential for ensuring high-quality, consistent results in paste production.
Cornell #D8, variable speed Versator, rated from 1/2 - 2 GPM and disc rotation from 2000-6000 RPM
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Cornell
Model: D-8
Cornell, Model D-8, Variable speed "Versator". Rated from ½ to 2 gallons per minute and disc rotation from 2000 to 6000 rpm – depending on materials and application. 6" diameter disc and has ¾" ID / 1" OD Tri-Clamp product in / outlet, top vacuum port, and bottom drain. ...more
Cornell #D16, vari-speed Versator 1-20 gpm, 16" ID disc, 1200-3220 RPM, (2) 2" NPT infeed & discharge product ports, 5 HP
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Cornell
Model: D16
Cornell, Model D16, Variable speed "Versator" rated from 1 to 20 gallons per minute – depending on materials, application and machine configuration. 16" ID disc, rotation rated from 1200 to 3220 rpm, with (2) 2" NPT side chamber in feed and discharge product ports, (1) 2" NPT top vacuum ...more
Cornell #D26 Versator, horizontal paste mixer, 5-125 gallons of product per minute, all Stainless Steel contact parts (2 available)
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Cornell
Model: D26
Cornell Model D26 "Versator" rated from 5 to 125 gallons of product per minute – depending on materials and application. All stainless steel contact parts. 26" ID product rotating disc, with (2) 2-1/2" OD / 2-1/4 ID side chamber in feed and discharge product ports, (1) 3-1/4" OD / ...more
Fryma #VME700, 700 liter 304 Stainless Steel processing vessel, fully jacketed, dome top with lock down cover & pneumatic lift, dish bottom, center bottom dischrage
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Fryma
Model: VME700
700 Liter, 304 stainless steel processing vessel. Fully jacketed, Jacket rated to 45 psi and vacuum rated. Three independent mixing / blending devices: side wall scraper, high shear disperser and an adjustable homogenizer / colloid mixer. Dome top with lock down cover and pneumatic lift, 9" diameter port ...more
Goodway #CM25, horizontal paste, continuous aerating mixing system, jacketed mix chamber, mounted on casters
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Goodway
Model: CM25
Continuous aerating mixing system capable of up to 800 pounds per hour. 1-1/2" tri-clamp inlet/outlet, jacketed mix chamber and a Waukesha positive displacement pump. Mounted on casters., OAD: 64" (L) x 38" (W) x 50" (H).
Goodway #VBM-1000, 1000 lb. or 120 gallon capacity, Stainless Steel slurry mixer and transfer system
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Goodway
Model: VBM-1000
Goodway Model 1000 lb or 120 gallon capacity, stainless steel, slurry mixer and transfer system, with number of pound or gallons of product per hour – depending on materials and application. 36" OD x 38 Deep, stainless steel, single wall, flat top mixing tank with 2 piece flip top, quick release clamps bolt ...more
Hottman #MJ4, 25 cu.ft. 185 gallon Carbon Steel dual shaft single ribbon horizontal paste mixer, hand crank slide gate bottom discharge
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Hottman
Model: MJ4
25 cuft (185 gal) carbon steel dual shaft single ribbon horizontal paste mixer with 72"L x 33"W x 18"depth jacketed mixing chamber with a running capacity of 24.75 cu ft (185 gal). Unit has 2 1/2" dia shaft with 2"L x 3/4"W ribbons. Unit has hand wheel controls for dumping or raising the ...more
J H Day #Nauta-MBX-525, 52.5 cu.ft. 392 gallon 304 Stainless Steel single wall vertical paste mixer, 10 HP Reliance motor
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: J H Day
Model: NAUTA-MBX-525
J H Day Model NAUTA MBX 525, 52.5 cu. ft. (392 gallon), 304 stainless steel, single wall, vertical paste mixer with a 12" diameter bottom support screw. s three distinct intermixing actions: the screw turning on its axis, the screw orbiting the tank, and the screw spiralling the material upward. three 6" ...more
Komline Sanderson #B6D84, 3 cu.ft. 316 Stainless Steel horizontal mixer, dryer, heater, cooler, 96" L x 12" W x 17" D mixing chamber, full jacket, hollow shafts & paddles
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Komline Sanderson
Model: B6D84
3 cu ft, 316 stainless steel, horizontal, mixer, dryer, heater, cooler with volumes per hour – depending on materials and application. 96" Long x 12" Wide x 17" Deep mixing chamber with 4" OD x 96" Long dual counter rotating stainless steel hollow shafts with hollow intermeshing paddles. ...more
Mepaco #TBD170, Horiz Paste Mixer, 316 Stainless Steel, dual trough, 33" width x 53" L x 24" D, 8" straight wall, 90 PSI @ 375°F jacket, 750 PPH, 16" diameter x 1.5" x 0.33" ribbons, AB PLC Control
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Mepaco
Model: TBD170
Mepaco, Model TBD170, 316 stainless steel, dual trough, jacketed, ribbon mixer. Capacity: 23ft³ (15 ft³ working) (750 Lbs.) Pounds of product per hour – depending on materials and application. Dual Trough dimensions: 53" in Length; 33" in Width; 24" in Depth; 8" Straight Wall. lift ...more
Oakes #14MC10, horizontal paste mixer, Stainless Steel continuous rotor stator pin mill mixer, 4000 lbs./hour, mounted on 4 leg base
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Oakes
