401 - 450 of 2121 listings
Eurotech #B446-SY2 RBT2 Trofeo, CNC lathe, 20" swing, 8" chuck, 2.5" bar, 37.5" centers, Fanuc 31iB, Tri-Mist 850 G2 mist collector, 12' Edge Patriot magazine barfeeder, 2020
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Eurotech
Model: B446-SY2
Year: 2020
2.56” X 37.5” CNC Lathe with Fanuc 31iB Control, Tri - Mist 850 G2 Mist Collector, 12’ Edge Patriot Magazine Barfeeder, LNS Magnetic Chip Conveyor, 1000 PSI HP Dual Pump Coolant System Coolant Thru Sub-Spindle, Royal QG-65 Main Spindle Collet Chuck, Royal QG-42 Sub-Spindle Collet Chuck, 200mm Ejector ...more
JUST ADDED!
Eurotech Elite Trofeo #B465-SY2, CNC Turning Center, 8" Swing, 24.8" Centers, 35 HP, 2015
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Eurotech
Model: B465-SY2
Year: 2015
8” X 24.8” CNC Turning Center with Fanuc F1i Multi - Channel Control, 30° Slant Bed, (2) Spindles, (2) Turrets, E - Axis Clear Shift Back Spindle, 1 - Axis Simultaneous Machining + 2 Axes for CNC Controlled Gantry Parts Catcher, Disk Brakes for Both Main & Sub Spindles, Rigid Tapping, Sub - Spindle ...more
Eurotech #B465-T3-Y3-Multipla, CNC Lathe, 20" swing, 8" chuck, 2.5" bar, 37.5" centers, Fanuc 31iB, 2020
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Eurotech
Model: B465-T3-Y3-MULTIPLA
Year: 2020
Make: Eurotech, Model: B465 T3-Y3 Multipla, Year: 2020, Machine Location: Upon Request, Power: 35 hp, Control: Fanuc 31iB, Bar Capacity: 2.56″, Chuck Diameter: 8″, Distance Between Centers: 37.5″, Swing Over Diameter: 20″ Main Spindle, Main Spindle, Spindle Speed: 4,000 RPM, Spindle Nose: ...more
Eurotech #B465-T3-Y3-Multipla, 20" swing, 8" chuck, 2.5" bar, 37.5" centers, 12' barfeed, Fanuc 31iB, 2020
Scott Machinery & Supply Inc | Helena, AL
Category: CNC Lathes and Turning Centers
Seller: Scott Machinery & Supply Inc
Location: Helena, AL
Mfr: Eurotech
Model: B465-T3-Y3-MULTIPLA
Year: 2020
Fanuc 31iB CNC Control, Tri-Mist 850 G2 Mist Collector, Dual Parts Conveyor, 12 Foot Edge Patriot 551 Magazine Barfeed, LNS Magnetic Chip Conveyor in addition to Standard Chip Conveyor (2 chip conveyors included), EU-1000-2 HP Coolant System Plus 1 Single System, Royal QG-65 Main Spindle Collet Chuck, Royal QG-42 ...more
Eurotech #B465/Y2, CNC Multi-axis Lathe, 2.6" bar, 8" chuck, 20 HP, 5000 RPM, 13.4" diameter x 37.5" L max, 192 tools, Fanuc 31i-B, 2012
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Eurotech
Model: B465/Y2
Year: 2012
Make: Eurotech, Model: B465/Y2, Year: 2012, Machine Location: Upon Request, Bar Capacity: 2.625″, Chuck Size: 8″, Main Spindle Power: 20 hp, Main Spindle Speed: 5,000 rpm, Sub Spindle Speed: 5,000 rpm, Max. Turning Diameter: 13.4″, Max. Turning Length: 37.5″, X-Axis Travel: 6.7″, X2-Axis ...more
Get email updates for newly added CNC Lathes and Turning Centers
A CNC lathe machine, or CNC turning machine, is a machine tool that rotates a bar of material to precisely cut, shape, and finish materials such as metal, wood, and plastic. The main spindle rotates the material, while the cutting tool can move along multiple axes.
JUST ADDED!
