19 Results
2.5" NRM #2-5-24, Extruder, single head, electrically heated, 2.5" diameter x 24" L plastic extruder, 40 HP, 1725/2100 RPM, 500 V
Machinery & Equipment Co | Brisbane, CA
Category: Extruders and Extrusion Lines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Nrm
Model: 2-5-24
NRM extruder, 2.5" diameter x 24" long plastics extruder, model 2-5-24.1 PM IV RH-1CANVTD, single head carbon steel extruder. Unit is electrically heated, air cooled 4 zone non-vented barrel, water reed throat with hopper. Unit is driven by 40 hp, 500 volt, 1725/2100 rpm motor. Unit includes electrical panel, serial ...more
3.5" NRM #Plastiscrew, cold feed, 12:1 L/D rubber extruder
DPA Machinery & Appraisals Llc | Ormond Beach, FL
Category: Extruders and Extrusion Lines
Seller: DPA Machinery & Appraisals Llc
Location: Akron, OH
Mfr: Nrm
Model: PLASTISCREW
NRM 3 1/2" Plastiscrew cold feed rubber extruder with swing head in good condition. 24.88 to 1 reducer. 75HP DC motor.
3.5" NRM #Profilemaster, extruder, 24:1 L/D, 60 HP, 42.5" centerline, Eurotherm 808 controller
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nrm
Model: PROFILEMASTER
Used 3.5" NRM Profilemaster Extruder, S/N: 17749, Vintage: 09/1980 24:1 L/D, Belt Driven, 16.95.1 Ratio NRM Gearbox 42.5 Centerline Height, Round Feed Throat, Air-Cooled Barrel Clamp Barrel Flange, Screw and Hopper Included 60HP DC 1750 RPM Emerson Motor Fan Cooled Emerson Spectrum Drive, 100 Amps, Eurotherm 808 ...more
3.5" NRM, cold feed rubber extruder, 12:1 L/D, 24.88:1 G/B, 75 HP, variable speed drive, 1997
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Year: 1997
One (1) NRM 3.5" 90mm Cold Feed Rubber Extruder, 12:1 L/D, 24.88:1 gearbox ratio, US Motors 75 HP 1750/2100 RPM 500 VDC motor, straight delivery head, forced lube system, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication, date 8/1997, S/N T78035.
3.5" NRM, cold feed extruder, 12:1 L/D, 75 HP, 1750 RPM, 500 VDC motor, roller feed/power feed roll, rebuilt
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Rebuilt NRM 3.5" 90mm 3 1/2" Cold Feed Rubber Extruder, 12:1 L/D, 75 HP 1750 RPM 500 VDC motor, 24.9:1 gearbox ratio, roller feed / power feed roll, approximately 14 week delivery.
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
3.5" NRM, cold feed rubber extruder, 12:1 L/D, 24.9:1 gearbox ratio, 75 HP, 1750/2100 RPM
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Used NRM 3.5" 90mm Cold Feed Rubber Extruder, 12:1 L/D, 24.9:1 G/B ratio, US Motors 75 HP DC, 1750/2100 RPM, 500 VDC motor, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication, S/N T61335.
3.5" NRM, cold feed rubber extruder, 8:1 L/D, 20.64:1 gearbox ratio, 50 HP, 1750/2100 RPM
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) NRM 3.5" 90mm Cold Feed Rubber Extruder, 8:1 L/D, 20.64:1 gearbox ratio, Reliance 50 HP 1750/2100 RPM 500 VDC motor, straight delivery head, forced lube system, non-power feed roll type, S/N T37835.
4.5" NRM, cold feed rubber extruder, 12:1 L/D, 25.14:1 G/B ratio, 75 HP, 1750/2100 RPM, 500 VDC
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Item 6064 - One (1) Used NRM 4.5" 120mm Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, Reliance 75 HP, 1750/2100 RPM, 500 VDC motor, missing feed roll assembly.
JUST ADDED!
