401 - 500 of 983 listings
19" x 59" Boeringer Mag #VDF48L, engine lathe, 2.08" spindle bore, 4-jaw 12" chuck, inch/metric, Sony 2-Axis digital read out
Aleco Machinery Sales | Milwaukee, WI
Category: Engine Lathes
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Boeringer
Model: VDF48L
(1) Pre Owned Boeringer (MAG) VDF 48L Engine Lathe, Type 48S Serial Number: 70.1025.0025654, Swing Over Bed 19”, Distance Between Centers 59”, Spindle Bore 2.08”, Spindle Nose (Camlock Type) D1-8, Spindle Speeds 11.2 to 2240 RPM, Main Drive Motor 15 HP AC, Taper Attachment, 12" 4 Jaw Chuck, Inch / ...more
19" x 60" LeBlond #Regal, engine lathe, 12" swing over cross slide, 3-jaw 15" chuck, inch/metric, coolant chip pan, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 9E-530, MODEL. REGAL, MAXIMUM SWING OVER BED. 19-1/4", SWING OVER CROSS SLIDE. 12", DISTANCE BETWEEN CENTERS. 60", SPINDLE SPEEDS. (12) 40-1600 RPM, HOLE THRU SPINDLE. 3-1/16", LONGITUDINAL FEEDS - ENGLISH. (48).0018-.104 IPR, LONGITUDINAL FEEDS - METRIC. (48).05-2.6 MMPR, THREADS ENGLISH. (48) 2-112 TPI ...more
19" x 72" Cincinnati Milacron #LR, engine lathe, 230 V., 3-phase
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Engine Lathes
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Cincinnati Milacron
Model: LR
Product: 19 x 72 Lathe, Model Number: LR, Serial Number: 55024-73-16, Control AC Voltage: 115V, AC Voltage: 230 3 Phase, Control Diagram: 609482.
19" x 72" LeBlond #Regal, engine lathe, 13" SOCS, 3-jaw 12" chuck, taper attach., #69093
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 8F2316, MODEL. REGAL, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 13", DISTANCE BETWEEN CENTERS. 72", SPINDLE SPEEDS. (12) 40 TO 1600 RPM, FEEDS. (48).0018 TO.104 IPR, THREADS. (48) 2 TO 112 TPI, DIAMETER OF SPINDLE HOLE. 1-49/64", TAPER ATTACHMENT. YES, 3-JAW CHUCK. 12", HARDEN REPLACEABLE WAYS. YES ...more
19" x 72" LeBlond #Regal, 4-Jaw 12" chuck, 1-3/4"hole, L-2, chip guard, tailstock, thread dial, s/n #6E98, #A4428
Sterling Machinery Exchange | South El Monte, CA
Category: Engine Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Leblond
Model: REGAL
Swing Over Bed 19" Swing Over Cross Slide 12" Distance Between Centers 72" Spindle Speeds (12) 25 - 1,500 RPM Spindle Nose L-2 Hole Thru Spindle 1-3/4" Threads: Inch (48) 2- 112 TPI Feeds (48) 0.0018"- 0.104" Cross Slide Travel 10" Dimensions ( L x D x H) 133"x 39" x 54" WEIGHT 5,600 Lbs. s Spindle Nose 1-3/4" ...more
Get email updates for newly added Engine Lathes
Engine Lathes (also known as manual lathes or conventional lathes) are versatile machines used for turning, cutting, and shaping metal or other materials. Commonly found in metalworking, automotive, and manufacturing industries, they are ideal for producing cylindrical parts like shafts and bushings. Engine lathes are essential for precise machining and prototyping in workshops and factories.
JUST ADDED!
19" x 78" LeBlond #19-Regal, engine lathe, 12.25" swing over cross slide, Bison 3-jaw chuck, 1.5" bore, 5 HP, 38-1500 RPM RPM, taper, tailstock, Steady Rest
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL
Spec Sheet:, 19" X 78" LEBLOND REGAL ENGINE LATHE, SERIAL : 4E-816, MODEL : REGAL, SWING OVER WAYS : 19-1/2", SWING OVER CROSS SLIDE : 12-1/4", DISTANCE BETWEEN CENTERS: 78", SPINDLE SPEEDS: (12) 38 TO 1500 RPM, FEEDS : (48).002 TO.116 IPR, THREADS: (48) 2 TO 112 TPI, DIAMETER OF SPINDLE HOLE : 1-49/64", TAPER ...more
JUST ADDED!
19" x 78" LeBlond #Makino, engine lathe, 12" swing over cross slide, 3 & 4-jaw 12" chuck, 2-Axis Newall digital read out, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: MAKINO
SERIAL. 14E-330, MODEL. MAKINO, MAXIMUM SWING OVER BED. 19-1/4", SWING OVER CROSS SLIDE. 12", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (12) 40-1600 RPM, HOLE THROUGH SPINDLE. 3-1/16", LONGITUDINAL FEEDS - ENGLISH. (48).0018-.104 IPR, LONGITUDINAL FEEDS - METRIC. (48).05-2.6 MMPR, THREADS. (48) 2-112 TPI, CHUCKS ...more
JUST ADDED!
19" x 78" LeBlond #Makino, engine lathe, 12" swing over cross slide, 4-jaw 12" chuck, 2-Axis Newall DP7000 digital read out, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: MAKINO
SERIAL. 15E-579, MODEL. MAKINO, MAXIMUM SWING OVER BED. 19-1/4", SWING OVER CROSS SLIDE. 12", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (12) 40-1600 RPM, HOLE THROUGH SPINDLE. 3-1/16", LONGITUDINAL FEEDS - ENGLISH. (48).0018-.104 IPR, LONGITUDINAL FEEDS - METRIC. (48).05-2.6 MMPR, THREADS. (48) 2-112 TPI, CHUCK 4 ...more
19" x 78" LeBlond #Regal, engine lathe, 12-1/4" swing over cross slide, 3-jaw 12" chuck, 10 HP, #74512
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
Year: 1983
SERIAL. 6E936, MODEL. REGAL, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (25 TO 1000 RPM, FEEDS. (48).002 TO.116 IPR, THREADS. (48) 2 TO 112 TPI, DIAMETER OF SPINDLE HOLE. 1-49/64", TAPER ATTACHMENT. YES, 3-JAW CHUCK. 12", 4 JAW CHUCK. 16", FACE PLATE. 16" ...more
19" x 78" Leblond Makino #Regal, Engine Lathe, 12-1/4" swing over cross slide, 3-1/16" spindle bore, 12" 3-jaw chuck, 17" face plate, 10 HP, 1600 RPM, 2-axis Acu-Rite digital read out, 440 Volt, 1992
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Leblond
Model: REGAL
Year: 1992
HERE WE HAVE:, NICE WELL TOOLED 19″ x 78″ LEBLOND MAKINO SERVO-SHIFT ENGINE LATHE, W/ 3-1/16” SPINDLE BORE, 2 AXIS ACU-RITE DIGITAL READOUT, MAKE: LEBLOND MAKINO, MODEL: 19″ REGAL, 19X78, SERIAL NUMBER: 15E-484, NEW IN: 1992, HOLE THRU SPINDLE: 3-1/16″, SWING OVER BED: 19-1/4″ ...more
JUST ADDED!
19" x 78" Leblond #Regal, Engine Lathe, 10HP, 38-1500 RPM, 1-49/64" bore,
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: REGAL
THIS LEBLOND REGAL IS A 19" X 78" ENGINE LATHE. ITS TECHNICAL CAPABILITIES INCLUDE A 19-1/2" SWING OVER WAYS AND A 12-1/4" SWING OVER THE CROSS SLIDE, WITH A GENEROUS 78" DISTANCE BETWEEN CENTERS. THE MACHINE IS A 10 HORSEPOWER MOTOR. THE SPINDLE OFFERS TWELVE SPEEDS RANGING FROM 38 TO 1500 ...more
19" x 78" LeBlond #Regal, Engine Lathe, 19-1/2" Swing, 1600 RPM, 12" 6-Jaw Chuck, 10 HP, 1980
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
Year: 1980
SERIAL. 12E-128, MODEL. REGAL, YEAR NEW. 1980, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (12) 40 TO 1600 RPM, FEEDS. (48).0018 TO.104 IPR, THREADS (INCH). 2 TO 112 TPI, THREADS (METRIC).25 TO 14 MM PITCH, DIAMETER OF SPINDLE HOLE. 3-1/16, CHUCK. 12" 6 ...more
19" x 78" LeBlond #Regal, engine lathe, 12-1/2" swing over cross slide, 3-jaw 10" chuck, roller type steady rest, 7.5 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL.6E 443MODEL. REGALSWING OVER BED. 19"SWING OVER CROSS SLIDE. 12-1/2"DISTANCE BETWEEN CENTERS. 78"SPINDLE SPEEDS. 25 TO 1000 RPMHOLE THROUGH SPINDLE. 1-13/16"THREADS. 2 TO 112 TPIFEEDS.0023 TO.104 IPRTHREAD DIAL. YESCHUCK. 10" 3 JAWSTEADY REST. ROLLER TYPEMOTOR. 7-1/2 HORSEPOWER.
