go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Belt Filters

warning
26 Results

2' x 16' Eimco, Belt Filter Press, (2) 3.75 HP motors, 187:1 speed reducer ratio

Savona Equipment | Savona, BC
Category: Belt Filters
Seller: Savona Equipment
Location: Savona, BC
Mfr: Eimco
Eimco 24in Wide x 16ft Long Belt Press, Make: EimcoSize: 24in Wide x 16ft LongCondition: Used ConditionDrive: (2) Electric Motors Power Output: 3.75HPSpeed Reducer: Ratio: 187:1Torque: 23,815in-lbsInput Power: 2.42HPRotation Speed: 1,260RPM, Overall Dimensions: Length: 23ftWidth: 6ftHeight: 8ft 8inWeight: Approx. ...more

2.4' x 18.6' Eimco Expressor #1PA, Stainless Steel, 12" face, 8' 1" H, 6500#, hyd.dr, 50 HP, 230/460 V.hyd.pump, #21664

Federal Equipment Company | Cleveland, OH
Category: Belt Filters
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Eimco
Used Eimco Expressor Continuous Dewatering Belt Filter, 12" face, Model 1PA, stainless steel construction, hydraulically driven with 10 H.P. 230/460 volt hydraulic pump, tension controls, 18'6" long x 4'5" wide x 8'1" high, approx. 6500#, Serial No. 82216-01-AR.

3.6' x 30' Eimco, 316 Stainless Steel horizontal vacuum belt filter, 4-lane applicator head, 4 overhead spray bars

Cooper Industries Llc | Millwood, WV
Category: Belt Filters
Seller: Cooper Industries Llc
Location: Millwood, WV
Mfr: Eimco
ITEM 2448: 42” WIDE X 30’ LONG EIMCO 316 STAINLESS STEEL HORIZONTAL VACUUM BELT FILTER, 4 LANE APPLICATOR HEAD;, PNEUMATIC ADJUSTMENT ON ROLLERS, 4 OVERHEAD SPRAY BARS, (3) 24” DIAMETER X 60” HIGH FILTRATE TANKS, (3) EIMCO 1 x 8 STAINLESS STEEL CENTRIFUGAL PUMPS, TRAVAINI TYPE TRSC 100-700/O/P ...more

5.2' Textile Eng. #Durapress-1.6M, belt press, 1.6 meters, sludge dewatering, refurbished, #1271543

Plantex Equipment Co | Alvin, TX
Category: Belt Filters
Seller: Plantex Equipment Co
Location: Alvin, TX
Year: 1981

5.5' x 18' Komline Sanderson #0.5m X 2.25m, Horizontal Vacuum Belt Filter, Stainless Steel, 8' high, 12 HP, 480 V

Machinery & Equipment Co | Brisbane, CA
Category: Belt Filters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Komline Sanderson
Komline Sanderson Horizontal Vacuum Belt Filter, ADPEC K-S type, model.5m X 2.25m, effective filtration area of 12.1 SF, ADPEC deck measures 5.5' wide X 18' long X 8' high. 3 phase, 480 V, 60 Hz, 12 HP. Complete with controls. Manuals and drawings are available. Last used in R&D project and in very ...more

Get email updates for newly added Belt Filters

Belt Filters (also known as filter belts or conveyor belt filters) are filtration systems that use a moving belt to separate solids from liquids. Commonly used in industries like wastewater treatment, mining, and food processing, these filters provide continuous filtration with high efficiency. Belt filters are essential for handling large volumes of materials, ensuring consistent separation and improving the overall filtration process in industrial applications.

6.5' Phoenix Process Equipment Co #WX-6.5', 2 meter belt filter press, Control panel, controller

D'Angelo International | Bellingham, WA
Category: Belt Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Phoenix
- 2 meter belt filter press manufactured by Phoenix Process Equipment Company, - Previous application: gravel washer, - Model WX-2.0, - Includes control panel, - Includes controller, - Made in USA.

6.7' x 34.3' Andritz #CPF2.0-Meter-SMX-P3, Belt Filter Press, 78.7" working width

Savona Equipment | Savona, BC
Category: Belt Filters
Seller: Savona Equipment
Location: Savona, BC
Mfr: Andritz
Andritz CPF 2.0 Meter SMX-P3 Belt Filter Press, Make: AndritzModel: CPF 2.0 Meter SMX-P3Type: Belt FilterCondition: Used ConditionBelt Width: 2,100mm WideTop Belt Length: 10,600mm LongBottom Belt Length: 11,300mm LongType of Sludge: 90% Fiber from CTMP Pump MillInlet Consistency: 3% DSWorking Width: 2,000mmDistance ...more

6.8' x 3.25' Vacuband #B005, Stainless Steel, 9" H vacuum cover, pneumatic operation, controls, on base, serial #27435, #16578

Federal Equipment Company | Cleveland, OH
Category: Belt Filters
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Vacubend
Used Vacuband Filter, Model B005, stainless steel contruction, 20" wide X 40" long X 9" high vacuum cover, pneumatically operated, with controls on base, Serial # 27435.

