go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Initial and Double Pinch Plate Bending Rolls in Iowa

warning
26 Results

3' x 16 gauge Niagara #340, plate roll, hand crank type, 3" roll diameter, S/N 56553, 1959

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Niagara
Model: 340
Year: 1959
Length of Rolls (3) 37 inches Roll Diameter 3 inches Max. Sheet Thickness, Full Length 16 Gauge.

3' x 14 gauge Built-rite #MP3.075, Initial Pinch Power Roll, Manual Adjust, 3" roll diameter, New

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Built-Rite
Model: MP3.075
CAPACITY --------------------------------- 3 ft X 14 GA., ROLLER DIAMETER -------------------------- 3 in, HORSEPOWER ------------------------------- 1 HP/1 PHASE, 115-230/1/60, SURFACE FEET PER MINUTE ------------------ 18, WORKING AREA ----------------------------- 37 in, STANDARD PINCH ROLL OPENINGS ------------- ...more

4' x 12 gauge Webb #450, initial pinch type slip roll, 1.5 HP, 3 rolls, new

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Webb
Model: 450
Capacity 48" x 12 Gauge # Rolls 3 Power 1.5 horsepower Roll Diameter 4.25 inches Motor Voltage: 480/3/60 or 230/3/60 (Must specify when ordering), * Squirrel cage main drive * Motor with magnetic brake, * Overload and under-voltage protection on main drive motor, * Full length safety treadles across front and back of ...more

4' x 10 gauge Lemas #4-TR120/4, hydraulic 4-roll double pinch plate bending roll, 4.72" roll diameter, new

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lemas
Model: 4-TR120/4
Capacities in mild steel with 36,000 PSI yield strength: 4' x 10 ga Diameter of all rolls: 4.72" Rolling speed - approximately 16' per minute Total connected motor power @ 480 volts – 2 HP drive motor; 1 HP hydraulic system motor Approximate net weight – 3,550 pounds, S:, Direct-Drive design using ...more

4' x 10 gauge Lown #B500, initial pinch roll, 5" diameter rolls, manual drop end

Greenway & Associates Ltd | Orange City, IA
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Lown
Model: B500
, Safety stop switches, Forward/reverse drum switch, Manual adjustment of pinch roll, Manual adjustment of forming roll, Manual drop end, Manufacturer Lown 4' x 10ga Initial Pinch Roll Model B500 Condition Used Serial Number B5069 Stock Number 10905 Maximum length of bending rolls 50" Diameter of bending ...more

Get email updates for newly added Initial and Double Pinch Plate Bending Rolls

4' x 10 gauge Lemas #TR 120/4, Hydraulic 3-roll Initial-pinch Plate Bending roll, 4.72" roll diameter, New

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lemas
Model: TR
CAPACITIES IN CARBON STEEL TYPE A-36 ---- 4' X 10 GA., DIAMETER OF ALL ROLLS ------------------- 4.72", DRIVE/HYD. MOTOR HP -------------------- 2/1, APPROX. WEIGHT -------------------------- 2,820 LBS, OPTIONAL: Variable rotation speeds via frequency changer in place of single speed drive---------$2,495, NOTES: ...more

4' x 1/4" Lemas #TR 160/4, Hydraulic 3-roll Initial-pinch Plate Bending roll, 6.30" roll diameter, New

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lemas
Model: TR
CAPACITIES IN MILD STEEL W/ 36,000 PSI YIELD STRENGTH -------------------------------- 4' X 1/4" DIAMETER OF ALL ROLLS ------------------- 6.30" ROLLING SPEED (APPROX) ------------------ 15' PER MINUTE TOTAL CONNECTED MOTOR POWER @ 480 VOLTS - 5 HP DRIVE MOTOR 1 HP HYDRAULIC SYSTEM MOTOR APPROX NET. WEIGHT ...more

4' x 3/8" Lemas #TR180/4, Plate Bending Roll, 7.10 roll diameter, New

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lemas
Model: TR180/4
CAPACITY 4' x 3/8" TOP ROLL DIA. 7.10 inches DRIVE/HYD. MOTOR HP 5/2 WEIGHT 4600 pounds, * DIRECT-DRIVE DESIGN - D³ - TECHNOLOGY., * SPHERICAL ROLLER BEARINGS ON ALL ROLLS., * HYDRAULICALLY POWERED BENDING ROLLS., * CONE BENDING ATTACHMENT., * HYDRAULICALLY OPERATED DROP-END FOR QUICK REMOVAL OF ROLLED ...more

4.2' x 16 gauge Baileigh #SR-5016, powered slip roll

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Baileigh
Model: SR-5016
Forming Width 50 inches Roll Speed 16 RPM Upper Roll Diameter 3 inches Minimum Forming Diameter 4.5 inches Mild Steel Capacity 16ga. (1.5mm) Wire Grooves.315",.377",.5" (8mm, 9.5mm, 12.7mm) Stand yes Power 220V, 60hz Motor 1hp (.75kw) Approx. Shipping Weight 870 pounds Approx. Shipping Dimensions 70" x 22" x 44" Based ...more

