1 - 50 of 83 listings
JUST ADDED!
18" Kysor Johnson #KJ10, Horizontal Band Saw, 3/4" x 138" blade, 50-270 FPM, 11" x18" bed
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Kysor Johnson
Model: KJ10
KYSOR JOHNSON KJ10 Horizontal Band Saw #8285 #1, Capacity, rounds - 10", Capacity, flats - 18", Blade width - 3/4", Blade length - 138", Blade speeds - 50, 90, 160, 270 FPM, Bed work area - 11" x 18", Vise size - 5" x 11", Motor HP - 4 HP, Motor RPM - 1725, Volts - 115 / 230, Phase - Single, Cycles - 60, Approximate ...more
JUST ADDED!
Hydmech #H-230A, horizontal band saw, 1" x 1176" blade, 50-350 SFM, 3 HP VFD, 19" multi-indexing
ACT Machinery | Fullerton, CA
Category: Horizontal Band Saws
Seller: ACT Machinery
Location: Fullerton, CA
Model: H-230A
, Capacity, 9" x 9", Blade Size, 1" x 9'8", Blade Drive, 3 HP VFD, Blade Speed, 50-350 SFM, Automatic Multi-Indexing, 0-19", Remnant Length, 2.5" (6" with bundling), Machine Weight, 2,200 lbs., Table Height, 35", Dimensions (LxWxH), 61" x 63" x 67", Hydmech ...more
5" x 13" KBC #BS-12A, horizontal bandsaw, 1" x150" blade, 3 HP, automatic cutting cycle, parts counter, 2014
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Kbc
Model: BS-12A
Year: 2014
2014 KBC Machinery BS-12A Horizontal Band Saw #7513 #2, Cutting Capacity at 90: Rectangular. 5 x 13, Cutting Capacity at 90: Round. 12, Blade Size 1 x 150, Blade Speeds: (6) 45, 75, 90, 120, 150, 240 SFPM., Minimum Length of Cut: 1/2, Motor: 3 HP, Power Requirements: 230/460V, 3 PH., Approximate Dimensions: 64x85x75h ...more
JUST ADDED!
6" x 11" W.f. Wells #A6, Horizontal Band Saw, quick adjust vise, 0.5 HP, 4 speed
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: W.F. Wells
Model: A6
W.F. WELLS A6 Horizontal Band Saw #8258 #1, Capacity & Cutting Dimensions, Maximum Round Capacity: 6 inches, Maximum Rectangular Capacity: 6 inches High x 11 inches Wide, Vise Type: Manual screw clamp with quick-adjust jaw, Drive System & Mechanicals, Motor Options: 1/2 HP motor, Speeds: 4-speed step V-belt ...more
6-7/8" x 11.8" Amada #HA-250, Horiz Band Saw, 1" x 0.042" x 137" blade, 5 HP, 60/115/205 FPM
GTH Used Machinery Intl | Pico Rivera, CA
Category: Horizontal Band Saws
Seller: GTH Used Machinery Intl
Location: Pico Rivera, CA
Mfr: Amada
Model: HA-250
Get email updates for newly added Horizontal Band Saws
Horizontal Band Saws (also known as horizontal saws) are cutting machines designed to slice through materials like metal, wood, or plastic using a continuous band blade mounted horizontally. Commonly used in industries like metalworking, woodworking, and manufacturing, they are ideal for making straight or angled cuts in bars, pipes, and sheets. Horizontal band saws are essential for efficient, precise cutting in industrial and fabrication applications.
JUST ADDED!
7" x 12" Grizzly #G0561, Horizontal Band Saw, 1 HP, 0.75" x 93" blade, 90-255 FPM, 2014
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Grizzly
Model: G0561
Year: 2014
8" x 12.75" Enco #HVB-108G, horizontal / vertical bandsaw, coolant tank & pump, 1984
Deal Makers Machinery | Thousand Oaks, CA
Category: Horizontal Band Saws
Seller: Deal Makers Machinery
Location: Thousand Oaks, CA
Mfr: Enco
Model: HVB-108G
Year: 1984
Under Power & Running.
