go to top
Surplus Record logo
Trusted Since 1924
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠
Machinery & Equipment / Plastic and Rubber Machinery and Equipment / Extruders and Extrusion Lines
Create Alert

Extruders and Extrusion Lines

warning
1 - 50 of 284 listings
View All Listings
1/4" Brabender extruder, elec.heated, air cooled barrel, 48:1 L/D, 2 HP, 180 V., VFD, controls on frame

1/4" Brabender extruder, elec.heated, air cooled barrel, 48:1 L/D, 2 HP, 180 V., VFD, controls on frame, #49243

Federal Equipment Company | Cleveland, OH
866-74... (Show) 866-740-5490
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Brabender
Model: 49243
Used 0.25" Brabender extruder, electrically heated, air cooled barrel, 48:1 L/D, driven by 2 hp, 180 volt motor with VFD, controls on frame.
View Details
8 Photos
1/4" Davis Standard Killion tubing extrusion line, 24:1 L/D, 3 zone electrically heated

1/4" Davis Standard Killion tubing extrusion line, 24:1 L/D, 3 zone electrically heated

Blades Machinery Co Inc | Elk Grove Village, IL
847-43... (Show) 847-439-2126
Category: Extruders and Extrusion Lines
Seller: Blades Machinery Co Inc
Location: Elk Grove Village, IL
Mfr: Davis Standard
Davis Standard 1/4 tubing extrusion line including the following equipment:, A. Davis Standard / Killion model KN-100 1.00 24:1 L/D extruder having a three (3) zone electrically heated, air cooled non-vented barrel at approximately a 39 centerline height. Gearbox is belt driven by a 3 HP D/C motor with SCR control. ...more
View Details
10 Photos
.47" Steer Engineering #Omicron-12P, Co-Rotating Twin Screw Extruder, Pharmaceutical Grade, Stainless Steel

.47" Steer Engineering #Omicron-12P, Co-Rotating Twin Screw Extruder, Pharmaceutical Grade, Stainless Steel, 300°C max Temp., 900 RPM, 2 HP, 480 V, 2014

Perry Videx LLC | Hainesport, NJ
609-26... (Show) 609-267-1600
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Steer Engineering
Model: OMICRON 12P
Year: 2014
Used 12mm 45/1 L/D Steer Engineering co-rotating twin screw extruder with chrome plated steel screws and barrel. Model Omicron 12P, serial #EA00427, new 2014. Driven by a 2 HP, 480 volt/3/60 motor. Includes control panel and motor drive. Maximum screw speed is 900 RPM. Maximum design temperature of 300 degrees ...more
View Details
10 Photos
.7" Leistritz #Micro-18, co-rotating twin screw extruder, 28:1 L/D, Mistic PLC controller, 42" centerline

.7" Leistritz #Micro-18, co-rotating twin screw extruder, 28:1 L/D, Mistic PLC controller, 42" centerline, 1994

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Model: MICRO-18
Year: 1994
Used 18mm Leistritz Micro-18 Co-Rotating Twin Screw Extruder 500 RPM Screw Speed Approx. 28:1 L/D 6 Barrel Segments, Top Ports In Segments 1, 2, and 6 6 Barrel Zones Controlled By Eurotherm 808 Temperature Controllers Lenze 2.3 KW(3.1HP) 2950 RPM DC Motor Parker 512C DC Drive Mistic PLC Controller 42" Centerline, On ...more
View Details
10 Photos Video
.75" APV Baker #MP-19-TC, Twin Screw Extruder, 25:1 L/D, water cooled split barrel, 500 RPM screw, Control

.75" APV Baker #MP-19-TC, Twin Screw Extruder, 25:1 L/D, water cooled split barrel, 500 RPM screw, Control, 1997, AS IS

Federal Equipment Company | Cleveland, OH
866-74... (Show) 866-740-5490
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Baker
Model: MP-19-TC
Year: 1997
Used 19 MM APV Baker Perkins twin screw co rotating extruder, model MP-19-TC, 19 mm diameter screws, 25:1 l/d, electrically heated, water cooled barrel, split barrel design, 2 kw dc motor, 500 rpm screw speed, external control panel, 220 volt, serial# NEF980003 701/1, built 1997. Unit is less Screw set.
View Details
8 Photos

Get email updates for newly added Extruders and Extrusion Lines

New Listing Alert

Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.

3/4" Brabender #2503, Extruder, 25:1 L/D, electrically heated, 3 barrel zones, 1 die zone, 3 hp motor, with

3/4" Brabender #2503, Extruder, 25:1 L/D, electrically heated, 3 barrel zones, 1 die zone, 3 hp motor, with control panel, 230 V.