Eurotech Ultima #B620-SLY, CNC Turning Center, 12.6" Swing, 25.5" Centers, 2.7" Bar, 54 HP, 4,500 RPM, 2022
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Eurotech
Model: B620-SLY
Year: 2022
12.6” X 25.5” CNC Turning Center with Eurotech - Fanuc EASY Plus Control, 15 Station Turret with Driven Tools, True Y - Axis on Solid Box Ways, ASA 5” Sub - Spindle with Ejector and Coolant Through, Chip Conveyor with 3.5 Bar Wash - Down Coolant Pump, SBS Tool Monitoring System with Combined Toool ...more
Eurotech #E-42-S, slant bed CNC lathe, Fanuc 18T, 15.7" swing, sub spindle, collet chuck
JMC Machinery Sales Inc | Shelby Township, MI
Category: CNC Lathes and Turning Centers
Seller: JMC Machinery Sales Inc
Location: Chicago, IL
Mfr: Eurotech
Model: E-42-S
Eurotech Model E-42S Slant Bed CNC Lathe With Sub Spindle Max Turning Diameter: 8.7" Max Machining Length: 14.96" Max Swing: 15.74" Bar Capacity: 1.7" Spindle Shaft Bore: 2.165" Spindle Speeds: 100- 5000 RPM Spindle Motor: 20 HP Number of Turret Stations: 12 X Axis Stroke: 6.29" Z Axis Stroke: 14.9" X Axis Rapid Feed: ...more
EuroTech #Elite-735SL, CNC turning center, 22.8" swing, 2.7" bar, 12.6" dia., 20.08" lgth, A2-6, Fanuc 18i-TB, C Axis, live tool, sub spindle, LNS Super Hydrobar bar feeder, 2003
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Eurotech
Model: ELITE-735SL
Year: 2003
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 18i-TB CNC Control, Collet Chuck On Main ...more
Eurotech #Elite-B465Y2, Quattroflex CNC Turning Center, 11-Axis, 3.8" swing, 8" chuck, 2.6" bar, 2010
Universal Automatics | Richfield, OH
Category: CNC Lathes and Turning Centers
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Eurotech
Model: ELITE-B465Y2
Year: 2010
EUROTECH Elite B465Y2 Quattroflex CNC Turning Center (used) New 2010 - 11-AXES, Gantry parts catcher, (2) Y-AXES, Full C-Axis main and sub, well tooled, Rigid tapping, chip conveyor, tool monitoring system, bar feed interface, A2-6 spindle nose, 12 station upper turret and 12 station lower turret - ALL STATIONS LIVE ...more
Eurotech #Elite-B620-SLY, Multi-axis Turning Center, 5000 RPM, 15 turret stations, Fanuc cnc, sub spindle, Chip Conv., Live Tooling, 2020
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Eurotech
Model: ELITE-B620-SLY
Year: 2020
Make: Eurotech, Model: Elite B620-SLY, Year: 2020, Machine Location: Michigan, Chuck Size: 10″, Bar Capacity: 3.15″, Max Turning Diameter: 14.7″, Max Turning Length: 25.5″, Max Spindle Speed: 5,000 RPM, Turret Stations: 15, Weight: 14,900 lbs, Fanuc CNC Control, Sub-Spindle, 15-Station Turret ...more
Eurotech #Elite-B750-Sly-Stallion, CNC turning center, 26.8"/19.7" swing, 21" chuck, 3.7"/3.9" bar, 2016
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Eurotech
Model: ELITE-B750-SLY-STALLION
Year: 2016
Machining Capacity, Bar capacity 3.7/3.9, Chuck diameter 21.7, Max length between spindle faces 30.1, Max swing over diameter 26.8/19.7, Main Spindle, Max speed 3,000 rpm, Spindle nose 8 ASA, Spindle bore 4.2/4.4, Chuck diameter 15.7, Motor power 40.2-51 HP, Max torque 590-748 lb/ft, Sub-Spindle, Max speed 4,500-5,000 ...more
Eurotech #Elite-Multiflex-E-42S, CNC lathe, 8" chuck, 1.7" bar, 5000 RPM, Fanuc 18T, 2001
Asset Exchange Corporation | Elk Grove Village, IL
Category: CNC Lathes and Turning Centers