8.5" x 13.5" Carolina #HD10, Horizontal Band Saw, 9' 7" x 1.2" blade, 3 speed, 50/108/153 FPM, 0.75 HP, 115V., 1ph, w/ vise
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Model: HD10
CAROLINA HD10 Horizontal Band Saw #8026 #1, Capacity: 8.5" x 13.5", Blade: 9'7" x 1/2", Blade Speed: 3-speed (50 / 108 / 153 FPM), Motor: Typically 0.75 HP, 115V, 1-phase, Manual vise, Counterbalance spring for vertical cuts.
9" x 12" Bolton Tools #BS-912B, horizontal band saw, 377 FPM
Turners Machinery Inc | Santa Paula, CA
Category: Horizontal Band Saws
Seller: Turners Machinery Inc
Location: Santa Paula, CA
Mfr: Bolton Tools
Model: BS-912B
9" X 12" BOLTON TOOLS BS-912B METAL CUTTING BAND SAW, MAKE BOLTON TOOLS, MDL: BS-912B, S/N: A19121605, CAPACITY ROUND: @0 DEGREES: 9";@45 DEGREE 6, CAPACITY RECTANGULAR: @0DEGREE" 7" X 12; @45DEGREE: 5" X 6", BLADE SIZE: 104-1/2" X 1" X 0.035", BLADE SPEEDS: 105, 196,288,377 FPM, 115 VOLT, COOLANT TANK & COOLANT ...more
9" x 15.9" Do All #C-916A, Horiz Band Saw, 2 HP, 1" x 158" x 0.035" blade, variable speed, 105-275 FPM, 14.5" wheel, w/ feed, vise, coolant, discharge tray, 2000
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Model: C-916A
Year: 2000
2000 DO ALL C-916A Horizontal Band Saw #8084 #1, Capacity @ 90: 9" (H) x 16" (W) Rectangle, Capacity @ 45: 9" (H) x 8" (W) Rectangle, Round Stock Capacity: Up to 10-3/4", Blade Size: 159" (or 158") x 1" x 0.035", Blade Speed: Variable, 105 - 275 FPM (feet per minute), Motor: 2 HP, 3 Phase, Band Tension: 30,000 PSI ...more
9" x 16" DoAll #C-916, horizontal bandsaw, 1" x 0.035" x 158" blade, 105-275 FPM, 14" wheel, 2 HP, manual clamp
Sterling Machinery Exchange | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Doall
Model: C-916
9" x 16" DoAll #C-916A, horizontal bandsaw, 105- 275 FPM, 1" x 0.035" x 158" blade, 14" wheel diameter, 2 HP, mechanical clamp, discharge tray
Sterling Machinery Exchange | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Doall
Model: C-916A
Capacity: 9" x 16" Blade Speed ( Variable ) 105- 275 FPM Blade Size 1" x 0.035" x 158" Blade Wheel Diameter (2) 14" Band Tension 30,000 PSI Automatic Indexing Lengths 3/16" to 24" Operation Automatic Horsepower 2 H.P. Voltage 230V ~ 3 Phase WEIGHT 1,700 LBS. Dimension (L x D x H) 93" X 59" X 64" 10 Ft. Material Supply ...more
Featured
9" x 16" DoAll #C916SA, automatic swivel head horizontal band saw, 170" x 1" x .03.5" blade, 2 HP
Sierra Equipment | Hayward, CA
Category: Horizontal Band Saws
Seller: Sierra Equipment
Location: Hayward, CA
Mfr: Doall
Model: C916SA
Do-All C916 SA, automatic swivel head, horizontal band saw, 170" blade 9" x 16" DOALL "C916-SA" AUTOMATIC SWIVELING-HEAD HORIZONTAL BAND SAW - 10.75 Rounds - 60-Degree Incremental Swivel Head - Automatic Indexing 9" x 16" DOALL AUTOMATIC SWIVELING-HEAD HORIZONTAL BAND SAW Model C-916SA : Automatic Indexing Incremental ...more
9" x 16" W.F. Wells #L-9, horizontal bandsaw, 14.5" wheel blade, 60-300 FPM, coolant, manual clamping, work stop
Sterling Machinery Exchange | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: W.F. Wells
Model: L-9
Blade Speed (Variable) 60 - 300 FPM Blade Wheel Size 14-1/2" WEIGHT 750 Lbs. Capacity 9" x 16" S: Coolant Manual Clamping Work Stop American Made.