Federal Equipment Company | Cleveland, OH
866-74... (Show) 866-740-5490
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Brabender
Model: 2503
Used 0.75" Brabender extruder, model 2503, 25:1 l/d, electrically heated, 3 barrel zones, 1 die zone, 3 hp motor, with control panel, 230 volt, serial# 1313.
View Details
8 Photos
.79" Theysohn #TSK-TT 020/28D, twin screw extruder, 28:1 L/D ratio, 2000, #18999A

.79" Theysohn #TSK-TT 020/28D, twin screw extruder, 28:1 L/D ratio, 2000, #18999A

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Theysohn
Model: TSK-TT 020/28D
Year: 2000
Used 20mm Theysohn Co-rotating Twin Screw Extruder, Model TSK-TT 020/28D, 28:1 L/D Ratio, 3.75 KW Main Motor, 1,750 RPM, 2.79:1 Gearbox Ratio, Water Cooled Barrel, 5 Temperature Control Zones, 4 Barrel, One Die, Amp Meters For Each Zone, Amp Meter, RPM Gauge, Vent Section, Strand Die, Comes With Material Feeder, With ...more
View Details
10 Photos
.98" Haake (ThermoFisher, Thermo Electron) #PTW25/36, twin screw extruder, 36.1 ratio, stand

.98" Haake (ThermoFisher, Thermo Electron) #PTW25/36, twin screw extruder, 36.1 ratio, stand

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Instron
Model: PTW25/36
Used Haake (ThermoFisher, Thermo Electron) PTW25/36 Twin Screw Extruder Parallel, segmented, corotating twin screw extruder for compounding, blending polymers Screw – 25 mm diameter, L/D ratio 36.1 Output – 15 kg/hr Melt temperature – 5 channels; Melt pressure – 7 channels Temperature Control ...more
View Details
9 Photos
.98" Krupp Werner #ZSK-25, extruder, 36:1 L/D, puller, side feeder, 9 barrel segments, 5 temp Control zones

.98" Krupp Werner #ZSK-25, extruder, 36:1 L/D, puller, side feeder, 9 barrel segments, 5 temp Control zones, Allen Bradley PowerFlex 755 AC VFD, 5 Eurotherm 2216e temp Control, 1998

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Werner & Pfleiderer
Model: ZSK-25
Year: 1998
Used 25mm Krupp Werner ZSK-25 Twin Screw Extruder, L/D: 36:1, 1998 9 Barrel Segments, Barrel Vents in Zone 6 & 8 5 Temperature Control Zones Infeed Height: 48" 2" x 2" Square Feed Throat 1120 Screw RPM 40 HP Siemens VFD Duty Spindle Style Motor, Type:1PH8133 1HG03 2BA1 480/3/60, 41.0 A, 25.0 kW (33.5 HP), 94.7 Hz ...more
View Details
10 Photos Video
0.75" clock wise Brabender #2503, Extruder, 25:1 L/D, 3 barrel zone, 3 HP, 230 V., Control panel

0.75" clock wise Brabender #2503, Extruder, 25:1 L/D, 3 barrel zone, 3 HP, 230 V., Control panel

HGR24 | Euclid, OH
216-48... (Show) 216-485-2976
Category: Extruders and Extrusion Lines
Seller: HGR24
Location: Euclid, OH
Mfr: Brabender
Model: 2503
Inventory No. 0723-019-0002 Manufacturer C.w. Brabender Model No. 2503 Name Extruder Arrival Date 07-11-2023 Dimensions L x W x H (inches) 65 x 32 x 75 Electrical 1/60/230 Weight (lb.) 1 Category Plastics Condition Used Available Quantity 1 Item Used 0.75" Brabender Extruder, Model 2503, 25:1 L/d, Electrically Heated ...more
View Details
10 Photos
1" American Kuhne, extruder, 24:1 L/D ratio, 42" centerline, rectangular feed throat, Eurotherm 3208 temp

1" American Kuhne, extruder, 24:1 L/D ratio, 42" centerline, rectangular feed throat, Eurotherm 3208 temp controller, 2010

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Model: AK100
Year: 2010
Used 1.0” American Kuhne Extruder, 24:1 L/D Ratio 17.88:1 Koellmann UNEX 1.0 Gearbox, Rated To 10 HP 42” Centerline Rectangular Feed Throat Air-Cooled Barrel, 3 Barrel Zones, 3 Die Zones Barrel Clamp Is Not Complete – Top Half Missing DOES NOT INCLUDE SCREW 3 HP Marathon Blackmax Motor With ...more
View Details
2 Photos
1" American Kuhne, extruder, 24:1 L/D ratio, 42" centerline, rectangular feed throat, Eurotherm 3208 temp

1" American Kuhne, extruder, 24:1 L/D ratio, 42" centerline, rectangular feed throat, Eurotherm 3208 temp controller, 2011

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Model: AK100
Year: 2011
Used 1.0” American Kuhne Extruder, 24:1 L/D Ratio 17.88:1 Koellmann UNEX 1.0 Gearbox, Rated To 10 HP 42” Centerline Rectangular Feed Throat Air-Cooled Barrel, 3 Barrel Zones, 3 Die Zones Barrel Clamp Includes Screw 3 HP Marathon Blackmax Motor With Allen-Bradley Powerflex 700 AC Inverter Drive 30 AMP Main ...more
View Details
1 Photo Video
1" American Kuhne, extruder, 24:1 L/D ratio, 42" centerline, Eurotherm 3208 temperature controller, 2013