Seller: Asset Exchange Corporation
Location: Elk Grove Village, IL
Mfr: Eurotech
Model: ELITE-MULTIFLEX-E-42S
Year: 2001
Eurotech #Elite-Quattroflex-420SLLY, CNC lathe, 20.4" swing, collet chuck, 1.7" bar, 9.44" dia., 12.6" lgth, A2-5, 12 turret, Fanuc 18i-TB, Y-Axis, twin spindle / turret, 2005
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Eurotech
Model: ELITE-QUATTROFLEX-420SLLY
Year: 2005
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 18i-TB CNC Control, Collet Chuck on Main ...more
Eurotech #Elite-Trofeo-B446-SY2, Multi-Tasking CNC Lathe 20" swing, 2" bar, 9.6" machining diameter, 2.17" bore, 2012
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Eurotech
Model: ELITE-TROFEO-B446-SY2
Year: 2012
Eurotech Elite Trofeo B446-SY2 Multi-Tasking CNC Lathe, (subject to buyer verification):, Bar capacity – 2”, Max. machining diameter – 9.6″, Max. swing over diameter – 20″, MAIN SPINDLE, Max. speed – 5000 RPM, Spindle Nose – ASA-5, Spindle Bore – 2.17″, Motor ...more
Eurotech #TA-20-YS, CNC lathe, 29.9" swing, 6" chuck, 2.6" bar, 25.5" centers, 18.11" dia., Fanuc 32iMB, tool presetter, 2021
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Eurotech
Model: TA-20-YS
Year: 2021
The Eurotech TA-20-YS CNC Lathe (2021) with Fanuc 32i-Model B Control is a high-performance multi-axis turning center designed for precision machining of complex parts. Its Y-axis and sub-spindle enable done-in-one production, combining turning, milling, drilling, and tapping in a single setup. Ideal for machining ...more
Eurotech #TA-20-YS, CNC lathe, 29.9" swing, 8" chuck, 2.6" bar, 25.5" centers, Fanuc 32iMB, Mist-Fit MF550, 2021
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Eurotech
Model: TA-20-YS
Year: 2021
Low Hours! Under Power for Inspection! Tool Holders Included!, The Eurotech TA-20-YS CNC Lathe (2021) with Fanuc 32i-Model B Control is a high-performance multi-axis turning center designed for precision machining of complex parts. Its Y-axis and sub-spindle enable done-in-one production, combining turning, milling ...more
Eurotech #TA-20YS-640, CNC multi-tasking center, 29.9" swing,collet chuck, 2.6" bar, 25.5" centers, 18.11"dia., 25.2"lgth, 12 turret, Fanuc 32ITB, 4' LNS quickload servo 3 plus barfeeder, 2022
Used CNC LLC | Huntley, IL
Category: CNC Lathes and Turning Centers
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Eurotech
Model: TA-20YS-640
Year: 2022
Swing Over Bed: 29.92", Turning Diameter: 18.11", Turning Length: 25.2", Distance Between Centers: 0, Distance Between Spindles: 24.6", Chuck Size 1, 2: Collet, Collet, Spindle Nose 1, 2: 0, Spindle Bore Diameter 1, 2: 3.2", Bar Capacity 1, 2: 2.6", Spindle Speeds 1, 2: 4000, 4500 RPM, Spindle Horsepower 1, 2: 30 ...more
Extron #1840EC, CNC lathe, 3-Axis, 18-1/8" swing, 9-1/2" swing over cross slide, 40" centers
Cleveland Machinery Sales Inc | Cleveland, OH
Category: CNC Lathes and Turning Centers
Seller: Cleveland Machinery Sales Inc
Location: Cleveland, OH
Mfr: Extron
Model: 1840EC
MACHINE S:, SWING OVER BED 18-1/8", SWING OVER CROSS-SLIDE 9-1/2", DISTANCE BETWEEN CENTER 40", CROSS SLIDE (X) TRAVEL 9-1/2", LONGITUDINAL (Z) TRAVEL 31-1/4", SPINDLE NOSE & TAPER D1-6 / #6, SPINDLE BORE DIAMETER 2-1/4", TAILSTOCK DIAMETER 2-3/8", TAILSTOCK TRAVEL & TAPER 6" / M.T.#4, SPINDLE SPEED 3 STEPS ...more
JUST ADDED!