9" x 17" W.F. Wells #W-9, Dual Column Horizontal Band Saw, 70-380 FPM, 1" x 0.035" x 11' 6" blade
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: W.F. Wells
Model: W-9
W.F. Wells W-9 Dual Column Horizontal Band Saw 9" x 17" #6720 #1, Capacity:, Rectangle 90 Degrees: 9" x 17", Round @ 90 Degrees: 9", Rectangle @ 45 Degrees: 9" x 8", Round @ 45 Degrees: 8", Blade Speed (Variable): 70- 380 FPM, Blade Size: 1" x 0.035" x 11' 6", Sawing Force (Variable): 30- 120 Lbs., Band Wheel ...more
9" x 17" W.F. Wells #W-9-1, horizontal bandsaw, 70-380 FPM, 138" x 1" x .035" blade size, 3 HP
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: W.F. Wells
Model: W-9-1
W.F. Wells W-9-1 Horizontal Band Saw #7631 #1, Capacity:, Round:, @ 90: 9, @ 45: 8, Rectangular:, @ 90: 9 x 17, @ 45: 9 x 8, Weight Capacity: 2,000 lbs., Blade Speed: 70 380 FPM, Blade Size: 138 x 1 x.035, Bandwheel Size: 14 1/2, Sawing Force: 30 120 lbs., Work Height: 26, Motor: 3 HP / 208v, 230v, 460v / 3ph OR 1.5 ...more
9" x 17" W.F. Wells #W-9-1, vari-hydraulic, 70-380 SFPM, horizontal bandsaw, 3 HP, Coolant, New
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: W.F. Wells
Model: W-9-1
Capacity 9" x 17" Operation Type Semi-Automatic 45 Degrees 45 Degree Round 8" 45 Degree Rectangle 8" x 9" 90 Degrees 90 Degree Round 9" 90 Degree Rectangle 9" x 17" Weight Capacity 2000 LBS Blade Speed 70 - 380 SFPM 45 Degree TILT Round Solid 2" Sawing Feed Variable, Hydraulic Blade Guide Carbide with Roller Backup ...more
10" x 11" Amada #HA-250, Horiz Band Saw, 1" x 0.037" x 11' 6" blade, 5 HP, 27-250 FPM, 1996
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Amada
Model: HA-250
Year: 1996
AMADA HA250 AUTOMATIC HORIZONTAL BANDSAW 10" x 11" #8181 #1, Capacity, Rounds: 10", Rectangles: 10" x 11", Blade Speeds: 27 - 250 FPM, Blade Drive Motor: 5 HP, Number of Programmable Cuts: 0 - 99999, Blade Size: 1" x 0.037" x 11'6", Hydraulic Pump Motor: 1 HP, Hydraulic Tank Capacity: 5.3 Gal, Coolant Tank ...more
10" x 11" Amada #HA-250W, automatic horizontal band saw, 5 HP, 1" x 0.037" x 11' 6" blade, 27-250 FPM, 2014
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Amada
Model: HA-250W
Year: 2014
2014 AMADA HA250W AUTOMATIC HORIZONTAL BANDSAW 10" x 11" #8199 #1, Capacity, Rounds: 10", Rectangles: 10" x 11", Blade Speeds: 27 - 250 FPM, Blade Drive Motor: 5 HP, Number of Programmable Cuts: 0 - 99999, Blade Size: 1" x 0.037" x 11'6", Hydraulic Pump Motor: 1 HP, Hydraulic Tank Capacity: 5.3 Gal, Coolant Tank ...more
10" x 11" Amada #HA-250W, automatic horizontal band saw, 5 HP, 1" x 0.037" x 11' 6" blade, 27-250 FPM, 2012
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Amada
Model: HA-250W
Year: 2012
AMADA HA250W AUTOMATIC HORIZONTAL BANDSAW 10" x 11" #8198 #1, Capacity, Rounds: 10", Rectangles: 10" x 11", Blade Speeds: 27 - 250 FPM, Blade Drive Motor: 5 HP, Number of Programmable Cuts: 0 - 99999, Blade Size: 1" x 0.037" x 11'6", Hydraulic Pump Motor: 1 HP, Hydraulic Tank Capacity: 5.3 Gal, Coolant Tank ...more
10" x 11" Amada #HA250, Automatic Horiz Bandsaw, 5 HP, 250 FPM, 1" x 0.037" x 11' 6" blade, 1997