4.25' x 1/16" Baileigh #SR-5016E, Powered Slip Roll, 16RPM, 3" roll diameter

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Baileigh
Model: SR-5016E
Forming Width 51 inches Roll Speed 16 RPM Upper Roll Diameter 3 inches Minimum Forming Diameter 4.5 inches Mild Steel Capacity 16 Ga. (1.5mm) Wire Grooves.335",.407",.512" (8.5mm, 10.3mm, 13mm) Power 110V, 60hz 15A Motor 1.5hp (1.1kw) Approx. Shipping Dimensions 71" x 24" x 44" Approx. Shipping Weight 885 pounds Based ...more

5' x 10 gauge Lemas #TR-120/5, Hydraulic 3-roll Initial-pinch Plate Bending Roll, new

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lemas
Model: TR-120/5
CAPACITIES IN CARBON STEEL TYPE A-36 ---- 5' X 10 GA., DIAMETER OF ALL ROLLS ------------------- 4.72", DRIVE/HYD. MOTOR HP -------------------- 2/1, APPROX. WEIGHT -------------------------- 3,200 LBS, OPTION: Variable rotation speeds via frequency changer in place of single speed drive. $2495.00, NOTES:, SUBJECT ...more

5' x 3/16" Amerecon #SRS-5-130, plate bending roll, 14 FPM

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Amerecon
Model: SRS-5-130
CAPACITY - MILD STEEL ---------------------- 5 ft X 3/16 in, OVERALL BENDING LENGTH --------------------- 61 in, DIAMETER OF ALL ROLLS ---------------------- 5.12 in, ROLLING SPEED ------------------------------ 14 FPM, MOTORS HP ---------------------------------- 3 1-1/2, DIMENSIONS, APPROXIMATE L X W X H --------- ...more

5' x 1/4" Lemas #4-TR-160/5, hydraulic 4-roll initial pinch plate bending roll, new

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lemas
Model: 4-TR-160/5
Capacity in carbon steel Type A-36 5' x 1/4" Roll Diameters 6.30 inches Rolling speed (approximately per minute) 16 feet Voltage 480 Drive Motor HP 5 Hyd. Motor HP 1 Weight 6200 pounds, S:, * Direct-Drive Design using no belts or chains, * Spherical roller bearings on roll shafts, * Hydraulically powered ...more

5' x 1/4" Lemas #TR 160/5, Hydraulic 3-roll Initial-pinch Plate Bending roll, 16.30" roll diameter, 16 FPM, New

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lemas
Model: TR
CAPACITIES IN CARBON STEEL TYPE A-36 ---- 5 ft X 1/4 in, DIAMETER OF ALL ROLLS ------------------- 6.30 in, ROLLING SPEED (APPROX) ------------------ 16 ft PER MINUTE, TOTAL CONNECTED MOTOR POWER @ 480 VOLTS - 5 HP DRIVE MOTOR, 1 HP HYDRAULIC SYSTEM, MOTOR, APPROX NET. WEIGHT ---------------------- 4,150 LBS, S:, * ...more

5' x 1/4" WDM #403-6-5, hydraulic initial pinch plate bending, 6" roll diameter, 5 HP, new

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Wdm
Model: 403-6-5
NOMINAL ROLL DIAMETER -------------------- 6", RATED ROLLING CAP. (MILD STEEL) ---------- 0.25” mild steel plate to 24” diameter x 5' wide, MOTOR ------------------------------------ 5 HP, VOLTAGE ---------------------------------- 230/460/PH TEFC, APPROXIMATE WEIGHT ----------------------- 4,750 LBS ...more

6' x 10 gauge Lemas #4-TR-140/6, hydraulic 4-roll initial pinch plate bending roll, new

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lemas
Model: 4-TR-140/6
Capacities in mild steel with 36,000 PSI yield strength 6' x 10 ga Roll Diameters 5.51 inches Rolling speed (approximately per minute) 16 feet Total connected motor power 480 volts 5 HP drive motor; 1 HP hydraulic system motor Weight 5575 pounds, S:, * Spherical roller bearings on roll shafts, * Hydraulically ...more

6' x 3/16" Roundo #1P-140/6, Plate Roll, 5.51" roll diameter, 15 FPM, 1990

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Roundo
Model: 1P-140/6
Year: 1990
CAPACITY MILD STEEL.1875 inches DIAMETER OF ROLLS 5.51 inches ROLLING SPEED FEET/MINUTE 15 MOTOR 3 HP OPERATING LENGTH 72 inches WEIGHT 3100 pounds, S:, MANUAL LOWER AND REAR BENDING ROLL.