1" American Kuhne, extruder, 24:1 L/D ratio, 42" centerline, Eurotherm 3208 temperature controller, 2013

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Year: 2013
Used 1.0” American Kuhne Extruder, 24:1 L/D Ratio 17.88:1 Koellmann UNEX 1.0 Gearbox, Rated To 10 HP 42” Centerline 2.5” L x 2.0” W Rectangular Feed Throat Air-Cooled Barrel, 3 Barrel Zones, 3 Die Zones Barrel Clamp Includes Screw 5 HP Marathon Blackmax Motor With Allen-Bradley Powerflex 753 AC ...more
View Details
1 Photo Video
1" American Kuhne, extruder, 24:1 L/D ratio, 42" centerline, Eurotherm 3208 temperature controller, 2013

1" American Kuhne, extruder, 24:1 L/D ratio, 42" centerline, Eurotherm 3208 temperature controller, 2013

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Year: 2013
Used 1.0” American Kuhne Extruder, 30:1 L/D Ratio 17.88:1 Koellmann UNEX 1.0 Gearbox, Rated To 10 HP 42” Centerline 2.5” L x 2.0” W Rectangular Feed Throat Air-Cooled Barrel, 4 Barrel Zones, 3 Die Zones Barrel Clamp Includes Screw 5 HP Marathon Blackmax Motor With Allen-Bradley Powerflex 753 AC ...more
View Details
3 Photos
1" American Kuhne, extruder, 24:1 L/D ratio, 42" centerline, rectangular feed throat, Eurotherm 3208 temp

1" American Kuhne, extruder, 24:1 L/D ratio, 42" centerline, rectangular feed throat, Eurotherm 3208 temp controller, 2013

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Year: 2013
Used 1.0” American Kuhne Extruder, 24:1 L/D Ratio 17.88:1 Koellmann UNEX 1.0 Gearbox, Rated To 10 HP 42” Centerline Rectangular Feed Throat Air-Cooled Barrel, 3 Barrel Zones, 3 Die Zones Barrel Clamp Is Not Complete – Top Half Missing Includes Screw 3 HP Marathon Blackmax Motor With Allen-Bradley ...more
View Details
2 Photos Video
1" Wayne, lab monofilament extrusion line, auxiliary cast roll station, 30:1 L/D ratio, 42" centerline

1" Wayne, lab monofilament extrusion line, auxiliary cast roll station, 30:1 L/D ratio, 42" centerline

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Wayne
Used Wayne Lab Monofilament Extrusion Line With Auxiliary Cast Roll Station 1" Wayne Extruder, 30:1 L/D Ratio, Vented Barrel, Air- Cooled Barrel, 3 HP AC Motor With Belt Drive, Controlled With WEG Vector Duty Drive, 4 Barrel Zones Air Cooled, 6 Die Zones, With Melt Temp, Extruder RPM, And Motor Load, Has Gefran ...more
View Details
10 Photos Video
1.25" American Kuhne, extruder, 30:1 L/D ratio, 42" centerline, rectangular feed throat, Eurotherm 3208 temp

1.25" American Kuhne, extruder, 30:1 L/D ratio, 42" centerline, rectangular feed throat, Eurotherm 3208 temp controller, 2014

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Model: 125
Year: 2014
Used 1.25” American Kuhne Extruder, 30:1 L/D Ratio 17.54:1 Koellmann UNEX 1.1 Gearbox, Rated To 15 HP 42” Centerline Rectangular Feed Throat Air-Cooled Barrel, 4 Barrel Zones, 4 Die Zones Barrel Clamp Includes Screw 10 HP Marathon Blackmax Motor With Allen-Bradley Powerflex 753 AC Inverter Drive 60 AMP ...more
View Details
3 Photos Video
Click to Request Photos From Seller about 1.25" American Kuhne #AK125, extruder, 30:1 L/D ratio, 42" centerline, rectangular feed throat, Eurotherm

1.25" American Kuhne #AK125, extruder, 30:1 L/D ratio, 42" centerline, rectangular feed throat, Eurotherm 3208 temp controller, 2014

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Model: AK125
Year: 2014
Used 1.25” American Kuhne Extruder, 30:1 L/D Ratio 17.54:1 Koellmann UNEX 1.1 Gearbox, Rated To 15 HP 42” Centerline Rectangular Feed Throat Air-Cooled Barrel, 4 Barrel Zones, 4 Die Zones Barrel Clamp Includes Screw 10 HP Marathon Blackmax Motor With Allen-Bradley Powerflex 753 AC Inverter Drive 60 AMP ...more
View Details
Video
1.25" American Kuhne, extruder, 30:1 L/D ratio, 42" centerline, rectangular feed throat, Eurotherm 3208 temp

1.25" American Kuhne, extruder, 30:1 L/D ratio, 42" centerline, rectangular feed throat, Eurotherm 3208 temp controller, 2014