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Amada
Model: HA250
Year: 1997
AMADA HA250 AUTOMATIC HORIZONTAL BANDSAW 10" x 11" #8141 #1, Capacity, Rounds: 10", Rectangles: 10" x 11", Blade Speeds: 27 - 250 FPM, Blade Drive Motor: 5 HP, Number of Programmable Cuts: 0 - 99999, Blade Size: 1" x 0.037" x 11'6", Hydraulic Pump Motor: 1 HP, Hydraulic Tank Capacity: 5.3 Gal, Coolant Tank ...more
10" x 12" Amada #HA-250W, horizontal band saw, 138" x 1.34" x .43" blade, automatic shuttle feed
Machnet | Santa Monica, CA
Category: Horizontal Band Saws
Seller: Machnet
Location: Santa Monica, CA
Mfr: Amada
Model: HA-250W
Amada HA-250W Automoatic Band Saw 10" x 12", Amada HA-250W Automatic Band Saw, Blade Dimensions: 138" x 1.34", Blade Thickness: 0.43", Automatic Shuttle Feed.
10" x 16" DoAll #400S, miter cutting heavy duty metal, spring loaded blade tension handwheel, new, #SM400S
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: 400S
Operation Type Manual 90 Degree Rectangle 16" x 9" 90 Degree Round 10-3/4" 45 Degree Rectangle 10-3/4" x 9" 45 Degree Round 10-3/4" Blade Size x Length 1" x 0.035" x 158" Blade Speeds 105 - 275 FPM Wheel Diameter 14.5" Material Pass Line Height 29-1/8" Table Capacity 1800 LBS Coolant System 6 Gallons Horsepower 2 H.P. ...more
10" x 16" Scotchman #SH1016, heavy duty horizontal band saw, 1" x .035" x 159" blade, 105-275 SFPM, power clamp, hydraulic horizontal clamp, swivel head
Sterling Machinery Exchange | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Scotchman
Model: SH1016
Capacity 10" x 16" Capacity At 90 Degrees 10" High x 10 - 3/4" Wide, Blade Dimensions 1" X.035" X 159" Vise Manual Blade Length 159" Feed Control Infinitely Variable, Hydraulic Blade Speeds_SFPM Variable: 105 - 275 SFPM Blade Speed Variable, 105 To 275 SFPM Blade Thickness.035" Blade 1" x 0.035" x 159" Bi - Metal ...more
10" x 18" Dake Johnson #JH-10, Horizontal Band Saw, 1" wide, 0.035" thick, 137" long blade
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Johnson
Model: JH-10
Dake Johnson JH-10 Horizontal Band Saw #7621 #1, Capacity: 10" rounds, 18" flats, Blade width: 1", Blade length: 137", Bed (work area): 11" x 18", Drive motor: 1, Voltage 110/220V - 1 phase, Coolant: Yes, Floor space: 29" x 70", Height (closed) 39", Height w/casters (opt.): 43", Height (open): 63", Floor to bed: ...more
11" x 11-3/4" DoAll #DC-280NC, fully automatic, PLC control for all-electric, 5 HP, new, #SMDC280NC
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-280NC
Operation Type Fully Automatic Bundle Capacity Max. 9-3/4" x 4" Bundle Capacity Min. 6-1/2" x 5/8" Blade Speed 72 - 390 SFPM Blade Size 1-1/4" x 0.042" x 151" Material Pass Line Height 27-1/2" Automatic Indexing Lengths: Single 15.75" Multiple 141.73" Remnant Length Single Piece (Non-Bundle) Coolant Pump Horsepower ...more
11" x 18" Dake Johnson #JH10, horizontal bandsaw, 50-270 FPM, 1" x 137" blade, 1 HP
Sterling Machinery Exchange | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Johnson
Model: JH10
Blade Speeds (4) 50 - 90 - 160 - 270 F.P.M Blade Size 1" x 137" Floor Space 70" x 29" WEIGHT 1,000 LBS S: Horsepower: 1.