Fadal #FG-5, CNC Lathe, 19.6" swing, 3.93" machining length, 5" chuck, 1.2" bar, 7.5 HP, 6000 RPM, 2-axis, 2014
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Fadal
Model: FG-5
Year: 2014
Multi-Axis CNC Lathe in used condition. Key : 19.6" swing, 3.93" machining length, 2 axis, 5" chuck, 1.26" bar capacity, 7.5 hp, max 6,000 RPM, 5.3" turning diameter., 2014 FADAL FG-5, Swing. 19.6", Machining Length. 3.93", # Axis. 2, Chuck Size. 5", Bar Capacity. 1.26", Power. 7.5 hp, Max RPM. 6,000 RPM, Turning Dia. ...more
Famar #Tandem-200, Automatic CNC Lathe, 5.9" max diameter, 12.5" X & 10" Z work strokes, 90 MPM X, 60 MPM Z, 2008
Aaron Equipment Co | Schaumburg, IL
Category: CNC Lathes and Turning Centers
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Famar
Model: TANDEM 200
Year: 2008
used- famar automatic cnc lathe, model tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); working strokes: x x z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm x-axis total stroke; 90m/minute high speed; 60m/minute z-axis fastest speed; 313mm x-axis motor torque, 250mm z-axis motor torque. our freight ...more
Famar #Tandem-200, Automatic CNC Lathe, 5.9" max diameter, 12.5" X & 10" Z work strokes, 90 MPM X, 60 MPM Z, 2007
Aaron Equipment Co | Schaumburg, IL
Category: CNC Lathes and Turning Centers
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Famar
Model: TANDEM 200
Year: 2007
used- famar automatic cnc lathe, model tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); working strokes: x x z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm x-axis total stroke; 90m/minute high speed; 60m/minute z-axis fastest speed; 313mm x-axis motor torque, 250mm z-axis motor torque. our freight ...more
Famar #Tandem-200, Automatic CNC Lathe, 5.9" max diameter, 12.5" X & 10" Z work strokes, 90 MPM X, 60 MPM Z, 2007
Aaron Equipment Co | Schaumburg, IL
Category: CNC Lathes and Turning Centers
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Famar
Model: TANDEM 200
Year: 2007
used- famar automatic cnc lathe, model tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); working strokes: x x z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm x-axis total stroke; 90m/minute high speed; 60m/minute z-axis fastest speed; 313mm x-axis motor torque, 250mm z-axis motor torque. our freight ...more
Fat #Tur-630MN, CNC lathe, Siemens 810D, 25" swing, 14.6" swing over cross slide, (2) cooling tanks, 2007
Liberty Machine Works | Preston, ID
Category: CNC Lathes and Turning Centers
Seller: Liberty Machine Works
Location: Preston, ID
Mfr: Fat
Model: TUR-630MN
Year: 2007
Can be seen under power. This lathe is super clean and comes a 4 jaw chuck, Dorian tool post with several holders and Siemens 810D. It has very low hours, (around 2,000) has been well-maintained., Located at our warehouse in Preston, Idaho, We care about the machines we sell and want all of them to enjoy continued ...more
Fat Fat Haco #TUR-630MN-120, Toolmex CNC lathe, Siemnens Sinumerik 510 Manual Plus Control, 24.8" swing, 120" centers, 2001
Equipment Hub | Decatur, GA
Category: CNC Lathes and Turning Centers
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Fat Haco
Model: TUR-630MN-120
Year: 2001
Stock #: 181260001, Location: Norfolk, NY, Brand: FAT HACO, Model: TUR-630MN-120, Year: 2001, Approx. Shipping Weight: Weight: 2,000 lbs, Approx. Shipping Dimensions: L: 193", W: 85", H: 70", Loading Fee: Rigging Required, Swing Over Bed: 24.8" (630 mm), Swing Over Cross Slide: 14.5-14.6" (370 mm) ...more
JUST ADDED!