19" x 78" LeBlond #Regal, engine lathe, 13" swing over cross slide, 4-jaw 15" chuck, 6" roller type steady rest
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 5E290, MODEL. REGAL, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 13", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (12) 40 TO 1000 RPM, FEEDS. ().0023 TO.132 IPR, THREADS. () 2 TO 112 TPI, DIAMETER OF SPINDLE HOLE. 1-3/4", 4-JAW CHUCK. 15", TAPER ATTACHMENT. YES, STEADY REST. 6" ROLLER TYPE, HARDEN ...more
19" x 78" LeBlond #Regal, Engine Lathe, Tool Post, Chuck, 25-1000 RPM
Revelation Machinery | Chicago, IL
Category: Engine Lathes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Leblond
Model: REGAL
Year: 1900
Make: LeBlond, Model: Regal 19" x 54", Year: 1900, Machine Location: Wisconsin, Swing over Bed & Carriage Ways: 19 1/4”, Swing over Cross Slide: 12 1/4”, Distance Between Centers: 54, Spindle Speeds: 25-1000 RPM, Bed Length: 8’3”, Bed Width: 14 3/8”, Bed Depth: 11 1/2”, Carriage ...more
19" x 78" LeBlond #Regal, lathe, 1-49/64" spindle bore, 12-1/4" swing over cross slide, 7-1/2 HP, #15736
Vander Ziel Machinery Sales | Alto, MI
Category: Engine Lathes
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Leblond
Model: REGAL
LeBlond 19” x 78” Regal Lathe, 1 49/64” Spindle Bore, Serial # 5E-271, Asset # 15736, Swing over Bed & Carriage Ways 19 1/4”, Swing over Cross Slide 12 1/4”, Distance Between Centers 78”, Spindle Speeds (12) 25-1000 RPM, Spindle Bore 1 49/64”, Spindle Mores Taper No. 4 ...more
19" x 78" LeBlond #Regal, engine lathe, 38-1500 RPM, 5C collet closer, Bison 3-jaw chuck, 1-49/64" hole
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: REGAL
, 19" X 78" LEBLOND REGAL engine lathe with 3-jaw chuck & 5C closer. s: 19.5" swing, 78" centers, 38-1500 RPM spindle speeds, 10 HP motor, thread dial, chip pan, and tailstock. Ideal for precision machining tasks. Serial: 2D1199. Used condition., Spec Sheet:, 19" X 78" LEBLOND REGAL ENGINE LATHE, SERIAL : 2D1199 ...more
19" x 78" Leblond Regal #Servo-Shift, 3-1/16" hole, 40-1600 RPM, steady rest, 3 & 4-jaw chuck, 10 HP, 1979
Piedmont Machy of Charlotte | Charlotte, NC
Category: Engine Lathes
Seller: Piedmont Machy of Charlotte
Location: Charlotte, NC
Mfr: Leblond
Model: SERVO-SHIFT
Year: 1979
19" x 80" Leblond #6E-REGAL, engine lathe, 12.25" swing over cross slide, 80" centers, 1.8" bore, 2x Steady Rest, 220 V., chip pans, tailstock
Dominion Air & Machinery Co | Roanoke, VA
Category: Engine Lathes
Seller: Dominion Air & Machinery Co
Location: Roanoke, VA
Mfr: Leblond
Model: 6E-REGAL
19" x 80" LeBlond #8F, engine lathe, 11" swing over cross slide, 4-jaw 16" chuck, 7.5 HP, digital read out, #56205
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: 8F
Year: 1973
SERIAL. 8F281, MODEL. 8F, SWING OVER WAYS. 19", SWING OVER CROSS SLIDE. 11", CENTER DISTANCE. 80", SPINDLE SPEEDS. (12) 25 TO 1000 RPM, FEEDS. (48).0032 TO.104, THREADS. (48) 2 TO 64 TPI, SPINDLE HOLE. 1-3/4", CHUCK. 16" 4 JAW, STEADY REST. 5-1/2", TAPER ATTACHMENT. YES, THREAD DIAL. YES, HARD WAYS. YES, 2 AXIS ...more
19" x 80" LeBlond #Makino, engine lathe, 12-1/4" swing over cross slide, 3-jaw 15" chuck, 10 HP, taper attachment, 2001
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: MAKINO
Year: 2001
SERIAL. 15E188, MODEL. MAKINO, NEW. 2001, SWING OVER WAY. 19-1/2", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 80", SPINDLE SPEEDS. 30 TO 1600 RPM, FEEDS.0018 TO.104 IPR, THREADS. 2 TO 112 TPI, DIAMETER OF SPINDLE HOLE. 3", 3 JAW CHUCK. 15", HARD WAYS. YES, TAPER ATTACHMENT. YES, 2 SPEED TAILSTOCK. YES ...more
19" x 80" LeBlond #Makino, engine lathe, 12-1/4" swing over cross slide, 3 & 4-jaw chuck, digital read out, 1991, #74706
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: MAKINO
Year: 1991
SERIAL. 15E368, MODEL. MAKINO, YEAR NEW. 1991, SWING OVER WAY. 19", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 80", SPINDLE SPEEDS. 40 TO 1600 RPM, FEEDS.0018 TO.104 IPR, THREADS. 2 TO 112 TPI, 3 JAW CHUCK & 4 JAW. 12" & 15", HARD WAYS. YES, STEADY REST 3 POINT ROLLER. 6" & 9-1/2", 2 SPEED ...more
19" x 80" LeBlond #Regal, engine lathe, 13" swing over cross slide, inch/metric threads, 3-jaw 12" chuck, 7.5 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 11E-304MODEL. REGALACTUAL SWING OVER BED. 19-1/2"SWING OVER CROSS SLIDE. 13"DISTANCE BETWEEN CENTERS. 78"HOLE THRU SPINDLE. 3-1/16"SPINDLE SPEEDS. (12) 40 TO 1600 RPMFEEDS (ENGLISH). (48).0018 TO.104 IPRTHREADS (ENGLISH). (48) 2 TO 112 TPITHREADS (METRIC). (35).3 TO 14 TPMMTHREAD DIAL. YESHARDENED REPLACEABLE ...more
19" x 80" Reed-Prentice, engine lathe, 18" 4-jaw chuck, 1.5" hole, 7.5 HP, L1, 1943
MD Equipment Services LLC | Crooked River, OR
Category: Engine Lathes
Seller: MD Equipment Services LLC
Location: Crooked River, OR
Mfr: Reed-Prentice
Year: 1943
Engine Lathe, Manufacturer: Reed Prentice, Date of Manufacture: August 1943, Serial No.: 32180, Electrics: 220 Volt, 3 Phase, 60 Cycle, Power: 7-1/2 HP Spindle Motor (owner is confirming this spec) / Motor RPM: 3460, s and :, …Swing Over Ways: 18.75”, …Bed Length: 108”, …Distance ...more
19" x 80" Rockford, engine lathe, steady rest, 3 & 4-Jaw chucks, extra jaws, 1-3/4" spindle bore,
MachineCo | Montreal, QC
Category: Engine Lathes
Seller: MachineCo
Location: Montreal, QC
Mfr: Rockford
Capacity: 19″ swing x 80″ between centers, Spindle Bore: 1-3/4″, Hardened bed, Includes:, 3 Jaw chuck, extra jaws, 4 jaw chuck Taper attachment, 3-pt. steady-rest Driver plate, 220V., Capacity: 19″ swing x 80″ between centers, Spindle Bore: 1-3/4″, Hardened bed, Includes:, 3 Jaw ...more
JUST ADDED!