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Model: AK125
Year: 2014
Used 1.25” American Kuhne Extruder, 30:1 L/D Ratio 17.54:1 Koellmann UNEX 1.1 Gearbox, Rated To 15 HP 42” Centerline Rectangular Feed Throat Air-Cooled Barrel, 4 Barrel Zones, 4 Die Zones Barrel Clamp Includes Screw 10 HP Marathon Blackmax Motor With Allen-Bradley Powerflex 753 AC Inverter Drive 60 AMP ...more
View Details
6 Photos Video
1.25" American Kuhne, extruder, 30:1 L/D ratio, 42" centerline, Eurotherm 3208 temperatur controller, 2014

1.25" American Kuhne, extruder, 30:1 L/D ratio, 42" centerline, Eurotherm 3208 temperatur controller, 2014

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Year: 2014
Used 1.25” American Kuhne Extruder, 30:1 L/D Ratio 17.54:1 Koellmann UNEX 1.1 Gearbox, Rated To 15 HP 42” Centerline Rectangular Feed Throat Air-Cooled Barrel, 4 Barrel Zones, 4 Die Zones Barrel Clamp Includes Screw 10 HP Marathon Blackmax Motor With Allen-Bradley Powerflex 753 AC Inverter Drive 60 AMP ...more
View Details
3 Photos Video
JUST ADDED!
1.25" Davis Standard #DS-125, pedestal extruder, 24:1 L/D, 15:1 gearbox ratio, 5 HP, rebuilt screw

1.25" Davis Standard #DS-125, pedestal extruder, 24:1 L/D, 15:1 gearbox ratio, 5 HP, rebuilt screw

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: DS-125
Used 1.25” Davis Standard Pedestal Extruder. 24:1 L/D 15:1 Gearbox Ratio 5 HP Reliance DC Motor, Statohm 5 DC Drive 3 Barrel Zones, 1 Clamp Zone, 2 Die Zones Rebuilt Screw.
View Details
10 Photos
1.25" Davis Standard #DS-125, plastic extruder, 24:1 L/D, 15:1 G/B ratio, 5 HP DC motor, 1991

1.25" Davis Standard #DS-125, plastic extruder, 24:1 L/D, 15:1 G/B ratio, 5 HP DC motor, 1991

Soberay & Sons Ltd | Cleveland, OH
216-33... (Show) 216-334-2003
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Model: DS-125
Year: 1991
Item 6519 - One (1) Used 1.25" 32mm Plastic Extruder, Model DS-125, 24:1 L/D ratio, 5 HP DC Motor, Gearbox ratio 15:1, S/N L8345, Date 1991.
View Details
8 Photos
1.25" Davis Standard #Pedestal extruder, air cooled, 36:1 L/D vented barrel, 2001

1.25" Davis Standard #Pedestal extruder, air cooled, 36:1 L/D vented barrel, 2001

Perry Videx LLC | Hainesport, NJ
609-26... (Show) 609-267-1600
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Davis Standard
Model: PEDESTAL
Year: 2001
Used 1.25" Davis Standard Pedestal Extruder With 36/1 L/D Vented Barrel., New 2001. Has electrically heated air cooled barrel, includes temperature control panel and 5 hp AC motor, 230/460 volt., Previously used as co-extruder on laboratory sheet extrusion line., 2001 DAVIS STANDARD PEDESTAL.
View Details
7 Photos
1.25" Wayne, 30:1 L/D vented (plugged) extruder, electric heated air cooled barrel, 1982

1.25" Wayne, 30:1 L/D vented (plugged) extruder, electric heated air cooled barrel, 1982

Perry Videx LLC | Hainesport, NJ
609-26... (Show) 609-267-1600
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Wayne
Year: 1982
Used 1.25 Wayne Single-Screw Extruder, 30:1 L/D, Serial: 9414-832, Year: 1982, Barrel: vented (plugged), electrically heated, air cooled, Driven by a 7.5 hp DC motor with SCR control,230 volt, Additional information: includes temperature control panel, track wheels, and spare screw., 1982 WAYNE 1.25".
View Details
10 Photos
1.3" Theysohn, twin screw extruder, 36:1 L/D ratio, water cooled barrel, 500 RPM screw, 60 HP dc motor

1.3" Theysohn, twin screw extruder, 36:1 L/D ratio, water cooled barrel, 500 RPM screw, 60 HP dc motor, controls

Federal Equipment Company | Cleveland, OH
866-74... (Show) 866-740-5490
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Used 45mm Theysohn Twin Screw Extruder, model TSK-N-045, co rotating screw, 36:1 L/D ratio, electrically heated, water cooled barrel, (1) feed, (2) top and side vented, (1) top vented, (5) non-vented barrel sections, 500 rpm screw speed, 60 HP dc motor with controller, control panel with (8) barrel zones, (1) die zone ...more
View Details
8 Photos
1.5" American Kuhne #AK150, extruder, 30:1 L/D ratio, 42" centerline, rectangular feed throat, Barber Coleman

