Also See 16 Results
4' x 1/8" Akyapak #AS90-12/2.5, plate roll, digital display, induction hardend rolls
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Akyapak
Model: AS90-12/2.5
11 GA X 4’ Plate Roll with Digital Display, Induction Hardened Rolls., Working Length: 4’Pre-Bending: 12 GABending: 11 GAYield Point: 35,000 PSINumber of Rolls: 3Top Roll: 3.54"Min. Bending: 5.12"Motor Power: 1.5 HPLength: 6.4’Height: 3.7’Width: 3.0’Weight: 1,100 LBSINCLUDES: ...more
4' x 1/8" Bendmak #CY90-12/3.0, plate roll, cast iron frame, cone bending device
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: CY90-12/3.0
4' X 11GA Plate Roll with Cast Iron Frame, Central Rollers, Cone Bending Device, Self Braking Main Motor and Remote Emergency Stopping w/ Safety Trip Wire., Working length: 49.21"Pre-bending: 0.09"Bending: 0.11"Yield Point: 240 N/mm2Number of Rolls: 3Top Roll ˜: 3.54"Min. Bending ˜: ...more
4' x 11/64" Akyapak #ASM-110, plate roll, digital read out, forward/reverse foot pedal, 2 HP, 220 V.
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Akyapak
Model: ASM-110
4’ X 8 Ga Plate Roll with Forward and Reverse Foot Pedal, 3 HP 220-Volt 3-Phase Motor, Digital Readout, Hardened Rolls., Working Length: 4’Pre-Bending Thickness: 10 GaMax Thickness: 8 GaTop Roll Diameter: 4.3"Min. Bending Diameter: 5.9"Motor Power: 3 HPBending Speed: 14.8’ Per MinLength: ...more
4' x 7/32" Bendmak #CYL140-12/5.5, 3-rolls initial pinch plate rolling machine
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: CYL140-12/5.5
1/4" X 4' Three Rolls Initial Pinch Plate Rolling Machine with Digital Readout, Hardened Rolls, Motorized Back Roll, Dual Voltage, Durable Cast Iron Frame, Powered Central Rollers, Cone Bending Device, Self Brake Motor, Openable Upper Roll, Option To Power Lower and Back Roll, and Separate Electric Control Panel ...more
5' x 10 Ga. Ficome #W11-3-1600, Plate Bending Machine, 3-Roll, 4 HP, 5.4" diameter, 2023
AM Metalmaq Inc | Hialeah, FL
Seller: AM Metalmaq Inc
Location: Hialeah, FL
Mfr: Ficom
Model: W11-3-1600
Year: 2023
, Set of angle bending rolls at open end of machine, Remote electrical stand with forward/reverse, E-stop and top roll control, S:, Top mounted handle to lift upper roll for easy workpiece removal, Safety line all around the machine for emergency stop, Powered bottom rolls--run forward and reverse, All three rolls are ...more
Get email updates for newly added Initial and Double Pinch Plate Bending Rolls
5' x 10 gauge Lemas #TR-120/5, 3-roll plate bending roll, 2018
Generation Machine Tools | Sarasota, FL
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Lemas
Model: TR-120/5
Year: 2018
LEMAS TR 120/5 5 x 10 Gauge 3 Roll Plate Bending Roll 2018 #GMT-3406, Reference #GMT-3406, Model # TR 120/5, Serial # 31911394, Year of manufacture- 8/2018, Bending capacity- 5 x 10 Gauge mild steel, Top roll diameter- 4.72, Bottom roll diameter- 4.72, Minimum bending diameter- 200mm, ***Machine was only used on 3 ...more
5' x 1/4" Bendmak #CYL-ST-140-15/6, plate roll, back roll w/motor, cone bending device
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: CYL-ST-140-15/6
1/4" X 5’ Initial Pinch Plate Roll with Digital Readout, Hardened and Polished Rolls, Motorized Backroll and Cone Bending Device, Working length: 5’Pre-bending: 3/16"Bending: 1„4"Number of Rolls: 3Top Roll ˜: 6.7"Min. Bending ˜: 10"Motor Power: 5.4 HP Length: ...more
5' x 1/4" Durma #MRB-S1506, plate roll, digital read out for roll positions, 5.9" top roll diameter, 2011
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Durma
Model: MRB-S1506
Year: 2011
5’ X ¼" Hydraulic Plate Roll with Digital Readout for Roll Positions, Powered Rear and Bottom Roll Adjustments, Induction Hardened Rolls, Braking System, Gear Driven Top and Bottom Rolls., Bending Length: 60.24", Bending Capacity: 0.24", Prebending Capacity: 0.16", Top Roll Diameter: ...more