19"/27" x 80" Summit #19-4, manual engine lathe, 16" 4-jaw chuck, 12" 3-jaw chuck, 4-1/8" bore, 22-1500 RPM, D1-8 Camlock nose, L2 spindle taper, Steady Rest
MD Equipment Services LLC | Crooked River, OR
Category: Engine Lathes
Seller: MD Equipment Services LLC
Location: Crooked River, OR
Mfr: Summit
Model: 19-4
Manual Engine Lathe, OEM: Summit Machine Tool Manufacturing Corp., Model: 19-4", Electrics: 220 Volt, 60 Cycle, 3 Phase, Main Motor: 7.5 / 10 HP, s and :,.Swings:,.Over Bed: 19",.Over X-Slide: 10-3/4",.Gap: 27",.Gap Length: 15-3/8",.Spindle :,.Spindle Bore: 4-1/8",.Speeds (12): 22 - 1500 ...more
19" x 80" Summit #19-4, Engine Lathe, Mitutoyo digital read out, tailstock, steady rest, 1991, 19-4x80
Revelation Machinery | Chicago, IL
Category: Engine Lathes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Summit
Model: 19-4
Year: 1991
Make: Summit, Model: 19-4x80, Year: 1991, Machine Location: Idaho, Swing Over Bed: 19″, Swing Over Cross Slide: 10-3/4″, Swing Over Gap: 27″, Gap Length: 15-3/8, Width of the Bed on Slidways: 13-3/8″, Distance Between Centers: 80″, Spindle Speeds: 22-1500 RPM, Feeds:.0007″ ...more
19" x 80" Summit Lathe, 4 Jaw, follow rest, steady rest, taper attach, 7.5 HP
Roskelley Machinery Corp. | Salt Lake City, UT
Category: Engine Lathes
Seller: Roskelley Machinery Corp.
Location: Salt Lake City, UT
Mfr: Summit
Model: 19-4 X 80
SUMMIT 19-4 X 80 LATHE SERIAL #3254301, Swing Over Bed: 19″, Swing Over Cross Slide: 10.75″, Swing Over Gap: 27″, Gap Length: 15-3/8″, Width of the Bed on Slidways: 13-3/8″, Main Spindle Bore: 4-1/8″, Main Spindle Taper: D1-8 Camlock, Morse Taper: No. 5, Tail Stock Sleeve Diameter: ...more
19" x 80" Summit #19X4X80, gap bed engine lathe, inch/metric, 4-jaw 16" chuck, taper attachment, 15 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Summit
Model: 19X4X80
SERIAL., MODEL. 19X4X80, SWING OVER WAYS. 19", SWING IN GAP. 26", DISTANCE BETWEEN CENTERS. 80", SPINDLE SPEEDS. (12) 22 TO 1500 RPM, THREADS (ENGLISH). (56) 3/4" TO 92 TPI, THREADS (METRIC). (34).025 TO 12 MMPI, FEEDS (ENGLISH). (56).0009 TO.112 IPR, FEEDS (METRIC). (56).0235 TO 2.44 MMPR, DIAMETER OF SPINDLE HOLE. ...more
JUST ADDED!
19" x 82" LeBlond Makino #Regal-19, servo shift engine lathe, 12" SOCS, 12" 3-jaw chuck, 3" spindle bore, Newall digital read out, inch/metric, Newall digital read out, tailstock
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: REGAL-19
Spec Sheet:, 19" x 82" LeBlond Makino Engine Lathe, Servo Shift, 3" Spindle Bore, Newall DRO, Inch & Metric Threading, 12" 3 Jaw Chuck, Tailstock, 20" Swing, 82" Between Centers, 12" Over the Cross Slide, 230V 3 Phase Power.
19" x 96" Cincinnati #19, Engine Lathe, 19" Swing, Taper Attatchment, 1970
Revelation Machinery | Chicago, IL
Category: Engine Lathes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Cincinnati
Model: 19
Year: 1970
Make: Cincinnati, Model: 19, Year: 1970, Machine Location: Maryland, Swing 19”, Bed Length 96”, Taper Attachment, Digital Readout, Steady Rests.
19" x 96" Lodge & Shipley #Powerturn, Engine Lathe, 4-Jaw 16" chk, 20 HP, steady rest, 1160 RPM, under power
Deal Makers Machinery | Thousand Oaks, CA
Category: Engine Lathes
Seller: Deal Makers Machinery
Location: Thousand Oaks, CA
Mfr: Lodge & Shipley
Model: POWERTURN
LODGE & SHIPLEY POWERTURN ENGINE LATHE Price: $8,950 Subcategory: Engine Lathes Swing: 19" Centers: 96" Year of Manufacture: 1971 Manufacturer: Lodge & Shipley Model: POWERTURN Condition: Used, 1160 RPM, 4 JAW 16" CHUCK, 20 HP, STEADY REST, UNDER POWER & RUNNING.
JUST ADDED!
19" x 96" Monarch #612, Engine Lathe, 16" swing over cross slide, 10 Hp, 12-1750 Rpm, 2" bore, inch threading, 1967
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Buffalo, NY
Mfr: Monarch
Model: 612
Year: 1967
THIS IS A 1967 MONARCH 612 19'' X 96'' ENGINE LATHE MANUFACTURED BY MONARCH, MODEL 612, AND BUILT IN FEBRUARY 1967. IT OPERATES ON 440V 3PH 60HZ POWER. KEY INCLUDE A 28'' SWING AND A 96'' CENTER SPAN. THE SPINDLE S A THROUGH-HOLE OF APPROXIMATELY 2.06'' AND A D1-6 CAMLOCK NOSE ...more
19" x 102" LeBlond #19-Regal, engine lathe, 10" 3-jaw chuck, 2.75" bore, 10 HP, 1500 RPM, 3 Steady Rest, follow rests, quick chane toolpost w/ holders, tailstock
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL
, Used 19" x 102" LeBlond Regal Engine Lathe with 2 steady and follow rests, 10 hp motor, and 2.75" spindle bore. Includes a quick-change toolpost with holders, tailstock, and more. Ideal for precision machining tasks., Spec Sheet:, 19" x 102" LeBlond Regal Engine Lathe, SERIAL: 8E2304, MODEL: 19" REGAL, SWING OVER ...more
JUST ADDED!
19" x 102" Leblond #19-Regal, Engine Lathe, 12-1/4" swing over cross slide, 10 HP, 1000 RPM, 3 Jaw 10" chuck Follow Rest, Steady Rest, holders & tooling, tailstock
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL
THIS LEBLOND 19" REGAL ENGINE LATHE S A 19-INCH SWING OVER WAYS AND A 13-INCH SWING OVER THE CROSS SLIDE, WITH A DISTANCE BETWEEN CENTERS OF 102 INCHES. IT IS A 10 HORSEPOWER MOTOR AND OPERATES ON 460V, 3 PHASE POWER. THE SPINDLE SPEEDS RANGE FROM 25 TO 1000 RPM, AND THE SPINDLE HOLE DIAMETER IS 2 3/4 INCHES. IT ...more
19" x 102" LeBlond #Makino-Servo-Shift, 10 HP, 1600 RPM, 6-jaw 12" chuck, inch/metric, 1990, TK-21101
Action Machinery Co Inc | Emmaus, PA
Category: Engine Lathes
Seller: Action Machinery Co Inc
Location: Emmaus, PA
Mfr: Leblond
Model: MAKINO-SERVO-SHIFT
CAPACITY, SWING OVER BED AND CARRIAGE WINGS: 19-1/4", SWING OVER CROSS SLIDE: 12-1/4", DISTANCE BETWEEN CENTERS: 102", HEADSTOCK, SPINDLE SPEEDS, NUMBER: 12, SPINDLE SPEED RANGE: 40 TO 1,600 RPM, SPINDLE NOSE: D1-8, SPINDLE HOLE STRAIGHT: 3-1/16", BED, LENGTH, STANDARD: 12’3", WIDTH: ...more
19" x 102" LeBlond #Regal, engine lathe, 13" swing over cross slide, 4-jaw 15" chuck, 10 HP, #74350
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
Year: 2012
SERIAL. 8E2737, MODEL. REGAL, SWING OVER WAYS. 19", SWING OVER CROSS SLIDE. 13", DISTANCE BETWEEN CENTERS. 102", SPINDLE SPEEDS. 25 TO 1000 RPM, SPINDLE HOLE. 1-1/2", STANDARD THREAD. (48) 2 TO 112 TPI, STANDARD FEEDS. (48).0018 TO.104 IPR, CHUCK. 15" 4 JAW, TAPER ATTACHMENT. YES, TREAD DIAL. YES, STEADY REST 3 POINT ...more
19" x 120" LeBlond #6E-Regal, engine lathe, 4-jaw chuck, 25-1000 RPM, 1-13/16" hole, thread dial, 3 point Steady Rest
Yoder Brothers Machinery | Toledo, OH
Category: Engine Lathes
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Leblond
Model: 6E-REGAL
SERIAL. 6E 911 MODEL. REGAL SWING OVER BED. 19" SWING OVER CROSS SLIDE. 12-1/2" DISTANCE BETWEEN CENTERS. 120" SPINDLE SPEEDS. 25 TO 1000 RPM HOLE THROUGH SPINDLE. 1-13/16" THREADS. 2 TO 112 TPI FEEDS.0018 TO.104 IPR THREAD DIAL. YES CHUCK. 4 JAW, FACE PLATE. YES STEADY REST. 3 POINT MOTOR. 7-1/2 HORSEPOWER.
