1 - 50 of 72 listings
Featured
Entek 103 mm Twin Screw Extruder 600 HP
Rider Opportunity Group | Miami, FL
Category: Extruders
Seller: Rider Opportunity Group
Location: Tallahasse, FL
Mfr: Entek
Model: E 103MM
Year: 2012
ENTEK 103 mm Twin Screw Extruder ( 200 Operating Hours ), Model : E-103/56D Serial# 84908-10311, Mfg 4/2012, 600 HP motor 1735 RPM 480 Volt, 600 RPM screws, Barrel design layout - 15 Barrels ( barrel material 73B ) :, feed-solid-solid-vent-side feed-solid-solid-vent-side feed-solid-injection-vent-solid-vent-solid ...more
Featured
Entek 73mm Twin Screw Compounding Extruder 400 HP
Rider Opportunity Group | Miami, FL
Category: Extruders
Seller: Rider Opportunity Group
Location: Pensacola, FL
Mfr: Entek
Model: E 73/52D
Year: 2012
ENTEK E-73/ 52D Twin Screw Extruder, 73 mm Compounding Extruder, Serial # 84910-0731111, Mfg March 2012, 400 Hp motor, 600 Rpm screw speed, Barrel design layout - 13 Barrels ( barrel material 73B ):, Feed-inj-solid-solid-solid-vent-inj-inj-vent-inj-inj-vent-solid, Control panels and HMI panel on rolling cart, Allen ...more
0.47" Brabender GMBH Co. #838660.001, Extruder, 9 KW, 26 amps, 200 Volts, 2010
HGR24 | Euclid, OH
Category: Extruders
Seller: HGR24
Location: Euclid, OH
Mfr: G.m.b.h.
Model: 838660.001
Year: 2010
Inventory No. 1225-035-0008 Manufacturer Brabender Gmbh Co. Model No. 838660.001 Name Extruder Arrival Date 12-15-2025 Dimensions L x W x H (inches) 56 x 36 x 50 Electrical 3/50/60/200 Weight (lb.) 625 Category Plastics Condition Used Available Quantity 1 Serial No. 1924161 Make Year 2010 Item 9.0 Kw, 26 A, Made In ...more
0.63" Leistritz #NANO16, Twin Screw Extruder, 16mm
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Leistritz
Model: NANO16
Used 18 MM Leistritz Twin Screw Extruder, Model Micro 18GL, 18 mm screws, co-rotating screws, 30:1 l/d, 500 rpm screw speed, electrically heated, water cooled barrel, 18 mm screws, 3 hp, 230 volt, 1755 rpm dc motor with SCR controller, Allen Bradely PLC controller, (6) barrel sections with, (1) feed section, (1) ...more
0.71" Leistritz #Micro18PH/GG-40D, Twin Screw Extruder, 18mm, ccw, 40:1 L/D, 3200 RPM, 2003
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Leistritz
Model: MICRO18PH/GG-4
Year: 2003
Used 18 mm Leistritz twin screw extruder, model Micro18PH/GG-40D, 18 mm screws, counter rotating screws, 40:1 l/d, 500 rpm screw speed, electrically heated, water cooled barrel, 2.3 kw, 480 volt, 3200 rpm dc motor with SCR controller, (2) barrel sections with jacketed feed, (1) vent, on board control panel with (10) ...more
0.75" APV #MP19TC, Twin Screw Extruder, water cooled, 25:1 L/D, 2 KW, 19mm, 220 V., CR19, 1994/1995
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Apv
Model: MP19TC
Used 19 MM APV twin screw extruder, model MP19TC, electrically heated, water cooled barrel, 25:1 L/D, 19mm segmeted screws, vented and plugged, driven by 2 kw, 220 volt, with control panel, including volumetric feeder, APV Chill Roll Unit, size CR19, serial# NEF940071 731/1, built 1994, extruder serial# NEF950033 ...more
0.75" Killion #KL-075, Single Screw Extruder, 25:1 L/D, 12-120 RPM, wheels, w/ feeder, controls & infrastructure
Aaron Equipment Co | Schaumburg, IL
Category: Extruders
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Killion
Model: KL-075
used killion kl-075 single screw extruder. 19.1 mm diameter screws. 25:1 l/d. screw speed 12-120 rpm via a gearbox by a 1.1 kw-380 volt/50cycle/3ph dc motor. 3 housing sections. electrically heated, air cooled. feed hoppers, control/operating panel and additional infrastructure. on wheels. serial # 19707. in an ...more
Get email updates for newly added Extruders
Extruders (also known as extrusion machines) are devices that shape materials by forcing them through a shaped die, creating continuous products with a specific cross-section. Used in industries like plastics, food processing, and metalworking, extruders transform raw materials into products such as pipes, sheets, films, and snacks.
