26 Results
5 scfm Shick #58AJ-16, tube-veyor corporation auto-jet dust collector, 116 sq.ft., 16 filters
Genemco | Hearne, TX
Category: Dust Collectors
Seller: Genemco
Location: Hearne, TX
Mfr: Shick
Model: 58AJ-16
Shick Tube-Veyor Corporation Auto-Jet Dust Collector. Model: 58AJ-16. S/N: FC-5566-3A. Style C. NEMA IV. 16 oz. Polyester Bag. Cloth area: 116 sq. ft. Number of bags: 16. Bag dimensions: 6 in. dia. x 70 in. H. Compressed air required is 5.8 SCFM, Construction: carbon steel. 8 in. dia bottom mixer. U.S. Electric Motor ...more
500 cfm FlexKleen, 100 sq.ft., 4' x 4', Carbon Steel housing, 25 bags, reverse pulse, (2 available) #1272193
Plantex Equipment Co | Alvin, TX
Category: Dust Collectors
Seller: Plantex Equipment Co
Location: Alvin, TX
Mfr: Flexkleen
Model: 1272193
1500 CFM Donaldson #21490, Mist Collector, 480 V., 3PH, 3 HP Motor
Aucto | San Francisco, CA
Category: Dust Collectors
Seller: Aucto
Location: El Paso, TX
Mfr: Donaldson
Model: 21490
The Donaldson Dry Flo Mist Collector, model 21490, is an industrial pneumatic filtration unit engineered for the capture of mist, smoke, and fumes. It operates on a 480 VAC, 3-phase electrical supply. This mist collector provides an airflow capacity of 1500 CFM, powered by a 3 HP motor. The unit typically incorporates ...more
1500 cfm United Air Specialists Inc. #VCC-1500, filter system, Coolant-Cat vertical bag/media dust/mist collector
Genemco | Hearne, TX
Category: Dust Collectors
Seller: Genemco
Location: Hearne, TX
Mfr: United Air Specialists
Model: VCC-1500
United Air Specialists Inc. Coolant-Cat Vertical Bag/Media Dust/Mist Collector. Model: VCC-1500 Filter System. S/N: 60038695-1098. Airflow: 1000-1500 cfm. Input power: 460 V, 1.5 amps, 60 Hz, 3 phase. Blower, type: 10-7-M, belt: A-40. Baldor Motor, 1 hp, 1425/1725 rpm, 130/380-208-230/460V, 3/1.5-3.2-3/1.5, 50/60 Hz ...more
2400 cfm Dayton #5E820B, dust collector, 7-1/2 HP, 208-230/460 V., 3510 RPM
Genemco | Hearne, TX
Category: Dust Collectors
Seller: Genemco
Location: Hearne, TX
Mfr: Dayton
Model: 5E820B
Dayton Dust Collector. Model 5E820B. Maximum flow: 2400 CFM. Drum capacity: 55 gal. Motor: 7-1/2 hp, 208-230/460 V, 3,510 rpm, Blower dimensions: 18 in. dia. x 7-1/2 in. W. Inlets: 7 in. dia. (bottom), 8-1/2 in. dia. (middle side), 7-1/2 in. dia. (top side). Cast iron Frame and body. Clearance to ground from bottom ...more
Get email updates for newly added Dust Collectors
Dust collectors (also known as dust extraction systems) are essential machines designed to capture and filter airborne particles and contaminants from industrial environments, improving air quality and protecting both equipment and personnel. These systems work by drawing in contaminated air, separating dust and particles, and releasing clean air back into the workspace or outside.