1.5" American Kuhne #AK150, extruder, 30:1 L/D ratio, 42" centerline, rectangular feed throat, Barber Coleman 7EF temp controller, 2004

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Model: AK 150
Year: 2004
Used 1.50” American Kuhne Extruder, 24:1 L/D Ratio 17.54:1 Koellmann UNEX 1.1 Gearbox, Rated To 15 HP 42” Centerline Rectangular Feed Throat Air-Cooled Barrel, 4 Barrel Zones, 4 Die Zones Barrel Clamp Includes Screw 10 HP Marathon Blackmax Motor With Yaskawa F7 AC Inverter Drive 60 AMP Main Disconnect ...more
View Details
2 Photos Video
1.5" Davis Standard #1.5", non vented air cooled extruder, 28:1 L/D vented barrel, 15 HP DC motor, 1989

1.5" Davis Standard #1.5", non vented air cooled extruder, 28:1 L/D vented barrel, 15 HP DC motor, 1989

Perry Videx LLC | Hainesport, NJ
609-26... (Show) 609-267-1600
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Davis Standard
Model: 1.5
Year: 1989
Used 1.5" Davis Standard 28/1 L/D Non-Vented Air Cooled Extruder., New in 1989. 6.53/1 gearbox ratio. Gearbox is belt driven through a 15 hp DC motor. Includes temperature control panel with motor drive., Previously used as co-extruder for laboratory sheet extrusion line., DAVIS STANDARD 1.5".
View Details
8 Photos
1.5" Davis Standard #150IN-DS-20, Single Screw Extruder, 24:1 L/D, Vented Barrel, 50 HP Gearbox, 42"

1.5" Davis Standard #150IN-DS-20, Single Screw Extruder, 24:1 L/D, Vented Barrel, 50 HP Gearbox, 42" centerline, 152 RPM screw, 1984

Aaron Equipment Co | Schaumburg, IL
708-41... (Show) 708-412-6077
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Davis Standard
Model: 150IN-DS-20
Year: 1984
used- davis standard 1.5" extruder, model 150in ds-20. 24:1 l/d vented barrel at a 42" centerline. davis standard 6.53:1 gearbox rated for 50 hp with a service factor of 1.25 for a 152 rpm screw speed. gearbox was manufactured in 1998. non-tagged motor is driven by a reliance model gv3000 a/c drive. includes unitized ...more
View Details
8 Photos
1.5" Davis Standard #150IN-DS-20, 24:1 L/D, vented barrel, elec.heated, air cooled, 1984

1.5" Davis Standard #150IN-DS-20, 24:1 L/D, vented barrel, elec.heated, air cooled, 1984

Perry Videx LLC | Hainesport, NJ
609-26... (Show) 609-267-1600
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Davis Standard
Model: 150IN-DS-20
Year: 1984
Used 1.5 Davis Standard Vented Single-Screw Extruder, 24:1 L/D, Model: 150IN DS-20, Serial: J6173, Year: 1984, Barrel: vented, electrically heated, air cooled (blowers missing), 42 centerline height, Driven by a nontagged motor and a Reliance model GV3000 AC drive, Gearbox: 6.53:1 ratio, rated for 50 hp, 1.25 service ...more
View Details
10 Photos
1.5" Davis Standard, pedestal extruder, 30:1 L/D, 7.5 HP DC motor w/ blower, 42.5" centerline, Fr.C1811ATZ

1.5" Davis Standard, pedestal extruder, 30:1 L/D, 7.5 HP DC motor w/ blower, 42.5" centerline, Fr.C1811ATZ, die clamp, on casters

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Used 1.5" Davis Standard Pedestal Extruder, 30:1 L/D, 7.5 HP DC Motor With Blower 2 Downstream Zones, 4 Barrel Zones, Air Cooled Barrel 42.5" Centerline Height 7.5 HP Reliance RPM III DC Motor, Identification # T8R1301T-PY 1750/2300 RPM 240/3/60, 28A Frame: C1811ATZ Drip Proof Enclosure Stab Shunt Winding With 1/3 HP ...more
View Details
10 Photos Video
1.5" Killion #KL-150, extruder, 24:1 L/D, 3 control panels, Zenith melt pump w/2 HP motor

1.5" Killion #KL-150, extruder, 24:1 L/D, 3 control panels, Zenith melt pump w/2 HP motor

Perry Videx LLC | Hainesport, NJ
609-26... (Show) 609-267-1600
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Killion
Model: KL-150
Used 1.5 Killion Single-Screw Extruder, 24:1 L/D, Model: KL-150, Serial: 10628, Includes: (3) control panels, Zenith melt pump with 2 hp motor. Model PEP-10 rated at 3.4-68 lbs/hr spare grooved feed throat, and (2) transformers, miscellaneous parts., Additional information: the Killion extruder was custom designed to ...more
View Details
10 Photos
JUST ADDED!
1.5" Killion #KN-150, single screw extruder, 30:1 L/D, 15 HP DC motor w/blower, 4 barrel zones, air cooled