1" Killion #KLB-100, 24:1 L/D, 3 HP DC motor
Arlington Machinery | Lake Zurich, IL
Category: Extruders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Killion
Model: KLB-100
Used 1.0" Killion Extruder 24:1 L/D Ratio 15:1 Gearbox Ratio, Perfection Gear Gearbox, Rated To 3.10 HP 116 RPM Max. Screw Speed 3 Barrel Zones, 3 Die Zones, Eurotherm 808 Temperature Controllers Temp Panel With Amp Gauge, Tachometer, And Speed Pot NO COOLING Bolt On Barrel Flange With Nozzle 1.5" L x 1.0" W Oval Feed ...more
1" Killion #KLB-100, 24:1 L/D, 3 HP DC motor
Arlington Machinery | Lake Zurich, IL
Category: Extruders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Killion
Model: KLB-100
Used 1.0" Killion Extruder 24:1 L/D Ratio 15:1 Gearbox Ratio, Perfection Gear Gearbox, Rated To 3.10 HP 116 RPM Max Screw Speed 3 Barrel Zones, 2 Die Zones Eurotherm 808 Temperature Controllers Temp Panel With Amp Gauge, Tachometer, And Speed Pot NO COOLING Bolt On Barrel Flange With Nozzle 1.5" L x 1.0" W Oval Feed ...more
1" Killion #KLB-100, 24:1 L/D, 3 HP DC motor
Arlington Machinery | Lake Zurich, IL
Category: Extruders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Killion
Model: KLB-100
Used 1.0" Killion Extruder 24:1 L/D Ratio 15:1 Gearbox Ratio, Perfection Gear Gearbox, Rated To 3.10 HP 116 RPM Max. Screw Speed 3 Barrel Zones, 2 Die Zones, Eurotherm 808 Temperature Controllers Temp Panel With Amp Gauge, Tachometer, And Speed Pot NO COOLING Bolt On Barrel Flange With Nozzle 1.5" L x 1.0" W Oval Feed ...more
1.05" Leistritz #MIC-27/GL-36D, Twin Screw Extruder, 36:1 L/D, 15.75 HP, Co-/Counter-Rotating, 2006
Aaron Equipment Co | Schaumburg, IL
Category: Extruders
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: MIC-27/GL-36D
Year: 2006
used- leistritz twin screw extruder, type mic 27-gl-36d. (2) 1.05" (27 mm) diameter screws. 36:1 l/d ratio. co-rotating. 8-barrel housing section electrically heated, water cooled. (1) degassing port. maximum screw speed 500 rpm. gearbox is direct driven via a 15.75 hp/10.5 kw, 1450/1740 rpm a/c motor. free standing ...more
1.25" American Kuhne, Ultra CR 24:1 Air-Cooled Extruder, 7.5 HP, 1800 RPM, (3) heating/cooling zones, 460 V., 3PH, 2016
Revelation Machinery | Chicago, IL
Category: Extruders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: American
Model: AK 125 24.1 A/C EXT
Year: 2016
Make: American Kuhne, Model: AK 125 24.1 A/C EXT, Year: 2016, Machine Location: Michigan, Screw Diameter: 1.25″, Length‑to‑Diameter (L/D) Ratio: 24:1, Motor HP: 7.5HP, Motor Type: AC Vector Duty, 1800RPM, TE‑NV, Gearbox: 11HP rated at 100RPM, 1.5 service factor, rear-mounted thrust bearing ...more
1.25" Killion, Single Screw Extruder, 24:1 L/D, 3 Barrel zones, 5 HP, 180 V, w/ Bath
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Killion
Used 1.25" Killion single screw extruder, 24:1 L/D, electrically heated, air cooled barrel, jacketed feed section, driven by 5 hp DC motor drive, on stand with control panel, includes stainless steel water bath with air wipe, less extruder screw, no blower or pumps, Killion serial# 14280.