Feeler #DMC-DL-22LA, CNC Lathe, 21.7" Swing, 19.3" Centers, 10" Chuck, 2.6" Bar, 11" Turning diameter, 4000 RPM, 12-Station Turret, 2022
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Feeler
Model: DMC DL 22LA
Year: 2022
Used CNC Lathe with Fanuc 0ITF control. s a 10" chuck, 2.55" bar capacity, 21.65" swing, 11.02" turning diameter, 4,000 RPM spindle speed, and 19.29" distance between centers. Includes tailstock and chip conveyor., Chuck Size 10", Bar Capacity 2.55", Swing 21.65", Turning Diameter 11.02", Spindle Speed 4,000 RPM ...more
JUST ADDED!
Feeler #FT-250, CNC Lathe, 25" Swing, 42.5" Machining length, 10" Chuck, 16.5" Turning diameter, 30 HP, 4000 RPM, 2011
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Feeler
Model: FT-250
Year: 2011
2011 FEELER FT-250, Swing. 635 mm, Machining Length. 1,080 mm, Chuck Size. 10", Power. 30 hp, Max RPM. 4,000 RPM, Turning Dia. 420 mm, Control. CNC (Fanuc), FANUC OI-TD CNC CONTROL, 30 HP CNC LATHE, TAILSTOCK, RS232 INTERFACE, MANUAL PULSE GENERATOR, LIFT UP TYPE CHIP CONVEYOR, TOOL SETTER MOUNTED ON MACHINE, HAS SOME ...more
JUST ADDED!
Feeler #FT-250, CNC Lathe, 2-Axis, 25" Swing, 42.5" Machining length, 16.5" Turning diameter, 4000 RPM, 2011
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Feeler
Model: FT-250
Year: 2011
Used CNC Lathe available. s include a 635 mm swing, 1,080 mm machining length, 2 axes, 4,000 RPM max, and 420 mm turning diameter., 2011 FEELER FT-250, Swing. 635 mm, Machining Length. 1,080 mm, # Axis. 2, Max RPM. 4,000 RPM, Turning Dia. 420 mm, Control. CNC (Fanuc).
JUST ADDED!
Feeler #FTC-150, CNC Lathe, 2-Axis, 21.7" Swing, 12.2" Machining length, 6" Chuck, 2" Bar, 11.8" Turning diameter, 15 HP, 6000 RPM, 2014
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Feeler
Model: FTC-150
Year: 2014
CNC Lathe, used, boasts a 21.7" swing, 12.2" machining length, 2-axis, 6" chuck, 2" bar capacity, 15 hp, up to 6,000 RPM, 11.8" turning diameter. Comes with hydraulic tailstock, chip conveyor, and coolant system., 2014 FEELER FTC-150, Swing. 21.7", Machining Length. 12.2", # Axis. 2, Chuck Size. 6", Bar Capacity. 2" ...more
Femco #HL-25, CNC Lathe, 12 tool, tailstock, Fanuc Oi-TC, Chip Conv., 2006
HGR24 | Euclid, OH
Category: CNC Lathes and Turning Centers
Seller: HGR24
Location: Euclid, OH
Mfr: Femco
Model: HL-25
Year: 2006
Inventory No. 1225-102-0005 Manufacturer Femco Model No. HL-25 Name CNC Lathe Arrival Date 02-20-2026 Dimensions L x W x H (inches) 60 x 125 x 71 Electrical 50/60/220/380 Weight (lb.) 6890 Category CNC Condition Used Available Quantity 1 Serial No. L16-5245 Make Year 2006 Item 12 Position Tool Chamber, Tailstock ...more
Femco #HL-55NT, CNC turning center, Fanuc 0iTF, 28.6" swing, 15" chuck, 4.5" bar, 2020
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Femco
Model: HL-55NT
Year: 2020
2020 FEMCO HL-55 NT, Swing. 28.62", Machining Length. 13.39", Max. Turning Diameter. 24.21", Chuck Size. 15", Bar Capacity. 4.53", Power. 35 hp, Max RPM. 2,500 RPM, Turret Stations. 12, Tailstock. No, Cut Hours. 228 hr., Fanuc Series Oi-TF CNC Control, Chip Conveyor.
