15 Results
Andritz #CPF1000, twin wire belt dewatering sludge press, 42" wide belt
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz
Model: CPF1000
109125.007 One (1) used Andritz twin wire belt dewatering press Belt: 42" Wide Steel Frame CPF 1000 see attached PDF from Andritz, 42" Wide.
JUST ADDED!
Andritz #DP350-650, Detrasher Pump, 25.5" rotor diameter, 14" delivery & reject nozzles, 3,960 GPM, 2020
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz
Model: DP350-650
Year: 2020
110680, Used Andritz Model DP350-650 detrashing pump, Rotor/Impeller Diameter: The rotor has a 25.5" diameter., Motor Power: This specific model is often paired with a 100 hp drive motor., Nozzle Diameter: It s a 14" diameter delivery, and a 14" diameter reject nozzle., Material: It is typically constructed from ...more
Andritz #DP350-650, Detrasher Pump, 25.5" rotor diameter, 3960 GPM, 100 HP, 2020
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz
Model: DP350-650
Year: 2020
110537, Used Andritz Model DP350-650, Detrasher pump., Key, - Design Capacity: Up to 3,960 gal/min (or approximately 5,000 m/h, a typical maximum for the DP series)., - Rotor/Impeller Diameter: The rotor has a 25.5" diameter., - Motor Power: This specific model is often paired with a 100 hp drive motor., - Nozzle ...more
Andritz #Fiberblow, Stainless Steel drum pulper w/sand separator, 500 KW ABB motor/drive, 2007
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz
Model: FIBERBLOW
Year: 2007
109552, 2007 ANDRITZ FIBERBLOW STAINLESS STEEL DRUM PULPER WITH SAND SEPARATOR. IT HAS A COMER SCREENEX DTRASHING SCREEN AND AUTOMATIC REJECT SYSTEM. THERE IS A MAGNECTIC SEPARATOR WITH AUTOMATIC WASTEPAPER SORTING AND DEBALING LINE. THE MOTOR DRIVE IS A 500KW ABB MOTOR/DRIVE..
Andritz #MS3, Micrascreen Stainless Steel, stationary pressure fed vertical screen suitable for separation of fine solids, fiber recovery, thickening & fractionation, 2019
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz
Model: MS3
Year: 2019
904464.003 PF, USED ANDRITZ MS3 MICRASCREEN, STAINLESS STEEL, STATIONARY, PRESSURE FED VERTICAL SCREEN SUITABLE FOR SEPARATION OF FINE SOLIDS, FIBRE RECOVERY, THICKENING AND FRACTIONATION, WITH (3) 27.55" X 70.85" PLATES WITH 120 DEG CURVATURE, 7-35.25 PSI FEED PRESSURE OPERATING RANGE, S/N 133152489.
Get email updates for newly added Paper and Pulp Mill Machinery
Paper and Pulp Mill Machinery (also known as papermaking equipment) includes machines and systems used in the production and processing of paper and pulp. Common equipment includes debarkers, digesters, paper machines, and refiners. Used in industries like packaging, printing, and paper manufacturing, these machines are essential for efficiently producing high-quality paper products from raw materials.
34" Andritz Ahlstrom #MDR2000H, Hot Disperger Kneader
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz
Model: MDR2000H
34" ANDRITZ AHLSTROM HOT DISPERGER KNEADER, MODEL MDR2000H.
Andritz #Moduscreen-TD2, 46.45" dia rotor, 36.25 psi, 100 HP, 283 RPM, 2019
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz
Model: MODUSCREEN-TD2
Year: 2019
109560, ANDRITZ TD2 MODUSCREEN, STAINLESS STEEL LIGHT AND SMALL HEAVY REJECT DETRASHER CENTRIFUAL SCREEN WITH 70.62 CU/FT CAPACITY, 46.45" DIAMETER ROTOR, 107.48" HEIGHT, 36.25 PSI MAX INTERNAL PRESSURE, ROTOR SPEEDS TO 283 RPM, 100 HP DRIVE MOTOR MODE EP100-12.