1.5" Killion #KN-150, single screw extruder, 30:1 L/D, 15 HP DC motor w/blower, 4 barrel zones, air cooled

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Killion
Model: KN-150
Used 1.5" Killion Single Screw Extruder, Model KN-150, 30:1 L/D, 15 HP 4 Barrel Zones (Plugged), 3 Downstream Zones, Air Cooled Standard Single Stage Screw 48" Centerline Height 2.5" x 3" Feed Throat w/ Slide Plate Infeed Height: 74" 15 HP DC Motor w/ Blower 1750 RPM 500 Volt, 26.5A Frame: 257 Shunt Winding ...more
View Details
10 Photos
1.5" Killion #KN-150, extrusion line, 24:1 L/D, 15 HP, electric heat, air cooled, 1750 RPM, 11.2:1 gearbox

1.5" Killion #KN-150, extrusion line, 24:1 L/D, 15 HP, electric heat, air cooled, 1750 RPM, 11.2:1 gearbox, Stainless Steel vacuum tank, 130" cooling tank, 1991

Federal Equipment Company | Cleveland, OH
866-74... (Show) 866-740-5490
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Killion
Model: KN-150
Year: 1991
Used 1.5" Killion extruder, model KN-150, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed section, 15 hp, 1750 rpm dc motor, 11.2:1 gearbox ratio, Cross head coating die, 115" Killion vacuum tank, model PVT2-6-1-1, stainless steel construction, approximately 6.5" x 6.5" cross section, 130" Killion ...more
View Details
8 Photos
1.5" Polytruder Extruder #9VK 215THTL7726ET L, 24:1 L/D Ratio, 10 HP AC motor, Fr.215TC, 48" centerline

1.5" Polytruder Extruder #9VK 215THTL7726ET L, 24:1 L/D Ratio, 10 HP AC motor, Fr.215TC, 48" centerline

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Polytruder
Model: 9VK
Used 1.5" Polytruder Extruder 24:1 L/D Ratio, 10 HP AC Motor Unknown Gearbox Ratio, Air-Cooled Barrel 10 HP Marathon Black Max AC Inverter Duty Motor, 215TC Frame Model: 9VK 215THTL7726ET L 460/3/60, 13.5A 1774 RPM, 29.5 Lb/Ft Torque ABB ACS 600 AC Inverter Drive 3 Barrel Zones, 1 Die Zone Control Plane With Athena ...more
View Details
10 Photos
1.5" UFS United Feed Screws, cold feed rubber extruder, 20:1 L/D, 14.5:1 G/B ratio, forced lube system

1.5" UFS United Feed Screws, cold feed rubber extruder, 20:1 L/D, 14.5:1 G/B ratio, forced lube system

Soberay & Sons Ltd | Cleveland, OH
216-33... (Show) 216-334-2003
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: United Feed Screws
Item 6006-1 - One (1) UFS United Feed Screws 1.5" 38mm Cold Feed Rubber Extruder, 20:1 L/D, 14.5:1 G/B ratio, Siemens 20 HP 1755 RPM 460 VAC motor, AC VFD variable frequency drive, control panel, clamp assembly, forced lube system, individually driven roller feeder assembly, feed roller external bearings and ...more
View Details
8 Photos
1.57" Coperion #Mega-40, co-rotating twin screw extruder, 200 HP, Powerflight VFD Control, 2008

1.57" Coperion #Mega-40, co-rotating twin screw extruder, 200 HP, Powerflight VFD Control, 2008

Perry Videx LLC | Hainesport, NJ
609-26... (Show) 609-267-1600
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Coperion
Model: MEGA-40
Year: 2008
Used 40mm Coperion Mega 40 co-rotating twin screw extruder. New 2008. No barrels or screws included. Driven by 200 hp AC motor, 1790 rpm, with Powerflight VFD controller. Has 1.155 gear ratio supplying 1200 rpm screw speeds. Includes temperature panel with HMI controller. 460 volt AC input., 2008 COPERION ZSK-40-MEGA.
View Details
10 Photos
1.57" Keifel #CA4, lowboy Blown Film Line, 30 HP, 24:1 L/D, air cooled, 7 zones, w/ conversion parts to 30:1

1.57" Keifel #CA4, lowboy Blown Film Line, 30 HP, 24:1 L/D, air cooled, 7 zones, w/ conversion parts to 30:1 L/D, 1989

Aaron Equipment Co | Schaumburg, IL
708-41... (Show) 708-412-6077
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: CA4
Year: 1989
used- keifel 40 mm blown film line, model ca4, 24:1 l/d. lowboy extruder having an electrically heated, air-cooled barrel. a second complete barrel, screw, and heaters are included to convert the machine to a 30:1 l/d ratio. gearbox is belt driven by a 30 hp reliance d/c motor with scr control. includes hopper, water ...more
View Details
10 Photos
1.6" Kiefel Technologies Lowboy, Extruder, air cooled, Kirion C Control, die w/ cart, calibration cage

