High Speed and Automatic Presses in New Jersey

MODEL BSTA 10, STROKE 0.24" - 1.5", STROKES PER MINUTE 100 - 500, SHUT HEIGHT 6.4" @ 1.5" STROKE (SDAU) TO BOLSTER, SLIDE ADJUSTMENT 1.5" BED, (BETWEEN GUIDE POST) 8.25" X 13.38", THROAT 8.5", BOLSTER 1.5" THICK.

Rated capacity.15 tons, Stroke.1-1/2", Adjustment.1-3/4", Throat.5", Bed Area (l-r x f-b).17" x 10", Strokes Per Minute.400, Air Clutch, Flywheel Type.

Stroke.1-1/2", Adjustment.1-3/4", Strokes per minute.400, Bed area (l-r x f-b).10" x 17", AC Motor, Air Clutch, Push Button Controls, Aluminum Rams.

TONNAGE RATING 30 TON TYPE OF CLUTCH/BRAKE AIR STROKE.375" TO 1.57" SLIDE ADJ. 1.57" SHUTHEIGHT ON BOLSTER (SDAU) 8" ** (HAS SPACER SO LARGER) BOLSTER DIMENSIONS 21" X 17" MOTOR 5 HP DC SPEED OF PRESS (SPM) 0 TO 800 SPM (Speed determined by stroke & feed length) TYPE OF FEED BRUDERER BBVD 120/60 Year of Press ...more

, - 30 ton Capacity, -.5"-1.5" Stroke, - 9.17" Shut Height over Bed, - 2" Adjustment, - 20.86" LR x 20.86 FB Bed Area, - 20.86" LR x 14.17 FB Slide Area, - 100-1500 VSPM, Standard Equipment and s, - T-Slotted Bolster Plate, - Cylindrical Post Guides, - Standard Bruderer Press Control, - Hydrostatic Vari-Speed Drive, - ...more

MANUFACTURER. GASBARRE, MODEL#. VGS, TYPE. HIGH SPEED PRESS, BED. 36" x 28", SPM. 100 - 1200, STROKE. 1" CONTINUOUS/SINGLE, MOTOR. 20HP, BLACK MAX, 230-460VAC, 3HP, 60HZ, 1770-4200RPM, DIMENSIONS. 7' 9" L X 5' 8" W X 9' 11" H, WEIGHT. 19,800 APPROX, VARI SPEED, VARIAX V76 FEEDER, DUAL PALMS, LUBE SYSTEM ...more

MANUFACTURER. MINSTER, MODEL NUMBER. P2-30-24, TYPE. HIGH SPEED PRESS, BED. 24" x 19", SPM. 0 - 600, STROKE. 1.25", SHUT HEIGHT. 12.25", PA INDUSTRIES "ULTRA EDGE" #SRF100 SERVO ROLL FEED, O.A. DIMENSIONS. 5' Long X 4'2" Wide X 9'9" High, WEIGHT. 8,000 lbs.

CAPACITY. 30 TON, LENGTH OF STROKE. 1.25", SPM. 0 - 600, SHUT HEIGHT. 7.25" - 9", BOLSTER. 30" X 21", ADJUSTMENT. 1.75", EST. WEIGHT. 20,000#, O.A. DIMENSIONS. 105" X 55" X 119", MOTOR. 25 HP, 60 HZ, 230/460 VOLT 3 PHASE, 71.2 - 64.4 / 32.2 AMPS, 1765 RPM, CONTROL PANEL (48" X 25" 55"), T-SLOTTED BOLSTER 4.1" THICK, E.

ADJUSTABLE STROKE - 5/8" - 2" (16MM - 51MM), SPM - 100 - 1200, BED AREA - 34" X 20", VOLTAGE -208/230, 3 PH, 60 HZ, APPROXIMATE WEIGHT - 18,000 lbs., INCLUDES:, SPRING DAMPENING FEET, T-SLOTTED BED & RAM, BRUDERER BBV 202/120 FEED, BRUDERER CONTROLS.