8' x 24' Eimco, Horizontal Vacuum Belt Filter, 189 sq.ft., 25 HP, Varispeed Drive

A M King Industries | Oroville, CA
Category: Belt Filters
Seller: A M King Industries
Location: Oroville, CA
Mfr: Eimco
EIMCO Horizontal Vacuum Belt Filter, 8' x 24', 189 sq. ft., 25 HP Varispeed Drive.

8' x 24' Eimco, Horizontal Vacuum Belt Filter, 189 sq.ft., 25 HP, Varispeed Drive

A M King Industries | Oroville, CA
Category: Belt Filters
Seller: A M King Industries
Location: Oroville, CA
Mfr: Eimco
EIMCO Horizontal Vacuum Belt Filter, 8' x 24', 189 sq. ft., with 25 HP Varispeed Drive.

8' x 24' Eimco, Horizontal Vacuum Belt Filter, Stainless Steel & Fiber glass constr., 189 sq.ft. filter area, 25 HP

Machinery & Equipment Co | Brisbane, CA
Category: Belt Filters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Eimco
Horizontal vacuum belt filter, 8' wide x 24' long, 316 stainless steel and fiberglass construction. Eimco number 9624. Filter has 189 sq.flat top. filter area. Driven by 25 HP vari-speed (1180/178) Reeves drive, gearbox, and roller chain drive. Unitized on structural steel frame., Square Ft.: 189 ...more

8' x 24' Eimco, Horizontal Vacuum Belt Filter, Stainless Steel & Polypropylene constr., 189 sq.ft. filter area, 25 HP

Machinery & Equipment Co | Brisbane, CA
Category: Belt Filters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Eimco
Eimco horizontal vacuum belt filter, measures 8' wide x 24' long, stainless steel and polypropylene contact parts with a rubber belt and filter cloth. Rated for 189 square feet filter area. Driven by 25 HP variable speed main motor drive, stainless steel drip pan, four zone with vacuum hook-up lines, etc. ...more

8' x 87' Phoenix #WX-2.5, Belt Filter Press, 536" top belt width, 7.5 HP Reliance motor, 100 GPM @ 100 psig spray water, 575 Volt, 3PH

Savona Equipment | Savona, BC
Category: Belt Filters
Seller: Savona Equipment
Location: Savona, BC
Mfr: Phoenix
Phoenix WX-2.5 Belt Filter Press, Make: PhoenixModel: WX-2.5Type: Belt FilterCondition: Used ConditionBelt Width: 100inUpper Belt Length: 536inLower Belt Length: 1046inSpray Water: 100 GPM @ 100psigAir: 100psig, 3ft³/m, Clean and Dry, Drive: Reliance Electric Motor Power Output: 7.5HPVoltage: 575 VoltsPhase: ...more

6' Eimco #Expressor, belt press, Stainless Steel frame (2 available)

Sully Enterprises | West Jordan, UT
Category: Belt Filters
Seller: Sully Enterprises
Location: West Jordan, UT
Mfr: Eimco
Qty 2, Eimco Expressor Belt Presses, 6ft (2M) belt, Stainless Steel Frame, For more information, contact [email protected].

Clearstream #MMF-39-60-SS, Indexing Media Filter, 100 USGPM @ 5 Micron, 11 gauge, 48" x 72" x 24" Filter tank, 1/2 HP, 110 V

Aaron Equipment Co | Schaumburg, IL
Category: Belt Filters
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Clearstream
used- clearstream mmf-39-60-ss indexing media filter, 100 usgpm @ 5 micron, 11ga, 304 ss construction, aluminum seal wheels, ss drive shaft, uhmw sprockets float sensor and customized electronic control panel for auto media indexing,110v, 60hz, 1/2hp motor, 76" x 60" x 24" and indexing filter tank 304 stainless ...more

Compositech #4630, belt filter press, 135 sq.ft., 60" belt, 36.5' long, 20 HP total, 300 GPM, Nash vacuum pump

D'Angelo International | Bellingham, WA
Category: Belt Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Compositech
- Horizontal belt filter press, - 135 square foot filtration area, - 60 in belt, 36.5 ft long, -20 HP total, - Requires 40 GPM at 50 PSI water, - Requires 2 CFM at 100 PSI air, - 300 GPM design capacity, - Gear reducer, 59:1 reduction ratio, Nash vacuum pump:, - 400 RPM, - 150 HP 1,180 RPM and 460V, - 12 inch motor ...more

Compositech #5528, belt filter press, 135 sq.ft., 60 GPM @ 50 psi, 2 CFM @ 100 psi, 20 HP