3000 acfm Camfill #APC-Series-20-General-Industrial-ARR-4V, dust collector, 10" W.G., 500 RPM, 2021
Turners Machinery Inc | Santa Paula, CA
Category: Dust Collectors
Seller: Turners Machinery Inc
Location: Dallas, TX
Mfr: Camfill
Model: APC-SERIES-20-GENERAL-INDUSTRIAL-AR
Year: 2021
CAMFIL APC SERIES 20 INDUSTRIAL ARR-4V DUST COLLECTOR, Make/Model: Camfil Series 20 Industrial ARR-4V, Year of Manufacture: 2021, Airflow Capacity: 3000 ACFM, Static Pressure: 10 in. W.G., Fan Speed: 500 RPM, Fan Power: 13.8 BHP, Noise Rating: 70 dB, Electrical: 208 VAC, 3 Phase, 60 Hz (per control panel), Filters: ...more
3400 cfm Seneca Environmental Products #49-IM-8, Reverse Jet Dust Collector, 49 Bags, 10 HP, 3450 RPM, 55 gallon Drum, 208-230/460 V., 1997
Genemco | Hearne, TX
Category: Dust Collectors
Seller: Genemco
Location: Hearne, TX
Model: 49-IM-8
Year: 1997
1997 Seneca Environmental Products, Inc. Reverse Jet Dust Collector. Model: 49-IM-8. Design volume: 3,400 cfm. Filter area: 461 sq. ft. Filter ratio: 7.37:1. Material of construction: carbon steel, all welded construction including bag cages which hold (49) 8 ft. long, 16oz. polyester felt glazed, 4-1/2 in. diameter ...more
16000 cfm, 3200 sq.ft., Pneumafil #11.5-320-8, Stainless Steel baghouse dust collector, reverse air cleaning, food svc, 40 HP Stainless Steel fan, #1272705
Plantex Equipment Co | Alvin, TX
Category: Dust Collectors
Seller: Plantex Equipment Co
Location: Alvin, TX
Mfr: Pneumafil
Model: 11.5-320-8
Year: 1996
85 sq.ft., Kice Industries #HRB 12-6, Vertical Dust Collector, (12) 4" x 69" Filters, 1/2 HP, 1995
Genemco | Hearne, TX
Category: Dust Collectors
Seller: Genemco
Location: Hearne, TX
Mfr: Kice
Model: HRB 12-6
Year: 1995
1995 Kice Industries Inc. Vertical Dust Collector. Model: HRB 12-6. Number of filters: 12. Filter dimensions: 4 in. dia. x 5 ft. 9 in. H. Total filter surface area: 85 sq. ft. Reliance Electric motor, 1/3 hp, Reliance Electric motor, 1/2 hp. Asco Tri-Point pressure operated switch and pressure transducer. Applications ...more
JUST ADDED!
100 sq.ft., Hoffman #HPC-7-84, dust collector, Stainless Steel, bags
Plantex Equipment Co | Alvin, TX
Category: Dust Collectors
Seller: Plantex Equipment Co
Location: Alvin, TX
Mfr: Hoffman
Model: HPC-7-84
JUST ADDED!
252 sq.ft., MAC #39AVRC7, Air Vent round filter receiver, (7) 39" cartridges, 28" diameter x 48" straight wall, carbon steel, 2 HP, 3450 RPM
Genemco | Hearne, TX
Category: Dust Collectors
Seller: Genemco
Location: Hearne, TX
Mfr: Mac
Model: 39AVRC7
MAC Air Vent Round Filter Receiver. Model: 39AVRC7. S/N: 23404-004-1. Style: II. Customer P.O. No: 4500045155. Inside straight-wall dimensions: 2 ft. 4 in. dia. x 4 ft. H. Carbon steel construction. Number of cartridges: 7. Cartridge length: 3 ft. 3 in. Filter media: 252 sq. ft. with an air to media ratio of 2.3:1 @ ...more
JUST ADDED!
425 sq.ft., MAC, dust collector, 304 Stainless Steel, reverse pulse, bags
Plantex Equipment Co | Alvin, TX
Category: Dust Collectors
Seller: Plantex Equipment Co
Location: Alvin, TX
Mfr: Mac
JUST ADDED!
462 sq.ft., CP Environmental #84-NF-049, dust collector, Carbon Steel, reverse pulse, bags
Plantex Equipment Co | Alvin, TX
Category: Dust Collectors
Seller: Plantex Equipment Co
Location: Alvin, TX
Mfr: Cp Environmental
Model: 84-NF-049
JUST ADDED!
2239 sq.ft., Sly #Dynaclone-A6, dust collector, Carbon Steel, reverse pulse, envelope
Plantex Equipment Co | Alvin, TX
Category: Dust Collectors
Seller: Plantex Equipment Co
Location: Alvin, TX
Mfr: Sly
Model: DYNACLONE-A6
JUST ADDED!
3400 sq.ft., dust collector, Carbon Steel, reverse pulse, bags, custom
Plantex Equipment Co | Alvin, TX
Category: Dust Collectors
Seller: Plantex Equipment Co
Location: Alvin, TX
Airfoil Impellers Corporation, Cast Aluminum Impellers and Venturi Housing
Genemco | Hearne, TX
Category: Dust Collectors
Seller: Genemco
Location: Hearne, TX
Mfr: Airfoil Impellers Corporation
Airfoil Cast Aluminum Impellers and Venturi Housing.(H9).
JUST ADDED!
Donaldson #7508201, Torit control panel, Delta P
Aucto | San Francisco, CA
Category: Dust Collectors
Seller: Aucto
Location: El Paso, TX
Mfr: Donaldson
Model: 7508201
DELTA P WITH KEYPAD LABEL PUSH-BUTTON INTERFACE PANEL MOUNT.
