40 Results
Biesse #Cosmo, Semi-Automatic Case Clamp, 11.8"-51" working H, 11.8"-98" working L, 5.5"-27.5" depth, 13 FPM, 575 V., 60 Hz, 3-Ph., 2022
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: COSMO
Year: 2022
BIESSE - COSMO: Case Clamp (Semi-Automatic) -- Working Height: 11.8" - 51" (300 - 1300 mm); working length: 11.8" - 98" (300 - 2,500 mm); working depth: 5-1/2" - 27-1/2" (140 - 700 mm); 20" (500 mm) working height off floor.Motorized horizontal & vertical beams move simultaneously or individually at 13 FPM (4 ...more
Biesse #Cosmo, Case Clamp, 51" x 98" x 27-1/2" max, 13" FPM, 2022
Carolina Machinery Sales | Monroe, NC
Category: Clamp - Case & Feed Thru
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: COSMO
Year: 2022
Working Height: 11.8" - 51" (300 - 1300 mm); working length: 11.8" - 98" (300 - 2,500 mm); working depth: 5-1/2" - 27-1/2" (140 - 700 mm); 20" (500 mm) working height off floor., Motorized horizontal & vertical beams move simultaneously or individually at 13 FPM (4 MPM)., Clamping, Vertical & horizontal ...more
JUST ADDED!
Biesse Comil #Performer-TP, Case Clamp, 6.5-7.5 bar, 460 Volt, 3PH, 2008
Brighton Woodworking Machinery | Uxbridge, ON
Category: Clamp - Case & Feed Thru
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Biesse
Model: PERFORMER-TP
Year: 2008
2008 Biesse Comil Performer TP used feed through case clampFor pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click <[LEASE](https://www.brightonmachines.com/pages/lease)> for leasing informationClick ...more
Casolin #ST-SA, door entry clamp, 6' x 12' opening
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Casolin
Model: ST-SA
CASOLIN ST SA Entry Door Clamp: -- 6' x 12' Opening. -- Hydraulically operated.
Comil #Cosmo, semi-auto case clamp, 51" H x 96" L x 30" D, 1986
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Comil
Model: COSMO
Year: 1986
COMIL - COSMO/2: Case Clamp (Semi-Automatic) -- Working height: 11.8" - 51" (300 - 1,300 mm); Working length: 11.8" - 96" (300 - 2,438 mm); working depth: 5-1/2" - 30" (140 - 762 mm); 20" (500 mm) working height off floor.Motorized horizontal & vertical beams move simultaneously or individually at 13 FPM (4 MPM). ...more
Get email updates for newly added Clamp - Case & Feed Thru
Clamp - Case & Feed Thru machines are designed to securely hold and process wood panels or cases during assembly, ideal for cabinetry and furniture production. They include models with automatic feed-through systems, pneumatic clamping, and adjustable settings for various panel sizes.
Comil #Cosmo-2, Case Clamp, 230 V., 3ph, 3.7 KW, 2002
RT Machine | Hughesville, PA
Category: Clamp - Case & Feed Thru
Seller: RT Machine
Location: Hughesville, PA
Mfr: Comil
Model: COSMO-2
Year: 2002
Comil Model Cosmo 2 Case Clamp, Max. Material Size: 96" W x 52" H x 30" D, Power: 3.7 KW, 230 Volt, 3-Phase, Push-Button Controls, Serial #: 187/85.
Comil #Xpress, CNC automatic feed through case clamp, 29.92" W x 98.43" L x 51.18" H capacity, 114 FPM, NC 400 CNC Control, 1999
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Comil
Model: XPRESS
Year: 1999
COMIL - XPRESS: Case Clamp (Automatic Feed Through) -- Working width: 180 - 760 mm (7.09" - 29.92"). -- Working length: 250 - 2,500 mm (9.84" - 98.43"). -- Working height: 250 - 1,300 mm (9.84" - 51.18"). -- Working table height: 500 mm (19.69"). -- Conveyor speed: 35 MPM (114 FPM). -- Beam speed: 18 MPM (59 FPM); ...more
Gannomat #260, semi-auto case clamp, 100" x 50" x 26" clamp capacity
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Gannomat
Model: 260
GANNOMAT - 260: Case Clamp (Semi-Automatic): -- 100" x 50" x 26" Clamping Cap.; (3) vertical combination air cylinders & shoes mounted on horizontal beam for top pressure; 0.33 HP motor for up/down travel. -- (2) Combination air cylinders & shoes mounted on adjustable vertical, side pressure beam.Vertical beam ...more
Gannomat #260, Case Clamp
iBid Machinery | Roswell, GA
Category: Clamp - Case & Feed Thru
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Gannomat
Model: 260
Product :, Machine Location State:, Machine Location City:, Year:, Make:, Model:, Serial No:, Phase/Voltage:, Condition:, Any Known Issues: no, In Production: no -stored inside -, Product Type:, Access to Forklift for Loading:, Loading Fee:, Shipping Dimensions:, Shipping Weight:, Shipping Brackets Available.