Model: 14MC10
Oakes stainless steel, continuous rotor stator pin mill mixer rated up to 4000 lb per hour – depending on materials, application and machines configuration. 14" outside diameter mixing head and 2" outside diameter threaded center product port, 10 hp rotary motor and a 3/4 hp pump with a variable speed ...more
Pasco, horizontal paste mixer, 45 cu.ft. 316 Stainless Steel double ribbon mixer, 48" L x 39-1/2" W x 47" D chamber, bottom discharge with butterfly closure
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Pasco
45 Cubic Feet total and 35 cubic foot working capacity, 316 S/S, double ribbon mixer. : 48”L x 39 1/2"”W x 47”D chamber, double ribbon on 48"L x 3/4" diameter shaft. Ribbon has outer ribbon 1/4" thickness and 2" W inner ribbon 1/4" thickness and 2" W, 2 7/8" ...more
Pasco, horizontal paste mixer, 45 cu.ft. 316 Stainless Steel jacketed qdouble ribbon mixer, 48" L x 39-1/2" W x 47" D chamber, bottom discharge with butterfly closure
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Pasco
45 Cubic Feet total and 35 cubic foot working capacity. 316 S/S, jacketed, double ribbon mixer. : 48”L x 39 1/2"”W x 47”D mixing chamber, double mixing ribbon on 48"(1219mm)L x 2 3/4"(70mm) diameter shaft. Ribbon has (outer ribbon 1/4"(6mm) thickness and 2"(50mm)W ) (inner ...more
Peerless #DA50K-20, double Arm Paste Mixer, Kleanview open frame, 450 lbs, 79.2 gallon, 304 Stainless Steel, 230 PSI @ 180°F jacketed, 36" width x 33" D x 28" L ID, AB PLC Control
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Peerless
Model: DA50K-20
Peerless, model DA50K-20, Kleanview open frame, 450 lbs, 79.2 gallon, 304 S/S, jacketed, double arm sigma mixer with amount of product per hour – depending on materials and application. Mixing vessel internal dimensions: 28" long x 36" wide x 33" deep, working capacity of 10.6 ft³ (17.4 ...more
Ross #HSM-40, 40 gallon, double helical, industrial mixer, vacuum jacketed, pressure rates, 800000 CP
Archem Process Equipment Ltd | Matheson, ON
Category: Paste Mixers and Blenders
Seller: Archem Process Equipment Ltd
Location: London, ON
Mfr: Ross
Model: HSM-40
Used Ross HSM-40 Vacuum Double Helical Mixer Reactor, USED ROSS APPROX. 40-GALLON VACUUM DOUBLE HELICAL MIXER REACTOR. THIS UNIT WILL MIX MOST THINGS THAT A DOUBLE PLANETARY MIXER WILL MIX AND IN MANY CASES BETTER AND FASTER. UNIT HAS AIR/OIL LIFT MECHANISM TO RAISE AND LOWER THE DRIVE TO ALLOW THE REMOVAL OF THE MIX ...more
Ross #PDM-2, Vertical Paste Mixer, 304 Stainless Steel, 9.5" diameter x 6.4" H Mix Bowl, blade & scraper, 0.75/.05 HP, on casters
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Ross
Model: PDM-2
Ross, Model PVM 2, 304 stainless steel, verticle mixer. Vessel is designed for vacuum up to 29.5"Hg and jacket is designed for 15 Psig. Working capacity of 1½ gallons and total capacity of 1.9 gallons. 9.5" diameter x 6.375" deep removable mixing bowl, powered lid lift, high shear emulsifier and ...more
Ross #PDM-4, Vertical Paste Mixer, 14" diameter X 8" D Mix Bowl, AB Control
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Ross
Model: PDM-4
Ross, Model PDM-4, vertical planetary mixer. a 14" diameter x 8" deep mixing bowl, pneumatic bowl lift, dispersing homogenizing blade, anchor mixing blade and scraper. Mounted on a painted frame base. Control panel with AB controls and touch screen HMI., OAD: 50"L x 45"W x 82"H.
Ross #PDM-4, Vertical Paste Mixer, 14" diameter X 8" D Mix Bowl, AB Control
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Ross
Model: PDM-4
Ross, Model PDM-4, vertical planetary mixer. a 14" diameter x 8" deep mixing bowl, pneumatic bowl lift, dispersing homogenizing blade, anchor mixing blade and scraper. Mounted on a painted frame base. Control panel with AB controls and touch screen HMI., OAD: 50"L x 45"W x 82"H.
Votator #CR-6, Stainless Steel jacketed paste mixer rated up to 65 cubic inches, continuous mixing, blending, dispersing and whipping
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Votator
Model: CR-6
Votator, Model CR-6, stainless steel jacketed paste mixer rated up to 65 cubic inches volume with gallons per minute – depending on materials, application and machine configuration. Continuous mixing, blending, dispersing and whipping. 5½" OD rotor, 1½" OD / 1" ID seated bevel style ...more
Votator #CR-16, 316 Stainless Steel jacketed paste mixer, 20 HP US Varidrive motor drive
Frain Industries | Carol Stream, IL
Category: Paste Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Votator
Model: CR-16
Votator Model CR-16, Has 16" OD, 316 stainless steel jacketed paste mixer rated up to 716 cubis inches of volume – depending on materials and application. Designed for continuous mixing, blending, dispersing and whipping. 16" OD rotor is a multi-vaned impeller sandwiched between (2) discs which ...more
Tank Paste Mixer w/Nord Gear Reducer, carbon steel, 16" diameter Blades, 230.83:1 Ratio, 1 HP, 71 RPM Out, 230/460 V
Cooper Industries Llc | Millwood, WV
Category: Paste Mixers and Blenders
Seller: Cooper Industries Llc
Location: Millwood, WV
ITEM 2872: 1 HP TANK PASTE MIXER WITH NORD GEAR REDUCER, OUTPUT SPEED: 71 RPM, 230.83:1 RATIO GEARBOX, 16” DIAM MIXER BLADES, CARBON STEEL CONSTRUCTION, UNUSED, PRICE, FOB HAW RIVER, NC………… $ 3,250.00.