1.4" Xinda PSHJ-35 Twin Screw Extruder, 42:1 L/D, 600 RPM, Clam Shell Barrel, 15kW, w/ Conveyor & Cutter, 2021
Aaron Equipment Co | Schaumburg, IL
Category: Extruders
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Year: 2021
used- xinda twin screw extruder, model pshj-35. 35.6mm screw diameter; 42:1 l/d ratio; 600 rpm screw speed; 30-100 kg/hour output; clam shell barrel. 15 kw motor, 3/60/480v. built 2021. with cooling conveyor and guillotine cutter.
2" Bonnot #2, single screw extruder, Stainless Steel barrel & screw, approx. 2" diameter x 10" long jacketed barrel, 1970, #70724, 1970
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Bonnot
Model: 2
Year: 1970
Used Bonnot single screw extruder, model 2", stainless steel barrel and screw, with approximately 2" diameter X 10" long jacketed barrel with Pin and Grooving barrel, 6" x 4.5" feed throat with stainless steel chopper bar, driven by 3 hp, 230/460 volt motor through gearbox, serial# 2091, built 1970.
JUST ADDED!
2.5" Emerson #SM100HF, Cold Feed Rubber Extruder, 12:1 L/D ratio, power feed roll, 15 HP Toyo motor, 1250 RPM, 460 Volts
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Emerson
Model: SM100HF
Item 6010 - One (1) Emerson 2.5" 60mm Cold Feed Rubber Extruder, Model SM100HF, 12:1 L/D, 25:1 G/B ratio, Toyo 15 HP 1250 RPM 460 VDC motor, forced lube system, PFR power feed roll external bearings and adjustable scraper blade.
3" Plastic Bag Extruder Large, w/Control materal blender, calandering roller machine, neddel punch machine, 5ton gantry crane
C3 Surplus LLC | Miami, FL
Category: Extruders
Seller: C3 Surplus LLC
Location: Miami, FL
Mfr: Plastic Bag Extruder Large
Overview, This complete plastic bag and film extrusion line offers a turnkey solution for plastic film manufacturing operations. Centered around an NRM 3" horizontal extruder, this comprehensive system includes all essential components from material blending through final take-up. The package includes calendering ...more
JUST ADDED!
3.5" Egan, Extruder, 150 HP, 32:1 L/d, water cooled, 52" centerline
Revelation Machinery | Chicago, IL
Category: Extruders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Egan
Year: 1900
Make: Egan, Model: 3.5", Year: 1900, Machine Location: Illinois, 3.5″ 32:1 L/D, Egan Extruder, Electrically Heated, Water Cooled (Closed Loop), Top Vented, Plugged Barrel at an Approximate 52″ Center Line Height., -Gearbox: Reduction Ratio Of 7:1 Is, -Belt Driven, -150 Hp D/C Motor, -3½” ...more
3.5" HPM, Extruder, 11" Belt, 100 HP, 30:1 L/D, air-cooled
Arlington Machinery | Lake Zurich, IL
Category: Extruders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Hpm
Used 3.5" HPM Extruder, Model 3.5"" Prodex 30.1 30:1 L/D Ratio, Air Cooled Barrel 13.88:1 L/D Ratio, Flender SZNE 250 Gearbox Rated To 325 HP Belt Driven, 1.22:1 Belt Ratio, 9" Drive Belt, 11" Driven Belt 100 HP AC Reliance Motor And Reliance GV3000/SE Inverter Drive Unitized Control Panel, 5 Barrel Zones, 10 Barrel ...more
3.5" Nakata #CFPBE, Pin Barrel Extruder, 14:1 L/D, (3 available)
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nakata
Model: CFPBE
Item 6230 - One (1) Used Nakata 90mm CFPBE Pin Barrel Rubber Extruder, 14:1 L/D, gearbox ratio 17.4:1, GE 60 HP 1150 RPM 500 VDC motor, straight delivery head, forced lube system, PFR power feed roll external bearings and adjustable scraper blade.
3.5" NFM, Cold Feed Rubber Extruder, 16:1 L/D, power feed roll
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nakata Zoki
Item 6048 - One (1) Used Nakata 90mm CFE Cold Feed Rubber Extruder, 16:1 L/D, no motor, straight delivery head with clamp assembly, forced lube system, PFR power feed roll external bearings and adjustable scraper blade.