4.5" NRM, single screw extruder, 34:1 L/D, 300 HP DC motor, 6 barrel zones, 6 downstream zones, air cooled vented barrel, 1976
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nrm
Year: 1976
Used 4.5" NRM Single Screw Extruder, 34:1 L/D, 300 HP DC Motor With Blower Air Cooled Vented Barrel, 6 Barrel Zones, 6 Downstream Zones 9" x 13" Tangential Jacketed Water Cooled Feed Throat With Metal Separator Approx. 41" Centerline Height 300 HP DC Motor 500V, 536A STATOHM Model: DC42NM-3-4 DC Drive Rated For ...more
4.5" NRM, cold feed rubber extruder, 17:1 L/D, 125 HP DC, roller feed, rebuilt
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Rebuilt NRM 4.5" 120mm 4 1/2" Cold Feed Rubber Extruder, 17:1 L/D, 125 HP DC 1150/2000RPM 500V motor, Kwik clamp head, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
4.5" NRM, cold feed rubber extruder, 12.1 L/D, 30.30:1 G/B ratio, 125 HP DC, roller feed
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Used NRM 4.5" 120mm 4 1/2" Cold Feed Rubber Extruder, 12:1 L/D, 30.30:1 G/B ratio, 125 HP DC motor, no head, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
4.5" NRM, cold feed rubber extruder, 12:1 L/D, 24.68:1 G/B ratio, 100 HP DC, roller feed
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Used NRM 4.5" 120mm 4 1/2" Cold Feed Rubber Extruder, 12:1 L/D, 24.68:1 G/B ratio, 100 HP DC motor, rPFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
4.5" NRM, cold feed rubber extruder, 12:1 L/D, 125 HP, 1200 RPM, straight delivery head
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Used NRM 4.5" 120mm Cold Feed Rubber Extruder, 12:1 L/D, Reliance 125 HP, 1200 RPM, 500 VDC motor, straight delivery head, hinge assembly, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
4.5" NRM rubber extruder, 120mm, cold feed 12:1, 100 HP DC, roller feed, rebuilt
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Rebuilt NRM 4.5" 120mm 4 1/2" Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, 100 HP DC, 1150/2000 RPM, 550 V motor, clamp type head, roller feed / power feed roll, approximately 14 week delivery.
6" NRM, hot feed rubber extruder, 20.5:1 G/B ratio, 100 HP DC, 500 V., 1980
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Year: 1980
One (1) Used 6" NRM Hot Feed Rubber Extruder, Motor Reliance 100 HP DC, 500 volt, 1750/2000 rpm, Gearbox ratio 20.5:1, Date 3-80, Order 107982-02, S/N 28160.
8" NRM, hot feed rubber extruder, right hand feed, 20.5:1 G/B ratio, unitized base, 1974
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Year: 1974
One (1) Used 8" NRM Hot Feed Extruder, right hand feed, pneumatically adjustable sheet head, GB ratio 20.5:1, unitized base, date 12-74, Order 104353, S/N T-18580.
JUST ADDED!
NRM #Pacemaker-III, Extruder, 16.95:1 Ratio, 1973
HGR24 | Euclid, OH
Category: Extruders and Extrusion Lines
Seller: HGR24
Location: Euclid, OH
Mfr: Nrm
Model: PACEMAKER-III
Year: 1973
Inventory No. 0726-036-0004 Manufacturer Nrm Corporation Model No. PACEMAKER III Name Extruder Arrival Date 07-27-2026 Dimensions L x W x H (inches) 120 x 50 x 90 Weight (lb.) 4594 Category Plastics Condition Used Available Quantity 1 Serial No. 15159 Make Year 1973 Item Ratio: 16.95.1, (4550# 94x34x75), (44# ...more
JUST ADDED!
NRM single screw extruder, 34:1 L/D, air cooled, vented, 300 HP DC motor
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nrm
Used NRM Extruder Single Screw Extruder for Sale. This NRM single screw extruder has a 34:1 L/D ratio and is both air cooled and vented. Drive is a 300 HP DC motor and drive package, with Temco digital temperature controllers handling zone control. Power requirement is 460v – 3 ph – 60hz. The machine can ...more
Kevin Dunn and Jim Hay Sinclair and Rush, extruder
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nrm
Used 2.5” NRM PM III Extruder, 24:1 L/D, 40 HP AC Motor Single Screw, Air Cooled, Non-Vented, 4 Barrel Zones, 4 Die Zones Feed Throat: 3.5" x 3.5", Water Cooled 40 HP Baldor Reliance Inverter-Duty AC Motor, Model: IDM411OT, S/N: C1505270957 460/3/60, 47A 1775 RPM, Max RPM: 3900 Frame: 324T NRM Gearbox, Gear ...more