11.75" x 11" Soco #VB280FA, Auto Horiz Band Saw, 151" x 1.25" x 0.042" blade, 66-262 FPM, 5 HP, w/ chip auger, automatic cycle & feed
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Soco
Model: VB280FA
SOCO VB280FA Automatic Horizontal Band Saw #7687 #2, Cutting Capacity Round: 11, Cutting Capacity Rectangle (W x H): 11.75 x 11, Band Saw Blade (L x W x Gage): 151 x 1-1/4 x 0.042", Band Speed: 66-262 fpm, Band Drive: 5 hp, Hydraulic Pump: Motor 1 hp, Hydraulic Tank Capacity: 16 gal, Coolant Motor: hp, Coolant Tank ...more
12" x 7" Southern Distributing #HV740, horizontal band saw, 0.75 HP, 115/230 V., 93" x 0.75" x 0.032" blade
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Model: HV740
SOUTHERN DISTRIBUTING & MFG HV740 Horizontal Band Saw #8065 #1, Motor: 3/4 HP, 115/230V dual-phase motor, Cutting Capacity (Flat Stock): 7 inches (height) x 12 inches (width), Blade Speeds: 4 speeds: 86, 132, 178, 260 RPM, Blade Size: 93 inches (length) x 3/4 inch (width) x 0.032 inch (thickness), Vise: Adjustable ...more
12" x 12" DoAll #C-8, horizontal band saw, 160" x 1" blade, 65-250 FPM
Turners Machinery Inc | Santa Paula, CA
Category: Horizontal Band Saws
Seller: Turners Machinery Inc
Location: Santa Paula, CA
Mfr: Doall
Model: C-8
DOALL C-8 HORIZONTAL BAND SAW, MAKE: DOALL, MDL: C-8, S/N: 223-67430, Band Length: 160, Band Width: 1, Capacity: 12 "X 12", Rounds: 12", Blade Speeds: (4) 65 TO 250 FPM, PRICE: $3,950.00, LOCATION: SANTA PAULA, CA 93060, *** SHOWN ARE TO BE USED, AS A GUIDELINE ONLY. IT IS THE CUSTOMERS, RESPONSIBILITY TO CHECK FOR ...more