6' x 1/4" Ficom #W11-6 X 2000, Plate Bending Roll, 3-Roll, 5.3 HP, 7.25" Roll diameter, 2023
AM Metalmaq Inc | Hialeah, FL
Seller: AM Metalmaq Inc
Location: Hialeah, FL
Mfr: Ficom
Model: W11-6 X 2000
Year: 2023
, Set of angle bending rolls at open end of machine, Remote electrical stand with forward/reverse, E-stop and top roll control, S:, Top mounted handle to lift upper roll for easy workpiece removal, Safety line all around the machine for emergency stop, Powered bottom rolls--run forward and reverse, All three rolls are ...more
6' x 5/16" Bendmak #CYL-ST200-20/8, 3-roll asymmetrical plate roll, back roll w/motor
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: CYL-ST200-20/8
5/16" x 6' 3-Roll Asymmetrical Plate Roll With Back Roll W/ Motor, Cone Bending Device, Hardened and Polished Rolls, Body is Made of St 52 Steel, Opening Top Roll to Side After Bending for Taking Out The Material Easily, Asymmetrical Design For Perfect Bending, and for Perfect Result Top and Bottom Rolls are ...more
7' x 5/16" Bendmak #CY3R-HHS190-20/08, 3-rolls hydraulic plate roll, digital display
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: CY3R-HHS190-20/08
5/16" X 6' 3-Rolls Hydraulic Plate Roll with Hardened Rolls, Digital Display, Steel (ST-52) Machine Body, Separate Control Panel, Movement & Parallelism Adjustment of Rollers from Control Panel., Working Length: 6’Pre-Bending: 1/4"Bending: 5/16"Number of Rolls: 3Motor Power: 4.02 HPTop Roll ˜: ...more
10' x 11 gauge Akyapak #ASM-S-170-30/3, 6.7" top roll diameter, 15.7' length, 5 HP
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Akyapak
Model: ASM-S-170-30/3
10’ X 11 GA Plate Roll with Separate Moving Control Panel, Induction Hardened Rolls, Motorized Back Roll, Central Rollers Powered by Electric Motor & Gear Box., Working Length: 10’, Pre-Bending Thickness: 11 GA, Max Thickness: 8 GA, Top Roll Diameter: 6.7", Min. Bending Diameter: 10.0", Motor ...more
10' x 5/8" Davi #MCO3030, 3-Roll plate roll, Attached Control panel, hydraulic drop end, 2005
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Davi
Model: MCO3030
Year: 2005
…" X 10’ Plate Rolling Machine with Attached Control Panel, 3 - Powered Rolls and Hydraulic Drop End for Easy Part Removal., Capacity: 10’ X …", Motor: 18 HP / 460V / 60Hz, INCLUDES: Attached Control Panel, 3 - Powered Rolls and Hydraulic Drop End for Easy Part Removal. ...more
10' x 1-1/2" Davi #MCB-3045, Plate Roll w/ Leonardo Systems Cotnrol, 90 HP, 480 V., 2006
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Davi
Model: MCB-3045
Year: 2006
1-½" X 10’ CNC Plate Roll with Leonardo Systems Control and Hydraulic Support Guides., Max. Plate Thickness: 1-½", Max. Width: 10’, Motor Power: 90 HP, Electrical: 480 V / 3 Ph / 60 Hz, Approx. Weight: 65,000 Lbs, INCLUDES: Leonardo Systems Control and Hydraulic Support Guides., ***We ...more
13' x 2.9" Faccin #HAV-4072, Plate Roll, Additional Top and Bottom Rolls, 2009
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Faccin
Model: HAV-4072
Year: 2009
2.953" X 13’ Plate Roll with Additional Top and Bottom Rolls, Full Length Rolling Capacity (@ 36,000 PSI Yield Point): 2.953", Pre-Bending Capacity: 1.969", Max. Work Length: 158", Roll Diameter: 22", Dimensions: 339" X 138" X 146", Weight: 222,000 Lbs, INCLUDES: ...more
20' x 1/4" Roundo #PS320, Double Pinch Plate Roll, digital read out, Hydraulic Drop End, 1981
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Roundo
Model: PS320
Year: 1981
¼" X 20’ Double Pinch Plate Roll with Digital Readout, Hydraulic Drop End and Exit Roller Sheet Support., Capacity (Mild Steel): ¼" X 20’, Top Roll Diameter: 15", Side Roll Diameter: 12", Diameter at Max. Capacity: 1.3 X Top Roll, Motor: 15 kW, Dimensions: 38’ X 80" ...more
