go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Dust Collectors in West Virginia

warning
33 Results

257 cfm, Zeppelin Reimelt #DS-955, Stainless Steel venting dust filter receiver collector, 103 sq.ft.

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Model: DS-955
Used Reimelt Stainless Steel Venting Dust Filter Receiver Collector - 257CFM, Model DS - Shock pressure resistant jet venting filter for fine dust venting, Stainless steel separation housing mounted below an aluminum filter housing, Total Filter Area: 103 Sq/Ft, Filter Housing (upper): 38" X 48" tall, Contains ...more

262 cfm @ 88" S.P., Spencer Turbine #SYS90132B-MOD, fast-vac system, 4.2 HP

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Model: SYS90132B-MOD
Used 4.2 HP Spencer 262 CFM Fast-vac System - SYS90132B-MOD, 262CFM, @ 88" SP Pressure, @ 79" SP Vacuum, Integrated Spencer VB37 series Vortex regenerative blower (Fan speed: 2850RPM), Power requirement: 190/380-415 volt, 60Hz, 3 phase, Forklift portable, Demonstration video on file.

280 cfm, Smoot Co., Carbon Steel dust collector w/ rotary air lock, 40 sq.ft., vacuum filter receiver 48FR7

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Used 280 CFM (40 sq. Ft.) Smoot Co. Vacuum Filter Receiver 48FR7 w/ Airlock, Smoot Dust Collector with Rotary Airlock, 3" & 5" Dirty Air Inlets, 10" Smoot Airlock mounted to material outlet, Will accept (7) 5.75" x 48" L Bags (Cages included only, No Bags included), Bottom load, side removal ...more

400 cfm Flexicon, Stainless Steel Dust Collector w/ Fan, 10" diameter x 18" L Cartridge filter, 1/2 HP

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Flexicon
Used 400 CFM Flexicon Stainless Steel Dust Collector With Fan, designed for 10" dia. X 18" L. Cartridge filter. (new filter required) 5" Cincinnati Fan model pb-9, S/N 700443-1, cast aluminum centrifugal blower driven by a Leeson washguard 1/2hp, 3450 rpm, direct drive motor. Collector housing is ...more

400 Scfm Spencer Turbine Company #70x15 #1, Vacuum Producer, 7" Hg, 15 HP

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Spencer
Model: 70X15
Used 15HP Spencer Vacuum Producer - 400 SCFM @ 7" HG, Demonstration video available.

Get email updates for newly added Dust Collectors

420 cfm Smoot Co., dust collector w/ rotary airlock valve, #16621

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Smoot Co.
Model: 16621
Used 420 CFM (60 sq ft.) Smoot Dust Collector with Rotary Airlock Valve, Smoot Dust Collector with Rotary Valve, 3" & 4" Dirty Air Inlets, ~13' H Overall, 29" ID, 12" Round to Square Rotary Airlock, Accomodates (8) 5.75" x 59" Long Bags (Cages included, bags NOT included), Demonstration ...more

500 cfm Young Industries, Stainless Steel Dust Collector, 75 sq.ft., 40" diameter x 6'-6" tall, cage 4.5" diameter x 48" L

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Young
Used Young Industries Stainless Steel Dust Collector, 75 SQ FT, 500 CFM, Size: VC48-16-40. The collector is 40" with a 6'-6" tall straight cylinder with side access panel for filter access. Bolt-on top cover and bottom hopper. 75 sq ft capacity. 500 cfm. 16 Stainless Steel Cages: 4.5" X 48" Long. ...more

500 cfm Filter Receiver Dust Collector, 244 sq.ft., 57" filter length, 10" air i/o

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
500 CFM Used 244 Square Foot Filter Receiver Dust Collector, 244 Sq Ft, Bottom load filters. Designed for (6) filter elements. Maximum filter length would be 57". (No filters included). With mounted solenoid enclosure, timer enclosure with photohelic gauge, and Siemens fused disconnect safety switch. 10" ...more

600 cfm Camfill Farr Gold #GS2, Stainless Steel dust collector, 650 sq.ft.