19" x 126" LeBlond #Regal, engine lathe, 12-1/4" swing over cross slide, 15 HP, coolant, 1973, #13607
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
Year: 1973
SERIAL. E2336, MODEL. REGAL, NEW IN. 1973, ACTUAL SWING OVER BED. 19-1/4", DISTANCE BETWEEN CENTERS. 126", SWING OVER CROSS SLIDE. 12-1/4", SPINDLE SPEEDS. (12) 40-1600 RPM, FEEDS. (48).0018-.104 IPR, THREADS. (48) 2-112 TPI, HOLE THRU SPINDLE. 1-3/4", STEADY REST. 6" 3 POINT, CHIP PANS. YES, HARDENED REPLACEABLE BED ...more
19" x 144" LeBlond Makino #15E-Regal, engine lathe, 12" 3-jaw chuck, 3" hole, 40-1600 RPM, inch/metric, 10" Steady Rest, taper attachment
Yoder Brothers Machinery | Toledo, OH
Category: Engine Lathes
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Leblond
Model: 15E-REGAL
SERIAL. 15E-547, MODEL. REGAL MAKINO, SWING. 19", CENTERS. 144", SPEEDS. 40 TO 1600 RPM, SPINDLE HOLE. 3", CHUCK. 12" 3 JAW, FEEDS & THREADING. INCH & METRIC, STEADY REST. 10", TAPER ATTACHEMENT.
19" x 150" LeBlond Makino #Regal-15C, servo-shift engine lathe, 10 HP, 12 1/4" swing over cross slide, inch/metric, 3" hole, digital read out, taper attachment, chuck & Steady Rest, 1992
Wigglesworth Machinery Co | Marblehead, MA
Category: Engine Lathes
Seller: Wigglesworth Machinery Co
Location: Marblehead, MA
Mfr: Leblond
Model: REGAL-15C
Year: 1992
19"x150" LeBlond Makino "Regal" Servo-Shift Engine Lathe, 10 HP, 12 1/4" over cross slide, Inch/Metric, 3" Hole, Digital Read Out, Taper Attachment, Chuck and Steadies., 1992 LE BLOND MAKINO REGAL SERVO SHIFT 15C, Swing. 19.25", Centers. 150", Spindle Bore. 3.1", Power. 10 hp, RPM. 0 RPM, Swing Over Cross Slide. ...more
19" x 150" LeBlond-Makino #19-Regal, servo-shift engine lathe, 12" 3-jaw chuck, 3-1/16" hole, D1-8, Newall Topaz 2-Axis digital read out, inch/metric, 2 roller type Steady Rest, 1992
Machinery Values Inc | Harrison, NJ
Category: Engine Lathes
Seller: Machinery Values Inc
Location: Harrison, NJ
Model: 19-REGAL
Year: 1992
19" x 150" LEBLOND MAKINO SERVO-SHIFT ENGINE LATHEMODEL: 19" REGAL, S/N: 15E-430, NEW: 1992 :SWING OVER BED. 19-1/4"SWING OVER CROSS SLIDE. 12-1/4"DISTANCE BETWEEN CENTERS. 150"SPINDLE NOSE. D1-8" CAMLOCKHOLE THRU SPINDLE.″-1/16"WIDTH OF BED. 14-3/8"SPINDLE SPEED ...more
19-1/4" x 102" LeBlond #19E7, engine lathe, 12-1/4" swing over cross slide, 3-jaw chuck,taper attach, #14187C
Timco Inc | Columbia, TN
Category: Engine Lathes
Seller: Timco Inc
Location: Columbia, TN
Mfr: Leblond
Model: 19E7
Leblond 19-1/4 x 102 Engine Lathe, Mdl# 19E&, S/N# 8E-2543, Headstock. Geared Head, Swing Over Bed. 19, Swing Over Cross Slide. 12-1/4, Swing in Gap. No Gap, Dist Between Centers. 102, Max Turning Length. 102, Spindle Nose. L1, Spindle Hole. 1-3/4, Bed Width. 11-9/16, Spindle Speeds (12). 25 - 1000 RPM, Threading. ...more
19-1/2" x 78" ENCO #11.1-3940 engine lathe, 12" 6-jaw chuck, 3-1/8" hole, 4-way tool post, Accurite 2-Axis digital read out, thread dial
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Enco
Model: 11.1-3940
SERIAL. 000857, MODEL. 111-3940, YEAR NEW. 6/2000, SWING OVER WAYS. 19.685", SWING OVER CROSS SLIDE. 13", DISTANCE BETWEEN CENTERS.78.74", SWING IN GAP. ", LENGTH OF GAP. 12-1/4", SPINDLE SPEEDS. 24 TO 1600 RPM, THREADS ENGLISH. TPI, THREADS METRIC. MMPR, DIAMETER PITCH., FEEDS. ", DIAMETER OF SPINDLE HOLE. 3-1/8", 6 ...more
19-1/2" x 84" LeBlond #Regal, engine lathe, 12-1/4" swing over cross slide, 4-jaw 16" chuck, 10 HP, #69092
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
Year: 1985
SERIAL. 8E2811, MODEL. REGAL, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 84", SPINDLE SPEEDS. (12) 25 TO 1000 RPM, FEEDS. (48).002 TO.108 IPR, THREADS. (48) 2 TO 112 TPI, DIAMETER OF SPINDLE HOLE. 1-49/64", TAPER ATTACHMENT. YES, 4-JAW CHUCK. 16", HARDEN REPLACEABLE WAYS. YES ...more
19-1/2" x 96" LeBlond #Regal, engine lathe, 12-1/4" swing over cross slide, inch/metric, 3-jaw 12" chuck, #73117
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 10E-148, MODEL. REGAL, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 96", SPINDLE SPEEDS. (12) 40 TO 1600 RPM, SPINDLE TYPE. L, FEEDS. (48).0018 TO.104 IPR, THREADS (INCH). 2 TO 112 TPI, THREADS (METRIC).25 TO 14 MM PITCH, DIAMETER OF SPINDLE HOLE. 1-3/4", CHUCK. 12" 3 ...more
JUST ADDED!
19.69" Strojtos Lipnik Lathe, 9.84" swing over rest, 16.54" bed width, 2.2" spindle bore
SMF & Machine Tools Inc | Little Rock, AR
Category: Engine Lathes
Seller: SMF & Machine Tools Inc
Location: Little Rock, AR
Mfr: Strojtos Lipnik
Year: 1998
Swing over Bed 19.69'' Swing over rest 9.84'' Bed Width 16.54'' Spindle Bore 2.2'' Spindle Taper Morse 6.
20" x 40" Kingston #HL-1000, lathe frame, new, Taiwan, ready for retrofit, bed, headstock hi / lo, saddle, tailstock
Yancey Machine Tool Co | Portland, OR
Category: Engine Lathes
Seller: Yancey Machine Tool Co
Location: Portland, OR
Mfr: Kingston
Model: HL-1000
20" x 40" Nardini #SZ2040T, engine lathe, 12-1/2" swing over cross slide, 3-1/8" hole thru spindle, inch/metric threads, 3-jaw chuck, 2-Axos digital read out, 12.5 HP
iGAM | Detroit, MI
Category: Engine Lathes
Seller: iGAM
Location: Detroit, MI
Mfr: Nardini
Model: SZ2040T
This listing is for a Nardini #SZ2040T Engine Lathe., Manufacturer: Nardini, Serial: D3JDR130, Model: SZ-2040T, Swing Over Bed: 20", Swing in the Gap: 27-1/2", Swing Over Cross Slide: 12-1/2", Distance Between Centers: 40", Spindle Speeds: (18) 19 to 1500 RPM, Hole Through Spindle: 3-1/8", Threads, Inch: (64) 2-3/4 to ...more
JUST ADDED!