JUST ADDED!
Gannomat #Concept-70-EASY-170, Case Clamp, 51-3/16" x 66-59/64" x 27-35/64"
Carolina Machinery Sales | Monroe, NC
Category: Clamp - Case & Feed Thru
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Gannomat
Model: CONCEPT-70-EASY-170
- Sturdy stress-free steel frame construction, - Steel bar side pressure beam construction with solid platen surface, - Continuous left-side counter pressure surface and solid floor, - Motorized adjustment of the pressure beam by precision trapezoidal-threaded spindles (for optimal lead and concentric accuracy), heavy ...more
Gannomat #Concept-70-Eco, semi-auto case clamp, 98.4" length, 51" height, 24.5" depth, 2019
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Gannomat
Model: CONCEPT-70-ECO
Year: 2019
GANNOMAT - CONCEPT 70 ECO: Case Clamp (Semi-Automatic) + GANNOMAT INJECTA Glue Gun/Application Device -- Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams specially designed to save time & labor. -- Clamping pressure is applied across the entire vertical & horizontal beams for ...more
Gannomat #Concept-70-Eco, semi-auto case clamp, 2023
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Gannomat
Model: CONCEPT-70-ECO
Year: 2023
GANNOMAT - CONCEPT 70 ECO PLUS: Case Clamp (Semi-Automatic): -- Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams specially designed to save time & labor. -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- ...more
Gannomat #Concept-70-Eco-Plus, Interlocking Lamellar Case clamp, 220 V., 3ph, 2023
iBid Machinery | Roswell, GA
Category: Clamp - Case & Feed Thru
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Gannomat
Model: CONCEPT-70-ECO-PLUS
Year: 2023
Product : 2023 CONCEPT 70 ECO PLUS INTERLOCKING LAMELLAR CASE CLAMP - Tennessee, Machine Location State: Tennessee, Machine Location City: Cookeville, Year: 2023, Make: Gannomat, Model: Concept 70 ECO Plus Interlocking Lamellar, Serial No: 1220.348, Phase/Voltage: 220V 3PH See plate in photos, Condition: Excellent ...more
Holz-Her #1516, single bay case clamp, 100" x 50" x 24"
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holz-Her
Model: 1516
HOLZ-HER - 1516 Case Clamp (Single-Bay) -- 1-Bay Clamp; 100" x 50" x 24" clamping cap.; (1) movable, vertically positioned clamping beam with: (3) Horizontal clamps; (4) adjustable vertical clamps. -- Total of (14) pressure cylinders with: 3-7/8" Stroke & (4) adjustable counter pressure bars; 700 Lbs/cylinder ...more
Homag #CABTEQ-S-250, Semi-Automatic Case Clamp, 98-3/8" L x 35-3/8" D x 55-1/8" H Case capacity, (2) sets of steel pressure beams, 2022
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Homag
Model: CABTEQ-S-250
Year: 2022
HOMAG - CABTEQ S-250: Case Clap (Semiautomatic)The CABTEQ S-250 is: Manually operated Case Clamp; due to the machines unique design, setup for different size cases is virtually eliminated.The S-250 incorporates: (2) Sets of steel pressure beams: (1) Set horizontal; (1) vertical. As a result of their alternating ...more
JUST ADDED!
Homag #Cabteq-S-250, case clamp, 12-18 Kn vertical & horizontal press capacity, low hours, 2025
Equipment Hub | Stone Mountain, GA
Category: Clamp - Case & Feed Thru
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Homag
Model: CABTEQ-S-250
Year: 2025
Stock #: 191260008, Brand: Homag, Model: Cabteq S-250, Serial #: 0-306-73-1892, Year: 2025, Approx. Shipping Weight: 5000 lbs, Approx. Shipping Dimensions: 155" L x 28" W x 100" H, Carcass Length: 250-2500mm, Carcass width: 250-700mm, Carcass Height: 150-1400mm, Press Capacity (Vertical and Horizontal): ...more
JUST ADDED!