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Camfill
Model: GS2
Used 600 CFM Stainless Steel Camfil Farr Gold Series Dust Collector - GS2, Stainless steel, insulated modular housing, space-saving design, Dust-laiden process air inlet plenum with 24" square duct opening, Clean air plenum with compressed air header and solenoid valves, Top-installed 2HP centrifugal fan ...more

1200 scfm @ 7.3" HG, Spencer Turbine #30207C1, industrial vacuum, 50 HP, 4BOH multistage 30207C1 & bag separator

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Model: 30207C1
Used 50HP Spencer Industrial Vacuum 4BOH Multistage 30207C1 & Bag Separator, Serial No. 315612., Vacuum Producer: Four bearing overhung design, with flow damper & outlet silencer, Volume: 1,200 SCFM @ 7.3" HG vacuum (70 F Inlet Temperature), Line Connections: 8" sleeve, Bag Separator: 36" manual ...more

1300 cfm Camcorp, Pulsejet Dust Collector Filter Receiver, 180 sq.ft., bags 6' long, 6" air inlet, 8" air outet

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Camcorp
1300 CFM Used Camcorp Pulsejet Dust Collector Filter Receiver, 180 Sq. Ft., (21) bags and cages. (bags are about 6' long) two 6" dirty air inlets. 8" clean air outlet. 18"x40" flanged material outlet. 47" of clearance below hopper. 20"DIA.access door in hopper. 48" housing. Overall ...more

2000 cfm Donaldson #UMA 150, shaker dust collector, 5 HP fan, 150 sq.ft., Unimaster Control

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Donaldson
Model: UMA
Used Donaldson Torit Unimaster Shaker Dust Collector w/ 5HP Fan Model UMA150, Houses a single bag filter with a total cloth area of 150 sq/ft., Collector fan provides a nominal airflow range of 450-2000CFM., Hopper base with quick-release, 23 gallon dust can., Compact design with a base footprint of 31" X ...more

2200 cfm Smoot Co., Filter Receiver Dust Collector, Carbon Steel, 310 sq.ft., 6" air inlet, 8" air outlet, 115" straight side

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Smoot Co.
2200 CFM Used Smoot Filter Receiver Dust Collector, 310 Sq Ft, Pulse jet dust collector. Hopper contains level probe, Houston Piston vibrator, & aerators. 8" dia. Clean air outlet. 6" dia. Dirty air inlet. Carbon steel construction. 115" straight side. 48" diameter x 12'-6" overall height. ...more

2800 cfm Mikro #Pulsaire Hosokawa, fabric filter dust collector, 405 sq.ft., #13764

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Mikro
Model: PULSAIRE
Used 2,800 CFM Mikro Pulsaire Hosokawa Fabric Filter Dust Collector 405 sq ft, Housing: 54", constructed of mild steel with bolted top plenum and bottom hopper., Collector houses a quantity of bottom loaded, 43 filter bags and cages with a 72" length., Carbon steel circular housing is 54", having an ...more

2800 cfm Donaldson Torit Dowflo-II #DFT2-4, pulse-jet dust collector, 760 sq.ft., 5 HP fan

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Donaldson
Model: DFT2-4
Used Donaldson Torit Dowflo II Pulse-jet Dust Collector w/ 5HP Fan - DFT2-4, Houses a quantity of 4, Ultra-Web pleated cartridge filters with a total area of 760 sq/ft., 5HP external centrifugal fan (3,450RPM) provides a nominal airflow range of 500-3,150CFM., 60 hopper base with 7" solids discharge sleeve. ...more

6000 cfm Stainless Steel Pulse jet bag dust collector, 838 sq.ft.