20" x 40" HH Roberts #CDS2040C, Toolroom Lathe, 4-1/4" spindle bore, 10" 3-jaw chuck, 14-1/2" 4-jaw chuck, 19" faceplate, 1700 RPM, 2-axis Acrite digital read out, 600 Volt, 3PH
Trader Machinery Inc | Concord, ON
Category: Engine Lathes
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Roberts
Model: CDS2040C
20"40"4-1/4"26 - 1700 RPM600 V / 3 / 60.
JUST ADDED!
20" x 40" Victor/Taichung Machinery #400X1000, Lathe, w/Tail Stock & Tool Post, 10" 3-Jaw Chuck, 2" Bore, 7.5 Amps
HGR24 | Euclid, OH
Category: Engine Lathes
Seller: HGR24
Location: Euclid, OH
Mfr: Victor/taichung Machinery
Model: 400X1000
Inventory No. 0326-124-0002 Manufacturer Victor / Taichung Machinery Model No. 400X1000 Name Lathe Arrival Date 04-03-2026 Dimensions L x W x H (inches) 84 x 40 x 59 Capacity 20" X 40" Weight (lb.) 3285 Category Machine Tools Condition Used Available Quantity 1 Serial No. 563442 Item Heidenhaln Controls, Tail Stock ...more
20" x 40" Howa Sangyo #1000, engine lathe, 3-jaw chuck, 2" bore, 60-1500 RPM, toolpost holder, coolant
Westway Machinery Ltd | Mississauga, ON
Category: Engine Lathes
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Model: 1000
, TOOLPOST HOLDERCOOLANT SYSTEMDUAL DIALS, ENGLISH–METRIC 3 JAW CHUCK, MODEL: 1000, SERIAL NO.: 10427, SWING OVER BED: 20”, SWING OVER CROSS SLIDE: 9.5”, DISTANCE BETWEEN CENTRES: 40”, SPINDLE BORE: 2”, SPINDLE SPEEDS: 60-1,500 RPM, WEIGHT: 5,000 LBS, DIMENSIONS (LxWxH): 87” x ...more
20" x 40" Howa Sangyo #1000, engine lathe, 3-jaw chuck, 2" bore, 60-1500 RPM, toolpost holder, coolant
Westway Machinery Ltd | Mississauga, ON
Category: Engine Lathes
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Model: 1000
, TOOLPOST HOLDERCOOLANT SYSTEMDUAL DIALS, ENGLISH–METRIC 3 JAW CHUCK, MODEL: 1000, SERIAL NO.: 10441, SWING OVER BED: 20”, SWING OVER CROSS SLIDE: 9.5”, DISTANCE BETWEEN CENTRES: 40”, SPINDLE BORE: 2”, SPINDLE SPEEDS: 60-1,500 RPM, WEIGHT: 5,000 LBS, DIMENSIONS (LxWxH): 90” x ...more
20" x 54" LeBlond #19-Regal, servo-shift eng" e lathe, 12" 3-jaw Bison chuck, 3" bore, 40-1600 RPM, 7.5 HP, taper attachment, tailstock, Dorian toolpost
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL
, LEBLOND 19" x 54" Regal Servo Shift Lathe, used, s a 19" swing, 54" centers, 1.5" spindle bore, 5 hp, and 1500 RPM. Includes taper attachment, tailstock, Dorian toolpost, and 12" 3-jaw Bison chuck. Ideal for precise machining tasks., Spec Sheet:, 20" x 54" LeBlond Regal Servo Shift Engine Lathe w/Taper, Swing Over ...more
20" x 54" LeBlond #HeavyDuty, 13" SOCS, 3-jaw 18" chk, 2" hole, taper, 10 HP, #71579
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: HEAVYDUTY
SERIAL. 2NB708, MODEL. HEAVY DUTY, SWING OVER WAYS. 20", SWING OVER CROSS SLIDE. 13", DISTANCE BETWEEN CENTERS. 54", SPINDLE SPEEDS. (12) 14 TO 1800 RPM, FEEDS. (48).0011 TO.675 IPR, THREADS (INCH). (48) 2 TO 120 TPI, DIAMETER OF SPINDLE HOLE. 2", 3 JAW CHUCK. 18", TAPER ATTACHMENT. YES, THREAD DIAL. YES, HARD WAYS. ...more
20" x 54" Lodge & Shipley #2013, ' Answer AVS' Lathe, 13.5" Cross Slide, D1-6 Camlock, 25-1500 RPM variable, 15 HP
Norman Machine Tool Ltd | Baltimore, MD
Category: Engine Lathes
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Lodge & Shipley
Model: 2013
Lodge & Shipley 20″ x 54″ ‘Answer AVS’ Lathe, 2013, Inventory # 9640, Model: 2013, S/N: 46529, Capacity:, Swing Over Bed: 20 1/2″, Swing Over Cross Slide: 13 1/2″, Distance Between Centers: 54″, Headstock:, Spindle Nose: D1-6 Camlock, Hole Thru Spindle: 2″, Spindle ...more
JUST ADDED!
20" x 54" Monarch #610, Engine Lathe, 16" swing over cross slide, 10 Hp, 1500 Rpm, 2-1/4" bore, 12" chuck, 1978
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Monarch
Model: 610
Year: 1978
THIS MONARCH MODEL 610 IS AN ENGINE LATHE WITH A CAPACITY DEFINED BY A 20-INCH SWING AND 54-INCH DISTANCE BETWEEN CENTERS. THE MACHINE IS DRIVEN BY A 10 HP, 240V, 3-PHASE MOTOR, ALLOWING FOR A MAXIMUM ROTATIONAL SPEED OF 1,500 RPM. ITS SPINDLE S A 2.25-INCH BORE AND A D1-6 MOUNT, WHICH IS FITTED WITH A 12-INCH 3-JAW ...more
20" x 54" Monarch #610, engine lathe, 12" 3-jaw chuck, D1-6, 2.25" bore, quick change toolpost
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Monarch
Model: 610
, Used 20" x 54" Monarch Model 610 Engine Lathe, perfect for precision machining tasks. s include 20" swing, 54" centers, and 2.25" spindle bore. a 12" 3-jaw chuck and quick-change toolpost, powered by 10 HP for efficient performance., Spec Sheet:, 20" x 54" Monarch Model 610 Engine Lathe, Model 610, S/n 47050, 12" 3 ...more
20" x 54" Monarch #610, engine lathe, 13" swing over cross slide, 3-jaw 15" chuck, 2" spindle hole diameter, AcuRite 2-Axis digital read out
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Monarch
Model: 610
Year: 1978
SERIAL. 46406, MODEL. 610, SWING OVER WAYS. 20", DISTANCE BETWEEN CENTER. 54", SWING OVER CROSS SLIDE. 13", SPINDLE SPEEDS. (24) 12 TO 1500 RPM, FEEDS. (66).0013 TO.0821 IPR, THREADS. (66) 2 TO 120 TPI, DIAMETER OF SPINDLE HOLE. 2", SWIVEL COMPOUND. YES, CHUCK. 15" 3 JAW, THREAD DIAL. YES, TRAVEL DIAL. YES, HARDEN ...more
20" -26" x 57" -80" Kent USA #Ml-2060, 2280, HW-26, MD-55, HW-30, Manual Precision Lathe, new, (7 available)
Blumberg Machinery Co | Bannockburn, IL
Category: Engine Lathes
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Kent
Model: ML-2060
20" x 44" KENT USA ML-2060VT MANUAL PRECISION LATHE - NEWPRODUCT HIGHLIGHTS7.5 HP Spindle Motor, 12-Speeds3.125 Spindle Through HoleSolid Full Length Casting Base with Front Loading Chip Tray for Easier CleaningAdjustable Over-load Feed ClutchesQuick Reversal Feed from ApronFull-length Safety Foot BrakeSpindle Jog ...more
20"/24" x 57" Milltronics #HML2060, engine lathe, 12" gap length, 3" hole, 30-2200 RPM, thread dial, taper attachment, 6" Steady Rest
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Milltronics
Model: HML2060
SERIAL. 2060305346, MODEL.HML2060, SWING. 20", CENTERS. 57", SWING OVER CROSS. 14", SWINN IN GAP. 24", GAP LENGTH. 12", DIAMETER OF SPINDLE HOLE. 3", SPINDLE SPEEDS. 30 TO 2200 RPM, THREAD DIAL. YES, TAPER ATTACHMENT. YES, STEADY REST. 6", MOTOR. 7.5 HORSEPOWER.