Dri-Air #CDC-20-ST, Cyclone Dust Collector
Meadoworks LLC | Schaumburg, IL
Category: Dust Collectors
Seller: Meadoworks LLC
Location: Royse City, TX
Mfr: Dri-Air
Model: CDC-20-ST
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Dri-Air CDC-20-ST Cyclone Dust Collector available for purchase. Cyclone-style dust collection unit suitable for plastic processing ...more
JUST ADDED!
Fumex #FA2SSD, High Efficiency Dust Collector and Fume Extractor, 120 V., 1 Ph., AS IS
Aucto | San Francisco, CA
Category: Dust Collectors
Seller: Aucto
Location: El Paso, TX
Mfr: Fumex
Model: FA2SSD
UNIT CHECKED OUT OK BACK WELLS NEED TO BE REPLACED | VOLTAGE: 120 VAC | PHASE: 1 PHASE.
JUST ADDED!
Henlex #HV205-H, dust pollutant air extractor, 4 cu. ft. hopper, 5 HP, 3485 RPM, 575 V., 3 Ph., Allen-Bradley SLC 500
Genemco | Hearne, TX
Category: Dust Collectors
Seller: Genemco
Location: Hearne, TX
Mfr: Henlex Incorporated
Model: HV205-H
Henlex Incorporated Dust Pollutant Air Extractor. Model: HV205-H. S/N: 0112-50209. Hopper capacity: 4.0 cu. ft. Hyundai Motor, 5 hp, 3485 rpm, 575 V, 60 Hz, 3 phase. Control panel with Allen Bradley SLC 500 progRam Industriesmable controller, control voltage: 115 VAC. Flo-Divert Valve with (2) Clippard Minimatic air ...more
JUST ADDED!
900 M3/Hr. OKI #MFX-2200XX, Multi-User Particle Fume Extraction System
Aucto | San Francisco, CA
Category: Dust Collectors
Seller: Aucto
Location: El Paso, TX
Mfr: Oki
Model: MFX-2200XX
SYSTEM OVERVIEW MODEL TYPE: MULTI-USER PARTICLE FUME EXTRACTION SYSTEM AIRFLOW CAPACITY: UP TO 900 M/H WITH 1,075 PA OF SUCTION FORCE CAPACITY: SUPPORTS UP TO EIGHT MANUAL ASSEMBLY WORKSTATIONS OR EXTRACTION ARMS FILTRATION: COMBINED PRE-FILTER AND HEPA FILTRATION RATED AT 99.97% EFFICIENCY AT 0.3 MICRONS | POWER: 120 ...more
JUST ADDED!
Onikaze #HVS-40, heavy smoker mist collector, 1.5 KW, 200/220 V. AC, 3 phase
Aucto | San Francisco, CA
Category: Dust Collectors
Seller: Aucto
Location: El Paso, TX
Mfr: Onikaze
Model: HVS-40
4-POLE, 3-PHASE, SF-JR TYPE, 1.5 KW, 6.6/6 AMP, 200/220 VAC, 50/60 HZ, 1420/1720 RPM, 90L FRAME, IP44 | VOLTAGE: 200/220 VAC | PHASE: 3 PHASE.
JUST ADDED!
Pace Arm-Evac #200, Fume Extractor Filter, 3" Hose Inlet and Outlet
Aucto | San Francisco, CA
Category: Dust Collectors
Seller: Aucto
Location: El Paso, TX
Mfr: Pace
Model: 200
GOOD PHYSICAL AND WORKING CONDITION. FILTER IS CLEAN. SOME SMALL SCRAPES ON THE CHASSIS. 3 INCH HOSE IN/OUT | VOLTAGE: 120 VAC | PHASE: 1 PHASE.
Unimaster #UMA40, vacuum dust Control equipment, 3/4 HP Baldor motor, 3450 RPM, 208-230/460 V., 3-phase
Genemco | Hearne, TX
Category: Dust Collectors
Seller: Genemco
Location: Hearne, TX
Mfr: Unimaster
Model: UMA40
Unimaster Vacuum Dust Control Equipment. Model: UMA40. S/N: 89-1398. Baldor Motor, 3/4 hp, 3450 rpm, 208-230/460 V, 2.7-2.6/1.3 amps, 60 Hz, 3 phase. Overall dimensions: 28 in. L x 18 in. W x 58 in. H.
JUST ADDED!
7' Ventilation Direct, Cooktop Ventilation Hood
Aucto | San Francisco, CA
Category: Dust Collectors
Seller: Aucto
Location: El Paso, TX
Mfr: Ventilation Direct
Model: 7
VENTILATION DIRECT COOKTOP VENTILATION HOOD 7 FT.
Cyclone Separator, 36" L x 10' width
Genemco | Hearne, TX
Category: Dust Collectors
Seller: Genemco
Location: Hearne, TX
Cyclone Separator, 36 in. x 10 ft.