3.5" PTI #3500, Extruder, 42" Centerline, 166 HP Belt, 30:1 L/D, 5 Die Zones, 460 V., 3PH
Arlington Machinery | Lake Zurich, IL
Category: Extruders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Pti
Model: 3500
3.5" PTI Extruder, Model 3500 30:1 L/D Ratio Air Cooled Barrel 13.86:1 L/D Ratio, Flender SDNE 200 Gearbox Rated To 166 HP, Belt Driven, 1:1 Belt Ratio 100 HP AC Motor And Baldor Inverter Drive Control Panel With 5 Barrel Zones, 5 Die Zones, Eurotherm Temperature Controllers 42" Centerline 300 Amp Disconnect 460/3/60 ...more
JUST ADDED!
3.7" Coperion #STS-95, Twin Screw Extruder, 300 RPM, 95mm, 10 section, 40:1 L/D, Co-Rotating Compounding Line, 10 section, 2010
Aaron Equipment Co | Schaumburg, IL
Category: Extruders
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: STS-95
Year: 2010
used coperion sts 95 twin screw extruder 95mm, 40:1 l/d co-rotating compounding line (20102011), (2) 95 mm diameter screws, 40:1 l/d ratio, co-rotating inter-meshing side by side screw design, 10 total barrel sections, (9) heated barrels, electrically heated water cooled. driven by a 280 kw (375.5hp) dc drive motor ...more
4" Bonnot, extruder, single screw, jacketed, mild steel, 15 HP
Machinery & Equipment Co | Brisbane, CA
Category: Extruders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Bonnot
Bonnot single screw extruder, model 4", featuring a mild steel barrel and screw with an approximately 4" diameter x 46" long jacketed barrel. The extruder has an 8" x 16" hopper feed size and is driven by a 15 HP, 230/460 Volt, 3-phase, 60 Hz, 1800 RPM motor through a Dodge gearbox with a 13.66 gear ratio. The system ...more
4.5" Davis Standard #45IN45HT, Extruder, air cooled, 17.49:1 L/D, 150 HP, 1997
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Davis Standard
Model: 45IN45HT
Year: 1997
Used 4.5" Davis Standard Thermatic extruder, model 45IN45HT, 30:1 L/D, air cooled barrel, jacketed feed section, vented barrel, gearbox rated 365 hp, 17.4:1 gearbox ratio, 1.5 service factor, extruder driven by 150 hp dc motor, over barrel control panel with temperature controllers, machine serial# V-2235, SO# 59611 ...more
4.5" Nakata #CFPBE, Pin Barrel Rubber Extruder, 16:1 L/D, 150 HP Reliance motor, 460 VAC, (2 available)
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nakata
Model: CFPBE
Item 6250 - One (1) Used Nakata 4.5" 120mm CFPBE Pin Barrel Rubber Extruder, 16:1 L/D, no motor, no head, forced lube system, PFR power feed roll external bearings and adjustable scraper blade.
JUST ADDED!
4.5" Nakata, Cold Feed Rubber Extruder, 12:1 L/D ratio, power feed roll, 75 HP, 1150 RPM
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nakata
Item 6076 - One (1) Used Nakata 4.5" 120mm Cold Feed Rubber Extruder, 12:1 L/D, 29.92:1 G/B ratio, GE 75 HP, 1150 RPM, 500 VDC motor, PFR power feed roll external bearings and adjustable scraper blade.
JUST ADDED!
4.5" NRM, Cold Feed Rubber Extruder, 12:1 L/D ratio, power feed roll, 75 HP, 1150 RPM, 460 Volts, 3PH
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Item 6077 - One (1) Used NRM 4.5" 120mm Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, GE 75 HP, 1150 RPM, 500 VDC motor, PFR power feed roll external bearings and adjustable scraper blade.
4.5" NRM, air cooled, 150 HP DC motor with SCR, 4 barrel, 1 die zone
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Nrm
Used 4.5" NRM Pacemaker extruder, 20:1 L/D, electrically heated, air cooled, 150 HP DC motor with SCR, control panel with 4 barrel, 1 die zone with temperature controllers.