JUST ADDED!
20" x 60" Colchester #Triumph, Engine Lathe, (1) 3-jaw chuck, (1) 4-jaw chuck, digital read out
Hariton Machinery Co Inc | Bridgeport, CT
Category: Engine Lathes
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Colchester
Model: TRIUMPH 2000
60" Bed, 20" Swing, 3 Jaw, 4 Jaw, DRO.
20" x 60" Ganesh #GTW-2060, geared head engine lathe, 10 HP, 10-1550 RPM, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Ganesh
Model: GTW-2060
20” X 60” Engie Lathe with 10 HP Heavy Duty Spindle Motor, 12 Speed Geared Head, Chuck Guard with Micro-Switch to Control Spindle, Inch / Metric Diametral & Modular Threading Capabilities w/o Changing Gears, Automatic Way Lubrications with Filtered Pressure Lubrication System and Flood Coolant System. ...more
20" x 60" Lodge & Shipley, engine lathe, 16" swing over cross slide, taper attach, tool holder, 3 HP, #10521
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Lodge & Shipley
SERIAL. 34593, MAXIMUM SWING OVER WAYS. 23", SWING OVER CROSS SLIDE. 16", DISTANCE BETWEEN CENTERS. 60", SPINDLE SPEEDS. (24) 9 TO 500 RPM, FEEDS. (60).005 TO.025 IPM, THREADING. (60) 1 TO 64 TPI, DIAMETER OF HOLE IN SPINDLE. 2-1/2", CROSS TRAVEL OF CROSS SLIDE. 16", TAPER ATTACHMENT. YES, TOOL HOLDER. YES, MAIN ...more
20" x 60" Monarch #62/2013, engine lathe, 4-jaw 15" chuck, chip pan, 10 HP, #73843
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Monarch
Model: 20 X 060 MDL 62/2013
SERIAL. 43445 RMODEL. 62/2013SWING OVER WAYS. 20"SWING OVER CARRIAGE. 12"DISTANCE BETWEEN CENTERS. 60"SPINDLE SPEEDS. 14 TO 1750 RPMSPINDLE HOLE. 2"THREADS. 2 TO 120 TPIFEEDS.0011 TO.06834 JAW CHUCK. 15"HARD WAYS. YESTHREAD DIAL. YESMICRO CARRIAGE STOPS. YESFORWARD & REVERSING. YESCHIP PAN. YESMOTOR. 10 HORSEPOWER.
20" x 60" Mori Seiki #MR-1500G, toolroom lathe, 4-jaw 18" chuck, steady & follow rest
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: Engine Lathes
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Mori Seiki
Model: MR-1500G
20" X 60" MORI SEIKI MR-1500G TOOLROOM ENGINE LATHE, 18" 4-JAW CHUCK, Swing over bed. 20", Swing over cross slide. 11", Swing in gap. 26", C to C. 59", Spindle nose. D6, Spindle bore 2", Spindle motor 10hp 3 phase, Spindle speed range. 28 - 1350rpm, Tailstock #5 Morse taper Steady & follower rest, Carriage stop ...more
20" x 60" Sharp #2060C, gap bed engine lathe, inch/metric threads, 3-jaw 12" chuck, 2-Axis Sony digital read out, 1999
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Sharp
Model: 2060C
Year: 1999
SERIAL. 8806116, MODEL. 2060GW, YER NEW. 1999, SWING OVER WAYS. 20", SWING IN GAP. 28-1/2", SWING OVER CARRIAGE. 11-1/2", DISTANCE BETWEEN CENTERS. 60", SPINDLE SPEEDS. 15 TO 1500 RPM, HOLE THRU SPINDLE. 3-1/8", THREADS ENGLISH. 2 TO 56 TPI, THREADS METRIC. 0.5 TO 7MM, TAPER ATTACHMENT. YES, FEEDS. 0.002 TO 0.28 IPR ...more
20" x 60" Summit #20-4X60, Engine Lathe, 12" 3-jaw chuck, 6 pos. bed turret, tailstock, steady rest
Smith Machinery Co | Ames, IA
Category: Engine Lathes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Summit
Model: 20-4X60
Swing Over Bed 20.125 inches Swing Over Cross Slide 11.875 inches Swing Over Gap 27.625 inches Gap Length 15 inches Hole Through Spindle 4.125 inches Threads Inch.125 60 (64) Threads Metric.5 120 mm ( 64 ) Diameter of 3-Jaw Chuck 12 inches Longitudinal Feeds Range.00145.44474 (124) Cross Feeds Range.0007.22237 (124) ...more
20" x 60" Summit #20-x-60-B, Precision Engine Lathe, 11.875" Cross Slide, D1-8 Camlock, (15) 11.5-1400 RPM, 10 HP, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Engine Lathes
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Summit
Model: 20-X-60-B
Summit 20″ x 60″ Precision Engine Lathe, Inventory # 8057, Model: 20 x 60 B, European Quality Machine, Capacities:, Swing Over Bed: 20 1/4″, Distance Between Centers: 60″, Swing Over Cross Slide: 11 7/8″, Workpiece Weights:, @ the Headstock: 400 lbs., Between Chuck and Tailstock: 2,000 ...more
20" x 60" Tarnow #TUJ50X1500, gap bed engine lathe, 13-1/2" swing over cross slide, inch/metric, 4-jaw 15" chuck
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tarnow
Model: TUJ50X1500
SERIAL. 11-1442MODEL. TUJ 50X1500SWING OVER WAYS. 20"SWING IN GAP. 30"SWING OVER CROSS SLIDE. 13-1/2"DISTANCE BETWEEN CENTERS. 60"SPINDLE SPEEDS. (18) 35 TO 1800 RPMTHREADS (ENGLISH). 70 | 1/4 TO 56 TPITHREADS (METRIC). 0.04 TO 28 MMFEEDS. 0.0036 TO 0.086 IPRDIAMETER OF HOLE IN SPINDLE. 2"CHUCK. 15" 4-JAWTAPER ...more
JUST ADDED!
20" x 60" Victor #S2060G, gap bed engine lathe, 11-1/2" swing over cross slide, Bisn 3-jaw chuck, missing parts'
Equipment Hub | Decatur, GA
Category: Engine Lathes
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Victor
Model: S2060G
Stock #: 210250065, Location: Decatur, Ga, Brand: Victor, Model: S2060G, Serial #: 780797, Approx. Shipping Weight: 5,000 Lbs., Approx. Shipping Dimensions: 9' L x 4' 5" W x 6' 7" H, Skidding Fee: Skidding Unavailable, Swing Over Bed: 20", Swing Over Cross Slide: 11-1/2", Distance Between ...more
20" x 60" Voest #DA250/1.5, engine lathe, 13-1/2" swing over cross slide, 3-jaw 12" chuck, 5 HP, 1979, #74251
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Voest
Model: DA250/1.5
Year: 1979
SERIAL. 1-0004/691, MODEL. DA250/1.5, YEAR NEW. 1979, SWING OVER WAYS. 20", SWING OVER CROSS SLIDE. 13-1/2", DISTANCE BETWEEN CENTERS. 60", SPINDLE SPEEDS. 33 TO 1500 RPM, LONGITUDINAL FEEDS. 0.0028 TO 0.0 212 IPR, THREADS. 1/2 TO 92 TPI, METRIC THREADS. 0.5 to 28 MMPR, DIAMETER OF SPINDLE HOLE. 2-3/8", 3 JAW CHUCK. ...more
20" x 60" Webb Whacheon, 3" bore, 28-1350 RPM, tool holder, Steady Rest, 6-Jaw chuck, Trav-A-Dial on carriage, coolant, worklight, #A6831
Sterling Machinery Exchange | South El Monte, CA
Category: Engine Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Webb
Model: A6831
Swing Over Bed 20" Distance Between Centers 60" Speed 28-1350 RPM Swing 20" Hole Taper Spindle 3-1/8" Horsepower 7.5 s 2 Steady Rest Coolant System Foot Brake Micro Bed Stop 6 Jaw Chuck Trav - A - Dial Hole Size Thru Spindle 3-1/8".