6' x 1/4" Lemas #4-TR 180/6, Hydraulic 4-roll Double-pinch Plate Bending Roll, 7.10" roll diameter, 16 FPM

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lemas
Model: 4-TR
Capacity Mild Steel with 36,000 PSI yield strength: 6' x 1/4" Diameter of all rolls 7.10 inches Rolling Speed Approximately 16' per minute Total connected motor power @ 480 volts 5 HP drive motor; 2 HP hydraulic system motor Approximate net weight 8650 pounds, * Spherical roller bearings on roll shafts, * ...more

6' x 1/4" Lemas #4-TR-180/6, hydraulic 4-roll initial pinch plate bending roll, new

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lemas
Model: 4-TR-180/6
Capacities in mild steel with 36,000 PSI yield strength 6' x 1/4" Roll Diameters 7.10 inches Rolling speed (approximately per minute) 16 feet Total connected motor power 480 volts 5 HP drive motor; 1 HP hydraulic system motor Weight 8650 pounds, S:, * Spherical roller bearings on roll shafts, * Hydraulically ...more

6' x 1/4" Lemas #TR-180/6, Hydraulic 3-roll Initial-pinch Plate Bending Roll, new

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lemas
Model: TR-180/6
CAPACITIES IN CARBON STEEL TYPE A-36 ---- 6 ft X 1/4 in, DIAMETER OF ALL ROLLS ------------------- 7.10 in, DRIVE/ HYD. MOTOR HP ------------------- 5/2, APPROX. WEIGHT -------------------------- 5,900 LBS, - POSITIVE DRIVE REGARDLESS OF POSITION OF PINCH ROLL, - GROOVES FOR 1/4 in, 3/8 in, 1/2 in ROUND BAR, - ...more

8' x 5/16" Lemas #TR 200/8, Hydraulic 3-roll Initial-pinch Plate Bending roll, 16 FPM, New

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lemas
Model: TR
* Capacities in mild steel with 36,000 PSI yield strength: 8' x 5/16" * Diameter of all rolls: 7.87" * Rolling speed - approximately 16' per minute * Total connected motor power @ 480 volts – 5 HP drive motor; 3 HP hydraulic system motor * Approximate net weight –8,900 pounds :, * Positive drive ...more

10' x 9/64" Lemas #4-TR 180/10, Hydraulic Double-pinch Plate Bending Roll, 10 gauge capacity, 4-roll, 7.10" diameter, 16 FPM, New

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lemas
Model: 4-TR 180/10
Capacities in mild steel with 36,000 PSI yield strength 10' x 10 ga. Diameter of all rolls 7.10 inches Rolling speed approximately 16' per minute Total connected motor power @ 480 volts 5 HP drive motor; 2 HP hydraulic system motor Approximate net weight 9700 pounds, STANDARD EXECUTION:, * Spherical roller ...more

10' x 3/4" Webb #15L-1510, Initial Pinch 3-roll Plate Rolling Machine, 15" roll diameter, 15 FPM, 1965, Used

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Webb
Model: 15L-1510
Year: 1965
CAPACITY (MILD STEEL) 10' X 3/4" LENGTH OF ROLLS 122 inches DIAMETER OF ROLLS 15 inches ROLLING SPEED 7.5 TO 15 FPM WEIGHT OF MACHINE (APPROX.) 63200 pounds, - 30 HP., 220/440/3/60 AC SLIP RING VARIABLE SPEED MAIN DRIVE MOTOR AND CONTROLLER., - 15 HP. MOTOR FOR REAR ROLL ADJUSTMENT AND CONTROLLER., - 3 HP. MOTOR ...more

12' x 9/32" Roundo #PASS 230/12, Plate Bending Roll, Four Roll Type, 9.65" roll diameter, 20 FPM, New

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Roundo
Model: PASS
OVERALL LENGTH OF ROLLS ------------------------ 146 in, DIAMETERS OF THE UPPER AND LOWER CENTRAL ROLLS - 9.65 in, DIAMETER OF SIDE ROLLS ------------------------- 7.68 in, TOTAL HP AT 440 VOLTS -------------------------- 11, BENDING SPEED- INFINITELY VARIABLE ------------- 0-20 ft PER MIN, ADJUSTING SPEED OF LOWER ...more

14' x 1/16" Built-rite #MP4.059, Initial Pinch Power Roll, Manual Adjust, 3" roll diameter, New

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Built-Rite
Model: MP4.059
CAPACITY -(MILD STEEL)-------------------------- 4 ft X 16 GA., ROLL DIAMETER ---------------------------------- 3 in, HORSEPOWER, 1 AND 3 PHASE ---------------------- 3/4HP,1 PH, SURFACE FEET/MINUTE ---------------------------- 18, WORKING AREA ----------------------------------- 49 in, STANDARD PINCH ROLL OPENINGS ...more

Baileigh #PR-514, plate roll, S/N 221618, 2006

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Baileigh
Model: PR-514
Year: 2006
Forming Width 60 inches Roll Speed 6 RPM Upper Roll Dia. 3.50 inches Roll Adjustment Back Hydraulic Minimum Forming Dia 5.25 inches Motor 1.5kW Wire Grooves Yes, 8, 10, 12MM Capacity (Mild Steel) 14 ga. (.075") Power 220V, 3PH, 50HZ Shipping Dimensions 91" x 33" x 55" Shipping Weight 1690 pounds, NOTES:, SUBJECT TO ...more