JUST ADDED!
4.7" American Kuhne #AK-120MM, Single Screw Extruder, 30:1 Rebuild, 200 HP, 42" centerline, air cooled, 480 V., 2013
Revelation Machinery | Chicago, IL
Category: Extruders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: American
Model: AK-120MM
Year: 2013
Make: American Kuhne, Model: AK 120MM 30:1 Rebuild, Year: 2013, Machine Location: Illinois, -Screw Size: 120 mm, -L/D Ratio: 30:1, -Motor: 200 HP, -Digital Controls, -42″ Centerline Height, -Electrically Heated, -Air Cooled Barrel, -Electrical Requirements: 480 V.
JUST ADDED!
4.7" Davis Standard #120MM45CT, Single Screw Extruder, 30:1 L/D Ratio, water cooled, 200 HP
Revelation Machinery | Chicago, IL
Category: Extruders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Davis Standard
Model: 120MM45CT
Year: 1900
Make: Davis Standard, Model: 120MM45CT, Year: 1900, Machine Location: Illinois, -Screw Diameter: 120 mm, -L/D Ratio: 30:1, -Electrically Heated, -Water Cooled, -Motor: 200 HP, -Temperature Control Panel.
6" Davis Standard #6026-DRH, Egan Extruder, 44:1 L/D, 400 HP, water cooled, 11.478:1 gearbox, 816 HP
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Davis Standard
Model: 6026-DRH
Used 6" Davis Standard Egan extruder, model 6026-D.R.H, 44:1 l/d, electrically heated, water cooled barrel, jacketed feed section, vented barrel with vacuum pump, 11.478:1 gearbox ratio, rated 816 hp, with installed with 400 hp dc motor, cored screw, control panel, gearbox serial# X4506, Nordson hydraulic slide plate ...more
6" Krupp, Pin Barrel Rubber Extruder, 14:1 L/D, 250 HP Reliance motor, 1795 RPM, 41.46:1 Gearbox ratio, 460 VAC, 2006
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Krupp
Year: 2006
Item 6267 - One (1) Used Krupp 6.0" 150mm CFPBE Pin Barrel Rubber Extruder, 14:1 L/D, Reliance 250 HP 1785 RPM 460 VAC motor, 41.46:1 gearbox ratio, variable straight delivery head, pneumatic head clamp assembly, forced lube system, PFR power feed roll external bearings and adjustable scraper blade, date 2006.
6" NFM, Pin Barrel Rubber Extruder, 14:1 L/D, 250 HP GE motor, 1150 RPM, 41.46:1 Gearbox ratio, 500 VDC, 2016
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nfm
Year: 2016
Item 6266 - One (1) Used NFM 6.0" 150mm CFPBE Pin Barrel Rubber Extruder, 14:1 L/D, 250 HP 1150 RPM 500 VDC motor, 41.46:1 gearbox ratio, variable straight delivery head, pneumatic head clamp assembly, forced lube system, PFR power feed roll external bearings and adjustable scraper blade, date 2016, S/N ...more
6" NFM, Cold Feed Rubber Extruder, 12:1 L/D, 2000
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nfm
Year: 2000
Item 6105 - One (1) Used NFM 6" 150mm Cold Feed Extruder, 12:1 L/D, 41.46:1 G/B ratio, no motor, straight delivery head with clamp assembly, forced lube system, PFR power feed roll external bearings and adjustable scraper blade.
6" NFM, Cold Feed Rubber Extruder, 12:1 L/D, 500 Volts
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Item 6106 - One (1) Used NRM 6" 150mm Cold Feed Extruder, 12:1 L/D, 26.04:1 G/B ratio, 200 HP 650/1150 RPM 500VDC motor, straight delivery head with Kwik clamp assembly, forced lube system, PFR power feed roll external bearings and adjustable scraper blade.