20" x 62" HMT #A24UP/1500, engine lathe,,AcuRite 2-Axis digital read out, inch/metric, 6-jaw 12" chuck, #73210
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Hmt
Model: A24UP/1500
SERIAL. 2526, MODEL. A24UP/1500, SWING OVER WAYS. 20", SWING OVER CROSS SLIDE. 12-1/2", DISTANCE BETWEEN CENTERS. 62", SPINDLE SPEEDS. 45 TO 500 RPM, FEEDS.0009 TO.0320 IPR, THREADS (INCH). 1 TO 56 TPI, THREADS (METRIC).05 TO 36 MM PITCH, DIAMETER OF SPINDLE HOLE. 2-1/2", CHUCK. 12" 6-JAW, SPINDLE FORWARD AND REVERSE. ...more
20" x 66" Wafum, engine lathe, 12-1/8" swing over cross slide, 4-jaw 16" chuck, 10 HP, inch/metric, #73260
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Wafum
Year: 1989
SERIAL. 34526, SWING OVER WAYS. 20", SWING OVER CROSS SLIDE. 12-1/8", DISTANCE BETWEEN CENTERS. 66", SPINDLE SPEEDS. (36) 18 TO 1800, FEEDS. (42) 0.0031 TO.233 IPR, THREADS (INCH). 1 TO 88 TPI, THREADS (METRIC).25 TO 88 MM PITCH, DIAMETER OF SPINDLE HOLE. 3", CHUCK. 16" 4-JAW, CROSS FEED DIAL GRADUATIONS. INCH AND ...more
20" x 72" H.E.S., engine lathe with metric threading,loaded with tooling, 18-900 RPM, 15 HP
TNT Industrial | Orange, CA
Category: Engine Lathes
Seller: TNT Industrial
Location: Orange, CA
Mfr: H.e.s.
HES 20″ x 72″ Engine Lathe. Spindle Speeds: 18 – 900 RPM. Capacity – 20″ x 72″. Swing Over Bed – 20″. Swing Over Cross Slide – 15″. Horsepower: 15 H.P..
20" x 72" LeBlond #Regal, engine lathe
G-2000 | Toledo, OH
Category: Engine Lathes
Seller: G-2000
Location: Toledo, OH
Mfr: Leblond
Model: REGAL
Machine Type.Lathes, Engine Manufacturer.LEBLOND Model.N/A Year.N/A Condition.Used.
20" x 72" LeBlond #Regal-20, geared head, 4-jaw 15" chuck, 2" hole, L-1, Steady Rest, #4MT, coolant pump, chip tray, splash guard, s/n #7E1436, #A4427
Sterling Machinery Exchange | South El Monte, CA
Category: Engine Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Leblond
Model: REGAL-20
Swing Over Bed 20" Swong Over Cross Slide 12" Distance Between Centers 72" Spindle Speeds (12) 25 - 1,500 RPM Spindle Nose L-1 Hole Thru Spindle 2" Threads: Inch (48) 2-112 TPI Feeds (48).0023" -.132" Cross Slide Travel 11-1/4" Tail Stock Taper #4 MT Tail Stock Quill Travel 7" Horsepower 7-1/2 H.P. Dimensions ( L x W ...more
20" x 72" Monarch #20CM, engine lathe, 13" swing over cross slide, 4-jaw 21" chuck, 10 HP, taper attach, #59043
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Monarch
Model: 20CM
SERIAL. 27496, MODEL. 20CM, SWING OVER WAYS. 22-1/2", DISTANCE BETWEEN CENTER. 72", SWING OVER CROSS SLIDE. 13", SPINDLE SPEEDS. (12) 9 TO 400 RPM, FEEDS. (48).005 TO.240 IPR, THREADS. (48) 3/4 TO 46 TPI, DIAMETER OF SPINDLE HOLE. 2-1/4"", TAPER ATTACHMENT. YES, SWIVEL COMPOUND. YES, CHUCK. 21" 4 JAW, HARDEN WAYS. ...more
20" x 72" Mori Seiki #MR-2000, engine lathe, 4-jaw 13.75" chuck, 10 HP, #5MT, #71131
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Mori Seiki
Model: MR-2000
SERIAL. 1952, MODEL. MR 2000, SWING. 20", SWING OVER CROSS. 12", CENTER DISTANCE. 72", SPINDLE SPEEDS. (12) 28 TO 1350 RPM, THREADS. (35) 4 TO 80 TPI, FEEDS. (64).0009 TO.0196 IPR, SPINDLE HOLE. 2-1/8", THREAD DIAL. YES, COOLANT. YES, CHUCK. 13.75" 4 JAW, TAILSTOCK TAPER. #5 MORSE, MOTOR. 10 HP.
20" x 76" Sydney, 14" swing over carriage, 12" 3-jaw cam lock, 12" 4-jaw chuck, 2" spindle bore, 30-2000 RPM, steady rest
Toolquip Inc | Lebanon, OH
Category: Engine Lathes
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Sydney
Model: 20 X 76
Used engine lathe available. s a 12" 3-jaw cam lock, 12" 4-jaw chuck, 2" spindle bore, speed range of 30-2000 RPM, 14" swing over carriage, and comes a steady rest., 12" - 3 JAW - CAM LOCK, 12" 4 - JAW CHUCK, 2" SPINDLE BORE, 30-2000 RPM, 14" SWING OVER CARRIAGE.
JUST ADDED!
20" x 78" Bochi #CS6250C, gap lathe, 11.81" swing over cross slide, AcuRite digital read out, 3-jaw 12" chuck, 7.5 HP, 2010
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bochi
Model: CS6250C
Year: 2010
SERIAL., MODEL. CS6250C, YEAR NEW. 2010, SWING OVER WAYS. 19.685", SWING OVER CROSS SLIDE. 11.811", SWING IN GAP. 27.9528", DISTANCE BETWEEN CENTERS. 78.74016", SPINDLE SPEEDS. 36 TO 1600 RPM, DIAMETER OF SPINDLE HOLE. 4-1/8", THREADS STANDARD. 2" TO 56 TPI, THREADS METRIC.1 TO 14 MM, FEEDS STANDARD.0027 TO 1.07 IPR ...more
20" x 78" LeBlond, 20-1/2" swing o/bed, 13-1/2" swing OCS, 16-1010 RPM, #17676
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: 20 X 078
SERIAL. NE6469, SWING OVER BED. 20-1/2", SWING OVER CROSS SLIDE. 13-1/2", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (24) 16 TO 1010 RPM, FEEDS. (60).0025" TO.152" IPR, THREADS. (60) 1 TO 60 TPI, DIAMETER OF SPINDLE HOLE. 1-3/4", CHUCK. 12" 3-JAW, TAILSTOCK TAPER. 4MT, TAPER ATTACHMENT. YES, CARRIAGE STOP. YES ...more
20" x 78" Lodge & Shipley #Powerturn-2013, 3-jaw 12" chk,hard ways,threading dial, #5MT, 24-1740 RPM
Mohawk Machinery Inc | Cincinnati, OH
Category: Engine Lathes
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Lodge & Shipley
Model: POWERTURN-2013
20"/20.5" x 78" LODGE & SHIPLEY "POWERTURN", ENGINE LATHE, Serial No 44594, Model 2013, Series "POWERTURN", 20"/20.5" x 78" LODGE & SHIPLEY "POWERTURN", ENGINE LATHE, Serial No 44594, Model 2013, Series "POWERTURN", 12" 3-Jaw Chuck w/Jaws, Hard Ways (Replaceable), Threading Dial, CATALOG :, Hole Thru Spindle. ...more
20" x 80" LeBlond #Regal, 12" chuck, 1.75" spindle bore, quick change toolpost, taper turning attach
Smith Machinery Co | Ames, IA
Category: Engine Lathes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Leblond
Model: REGAL
Chuck Size 12 inches Swing over the bed 20 inches Swing over the carriage 13 inches Between Center 80 inches Spindle Bore 1.75 inches, * Quick change tool post., * Taper turning attachment, * Hardened Bedways.