12" x 12" Hem #H100A, horizontal automatic band saw, 5 HP
Deal Makers Machinery | Thousand Oaks, CA
Category: Horizontal Band Saws
Seller: Deal Makers Machinery
Location: Thousand Oaks, CA
Mfr: Hem
Model: H100A
3 HP, AUTOMATIC, UNDER POWER & USING.
13" x 14" Marvel Spartan #PA13/3, heavy duty semi-auto horizontal billet saw, 13' 6" x 1.25" x .042" blade, 60-330 SFPM
Sterling Machinery Exchange | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Marvel
Model: PA13/3
Round Cutting Capacity 13" Rectangle Cutting Capacity 13” X 14” Saw Blade Dimensions :13’6” X 1.25” X.042" Blade Speeds 60-330 SFPM Hydraulic Pump 1 HP Coolant Pump 1/8 HP Table Height 27-1/2” WEIGHT 27-1/2” Work Load Capacity 6,250 Lbs. Maximum Index Length 20" Weight (Approx.) 4,500 LBS. s Hydraulic ...more
13" x 14" Spartan #PA13/3/EPC, Automatic Horizontal Band Saw, 5 HP, 1.25" width x 13.6" long blade, 0.042" thickness
JPS International Inc | Lake Forest, CA
Category: Horizontal Band Saws
Seller: JPS International Inc
Location: Lake Forest, CA
Mfr: Spartan
Model: PA13/3/EPC
EquipmentHorizontal Band SawsSPARTAN PA13/3/EPC Horizontal BandsawSPARTAN PA13/3/EPC Horizontal BandsawHave one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionUsedQuantity1 availableRequest QuoteLoading.Have one to sell?Sell NowOverviewType:Horizontal Band SawsManufacturer:SPARTANModel:PA13/3/EPCStock ...more
13" x 15" DoAll #DC-330NC, fully automatic, PLC control for all electric, 5 HP, new, #SMDC330NC
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-330NC
Operation Type Automatic Capacity. Bundle Capacity Max. 14-1/2" x 6-5/8" Bundle Capacity Min. 6-1/2" x 2" Blade Speed 72 - 390 SFPM Blade Size 1-1/4" x 0.042" x 167" Material Pass Line Height 27-1/2" Automatic Indexing Lengths:. Single 19.68" Multiple 177.16" Remnant Length Single Piece (Non-Bundle) Hydraulic Pump ...more
13" x 15" DoAll #DC-330SA, semi-auto high production, hyd.blade tensions, 66-262 FPM, 5 HP, new, #SMDC330SA
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC-330SA
Operation Type Semi-Automatic Capacity. Blade Speed 66 - 262 fpm Blade Size 1-1/4" x 0.042" x 167" Material Pass Line Height 27-1/2" Coolant Pump Horsepower 1/4 H.P. Coolant Tank 21 Gallons Hydraulic Pump Horsepower 1 H.P. Horsepower 5 H.P. Voltage 230V ~ 3 Phase WEIGHT 3638 lbs s Work Light NC Control: Ease Of ...more
13" x 18" Hyd-Mech #S20A-Series-III, horizontal band saw, 14'10" x 1" x .035" blade, 75-350 SFM
Machinery Network Inc | Encino, CA
Category: Horizontal Band Saws
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Hyd-Mech
Model: S20A-SERIES-III
Year: 2008
Capacity Rectangular (h x w) Round, 90 13 x 18 13, 45 13 x 10 3/4 12, 30 13 x 7 3/4 8 1/2, Blade Size 1 x 14 10, Blade Drive 5 HP VFD, Machine Voltage 480 v (all other voltages require optional transformer), Blade Speed 75-330 SFM, Coolant Tank Capacity 12 Gallons, Work Load 5,000 lbs., Machine Weight 3,800 lbs. ...more
13" x 18" Hyd-Mech #S20P, pivot style, cast-iron head, easy swing, 36" material in-feed roller, semi-auto control, new
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Hyd-Mech
Model: S20P
Capacity 13" x 18" 30 Degrees Rectangle 7-3/4" x 13" 45 Degree Round 12" 45 Degrees 45 Degree Rectangle 10-3/4" x 13" 30 Degrees Round 8-1/2" 30 Degrees Operation Type Semi-Automatic Blade Size 1" x 14'-10" Blade Speed 45 - 330 SFM 90 Degrees Horsepower 3 HP VFD Voltage 208/240/480/575V Warranty 2 Year Parts & 1 ...more
13" x 19.7" Cosen #MH-500M, semi-auto horizontal mitering saw, 13' 7" x 1" x .035" blade, 75-246 FPM, 2007
Manufacturing Solutions | Santa Ana, CA
Category: Horizontal Band Saws
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Cosen
Model: MH-500M
Year: 2007
Round 13", Rectangular 13" x 19.7"Round 11.8", Rectangular 11" x 9.4"Round 8.6", Rectangular 11" x 8.6"13'7" x 1" x.035"75, 114, 164 and 246 FPM32.6"3 HP7j' x 4' x 5'H1,980 lbs..