Femco #HL-55S, CNC lathe, 28" swing, 15" chuck, 3-jaw, 4.6" bar, 25" dia., 42" lgth, A2-11, 12 turret, Fanuc Oi-T, tailstock, chip conveyor, 2008
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Femco
Model: HL-55S
Year: 2008
Femco HL55S CNC Lathe - 2008, 28" Swing, 25" Diameter, 42" Length, 15" Chuck, Fanuc Ctrl, Tailstock, Chip Conveyor, Femco HL55S CNC Lathe, New: 2008, Swing over Bed: 28", Max Turning Diameter: 25", Max Turning Length: 42.12", Bar Capacity: 4.6", Spindle Bore: 5.2", Spindle Nose: A2-11, Spindle Motor: 35/30HP, Spindle ...more
Femco #HL-55S, CNC lathe, 28.6" swing, 15" chuck, 4.5" bar, 46" machining length, 24.4" turn diameter, 2008
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Femco
Model: HL-55S
Year: 2014
2014 FEMCO HL-55S, Swing. 28.6", Machining Length. 46", Max. Turning Diameter. 24.4", Chuck Size. 15", Bar Capacity. 4.5", Power. 35 hp, Max RPM. 2,500 RPM, Tailstock. Yes, Control. CNC (Fanuc 0i-TC).
Femco #HL-55S, 2-Axis CNC Lathe, 28.6" swing, 24.4" turning diameter, 46" machining length, 15" chuck, 4.5" bar, 35 HP, 2500 RPM, Fanuc OTC, tailstock, chip conveyor, 2001
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Femco
Model: HL-55S
Year: 2001
For sale: 2001 FEMCO HL-55S CNC Lathe. s include a 28.6" swing, 46" machining length, 15" chuck, and 2 axes, powered by 35 hp. Fanuc OTC control, chip conveyor, tailstock, and tool holders., 2001 FEMCO HL-55S, Swing. 28.6", Machining Length. 46", # Axis. 2, Chuck Size. 15", Bar Capacity. 4.5", Power. 35 hp, Max RPM. ...more
Fortune #VTurn-36, 2-Axis CNC Lathe, 25.5" swing, 35" machining length, 21.6" turning diameter, 12" chuck, 35 HP, 2500 RPM, tailstock
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Fortune
Model: VTURN-36
Fortune VTURN-36 CNC Lathe, used but reliable, s a 25.5" swing, 35" machining length, and 35 hp power. With a 12" chuck, 2,500 RPM max, and 21.6" turning diameter, it includes a tailstock but no live tooling or sub spindle; HRC 55 equipped., FORTUNE VTURN-36, Swing. 25.5", Machining Length. 35", # Axis. 2, Chuck Size. ...more
Fortune #VTurn-26x60, CNC lathe, 1995
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Fortune
Model: VTURN-26X60
Year: 1995
Manufacturer FortuneModel Fortune VTurn-26 x 60 CNC LatheYear 1995Condition UsedStock Number 4780426.
Fortune #VTurn-26x60, CNC lathe, 1995
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Fortune
Model: VTURN-26X60
Year: 1995
Manufacturer FortuneModel Fortune VTurn-26 x 60 CNC LatheYear 1995Condition UsedStock Number 4780426.
JUST ADDED!
