Extruders and Extrusion Lines in New Jersey

Used 1.25" Wayne Single-Screw Extruder, 30:1 L/D, Serial: 9414-832, Year: 1982, Barrel: vented (plugged), electrically heated, air cooled, Driven by a 7.5 hp DC motor with SCR control,230 volt, Additional information: includes temperature control panel, track wheels, and spare screw., Location: On Site at Perry ...more

Used 1.5" Killion Single-Screw Extruder, 24:1 L/D, Model: KL-150, Serial: 10628, Includes: (3) control panels, Zenith melt pump with 2 hp motor. Model PEP-10 rated at 3.4-68 lbs/hr spare grooved feed throat, and (2) transformers, miscellaneous parts., Additional information: the Killion extruder was custom designed to ...more

Used 2.5" 24/1 L/D American Kuhne air cooled single screw Extruder. Serial #3846, new 2004. Barrel is standard height 42" centerline. Driven by a 29kw (40hp) motor and Yaskawa F7 VFD drive. 17.53/1 Kohlmann gearbox rated at 75 hp. Has Gefren Model 600 temperature controllers. 460 volt AC input., Location: Western USA.

Used 3.5" 24/1 L/D HPM non-vented Extruder. Model 3.5TMC-24, serial #93182. new 1994. Has electrically heated, air cooled, barrel. Belt driven by a 75 hp brushless DC motor with controls. Flender Gearbox type SZNE-250 with a reduction ratio of approximately 13.88/1 rated for up 157 hp. Includes unitized temperature ...more

Used 4.5" HPM Single Screw Extruder, 30/1 L/D, Model: TMIII, Serial: 95070, Year: 1995, Barrel: vented (plugged), electrically heated, water cooled, 6" x 6" top center feed throat, Driven by a 250 hp DC motor, 460 volt AC input and a Powertec motor control with 460 volt 50/60 Hz AC input. Gearbox: Lufkin gear reducer ...more

Used 10" wide Brabender blown film tower and nip roll assembly. Includes single position winder. Tower is 80" tall., Location: On Site at Perry (Hainesport, NJ - USA).

Used 8" Buss Hot Melt Single-Screw Extruder and Pelletizing System, 6:1 L/D, Model: MDS200-4, Serial: 99/410820, Year: 1999, Screw is water heated/cooled, Barrel: 3-zone, oil heated, oil cooled, Direct driven by a 100 hp DC motor, volt, rpm, Includes: Buss Hot Cut Pelletizer Model PVW200 with oil heated/cooled die ...more

Used EDI Ultraflow Co-Extrusion Block. Serial #92-14473, new 1992., Location: On Site at Perry (Hainesport, NJ - USA).

Keifel model CA4 40mm 24:1 L/D lowboy extrusion blown film line consisting of:, A) Extruder having an electrically heated, air-cooled barrel. A second complete barrel, screw, and heaters are included to convert the machine to a 30:1 L/D ratio. Gearbox is belt driven by a 30 HP Reliance D/C motor with SCR control. ...more

Used 30mm Leistritz counter-rotating twin screw extruder, 42/1 L/D vented barrel. New 1987. Has 11kw motor, 2200 rpm, 422 volt input. Gearbox rated at 13.5kw at 60hz. Barrel is electrically heated and air cooled and includes operator control panel., Location: On Site at Perry (Hainesport, NJ - USA).

Used 53mm NFM Welding Engineers side feed extruder with no barrel or screws. Has Koellmann gearbox, size CG14-0-201, serial #1227336/1, with 5.06/1 ratio, service factor 1.0, input rpm 1750, output rpm 350, rating 3.15 hp. Driven by a 2 hp motor, 460 volt. On caster mounted cart. No controls included., Location: On ...more

Used 2" O.D. x 8" Wide Randcastle Sheet Extrusion 3-Roll Stack including Pull Roll Station and Single Position Winder., Location: Northeast USA.

Used 20mm Werner & Pfleiderer model ZSK20 co-rotating twin screw extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft. Extruder is powered by 5 hp AC motor with Allen Bradley 1336 impact drive unit, 588 rpm screw speed. Includes ...more

Used 83 mm Werner & Pfleiderer Co-Rotating Twin Screw Extruder, 36/1 L/D barrel, driven by 200 hp dc motor with SCR control, Temperature control panel, No side feeder, Serial #136255, Click on the link below to see a video of the machine running., Location: On Site at Perry (Hainesport, NJ - USA).