13" x 20" Cosen #MH-500M, semi-automatic mitering horizontal bandsaw, 13' 7" x 1" x .035" blade
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Cosen
Model: MH-500M
Cosen MH-500M Semi-Automatic Mitering Horizontal Band Saw 13" x 20" #6980 #1, Capacity:, 0:, Round: 13, Rectangular: 11 x 19.7, +45:, Round: 11.8, Rectangular: 11 x 9.4, +60:, Round: 8.6, Rectangular: 11 x 8.6, Blade Speed: 60Hz 75, 114, 164, 246 FPM, Blade Size: 13 7 x 1 x.035, Work Bed Height: 32.6, Coolant Tank ...more
14" x 16" DoAll #C-4100NC, prog semi-auto band saw, 105-275 FPM, 1.5" x 186" blade, 2007
TNT Industrial | Orange, CA
Category: Horizontal Band Saws
Seller: TNT Industrial
Location: Orange, CA
Mfr: Doall
Model: C-4100NC
Year: 2007
Main Drive Motor 10 HP. Single Automatic Index Length 24" (Max). Horizontal Band Saws. Hydraulic Drive Motor 2 HP. Round Capacity 16". Blade Speed 40 to 360 FPM. Variable Speed 105 - 275 fpm. Rectangular Capacity 16" x 14"..
14" x 16" Hem #H120M, horizontal band saw, 1-1/4" x 15' x 0.042" blade, hydraulic vise
Sterling Machinery Exchange | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Hem
Model: H120M
Capacity 14" x 16" Blade Size 1-1/4" x 15' x 0.042" Horsepower 7 1/2 H.P. Dimensions (W x D x H) 106" x 45" x 62" s Fully Automatic Hitch Feed Hydraulic Vises E Stop For Emergency Stop & Start Situations.
14" x 17" Behringer #HBP340A, automatic horizontal band saw, 6.25 HP, chip conveyor, coolant, roller table, 480 V.
Turners Machinery Inc | Santa Paula, CA
Category: Horizontal Band Saws
Seller: Turners Machinery Inc
Location: Santa Paula, CA
Mfr: Behringer
Model: HBP340A
BEHRINGER HBP-340A AUTOMATIC BANDSAW, MAKE: BEHRINGER, TYPE: HBP 340A, S/N: 0689581, CUTTING HEIGHT: 14", CUTTING WIDTH: 17", CUTTING SPEED: 17-120 M/MIN, VOLTS: 480, POWER: 6.25 HP, EQUIPPED:, CHIP CONVEYOR, COOLANT, ROLLER TABLE, MACHINE DIMS: 116"L, X 90"W, X 80"H, APPROX WEIGHT: 5300 LBS, PRICE: $7,500.00, ** ...more
15" x 17" W.F. Wells #F-15, twin post, hydraulic BF multiple index, s/n A1089781230, #A4067
Sterling Machinery Exchange | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: W.F. Wells
Model: F-15
Coolant Capacity 10.5 Gallons Capacity: 15" x 17" WEIGHT 1,750 Lbs. Max Clearance Under Blade 16" Horsepower 3 H.P. Blade Size 1" x 0.35" x 14'-5" Blade Cutting Force Control 20 - 80 Lbs. Blade Speed (Variable) 75-300 FPM s Blade Brush Twin Post Design (1) Horizontal Hydraulic Clamp Discharge Table.
16" x 16" Amada #HFA-400W, automatic horizontal bandsaw, 180" x 1.25" x .042" blade, 50-395 FPM, hydraulic rear & front vise, 2004
TNT Industrial | Orange, CA
Category: Horizontal Band Saws
Seller: TNT Industrial
Location: Orange, CA
Mfr: Amada
Model: HFA-400W
Year: 2004
AUTOMATIC MULTI SHUTTLE. YES, UP TO 176". YEAR. 2004. HYDRAULIC HEAD LIFT. YES. BLADE SPEEDS. (5) 50 TO 395 FPM. BLADE SIZE. 180" X 1.25" X. 042"..