60 TON BRUDERER PRECISION HIGH SPEED (4) PILLAR TYPE PUNCH PRESS MODEL BSTA60HL NEW APPROX. 1970 CAPACITY ---------------------------------- 60 TON STROKE ----- ( ADJUSTABLE ) ---------------.75" TO 3.00" ( 10 ADJUSTMENTS ) RAM ADJUSTMENT ---------------------------- 3.156" SHUT HEIGHT, RAM LDC, LOWER DEAD CENTER: ...more

60 TON BRUDERER PRECISION HIGH SPEED (4) PILLAR TYPE PUNCH PRESS MODEL BSTA60HSL (LONG BED) CAPACITY 60 TON STROKE ----- ( ADJUSTABLE ).75" TO 3.00" (10 ADJUSTMENTS) RAM ADJUSTMENT 3.156" STROKE AT 3/4" 8.5" TO 11.5" STROKE AT 3" 7.25" TO 10.5" BED AREA 36" LR X 31" FB SLIDE FACE AREA 33.5" LR X 18" FB DISTANCE ...more

MANUFACTURER. MINSTER, MODEL NUMBER. P2-60-36, TYPE. HIGH SPEED PRESS, BED. 36" x 25", SPM. 0 - 450, SHUT HEIGHT. 17.50", STROKE. 1.50", ADJUSTMENT. 3", WEIGHT. 17,400 LBS (Approx), DIMENSIONS. 8' 4" L x 5' 11" W x 9' 6" H, MOTOR. 15 HP Reliance, 230-460 VAC, 3 PH, 60 Hz, 1750 RPM, CONTROL CONSOLE.

2-1/2" Stroke, 3" Adjustment with DRO, 15-1/2" Shut Height on Bed, 36" Bed, 4" AND 2" Stacked Bolsters, 0-400 SPM Variable Speed Eddy Current, Air Clutch & Brake, Flywheel Brake, Monitor Flow Recirculating Lube System, Original Minster Controls, Wintriss Auto Set 1500 plus 2 Channel, Wintriss DiPro 1500, Barrier ...more

CAPACITY. 60 TON, LENGTH OF STROKE. 1.25", SHUT HEIGHT. 9.38" - 11.12", BOLSTER. 36" X 23", ADJUSTMENT. 1.75", RAM PLATE. 36" X 16", S.P.M. 1 - 1000, EST. WEIGHT. 25,000#, O.A. DIMENSIONS. 105" X 54" X 128", MOTOR. 30 HP, 90 VOLTS, 230/460 VOLT 3 PHASE, 78 / 39 AMPS, 1755 RPM (MIN 170, MAX 1680), LUBE SYSTEM, FLOOR ...more

MANUFACTURER. MINSTER, MODEL NUMBER. PM3-75-42, SERIAL NUMBER. PM3-75-24787, TYPE. HIGH SPEED PRESS, BED. 42" x 26", SPM. 0 - 800, SHUT HEIGHT. 28-1/2", STROKE. 1.25", ADJUSTMENT. 2", WEIGHT. 32,400 LBS (Approx), MOTOR. 30 HP, 230-460 VAC, 3 PH, 60 Hz, 1760 RPM, VARI SPEED, WINTRISS CONTROL, VAMCO TS6 ROLL FEED ...more

One Used Bruderer Model BSTA-30 3 Post High Speed Press, Serial No. N/A, 30,000 Kg Forge Tonnage, 16mm-40mm Stroke ( 15 x material thickness), 20mm-100mm Feed Length, 100-600 SPM, Jon Friedrich Behrens Roll Straightener (7"), Serial No 2178 and (3), Mechanical Roll Feed, (1) JM Eng Electric Roll Feed, FR 16M, Serial ...more

- Capacity 30 Tons, - Stroke Lengths 1/2", 5/8", 3/4",1",1-1/4", 1-1/2", - Shut Height, - Adjustment 2", - Bed Area 25.59" LR x 20.87" FB, - Slide Area 25.59" LR x 14.17" FB, - Feed BRUDERER BBV 190/85, - SPEED STROKE, - 1425 SPM 1/2", - 1275 SPM 5/8", - 1160 SPM 3/4", - 1000 SPM 1", - 860 SPM 1-1/4", - 775 SPM 1-1/2".

TONNAGE 60 TON, STROKE SPEED SHUT HEIGHT, 5/8"(16mm) 1120 9.5" TO 11.57", 3/4"(19mm) 1030 9" TO 11.51", 1"(25mm) 900 8.87" TO 11.39", 1-1/4"(32mm) 795 8.74" TO 11.39", 1-1/2"(38mm) 730 8.62" TO 11.14", 1-3/4"(44mm) 680 8.50" TO 11.02", 2" (51mm) 620 8.36" TO 10.88", BOLSTER SIZE 37.4" L-R X 25.59", FEED BBV202/120 ...more