13 Results
50 lb. Anver vacuum lift with blower, hose & lift, 5 HP, equipped with a bin filter
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Anver
One (1) used Palamtic Vacuum Lifter 5 HP vacuum pump/blower, 3 phase, 460V only Approximately 40' of hose Lifting mechanism is 8" x 15" long and looks to be in good condition Last used for 50 lb. bags a bin filter 7' of 7" diameter hose 40' of 2" diameter hose.
95 lb. Anver #VB7HV-X11CD, Vacuum Hoist Lift, 5 HP, 230/460 Volts, 3 phase
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Anver
Model: VB7HV-X11CD
One (1) used Anver Vacuum Lift Model: VB7HV-X11CD Serial: 102312 5 hp, 230/460V, 3 phase 95 pound capacity UL tagged for hazardous locations.
225 lb. Anver VT-160, vacuum lift, 6.3" diameter, 8'-2" length, 12-gauge wire, 62" lift, 2022, new
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Anver
Year: 2024
ANVER VT 160 Vacuum Lift Ergonomic lift assist device designed for high production use. Vacuum lifting for panels in horizontal orientation to reduce potential injury to employees. Suitable for diverse loads such as sheets of particle board, plywood, glass, steel and plastic., Lifting capacity (using VB9HV-S Vacuum ...more
250 lb. Anver #VBT25M2-61-1220NBR, Vacuum Lift w/90 degree rotate, 2023, new
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Anver
Model: VBT25M2-61-1220N
Year: 2024
ANVER VBT25M2-61-1220NBR Vacuum Lift w/ 90 Degree Rotate, A new hoist-based vacuum lifter that s a high air flow and pneumatic powered tilting for handling building materials, composites, and textured surfaces. The ANVER VB Powered Lifter-Tilter is a hoist-operated vacuum lifter with pneumatic powered tilting for ...more
250 lb. Anver ETL-25M2-60, vacuum lift w/poweered tilt, (2) round suction pads, 10" diameter, 60" min beam length, 62" max spacing, 2022, new
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Anver
Year: 2024
ANVER ETL 25M2-60 Vacuum Lifter w/ Powered Tilt, Anver Vacuum Tilters and Upenders are loaded with safety s and have come to set the standard for safe tilting of loads. Each version has been revised over the years to perform better and last longer., The pads, vacuum generators, frame, controls, hardware, filters ...more
Get email updates for newly added Material Lifts - (Drum, Pallet, Vacuum)
250 lb. Anver ETL-25M4-60-2/44, vacuum lift w/powered tilt, (4) round suction pads, 7.75" diameter, 60" min beam length, 44" crossbeam, 2022, new
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Anver
Year: 2024
ANVER ETL 25M4-60-2/44 Vacuum Lifter w/ Powered Tilt, Anver Vacuum Tilters and Upenders are loaded with safety s and have come to set the standard for safe tilting of loads. Each version has been revised over the years to perform better and last longer., The pads, vacuum generators, frame, controls, hardware, filters ...more
265 lb. Anver VT-200, vacuum lift, 7.9" diameter, 8'-2" length, 12-gauge wire, 62" lift, 2022, new
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Anver
Year: 2024
ANVER VT 200 Vacuum Lift, Vacuum lifting for panels in horizontal orientation to reduce potential injury to employees. Suitable for diverse loads such as sheets of particle board, plywood, glass, steel and plastic., Lifting capacity (using VB9HV-S Vacuum Station); 355 Lbs non-porous materials, 265 Lbs semi-porous and ...more
285 lb. Anver VT-180, vacuum lift, 7.1" diameter, 8'-2" length, 12-gauge wire, 62" lift, 2022, new
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Anver
Year: 2024
ANVER VT 180 Vacuum Lift, Vacuum lifting for panels in horizontal orientation to reduce potential injury to employees. Suitable for diverse loads such as sheets of particle board, plywood, glass, steel and plastic., Can be mounted to any overhead, wall or pedestal mount jib or workstation crane!, Lifting capacity ...more
470 lb. Anver VT-250, vacuum lift, 7.9" diameter, 8'-2" length, 12-gauge wire, 62" lift, 2022, new
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Anver
Year: 2024
ANVER VT 250 Vacuum Lift, Vacuum lifting for panels in horizontal orientation to reduce potential injury to employees. Suitable for diverse loads such as sheets of particle board, plywood, glass, steel and plastic., Lifting capacity (using VB9HV-S Vacuum Station); 470 Lbs non-porous materials, 350 Lbs semi-porous and ...more
500 lb. Anver VPF-57-AC, vacuum lift, 9.25" diameter inline pad, 2022, new
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Anver
Year: 2024
ANVER VPF-57-AC Electric Generator Vacuum Lift, ANVER’s latest models of vacuum generators high capacity pumps, valves, filters and gauges for trouble-free operation in the most demanding production environments. Designed for use with a wide assortment of vacuum lifter assemblies and interchangeable pad ...more
500 lb. Anver VPF-57/20-AIR, vacuum lift, 9.25" diameter inline pad, 2022, new
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Anver
Year: 2024
ANVER VPF-57/20-AIR Generator Vacuum Lift, ANVER’s latest models of vacuum generators high capacity pumps, valves, filters and gauges for trouble-free operation in the most demanding production environments. Designed for use with a wide assortment of vacuum lifter assemblies and interchangeable pad attachments ...more
1000 lb. Anver #82000699 (T100M8-86-4/33MR), vacuum lifter, power rotation & tilt, 2015
Hildebrand Machinery Co Inc | York, PA
Seller: Hildebrand Machinery Co Inc
Location: York, PA
Mfr: Anver
Model: 82000699
Year: 2015
ANVER VACUUM LIFTER, PRICE: Loaded on Truck, Our Warehouse, York, PA …… $5,950.00, HMC Stock # 21220, Machine Serial No.: 80150001057, Machine Model No.: 82000699 (T100M8-86-4/33MR), New Date: February 2015, Rated Load Capacity: 1,000 Lbs. Total (With Proper Pads), Main Beam Length: 59", Cross Arm ...more
8000 lb. Anver #VPE3-HDO W/L800M8-190-4/53, Plate Vacuum Sheet Lifter, 115V, 2007
Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Anver
Model: VPE3-HDO
Year: 2007
Make: Anver, Model: VPE3-HDO W/L800M8-190-4/53, Year: 2007, Machine Location: Arkansas, -Lift Capacity: 8000 lbs, -Electrical Requirements: 115V, 1P, 60Hz, -Weight: 1538 lbs.