6" PTI #6000, Single Screw Extruder, 62" Centerline, 30:1 L/D Vented Barrel, 7 Barrel Zones, 16 Downstream Zones, 400 HP, 2003
Arlington Machinery | Lake Zurich, IL
Category: Extruders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Pti
Model: 6000
Year: 2003
Used 6" PTI Single Screw Extruder, Model 6000, 30:1 L/D, Air-Cooled Cooled, 400 HP, New in 2003 7 Barrel Zones, 16 Downstream Zones 21.7:1 Flender Gearbox, Model SZNF 390, Rated up to 701 HP 62" Centerline 9" Lx 7" W Feed Throat 400 HP WEG AC Motor With WEG CFW-11 Inverter Drive 460/3/60, 780 FLA 900 Amp Disconnect ...more
8" Davis Standard #80IN80HT, extruder
Blades Machinery Co Inc | Elk Grove Village, IL
Category: Extruders
Seller: Blades Machinery Co Inc
Location: Elk Grove Village, IL
Mfr: Davis Standard
Model: 80IN80HT
Year: 2001
10" ASC, horizontal ram extruder, approximately 8" x 12" feed opening, #2930-41 (2 available)
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Asc
Model: 2930-41
Used 10" Ventura Hydraulic Fabricators horizontal ram extruder, approximately 8" x 12" feed opening with screen changer, hydraulically operated less pump.
10" Intercole Stuart Bolling, single screw extruder, 10:1 l/d, 300 HP, 2000
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Bolling
Year: 2000
Used 10" Intercole Stewart Bolling single screw extruder, 10:1 l/d, electrically heated, air cooled barrel, jacketed feed section with hydraulically operated ram feeder with hydraulic pump, cored screw, 24.7:1 gearbox ratio (rebuilt 2020), 300 hp dc motor with SCR controller, Beringer hydraulic slide plate screen ...more
12" TELE Machine, Vacuum Extruder/Turbo Separator, 6' L paddle/auger section, 0.8-1.5 tons/hr., 3 Mpa, 3" diameter Shaft & trough, 15 kW, 2014
Machinery & Equipment Co | Brisbane, CA
Category: Extruders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Tele Machine
Year: 2014
Vacuum Extruder / Turbo Separator, includes 12" diameter X 6' long paddle/auger section, 4-1/2' long paddle section, 16" long auger section, stainless steel paddles, 3" diameter carbon steel shaft and trough, Driven by 15 kW motor through gear reducer with 44.39:1 ratio. Rated for 0.8 to 1.5 tons/hr, 3.0 mpa ...more
19" mm APV #MP19TC, Twin Screw Extruder, electic heat, water cooled, 25:1 L/d, Control, volumetric feeder, 1994/1995
HGR24 | Euclid, OH
Category: Extruders
Seller: HGR24
Location: Euclid, OH
Mfr: Apv
Model: MP19TC
Year: 1995
Inventory No. 0825-057-0027 Name 19 Mm Apv Twin Screw Extruder, Model Mp19tc Arrival Date 12-16-2025 Dimensions L x W x H (inches) Unavailable Weight (lb.) 1 Category Plastics Condition Used Available Quantity 1 Make Year 1995 Item Used 19 Mm Apv Twin Screw Extruder, Model Mp19tc, Electrically Heated, Water Cooled ...more
30" ASM (Akron Standard Machine) Batch Off Sys, dip tank, 32' L cooling section, wig wag front to back stacking conveyor, #3155-3
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Asm
Model: 3155-3
Used ASM (Akron Standard Machine) Batch Off System, 30" wide, dip tank, 32' long cooling section with wig wag front to back stacking conveyor.
38" ASM (Akron Standard Machine) Batch Off System, integrated slitter, dip tank, #3255-4
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Asm
Model: 3255-4
Used ASM (Akron Standard Machine) batch off system, model 38" Batch Off, 38" wide with integrated slitter, dip tank, approximately 40' long cooling section with wig wag front to back stacking conveyor, serial# MBO424.
65" Dolci cast film extrusion line, 5-layer, 78.74" web width, 4-extruders, 1968 FPM, 2011
Global Equipment International | Chalfont, PA
Category: Extruders
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Dolci
Year: 2011
DOLCI 5 LAYER CAST FILM EXTRUSION LINE, MFG 2011, WEB WIDTH 78.74"/2000mm, 4 EXTRUDERS, SPEED 1968 FPM/600MPM, OUTPUT MAXIMUM 47.2"/1200mm, EXTRUDER 1 LAYER 160/30, SCREW DIAMETER 65, EXTRUDER 2 LAYER 75/30, EXTRUDER 3 LAYER 75/30, EXTRUDER 4 LAYER 65/30, CLOEREN HEAD WITH AUTOMATIC GAUGE CORRECTION.LAYER 5 CLOEREN ...more
Aeromatic #E-140 GEA NICA radial basket extruder, Stainless Steel product contact surfaces, nominally rated .5 - 2 kg/min capacity, #3260-6
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Aeromatic
Model: E-140
Used Aeromatic GEA Nica radial basket extruder, model E140, stainless steel product contact surfaces, nominally rated.5 - 2 kg/minute capacity,.37 kw feeder motor, 20-160 rpm,.75 kw impeller motor, 20-140 rpm, on stand, 460 volt, serial# 8530, built 1997.