D'Angelo International | Bellingham, WA
Category: Belt Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Compositech
- Refurbished model 5528 Compositech belt filter press, - Filtration area: 135 square feet, - Water usage: 60 GPM at 50 PSI, - Air requirements: 2 CFM at 100 PSI, - 20 HP drive train with VFD-ready motor, - Gear reducer with 2.0 service factor, - SKF bearings, - Feed box, - Lubrication system, - Discharge chute, - ...more

Compositech #4612, belt filter press, Automatic belt steering, Stainless Steel frame Remanufactured

D'Angelo International | Bellingham, WA
Category: Belt Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Compositech
- Remanufactured belt filter presses, - 2 units available, - Weighted rollers, - Shaft mounted gear motor, - Vacuum pan, - Drain pans, - Automatic belt steering, - EPDM main drainage belt: 95% of new condition, - Large capacity feed box, - Stainless steel frame, - New drive motor, - All new seals, bearings, slide ...more

Eimco #4630, Horizontal Belt Filter, 135 sq.ft., Remanufactured

A M King Industries | Oroville, CA
Category: Belt Filters
Seller: A M King Industries
Location: Oroville, CA
Mfr: Eimco
Remanufactured EIMCO Model 4630, 5' Wide x 36' 6" L, Horizontal Belt Filter - Active Filtration Area: 135 sq. ft..

Eimco #9624, Horizontal Belt Filter, 192 sq.ft. Filter Area, (2) 3" Filtrate Pumps, (2) 42" diameter x 7' H Filtrate Tanks, 8' diameter x 8' H Feed Tank, 25 HP

Perry Videx LLC | Hainesport, NJ
Category: Belt Filters
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Eimco
Used Eimco model 9624 horizontal belt filter with 316 stainless steel and fiberglass reinforced plastic contacts. 25 HP varispeed Reeves drive and 43/1 gearbox. Roller chain drive from gearbox to head pulley. Belt speed variable from 6-48' per minute. 192 sq. ft. of filtering area. All unitized on a structural ...more

Jord/krupp, Horizontal Vacuum Belt Filters, 4.2' m width x 109' m2, 3 Units, Unused

A M King Industries | Oroville, CA
Category: Belt Filters
Seller: A M King Industries
Location: Oroville, CA
Mfr: Jord/krupp
3 Units - UNUSED JORD KRUPP 4.2m Horizontal Vacuum Belt Filters.

P.E.W.E. Dewater Systems belt filter press, #2791-1

Federal Equipment Company | Cleveland, OH
Category: Belt Filters
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: P.e.w.e.
Used P.E.W.E DeWater Systems belt filter press, model DBP-705, stainless steel feed pan, nominal capacity.5 - 3 cu meters/hour, approximately.5 meter wide belts with.75 hp and 2 hp, 230/460 volt belt motors, pneumatic belt tension adjustments, multiple spray wash bars, doctor knife solids discharge, built 10/2012.

Pannevis #RT, Vacuum Belt Filter, 57 sq.ft. filter area, 316 Stainless Steel & Polypropylene, 0.75 KW variable speed, 380 V., carbon steel frame mount, 1981

Aaron Equipment Co | Schaumburg, IL
Category: Belt Filters
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Pannevis
Year: 1981
used- pannevis horizontal vacuum belt filter, type rt, 316 stainless steel/polypropylene construction. approximate 5.3 square meter filtration area. filter 960 x 5600mm. vacuum tray. driven by a.75 kw, 3/50/380 volt varispeed motor. mounted on a carbon steel frame. our freight specialists can assist you with door to ...more

Phoenix #WX-2.5' belt filter sludge press, 536" upper belt length, 1045" lower belt length, 100" belt width, 7.5 HP

Lenmark Industries | Langley, BC
Category: Belt Filters
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Phoenix
SKU: 129764, Model: WX -2.5, Condition: Used, Additional :, Drive motor: 7.5 hp, 575 volts, 3-phase, Spray water: 100 gpm @ 100 psig, Air: Clean and Dry, 100 psig, 3 scfm, Belts:, - Upper belt length: 536", - Lower belt length: 1045", - Belt width: 100", - Heavy-duty all-welded main frame.

Thryssen Krupp #42 B9 V3, Vacuum Belt Filters, 1175 squaring ft, mild steel frame, 4.2 meter 4-ply transport belt, Unused

D'Angelo International | Bellingham, WA
Category: Belt Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Thryssen Krupp
- 3 units available, unused surplus, - 109 square meter filtration area (1,175 square feet), - Model 42 B9 V3, - Frame constructed from mild steel, - 1430 mm rubber lined head and tail pulleys, - 4.2 meter 4-ply transport belt, - Belt drive with TECO Westinghouse motor, - 2.0 meter diameter filtrate receiver, - Nash ...more