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Used 6,000 CFM Stainless Steel Pulse Jet Bag Dust Collector (838 sq. ft), Stainless steel product contact with carbon steel top cover., Housing wall is 0.126" thick, measuring 64" square with a 60 bottom hopper & bag screen., Tandem 21" X 45" hinged door front side bag access., Contains a quantity ...more

6600 cfm, Conair Franklin, energy smart dust collector, high-temp dryer

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Used Conair Energy Smart Dust Collector Dryer Filter High-Temperature ESDC, Mild steel construction with 1" thick insulation throughout the housing, Bottom hopper with 6" manual swing gate, Inlet/Outlet: 12" flanged 90 elbows (rotatable), Houses two- 22" dia. X 24 3/4"long high-temperature pleated ...more

10000 cfm Ceco Flex-Kleen Corp. #30PRBH96M80II IG, dust collector w/ hopper, 2586 sq.ft.

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Ceco
Model: 30PRBH96M80II
Used 10,000 CFM CECO Flex-Kleen Dust Collector w/Hopper - PR Series, Constructed of A36 steel with white enamel exterior finish., Designed for 50PCF dust density with full hopper height accumulation., Housing measures 8' X 5'-4" X 11'-3" total height., Housing contains a quantity of 80 ...more

855 sq.ft., Camcorp, Cartridge Filter Dust Collector, 48" diameter x 96" tall, 21 cartridge filters, 6" inlet, 8" outlet, 154" OH

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Camcorp
Used Camcorp Cartridge Filter Dust Collector - 855 Sq. Ft., All mild carbon steel construction. The filter chamber is 48" diameter X 96" tall. Holds 21 pleated cartridge filters, side-mounted filter access panel, and air header. Tandem 6" inlets installed with pneumatic butterfly valves for static pressure ...more

Aicentric Industrial Vacuum Filter Dust Collector, 25 HP, 6" air inlet on filter receiver, 3525 RPM

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Aicentric
Used 25HP Aicentric Industrial Vacuum Filter Dust Collector, 6"DIA.dirty air inlet on filter receiver. 3525rpm direct drive.

Ancaster Conveying Systems LTD., Cyclonic Filter Receiver Dust Collector, 48" diameter x 127" tall, 4" air in, 8" air out

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Ancaster Conveying Systems Ltd.
Used Ancaster Conveying Cyclonic Filter Receiver Dust Collector, All mild steel construction with bolted top plenum and bottom hopper, 48" diameter X 127" tall, Quantity of 14 cartridge filters with a 4' length, 4" tangential sleeve dirty air inlet, 8" clean air outlet sleeve, 12" solids outlet ...more

Champion Products, Inc., Cylclone Separator Collector L.H., 52" diameter, 13.25" bottom solids outlet, 30" separated gas outlet

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Champion Products
Used 52" diameter Cylclone Separator Collector L.H., All mild steel construction, welded 14Ga. sheet, Airflow entry is clockwise direction - left-hand entry, 14" square flange connection, 52" diameter cyclone body with removable 70 conical section with vortex break, Cone section detaches from body with a ...more

Denray Dust Booths #85120, cartrige dust collector, 7.5 HP, 230/460 V., 3-phase, #16635

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Denray
Model: 85120
Used Denray Cartridge Filter Unit Dust Collector - Model: 85120, Denray cartridge dust collector cabinet with some of the side plenum assembly., Does not include frame or panels for the booth., Model No: 85120, Serial No: 472020, 7.5HP Motor: 230/460 Volt, 3 Phase, 24" Reinforced Fan Wheel, Filter Cartridge No: ...more

Lamson, vacuum system, 10 HP, 230/460 V., #03415

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Lamson
Model: 03415
10 Horsepower Used Lamson Vacuum System, Bag separator-serial #52970, model #30X96SEC, cyclone-serial #52970, model #30X72PRI, blower-serial #860182, model #3105-4-1-5075-AB, 230/460 volt, 3400 rpm. Includes auto vacuum relief valve.