Homag #Cabteq-S-250, case clamp, 12-18 Kn vertical & horizontal press capacity, low hours, 2025
Equipment Hub | Stone Mountain, GA
Category: Clamp - Case & Feed Thru
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Homag
Model: CABTEQ-S-250
Year: 2025
Stock #: 191260007, Brand: Homag, Model: Cabteq S-250, Serial #: 0-306-73-1891, Year: 2025, Approx. Shipping Weight: Approx 5000 lbs, Approx. Shipping Dimensions: 155" L x 28" W x 100" H, Carcass Length: 250-2500mm, Carcass width: 250-700mm, Carcass Height: 150-1400mm, Press Capacity (Vertical and ...more
Interwood #C-4010, Case Clamp, 108" L x 60" H x 27" deep clamping capacity, (10) pressure cylinders w/2.75" stroke, 700 lbs/cylinder pressure @ 100 psi
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Interwood
Model: C-4010
INTERWOOD C-4010 CASE CLAMP: -- :Single-Bay pneumatic Clamp with: 108" Long x 60" high x 27" deep clamping cap. -- :Movable; vertically positioned clamping beam with (2) adjustable horizontal clamps; (3) adjustable vertical clamps.Horizontal & vertical clamps with: (2) Pneumatic cylinders ea. for a total of (10) ...more
Italpresse #SP/1-A, special case clamp, automatic feed through, 2002
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Italpresse
Model: SP/1-A
Year: 2002
ITALPRESSE SP/1-A SPECIAL CASE CLAMP (AUTOMATIC FEED THROUGH): -- :Case goods capacity: 92" (2,340 mm) max. & 12" (300 mm) min. length; 48" (1,220 mm) max. & 10" (250 mm) min. height, 27.5" (700 mm) max. width. -- 10' (3,500 mm) Infeed belt conveyor, 14' (4,267 mm) overall belt length inside clamp ...more
Italpresse #SP/1-A, Automatic Through-Feed Case Clamp, 29.5" clearance, 480 V., 92 FPM belt, new
RT Machine | Hughesville, PA
Category: Clamp - Case & Feed Thru
Seller: RT Machine
Location: Hughesville, PA
Mfr: Italpresse
Model: SP/1-A
Italpresse Model SP/1-A Automatic Through Feed Case Clamp Maximum working depth:.700 mm (27.6") Minimum working depth: 250 mm (9.8") Maximum working length: 2,500 mm (98") Minimum working length: 300 mm (11.8") Maximum working height: 1,220 mm (48") Minimum working height: 300 mm. (11.8") Maximum through-feed ...more
JUST ADDED!
Italpresse #SP1-A-Special, Feedthrough Case Clamp, 78.7" x 59" x 27.6" max, 2026
Carolina Machinery Sales | Monroe, NC
Category: Clamp - Case & Feed Thru
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Italpresse
Model: SP1-A-SPECIAL
Year: 2026
2026 Italpresse SP1-Special *NEW PLC* AUTOMATIC CASE CLAMP, With Warranty, Heavy Duty Hydraulic Case Clamp, Max Cabinet Dimentions, 2,000 mm Length, 1,500 mm Height, 700 mm Depth.
Lancaster, Case Clamp, 26" x 96" x 80", 3HP, 12" bore, 4" cyl, AS IS
RT Machine | Hughesville, PA
Category: Clamp - Case & Feed Thru
Seller: RT Machine
Location: Hughesville, PA
Mfr: Lancaster
Max Capacity Opening: 96" x 26" wide x 80" high Motorized Open/Close with Approximately 3HP, 3 Ph Motor Powered by One 12" Bore, 4" Adjustable Stroke Air Cylinder Furnished complete with two foot control switch units, air regulator with gauge air filter and air lubricator Serial No. 1125-E-69 NOTE THAT THERE SHAFT FOR ...more
Homag / Ligmatech #MDE-200, Feed Through Case Clamp, 24" x 98.4" x 51.2" capacity, w/ 118" conveyors, Homatic Control
Carolina Machinery Sales | Monroe, NC
Category: Clamp - Case & Feed Thru
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Ligmatech
Model: MDE-200
Year: 2008
Maximum workable width of 24.02 inches (610 mm), Maximum workable length of 98.43 inches (2500 mm), Maximum workable height of 51.18 inches (1300 mm), Minimum working height of 9.84 inches (250 mm), It includes a preloading conveyor and an offloading conveyor, each measuring 118.11 inches (3000 mm) in length. The ...more
Manea #MP-52, Case Clamp, 52" capacity, 1995
Carolina Machinery Sales | Monroe, NC
Category: Clamp - Case & Feed Thru
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Manea
Model: MP-52
Year: 1995
Two Bay, 52" capacity, Pneumatic clamping.