Fryer #ET-30, CNC Lathe, 2-Axis, 30" Swing, 80" Machining length, 20" Chuck, 4.1" Bar, 15" Turning diameter, 30 HP, 1500 RPM, 8-Station Turret
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Fryer
Model: ET-30
Used CNC Lathe available, featuring a 20 chuck, 4.1 bar capacity, 2 axis, and a 30 HP motor. With a 15 turning diameter, 30 swing, and 80 machining length, it's the TOUCH 2000 CNC control and an 8-station automatic turret., Chuck Size: 20, Bar Capacity: 4.1, # Axis: 2, Power: 30 HP, Max RPM: 1,500 RPM, Turning ...more
Fryer #ET-30, CNC Flat Bed Lathe, 20" chuck, 4.1" bar, 2 axis, 30 HP, 1500 RPM, 15" diameter x 80" L max, 30" swing, tailstock, Touch2000, 8 station
Wheeler Machinery Sales | Pomona, CA
Category: CNC Lathes and Turning Centers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Fryer
Model: ET-30
FRYER ET-30 CNC Flat Bed Lathe #8103 #2, Chuck Size: 20, Bar Capacity: 4.1, # Axis: 2, Power: 30 HP, Max RPM: 1,500 RPM, Turning Diameter: 15, Swing: 30, Machining Length: 80, Tailstock: Yes, Weight: 15,000 lbs, Control CNC: (TOUCH 2000), FRYER TOUCH 2000 CNC CONTROL, 30HP SPINDLE MOTOR 3-SPEED GEARED HEADSTOCK ...more
Fryer #Easy-Turn-ET Series, CNC turning center, 16" chuck, 2100 Control, 2012
Used Solutions Inc | Algonquin, IL
Category: CNC Lathes and Turning Centers
Seller: Used Solutions Inc
Location: Algonquin, IL
Mfr: Fryer
Model: EASY-TURN-ET
Year: 2012
JUST ADDED!
Fryer #EasyTurn, CNC/Manual Toolroom Lathe
Mud Technology | Athens, TX
Category: CNC Lathes and Turning Centers
Seller: Mud Technology
Location: Athens, TX
Mfr: Fryer
Model: EASYTURN
Fryer Easy Turn combination manual and cnc toolroom lathe. s a flatbed design with a mechanical handwheels for manual operation, along with an integrated CNC controller panel. Intact machine not verified to run electronically. Buyer is responsible for all loading/rigging/transporting of equipment. Easily accessible ...more
Fryer #SL10, CNC slant bed turning center, 10" chuck, 3-jaw, 3" hole, 32" centers, 20" dia., 28" lgth, A2-8, 12 turret, 25-4200 RPM, 40 HP, Fryer Touch 21 Control
Greenway & Associates Ltd | Orange City, IA
Category: CNC Lathes and Turning Centers
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Fryer
Model: SL10
, Remote handwheel AC digital brushless servos, Parts catcher Fryer Touch 21 control (Siemens), Hydraulic 3 jaw chuck Coolant, 5 MT live center.
Fuji #ANS-320, single spindle twin turret horizontal CNC lathe, Fanuc 320i, gantry ldr
R.A.B. Industries Inc | Washington, MI
Category: CNC Lathes and Turning Centers
Seller: R.A.B. Industries Inc
Location: Washington, MI
Mfr: Fuji
Model: ANS-320
FUJI ANS320 SINGLE SPINDLE TWIN TURRET HORIZONTAL CNC LATHE, GANTRY LOADER AND STACKER UNIT, FANUC SERIS 320I MODEL A CNC CONTROL WITH COLOR GRAPHICS, MARPOSS MODEL P7ME IN PROCESS GAUGING SYSTEM.
Fuji #ANS-320TTS, twin spindle CNC lathe, Fanuc 320i-A, automatic parts loader, 2008
R.A.B. Industries Inc | Washington, MI
Category: CNC Lathes and Turning Centers
Seller: R.A.B. Industries Inc
Location: Washington, MI
Mfr: Fuji
Model: ANS-320TTS
Year: 2008
1-USED FUJI ANS-320TTS CNC TWIN TURRET CNC TURNING CENTER W/ TAILSTOCK.
Fuji #ANS-3400, single spindle twin turret CNC lathe, Fanuc 0iT-TD, tailstock, gantry ldr
R.A.B. Industries Inc | Washington, MI
Category: CNC Lathes and Turning Centers
Seller: R.A.B. Industries Inc
Location: Washington, MI
Mfr: Fuji
Model: ANS-3400
Year: 2014
SURPLUS TO ONGOING OPERATIONS.
JUST ADDED!