20" x 80" Longem #LG-2080DS, gap bed engine lathe, 11" SOCS, 4-jaw 16" chuck, digital read out, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Longem
Model: LG-2080DS
SERIAL. 120757, MODEL. LG-2080DS, SWING OVER WAYS. 20", SWING OVER CROSS SLIDE. 11", SWING IN GAP. 28", DISTANCE BETWEEN CENTERS. 80", SPINDLE SPEEDS. (24) 18 TO 1600 RPM, DIAMETER OF SPINDLE HOLE. 3-1/8", RAPID TRAVERSE. 4 WAY, LONGITUDINAL FEEDS. 0.0011 TO.064 IPR, THREADS METRIC. 0.5 TO 96 MM, 4-JAW CHUCK. 16", 2 ...more
20" x 80" Mazak, engine lathe
Harris Machine Tools, Inc. | Houston, TX
Category: Engine Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Mazak
3 Jaw chuck, Taper Attachment, inch / mm threading, Steady Rest, chip pans.
20" X 80" Nardini #SZ-2080T, Engine Lathe, 12 HP, 3" bore
Smith Machinery Co | Ames, IA
Category: Engine Lathes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Nardini
Model: SZ-2080T
Swing 20 inches Power 12 horsepower Spindle Bore 3 inches Centers 80 inches.
JUST ADDED!
20" x 80" Summit #20X80B, Engine Lathe, 16" bed width, 15" gap length, 13-1/4" swing over cross slide, 4-1/8" spindle bore, 30" swing in gap, 10 HP, 1400 RPM, 2015
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: 20X80B
Year: 2015
Here We Have:, SUMMIT 20″-4 x 80″ B Heavy Duty Lathe, X 4 1/8” Spindle Bore, 2 Axis Newall DRO, 4 Way Rapid Traverse, With built in Inch / Metric Threading, Taper Attachment, Make: Summit, Model:20X80B (Bulgarian), Serial Number: 41038, New in: 2015, Swing over bed: 20 ¼”, Distance ...more
20" x 80" Summit #20X80B, Heavy-Duty Engine Lathe, 4-1/8" spindle bore, 10 HP main motor, 1400 RPM, 2-axis Newall digital read out, 220 Volts, 3PH, 2015
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: 20X80B
Year: 2015
Here We Have:, SUMMIT 20″-4 x 80″ B Heavy Duty Lathe, X 4 1/8” Spindle Bore, 2 Axis Newall DRO, 4 Way Rapid Traverse, With built in Inch / Metric Threading, Taper Attachment, Make: Summit, Model:20X80B (Bulgarian), Serial Number: 41038, New in: 2015, Swing over bed: 20 ¼”, Distance ...more
20" x 80" Summit #20x80B, Heavy-Duty Engine Lathe, 13-1/4" swing over cross slide, 5" compound travel, 4-1/8" spindle bore, 10 HP, 1400 RPM, 2-axis Newall digital read out, 220 Volt, 2016
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: 20X80B
Year: 2016
Here We Have:, SUMMIT 20″-4 x 80″ B Heavy Duty Lathe, X 4 1/8” Spindle Bore, 2 Axis Newall DRO, 4 Way Rapid Traverse, With built in Inch / Metric Threading, Taper Attachment, Make: Summit, Model:20X80B (Bulgarian), Serial Number: 41569, New in: 2016, Swing over bed: 20 ¼”, Distance ...more
20" x 80" Tos #SN50C, 27" swing in gap, 22-2000 RPM, 3 & 4-Jaw, taper, steady rests, 7.5 HP, 1990
Piedmont Machy of Charlotte | Charlotte, NC
Category: Engine Lathes
Seller: Piedmont Machy of Charlotte
Location: Charlotte, NC
Mfr: Tos
Model: SN50C
Year: 1990
20" x 80" Victor #20x80, engine lathe, 13" SOCS, 4-jaw 12" chuck, inch/metric threads, #5MT, 10 HP
N & R Machine Sales | Navasota, TX
Category: Engine Lathes
Seller: N & R Machine Sales
Location: Navasota, TX
Mfr: Victor
Model: 20X80
20" X 80" Victor Engine Lathe, Stock Number: L3000208, Victor 20X80, Serial No. 710410, Swing Over Bed Ways 20", Swing Over Cross Slide 13", Gap Length 6", Swing In Gap 26-3/8", Center Distance 80", Bed Way Width 15-3/4", Spindle Thru Hole 3", Spindle Speeds (12 Steps) 20 To 1,550 Rpm's, Spindle Nose D1-8, Chuck ...more
JUST ADDED!
20" x 84" Timemaster, Lathe, 3" bore, tailstock, tool post
HGR24 | Euclid, OH
Category: Engine Lathes
Seller: HGR24
Location: Euclid, OH
Mfr: Timemaster
Inventory No. 0426-100-0001 Manufacturer Timemaster Name Lathe Arrival Date 04-22-2026 Dimensions L x W x H (inches) 150 x 61 x 53 Capacity 20” X 84” Weight (lb.) 5970 Category Machine Tools Condition Used Available Quantity 1 Item Tool Post, Tail Stock, 3” Bore.
20"/25" x 84" Voest, Engine Lathe w/Gap, 14.5" Swing over crosslide, 126" L x 40" F-B x 52" H,
MachineCo | Montreal, QC
Category: Engine Lathes
Seller: MachineCo
Location: Montreal, QC
Mfr: Voest
Ready to work. Includes free loading and all paperwork. Let us get you the best economical quote, on truck at your door!, Vost Engine Lathe, Capacity, Swing: 20″/25″ x 84″, Swing over crosslide: 14-1/2″, Dim. L.126″ x 40 F-B x H.52″, Weight. (est.). 3500 lb., Equipped:, 3-jaw chuck ...more
20" x 96" Monarch #20X096, 10" chk, 3-jaw, 1-9/16" hole, Mitutoyo 1-Axis digital read out, #15629
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Monarch
Model: 20X096
SERIAL. 13907, MODEL. 18"CBB, SWING OVER BED - ACTUAL. 20-1/2", SWING OVER CROSS SLIDE. 12", DISTANCE BETWEEN CENTERS. 96", HOLE THRU SPINDLE. 1-9/16", SPINDLE SPEEDS. (16) 14 TO 600 RPM, FEEDS. (48).0038 TO.240 TPI, THREADS. (48) 1-1/2 TO 92 TPI, CHUCK. 10" 3-JAW, TAPER ATTACHMENT. YES, THREAD DIAL. YES, MICROMETER ...more
20" x 96" Monarch #Series-60, engine lathe, 3-jaw chuck, 17-700 RPM, Newall 2-Axis digital read out
Greenway & Associates Ltd | Orange City, IA
Category: Engine Lathes
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Monarch
Model: SERIES-60
, 3 jaw chuck w/reversible jaws, 4 way tool post, Large capacity roller type steady rest, Newall 2 axis DRO, *Feeds are in millimeters*, **Machine is USA built but shipped to Germany**.
20" X 98" Tarnow #TUJ-50-X-3000, Engine Lathe Grinding Attachment, 20.86" swing, 13" swing over saddle, 30" swing over gap, 98.42" centers, 16 spindle speeds, 25-1250 RPM spindle, 2.06" bore
Revelation Machinery | Chicago, IL
Category: Engine Lathes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Tarnow
Model: TUJ-50-X-3000
Year: 1978
Make: Tarnow, Model: TUJ 50 x 3000, Year: 1978, Machine Location: New Jersey, Admits between centers: 98.42″, Height of centers over bed: 10.23″, Height of centers over saddle: 6.49″, Swing over bed (dia.): 20.86″, Swing over saddle (dia.): 13″, Swing over gap (dia.): 30″, Gap ...more
20" x 100" LeBlond, heavy duty engine lathe w/ hydraulic tracer attachment
Peterson Machinery Sales | Casa Grande, AZ
Category: Engine Lathes
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Mfr: Leblond
Manufacturer LeBlond Condition Used Stock Number 4196.
20" x 115" Axelson #20, manual engine lathe, 20" 4-jaw chuck, 2-3/8" hole, Steady Rest
MD Equipment Services LLC | Crooked River, OR
Category: Engine Lathes
Seller: MD Equipment Services LLC
Location: Crooked River, OR
Mfr: Axelson
Model: 20
Manual Engine Lathe, OEM: Axelson (Los Angeles), Model: 20, Serial No.: 2575, Electrics: 220-440 Volt, 60 Cycle, 3 Phase, 27-13.5 Amp, Motor: 10 HP, 1800 RPM @ 60 Cycle, s and :,.Spindle Speeds (24): 9.5 - 721 RPM,.Nominal Size: 20",.Maximum Swing: 23-5/8",.Distance Between Centers: 115",.Length of Bed: ...more