Manea #MP-52, Case Clamp, 52" capacity, pneumatic clamping, two bay, 1995
Carolina Machinery Sales | Monroe, NC
Category: Clamp - Case & Feed Thru
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Manea
Model: MP-52
Year: 1995
Two Bay, 52" capacity, Pneumatic clamping.
Omec #SBM-1200, Drawer Box Clamp, 180 BPH, PLC, new
RT Machine | Hughesville, PA
Category: Clamp - Case & Feed Thru
Seller: RT Machine
Location: Hughesville, PA
Mfr: Omec
Model: SBM-1200
Omec Model SBM 1200 Drawer Box Clamp Technical Data Power installed on the machine: 1.12 Kw Working pressure: 0.4 MPascal Boxes production: 180 n/h Workpiece Limits Draw Length: min. 100mm max. 1050mm Draw Width: min. 70mm max. 400mm Draw Thickness: min. 2mm max. 15mm Standard Equipment Hydraulic Manual clamp has been ...more
Omec #SCM-1200, Drawer Box Clamp, 60 BPH, PLC, new
RT Machine | Hughesville, PA
Category: Clamp - Case & Feed Thru
Seller: RT Machine
Location: Hughesville, PA
Mfr: Omec
Model: SCM-1200
Omec Model SCM 1200 Hydraulic Drawer Clamp Technical Data On board machine installed power: 0.5 HP Working pressure: Mpascal 0.7 Drawer production output: Up to 60 boxes/hour Workpiece Limits Draw Length: min. 250mm max. 1200mm Draw Width: min. 240mm max. 600mm Draw Thickness: min. 60mm max. 260mm Standard Equipment ...more
SCM #Action-E, semi-auto case clamp, 2019
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: ACTION-E
Year: 2019
SCM - ACTION E: Case Clamp (Semiautomatic) -- Max. standard working dimensions: 2,400 mm (94") Wide x 1,100 mm (43") high x 700 mm (27-1/2") depth. -- Min. standard working dimensions: 250 mm (9.8" Wide x 270 mm (10.6") high x 150 mm (5.9") depth. -- Working height: 600 mm (23.6"). -- Vertical pressing force: 15 KN ...more
SCM #Action-FL, semi-auto case clamp, 2022
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: ACTION-FL
Year: 2022
SCM - ACTION FL 2500: Case Clamp (Semiautomatic) -- Max. standard working dimensions: 2,500 mm (98.4") Wide x 1,250 mm (49.2") high x 800 mm (31-1/2") depth. -- Min. standard working dimensions: 250 mm (9.8" Wide x 250 mm (9.8") high x 150 mm (5.9") depth. -- Working height: 508 mm (20"). -- Vertical pressing force: ...more
SCM #Action-FL-2500, semi-auto case clamp, 98.4" W x 49.2" H x 31.5" D, 2017
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: ACTION-FL-2500
Year: 2017
SCM - ACTION FL 2500: Case Camp (Semi-Automatic) -- Max. standard working dimensions: 2,500 mm (98.4") Wide x 1,250 mm (49.2") high x 800 mm (31-1/2") depth. -- Min. standard working dimensions: 250 mm (9.8" Wide x 250 mm (9.8") high x 150 mm (5.9") depth. -- Working height: 508 mm (20"). -- Vertical pressing force: ...more
SCM #Action-FL-2500, case clamp, 2017
iBid Machinery | Roswell, GA
Category: Clamp - Case & Feed Thru
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Scm
Model: ACTION-FL-2500
Year: 2017
Product : 2017 SCM CPC Action Case Clamp - Arizona, Machine Location State: Arizona, Machine Location City: Phoenix, Year: 2017, Make: SCM CPC, Model: CPC Action FL, Serial No: 102.051, Phase/Voltage: 3PH, Condition: Very Good Used Condition, Any Known Issues: No, In Production: Yes, Product Type: Clamp, Access to ...more
SCM #Action-TF-2500, automatic feed thru case clamp, 98.4" x 49.2" x 31.5" capacity, 2022
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: ACTION-TF-2500
Year: 2022
SCM - ACTION TF 2500: Case Clamp (Automatic Feed Through) -- Max. standard working dimensions: 2,500 mm (98.4") Wide x 1,250 mm (49.2") high x 800 mm (31.5") depth. -- Min. standard working dimensions: 250 mm (9.8" Wide x 250 mm (9.8") high x 250 mm (9.8") depth. -- Working table height: 600 mm (23.6"). -- Max. ...more
Uhling #HP-2000, Case Clamp (Pneumatic), 50" x 42" x 24" clamping, 3.5" stroke
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Uhling