1.6" Kiefel Technologies Lowboy, Extruder, air cooled, Kirion C Control, die w/ cart, calibration cage #M1000-C, motorized adj, HMW-HDPE up to 1000 mm @ 0.25-6 mil, 1997

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Kiefl
Model: M1000-C
Year: 1997
40mm Kiefel Lowboy Extruder, 26:1 L/D, With Die, Rotating Cart Calibration Cage and Takeoff Air Cooled Extruder, 3 Barrel Zones, 42 HP AC Vector Drive Extruder Controlled With Kirion C Automation, 15" Touch Screen Display Extruder Comes With BD Plast Manual Screen Changer(New In 2014) 80MM Die With Spare Pins Techflow ...more
View Details
10 Photos
1.6" Werner & Pfleiderer #ZSK20, Co-Rotating twin screw extruder, 40:1 LD, 43" centerline, 588 RPM, w/

1.6" Werner & Pfleiderer #ZSK20, Co-Rotating twin screw extruder, 40:1 LD, 43" centerline, 588 RPM, w/ feeder, spare motor & gearbox

Aaron Equipment Co | Schaumburg, IL
708-41... (Show) 708-412-6077
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Werner & Pfleiderer
Model: ZSK20
used-20mm werner & pfleiderer model zsk20 co-rotating twin screw extruder. has 40/1 l/d barrel at 43" centerline height driven through a 3:1 gearbox with a 37-newton meter torque capacity per screw shaft. extruder is powered by 5 hp ac motor with allen bradley 1336 impact drive unit, 588 rpm screw speed. includes ...more
View Details
10 Photos
1.6" Werner & Pfleiderer #ZSK20, Co-Rotating twin screw extruder, 46:1 LD, 41" centerline, 517 RPM, w/

1.6" Werner & Pfleiderer #ZSK20, Co-Rotating twin screw extruder, 46:1 LD, 41" centerline, 517 RPM, w/ feeder, 1990

Aaron Equipment Co | Schaumburg, IL
708-41... (Show) 708-412-6077
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Werner & Pfleiderer
Model: ZSK20
Year: 1990
used-werner & pfleiderer model zsk40, 40mm co-rotating twin screw extruder. 1990 model year. 46:1 l/d vented barrel with 11-barrel sections and a 41" centerline height. driven by 50 hp 500 volt 1750/2100 rpm dc motor with scr control and with a screw speed of 517 rpm. includes acrison 1.5 hp weight loss ...more
View Details
10 Photos
1.77" Kiwex #SJ65/25, pedestal extruder, 25:1 L/D, 56" centerline, Omron E5EC temperature controllers, 2021

1.77" Kiwex #SJ65/25, pedestal extruder, 25:1 L/D, 56" centerline, Omron E5EC temperature controllers, 2021

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Kiwex Machinery
Model: SJ65/25
Year: 2021
Used 65mm Kiwex Extruder, 25:1, Air Cooled, 2021 Vintage, 25 HP AC Motor 4 Barrel Zones, 2 Die Zones, Omron E5EC Temperature Controllers Model SJ65/25 ABB AC Inverter Drive, Model ACS550-01-045A-4 New In 2021, S/N KWX2210836-1 460/3/60 Includes Screw And Hopper Machines Has A 53" Centerline Has A Motorized Base Raise ...more
View Details
10 Photos
1.78" Theysohn #TSK-N-045, Co-Rotating Twin Screw Extruder, 45mm, 500 RPM, 50 HP, variable speed Gearbox

1.78" Theysohn #TSK-N-045, Co-Rotating Twin Screw Extruder, 45mm, 500 RPM, 50 HP, variable speed Gearbox, 36:1, Side Feeder, PLC, Emerson Digitax ST Plus DC dr module.

Aaron Equipment Co | Schaumburg, IL
708-41... (Show) 708-412-6077
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: TSK-N-045
used- theysohn 45mm co-rotating twin screw extruder, type tsk-n 045. 45mm (1.77") diameter; 36:1 l/d; 8 housing sections and 1 die zone; electrically heated, water cooled. max screw speed 500 rpm via a 50 hp/37.5 kw piv variable speed gearbox, type 2n40110, by a 60 hp/44.7 kw 500v dc, 105a, continuous duty, 1750/2100 ...more
View Details
9 Photos
2" Berlyn, non-vented water & air cooled extruder, 30:1 L/D, 6-zone electrically heated

2" Berlyn, non-vented water & air cooled extruder, 30:1 L/D, 6-zone electrically heated

Perry Videx LLC | Hainesport, NJ
609-26... (Show) 609-267-1600
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Berlyn
Used 2 Berlyn Single-Screw Extruder, 30:1 L/D, Manufacturer: Berlyn, Serial: 025D379, Barrel: non-vented, 6-zones, electrically heated, water cooled, 42 centerline height, Belt driven by a 40 hp DC motor, 460 volt, with Allen Bradley Model 1395 SCR through a Koellmann gearbox, Gearbox: size PEZS 312, 19.95:1 reduction ...more
View Details
10 Photos
2" Davis Standard #DS20, extruder, 24:1 L/D, air cooled