Andritz #No.4, Chip Meter, 2013
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz
Model: NO.4
Year: 2013
110535, Rebuilt Andritz Model No. 4, chip meter. Rebuilt by Andritz.
Andritz #RB300HD-1, high density cleaner, serial #P05800141012-425, 2006
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz
Model: RB300HD-1
Year: 2006
109859, Used Andritz Model RB300HD -1, High density cleaner, P0 5800141012-425, New 2006.
Andritz #RP1, continuous ragger, up to 17.5" rag diameter, up to 590" rag length, clock wise rotation, 2019
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz
Model: RP1
Year: 2019
904464 PF, USED ANDRITZ (2019) RP1C RAGPUL CONTINUOUS RAGGER WITH UP TO 17.5" MAX RAG DIAMETER HANDLING CAPACITY, UP TO 590" MAX RAG LENGTH HANDLING CAPACITY, CW ROTATION, SUITABLE FOR USE WITH UP TO 2,000 CU/FT CAPACITY PULPER, STEEL STAND MOUNTED, S/N 133152502, WITH THE FOLLOWING UNUSED SPARE PARTS, Pnuematic ...more
Andritz #S6P, CPF 2.8 meter belt filter press, 316L Stainless Steel wetted parts, 2001
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz
Model: S6P
Year: 2001
904723.094, Used Andritz CPF 2.8 meter S6P, belt filter press all wetted parts are, 316L SS with a " hot dipped" galvanized, carbon steel frame., Sludge Type: Primary, Throughput: 40-50 BDSPTD, Feed Consistency: 2.5 - 3 % TS, Hydraulic load: 267-333 GPM, Fiber content: 15% +, Ash content: 54%, Additional info upon ...more
Andritz #T2D, Moduscreen Stainless Steel, continuously operated sorter w/simultaneous screening, deflaking, fiber recovery & reject de-watering capability, 2019
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz
Model: T2D
Year: 2019
904464.002 PF, USED ANDRITZ (2019) FGO2 FIBREGUARD, STAINLESS STEEL CONTINUOUSLY OPERATED SORTER WITH SIMULTANEOUS SCREENING, DEFLAKING, FIBER RECOVERY AND REJECT DE-WATERING CAPABILITY, DESIGNED FOR RECYCLED FIBRE AND OCC APPLICATION, STEEL FRAME MOUNTED, BOTTOM DRIVEN WITH 100 HP DRIVE MOTOR, S/N 13315250.
Andritz, Wet Lap System & Baling Line, 165" width, 630-700 BDTPD, 2004
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz
Model: WET LAP
Year: 2004
110524, Used Andritz 4.2 meter (165") wet lap system Andritz bailing system. Capable of producing 630-700 BDTPD of bleached hardwood kraft pulp (BHK) paper grades. Designed to be used in paper production between the wet end and the dry end of the paper machine to mechanically remove water and consolidate the sheet ...more
Andritz, pulp flash drying system w/ fluffers, Air Tanks, Heating Element, 1987
Lenmark Industries | Langley, BC
Category: Paper and Pulp Mill Machinery
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Andritz
Year: 1987
SKU: 120576, Year: 1987, Condition: Used, Additional :, Includes:, - 2 x ANDRITZ HCM2 Fluffer, - Flash Drying Air Tanks, - Flash Dryer Heating Element, - All Fans, Motors and Control Panels.
Andritz, Pulp Flash Drying System w/ Fluffer, Air Tanks, Heating Element
Lenmark Industries | Langley, BC
Category: Paper and Pulp Mill Machinery
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Andritz
SKU: 120577, Condition: Used, Additional :, Includes:, - 1 x ANDRITZ HCM2 Fluffer, - Flash Drying Air Tanks, - Flash Dryer Heating Element, - All Fans, Motors and Control Panels.