Fuji #ANW-35, twin spindle CNC lathe, Fanuc 0iTD, 10" swing, Fuji BC-20 robot, dual 8 pos turrets, 2013
Perfection Global | Elk Grove Village, IL
Category: CNC Lathes and Turning Centers
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Fuji
Model: ANW-35
Year: 2013
Max. Swing: 10"Max. Turning Diameter: 10"Max. Turning Length: 4.3"Chuck: (2) 8" 3-JawX-Axis Travel: 8.9"Z-Axis Travel: 15.9"Travel Speeds (X & Z): 787 IPMNumber of Spindles: 2 OpposedSpindle Nose: A2-6Spindle Bore: 2.2"Spindle Speed: 30-3500 RPMSpindle Motor: 25 HPEach Robot's Capacity: 22 LbsMax. Loader ...more
JUST ADDED!
Fuji #ANW-41, twin spindle CNC lathe, Fanuc 0iTD, 18" swing, Fuji BC-20 robot, dual 12 pos turrets, 2014
Perfection Global | Elk Grove Village, IL
Category: CNC Lathes and Turning Centers
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Fuji
Model: ANW-41
Year: 2014
Max. Swing: 12"Max. Turning Diameter: 12"Max. Turning Length: 4.7"Chuck: 12" 3-JawX-Axis Travel: 10.4"Z-Axis Travel: 17.9Travel Speeds (X & Z): 787 IPMNumber of Spindles: 2 OpposedSpindle Nose: A2-8Spindle Bore: 2.6"Spindle Speed: 30-3000 RPMSpindle Motor: 30 HPEach Robot's Capacity: 22 lbsMax. Loader Carousel ...more
Fuji #FS-4, Cnc Lathe, w/ robot loader, 4000 RPM, 10/15 HP, 8" chuck, Fanuc 21I-TB cnc, 11.8" stroke, 2005
Aucto | San Francisco, CA
Category: CNC Lathes and Turning Centers
Seller: Aucto
Location: Kitchener, ON
Mfr: Fuji
Model: FS-4
Year: 2005
THE FUJI FS4/FS4-3100 CNC LATHE IS A COMPACT, HIGH-PRODUCTIVITY NC SINGLE-PURPOSE MACHINE DESIGNED FOR MASS PRODUCTION OF RING-SHAPED WORKPIECES. THIS GANG-STYLE CNC LATHE S A HIGH-POWER SPINDLE MOTOR, GANG-TOOL TOOLING TO REDUCE NON-CUTTING TIME AND INCREASE RIGIDITY, AND A HIGH-SPEED L35-08H ROBOT LOADER WHICH ...more
Fuji #HM-30T1, single spindle, 21i-M, 16.5" turn, 5000 RPM, 10 HP, chip conveyor, coolant, 2003, #102883
R.A.B. Industries Inc | Washington, MI
Category: CNC Lathes and Turning Centers
Seller: R.A.B. Industries Inc
Location: Washington, MI
Mfr: Fuji
Model: HM-30T1
Year: 2003
1-USED FUJI HM-30T1 SINGLE SPINDLE CNC LATHE WITH GANRY LOAD/UNLOAD AND MILLING.
Fuji #TNW-35TR, 3-Axis twin spindle live tool lathe w/gantry loader, 7" chuck, Fanuc 310i-A, 2007
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Fuji
Model: TNW-35TR
Year: 2007
Make: Fuji, Model: TNW-35TR, Year: 2007, Machine Location: Texas, Axes: 6, Chuck Size (x2): 7.9″ (20mm), Turret (x2): 10 Positions, Turret (1/2) X-Axis Travel: 10.6″ (270mm), Turret (1/2) Z-Axis Travel: 11.0″ (280mm), Turning Diameter: 7.09″ (180mm), Turning Length: 9.8″ (250mm), Spindle ...more
Fuji #TNW3500TR, twin spindle twin turret CNC lathe w/gantry load, 8" chuck, 2.2" bore, 2008
R.A.B. Industries Inc | Washington, MI
Category: CNC Lathes and Turning Centers
Seller: R.A.B. Industries Inc
Location: Washington, MI
Mfr: Fuji
Model: TNW3500TR
Year: 2008