2" Davis Standard #DS20, extruder, 24:1 L/D, air cooled

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: DS20
Used 2" Davis Standard Extruder, 24:1 L/D 20 HP DC With Spectrum DC Drive, 42" Centerline Air-Cooled Barrel 6.53:1 Gearbox Ratio 3 Barrel Zones, 3 Downstream Zones New Novus N2000 Temperature Controllers Amp Meter, Pressure Gauge, RPM Gauge, Cold Start By-Pass, And Speed Pot 116 Amp Nameplate Amperage 150 Amp Main ...more
View Details
10 Photos Video
JUST ADDED!
2" Davis Standard extrusion line, 24:1 L/D ratio, 3 barrel zones, air cooled, 20 HP AC motor with Yaskawa AC

2" Davis Standard extrusion line, 24:1 L/D ratio, 3 barrel zones, air cooled, 20 HP AC motor with Yaskawa AC drive

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Used 2” Davis Standard Extrusion Line, New in 2020 2” Davis Standard, 24:1 L/D Ratio,3 Barrel Zones, Air Cooled, 20 Hp AC Motor With Yaskawa AC Drive, Conair VF Volumetric Feeder, Conair Model HTMO-12-4 HighTech Multipass Combination Vacuum/Cooling Tank, 12’ Length x 24” Wide x 8” High. ...more
View Details
10 Photos
2" Rheotec, extruder, 24:1 L/D ratio, 20 HP DC motor, 4 barrel zones, air cooled, 2 die zones, Fr.259AT

2" Rheotec, extruder, 24:1 L/D ratio, 20 HP DC motor, 4 barrel zones, air cooled, 2 die zones, Fr.259AT, stand w/ casters

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Rheotec
Used 2” Rheotec Extruder, 24:1 L/D Ratio, 20 HP DC Motor 4 Barrel Zones, Air Cooled, 2 Die Zones 20 HP Powertron DC Motor, Model: 2590B452B04, Motor S/N: M4-18204-2-jh047 500 ARM Volts, 35A 150/300 Field Volts, 2.48A/1.24A 1750 RPM Frame 259AT Cutler-Hammer Respondor DC Drive, No. GA210TC55-A Supply: ...more
View Details
10 Photos
2" Royle, cold feed rubber extruder, 12:1 L/D, 15:1 G/B ratio, forced lube system, straight delivery head

2" Royle, cold feed rubber extruder, 12:1 L/D, 15:1 G/B ratio, forced lube system, straight delivery head

Soberay & Sons Ltd | Cleveland, OH
216-33... (Show) 216-334-2003
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Royle
Item 6008 - One (1) Royle 2.0" 50mm Cold Feed Rubber Extruder, 12:1 L/D, 15:1 G/B ratio, No motor, Reliance 15 HP 460 VAC drive with controls, straight delivery head, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
View Details
10 Photos
2" Sterling plastic extruder, 24:1 L/D, 25 HP, 1750 RPM, 240 VAC motor

2" Sterling plastic extruder, 24:1 L/D, 25 HP, 1750 RPM, 240 VAC motor

Soberay & Sons Ltd | Cleveland, OH
216-33... (Show) 216-334-2003
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Sterling
Item 6524 - One (1) Used Sterling 2" 50mm Plastic Extruder, 24:1 L/D, 25 HP 1750 RPM 240 VAC motor.
View Details
10 Photos
2" Welex #200-24-1, single screw extruder

2" Welex #200-24-1, single screw extruder

Platinum Asset Services | Scarborough, ON
416-36... (Show) 416-366-2326
Category: Extruders and Extrusion Lines
Seller: Platinum Asset Services
Location: Scarborough, ON
Mfr: Welex
Model: 200-24-1
WELEX, 200 24-1, 2", SINGLE SCREW EXTRUDER, WELEX 200 24:-1.
View Details
6 Photos
2.16" Leistritz #ZSE-50-GG, counter rotating twin screw extruder, 44:1 L/D, 62 HP Baumuller DC motor, 1997

2.16" Leistritz #ZSE-50-GG, counter rotating twin screw extruder, 44:1 L/D, 62 HP Baumuller DC motor, 1997

Arlington Machinery | Lake Zurich, IL
847-95... (Show) 847-957-9731
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Model: ZSE 50 GG
Year: 1997
55MM Leistritz ZSE 50 GG Counter-Rotating Twin Screw Extruder 300 RPM Screw Speed 44:1 L/D Ratio 10 Barrel Sections, Water-Cooled Barrel, Non-Vented 46KW(62HP) Baumuller DC Motor, 112 AMPS DOES NOT INCLUDE DC DRIVE MISSING HALF OF BARREL HEATER IN ZONE 7 10 Barrel Zones, 3 Die Zones Eurotherm 2208e Controllers -SOME ...more
View Details
10 Photos
View All Listings