16" x 16" DoAll #DC420NC, fully automatic, PLC control for all electric, 7.5 HP, new, #SMDC420NC
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Doall
Model: DC420NC
Operation Automatic Capacity. Bundle Capacity Max. 14-1/2" x 7-5/8" Bundle Capacity Min. 6-1/2" x 3-1/4" Blade Speed 72 - 390 SFPM Blade Size 1-1/2" x 0.05" x 192" Material Pass Line Height 27-1/2" Automatic Indexing Lengths: Single 19.68" Multiple 177.16" Remnant Length Single Piece (Non-Bundle) Coolant Pump ...more
16" x 18" Hyd-Mech #S-23P, semi-auto horizontal mitering bandsaw, 15' 6" x 1-1/4" x .042" blade, 75-400 FPM, carbide guides, 19" wheel diameter, hydraulic clamp, 2003
Manufacturing Solutions | Santa Ana, CA
Category: Horizontal Band Saws
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Hyd-Mech
Model: S-23P
Year: 2003
18"W x 16"H (90 degrees), 13"W x 16"H (45 degrees)15'6" x 1-1/4" x.042"75-400 FMP (infinitely variable)Carbide19"5 HP31"6 gallons5,000 lbs.600V, 3 Phase (includes transformer for 220V, 3PH)81" x 71" x 66"2,300 lbs..
16" x 20" W.F. Wells #F16-1, 60-425 SFPM, variable hydraulic, 7.5 HP, 3-Phase, New
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: W.F. Wells
Model: F-16-1
Capacity 16" x 20" Operation Type Semi-Automatic 45 Degrees 45 Degree Round 9" 45 Degree Rectangle 9" x 16" 90 Degrees 90 Degree Round 16" 90 Degree Rectangle 16" x 20" Blade Speed 60 - 425 SFPM Sawing Feed Variable, Hydraulic Blade Guide Rollers & Carbide Side Blocks Blade Tension Manual with Indicator Band Wheel ...more
16" x 20" W.F. Wells #F-16-2A, semi-auto twin post horizontal bandsaw, 60-425 SPM, 20" wheel diameter
Wheeler Machinery Sales | Pomona, CA
Category: Horizontal Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: W.F. Wells
Model: F-16-2A
W.F. Wells F-16-2A Semi-Auto Twin Post Horizontal Band Saw 16" x 20" #7052 #2, Capacity: 16 x 17, Weight Capacity Saw Bed: 5,000 lbs., Weight Capacity Bar Feed: 9,000 lbs., Blade Speed: 60-425 SPM, Blade Size: 1.25 x.042 x 15, Blade Guides: Carbide w/ Backup Rollers, Blade Tension: Hydraulic, Bandwheel Size: 20 ...more
16.14" x 27.56" Meba #MEBAeco-410DGA-2300, horizontal band saw, 228.35" x 1.61" blade, 7.4 HP, 2016
JPS International Inc | Lake Forest, CA
Category: Horizontal Band Saws
Seller: JPS International Inc
Location: Lake Forest, CA
Mfr: Meba
Model: MEBAECO-410DGA-2300
Year: 2016
EquipmentHorizontal Band Saws2016 Peddinghaus MEBAeco 410 DGA-2300 Horizontal Bandsaw2016 Peddinghaus MEBAeco 410 DGA-2300 Horizontal BandsawHave one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionUsedQuantity1 availableRequest QuoteLoading.Have one to sell?Sell NowOverviewType:Horizontal Band ...more
16.5" x 28" Cosen #SH-710LDM, Horizontal Dual Column Band Saw, 257.5" length x 1.61" wide blade, 0.051" blade thickness, 7.5 HP motor, 2014
JPS International Inc | Lake Forest, CA
Category: Horizontal Band Saws
Seller: JPS International Inc
Location: Lake Forest, CA
Mfr: Cosen
Model: SH-710LDM
Year: 2014
EquipmentStructural Steel Processing LinesHorizontal Dual Column Band Saws2014 Cosen SH-710LDM Horizontal Dual Column Bandsaw2014 Cosen SH-710LDM Horizontal Dual Column BandsawHave one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionUsedQuantity1 availableRequest QuoteLoading.Have one to sell?Sell ...more
