8 Results
Alliance Manufacturing #Aquamaster-CB-2400E, conveyor belt washer, wash/heated blow-off, 24" W x 18" H, 2010
Furnaces, Ovens & Baths, Inc | Clarkston, MI
Category: Conveyor and Pass Through Parts Washer
Seller: Furnaces, Ovens & Baths, Inc
Location: Clarkston, MI
Mfr: Alliance
Model: AQUAMASTER-CB-2400E
Year: 2010
****NOTE: NEW SS 1" x 1", 24" wide Flat Wire Belt is included*****, Module Aquamaster CB-2400E, Conveyor tunnel capacity 24" W X 18" H, Load/unload height 38.00 inches (nominal), Wash Spray zone length 6 feet, Tank capacity 365 gallons, Tank construction 12 gauge, Type 304 stainless steel, Pump brand/type Scot model ...more
High High Star Cleaning System Cleaning System #W/R/BO, Stainless Steel conveyor belt washer, 3-stage, 24" W x 10" H
Furnaces, Ovens & Baths, Inc | Clarkston, MI
Category: Conveyor and Pass Through Parts Washer
Seller: Furnaces, Ovens & Baths, Inc
Location: Clarkston, MI
Mfr: High Star Cleaning System
Model: W/R/BO
3 Stage Stainless Steel Pass Thru Parts Washer, 24" Wide Belt 1"x1" Mesh, 10" Part Height (Plenty of room inside to raise another 6" w/modification), Stages, Entrance, to 18" Vestibule, 36" Rinse, 24" Rinse, 60" Heated Blow-Off, Exit, Access Covers-both sides of tunnel to each stage., Access covers to chip baskets ...more
Hurricane #5012-Mini, feed-thru parts washer, 2-stage, 12" x 72" belt, variable speed, 2022
UPM, LLC | Ferndale, MI
Category: Conveyor and Pass Through Parts Washer
Seller: UPM, LLC
Location: Ferndale, MI
Mfr: Hurricane
Model: 5012-MINI
Year: 2022
(1) Rebuilt 12" wide 2 Stage Hurricane Thru Feed Parts Washer, Belt Width: 12", Belt Length: 72" Approx, Height Capacity: 4" approx, Electric Heat, Dual Filters, Air Blow Off, Variable Speed, Remanufactured in 2022 by Michigan Built Industrial Washers, Very little use since installation., Belt Width: 12", Belt Length: ...more
Midbrook, 24" x 10" Stainless Steel conveyor washer, wash & heated blow-off, electric
Furnaces, Ovens & Baths, Inc | Clarkston, MI
Category: Conveyor and Pass Through Parts Washer
Seller: Furnaces, Ovens & Baths, Inc
Location: Detroit, MI
Mfr: Midbrook
Item 7552 Manufacturer: Midbrook, Inc. Category: Continuous Type: Stainless Steel Belt Washer Heated: Electric Model Number: Cyclone Serial Number: 45001-600 (2012) Max. Temperature: 180 Voltage: 480/3/60 Work Area: 24"W x 10"H Opening External Dimensions: 7'W x 5'H x 12'L Controls: Attached to the side of ...more
Ransohoff #LeanVeyor, conveyor belt washer, wash/rinse/blow-off, electric, 36" W x 14" H, 2010
Furnaces, Ovens & Baths, Inc | Clarkston, MI
Category: Conveyor and Pass Through Parts Washer
Seller: Furnaces, Ovens & Baths, Inc
Location: Clarkston, MI
Mfr: Ransohoff
Model: LEANVEYOR
Year: 2010
MACHINE, CONVEYOR SPEED. Variable speed 1-10 FPM, CONSTRUCTION, TANKS.Stainless, HOUSING.Stainless, SOLUTION PIPING.Stainless- Schedule 40, FRESH WATER PIPING.Galvanized piping with brass float valve, INSULATION.1” thick, BELT.Ashworth Advantage 200 plastic mesh belt, WASH TANK, CAPACITY. 350 GAL, TEMPERATURE. ...more
Get email updates for newly added Conveyor and Pass Through Parts Washer
Conveyor and Pass-Through Parts Washers (also known as tunnel washers or inline parts washers) are machines designed for continuous cleaning of parts as they move along a conveyor. Commonly used in industries like automotive, aerospace, and manufacturing, these washers efficiently remove grease, dirt, and contaminants. They are ideal for high-volume production, ensuring consistent and thorough cleaning in automated workflows.
Ransohoff #Leanveyor, Stainless Steel conveyor belt washer, 7" W belt, electric heat, 2019
Furnaces, Ovens & Baths, Inc | Clarkston, MI
Category: Conveyor and Pass Through Parts Washer
Seller: Furnaces, Ovens & Baths, Inc
Location: Clarkston, MI
Mfr: Ransohoff
Model: LEANVEYOR
Year: 2019
7" Wide Balanced Weave Conveyor Belt, 1/4" x 1/4" Flights welded approximately every 6" on center., 2-1/8" Tunnel Height, Variable Speed 1-5 FPM, Construction:, Tanks: Stainless, Housing: Stainless, Solution Piping: Stainless, Insulation: 1" Thick, Pre-Blow-Off Fan:, 275 CFM @ 40 SP, Wash Tank:, Capacity: 193 Gallons ...more
Stoelting #Omni-Force-212, 12" x12" S/S conveyor belt washer, electric, wash, rinse, heated blow-off
Furnaces, Ovens & Baths, Inc | Clarkston, MI
Category: Conveyor and Pass Through Parts Washer
Seller: Furnaces, Ovens & Baths, Inc
Location: Detroit, MI
Mfr: Stoelting
Model: OMNI-FORCE-212
Item 7553 Manufacturer: Stoelting Category: Continuous Type: Stainless Steel Belt Washer Heated: Electric Model Number: Omni Force 212 Serial Number: 832 Max. Temperature: 150°F W/R, 250°F Blow-Off Voltage: 460/3/60 Work Area: 12"W x 12"H Opening External Dimensions: 8'W x 9'H x 17'L Controls: ...more
Walmil #W0007, continuous parts washer w/infeed & outfeed conveyor
R.A.B. Industries Inc | Washington, MI
Category: Conveyor and Pass Through Parts Washer
Seller: R.A.B. Industries Inc
Location: Washington, MI
Mfr: Walmil
Model: W0007
WALMIL COMPANY PARTS WASHER, MODEL W0007. CONTINOUS PARTS WASHER WITH IN FEED AND OUT FEED CONVEYOR.