Aeromatic Fielder Aeromatic-Fielder # E-140, Aeromatic Nica extruder, Stainless Steel, 0.5-4 liters/minute, 5 HP & 1 hp motors, 230 V, 1991
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Aeromatic Fielder
Model: E-140
Year: 1991
Used Aeromatic Nica extruder, model E-140, stainless steel construction, nominally rated 0.5-4 liters/minute, with 0.5 hp and 1 hp motors, 230 volt, serial# 605D-058, built 1991.
Baker #MP-19-TC, Twin Screw Extruder, 40:1 L/D, 19 mm diameter Screw, 2 kW, 500 RPM, 220 V, 1999
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Baker
Model: MP-19-TC
Year: 1999
Used 19 MM APV Baker Perkins twin screw co rotating extruder, model MP-19-TC, 19 mm diameter screws, 40:1 l/d, electrically heated, water cooled barrel, split barrel design, 2 kW dc motor, 500 rpm screw speed, with K-Tron main feeder, (2) Brabender auxiliary feeders, (3) Zenith melt pumps, FTS chiller, external ...more
Baker Perkin #MPC, Twin Screw Extruder Compounder, w/ side feeder
Federal Equipment Company | Cleveland, OH
Category: Extruders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Baker
Model: MPC
Used Baker Perkiin twin screw extruder compounder system, model MPC/V 30, 30mm MP mixer driven by hp motor feeding 38mm extruder driven by hp motor, with integrated control console, machine# 605-184, built 1985.
DB Technologies #Struder-Press Machine, Extruder, 11.5" diameter Die plate, 10-15 lbs drier & 15-20 lbs wetter Loads, 6" diameter x 48" stroke Ram, 17" x 9" x 23" chamber, 1000 liter tank, 40 HP, 460 V, 2015
Machinery & Equipment Co | Brisbane, CA
Category: Extruders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Db Technologies
Model: STRUDER-PRESS MACHINE
Year: 2015
DB Technologies Extruder "Struder-Press Machine," 11.25" diameter die plate with 3/16" diameter perforations. Product is fed through hopper and pushed by hydraulically driven ram to discharge. Includes hopper infeed measuring 32.50" x 21.75" with press chamber measuring 17" x 9" x 23". Type Test Machine, Machine ...more
Entek 103 mm Twin Screw Extruder 600 HP
Rider Opportunity Group | Miami, FL
Category: Extruders
Seller: Rider Opportunity Group
Location: Tallahasse, FL
Mfr: Entek
Model: E 103MM
Year: 2012
ENTEK 103 mm Twin Screw Extruder ( 200 Operating Hours ), Model : E-103/56D Serial# 84908-10311, Mfg 4/2012, 600 HP motor 1735 RPM 480 Volt, 600 RPM screws, Barrel design layout - 15 Barrels ( barrel material 73B ) :, feed-solid-solid-vent-side feed-solid-solid-vent-side feed-solid-injection-vent-solid-vent-solid ...more
Entek 73mm Twin Screw Compounding Extruder 400 HP
Rider Opportunity Group | Miami, FL
Category: Extruders
Seller: Rider Opportunity Group
Location: Pensacola, FL
Mfr: Entek
Model: E 73/52D
Year: 2012
ENTEK E-73/ 52D Twin Screw Extruder, 73 mm Compounding Extruder, Serial # 84910-0731111, Mfg March 2012, 400 Hp motor, 600 Rpm screw speed, Barrel design layout - 13 Barrels ( barrel material 73B ):, Feed-inj-solid-solid-solid-vent-inj-inj-vent-inj-inj-vent-solid, Control panels and HMI panel on rolling cart, Allen ...more