Model: HP 2000
UHLING - HP 2000: Case Clamp (Pneumatic) : -- Offers a compact, quick, and easy-to-use Case Clamp. -- 50" x 42" x 24" Clamping cap. that handles.80% - 90% of your case good needs. -- (2) Counterweight balanced; fully adjustable horizontal dual air pod pressure bars. -- 3-1/2" Stroke with: Individual controls for each ...more
Uhling #HP-3000, Case Clamp, Single-Bay, 55" L x 96" H x 24" D Clamping capacity, 3.5" Air Pod Stroke, 120 psi
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Uhling
Model: HP 3000
UHLING - HP-3000: Case Clamp (Single-Bay) -- Clamping capacity: 55" L x 96" H x 24" D; Large enough for multiple boxes; offers versatility, quick 30-Sec setup or changeover. -- Pressure Elements:(4) Dual air pod pressure bars that are pneumatically activated; counterweight balanced: Just position them effortlessly and ...more
JUST ADDED!
Uhling #HP-3000, Single-Bay Case Clamp, 55" L x 96" H x 24" D clamp, 3-1/2" airpod stroke, 0-125 psi pressure adjustment
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Uhling
Model: HP 3000
UHLING - HP-3000: Case Clamp (Single-Bay) + Optional Top Clamp w/extensions -- Clamping Capacity: 55" L x 96" H x 24" D; Large enough for multiple boxes.Offers: Versatility; quick 30-Sec setup or changeover. -- Pressure Elements -- (4) Dual AirPods pressure bars that are pneumatically activated; counterweight ...more
Uhling #HP-3000, single bay case clamp, 55" L x 96" H x 24" D capacity
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Model: HP-3000
UHLING - HP-3000: Case Clamp (Single-Bay) -- Clamping capacity: 72" L x 74" H x 24" D; Large enough for multiple boxes; offers versatility, quick 30-Sec setup or changeover. -- Pressure Elements(4) Dual air pod pressure bars that are pneumatically activated; counterweight balanced; just position them effortlessly and ...more
Uhling #HP-3000, single bay case clamp, 72" L x 74" H x 24" D capacity
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Model: HP-3000
UHLING - HP-3000: Case Clamp (Single-Bay) -- Clamping capacity: 72" L x 74" H x 24" D; Large enough for multiple boxes; offers versatility, quick 30-Sec setup or changeover. -- Pressure Elements(4) Dual air pod pressure bars that are pneumatically activated; counterweight balanced; just position them effortlessly and ...more
Uhling #HP-4000, semi-auto case clamp, 100" W x 50" H x 24" D
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Model: HP-4000
UHLING - HP 4000,.Case Clamp (Semi-Automatic) -- 100" Wide x 50" high x 24" deep clamping cap. and built with a Heavy wall steel frame construction. - Super "easy & quick" manual positioning of vertical side pressure carriage and top pressure beam. -- Includes: Push button release, pneumatic locking and ...more
Pro-Edge Technology #SqueezeTight, automatic feed through case clamp, 2026, new
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Model: SQUEEZETIGHT
Year: 2026
PRO-EDGE TECHNOLOGY SQUEEZETIGHT CASE CLAMP (AUTOMATIC FEED THROUGH): -- :The SqueezeTight automatic hydraulic case clamp does the work for you. The vertical pressing system with motors & independently controlled crossbars move according to the size of the piece to be pressed, mobile parts slide along linear ...more
Erregi #Technopress-VR2, Automatic Feed Through Case Clamp, 98" L x 27.5" depth x 48" H working capacity, 1400 staple magazine capacity, 2026, new
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Model: TECHNOPRESS-VR2
Year: 2026
ERREGI TECHNOPRESS VR2 CASE CLAMP (AUTOMATIC FEED THROUGH) With E/S 250 Automatic Stapling System: -- :Min. / Max Working Height: 300 / 1,20 mm (11.8" / 47.2") -- Min. / Max Working Length: 300 / 2,500 mm (11.8" / 98") -- Min. / Max Working Depth: 200 / 700 mm (7.9" / 27.5") -- Once the piece of furniture is assembled ...more
