Molding Compression Transfer Presses in Michigan

DOUBLE-ACTING. (PRESS HAS 16" X 16" T-SLOTTED BED & SLIDE; HOWEVER, THERE IS 22" L TO R BETWEEN TIE RODS AND 9" F TO B BETWEEN TIE RODS). 39" DAYLIGHT WITH APPROX. 12" STROKE. 6.5 TON PULLBACK. 12.5 TON TRANSFER WITH 9" STROKE. 3" STROKE ON EJECTORS. 2.5" DIA. TIE RODS. 45" ...more

OVERALL PLATEN SIZE: 30" L to R X 17" F to B. DISTANCE BETWEEN POSTS: 23" L to R X 9" F to B. POST DIAMETER 2 ¾". MAIN RAM: 10" DIAMETER, SINGLE ACTING, RATED AT 2000 PSI, 1" NPT PORTS. STROKE APPROX 13". DAYLIGHT 25". FULLY GUIDED SLIDE WITH 8 ½" BUSHINGS. TWO ...more

36" L TO R OVERALL. 11" F TO B BETWEEN THE POSTS. THERE ARE TWO REMOVABLE STRIPPER BARS ON BED OF PRESS 18.5" APART. THE TOP PLATE (BELOW THE TRANSFER POT) IS 24" L TO R X 18.5" F TO B AND IS T-SLOTTED ALONG WITH THE BED. NOMINAL BED IS 30.5" X 20" (CROWN IS APPROX THE SAME IF TRANSFER POT ...more

I.M.I. INLAND MODEL A060 915. SERIAL #165. PRESS CAN BE OPERATED VERTICALLY OR HORIZONTALLY. TWO 12" X 12" X 2 3/8" ELECTRIC PLATENS (CARTRIDGE). 22" MAX. DAYLIGHT. 9 ½" DAYLIGHT WITH TRANSFER POT AND PLATENS INSTALLED. APPROX 9" STROKE ON MAIN CLAMP. APPROX 14" STROKE ON TRANSFER. ...more

PRESS HAS T-SLOTTED PLATES MOUNTED THAT RESULT IN 30" X 23" BED AREA. APPROX. 12" DIA. RAM WITH 16" STROKE; HOWEVER, STROKE IS LIMITED BY PUSH BACK CYLINDERS TO APPROX. 9" (3.25" BORE ON PUSH BACKS). TRANSFER CYLINDER HAS 4" DIA. ROD. 7" BORE AND 10" STROKE. DAYLIGHT OF 25.75" ...more

SERIAL #3935. NOMINAL PLATEN SIZE: 24" X 24". DISTANCE BETWEEN POSTS: 24 ¾" L to R X 14" F to B. 18" SINGLE ACTING MAIN RAM: RATED AT 2100 PSI, 1 ½" NPT PORTS, APPROX 16" STROKE. 41" DAYLIGHT. 3 ¾" POST DIAMETER. FULLY GUIDED MOVING BOLSTER WITH 6" LONG ...more