Lamson Cyclone and Bag House

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Lamson
Used Lamson Cyclone And Bag House, *parts for an industrial vacuum (no vacuum producer included).

Mac Brabender, Stainless Steel cyclone bin, 36" diameter, 24" activator live bottom, #16072

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Mac
Model: 16072
Used 13 Cu. Ft. MAC Brabender Stainless Cyclone Bin w/ 24" activator live bottom, MAC Stainless Steel Cyclone with Brabender Bin Activator, 5" Flanged Clean Air Outlet, 4" Inlet, 8" Product Outlet on Bin Activator, Overall Dimensions: 36" x 70" H, Demonstration video on file., Bin will hold 13 ...more

MAC Equipment, Aluminum Filter Receiver Pulse Jet Dust Collector, 14' OH, 5" inlet, 13.5" access panel, (12) 6" diameter x 62" filter bags, Used

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Mac Equipment
Used Mac Aluminum Filter Receiver Pulse Jet Dust Collector, Overall Height: 14', 5" top side inlet, 13.5" top access panel, 13.5" bottom side access panel, 5" butterfly valve on bottom outlet, (12) 6" x 62" filter bags.

Micro Air Systems #OM3510, mist collector, 3 HP

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Micro Air Systems
Model: OM3510
Used Micro Air Systems Mist Collector Model OM3510 for oil, machining, weld fume, Serial No: 57835, Cabinet construction is 16GA welded galvanized steel, Unit was previously configured as an oil mist separator/collector for machining, Mist-laden process air enters up to three bottom inlets, Airflow is directed upwards ...more

Reimelt #1272, pulse jet filter sanitary dust collector, food grade, 50" circular filter housing, hinged side access door, #15245

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Reimelt
Model: 1272
Used Reimelt Pulse Jet-Filter Sanitary Dust Collector Model 1272, Food grade 50" circular filter housing constructed of 11GA. aluminum sheet. It holds a quantity of forty- 4.72" diameter cages to hold anti-static polyester felt bags (not included). Hinged side access door for bottom removal filter cartridges. ...more

Torit #UMA150HK3, Donaldson Torit DCE Unimaster Stainless Dust Collector, Compact Design

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Torit
Model: UMA150HK3
Used Donaldson Torit DCE Unimaster Stainless Dust Collector UMA150HK3, Overall dimensions: 135" high x 54" wide x 46" deep. Weight = 747 lbs. Demonstration video available., Unimaster Dust Collectors, Filtration Engineered for Performance, A self-contained collector with everything needed to begin ...more

Zeppelin-Reimelt #1272, Pulse jet-filter sanitary dust collector, 3.5" outside dimension, Stainless Steel hopper

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Zeppelin-Reimelt
Model: 1272
Used Reimelt Pulse Jet-Filter Sanitary Dust Collector Model 1272, Food grade 50" circular filter housing constructed of 11GA. aluminum sheet. It holds a quantity of forty- 4.72" diameter cages to hold anti-static polyester felt bags (not included). Hinged side access door for bottom removal filter cartridges. ...more

Stainless Steel Cyclone Seperator, 32" diameter

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Used 32" Diameter Stainless Steel Cyclone Seperator, Constructed of stainless steel sheet with bead-blast exterior finish (wall thickness: 0.143")., Dust-laiden Inlet: 8" flanged, Dust-laiden Outlet: 8" flanged, Filtered Air Outlet: 16" flanged, Removable clean-out panel on cone section., Assembled ...more

Stainless Steel Cyclone Seperator, 39" diameter

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Used 39" Diameter Stainless Steel Cyclone Seperator, Constructed of stainless steel sheet with bead-blast exterior finish (wall thickness: 0.143")., Dust-laiden Inlet: 10" flanged, Dust-laiden Outlet: 10" flanged, Filtered Air Outlet: 20" flanged, Removable clean-out panel on cone section. ...more